X201 Keyboard not taking inputs

Running Windows 7 x64 Enterprise on a X201 Core i7 620M laptop with 8 GB of RAM.  All installed by Lenovo.
I haven't been able to pinpoint the cause, but at random intervals the keyboard will stop taking inputs through Windows operating system.  Pressing the Fn key and the appropriate Function key will activate said function, however the keyboard itself for anything else will not take input.
I have had no issues when an external keyboard is plugged in, but when using the Lenovo ThinkPad keyboard itself, it happens every so often without warning or trace in the error logs.  I've experienced this across other W510 and T410 models as well.
All patches from TVSU were installed prior to Windows Update.
Any thoughts on where to point to?  It's happened three times this evening while not plugged in to a power outlet, however for the past week performance has been solid with no issues.
Wondering if anyone else has this issue? Am I missing a driver?

Oddly if I plug in a USB keyboard, I'm able to type using the USB keyboard, but the keyboard within the laptop is effectively dead (though it will take Fn key combinations and work in a sub operating / BIOS level for things like PGP disk / TrueCrypt).
There are no errors spawned throughout the error logs - I looked through about everything.
I've gone in and changed the USB Selective Suspend setting in power settings to be disabled to see if this perhaps is the issue.
This is happening across Windows 7 x64 Enterprise.  No real rhyme or reason to what is triggering it, but it's across all ThinkPad platforms - really starting to get frustrated as it's improbable that it's hardware.

Similar Messages

  • Muse Contact Form Not Taking Inputs

    Hi there,
    Could anyone shed some light as to why my contact forms (http://www.excelenvironmental.co.uk) are not taking inputs on the name, email and phone no fields? I am using the built in business catalyst forms - ecommerce package. Any help would be gratedully received.
    Thanks

    Hi
    I have tried to test the form placed in contact page and it works fine.
    User information is submitted and thank you message is displayed on submission.
    Please clear browser cookie and try again or check with a different browser.
    If you are still facing the same issue, provide details such as browser and version details.
    Thanks,
    Sanjit

  • Korean input keyboard not correct typing after ios7 upgrade at iPhone and iPad.

    korean input keyboard not correct typing at page after ios7 upgrade at my iPhone and iPad.

    Report this to Apple via
    http://www.apple.com/feedback

  • I'm using the note taking view of Word 2011 for Mac so I can record a meeting as well as take notes. The audio of the internal microphone is so low - can I attach an external mic and have it work with note taking view?

    Can I attach an external mic to my Macbook Air to enhance sound input for the note taking view of Word 2011 for Mac? I've tried preferences to up the volume of my sound, but I still cannot hear the recording. Any suggestions? I need to record a meeting as well as take notes so I'd like to use this tool, but the audio is not good enough.

    A USB microphone can work with the Air, and I've used them before with my 11" Air.  Griffin also made a product (the iMic) that will add a standard computer microphone port, connecting to your USB port.  It's heyday was the time of the old iBook laptops (which also lacked a microphone in jack) but I think it's still around.
    The single sound port on the 2011 models, as I recall, supports iPhone style headphone/microphone but I don't believe it will support a standard microphone input. 
    The built in microphone sits on the left side of the computer and I suspect wouldn't work well for picking up a lecture unless you were sitting just right in position vs. the speaker (preferably having the speaker positioned to the left and sitting really close).  By design most laptop microphones presume they are going to be mainly used to record a sound coming from the person sitting at the keyboard, while for a lecture you normally would prefer it concentrate on sound coming from behind the screen.

  • Can I use a MIDI keyboard as an input device for a software instrument?

    I have a Casio CTK-2100 that I am currently playing around with in Logic Pro 9. It can record and playback the different instruments fine using MIDI tracks. But I was wondering if it is possible to use the keyboard as an input device for a software instrument instead of the "Step Input Keyboard".
    Is it? If so, how do I set it up?

    Yes, the terminology can be a bear, many, many years ago when I started using Logic the manuals were written completely by the programmers, while they were quite humorous in places the were also really hard to understand so I learned/realized.. you can't really do anything so wrong it's going to destroy your computer so why not go ahead and experiment. I learned the basics of Logic without a manual, months later when I went back to find some some details I could figure out the manual made a lot more sense.
    Logic has been somewhat Appleized but it's not really an Apple program, it was purchased almost as developed as it is now... a lot of the additions a fluff to make it easier to understand for new users while at the same time there are some real improvements.
    This is personal opinion: With all of the forums/online tutorials...etc...etc. It seems users are learning (but not understanding) the same things, plus everyone wants to use it right away so nobody takes a deep breath and investigates on their own. Logic is a deep, deep program, while learning don't be afraid to go off on a tangent and explore the program without any other input, it can actually be inspirational. One other thing good about the manual or "Online Help", in looking up a function you will invariably come across a related concept that will provide further insight.
    And..... have fun.

  • Keyboard not working with xorg-server 1.6.1-1 or xkeyboard 1.5-1

    Hello!
    I have a problem with a no working keyboard. It seems like this is a problem related to some of the latest xkeyboard-config or xorg-server versions. This have been a problem some time, but it have been solved by downgrading xkeyboard-config to v1.5-1 and xorg-server to v1.6.1-1.
    I'm booting into runlevel 3. Keyboard is working in the terminal, but when I run startx, the keyboard stops working. The mouse works fine.
    Have tested with an empty xorg.conf file. Then I get a 'no screen found' error. And I have tryed to enable the keyboard entry in xorg.conf. X starts, but no keyboard. Hal is running.
    Any ideas?
    The xorg.conf and rc.conf
    # Copyright 2004 The X.Org Foundation
    Section "ServerLayout"
    Identifier "Laptop"
    Screen 0 "Default" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    # InputDevice "EvdevMouse" "CorePointer"
    # Inputdevice "Trackpoint" "SendCoreEvents"
    EndSection
    Section "ServerFlags"
    Option "AutoAddDevices" "True"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    EndSection
    Section "Monitor"
    Identifier "LCD"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "radeon_hd"
    Driver "fglrx"
    EndSection
    Section "Screen"
    Identifier "Default"
    Device "radeon_hd"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1440x900" "1024x768"
    Virtual 2720 1024
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    # /etc/rc.conf - Main Configuration for Arch Linux
    LOCALE="en_US.utf8"
    HARDWARECLOCK="UTC"
    USEDIRECTISA="no"
    TIMEZONE="Europe/Oslo"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    MOD_AUTOLOAD="yes"
    MODULES=(fglrx vboxdrv vboxnetadp acpi_cpufreq cpufreq_ondemand !pcspkr)
    USELVM="no"
    HOSTNAME="ArchT400"
    eth0="dhcp"
    INTERFACES=(!eth0)
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    DAEMONS=(syslog-ng network netfs hal laptop-mode cpufreq crond oss @autowifi @cups @openntpd @hddtemp)
    Last edited by orjanp (2009-08-11 13:07:41)

