X11 not starting like it should
Hello all,
I have a situation where I run 2 admin accounts on a single machine ( for arguments sake Acct 1 and Acct 2) I do the majority of my work on the second one.
I have the latest X11 and the latest version of GIMP but for some reason it will only open on the 1st user account, I try to open it on the second and X11 just hangs, keeps jumping up and down doing little of any substance on the dock and GIMP wont start, but as mentioned previously it opens fine on the first user account. How do I work around this?
Interestingly, before anyone gets back to me I dont know if it is worth noting but I did not have X11 installed by default. I had to go back and drag it off my install DVD's and in the past I had an issue similar to this but when installing Vuze.
Any help would b appreciated
Hi All,
while assigning value to a RegEx in constructor itself, we can either specify pattern (for which we need not escape already escaped character)
like
var regexp:RegExp = new RegExp(/^\S.*\S$|^\S(?!.)/s)
or we can specify a string (for which we need to escape already escaped characters)
like
var regexp:RegExp = new RegExp("^\\S.*\\S$|^\S(?!.)","s")
Regards,
Abihshek Chaudhary
Similar Messages
-
my pass book on my iphone 5 does not work like it should, it works just the same as it did on the iphone 4, i tryed the date an time trick like 5 times an still nothing. i tryed factory reset an nothing. i know it workds different on the iphone 5 then the 4. but i dont know what else to do.
Can you be more specific about what isn't working? Are you running iOS 6 or iOS 6.1?
Did you read the support page on Passbook? http://support.apple.com/kb/HT5483 -
siri is not working like it should i asked it to play songs and it just says sorry i cant do it any ideas y
Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius -
If you put iOS 7 on an iPod 4th generation would it just ruin it, of would it just not run like it should?
Same answers as your other post!!!
-
I have a canon printer with a mac computer. For some reason whenever I print something the ink on the page is all green not black like it should be. I put in a new black ink cartrridge but that didn't change anything.Does anyone know why this is happening?
You posted in the OS 9 & below forum. What OS X version are you using? What model Canon printer? Canon printers have a test print capability (open the Printer Utility). What happens when you do a test print? Are all the printer cartridges in their proper location? Sometimes when you print "black", the printer uses a mixture of the colors to get "black". In the Printer Utility, check the levels of the other cartridges. There may be one color that is clogged.
Cheers, Tom -
X11 not starting after upgrade to Snow Leopard
Hello, sorry if this is trivial stuff for all of you, but I am really having trouble sorting this out; I'd be grateful if anyone can help. I recently upgraded to Snow Leopard (10.6.2), did the Combo update as suggested in www.apple.com, but I cannot get X11 to run since the upgrade (I did re-install X11 from the optional installations, btw). The symptoms are that when I try to run any X11 application (such as xmgrace, gnuplot or xfig), or even if I click directly on the X11 icon in the Utilities folder, the X11 icon keeps jumping in and out of the dock; I reproduce below what shows up in the console. Needless to say that I have read through it, but cannot make any sense of what is reported there. I can't believe I'm the only one having this problem, since all I have done is to upgrade from Leopard to Snow Leopard following the standard procedure. Should I perhaps do a clean install?
Thanks in advance.
12/02/2010 13:10:23 [0x0-0x6a06a].org.x.X11[3782] X11.app: main(): argc=2
12/02/2010 13:10:23 [0x0-0x6a06a].org.x.X11[3782] argv[0] = /Applications/Utilities/X1
1.app/Contents/MacOS/X11.bin
12/02/2010 13:10:23 [0x0-0x6a06a].org.x.X11[3782] argv[1] = -psn0434282
12/02/2010 13:10:23 [0x0-0x6a06a].org.x.X11[3782] Waiting for startup parameters via Mach IPC.
12/02/2010 13:10:23 org.x.startx[3791] /usr/X11/bin/startx: line 78: defaults: command not
found
12/02/2010 13:10:23 org.x.startx[3791] /usr/X11/bin/startx: line 82: defaults: command not
found
12/02/2010 13:10:23 org.x.startx[3791] /usr/X11/bin/startx: line 86: defaults: command not
found
12/02/2010 13:10:23 org.x.startx[3791] /usr/X11/bin/startx: line 90: defaults: command not
found
12/02/2010 13:10:23 org.x.startx[3791] /usr/X11/bin/startx: line 106: defaults: command not
found
12/02/2010 13:10:23 org.x.startx[3791] /usr/X11/bin/startx: line 112: defaults: command not
found
12/02/2010 13:10:23 org.x.privileged_startx[3800] font_cache: Scanning system font directories
to generate X11 font caches
12/02/2010 13:10:23 [0x0-0x6a06a].org.x.X11[3782] X11.app: Listening on socket for fd handoff:
(4) /var/tmp/tmp.0.suSuKO
12/02/2010 13:10:23 [0x0-0x6a06a].org.x.X11[3782] X11.app: Thread created for handoff. Return
ing success to tell caller to connect and push the fd.
