X12 00502-204 validate instance failure when EDI file is in readable format in Visual Studio

Hi, I have a n X12 00502- 940 edifile, when all data are on the same line, Visual studio validates
ST*204*7629~B2**XXXX**159771**PP~.......N4G*L*43920*900**E*864~SE*33*7629~
when I try to make the file in a readable format, each segment on line by hiting enter after each "~", and try to validate
as follows
ST*204*7629~
B2**XXXX**159771**PP~
B2A*00*LT~
SE*33*7629~
I get "Invalid Segment Terminator" or many segment level errors, I have always "~" in the "segment separator (106th char of iSA) checked in the validate instance dialog box. In Segment separator suffixe, I tried all, None, CR,
LR & CRLF but no way
I also generated an instance and made it readble, I get the exact same behavior
Thanks in advance

Covert it to readable format only for your purpose. Leave the system to read it based on segment separator only.

Similar Messages

Get error when passing server name to Crystal Reports in Visual Studio 2012

Hello,
I work on Visual Studio 2012 with Crystal Report 13.0.12 (both developer and run-time). When I pass the name of the server to the Crystal Reports, I get an error -- Failed to open the connection. Database Vendor Code 17. I use SQL OLEDB as the provider. It worked before. Not sure what has happened.
Any help is much appreciated!!!
John

Hi,
See this: Failed to open the connection - database vendor code 17
--dj

When should we must create site pages through visual studio?

Generally site pages are created through SP designer. But what are business requirement when we MUST create site pages through visual studio rather than designer? I
mean situation should demand we MUST create site pages through visual studio rather than designer. Need some example .

Hi Sunil,
when it contains code behind
http://blogs.msdn.com/b/kaevans/archive/2010/06/28/creating-a-sharepoint-site-page-with-code-behind-using-visual-studio-2010.aspx
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

Prevent Instance Shutdown When Control File Can't Be Written To

Our instance keeps shutting down when the system's backup utility backs up the control file (and once an index file) and locks the file. This also occurs when virus scanning. I was wondering if there was a parameter to set to have DB Writer try more than once to write to a file before aborting (and shutting down our instance).
Any help would be appreciated.
Thanks in advance.

Referring to the iPod Classic manual at:
http://manuals.info.apple.com/MANUALS/1000/MA1195/en_US/iPod_classic_160GB_User_ Guide.pdf
Several questions come to mind (p. 18):
Have you synced this iPod previously? If not, did you get the Setup Assistant to appear?
Are you trying to add content automatically or manually?

Is it possible to select multiple files on the W8.1U1's SEARCH RESULTS window page? For instance, if 10 CPP files are found by the seraching mechanism, can I select all 10 files and have them open in Visual Studio at once?

TIA.

Brandon, this forum member is known since a long time ago an arrogant (he thinks he knows more than every other) and stupid(*) (full of misconceptions). His first post is a very good example of what I just wrote. How does he dare to suggest to use File
Explorer, if W8.1 already has a system built for doing just this search? Do I have to open File Explorer in the folder (or somewhere near) the item I'm looking for? What about the other items in folders above it? This suggestion is stupid(*). He even
asserts that I'm using Modern UI! I'm not! I'm using the desktop, but his misconceptions make him write such idiocies(*) with such arrogance: asserting what he doesn't know (arrogancy and stupidity). And more, this guy is no one to say he/he/he to me, because
I know he is what you deleted from my posts, and more, he is often crying, moaning and snivelling like a spoiled child in this forum and messing up any thread posting stupid(*) images of programs imagined/designed/developed by others. All posts from him in
this thread must be trashed (you should do it). He has nothing to contribute POSITIVELY in this thread, but just to MESS IT UP.
(*) stupid, I can write, after all, you didn't delete this word from this ... poster.
Now, look at the first reply: this forum member has no idea how much stupid is his 'work around'. And this 'work around' does not answer my question and even does address the environment I mentioned: W8.1 U1 search results window page, and not File Explorer!
His second post just reassures me he has no idea what is the searching mechanism I'm talking about. He even mentions Win-w(!) which proves he totally ignore what is the searching mechanism I'm talking about. A user like this one, must have many monitors to
keep him busy looking at them, and having excuses for not read and learn technical documentation. It's ignorance about technical aspects of computer issues that makes him post bad bug report and a bad idea in Connect site:
Using Get-Date -Format "CyM" to work around some bugs
https://connect.microsoft.com/PowerShell/feedback/details/884502/using-get-date-format-cym-to-work-around-some-bugs
Only total ignorance about PowerShell makes someone post such bad 'bug' report. He got critics about his bad post, but I'm sure he doesn't understand.
Column headers for alias should include DisplayName instead of just Name
https://connect.microsoft.com/PowerShell/feedback/details/908152/column-headers-for-alias-should-include-displayname-instead-of-just-name
In fact, the information displayed is already DisplayName, but this guy has no technical knowledge to understand what is happening.
These 2 forum members just messed up a thread that should be free of negative contributions, besides off topic.