    Her er Xorg.0.log
    X.Org X Server 1.6.3
    Release Date: 2009-7-31
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH x86_64
    Current Operating System: Linux ArchT400 2.6.30-ARCH #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009 x86_64
    Build Date: 03 August 2009 08:17:16PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 12 10:39:18 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Laptop"
    (**) |-->Screen "Default" (0)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "radeon_hd"
    (==) No monitor specified for screen "Default".
    Using a default monitor configuration.
    (**) Option "AutoAddDevices" "True"
    (**) Automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Loader magic: 0x7540
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0:1:0:0) 1002:95c4:17aa:210e ATI Technologies Inc Mobility Radeon HD 3400 Series rev 0, Mem @ 0xd0000000/268435456, 0xcfff0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.4.0, module version = 1.0.0
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 7.4.0, module version = 1.0.0
    (II) Loading extension XFree86-DRI
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.63.2
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "fglrx"
    (II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
    (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.63.2
    Module class: X.Org Video Driver
    (II) Primary Device is: PCI 01@00:00:0
    (WW) Falling back to old probe method for fglrx
    (II) ATI Proprietary Linux Driver Version Identifier:8.63.2
    (II) ATI Proprietary Linux Driver Release Identifier: 8.632
    (II) ATI Proprietary Linux Driver Build Date: Jul 2 2009 12:25:51
    (II) Loading PCS database from /etc/ati/amdpcsdb
    (WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
    (WW) Video driver ABI version of the X server is 5.0
    (--) Assigning device section with no busID to primary device
    (--) Chipset Supported AMD Graphics Processor (0x95C4) found
    (II) AMD Video driver is running on a device belonging to a group targeted for this release
    (II) AMD Video driver is signed
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) fglrx(0): pEnt->device->identifier=0x154b6d0
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) fglrx(0): === [atiddxPreInit] === begin
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) fglrx(0): PCI bus 1 card 0 func 0
    (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) fglrx(0): Default visual is TrueColor
    (II) fglrx(0): 10BitPixelFormat disabled by default
    (==) fglrx(0): RGB weight 888
    (II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
    (==) fglrx(0): Gamma Correction for I is 0x06419064
    (==) fglrx(0): Gamma Correction for II is 0x06419064
    (==) fglrx(0): Buffer Tiling is ON
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports PCI:1:0:0
    (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (Chipset = 0x95c4)
    (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x210e)
    (--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
    (--) fglrx(0): MMIO registers at 0xcfff0000
    (--) fglrx(0): I/O port at 0x00002000
    (==) fglrx(0): ROM-BIOS at 0x000c0000
    (II) fglrx(0): Battery is used
    (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) fglrx(0): VESA BIOS detected
    (II) fglrx(0): VESA VBE Version 3.0
    (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
    (II) fglrx(0): VESA VBE OEM Software Rev: 10.88
    (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
    (II) fglrx(0): VESA VBE OEM Product: M82
    (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
    (II) fglrx(0): PCIE card detected
    (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    (WW) fglrx(0): board is an unknown third party board, chipset is supported
    (II) fglrx(0): Using adapter: 1:0.0.
    (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
    (II) fglrx(0): [pcie] 1986048 kB allocated
    (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
    (II) fglrx(0): Interrupt handler installed at IRQ 32.
    (II) fglrx(0): IRQ 32 Enabled.
    (II) fglrx(0): RandR 1.2 support is enabled!
    (II) fglrx(0): RandR 1.2 rotation support is enabled!
    (==) fglrx(0): Center Mode is disabled
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000002, disabled=0x00000000
    (II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
    (II) fglrx(0): Display1 EDID data ---------------------------
    (II) fglrx(0): Manufacturer: LEN Model: 4036 Serial#: 0
    (II) fglrx(0): Year: 2008 Week: 0
    (II) fglrx(0): EDID Version: 1.3
    (II) fglrx(0): Digital Display Input
    (II) fglrx(0): Max Image Size [cm]: horiz.: 30 vert.: 19
    (II) fglrx(0): Gamma: 2.20
    (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
    (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) fglrx(0): First detailed timing is preferred mode
    (II) fglrx(0): redX: 0.571 redY: 0.340 greenX: 0.338 greenY: 0.542
    (II) fglrx(0): blueX: 0.158 blueY: 0.125 whiteX: 0.313 whiteY: 0.329
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported detailed timing:
    (II) fglrx(0): clock: 101.6 MHz Image Size: 304 x 190 mm
    (II) fglrx(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1824 h_border: 0
    (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
    (II) fglrx(0): Supported detailed timing:
    (II) fglrx(0): clock: 85.6 MHz Image Size: 304 x 190 mm
    (II) fglrx(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1848 h_border: 0
    (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
    (WW) fglrx(0): Unknown vendor-specific block f
    (II) fglrx(0): LP141WP2-TLB1
    (II) fglrx(0): EDID (in hex):
    (II) fglrx(0): 00ffffffffffff0030ae364000000000
    (II) fglrx(0): 00120103801e1378ea4b859257568a28
    (II) fglrx(0): 20505400000001010101010101010101
    (II) fglrx(0): 010101010101b027a08051841a303020
    (II) fglrx(0): 360030be100000197021a09851841a30
    (II) fglrx(0): 3020360030be100000190000000f0095
    (II) fglrx(0): 0a32950a28191900320c3c01000000fe
    (II) fglrx(0): 004c503134315750322d544c4231001f
    (II) fglrx(0): End of Display1 EDID data --------------------
    (II) fglrx(0): Output LCD using monitor section LCD
    (II) fglrx(0): Output DFP1 has no monitor section
    (II) fglrx(0): Output CRT1 has no monitor section
    (II) fglrx(0): EDID vendor "LEN", prod id 16438
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
    (II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
    (II) fglrx(0): Output LCD connected
    (II) fglrx(0): Output DFP1 disconnected
    (II) fglrx(0): Output CRT1 disconnected
    (II) fglrx(0): Using user preference for initial modes
    (II) fglrx(0): Output LCD using initial mode 1440x900
    (++) fglrx(0): DPI set to (96, 96)
    (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) fglrx(0): QBS disabled
    (==) fglrx(0): FAST_SWAP disabled
    (==) fglrx(0): PseudoColor visuals disabled
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) fglrx(0): NoAccel = NO
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
    (==) fglrx(0): NoDRI = NO
    (==) fglrx(0): Capabilities: 0x00000000
    (==) fglrx(0): CapabilitiesEx: 0x00000000
    (==) fglrx(0): cpuFlags: 0x8000001d
    (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    (==) fglrx(0): UseFastTLS=0
    (==) fglrx(0): BlockSignalsOnLock=1
    (II) fglrx(0): Finished Initialize PPLIB!
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
    (WW) fglrx(0): could not detect X server version (query_status=-1)
    (II) Loading extension ATIFGLRXDRI
    (II) fglrx(0): doing DRIScreenInit
    (II) fglrx(0): DRIScreenInit for fglrx driver
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports PCI:1:0:0
    (II) fglrx(0): [drm] DRM interface version 1.0
    (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
    (II) fglrx(0): [drm] added 8192 byte SAREA at 0xcd000
    (II) fglrx(0): [drm] mapped SAREA 0xcd000 to 0x7f3e01f4b000
    (II) fglrx(0): [drm] framebuffer handle = 0xce000
    (II) fglrx(0): [drm] added 1 reserved context for kernel
    (II) fglrx(0): DRIScreenInit done
    (II) fglrx(0): Kernel Module Version Information:
    (II) fglrx(0): Name: fglrx
    (II) fglrx(0): Version: 8.63.2
    (II) fglrx(0): Date: Jul 2 2009
    (II) fglrx(0): Desc: ATI FireGL DRM kernel module
    (II) fglrx(0): Kernel Module version matches driver.
    (II) fglrx(0): Kernel Module Build Time Information:
    (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.30-ARCH
    (II) fglrx(0): Build-Kernel MODVERSIONS: no
    (II) fglrx(0): Build-Kernel __SMP__: yes
    (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    (II) fglrx(0): [drm] register handle = 0x000cf000
    (II) fglrx(0): Display width adjusted to to 2816 due to alignment constraints
    (II) fglrx(0): DRI initialization successfull!
    (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x0106a000
    (II) fglrx(0): FBMM initialized for area (0,0)-(2816,1528)
    (II) fglrx(0): FBMM auto alloc for area (0,0)-(2816,1024) (front color buffer - assumption)
    (II) fglrx(0): Largest offscreen area available: 2816 x 504
    (==) fglrx(0): Backing store disabled
    (II) Loading extension FGLRXEXTENSION
