Xcode target names only 'release' and 'debug'
Hi,
We like to create more build targets in our project, at the moment we have the standard 'release' and 'debug'. For a new version we need targets like 'release 4.1' and 'release 5.0' now. I duplicated the target entry, but if I try to build a target with a name different from 'debug' or 'release', I got an error: "file not fount: @executable_path/WidgetBinLib.dylib". If I change the target name to 'release' or 'debug' it works.
Any idea, how we can use the other target names? Any settings we must change?
thanks
Klaus
I think is something wrong with .fr.rsrc/.fr files of duplicated target, Make sure the new target doesn't have an included from source target.
HTH,
-Kamran
Similar Messages
-
[LInux]
I noticed that when I first start to create a project in Eclipse that it shows a small dialog box with to options checked, release & debug, and I make sure they are both checked. But when I would do a build it would do both executables debug (with debugging symbols) and release (without debugging symbols). I had to find a second options and I don't remember if it was in Properties or Preferences because I can't seem to find that option again.
So what's the difference between the dialog box that shows up with both debug and release checked when you first start a project and the option that I found in properties or preferences for building both?
Also, I can't find that option again in properties or preferences and also for whatever reason the dialog box with debug and release options has stopped coming up when I create a project. Any ideas? Thanks.
One last thing. Is there a way to keep a group of projects under one tree in the Project Explorer? When I'm going through one, or several programming books at a time I don't want to stack 200 projects on top of each other in the project explorer. If I'm going through a particular programming book I'd like to keep all of it's projects in their own tree. Thanks again.Garrett Gaston wrote on Sat, 08 August 2015 12:27[LInux]
I noticed that when I first start to create a project in Eclipse that it shows a small dialog box with to options checked, release & debug, and I make sure they are both checked. But when I would do a build it would do both executables debug (with debugging symbols) and release (without debugging symbols). I had to find a second options and I don't remember if it was in Properties or Preferences because I can't seem to find that option again.
So what's the difference between the dialog box that shows up with both debug and release checked when you first start a project and the option that I found in properties or preferences for building both?
Also, I can't find that option again in properties or preferences and also for whatever reason the dialog box with debug and release options has stopped coming up when I create a project. Any ideas? Thanks.
When you create a new C++ project for an executable or a library, it always give you the option to edit the build configurations on the 2nd or 3rd window of the wizard.
If you don't set it, you don't enable that specific configuation and it won't be built.
To build only a single configuration at time, you should firstly set it through Project -> Build configurations -> Set active, and afterwards click on Projects -> Build project.
I suspect the behaviour you are noticing occurs when you perform "Build all".
Once a project is created, you can edit the configurations from Project properties -> C++ Build -> Manage configurations, it is a button on the right of the current configuration being selected.
Quote:One last thing. Is there a way to keep a group of projects under one tree in the Project Explorer? When I'm going through one, or several programming books at a time I don't want to stack 200 projects on top of each other in the project explorer. If I'm going through a particular programming book I'd like to keep all of it's projects in their own tree. Thanks again.
As you've already noticed, one way would be to organise them on working sets. This is what I am currently using right now, and personally I'm finding quite confusing to handle.
However I've seen several people that just create a new workspace to organise a different set of related projects. You can switch a workspace from File -> Switch to workspace. Then if you want to check two projects in two different workspaces, you need to have two separate instances of Eclipse running, as far as I've understood. -
Difference for method stack size in release and debug builds
Hi,
I have a question regarding the method stack size. Running my project in the debug version works fine. Running the same project as release causes a StackOverflowError (60 entries). Is there any difference in the allowed stack size?
If I split the method (in which the error occurs) into two separate methods and call them sequentially, this works in the release build as well.
I am using Flex SDK 3.4. This is reproducable on Win and Mac.
Cheers
PhilippHi,
I have a question regarding the method stack size. Running my project in the debug version works fine. Running the same project as release causes a StackOverflowError (60 entries). Is there any difference in the allowed stack size?
If I split the method (in which the error occurs) into two separate methods and call them sequentially, this works in the release build as well.
I am using Flex SDK 3.4. This is reproducable on Win and Mac.
Cheers
Philipp -
HT202159 There is no resume next to the app name, only 'waiting' and paused.
I am trying to download Maverics, I had to pause it for something. Now when I click on it it still says 'paused'. I tried going back to the online Apple store and clicking 'purchased' and then clicking resume, but the word 'resume' is not next to this download, only the unclickable word 'waiting'. what do I do
MaryReread the instructions. You cannot hide purchases on the iPad itself if you are running iOS 6 or higher. You have to hide the purchases in iTunes on your computer - not on the iPad.
iTunes Store: Hiding and unhiding purchases - Support - Apple -
Release vs Debug: Bad Memory Access
Hello everyone.
For a school assignment I have to write a program that sorts bottles (inputed by the user) into three bins, and state the minimum amount of moves it takes. I've completed the program, that's not really the problem.
