X-Fi Elite Pro - how to change from Entertainment mode to Audio Creation m

Upon installation of my X-Fi Elite Pro, I was asked to choose one of three options, namely Entertainment, Audio Creation, and Gaming.
I chose Entertainment, simply because I listen to vast amount of music. However, I am also a Digital Music Creation student, so the Audio Creation mode is also appealing. Apparently each of these modes uses different hardware on the X-Fi PCI card.
The trouble is this - is there any way to change the mode in the installed Creative software, or do I have to run the entire installation process every single time I want to change the settings? That's a 20-minute round-trip.

atheos,
You can change mode whenever you wish, just go to Start> All Programs> Creative> Soundblaster X-Fi > Creative Mode Switcher. You can use that to select which mode you need, when you need it. For instance, if you are about to launch a game, switch to game mode first, or if you want to do some recording/audio creation, switch to the audio creation mode.
Cat

Similar Messages

How to change from archive mode to noarchive mode

Hi,
I am running 10gR2 on Windows.
Does any one know the steps to change the database which is current in archive mode to noarchive mode?
Thanks

shutdown immediate
startup mount
alter database noarchivelog;
alter databae open;
archvie log list -- to check whether the archive mode is turned off or no.
Make sure you backup the database before and after.
Jaffar

How to change from FM to AM radio on ipod nano

how to change from FM to AM radio on ipod nano

Meryl-elsbeth,
The iPod Nano only has an FM antenna/receiver. It is not possible to use the AM band on an iPod Nano.

How to change from member to owner 800 # dont work no promps for that

how to change from manager to owner 800# don't work

oops, that was a typo ; prepaid accounts only have Account Members.

I have a MacBook Pro, how to change the computer name in the "Find Iphone"

I have a MacBook Pro, how to change the computer name in the "Find Iphone"?

Thank you for help! I was inattentive reading your answer. The thing which confused me was that I noted in blue. I had to just write in a red box and close the configuration window.

How to change from Photoshop CC to Photoshop Photography Program?

Is it possible for me to do this change? I don't mind to get tied for another year.
Please let me know. Thanks!
P/S: I saw some support staff has been helping to cancel the subscription for Photoshop CC and allow them to subscribe the Photography Program, can I have the same treatment as well? Thanks!

Well it’s not easy it seems. Some got help in two minutes others, like us, nothing?????
Perhaps it only works in the USA not in Europe?
Regards
Jean-Luc.
Verzonden met Windows Mail
Van: M Angus
Verzonden: vrijdag 29 november 2013 18:20
Aan: Pick Axe Photoworks
Re: How to change from Photoshop CC to Photoshop Photography Program?
created by M Angus in Adobe Creative Cloud - View the full discussion
Hello, same here too. How do I change to the Photoshop offer.
I have been trying to speak to Customer Services for 2 days now - despite promise to call me back I am still waiting. (At the time of writing I', listening to that damned musak - waiting waiting....)
Cheers
Magnus Angus
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5885361#5885361
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5885361#5885361
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5885361#5885361. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Satellite C660 - How to change from 32 bit to 64 bit operating system?

Can some one please tell me how to change from a 32 bit to a 64 bit operating system for my Toshiba Satellite C660 Notebook?
No cds came with my notebook so I can't restore.
I installed the 32 bit when setting up by mistake and would now like to change.
Thanks in advance

>No cds came with my notebook so I can't restore.
In user manual you could find a info that recovery disk needs to be created using preinstalled software called Toshiba Recovery Media (disk) Creator
>I installed the 32 bit when setting up by mistake and would now like to change.
The Toshiba image of some notebook models contains the Win 7 32bit and 64bit system.
Not sure if your image supports both versions so cannot say for sure if you would be able to switch to 64bit but try this:
http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
During HDD recovery procedure you should be asked what version you want to chooseof course if both versions would be available so check thisotherwise you will need to purchase an 64bit version.

HT2534 How to change from US apps store to Indian apps store for I Pad

How to change from Us apps store ti Indian apps store to purchase apps

1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you will be located.
8. Tap "Done".
Make sure you have credit card and address for that country.

Yoga 2 Pro -- how to turn off switching mode notifications -- e.g. "tent mode", "tablet mode", etc?