    (II) Loading extension ATITVOUT
    (II) fglrx(0): DPMS enabled
    (**) fglrx(0): Textured Video is enabled.
    (II) LoadModule: "glesx"
    (II) Loading /usr/lib/xorg/modules//glesx.so
    (II) Module glesx: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 1.0.0
    (II) Loading extension GLESX
    (II) fglrx(0): GLESX enableFlags = 94
    (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    Solid Horizontal and Vertical Lines
    Driver provided ScreenToScreenBitBlt replacement
    Driver provided FillSolidRects replacement
    (II) fglrx(0): GLESX is enabled
    (II) LoadModule: "amdxmm"
    (II) Loading /usr/lib/xorg/modules//amdxmm.so
    (II) Module amdxmm: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 1.0.0
    (II) Loading extension AMDXVOPL
    (II) fglrx(0): UVD2 feature is available
    (II) fglrx(0): Enable composite support successfully
    (II) fglrx(0): X context handle = 0x1
    (II) fglrx(0): [DRI] installation complete
    (==) fglrx(0): Silken mouse enabled
    (==) fglrx(0): Using HW cursor of display infrastructure!
    (==) fglrx(0): Using software cursor
    (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (WW) AIGLX: 3D driver claims to not support visual 0x23
    (WW) AIGLX: 3D driver claims to not support visual 0x24
    (WW) AIGLX: 3D driver claims to not support visual 0x25
    (WW) AIGLX: 3D driver claims to not support visual 0x26
    (WW) AIGLX: 3D driver claims to not support visual 0x27
    (WW) AIGLX: 3D driver claims to not support visual 0x28
    (WW) AIGLX: 3D driver claims to not support visual 0x29
    (WW) AIGLX: 3D driver claims to not support visual 0x2a
    (WW) AIGLX: 3D driver claims to not support visual 0x2b
    (WW) AIGLX: 3D driver claims to not support visual 0x2c
    (WW) AIGLX: 3D driver claims to not support visual 0x2d
    (WW) AIGLX: 3D driver claims to not support visual 0x2e
    (WW) AIGLX: 3D driver claims to not support visual 0x2f
    (WW) AIGLX: 3D driver claims to not support visual 0x30
    (WW) AIGLX: 3D driver claims to not support visual 0x31
    (WW) AIGLX: 3D driver claims to not support visual 0x32
    (WW) AIGLX: 3D driver claims to not support visual 0x33
    (WW) AIGLX: 3D driver claims to not support visual 0x34
    (WW) AIGLX: 3D driver claims to not support visual 0x35
    (WW) AIGLX: 3D driver claims to not support visual 0x36
    (WW) AIGLX: 3D driver claims to not support visual 0x37
    (WW) AIGLX: 3D driver claims to not support visual 0x38
    (WW) AIGLX: 3D driver claims to not support visual 0x39
    (WW) AIGLX: 3D driver claims to not support visual 0x3a
    (WW) AIGLX: 3D driver claims to not support visual 0x3b
    (WW) AIGLX: 3D driver claims to not support visual 0x3c
    (WW) AIGLX: 3D driver claims to not support visual 0x3d
    (WW) AIGLX: 3D driver claims to not support visual 0x3e
    (WW) AIGLX: 3D driver claims to not support visual 0x3f
    (WW) AIGLX: 3D driver claims to not support visual 0x40
    (WW) AIGLX: 3D driver claims to not support visual 0x41
    (WW) AIGLX: 3D driver claims to not support visual 0x42
    (WW) AIGLX: 3D driver claims to not support visual 0x43
    (WW) AIGLX: 3D driver claims to not support visual 0x44
    (WW) AIGLX: 3D driver claims to not support visual 0x45
    (WW) AIGLX: 3D driver claims to not support visual 0x46
    (WW) AIGLX: 3D driver claims to not support visual 0x47
    (WW) AIGLX: 3D driver claims to not support visual 0x48
    (WW) AIGLX: 3D driver claims to not support visual 0x49
    (WW) AIGLX: 3D driver claims to not support visual 0x4a
    (WW) AIGLX: 3D driver claims to not support visual 0x4b
    (WW) AIGLX: 3D driver claims to not support visual 0x4c
    (WW) AIGLX: 3D driver claims to not support visual 0x4d
    (WW) AIGLX: 3D driver claims to not support visual 0x4e
    (WW) AIGLX: 3D driver claims to not support visual 0x4f
    (WW) AIGLX: 3D driver claims to not support visual 0x50
    (WW) AIGLX: 3D driver claims to not support visual 0x51
    (WW) AIGLX: 3D driver claims to not support visual 0x52
    (WW) AIGLX: 3D driver claims to not support visual 0x53
    (WW) AIGLX: 3D driver claims to not support visual 0x54
    (WW) AIGLX: 3D driver claims to not support visual 0x55
    (WW) AIGLX: 3D driver claims to not support visual 0x56
    (WW) AIGLX: 3D driver claims to not support visual 0x57
    (WW) AIGLX: 3D driver claims to not support visual 0x58
    (WW) AIGLX: 3D driver claims to not support visual 0x59
    (WW) AIGLX: 3D driver claims to not support visual 0x5a
    (WW) AIGLX: 3D driver claims to not support visual 0x5b
    (WW) AIGLX: 3D driver claims to not support visual 0x5c
    (WW) AIGLX: 3D driver claims to not support visual 0x5d
    (WW) AIGLX: 3D driver claims to not support visual 0x5e
    (WW) AIGLX: 3D driver claims to not support visual 0x5f
    (WW) AIGLX: 3D driver claims to not support visual 0x60
    (WW) AIGLX: 3D driver claims to not support visual 0x61
    (WW) AIGLX: 3D driver claims to not support visual 0x62
    (WW) AIGLX: 3D driver claims to not support visual 0x63
    (WW) AIGLX: 3D driver claims to not support visual 0x64
    (WW) AIGLX: 3D driver claims to not support visual 0x65
    (WW) AIGLX: 3D driver claims to not support visual 0x66
    (WW) AIGLX: 3D driver claims to not support visual 0x67
    (WW) AIGLX: 3D driver claims to not support visual 0x68
    (WW) AIGLX: 3D driver claims to not support visual 0x69
    (WW) AIGLX: 3D driver claims to not support visual 0x6a
    (WW) AIGLX: 3D driver claims to not support visual 0x6b
    (WW) AIGLX: 3D driver claims to not support visual 0x6c
    (WW) AIGLX: 3D driver claims to not support visual 0x6d
    (WW) AIGLX: 3D driver claims to not support visual 0x6e
    (WW) AIGLX: 3D driver claims to not support visual 0x6f
    (WW) AIGLX: 3D driver claims to not support visual 0x70
    (WW) AIGLX: 3D driver claims to not support visual 0x71
    (WW) AIGLX: 3D driver claims to not support visual 0x72
    (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) fglrx(0): Enable the clock gating!
    (II) fglrx(0): Setting screen physical size to 381 x 238
    (II) config/hal: Adding input device ThinkPad Extra Buttons
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 2.2.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) ThinkPad Extra Buttons: always reports core events
    (**) ThinkPad Extra Buttons: Device: "/dev/input/event6"
    (II) ThinkPad Extra Buttons: Found keys
    (II) ThinkPad Extra Buttons: Configuring as keyboard
    (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us,no"
    (**) Option "xkb_options" "grp:alt_shift_toggle"
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) config/hal: Adding input device TPPS/2 IBM TrackPoint
    (**) TPPS/2 IBM TrackPoint: always reports core events
    (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
    (II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    (II) TPPS/2 IBM TrackPoint: Found x and y relative axes
    (II) TPPS/2 IBM TrackPoint: Configuring as mouse
    (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
    (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    (**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
    (**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
    (**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
    (II) config/hal: Adding input device Logitech USB Receiver
    (**) Logitech USB Receiver: always reports core events
    (**) Logitech USB Receiver: Device: "/dev/input/event9"
    (II) Logitech USB Receiver: Found 20 mouse buttons
    (II) Logitech USB Receiver: Found x and y relative axes
    (II) Logitech USB Receiver: Found scroll wheel(s)
    (II) Logitech USB Receiver: Configuring as mouse
    (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
    (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    (**) Logitech USB Receiver: (accel) filter chain progression: 2.00
    (**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
    (**) Logitech USB Receiver: (accel) set acceleration profile 0
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us,no"
    (**) Option "xkb_options" "grp:alt_shift_toggle"
    (II) config/hal: Adding input device Logitech USB Receiver
    (**) Logitech USB Receiver: always reports core events
    (**) Logitech USB Receiver: Device: "/dev/input/event10"
    (II) Logitech USB Receiver: Found 1 mouse buttons
    (II) Logitech USB Receiver: Found scroll wheel(s)
    (II) Logitech USB Receiver: Found keys
    (II) Logitech USB Receiver: Configuring as keyboard
    (II) Logitech USB Receiver: Adding scrollwheel support
    (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us,no"
    (**) Option "xkb_options" "grp:alt_shift_toggle"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event5"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us,no"
    (**) Option "xkb_options" "grp:alt_shift_toggle"
    (II) fglrx(0): EDID vendor "LEN", prod id 16438
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
    (II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
    (II) fglrx(0): EDID vendor "LEN", prod id 16438
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
    (II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
    Last edited by orjanp (2009-08-12 08:43:13)