12/02/2010 13:10:23 org.x.startx[3791] Xquartz: Handoff connection established (try 1 of 5) on fd 6, "/var/tmp/tmp.0.suSuKO". Sending message.
12/02/2010 13:10:23 org.x.startx[3791] Xquartz: Message sent. Closing handoff fd.
12/02/2010 13:10:23 [0x0-0x6a06a].org.x.X11[3782] X11.app: dostart_x11server(): argc=2
12/02/2010 13:10:23 [0x0-0x6a06a].org.x.X11[3782] argv[0] = /usr/X11/bin/X
12/02/2010 13:10:23 [0x0-0x6a06a].org.x.X11[3782] argv[1] =
12/02/2010 13:10:23 [0x0-0x6a06a].org.x.X11[3782] X11.app: Received new $DISPLAY fd: 10 ... sleeping to allow xinitrc to catchup.
12/02/2010 13:10:24 [0x0-0x6a06a].org.x.X11[3782] Xquartz starting:
12/02/2010 13:10:24 [0x0-0x6a06a].org.x.X11[3782] X.Org X Server 1.4.2-apple45
12/02/2010 13:10:24 [0x0-0x6a06a].org.x.X11[3782] Build Date: 20090705
12/02/2010 13:10:24 [0x0-0x6a06a].org.x.X11[3782] (EE) XKB: Couldn't open rules file /usr/X11/share/X11/xkb/rules/base
12/02/2010 13:10:24 [0x0-0x6a06a].org.x.X11[3782] (EE) XKB: Couldn't open rules file /usr/X11/share/X11/xkb/rules/base
12/02/2010 13:10:24 org.x.privileged_startx[3800] font_cache: Updating FC cache
12/02/2010 13:10:25 org.x.startx[3791] /usr/X11/bin/xinit: No such file or directory (errno 2): no program named "/usr/X11/lib/X11/xinit/xinitrc" in PATH
12/02/2010 13:10:25 org.x.startx[3791] Specify a program on the command line or make sure that /usr/X11/bin
12/02/2010 13:10:25 org.x.startx[3791] is in your path.
12/02/2010 13:10:25 org.x.startx[3791] waiting for X server to shut down
12/02/2010 13:10:25 [0x0-0x6a06a].org.x.X11[3782] Quitting Xquartz...
12/02/2010 13:10:26 org.x.privileged_startx[3800] font_cache: Done12/02/2010 13:10:26 com.apple.launchd.peruser.501[93] (org.x.startx) Throttling respawn: W
ill start in 7 seconds12/02/2010 13:10:33 org.x.startx[3906] /usr/X11/bin/startx: line 78: defaults: command not
found12/02/2010 13:10:33 org.x.startx[3906] /usr/X11/bin/startx: line 82: defaults: command not
found12/02/2010 13:10:33 org.x.startx[3906] /usr/X11/bin/startx: line 86: defaults: command not
found12/02/2010 13:10:33 org.x.startx[3906] /usr/X11/bin/startx: line 90: defaults: command not
found12/02/2010 13:10:33 org.x.startx[3906] /usr/X11/bin/startx: line 106: defaults: command not
found12/02/2010 13:10:33 org.x.startx[3906] /usr/X11/bin/startx: line 112: defaults: command not
found12/02/2010 13:10:33 org.x.privileged_startx[3800] font_cache: Scanning system font directories
to generate X11 font caches12/02/2010 13:10:33 org.x.startx[3906] Xquartz: X11.app = /Applications/Utilities/X11.app/C
ontents/MacOS/X11
12/02/2010 13:10:33 org.x.startx[3906] Xquartz: Starting X server: /Applications/Utilities/
etc etcA zero size is not unusual, especially if you cannot set any preferences because you cannot get
x11 to start.
Your user account may very well be hosed.
Here is some info on how to replace it:
http://discussions.info.apple.com/thread.jspa?messageID=10730965
http://discussions.apple.com/message.jspa?messageID=6185507
I believe the easiest way to accomplish this is to first repair your user account permissions
using the SL install DVD. This won't fix the account, but it will make sure the user data in the
account has the correct permissions before backing it up for transfer later.