Does anyone know how to turn off the notifications that pop up in the upper right corner telling you that you have just changed from one configuration to another -- e.g. changing from tent mode to tablet mode?
Solved!
Go to Solution.

Just disable it -
Task manager > Startup > Click "Yoga Picks" > Click "disable"
Next time you start your computer no more annoying pop ups. If you want to be annoyed again you can always re-enable it.

How to exit from recovery mode?

how to exit from recovery mode?

You could try a hard reset
- hold the home button and the sleep/wake button down at the same time
- the phone will turn off, when the apple logo appears release both buttons
More than likely after this you will still be in recovery mode. If so then you would need to restore the phone through itunes on a pc/mac.
Hope this helps

I have problem to syncronise my macbook pro to icloud. How to change from Mobileme to Icloud?

How to login from mobileme to Icloud, on Macbook Pro?

Try Repair Permissions. This page tells you how.
http://www.howtogeek.com/195912/how-when-and-why-to-repair-disk-permissions-on-y our-mac/

How to change from SLIM to KDM?

Hello,
I'm using the MATE desktop, OpenBox as window manager and SLIM for login.
I'm starting to feel tired of not being able to change between various desktops without closing the main one, I mean, with OpenSUSE Ctrl+Alt+F1 to F6 are terminal ttys (it is so with Arch+SLIM too), Ctrl+Alt+F7 to F12 are graphical ttys, you can change between any of them and log in as any user you want without closing the F7 tty, or closing it, or doing whatever you want. This was petty cool in order to kill some broken task that hanged the screen or in order to do whatever.
May I don't know how to do it with SLIM, but anytime I do Crtl+Alt+F9, for example, I just got a blank screen with an hyphen blinking. With OpenSUSE I got a graphical login screen.
More:
I've got installed OpenBox, MATE and enlightenment. It is suppose me to be able to change between them pressing F1, and in fact SLIM changes where says "session: XXXX" between them at the login screen, but whatever I choose SLIM ALWAYS log me in MATE. I've got to change it manually in ~/.xinitrc and logout and login again every time I want to change between sessions. I cannot do it directly at the login screen.
Sometimes after login out and login in several times SLIM hangs and I have to reboot.
I think all these problems comes from slim, and since with OpenSUSE, that use kdm, I had no problem I want to try kdm as login manager, but I haven't seen any guide to do it if you've got a login manager already installed. I've seen it just if it is the first system installatio. And I'm a little scared of breaking my login and spend too much time fixing it.
How can I change from SLIM to KDM without pain?

WOW, I had to install kdebase-workspace and it installed as dependency a functional kde system . And... I was able to choose between all the other desktops but MATE, so... kdm and all that it installed with it's already uninstalled
But with kdm I was able to open an enlightenment session in tty 8 without closing kde in tty 7...
ewaller wrote:Install kdm.
Disable the slim service using systemctl
Enable the kdm service using systemctl
No need to uninstall slim. Hang on to it until everything is working
Thank you ewaller, it worked perfectly
Scimmia wrote:Well changing to kdm is as simple as using systemctl to disable slim and enable kdm.That won't get you graphical logins on tty8+, though.
So, how can I do it with slim?
Raynman wrote:Do you really need a GUI to kill a program?
No, I don't, it was just an example.
Sounds like your xinitrc isn't quite right, check the wiki page for slim.
I'm tired of reviewing my xinitrc in order to make slim let me choose my desktop. I think the F1 to change the session is experimental. I will open other thread in order to get some help or in order to help SLIM to solve this problem.
And you could try LightDM instead (because KDM probably pulls in some KDE crap). It comes with dm-tool (and a replacement for gdmflexiserver) to start a new session on another tty.
Sounds good. I'll try to make slim work perfectly and if I don't get it to work as perfectly I want I'll try other login managers.

How to change from lowercase to uppercase in Pages for iPad

First: hello!
Basically I got a new iPad and I'm using Pages for some document creation but i can't find how to change the text i selected from lowercase to uppercase, in MacOSX is in the Font Menu but I can't find it in Pages anyone knows how to do this?