  • Keyboard not working after suspend to ram

    Hi,
    I have this problem since I have my notebook. Is a sony vaio cs.
    After suspend to ram the keyboard does't work.
    I've read in other forums that is a general gnu/linux problem, not only arch, and I think is related with the i8042 driver and generally hp pavillions have it.
    cat /var/log/pm-suspend.log:
    Initial commandline parameters: --quirk-dpms-suspend
    --quirk-dpms-on
    --quirk-vbestate-restore
    --quirk-vbemode-restore
    --quirk-vga-mode3
    --quirk-vbe-post
    Thu Aug 13 22:39:47 UYT 2009: Running hooks for suspend.
    /usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux vaio 2.6.30-ARCH #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009 x86_64 Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz GenuineIntel GNU/Linux
    Module Size Used by
    i915 206216 1
    drm 190080 2 i915
    i2c_algo_bit 6996 1 i915
    joydev 13312 0
    snd_hda_codec_realtek 278132 1
    btusb 15364 0
    bluetooth 65668 1 btusb
    fan 5656 0
    uvcvideo 68316 0
    videodev 42048 1 uvcvideo
    v4l1_compat 18228 2 uvcvideo,videodev
    v4l2_compat_ioctl32 10992 1 videodev
    arc4 2192 2
    vboxdrv 1723308 0
    ecb 3536 2
    snd_seq_dummy 3540 0
    cpufreq_powersave 1872 2
    sdhci_pci 9200 0
    sdhci 20116 1 sdhci_pci
    snd_seq_oss 36224 0
    snd_hda_intel 31208 2
    snd_hda_codec 82128 2 snd_hda_codec_realtek,snd_hda_intel
    iwlagn 108980 0
    snd_seq_midi_event 8592 1 snd_seq_oss
    snd_seq 64640 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 8324 3 snd_seq_dummy,snd_seq_oss,snd_seq
    cpufreq_ondemand 9256 0
    mmc_core 61984 1 sdhci
    snd_hwdep 9976 1 snd_hda_codec
    iwlcore 112976 1 iwlagn
    snd_pcm_oss 47328 0
    snd_mixer_oss 20976 1 snd_pcm_oss
    snd_pcm 90872 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
    mac80211 211296 2 iwlagn,iwlcore
    ohci1394 34180 0
    sony_laptop 35224 0
    psmouse 60404 0
    snd_timer 25344 2 snd_seq,snd_pcm
    uhci_hcd 27056 0
    ehci_hcd 40668 0
    i2c_i801 11632 0
    acpi_cpufreq 10272 0
    led_class 5112 2 sdhci,iwlcore
    battery 14072 0
    ieee1394 98880 1 ohci1394
    rfkill 13108 5 iwlcore,sony_laptop
    thermal 17712 0
    video 24268 1 i915
    output 3792 1 video
    serio_raw 7188 0
    snd 76744 15 snd_hda_codec_realtek,snd_seq_oss,snd_hda_intel,snd_hda_codec,snd_seq,snd_seq_device,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
    soundcore 8576 1 snd
    snd_page_alloc 10784 2 snd_hda_intel,snd_pcm
    cfg80211 78120 3 iwlagn,iwlcore,mac80211
    pcspkr 3088 0
    intel_agp 33104 1
    usbcore 179376 5 btusb,uvcvideo,uhci_hcd,ehci_hcd
    i2c_core 26816 4 i915,drm,i2c_algo_bit,i2c_i801
    ac 5720 0
    sky2 56820 0
    button 7216 0
    sg 33824 0
    freq_table 4528 2 cpufreq_ondemand,acpi_cpufreq
    iTCO_wdt 13648 0
    iTCO_vendor_support 3828 1 iTCO_wdt
    evdev 12928 14
    processor 42064 3 acpi_cpufreq
    rtc_cmos 13592 0
    rtc_core 22212 1 rtc_cmos
    rtc_lib 3120 1 rtc_core
    ext4 256304 2
    mbcache 8980 1 ext4
    jbd2 69088 1 ext4
    crc16 2096 1 ext4
    sr_mod 19460 0
    sd_mod 30696 4
    cdrom 41288 1 sr_mod
    ahci 40992 3
    libata 192460 1 ahci
    scsi_mod 131736 4 sg,sr_mod,sd_mod,libata
    total used free shared buffers cached
    Mem: 3907796 1913868 1993928 0 65068 1566872
    -/+ buffers/cache: 281928 3625868
    Swap: 2441872 0 2441872
    success.
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/55wicd suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
    /etc/pm/sleep.d/99laptop-mode suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
    success.
    Thu Aug 13 22:39:50 UYT 2009: performing suspend
    Thu Aug 13 22:40:10 UYT 2009: Awake.
    Thu Aug 13 22:40:10 UYT 2009: Running hooks for resume
    /usr/lib/pm-utils/sleep.d/99video resume suspend: success.
    /etc/pm/sleep.d/99laptop-mode resume suspend: success.
    /usr/lib/pm-utils/sleep.d/98smart-kernel-video resume suspend: success.
    /usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
    /usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
    /usr/lib/pm-utils/sleep.d/55wicd resume suspend: success.
    /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
    /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
    /usr/lib/pm-utils/sleep.d/01grub resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
    /usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
    /usr/lib/pm-utils/sleep.d/00auto-quirk resume suspend: success.
    Thu Aug 13 22:40:13 UYT 2009: Finished.
    Please ask me for more info if needed.