Mac OS X v10.5 or later: While started from the Leopard Install DVD, a user's home directory permissions can be reset using the "Reset Password" utility.
I suggest using Carbon Copy Cloner or equivalent to backup and restore your account data.
Kj -
X11 does not start (icon just bounces in the dock when directly clicked and then disappears). It sems that I have an old X11 version (1.0 according to the info panel).
Error messages found in Konsole:
28.09.13 21:23:59
[0x0-0x30030].org.x.X11[410]
launch_msg("CheckIn") IPC failure: Operation not permitted
28.09.13 21:23:59
[0x0-0x30030].org.x.X11[410]
Xquartz: Unable to locate waiting server: org.x.X11
28.09.13 21:23:59
[0x0-0x30030].org.x.X11[410]
Xquartz: X11.app = /Applications/Utilities/X11.app/Contents/MacOS/X11
28.09.13 21:23:59
[0x0-0x30030].org.x.X11[410]
Xquartz: Starting X server: /Applications/Utilities/X11.app/Contents/MacOS/X11 --listenonly
28.09.13 21:24:19
[0x0-0x30030].org.x.X11[410]
Xquartz: bootstrap_look_up(): Unknown service name
28.09.13 21:24:21
com.apple.launchd.peruser.503[325]
([0x0-0x30030].org.x.X11[410]) Exited with exit code: 1
On another MBP with OS 10.6.8, X11 with version 2.3.6 according to the info panel runs without problems.
Is it possible that installing XCode from the install disk after the 10.6.8 update did overwrite the updated X11?
How can I update now X11? Could one run again the 10.6.8 combo update? Any help is appreciated!
ThomasThank you for your response! Here is the output of the commands you suggested:
[nes017-mbp] ~ > which startx
/usr/X11/bin/startx
[nes017-mbp] ~ > ls /Applications/Utilities/X*.app
Contents
[nes017-mbp] ~ > ls /Library/LaunchDaemons/*startx*.plist
ls: /Library/LaunchDaemons/*startx*.plist: No such file or directory
I am not really familiar with X11 stuff, so I don't know whether this output is as it should be.
Meanwhile, I checked the X11 version not just with the info panel, but also with the system profiler (>Software>Applications). Here are the listings of the X11 version on my MBP:
- Info panel: Version 1.0 from 25.04.2011 15:38
- System Profiler:
X11:
Version: 2.3.6
Zuletzt geändert: 25.04.11 15:38
Art: PowerPC
64-Bit (Intel): Nein
Informationen: org.x.X11
Ort: /Applications/Utilities/X11.app
Astonishingly, in System Profiler another version number is indicated than in the Info panel.
For the other MBP with 10.6.8, where X11 is running (and XCode has not been installed), the following is listed (incl About X11 when running X11):
- Info panel: Version 2.3.6 from 21.06.2011 11:13
- System Profiler:
X11:
Version: 2.3.6
Zuletzt geändert: 21.06.11 11:13
64-Bit (Intel): Nein
Informationen: org.x.X11
Ort: /Applications/Utilities/X11.app
- About X11: XQuartz 2.3.6 (xorg-server 1.4.2-apple56)
The output on this MBP for the commands you suggested in your reply is identical to the output given above for the MBP where X11 is not running.
I came also across this apple support page,
http://support.apple.com/kb/TS1963
where it's stated that migration of programs, e.g., X11, from a PowerPC-based Mac could cause problems on Intel machines. So I deleted my X11 app (which obviously is a PowerPC version) as suggested there and re-installed X11 from the Install Disc. However, the re-installed version was exactly the same as I had before, i.e. the one dated from 25.04.2011, and did again not start.
Based on the info on this support page, I finally just copied the X11 app from the other MBP (dated from 21.06.11) to my MBP - and now this X11 opens without problem, when double-clicked directly or also when a window is required from IDL, for instance.
I am not sure, though, whether this direct copying of the X11 app is a good solution, or whether later some problems may pop up, because no 'full' installation of this version has been made.
Do you have any comments on this?
