X220t witrh swivel screen- How to add a webcam?

I have an X220T with swivel screen. I would like to install a webcam but after much research, I cannot find any data on how to do that with this type of screen. Is it even possible? I have looked at the instructions for taking the x220 apart, but it is not the same as there are no hinges on the sides, just a swivel hinge. Also, which exact part do I need to purchase? Cable?

You can buy the camera from Lenovo, but I don't think you can get the cover separately. (There is a stuck-on cover on the LCD bezel that needs a hole for the camera to "see" out.) I suggest this:
http://www.ebay.com/itm/New-Orig-IBM-Lenovo-X220-X220i-X220-tablet-Integrated-camera-04W1364-0A66263...

Similar Messages

Bella Home screen - how to add link to webpage?

Is not possible to add a shortcut to a website, only to the application. Can it be done? It was a very useful feature.

I also miss the ability to put bookmarks on the homescreens. I had 6 different ones in Anna and they worked fine except you couldn't label them.

How to add rows in table control for data recording BDC?

hello,
pl tell me the way to upload data through BDC in table control of screen .
how to add fields inrecording of table control?
Please give some code in this regard.
I am generous in giving points..pl help!

Hi,
While doing code under recording first you need to do the recording with sample data under a particular transaction like T-code XK01 (Vendor creation).
Take an example of create vendor using T-code XK01:
Go to t-code 'SHDB' under make recording for XK01 with sample data and once if you complete the recording means after vendor creation check the source code bye by pressing the button 'Program', it shows the total coding for recording of what you entered the test data.
Then you will create one program and copy that source code of recording into your program, and now you have to remove the values at perform statement and give the internal table field name.
Like that you can develop your own code along with your validations.
my best suggestion is dont see the example code of recording method because any one for standard t-code should get the code from recording with sample data, so first tryout with your own recording method and you can understand the code step by step.
With these I hope you will get some idea of recoding method.
Let me know for further doubts.
Regards,
Vijay.

PLz Help me its urgent, how to add new field in mm01 basic data screen

Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.

Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee.

How to Add a parameter of currency exchange rate in the selection screen

Dear Friends,
How to Add a parameter of currency exchange rate in the selection screen with format (9999.99999). wich field i need to take.
Thanks,
Sridhar

TCURR-UKURS.
~Suresh

How to add a custom button in WD screen to call a workflow in siebel?

Hi All,
We have a requirement to have a custom button at the summary screen(after the rule execution) "Create Opportunity", on clicking on it a new opportunity record should be created in Siebel. As we know the "Save" link calls "PolicyAutomationSaveSession" inbound web service method and saves the information in session table and we can modify the PreSession and PostSession workflows. But we are not sure how it calls the service method and where is the mapping defined.
Can you please help me on how to add a custom button and how to invoke a workflow in siebel side to implement this requirement?
Also is there any document which can help me to add a custom button in screen and to add the code behind the button?
Thanks in advance!!
Regards,
Subhradeep

Subhradeep,
Closing a Web Determinations window is essentially the same as closing any HTML window. It involves javascript, which you would have to add to the Web Determinations templates.
Essentially the javascript command to close a window is {{window.close}} or {{top.close}}
For timing, you might be able to use the setTimeout function of Javascript (see: http://www.w3schools.com/jsref/met_win_settimeout.asp)
At the risk of exposing exactly how bad my javascript skills are, I have attached a super-simple html fragment, a page that closes itself after 3 seconds. It may help you get started in the right direction. In general closing a window is a fairly dubious activity and is often not permitted by certain browsers. This html page at least works in Internet Explorer.
<html>
     <head>
     <script language="JavaScript">
          setTimeout(closeMe, 3000);
          function closeMe() {
               alert("This window will close");
               top.close();
     </script>
     </head>
     <body><B>This window will close in three seconds</B></body>
</html>
{code}

How to add a Custom field in the Standard SAP Sales Order main screen

Dear Experts,
We have a requirement of adding a Custom field in the Sales Order screen. I know how to add the Customer field in the Additional data B tab of the Sales Order Header Screen as that is the screen user exit provided by SAP. Can someone tell me how to add the Custom field in the Sales Order main screen. Program Name - SAPMV45A and Screen Number - 4001. What is all I need to take care.
Thanks,
SNK.

I have not added the Custom filed in the main screen and added in the Additional data B screen. So closing the message.