    I had this issue for almost a year with my Sony CS190. After a clean install, it still exists. So,
    After suspending the keyboard doesn't work, and unbinding/binding i8042 only helps touchpad, not keyboard.
    EDIT: PS: Keyboard & Touchpad work fine after hibernate.
    cat /var/log/Xorg.0.log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.3.901 (1.6.4 RC 1)
    Release Date: 2009-8-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH i686
    Current Operating System: Linux ArchTiger 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009 i686
    Build Date: 04 September 2009 03:37:03PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 4 11:01:41 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) No Layout section. Using the first Screen section.
    (**) |-->Screen "Default Screen" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) Option "DontZap" "false"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Loader magic: 0xec0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0:0:2:0) 8086:2a42:104d:903f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x000060f0/8
    (--) PCI: (0:0:2:1) 8086:2a43:104d:903f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd3400000/1048576
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 2.8.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
    965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
    IGDNG_M
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "DRI" "false"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
    (--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
    (II) intel(0): Output VGA1 using monitor section Monitor0
    (II) intel(0): Output LVDS1 has no monitor section
    (II) intel(0): Output VGA1 disconnected
    (II) intel(0): Output LVDS1 connected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS1 using initial mode 1280x800
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (**) intel(0): Kernel mode setting active, disabling FBC.
    (**) intel(0): Framebuffer compression disabled
    (**) intel(0): Tiling enabled
    (**) intel(0): SwapBuffers wait enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) UXA(0): Driver registered support for the following operations:
    (II) solid
    (II) copy
    (II) composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): No memory allocations
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (**) Option "dpms" "true"
    (**) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): direct rendering: Disabled
    (WW) intel(0): Option "AccelMethod" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    (II) AIGLX: Screen 0 is not DRI capable
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
    (II) GLX: Initialized DRISWRAST GL provider for screen 0
    (II) intel(0): Setting screen physical size to 338 x 211
    (II) intel(0): Allocate new frame buffer 1280x800 stride 1280
    (II) config/hal: Adding input device Sony Vaio Keys
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Sony Vaio Keys: always reports core events
    (**) Sony Vaio Keys: Device: "/dev/input/event10"
    (II) Sony Vaio Keys: Found keys
    (II) Sony Vaio Keys: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event5"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
    (**) Logitech VoIP USB Dual RF Receiver: always reports core events
    (**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event4"
    (II) Logitech VoIP USB Dual RF Receiver: Found 12 mouse buttons
    (II) Logitech VoIP USB Dual RF Receiver: Found x and y relative axes
    (II) Logitech VoIP USB Dual RF Receiver: Found scroll wheel(s)
    (II) Logitech VoIP USB Dual RF Receiver: Found keys
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as mouse
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
    (**) Logitech VoIP USB Dual RF Receiver: YAxisMapping: buttons 4 and 5
    (**) Logitech VoIP USB Dual RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (**) Logitech VoIP USB Dual RF Receiver: (accel) keeping acceleration scheme 1
    (**) Logitech VoIP USB Dual RF Receiver: (accel) filter chain progression: 2.00
    (**) Logitech VoIP USB Dual RF Receiver: (accel) filter stage 0: 20.00 ms
    (**) Logitech VoIP USB Dual RF Receiver: (accel) set acceleration profile 0
    (II) Logitech VoIP USB Dual RF Receiver: initialized for relative axes.
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
    (**) Logitech VoIP USB Dual RF Receiver: always reports core events
    (**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event3"
    (II) Logitech VoIP USB Dual RF Receiver: Found keys
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device UVC Camera (05ca:183f)
    (**) UVC Camera (05ca:183f): always reports core events
    (**) UVC Camera (05ca:183f): Device: "/dev/input/event2"
    (II) UVC Camera (05ca:183f): Found keys
    (II) UVC Camera (05ca:183f): Configuring as keyboard
    (II) XINPUT: Adding extended input device "UVC Camera (05ca:183f)" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event8"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event13"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event7"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) PS/2 Generic Mouse: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) PS/2 Generic Mouse: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) intel(0): Allocate new frame buffer 1024x768 stride 1024
    (II) intel(0): Allocate new frame buffer 2960x1050 stride 3072
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) PS/2 Generic Mouse: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) config/hal: removing device AT Translated Set 2 keyboard
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) intel(0): Allocate new frame buffer 1280x800 stride 1280
    (II) intel(0): Allocate new frame buffer 2960x800 stride 3072
    (II) intel(0): Allocate new frame buffer 1280x800 stride 1280
    (II) intel(0): Allocate new frame buffer 2960x800 stride 3072
    (II) intel(0): Allocate new frame buffer 1280x800 stride 1280
    (II) config/hal: removing device PS/2 Generic Mouse
    (II) PS/2 Generic Mouse: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event1"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event5"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: removing device PS/2 Generic Mouse
    (II) PS/2 Generic Mouse: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: removing device SynPS/2 Synaptics TouchPad
    (II) UnloadModule: "synaptics"
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event1"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event5"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: removing device Sony Vaio Keys
    (II) Sony Vaio Keys: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: Adding input device Sony Vaio Keys
    (**) Sony Vaio Keys: always reports core events
    (**) Sony Vaio Keys: Device: "/dev/input/event10"
    (II) Sony Vaio Keys: Found keys
    (II) Sony Vaio Keys: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: removing device PS/2 Generic Mouse
    (II) PS/2 Generic Mouse: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: removing device SynPS/2 Synaptics TouchPad
    (II) UnloadModule: "synaptics"
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event1"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event5"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: Adding input device AT Raw Set 2 keyboard
    (**) AT Raw Set 2 keyboard: always reports core events
    (**) AT Raw Set 2 keyboard: Device: "/dev/input/event12"
    (II) AT Raw Set 2 keyboard: Found keys
    (II) AT Raw Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Raw Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: removing device AT Raw Set 2 keyboard
    (II) AT Raw Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: removing device PS/2 Generic Mouse
    (II) PS/2 Generic Mouse: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: removing device SynPS/2 Synaptics TouchPad
    (II) UnloadModule: "synaptics"
    (II) config/hal: removing device Logitech VoIP USB Dual RF Receiver
    (II) Logitech VoIP USB Dual RF Receiver: Close
    (II) UnloadModule: "evdev"
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) config/hal: removing device Logitech VoIP USB Dual RF Receiver
    (II) Logitech VoIP USB Dual RF Receiver: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event1"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event3"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
    (**) Logitech VoIP USB Dual RF Receiver: always reports core events
    (**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event4"
    (II) Logitech VoIP USB Dual RF Receiver: Found keys
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
    (**) Logitech VoIP USB Dual RF Receiver: always reports core events
    (**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event5"
    (II) Logitech VoIP USB Dual RF Receiver: Found 12 mouse buttons
    (II) Logitech VoIP USB Dual RF Receiver: Found x and y relative axes
    (II) Logitech VoIP USB Dual RF Receiver: Found scroll wheel(s)
    (II) Logitech VoIP USB Dual RF Receiver: Found keys
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as mouse
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
    (**) Logitech VoIP USB Dual RF Receiver: YAxisMapping: buttons 4 and 5
    (**) Logitech VoIP USB Dual RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (**) Logitech VoIP USB Dual RF Receiver: (accel) keeping acceleration scheme 1
    (**) Logitech VoIP USB Dual RF Receiver: (accel) filter chain progression: 2.00
    (**) Logitech VoIP USB Dual RF Receiver: (accel) filter stage 0: 20.00 ms
    (**) Logitech VoIP USB Dual RF Receiver: (accel) set acceleration profile 0
    (II) Logitech VoIP USB Dual RF Receiver: initialized for relative axes.
    cat /var/log/kernel.log
    Oct 4 13:33:04 ArchTiger kernel: PM: Syncing filesystems ... done.
    Oct 4 13:33:04 ArchTiger kernel: Freezing user space processes ... (elapsed 0.00 seconds) done.
    Oct 4 13:33:04 ArchTiger kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    Oct 4 13:33:04 ArchTiger kernel: Suspending console(s) (use no_console_suspend to debug)
    Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
    Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Stopping disk
    Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PCI INT B disabled
    Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
    Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PCI INT A disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: PCI INT D disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
    Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: PCI INT A disabled
    Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PCI INT D disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: PCI INT B disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: PCI INT A disabled
    Oct 4 13:33:04 ArchTiger kernel: [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Oct 4 13:33:04 ArchTiger kernel: ACPI: Preparing to enter system sleep state S3
    Oct 4 13:33:04 ArchTiger kernel: Disabling non-boot CPUs ...
    Oct 4 13:33:04 ArchTiger kernel: CPU 1 is now offline
    Oct 4 13:33:04 ArchTiger kernel: SMP alternatives: switching to UP code
    Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
    Oct 4 13:33:04 ArchTiger kernel: CPU1 attaching NULL sched-domain.
    Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
    Oct 4 13:33:04 ArchTiger kernel: CPU1 is down
    Oct 4 13:33:04 ArchTiger kernel: Extended CMOS year: 2000
    Oct 4 13:33:04 ArchTiger kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Oct 4 13:33:04 ArchTiger kernel: Intel machine check architecture supported.
    Oct 4 13:33:04 ArchTiger kernel: Intel machine check reporting enabled on CPU#0.
    Oct 4 13:33:04 ArchTiger kernel: Back to C!
    Oct 4 13:33:04 ArchTiger kernel: Extended CMOS year: 2000
    Oct 4 13:33:04 ArchTiger kernel: Enabling non-boot CPUs ...
    Oct 4 13:33:04 ArchTiger kernel: SMP alternatives: switching to SMP code
    Oct 4 13:33:04 ArchTiger kernel: Booting processor 1 APIC 0x1 ip 0x6000
    Oct 4 13:33:04 ArchTiger kernel: Initializing CPU#1
    Oct 4 13:33:04 ArchTiger kernel: Calibrating delay using timer specific routine.. 5059.62 BogoMIPS (lpj=8429792)