Thank you for your help
Thomas -
RegExp not working like it should
Maybe I just need another pair of eyes looking at this, but I have a RegExp instance that should work according to multiple tools on the web but it's not matching when it should in my application. The expression should match if there isn't any leading or trailing spaces. Here's a code snippet:
var regexp:RegExp = new RegExp("^\S.*\S$|^\S(?!.)", "s");
if(regexp.exec("Hello World") == null)
trace("NO MATCH");
Using tools such as Grant Skinners RegExr (http://gskinner.com/RegExr/) it appears that the previous code should get a match. Does anyone see an issue or know why it isn't working?Hi All,
while assigning value to a RegEx in constructor itself, we can either specify pattern (for which we need not escape already escaped character)
like
var regexp:RegExp = new RegExp(/^\S.*\S$|^\S(?!.)/s)
or we can specify a string (for which we need to escape already escaped characters)
like
var regexp:RegExp = new RegExp("^\\S.*\\S$|^\S(?!.)","s")
Regards,
Abihshek Chaudhary -
ITunes Wi-fi sync not working like it should.
So I got a new ipod touch 4th generation because my other one broke. I'm trying to set up wifi sync so I don't have to connect the device to the computer incase it malfunctions. Half the time it doesn't work, and if it does work, I still have to connect it directly to the computer. Sometimes I use wifi sync the first time and it doesn't work, then I plug it into my computer and it detects it. Then I unplug it and use wifi sync and it works like it should. So it kind of defeats the purpose of using wifi sync if everytime I want to sync content through wifi, I'm forced to connect the ipod to the computer. Is there something I'm doing wrong? Please Help!
Also, my Ipod is not even a month old and is working like new. It is refurbished.Have you looked here:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing -
Hi all! After putting arch on my netbook and my desktop, I've now decided to put it on my media centre pc too!
When I try to start X i get no display (no signal). The console shows me the following issues. I'm not sure if these are what are preventing me from starting x, or if its a seperate issue.
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux Advent7036 2.6.33-ARCH #1 SMP PREEMPT Mon Apr 26 20:00:20 CEST 2010 i686
Kernel command line: root=/dev/disk/by-uuid/8032bb8b-dcfd-4b33-982a-5352cfa5e68c ro
Build Date: 01 April 2010 05:35:33PM
Current version of pixman: 0.18.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 1 13:37:50 2010
(==) Using config file: "/etc/X11/xorg.conf"
gnome-session[2729]: WARNING: GsmSessionSave: Failed to create directory /root/.config/gnome-session/saved-session: Permission denied
gnome-session[2729]: WARNING: GsmSessionSave: could not create directory for saved session: /root/.config/gnome-session/saved-session
gnome-session[2729]: CRITICAL: gsm_manager_add_autostart_apps_from_dir: assertion `path != NULL' failed
GNOME_KEYRING_CONTROL=/tmp/keyring-gwVBfl
GNOME_KEYRING_PID=2742
GNOME_KEYRING_CONTROL=/tmp/keyring-gwVBfl
GNOME_KEYRING_CONTROL=/tmp/keyring-gwVBfl
SSH_AUTH_SOCK=/tmp/keyring-gwVBfl/ssh
Window manager warning: Failed to read saved session file /root/.config/metacity/sessions/1061bcfdf1a31f5765127271747111329000000027290013.ms: Failed to open file '/root/.config/metacity/sessions/1061bcfdf1a31f5765127271747111329000000027290013.ms': Permission denied
(polkit-gnome-authentication-agent-1:2765): GLib-GObject-WARNING **: cannot register existing type `_PolkitError'
(polkit-gnome-authentication-agent-1:2765): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed
(gdu-notification-daemon:2766): GduNotification-WARNING **: Error creating directory `/root/.config/gnome-disk-utility/ata-smart-ignore': Permission denied
Unable to open desktop file evolution.desktop for panel launcher
Below is the Xorg.log
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux Advent7036 2.6.33-ARCH #1 SMP PREEMPT Mon Apr 26 20:00:20 CEST 2010 i686
Kernel command line: root=/dev/disk/by-uuid/8032bb8b-dcfd-4b33-982a-5352cfa5e68c ro
Build Date: 01 April 2010 05:35:33PM
Current version of pixman: 0.18.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 1 13:37:50 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 8
(--) PCI:*(0:1:0:0) 10de:032c:17c0:2068 nVidia Corporation NV34GLM [GeForce FX Go 5300] rev 161, Mem @ 0xd1000000/16777216, 0xe0000000/134217728, BIOS @ 0x??