No file-type extensions appear when exporting files to a different format

Hello.
I have been having this issue for a while on both Pages and Numbers.
Whenever I export a file to another format (e.g., pdf, txt, doc, or xls) the file appears WITHOUT any extension at all. I have to go to the file, click on the file name and type in the proper extension at the end of the filename.
Frankly, I'm tired of doing this.
Does anyone know of some way to fix this?
Thanks for your help.

Try to run Pages from an other user account.
If it behaves flawlessly, we will know that the culprit is in your original user account.
In such case, most of the time, the wrongdoer is the preferences file :
<startupVolume>:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Pages.pl ist
Quit Pages,
move the file on the Desktop
restart Pages.
If it behaves well, you will know the culprit. Move it to the trash and work … until the next corruption.
Yvan KOENIG (VALLAURIS, France) mercredi 17 novembre 2010 16:47:56

Instance failure, in System.Data in sql 2012

On Win Server 2012 Standard I have a C# app that runs fine with sql 2008 express. When I installed sql 2012 express I get "instance Failure" source: System.data. when the following LYNQ query executes:
//MessageBox.Show("Starting GetInitialPortStatus.");
db =new
DataClasses1DataContext();   //establish
dataconnection to CALMasterSQL
// 2. Query creation.
var PortsQuery =from
portrecord in db.Channels
select portrecord;
// 3. Query execution.
int count = 0;
// MessageBox.Show("Starting >portrecord in PortsQuery<.");
foreach (var
portrecord in PortsQuery)
// add rows to the grid for each record in the database Ports table
Otherwise the app works fine. The closet fix in the forum I could find was to run
exec sp_configure 'user instances enabled',
1.
Go
Reconfigure
Which I did but no change.
How can this be corrected. It seems like it is a known issue but no fix for sql 2012?
Thanks
Morris
Thank you Morris

Thanks for your reply.
The connection string is:
<add name="CMMainWindow.Properties.Settings.CALLMASTERConnectionString"
            connectionString="Data Source=HLA2012\\SQL2012EXP;Initial Catalog=CALLMasterSQL;Integrated Security=True;Connect Timeout=5"
            providerName="System.Data.SqlClient" />
The SQl instance is call "SQL2012EXP". There is also SQL 2008 Express on the same machine called SQLExpress.
Both engines work fine in every other way.
Thanks
Morris
Thank you Morris
Hi MoCoder,
According to your description, if it contains a double-slash between the server name and the database instance name in your connection string, it should be localhost\SQLEXPRESS. There is a similar issue about instance failure when connecting to SQL Server
Express in C# application. You can review the following article.
http://www.hanselman.com/blog/FixingInstanceFailureWhenConnectingToSQLServer2005Express.aspx
In addition, Make sure your SQL Server instance(MSSQLSERVER) is running via the services management console.
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Group Tree issue when refreshing- Crystal for Visual Studio 2010 WPF Viewer

Hello,
We've run into an issue when refreshing reports with the WPF viewer for Visual Studio 2010. After the report is refreshed, the Group Tree is blank and it should have values. For example, you run a report and see values in the Group Tree. If you refresh the report with the same parameter values the Group Tree is blank.
Has anyone run into this yet?
Thanks,
Tyler

That is correct.
I just did a quick test and was not able to reproduce the issue.
Details of test:
1) Create a new app;
File | New | Project
Visual Basic | reporting -> Crystal Reports WPF Application
2) Add the "Open File" button to the viewer (ShowOpenFileButton off of the WPF viewer properties)
3) Run app
4) Browse to a report that has a number of groups >250
5) Refresh report using the Refresh button on the viewer
I'll work on this a bit later today, see if I can repro it another way. Meanwhile, can you provide mode details (code) on how you repro the issue?
- Ludek

User is getting email delivery failure when processing via SAP as it tries to send an email to a user who have left the company

Hi Experts,
I need to remove a name on a group list in Outlook as the user is getting email delivery failure when processing via SAP (He sends the invoice for approval and emails get sent to different users for approval.) One of those users has left the company and so the user gets a email delivery failure error.
How do I remove this user who is no longer with the company?
The user is saying: When I approve an invoice in SAP it sends an email notification through outlook. One of those users is no longer with the company so it cannot deliver the notification, and in return send a delivery failure (in outlook). I am approving the invoices from my SAP Workplace inbox.
How do we know what group the email is going to?
Please let me know if you have seen this issue before. Greatly appreciate your help.
Thanks,
Asad

Hi,
Please check whether you are using a custom z program for sending emails of approved invoices to users. If yes then either the user email ids are hardcoded in the program else a ztable is maintained for them.

How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747

Delivery failures when sending to mail contacts in O365

We are in the middle of a migration from Domino to Exchange (O365) and have updated the GAL with entries from our local active directory. These entries include email addresses using only a few of the domains that are hosted by our Domino
environment - but not all.
People who have been migrated to Exchange receive delivery failures when replying to an email from someone who is still in Domino.
Example:
User Bob who has been migrated to O365 gets an email from User Ann who is still in Domino. When User Bob does a reply, User Ann's address populates with
User_Ann AT MAINDOMINODOMAIN dot com (Please note - the @ signe was substitued with AT and the .com was substitued with dot com) because I got an error when trying to submit this. Error - Body text cannot contain images or links until we are bable
to verify your account.)
User Ann is defined in the O365 GAL as a mail contact with these email addresses:
User_Ann AT dominodomain1 dot com
User_Ann AT dominodomain2 dot com
User_Ann AT dominodomain3 dot com
User Bob gets a delivery failure.
Why?