    Oct 4 13:33:04 ArchTiger kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
    Oct 4 13:33:04 ArchTiger kernel: CPU: L2 cache: 6144K
    Oct 4 13:33:04 ArchTiger kernel: CPU: Physical Processor ID: 0
    Oct 4 13:33:04 ArchTiger kernel: CPU: Processor Core ID: 1
    Oct 4 13:33:04 ArchTiger kernel: Intel machine check architecture supported.
    Oct 4 13:33:04 ArchTiger kernel: Intel machine check reporting enabled on CPU#1.
    Oct 4 13:33:04 ArchTiger kernel: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    Oct 4 13:33:04 ArchTiger kernel: CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
    Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
    Oct 4 13:33:04 ArchTiger kernel: Switched to high resolution mode on CPU 1
    Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching sched-domain:
    Oct 4 13:33:04 ArchTiger kernel: domain 0: span 0-1 level MC
    Oct 4 13:33:04 ArchTiger kernel: groups: 0 1
    Oct 4 13:33:04 ArchTiger kernel: CPU1 attaching sched-domain:
    Oct 4 13:33:04 ArchTiger kernel: domain 0: span 0-1 level MC
    Oct 4 13:33:04 ArchTiger kernel: groups: 1 0
    Oct 4 13:33:04 ArchTiger kernel: CPU1 is up
    Oct 4 13:33:04 ArchTiger kernel: ACPI: Waking up from system sleep state S3
    Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
    Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
    Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd131d041)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd670d570)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x5040)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x20200)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x3ff)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xd231d141)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xd560d460)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x6 (was 0x0, writing 0x30300)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xd331d241)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xd450d360)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x6 (was 0x0, writing 0x50400)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xd350d350)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
    Oct 4 13:33:04 ArchTiger kernel: ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x4001)
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd5700004)
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd4600004)
    Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406)
    Oct 4 13:33:04 ArchTiger kernel: ohci1394 0000:06:02.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
    Oct 4 13:33:04 ArchTiger kernel: ohci1394 0000:06:02.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xd3500900)
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: restoring config space at offset 0x4 (was 0x0, writing 0xd3500800)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
    Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:02.1: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb3: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb4: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb5: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb6: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb7: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: ahci 0000:00:1f.2: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: Radio Frequency Kill Switch is On:
    Oct 4 13:33:04 ArchTiger kernel: Kill switch must be turned off for wireless networking to work.
    Oct 4 13:33:04 ArchTiger kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[d3500000-d35007ff] Max Packet=[2048] IR/IT contexts=[4/4]
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: Will use DMA mode even though HW doesn't fully claim to support it.
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Starting disk
    Oct 4 13:33:04 ArchTiger kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Oct 4 13:33:04 ArchTiger kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:04 ArchTiger kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:04 ArchTiger kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Oct 4 13:33:04 ArchTiger kernel: ata1.00: configured for UDMA/133
    Oct 4 13:33:04 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
    Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1 failed to resume: error -19
    Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
    Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1.1 failed to resume: error -19
    Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
    Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1.2 failed to resume: error -19
    Oct 4 13:33:04 ArchTiger kernel: Restarting tasks ... <6>usb 5-1: USB disconnect, address 2
    Oct 4 13:33:04 ArchTiger kernel: usb 5-1.1: USB disconnect, address 3
    Oct 4 13:33:04 ArchTiger kernel: done.
    Oct 4 13:33:04 ArchTiger kernel: usb 5-1.2: USB disconnect, address 4
    Oct 4 13:33:05 ArchTiger kernel: i8042.c: Detected active multiplexing controller, rev 1.1.
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
    Oct 4 13:33:05 ArchTiger kernel: sky2 eth0: enabling interface
    Oct 4 13:33:05 ArchTiger kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
    Oct 4 13:33:05 ArchTiger kernel: iwlagn 0000:03:00.0: Radio disabled by HW RF Kill switch
    Oct 4 13:33:05 ArchTiger kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Oct 4 13:33:05 ArchTiger kernel: wlan0: Failed to config new BSSID to the low-level driver
    Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 1
    Oct 4 13:33:05 ArchTiger kernel: CPU0 attaching NULL sched-domain.
    Oct 4 13:33:05 ArchTiger kernel: CPU1 attaching NULL sched-domain.
    Oct 4 13:33:05 ArchTiger kernel: CPU0 attaching sched-domain:
    Oct 4 13:33:05 ArchTiger kernel: domain 0: span 0-1 level MC
    Oct 4 13:33:05 ArchTiger kernel: groups: 0 1
    Oct 4 13:33:05 ArchTiger kernel: CPU1 attaching sched-domain:
    Oct 4 13:33:05 ArchTiger kernel: domain 0: span 0-1 level MC
    Oct 4 13:33:05 ArchTiger kernel: groups: 1 0
    Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 2
    Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 3
    Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 timed out
    Oct 4 13:33:06 ArchTiger kernel: psmouse serio22: ID: 10 00 64
    Oct 4 13:33:06 ArchTiger kernel: sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
    Oct 4 13:33:06 ArchTiger kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    Oct 4 13:33:07 ArchTiger kernel: input: PS/2 Generic Mouse as /devices/platform/i8042/serio22/input/input23
    Oct 4 13:33:07 ArchTiger kernel: Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000
    Oct 4 13:33:07 ArchTiger kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio24/input/input24
    Oct 4 13:33:08 ArchTiger kernel: ata2.00: qc timeout (cmd 0xef)
    Oct 4 13:33:08 ArchTiger kernel: ata2.00: failed to set xfermode (err_mask=0x4)
    Oct 4 13:33:09 ArchTiger kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Oct 4 13:33:09 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:09 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:09 ArchTiger kernel: ata2.00: configured for UDMA/33
    Oct 4 13:33:09 ArchTiger kernel: ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x18 t4
    Oct 4 13:33:09 ArchTiger kernel: ata2: irq_stat 0x40000001
    Oct 4 13:33:09 ArchTiger kernel: ata2: EH complete
    Oct 4 13:33:10 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
    Oct 4 13:33:17 ArchTiger kernel: eth0: no IPv6 routers present
    Oct 4 13:33:29 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 1 bytes away.
    Oct 4 13:33:30 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
    Oct 4 13:33:32 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
    Oct 4 13:34:04 ArchTiger kernel: usb 5-1: new full speed USB device using uhci_hcd and address 5
    Oct 4 13:34:04 ArchTiger kernel: usb 5-1: configuration #1 chosen from 1 choice
    Oct 4 13:34:04 ArchTiger kernel: hub 5-1:1.0: USB hub found
    Oct 4 13:34:04 ArchTiger kernel: hub 5-1:1.0: 2 ports detected
    Oct 4 13:34:04 ArchTiger kernel: usb 5-1.1: new full speed USB device using uhci_hcd and address 6
    Oct 4 13:34:05 ArchTiger kernel: usb 5-1.1: configuration #1 chosen from 1 choice
    Oct 4 13:34:05 ArchTiger kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input25
    Oct 4 13:34:05 ArchTiger kernel: generic-usb 0003:046D:C51C.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:1d.0-1.1/input0
    Oct 4 13:34:05 ArchTiger kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input26
    Oct 4 13:34:05 ArchTiger kernel: generic-usb 0003:046D:C51C.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:1d.0-1.1/input1
    Oct 4 13:34:05 ArchTiger kernel: usb 5-1.2: new full speed USB device using uhci_hcd and address 7
    Oct 4 13:34:05 ArchTiger kernel: usb 5-1.2: configuration #1 chosen from 1 choice
    cat /var/log/pm-suspend.log
    Initial commandline parameters:
    Sun Oct 4 13:34:08 EDT 2009: Running hooks for suspend.
    /usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-dpms-on --quirk-dpms-suspend --quirk-vbe-post --quirk-vbemode-restore --quirk-vbestate-restore --quirk-vga-mode-3
    success.
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux ArchTiger 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009 i686 Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz GenuineIntel GNU/Linux
    Module Size Used by
    sony_laptop 29520 0
    vboxdrv 134376 0
    ipv6 277876 14
    fuse 60896 2
    fan 4392 0
    msr 3240 0
    cpufreq_ondemand 7672 2
    acpi_cpufreq 8624 0
    freq_table 3716 2 cpufreq_ondemand,acpi_cpufreq
    snd_seq_dummy 2696 0
    snd_seq_oss 31168 0
    snd_seq_midi_event 7012 1 snd_seq_oss
    snd_seq 53744 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    arc4 1732 2
    ecb 2788 2
    iwlagn 95208 0
    sdhci_pci 7300 0
    sdhci 17128 1 sdhci_pci
    iwlcore 96132 1 iwlagn
    mac80211 182976 2 iwlagn,iwlcore
    snd_pcm_oss 40352 0
    ohci1394 30196 0
    mmc_core 52704 1 sdhci
    snd_mixer_oss 17540 1 snd_pcm_oss
    led_class 3976 2 sdhci,iwlcore
    ieee1394 85324 1 ohci1394
    battery 10984 0
    ac 4360 0
    cfg80211 67364 3 iwlagn,iwlcore,mac80211
    rfkill 10640 5 sony_laptop,iwlcore
    thermal 13888 0
    button 5556 0
    snd_hda_codec_realtek 206568 1
    snd_usb_audio 86304 3
    snd_usb_lib 17252 1 snd_usb_audio
    snd_rawmidi 21856 1 snd_usb_lib
    snd_seq_device 6768 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
    i915 184872 2
    processor 35864 3 acpi_cpufreq
    joydev 10400 0
    drm 154656 2 i915
    snd_hda_intel 26664 2
    snd_hda_codec 71716 2 snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep 7656 2 snd_usb_audio,snd_hda_codec
    snd_pcm 73512 6 snd_pcm_oss,snd_usb_audio,snd_hda_intel,snd_hda_codec
    snd_timer 21100 2 snd_seq,snd_pcm
    snd 58436 21 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_usb_audio,snd_rawmidi,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    snd_page_alloc 8876 2 snd_hda_intel,snd_pcm
    usbhid 40608 0
    hid 42496 1 usbhid
    i2c_algo_bit 5864 1 i915
    uvcvideo 61040 0
    videodev 36544 1 uvcvideo
    v4l1_compat 15688 2 uvcvideo,videodev
    video 19832 1 i915
    btusb 12632 0
    bluetooth 56676 1 btusb
    output 2884 1 video
    psmouse 59644 0
    i2c_i801 9656 0
    i2c_core 22776 4 i915,drm,i2c_algo_bit,i2c_i801
    intel_agp 27484 1
    agpgart 32756 2 drm,intel_agp
    sg 27928 0
    iTCO_wdt 10952 0
    iTCO_vendor_support 3080 1 iTCO_wdt
    serio_raw 5704 0
    bridge 54008 0
    sky2 47240 0
    evdev 10176 19
    stp 2088 1 bridge
    llc 5552 2 bridge,stp
    tun 13572 0
    soundcore 6784 1 snd
    rtc_cmos 11212 0
    rtc_core 18048 1 rtc_cmos
    rtc_lib 2500 1 rtc_core
    ext3 134380 3
    jbd 48504 1 ext3
    mbcache 7080 1 ext3
    sr_mod 16612 0
    cdrom 36032 1 sr_mod
    sd_mod 27328 5
    uhci_hcd 23540 0
    ehci_hcd 36112 0
    usbcore 150160 8 snd_usb_audio,snd_usb_lib,usbhid,uvcvideo,btusb,uhci_hcd,ehci_hcd
    ahci 34004 4
    libata 168044 1 ahci
    scsi_mod 110708 4 sg,sr_mod,sd_mod,libata
    total used free shared buffers cached
    Mem: 2980024 2880848 99176 0 108764 2400148
    -/+ buffers/cache: 371936 2608088
    Swap: 1052216 0 1052216
    success.
    Let me know, if you need any other output.
    Thanks
    Last edited by Sir_Leon (2009-10-04 17:56:47)