??????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.25 Wed Jan 27 02:59:37 PST 2010
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 173.14.25 Wed Jan 27 02:34:38 PST 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
(II) NVIDIA(0): NVIDIA GPU GeForce FX Go53xx (NV34GL) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 65536 kBytes
(--) NVIDIA(0): VideoBIOS: 04.34.20.51.12
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce FX Go53xx at
(--) NVIDIA(0): PCI:1:0:0:
(--) NVIDIA(0): CRT-0
(--) NVIDIA(0): Nvidia Default Flat Panel (DFP-0)
(--) NVIDIA(0): CRT-0: 350.0 MHz maximum pixel clock
(--) NVIDIA(0): Nvidia Default Flat Panel (DFP-0): 270.0 MHz maximum pixel
(--) NVIDIA(0): clock
(--) NVIDIA(0): Nvidia Default Flat Panel (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0): will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): DPI set to (81, 81); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(**) SynPS/2 Synaptics TouchPad: always reports core events
(**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event8"
(II) SynPS/2 Synaptics TouchPad: Found 10 mouse buttons
(II) SynPS/2 Synaptics TouchPad: Found absolute axes
(II) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
(II) SynPS/2 Synaptics TouchPad: Found absolute touchpad.
(II) SynPS/2 Synaptics TouchPad: Configuring as touchpad
(**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
(**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(II) SynPS/2 Synaptics TouchPad: initialized for absolute axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event3"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event6"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) SynPS/2 Synaptics TouchPad: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Sleep Button: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
And here is my Xorg.conf as generated by nvidia-xconfig
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Wed Jan 27 03:02:48 PST 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Hopefully someone can shed some light onto this? many thanks!
Last edited by ecion (2010-05-01 13:00:22)Hi guys. I tried MadCat's advise of the vesa driver, and it works! I can now run gnome and everything.. kb and mouse work too. However I would really like to run the nvidia driver. Not sure why it's not working. =[
Hal is indeed running (which i understand invokes dbus if it cant find it?) If i try to start dbus manually, and then hal, i cannot start hal - it fails. Starting only Hal works fine. -
Brand new ipod touch not working like it should??
I have a brand new ipod touch that i got last tuesday.and every downloaded app will stop working after i have had it for about a day..like it starts to load the app then just goes back to homescreen..all pre-installed apps work fine.
but i have tryed restoring my ipod and it doesnt really fix it because all the apps stop working just like before..and i have also tryed deleting and re-installing the apps but is still doing the same thing.
Is there a way to fix this or should i get it replaced??
(i have a 2 year warrenty)Maybe your using too much Virtual Memory. Try holding the sleep/wake button and the home button until you see the silver apple.
-
GotoAndStop not working like it should (AS3 / CS4)
Hi everyone, I've recently started using AS3 in flash and it's giving me some troubles. Here's the situation:
On my first frame on the main timeline I use a gotoAndStop("home") command to go to my homepage which is on frame 45 and labeled "home".
From frame 2 up to frame 44 there are multiple movieclips with animations and sound in them, which stop at frame 45.
When I use the gotoAndStop() command in my first frame it seems to work but the sounds of my movieclips in the previous frames keep looping.
I don't understand why this is happening, since my movieclips aren't even on frame 45.
Anyway, here's some of my code.
first frame on main timeline code:
[CODE]
import flash.events.MouseEvent;
this.gotoAndStop("home");
[/CODE]
below that code are my buttons.
here's the code from one of the buttons I use.
[CODE]
function mouse_over(e:MouseEvent){
e.currentTarget.gotoAndStop("_over");
function mouse_out(e:MouseEvent) {
e.currentTarget.gotoAndStop("_up");
function mouse_down_center(event:MouseEvent) {
btn_center.gotoAndStop("_down");
gotoAndStop("home");
btn_center.buttonMode = true;
btn_center.addEventListener(MouseEvent.MOUSE_DOWN, mouse_down_center);
btn_center.addEventListener(MouseEvent.ROLL_OVER,mouse_over);
btn_center.addEventListener(MouseEvent.ROLL_OUT,mouse_out);
[/CODE]
I've also tried putting "this." in the button code and making a variable out of "this" to then use that variable in the code. It didn't change anything.
Any help with this would be greatly appreciated.Sorry for the somewhat late response, didn't expect people to respond this quickly.
There are no sounds when I use stop() instead of gotoAndStop() so I guess that means my sounds are coming from the movieclips? Not sure if this helps.
I looked into using the soundmixer.stopall() but the problem is that I also have a background music playing (which works perfectly by the way) so that code would stop my music as well.
I guess I should look into loading my sounds via actionscript, do I do that from within my movieclips or from the main timeline frame?
