Wty issue - Can't Posted due to error Action T043 Post version IV to FI

Hi Experts,
I have one problem which is some of the wrty claims can't posted due to error message
log not found (in memory ) and also Action T043 POst version IV to FI not carried out as there was an error in a previous version.
For info, the earlier, yes this claim have error but already rectify. However still can't posted.
Hence, request your advise how to resolve my problem...
rgds,

After a lot of searching I finally found the solution to my problem. I had to enable IOMMU in the BIOS on my motherboard (Gigabyte 970A-D3).
In case it helps someone else, I found the solution in the following forum post:
http://ubuntuforums.org/showthread.php?t=2114055
Another related post is:
http://ubuntuforums.org/showthread.php?t=2111223
As an aside, I'm not really sure why when IOMMU is disabled, 32-bit kernels work, but 64-bit kernels don't. I'm guessing IOMMU support is disabled in 32-bit kernels while it is enabled in 64-bit kernels. Or, it is at least handled differently.
Last edited by tlawren (2013-03-12 13:20:35)

Similar Messages

Erro"Transaction cannot be posted due to errors in price determination"MIGO

Hi All,
I am facing error message "Transaction cannot be posted due to errors in price determination" for "X-field conversion" while posting GR document against Scheduling agreement.
I have checked the Validity periods of conditions maintained in Scheduling agreement and it was within validity.
In Material master - Price Control - V (Moving average price/periodic unit price)
Standard price              0.00
Per. unit price             1.58
Price unit             1
Please help me to resolve this issue.
Cheers!
Sujay Chinchole

your material master displaying Zero price .maintain the price in material master.and also check why material has Zero price.
what is the price in material moving average field
Edited by: Sridhar Jayavarapu on Mar 13, 2009 7:17 AM

Error: Transaction cannot be posted due to errors in price determination

Hi,
I am facing below error when i try to post GR for a SA. I checked out all the configurations, these worked on GR for PO but not on SA.
I have seen other posts which recommend to view OSS note 447374 and 446831. I am not sure where to find these and how to use these notes.
Please help!.
Thanks
Ramya

Here you go
Transaction cannot be posted due to errors in price determination
Message no. ME573
Diagnosis
The error marked with 'X' occurred during the price determination process for purchasing document 201 00010:
[ ] Net price is 0.
[ ] Net price is negative.
and/or there are no valid conditions or the duration of the
contract has ended.
[ ] Effective value is negative.
[X] Mandatory condition missing.
[ ] Negative delivery costs.
[ ] Delivery costs have been recorded although invoice
receipts are not defined for the item.
[ ] Error during quantity conversion
[ ] Error during currency translation
[ ] Field overflow
[ ] A condition involving delivery costs exists without a
transaction/event key.
[ ]Error during maint. of delivery costs in master conditions
Delivery cost conditions in different validity periodsnot identical
System Response
The transaction cannot be posted without successful price determination.
Procedure
Check the purchasing document and the associated conditions:
Display purchase order
Display scheduling agreement
If the problem cannot be resolved in this way, contact your system administrator.
The latter can check the Customizing settings for price determination in Purchasing under Conditions -> Define Price Determination Process
When the foregoing steps have been carried out, try posting the transaction again.

Transaction cannot be posted due to errors in price determination

Hi
when I made the receipt of goods by MIGO the system to me gives me the following message blocking:
" Transaction cannot be posted due to errors in price determination
   Message no. ME573 "
Thainks in advance

Hello
Please refer the message long text and just check based on the suggestions given :
Short Text
Transaction cannot be posted due to errors in price determination
Diagnosis
The error marked with 'X' occurred during the price determination process for purchasing document :
[ ] Net price is 0.
[ ] Net price is negative.
           and/or there are no valid conditions or the duration of the contract has ended.
[ ] Effective value is negative.
[ ] Mandatory condition missing.
[ ] Negative delivery costs.
[ ] Delivery costs have been recorded although invoice receipts are not defined for the item.
[ ] Error during quantity conversion
[ ] Error during currency translation
[ ] Field overflow
[ ] A condition involving delivery costs exists without a transaction/event key.
[ ]Error during maint. of delivery costs in master conditions
              Delivery cost conditions in different validity periods not identical
System Response
The transaction cannot be posted without successful price determination.
Procedure
Check the purchasing document and the associated conditions:
Display purchase order
Display scheduling agreement
If the problem cannot be resolved in this way, contact your system administrator.
The latter can check the Customizing settings for price determination in Purchasing under Conditions .
warm regards
Ramakrishna