Generally, you are more likely to get an answer if you post in the iWork for iOS forum at
https://discussions.apple.com/community/app_store/iwork_for_ios
 Cheers, Tom

How to change from Mac OS X to Mac OS X Server

Hello everyone? I have a Mac Pro Late 2013 with Mac OS X v10.9.4. I want to change from Mac OS X to Mac OS X Server v10.9.4. Is it possible?

If an enterprise mail server is a requirement, then I'd generally recommend installing Windows Server, with Active Directory and Exchange Server, Sharepoint server and related features. Not OS X Server.
OS X Server includes the Postfix and Dovecot packages and related tools, and which are common Unix servers used for mail.
If you want to run the integrated mail server within OS X Server, you'll need both private (assuming a NAT'd network) and public DNS services must be entirely correctly configured — other mail servers will use any of your DNS configuration errors as a reason not to accept mail from your server, and potentially as a reason not to send mail to your server — and you'll need static IP from your ISP, and a decent-grade firewall, and preferably a firewall with an embedded VPN server and with DMZ capabilities configured to keep any server breaches contained and separate from your inner network. Your firewall will usually need to have TCP port 25, TCP 587, and either TCP/UDP 995 or preferably TCP 993 open, and forwarded through; the appropriate ports for whatever services you're using.
You'll generally not want to have your internal, private, NAT'd network DNS servers accessible to and serving translation publicly.
Or yes, Kerio does quite well, and is definitely a step or two up from the standard mail software in OS X Server — though nowhere near what Exchange Server and Active Directory and the rest can provide for a typical enterprise.
As for many of the questions that can arise when configuring OS X Server via Server.app for DNS and mail, please see the help within Server.app.

Using Oracle 11g How to change the Log mode from NoArchieve to Archieve Log

Hi,
I currently using oracle 11g How can I change database from NoArchivelog node to Archivelog node using spfile.
And where exactly the spfile will be located?
My instance is EPM11 in my local oracle is present in D folder where can i found the pfile?
In this path i found 1 pfile in my Local Machine
"D:/Oracle/Product/11g/admin/epm11/pfile" .I have added the following commands in this pfile
# Archive Log Destinations -benr(10/15/04)
log_archive_dest_1='location=/u02/oradata/cuddle/archive'
log_archive_start=TRUE
Then i have ran the shutdown command.
Database instance is showtdown.
After that i am not able to perform startup.
So please suggest me how to change the mode using SPfile and tell me the path where spfile and pfile should be located?
And also do i need to set the "Oracle_Home" path in my environment variables"
Thanks In Advance,
Chandana

user11225122 wrote:
Hi,
I currently using oracle 11g How can I change database from NoArchivelog node to Archivelog node using spfile.
And where exactly the spfile will be located?
My instance is EPM11 in my local oracle is present in D folder where can i found the pfile?
In this path i found 1 pfile in my Local Machine
"D:/Oracle/Product/11g/admin/epm11/pfile" .I have added the following commands in this pfile
# Archive Log Destinations -benr(10/15/04)
log_archive_dest_1='location=/u02/oradata/cuddle/archive'
log_archive_start=TRUE
Then i have ran the shutdown command.
Database instance is showtdown.
After that i am not able to perform startup.
So please suggest me how to change the mode using SPfile and tell me the path where spfile and pfile should be located?
And also do i need to set the "Oracle_Home" path in my environment variables"
Thanks In Advance,
Chandanaremove log_archive_start=TRUE from pfile (it is depricated from 10g onwards)
SQL>startup nomount pfile="D:/Oracle/Product/11g/admin/epm11/pfile/initYOUR_SID_NAME.ora"
SQL>Create spfile from pfile="D:/Oracle/Product/11g/admin/epm11/pfile/initYOUR_SID_NAME.ora"
SQL>SHUT IMMEDIATE;
SQL>STARTUP MOUNT
SQL>ALTER DATABASE ARCHIVELOG;
SQL>ALTER DATABASE OPEN;
SQL>ARCHIVE LOG LIST;
SQL>SHOW PARAMATER SPFILE;
YOU WILL FIND THE LOCATION OF SPFILE
SQL>

X-Fi Elite Pro - how to change from Entertainment mode to Audio Creation m

Similar Messages

Maybe you are looking for