How to add fields in fp03 Extenal Collection agency screen

Hi All,
As per our requirement, I need to add a check box and a date field in FP03 transaction - Extenal collection agency screen. I couldn't find any screen exit,BADI. Any one know how to add these two fields on the screen and save the values in DFKKCOLL and DFKKCOLLH table.
Your answer is highly appreciated.

Hello,
I do not know the either user exit or BAdi for FP03. However I can suggest you a work around.
You can add an addl tabstrip in FPE2/FPE2M. This is possible by adding an addl field say 'ZZ' in tables DFKKOP/DFKKCOLL/DFKKCOLLH.
<also pls look into OSS Note 851023>
So when ever an item is submitted to collection agency, this field should be updated.
Hope this helps
Rgds
Rajendra

How to add a search help for a field in Screen Personas?

I just started learning to use a Screen Personas, and I want to know how to add a search help for a field.
I found a property in the help document named "IsLookupSupported". Is it the key? But I saw it was gray in the field I created, and its value is "false". I could not change it.

Hi, Tamas,
I found the reason. The function Z_WEBRFC_READ_DATA_SH had a string concatenation error.
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
The correct code is like:
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},{"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
Another question is, I can't get any words in Chinese from WebRFC. It returns error when I try it. How can I configure it?
Xin

How to add one column for entry in the TLB screen?

Hi all,
Does anybody know how to add a customised column for free text in the TLB header screen? The reason is user needs to add ship or container no. This info will be later on interfaced via CIF exit to R/3.
I think many of you have the same requirement.
Thanks heaps!

Thanks Digambar,
Can you help to work out more detail on how to customize the code in the TLB screen?
Are you thinking of adding one field in the table and making the ALV grid control editable? If you have any reference doc/link to do it, it would great!
Cheers,

How to add order reason code field to selection screen of VL10

Hi,
How to add Order reason code(vbak-augru) to the selection screen of VL10.
1. How to find enhancement for it?
2.I want to display Order reason code field on output list also?
3.Pls give steps i am new to enhancements
thanking u advance...
surya

Hi,
there is no user exit available for this report program, one alternative is copy the program associated with this standard program i.e. RVV50R10C to a Z program and modify it as per your requirement or if you want to modify the standard program you need access key.
Regards,
Raghavendra

How to add a field to the selection screen and when the user enters ...

hi all,
can any one plesase send the code of how to add a field to seletiion screen and when the user enters in the field , it should be store in the database table , the table is MKPF and the field is BKTXT. Thanks.

Hi Kripa,
   If u r using PNP ldb then the screen u will get is the screen for that ldb and if u want to add some more fields then u define using selection-screen..as follows
SELECTION-SCREEN BEGIN OF BLOCK mysel WITH FRAME TITLE text-111.
PARAMETERS: n_in_en RADIOBUTTON GROUP g1,
            q_ev RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK mysel.
SELECTION-SCREEN BEGIN OF BLOCK mysel1 WITH FRAME TITLE text-222.
PARAMETERS: r_date TYPE sy-datum DEFAULT sy-datum.
SELECTION-SCREEN END OF BLOCK mysel1.
SELECTION-SCREEN BEGIN OF BLOCK mysel2 WITH FRAME TITLE text-333.
PARAMETERS:f_ver(3) TYPE c DEFAULT 1,
           c_no(10) TYPE c DEFAULT '9D0161',
           u_id(15) TYPE c,
           password(15) TYPE c,
           r_email(30) TYPE c DEFAULT PARAMETERS: s_not TYPE c AS CHECKBOX.
PARAMETERS:t_run TYPE c AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK mysel2.
SELECTION-SCREEN BEGIN OF BLOCK mysel3 WITH FRAME TITLE text-444.
SELECTION-SCREEN BEGIN OF BLOCK mysel4 WITH FRAME TITLE text-555.
PARAMETERS: p_ser RADIOBUTTON GROUP g2,
a_ser RADIOBUTTON GROUP g2.
SELECTION-SCREEN END OF BLOCK mysel4.
SELECTION-SCREEN BEGIN OF BLOCK mysel5 WITH FRAME TITLE text-666.
PARAMETERS:p_path TYPE string.
SELECTION-SCREEN END OF BLOCK mysel5.
SELECTION-SCREEN END OF BLOCK mysel3.
u will get this additional screen after the screen of ldb.
I hope this will help u..
Thanks & Regards
Ashu Singh.

How to add new tab screen in transaction BP

Hi,
   Please let me know How to add new tab screen in transaction ukm_BP. Is there any SPRO configuration needed for this?
Thanks,
Debi.