  • SRM's WDJ application is not taking custom theme

    Hi All,
    I'm working on the Portal branding. We have SRM BP deployed in our portal. I've created custom theme and desktop for the user.
    I'm able to see the portal's different section as per custom theme. WDA/WDJ application's UI which is opening in the content area of portal is also showing as per theme.
    When I'm trying to access the SRM BP portal content which is the collection WDA/WDJ application, inside portal content area showing as per theme. But one WDJ Iview related to MDM catlog data is opening in new window, in that WDJ UI is not taking custom theme color. UI is showing default theme "tradeshow".
    I tried few SAP note(Note 1446099 - Web Dynpro application not displayed in customer theme) to synch the patch of portal and WDJ stylsheet but no luck.
    Pl share your input to solve the issue.
    Thanks!!!
    Deepak

    Hi Shishil,
    Thanks for reply. Yes MDM component is in the same server.
    I've tried below option to fix the issue but no luck:-
    >Note 1446099 - Web Dynpro application not displayed in customer theme
    >Note 1012065 - Technical Web Dynpro configuration in SAP NetWeaver 7.1
    >Note 1000889 - CSS Style Sheet Integration of Web Dynpro and the Portal
    >http://help.sap.com/saphelp_nw70/helpdata/en/1e/535d420447e054e10000000a155106/frameset.htm
    When i tried to set the default Web Dynpro theme by modifying the sap.theme.default property, which is also located in the Propertysheet default folder with the below URL, no success:-
    http://<host>:<port>//irj/portalapps/com.sap.portal.themes.lafservice /themes/portal/sap_chrome.
    Deepak!!!

  • USB Keyboard not working after running Monolingual

    Okay, I'm not a Mac person and should have known that I was going to mess up my mother's iMac, but here it is -
    In an attempt to improve the mac's performance I performed all of the actions described in the following article: 11 Ways to Optimize your Mac's Performance     ( http://lowendmac.com/eubanks/07/0312.html ). Basically, I cleaned up files and 'other' system preferences. Things seemed to be fine and the computer did run much better. However, after running Monolingual and deleting what I understood to be 'unnecessary' PowerPC files the standard USB keyboard is no longer working.
    I've tried to search for various remedies, but have come to a dead end. So I'm left with reinstalling the Snow Leopard OS (I think it is 10.6.8?) BUT I can't because it is asking to input the account password (which I know) to make the change and I can't figure how to do that when the keyboard not working.
    Any help would be great!
    *feeling like a bone head*

    How are you trying to reinstall Snow Leopard? If you're booting from the Snow Leopard or iMac Install DVD that came with the system then that should eliminate any of the issues you may or may not have caused when you deleted did the clean up work on your mom's system.
    I suggest trying the following:
    0) Verify that the caps lock key is off. It can make inputting passwords difficult if you don't realize it is ON.
    1) Reset the PRAM by restarting the system then quickly press the command-option-P-R keys before the gray screen appears. Wait until you hear the computer restarts two times as indicated by the startup chime. For more info refer to http://support.apple.com/kb/ht1379.
    2) If the issue persists after the PRAM reset then boot from the Snow Leopard or iMac Install DVD, whichever you have. Once you see the menu asking you to choose a language try using the arrow keys on the keyboard to move the language choice selection. If the arrow keys are working at this point it indicates your keyboard is at least partially functional. Go ahead and select the language then proceed to step 3.
    3) Once the next screen appears move the cursor up to the menu bar area and pull down the Utilities menu. Select the 'Terminal' application. Once the Terminal application launches try typing the various keys on the keyboard and check to see if the correct characters are displayed. Please let us know if you detect any errors. If there are no errors then you should be able to quit the Terminal application and proceed with reintstalling the OS.

  • Selection screen flow logic change not taking affect. Please help!