Transaction cannot be posted due to errors in price determination - MIGO

Hi,
I have made PO with reference to the contract. While posting the MIGO error message displays as "Transaction cannot be posted due to errors in price determination. But with same combination ( Materials and Vendor which were used in Po from Contarct) was used to prepare a PO with out any reference, subsequent MIGO transaction was saved without any error msg. This problem is happening the MIGO through PO reference of Contract or MIGO for schedule line agreement. So your help pls.
Veera.

hi
u have to check Note 1059878 - Error after the Note 1043857
Summary
Symptom
1.When you try to post a goods receipt (MB01/MIGO) against the purchase order, you get an error ME 573 "Transaction cannot be posted due to errors in price determination". This is caused by the code from the Note 1043857.
2.Also,when you have note 1043857 implemented and then try to do a price comparison (ME49)among the RFQ,you see the message 06 616 'selected quotations not directly comparable'.This is again caused by the code from the Note 1043857
Other terms
UNICODE, GTKOMK-KEY_UC, GTKOMK, MIGO, ME49,Price comparison, 06 616, ME 573
Reason and Prerequisites
This happens after the code from the Note 1043857.
Solution
Please apply the code correction below.
regards
KI

Error: "Transaction not posted due to errors in price determination"

Hello,
Please tell me why this error occurs "Transaction not posted due to errors in price determination"
for purchasing document.
I have checked the PO and it contains all the valid pricing details.
Then why the error?
Thanks & Regards,
Priyanka

Hai
Check ur Pur.Grp and the Vendor U are using some time u may be using the differrnt vendor grp and pur grp or pur org thru which the pricing procedure hets triggered
thnk u
with rgds
moosa anis

Transaction cannot be posted due to error in price determination

Hi Experts,
I am procuring components thro purchase order created on 2007.
When i tried to do GR with respect to Inbound delivery, it is throwing error as " Transaction cannot be posted due to error in price determination"
Please suggest.

Hi,
1. Check accounting view of material in material master.
2. Check Conditions is available or not in MEK3 t.code
3. OR see OSS notes 447374 and 446831 and 457511
Regards,
Biju K

Can't install due to error

I have tried to update to mavericks. I had no issues downloading it, but when I tried to install it said error, try going to dis utility to repair. I tried that. It diednt work, I have also tried to go to the recovery disk utility and it hasn't worked either.what can I do?

I tried to install again to see what the exact error message was, but now all I get is a Microsoft message that says "Adobe Flash Player Installer has encountered a problem and needs to close." I have been having other problems installing other products and have been getting messages like "Entry Point Not Found" followed by messages like"entry point...could not be located in the dynamic link library".
I don't know exactly what "repaired" means in installing an OS. What I did was use my reinstall Windows OS disc and follow the instructions for a "clean" install. The prompts say that my files will be wiped out, and that programs will have to be reinstalled. When promted to pick a partition I always pick the default of a 50/50 split of the hard drive.

IPad can't sync due to errors 1139 and 13011 - help!

Hi guys,
I've been having all sorts of iTunes issues lately, including the infamous "The information on this page is out of date" message when updating my apps. Following Apple's directions, I completely uninstalled iTunes (including the .kext's), and subsequently reinstalled it. Happily, the error I mentioned went away, and my iPhone 3GS is syncing happily.
Unfortunately, my iPad is suddenly choking iTunes when I try to sync it. I first get a box stating "The iPad "My iPad Name" cannot be synced. An unknown error occurred (1139)." When I hit the "OK" button, it acts as though it is syncing, but then I get a similar error with the code "13011". The error alert for error 13011 pops up repeatedly, although the iPad does appear to sync throughout.
I also notice two other oddities:
First, if I leave the iPad plugged in, it continually attempts to sync, coughs up the error code 13011, the iPad goes back to the home screen, and ~30 seconds later it attempts to sync again.
Second, every time it tries to sync, it's also claiming to be updating the same 7 apps, over and over. I don't see any obvious connection between the updates, other than that they're fairly recent updates (last ~2 days or so).
What's going on? My iPad has been freshly restored just a few days ago, and is working fine otherwise. Any ideas?
Thanks,
Huxley