Hi,
You may also try the exits available with the MIGO transaction. To find exits you can use the fillowing code by giving tranasaction code as input.
REPORT zrmexitfinder                               .
TABLES: modsap, modact, tstc.
PARAMETERS: input1 LIKE tstc-tcode DEFAULT ' ',
            input2 LIKE modsap-typ DEFAULT ' '.
DATA: search1(6),
      search2(3),
      search3 LIKE modsap-member.
DATA : first_row VALUE 'Y'.
CONCATENATE: '%' input1 '%' INTO search1,
'%' input2 INTO search2.
SELECT * FROM tstc WHERE tcode LIKE search1.
first_row = 'Y'.
CHECK tstc-pgmna NE space.
CONCATENATE '%' tstc-pgmna '%' INTO search3.
SELECT * FROM modsap WHERE typ LIKE search2
AND member LIKE search3.
    SELECT SINGLE * FROM modact WHERE member = modsap-name.
    IF first_row EQ 'Y'.
      WRITE: /0 tstc-tcode, 6 tstc-pgmna, 16 modsap-name, 32 modsap-typ,
             45 modsap-member, 70 modact-name.
      first_row = 'N'.
    ELSE.
      WRITE: /16 modsap-name, 32 modsap-typ, 45 modsap-member, 70 modact-name.
    ENDIF.
    CLEAR : modsap, modact.
ENDSELECT.
IF sy-subrc NE 0.
    WRITE : /0 tstc-tcode, 6 tstc-pgmna, 30 'No exits found'.
ENDIF.
CLEAR tstc.
ENDSELECT.
END-OF-SELECTION.
CLEAR: search1, search2, search3.
Regards,
Renjith Michael.

How to add Material type(MTART) field on Selection screen of MB5B transaction code.

Hi All,
    Please let me know how to add material type field on selection screen of MB5B transaction
For that i made copy ZMB5B_COPY of original report RM07MLBD.
Thanks in adv .
Samadhan

Hi,
Once you copied the standard report to Z report, you can MTART in selection screen like below.
and in order to inlcude the same in programming logic, we have three option.
1) Check all related select queries, and include MTART in SELECT query using inner join with MARA.
2) In START-OF-SELECTION event fill MATNR as shown below.
3) If user entered any value in MTART, then before displaying the report just check material type of each material in the final internal table(which is used to display report) delete enteries from internal table accordingly.
START-OF-SELECTION.
IF MTART[] IS NOT INITIAL AND MATNR[] IS INITIAL.
    SELECT MATNR FROM MARA INTO MATNR-LOW WHERE MTART IN MTART.
      MATNR-OPTION = 'EQ'.
      MATNR-SIGN = 'I'.
      APPEND MATNR.
      CLEAR MATNR.
    ENDSELECT.
ENDIF.
The above option has one limitation: The selection screen variables has some restriction, please read the below thread.
Facing problem in select statement dump DBIF_RSQL_INVALID_RSQL CX_SY_OPEN_S
Getting Dump in the select query has more than 2000 entries
Hope this will work for you .
regards,
Rajesh Sadula.

How to add push buttons in out put screen of ALV

Hai,
How to add push buttons in out put screen of ALV (tool bar) with out using classes or methods .I want to know using normal ALV .
Thanks in advance .
kiran

Hi Kiran,
Here is the sample code.If you are using reuse_alv_grid_display, no need to write code in PBO.
Just double click the 'TEST' which is written in code.Then create a GUI Status.In Application toolbar,type the name of the button you want(say BUTTON).Then double click that name.Then enter the ICON name and function text.Activate it.This itself will work.If you want all the functionalities,then try to do as Vinod told.
TYPE-POOLS: slis.
DATA: i_qmel LIKE qmel OCCURS 0.
data v_repid type repid.
SELECT * FROM qmel INTO TABLE i_qmel.
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = v_repid
   I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
   I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
   i_structure_name                  = 'QMEL'
TABLES
    t_outtab                          = i_qmel
EXCEPTIONS
    program_error                     = 1
    OTHERS                            = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status '<b>TEST</b>'.
endform.
FORM user_command USING ucomm LIKE sy-ucomm
                         selfield TYPE slis_selfield.
data lv_ucomm type sy-ucomm.
lv_ucomm
= sy-ucomm.
CASE lv_ucomm.
    WHEN 'BUTTON'.                              "Double Click line Item
      call transaction 'MM01'.
endcase.
endform.

X220t witrh swivel screen- How to add a webcam?

Similar Messages

Maybe you are looking for