Hi,
In order to resolve the problem more efficiently, I recommend you ask your question in the Exchange Online (Office 365) Forum. You might get a better answer in the Office 365 forum.
http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Thanks for your kindest understanding.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

I get a general failure when I click on links in my email. This happens more frequently now that I've downloaded the latest version of Firefox. Very annoying. Help!!!

I get a general failure when I click on links in my email. "General Failure" is followed by a link and I have to click ok to get rid of it. This happens every time I click on a link in my email. I've turned my computer on and off several times, but it persists. It's very annoying and I'm considering returning to Internet Explorer because of it.

This is a known bug, and has been for years. It occurs when Firefox is your default browser and some glitch (or program) changes that default. Thankfully, there's a fairly easy fix, though it does involve monkeying around in the Registry.
(Note: These instructions apply to Windows Vista and 7 only.)
1. Click Start, type regedit, and then press Enter.
2. Navigate to the following entry: HKEY_CLASSES_ROOT\FirefoxURL\shell\open\ddeexec
3. In the center pane, double-click the Default entry, then remove whatever value is there (it'll probably be a weird string of numbers and commas).
4. Click OK, then exit Regedit.
5. If Outlook and/or Firefox are open, close them, then restart them.
this information was found at[[ http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html]]
I am using windows 7 pro this issue has drove me crazy for some time, now finally it's fixed by doing the exact same steps as above, hope this works for everybody that is having this problem. I just had to share this with my fellow firefox users. :)

How to validate the field when i am populating the data cursor to block

Hi,
I am populating data cursor to multi record block.
Block contain 5 items. I am populating data cursor to block for 4 items. User will enter one item value that is quantity field.
If user enter negative values and decimal points in quantity filed i need to display message to user item level.
Please do the needful how to do it.

902434 wrote:
Hi,
I am populating data cursor to multi record block.
Block contain 5 items. I am populating data cursor to block for 4 items. User will enter one item value that is quantity field.
If user enter negative values and decimal points in quantity filed i need to display message to user item level.
Please do the needful how to do it.If you want to validate at entry level then use When-Validate-Item trigger and check the input and show message. Like
If :quentity <0 then
message('do not enter negative value');
message('do not enter negative value');
raise form_trigger_failure;
end if;Why u open same thread again ? not closing one.. check this one
</a>
How to validate the field when i am populating the data cursor to block
Hopes this helps
If someone's response is helpful or correct, please mark it accordingly.

SSIS - Failure when calling stored procedure using sp_executesql

Hi
Newbie here so if it doesn't make sense I apologise.
I have an SSIS (Visual Studio 2012) package that basically gets data from tables and inserts them into staging tables.
There are 2 containers each having 20 Execute SQL Tasks running in parallel inside and the 2nd one is failing when I try to call a stored procedure that is using sp_executesql.
All the connections are fine as I can change the call of sp_executesql to an insert statement and it works ok.
Property Settings for the container have TransactionOption = Required. Inside the Execute SQL's have Supported.
Settings for the Execute SQL Tasks have the isStoredprocedure = TRUE and the procedure name is correct.
I have tried to change the procedure name to pass in parameters etc but it seems that every time the calls hit the sp_executesql it falls over if more than 3 are called at the same time.
Anybody got any ideas?
Thanks in advance

Thanks for the quick reply the error is
failed with the following error: "The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly,
or connection not established correctly.
The parameters getting passed are correct as I'm using them in the Insert statement that I substituted for the sp_executesql. It looks like as soon as there is a lot of connections then it falls over. It works fine with 1 or 2 execute sql tasks but not any
more than that.

Any existing function to validate an item when other item has been changed?

Any existing function to validate an item when another item has been changed? Because these 2 fields are related. When one filed is changed, the other one should be blank and let the user to input again. I am using oracle custom.pll library.
Any ideas?
Amy

Hi Vikram,
Thanks for posting your issue,
You can switch of alerts and set E-Mail Notification to Yes under your Workflow Tasks list > Settings > Advanced Settings. By doing so user specified in AssignedTo will receive e-mail notification when task is created and if task ownership is not changed
during your workflow this will be the only mail sent by system.
Since you are already using SharePoint designer you also have option to include Send an Email action in your workflow (after task is created). This option is better if you want to send some specific info to user.
Also, browse the below mentioned URLs to create workflow step by step
http://sharepointsolutions.com/sharepoint-help/blog/2010/03/create-a-detailed-custom-task-notification-with-a-sharepoint-designer-workflow/
http://sharepoint-community.net/forum/topics/configure-email-notification-for-discussion-board-activity
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

X12 00502-204 validate instance failure when EDI file is in readable format in Visual Studio

Similar Messages

Maybe you are looking for