I had the same problem (13011) until today, but with the iPhone. What I did was remove all music files from the iPhone, deactivate Genius, quit iTunes, delete the Genius database in the iTunes folder, empty the trash, restart iTunes, reactivate Genius, and sync. Looks like the error is gone.

The file can't open due to error.

This message can appear if a file has been saved with permissions. Permissions, also known as rights or privileges, can be applied to a file, folder, or almost any resource available from a network (printers, shares, files, databases, Web sites, etc). When
a user attempts to open a resource that requires specific user permissions, this message will appear if the user does not have the required permissions.
Permissions can be set for individual users, groups of users, or for a specific computer. Usually, this message appears if you are using a network to which administrators have applied permissions for specific users and groups, or if you are accessing a resource
local to a specific user's computer, but are blocked because of local permissions that have been set by that user. If you cannot open a resource on a file server or other computer on your network, you will most likely need to review your user account settings
to determine whether you have the necessary permissions to gain access to the resource. If you do not know whether you have the necessary permissions, contact your network administrator or the owner of the computer with the shared resources.
Usually, this message does not appear if you are using disk drives formatted with a FAT or FAT32 file system. Drives formatted with NTFS, HPFS, or another file format that provides the ability to apply permissions, are capable of forcing this message.
Occasionally, the computer that grants users access to a network can lose the information that is used to authenticate a specific user. When this happens, the only option available is to turn your computer off for thirty seconds, and then restart your computer
(you must turn off the computer to clear the cached information in the network card). Restarting may reset the authentication information that is used to grant you access to the network. If this does not work, you must contact the network administrator to
have your account reset. It is also possible that the network administrator has disabled your account.
There is also the possibility that the file you are attempting to open is restricted through Information Rights Management (IRM). IRM is an alternate form of file restriction access that allows creators of a file the ability to limit editing, copying, printing,
or forwarding of content. If the file is restricted and you require access to its contents, you must contact the creator or owner of the file to request that they add your user ID to the list of users who are allowed to access the file.
Md. Ramin Hossain

Hi,
Thanks for your sharing, hope this article is helpful with others who had similar problem.
Roger Lu
TechNet Community Support

Safari keeps reloading due to Error on page - IOS Version 8.1.3? Any help on this please

Hi. My 16Gb Ipad which is running 8.1.3 software has started to have a problem when using Safari. It takes longer to load a page and then sometimes the page I am on disappears and a message comes up saying 'Error on page Web Page reloading. Does anyone have an idea what is causing this as it has only started since uploading the latest version of software? Thanks

Pierre,
Oddly enough, when cucm was upgraded to 8.0.3 we had uccx running for approx. one month without any of this monitoring / recoding issues. Cucm was upgraded on September end and we started only to have issues on middle november with ccx. We are suprised how ccx monitoring / recording services were working properly for this long and suddenly stopped working. We are on hope that we could find / do any workaround on this issue. However, if we do not have other option unless going for 8.0.2...then we have to go for. Also, IF after this major upgrade 7.0.1 SR5 --> 8.0.2 the issue does not get fixed?
thanks for your inputs.
Regards,
Thiago

When i try to open email (thunderbird) this is what I get: Error platform version is not compatible with minVersion =1.9.2.15 maxVersion =1.9.2.15 I understand this is a firefox issue. can you help? thanks, Jane

i have also tried to uninstall firefox to no avail
when i try to download 3.6.15 it works to 100% then is searching for viruses and there it stops.
i can get on the internet with firefox... but can't get to my email using thunderbird... but i was told the problem is a firefox issue.
yikes. i'm in over my head.