    Hi
       When I am trying to change the selection scren flow logic I get the following message:
    Selection screen: Report generation makes screen changes ineffective.
    Whatever I am changing is not taking affect in runtime.
    Even though I have activated the changed code for the screen
    What shall I do resolve this?
    Thanks
    Gopal

    You should not be changing the screen flow logic of a standard selection screen 1000.  It will always be regenerated.  In order to modify the standard selection screen, you can do this in the AT SELECTION-SCREEN output event and loop at screen and change the attributes.
    Loop at screen.
      if screen-name = 'P_CHECK'.
        screen-input = '0'.
        modify screen.
      endif.
    endloop.
    Regards,
    Rich Heilman

  • Weird sound from x201 keyboard

    recently i've found a weird problem with my x201 keyboard. when i press down on the area where the escape key is or around the area where the volume controls are, it will make a plasticy click sound.the sound happens as soon as i let my finger off that part of the keyboard. sometimes when i press that area and let go it takes a while for that part of the keyboard to bounce back up and make the sound. so it sounds like that area of the keyboard stays in place for a while sometimes before it jumps back to the natural position. no i've never spiilled anything on the keyboard. i'm not putting a lot of pressure on that area either. it could happen if i just tap that area of the keyboard. and i've taken the keyboard off but couldn't see anything that could make the sound. any idea how to fix this? is this a problem with the keyboard or the laptop bezel?
    also will lenovo just ship me a new keyboard for free if i ask? what number or email address would i have to contact?

    Hi,
    Yes, they will ship you new one if you share your keyboard issue with them. Phone number can be looked up from this link:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=migr-4hwse3
    Hope this helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • L_s_range-low not taking leading zeros

    Getting a value of '01111' from a source.
    Want to add the leading zeros of '00001' to '01111' to become '0000101111' and assign that to l_s_range-low.
    Tried CONVERSION_ALPHA EXIT_INPUT but there are too many zeros added.
    Tried translate, shift , and type N, but not get the leading zeros to populated onto the selection criteria screen for the field.
    Trying to use the source value to convert it to a profit center with leading zeros.
    Regular ABAP seems to add the leading zeros when WRITE, but l_s_range-low is not taking the leading zeros and displaying it on the selection criteria screen.
    How to populate leading zeros values for l_s_range-low?

    VAL001 = '00001'
    VAL999 = '99999'
    LOOP AT itab1.
           VALUE1 = itab1-field.    -
    > field has '01234' always start with a zero.
           CONCATENATE  VAL001 VALUE1 INTO VALUE3.
            CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
              EXPORTING
                INPUT         = VALUE3
             IMPORTING
              OUTPUT        = VALUE3               .
           L_S_RANGE-LOW = VALUE3.
           CONCATENATE VAL999 VALUE1 INTO L_S_RANGE-HIGH .
           L_S_RANGE-SIGN = 'I'.
           L_S_RANGE-OPT  = 'BT'.
           APPEND l_s_range TO e_t_range.
        ENDLOOP.
    Created a variable for 0PROFIT_CTR.
    Profit Center is CHAR 10.
    when running the query, Selection criteria screen has omitted 0 and only display 1234 for the low.

  • Ultra 60 keyboard not detected

    Hello, I have an Ultra 60, 2X450MHz, 2GB RAM, 2X 50GB HDD, Creator 3D. I recently used the Solaris 10 CD-ROM to format>analyze>purge the hard disks, which went without errors. Now I connect a Sun Type 5c KB/Type 5 mouse, and one of the following occurs at boot seemingly at random:
    1. OBP message above banner "cannot detect keyboard layout fe (or c2 or co" and "using USA keyboard layout" followed by banner with "Keyboard present" therein; however when keys are pressed, only repeating 3's or "Keyboard error" appears after OK prompt. Or...
    2. No message above banner, but banner displays no keyboard present; same 3's repeating or error upon keypresses. Or...
    3. No banner at all, but message "keyboard not detected, sending input/output to ttya".
    I am using this keyboard right now on an Ultra 5. I have tried another Type 5c and a Type 6 on the Ultra 60 with the same results. My questions:
    1. Is this an OBP fault? How to serial console to this machine without it having a hostname in order to update the PROM?
    2. Is this a mainboard fault, like in the keyboard jack or something? Do I need a new mainboard?
    This happened overnight. The only thing I can think of that I did was that I used a Belkin adapter (with PS/2 ports and VGA port) to purge the hard disks, then plugged in a Sun KB/mouse along with a display adapter as soon as I acquired them. I am lost! Any thoughts or solutions would be appreciated. Thanks!

    See my thread here
    PS2 keyboard/mouse causes random shutdowns or doesnt work
    In short there is no known solution, it is an manufacturing fault, usually swapping to USB and enabling USB keyboard and mouse in the BIOS will help.

  • MacBook Pro Retina Keyboard not responding after Sleep

    Hi,
    I am having an issue that I have noticed in Mountain Lion. When I put my MBPr to sleep, either via Apple->Sleep or by Closing the lid (maybe sleep for 5-10 min or more); the Keyboard will not respond at all and cannot enter the Password to get back in.
    I have tried to remove the lock screen in order to avoid that but the same things happens for any App that I try to use and requires keyboard. The Apple Magic Mouse works fine, and I have no external keyboard connected.
    I have taken it to the Store and the ML was re-installed...still same issue
    Anyone had this happen and able to determine the cause?

    Just some more info regarding this:
    Pressing a key on the usb key board will bring up the log in screen and the mouse works (plugged into the keyboard) but text input from the keyboard doesn't work.

  • KEYBOARD NOT WORKING LEOPARD UPDATE POSSIBLE CODING ERROR??

    having read through all threads concerning this issue of internal MBP keyboards not working after installing leopard, and comparing to my own experience, it seems that everyone started having this problem soon after they must have downloaded the 1st software update to leopard.
    my MBP's keyboard currently does not work. How am I typing you ask?
    With the new apple USB aluminum keyboard. My boyfriend has it for his mac mini.
    Because all these keyboard problems are new and happening to everyone now, we have to assume this is related to the leopard update. They JUST released the aluminum keyboard around the same time they released leopard, so they probably had bugs with the usb aluminum keyboard and had to make some kind of change in the code with how leopard relates with keyboard input. so, it's most likely a coding error and we are at the mercy of apple for a freaking software update ASAP. Don't erase and install - because that will just take you back before the update, and then after you update your software again, it will happen again and your keyboard will crash. I updated my software yesterday and almost immediately started having this issue. my MBP is a week old and i had no issues before this with the keyboard until the update.
    The best thing we can do at this point is FLOOD APPLE WITH PHONE CALLS. We paid upwards of $3000 for a computer - holding down a key and messing with text edit is NOT acceptable.
    These are NOT solutions. Every time your keyboard stops working, and holds you up from doing your work, CALL THEM.
    That's what we think is happening...maybe something more severe is happening and we're wrong. but, hopefully, this is all it is and they will FIX IT as soon as possible because it's really annoying.

    Is anyone else running vmware or parallels?
    I had both installed at different times and realized that for whatever reason the kernel extensions for both were installed on my machine. I downloaded both from their respective website and ran the full uninstall.
    As of this moment my (then-persistent) keyboard issues are gone. I am not positive this was the solution as I just might not have had the problem yet (as they tended to be very sporadic), but it might be a good test if anyone else is using either of those software suites.
    If you open a terminal window and type kextstat, you will be shown a full report of kernel extensions that exist on your machine. Towards the bottom of the list parallels and/or vmware will be listed if they are installed.
    Hope this helps. Though I am still wondering if Leopard is the problem.

Maybe you are looking for

  • To Transfer data from internal table to a table control

    Hi All, I have selected some data to be displayed on a screen into an internal table ...............my problem is how to transfer the data from the internal table to this table control so that when screen is displayed the data is also displayed. Rega

  • How can I correct a photo that was printed in reverse

    I have a very old photo that was printed from either a glass plate or very early negative. Either way it was printed with the negative upside down so the photo is reversed. How can I correct that?

  • Need to DELETE and LOAD data of the Last month to

    Hi Experts, I need to delete the last month data from cube because One material is not updated with a Required value. We have made some changes in Update routine for a Value. The Same change must be reflected from last month of data , So I need to de

  • Illustrator CC crash aléatoirement ?

    Bonjour, Illstrator CC crash aléatoirement, 2 fois aujourd'hui. Je n'étais en train de faire aucune opération spéciale. Voici les logs d'erreur si ça peut aider : Nom de l'application défaillante Illustrator.exe, version : 17.0.0.260, horodatage : 0x

  • Difference between charger a1374 and A1244?

    My all-new MBA has A1374 as charger. Can I buy any A1244 as a compatible one? I can't find any charger that states it will charge my 2011 MBA.