The problem is that I don't want my sounds to start right at the beginning of the movieclip animation. -
IMessage not working like it should!
I have a problem that I'm sure other people have as well.
The problem in a few words is that iMessage is not capable of fast switching between Wi-Fi and cellular network.
Example 1:
When I am texting with my girlfriend and I'm inside my house, but a bit too far from my router (but still connected to it, yet with a weak signal), the iPhone often fails to send the message (red dot error) or with a certain amount of delay (usually a minute or two).
Example 2:
When I am outside, on a location where I don't have a 3G connection and obviously no Wi-Fi either, I have the same issue as described in the example above. It also occurs when having a 3G connection, but this issue is much less occuring.
In my opinion, Apple should seriously rethink the way iMessage works, cause it is quite annoying when you think that a message has been sent. When you check your iPhone 20 min/ 1 hour/ 2 hours... later, and you find out the message hasn't got out, you feel like smashing the phone against a wall. Especially when the message is urgent.
I never have this problem with What's App, that's why I prefer to continue using this. Maybe Apple should buy them, so they have at least proper working software.
Is there a way to fix this? The level of 'this annoys the crap out of me' on a scale from 1 to 10 is 11 right now.I notice the same issues with my iPhone and iPad. I hope there will be a fix for it soon. The same type of problem occurs when I am using Safari and am farther away from my router at home; my device continues to try using the wi-fi instead of switching to 3G to optimize the download speed.
Another problem with iMessage: my sister has an iPhone without a data plan and has to turn off iMessage to send texts when she is outside of a wi-fi zone, otherwise it keeps try to send as an "iMessage" instead of a "Text Message" and displays the red dot error that it cannot send. And when I try sending her an iMessage (my iPhone knows she has iOS 5 with iMessage) it shows as delivered, even though she has her iMessage turned off and does not receive it until she turns it back on.
One more thing: The whole iMessage to email address and/or phone number is very lame...please make all iMessages (sent and received to either location) sync between registered devices. It just makes more sense than having 2 conversations open with the same person becasue you iMessage from your iPhone using your phone number then switched to your iPad using your email address..
There are a lot of things to fix/improve with iMessage to make it as good as WhatsApp or BBM...
Get to work, Apple! -
My ipad mini has not been functioning properly as of late and it is making me worry. What could be causing this problem? Are such changes covered by the one year warranty?
If there is a hardware problem that is causing the lack of touch screen sensitivity, it would be covered by the warranty as long as the problem was not caused by accidental damage - like dropping the iPad, getting it wet, letting it get too cold, too hot ...something like that.
See if this helps. Close all of the apps in the recents tray and then reboot your iPad.
Tap the home button first. Then double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
My Macbook will not start like it normally does, it says update required. What is wrong?
My macbook says "update required" everytime i turn it on. It just shows me a grey screen and then I have to log in with my password. I cannot see my account picture either. What to do? I have recently reset my Macbook.
Back up all data.
If you have more than one user account, you must be logged in as an administrator to carry out these instructions. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
sudo fdesetup sync
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. You'll be prompted for your login password. Nothing will be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning not to screw up. Confirm. You don't need to post the warning.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
Wait for a new line ending in a dollar sign (“$”) to appear. You can then quit Terminal. Test.
Maybe you are looking for
-
Add page on logon page from third party system and from KM
Hi All, I have one requirement where i need to embade other html file in logon page of Portal. Where the pages will come from othere server as well as from KM. VS
-
Safari 5 crashes on non-admin account
All: I looked and could not find my specific problem. I am running the latest OS X (non-server) and removed the third party Safari plug-ins. I have moved the cache folder to the recycle bin and restarted Safari, but the crashes continue. My admin acc
-
Organization field Greyed out in oppurtunities
Hi, In the Oppurtunity tiles set the Sales ORG field is Greyed out. In the OPPOVIEW6 tile set I tried to change the Mode of the Sales ORg to Normal and geenrated the tile. BUt even then in the MSA it is Greyed out. what do i need to do so that i can
-
Pixeled when in catalogue view
Hi, sometimes pictures turn up "pixeled" and unsharp when browsing in calalogue view. Most of the time one can see while iPhoto is sharpening the picture up while reading it in to th memory, but from time to time it stays unsharp. If I then open up t
-
Photoshop hangs temporarily using brush tool on large files
When using the brush tool on layer masks on very large files (2-6G), photoshop will stop responding for a minute or two, seemingly randomly. The app has not crashed, but I cannot paint, change brush size, or interact with palettes. I've noticed that