I had already tried a reinstall before, but thanks for the suggestion. Starting FF in Safe mode did not help either.
XULRunner is specific to FF. Mostly found discussion about using the code in web pages when I used Google before posting.
When FF went from version 3.6.14 to version 3.6.15 this issue started. Please note the Error message and the version info I just mentioned.
'''"Platform version '1.9.2.15' is not compatible with minVersion > =1.9.2.14 maxVersion < = 1.9.2.14"'''
'''The Platform was revved up from 1.9.2.14 to1.9.2.15'''
I could not find information on: minVersion or maxVersion much less how to change them in XULRunner.
'''''It is definitely a Mozilla FF issue'''''.
Avast sandbox is up to date and works just fine with everything else. More importantly it worked just before the update was installed.
The only reason I bothered with the update is because Mozilla touted it as a security issue and there was NO mention of any known issues with sandbox software.

No goods issue can be posted- error in STO

Dear Experts,
I am trying to post GI for an outbound delivery in VL02N.
This delivery was created when I did Goods Issue in MB1B using Mtype : 352 for a Stock Transfer Purchase Order
Kindly note that my Storage Location is WM+HU Managed. I confirmed TO aslo.
While I am trying to do PGI for outbound delivery in VL02N, I am encountered with the error " For item 00010 of purch. order 4500000901, no goods issue can be posted ---   Message no. M7152"*
I am using a PO type for Stcok Transfer and also Item Category is U in PO Line
Kindly help me.
Regards,
Shetty

Hi Shetty,
Can you please review the notes as a possible solution for your issue:
14912 MB1B FM: M7152 No goods issue possible
352735     MIGO for Stock in transfer
Please check following information whether they explain your system
behaviour:
- The document 'UB', with item type 'U', is used just for stock
transfer order within the same company.
- On SD side, the following document types can be used:
NL      Replenishment delivery (without billing document)
          corresponding dummy Sales order DL/NLN(item cat.)/NN(sch.line
NLCC    Cross-company-code replenishment delivery (with bil.document)
          corresponding dummy Sales order: DL/NLC(item cat.)/NC(sch.line
- On MM side
UB Stock transport ord., with "U" item category
NB Standard PO, with "blank" item category
641/647 for STO              assigned to SD schedule line cat NN
643/645 for cross-company    assigned to SD schedule line cat NC
In the standard system, the delivery type NL is used for inter-plant
stock transfer without billing document. For such transfer with
carried out with billing documents, the delivery type NLCC is used.
If you choose 'UB', this means that a stock transfer is to take place
without a billing document. Choose 'NB' if a purchase order involving
delivery and billing document is to be issued.
A combination of delivery type NLCC with purchase order type UB
would not be valid.
In Purchasing,if you create a PO in ME21N where supplying plant and
receiving plant belong to one company code the system will us UB.
If you create a PO where the 2 plants belong to separate company codes
the doc type NB is used.
Best Regards,
Arminda Jack

TS3694 My Iphone 4 comes up with "Cannot restore due to Error 21" - have no idea what this is. When I attach a different Iphone to my PC, it updates & does everything properly, no security settings issues either. Can anyone help please?

My Iphone 4 comes up with "Cannot restore due to Error 21". My security settings are all ok as when I connect another Iphone to my PC, it updates & works fine. Does anyone know what Error 21 means please?

When you searched Google for "iPhone Error 21" what did you find?

Error in third party posting due to missing entry in T51R6_FUNDINFO

Hi,
We are getting error "No entry in table T51R6_FUNDINFO for key xxxxx" while doing third party posting on a particular due date.I tried undo evaluation run through program RPURMD00 but getting a error message "partially posted evaluation runs can not be deleted/undone/reversed". Has anyone faced this issue before and has the solution for it?
Thanks,
Monika

Hi Maddy,
If your issue is not solved, please continue the same old thread instead of creating a new thread. This helps others to follow the discussion and understand the process to resolve the issue.
You have posted this same thread twice and please remove one before the moderator locks it.
Regards,
Ravi

Wty issue - Can't Posted due to error Action T043 Post version IV to FI

Similar Messages

Maybe you are looking for