There is a drop down menu up on the top left, and it gives me the option between 'Release' and 'Debug' (under Active Configuration). Now I don't quite understand the difference, but expected for the final copy it should be compiles with it set to Release. But that's just an assumption.
The problem is, or maybe this is just a question, when I set it to Debug and build my program, it runs great. If I change this option to Release and run the program I get "EXCBADACCESS" and the program fails.
My main worry is this might indicate a potential problem with compatibility on other platforms (maybe). I've compiled the program in Terminal with GCC and it works fine there as well. I will post my code below if it helps any. My hope is this is either a bug in xcode, or simply nothing to worry about.
I've underlined the area XCode highlights when the error occurs. Thank you.
#include <stdio.h>
#include <stdlib.h>
const char bottle_colour[][6]={"red","white","blue"};
int main()
int i,low,move[6],bottles[3][3];// bottles[bin][colour]
for (i=0;i<3;i++)
printf("Please enter the amount of %s bottles in each bin with a space inbetween each amount\n",bottle_colour);
scanf("%i%i%i",&bottles[0],&bottles[1],&bottles[2]);
printf("\n");
move[3] += bottles[1][0] + bottles[2][0];// Moving all red bottles to bin 1
move[3] += bottles[0][1] + bottles[2][1];// Moving all white bottles to bin 2
move[3] += bottles[0][2] + bottles[1][2];// Moving all blue bottles to bin 3
move[2] += bottles[1][0] + bottles[2][0];// Moving all red bottles to bin 1
move[2] += bottles[0][1] + bottles[1][1];// Moving all white bottles to bin 3
move[2] += bottles[0][2] + bottles[2][2];// Moving all blue bottles to bin 2
move[5] += bottles[0][0] + bottles[2][0];// Moving all red bottles to bin 2
move[5] += bottles[1][1] + bottles[2][1];// Moving all white bottles to bin 1
move[5] += bottles[0][2] + bottles[1][2];// Moving all blue bottles to bin 3
move[4] += bottles[0][0] + bottles[2][0];// Moving all red bottles to bin 2
move[4] += bottles[0][1] + bottles[1][1];// Moving all white bottles to bin 3
move[4] += bottles[1][2] + bottles[2][2];// Moving all blue bottles to bin 1
move[1] += bottles[0][0] + bottles[1][0];// Moving all red bottles to bin 3
move[1] += bottles[1][1] + bottles[2][1];// Moving all white bottles to bin 1
move[1] += bottles[0][2] + bottles[2][2];// Moving all blue bottles to bin 2
move[0] += bottles[0][0] + bottles[1][0];// Moving all red bottles to bin 3
move[0] += bottles[0][1] + bottles[2][1];// Moving all white bottles to bin 2
move[0] += bottles[1][2] + bottles[2][2];// Moving all blue bottles to bin 1
for (i=0;i<5;i++)
_if (move[i+1] < move && move[i+1] < move[low])_
low = i + 1;
printf("\nThe lowest amount of moves it would take is %i.",move[low]);Well, welcome to programming.
The code as printed obviously isn't quite right due to formatting problems. There's a way to format it so it is displayed correctly but I don't know it off hand.
If you use look at the build warnings you'll get a pretty good idea what is going on. In general there should be few or zero warnings in the build process. They're there for a reason. C provides a lot of rope.
A few issues right away from the command line compiler:
s.c:12: warning: format ‘%s’ expects type ‘char *’, but argument 2 has type ‘const char (*)[6]’
s.c:13: warning: format ‘%i’ expects type ‘int *’, but argument 2 has type ‘int (*)[3]’
s.c:13: warning: format ‘%i’ expects type ‘int *’, but argument 3 has type ‘int (*)[3]’
s.c:13: warning: format ‘%i’ expects type ‘int *’, but argument 4 has type ‘int (*)[3]’
I presume the following code
if (movei+1 < move && movei+1 < movelow)
low = i + 1;
is
if (move[i+1] < move && move[i+1] < move[low])
low = i + 1;
If so, I see the following warning:
s.c:43: warning: comparison between pointer and integer
Trust me, the issue is not portability at all nor a bug in Xcode. There are significant bugs in this code that just happen to compile.
For instance, in line 12, the %s takes a pointer to a string yet a pointer to an array of strings has been provided.
In line 13, the scanf %i operator requires a pointer to an integer yet a pointer to an array of pointers as been provided. You should have passed something such as &bottles[x][y] for each of those arguments.
If you actually have 'move && move[i+1]' in the code, the code is comparing an address to an integer and I'm sure that's not intended.
Lastly, 'low' is not initialized (those are difficult to find and the compiler does not warn of them even when using the -Wall flag). Probably should be set to zero. Different compilers and platforms vary on guarantees of a zero value.
Since this is a project in school I will stop at this (and there are more issues in the code than I have stated).
It'll all come in time. Good luck to you. -
Is there any actual difference between Release, Debug and Debug Local configurations in SSRS project?
For example in VC++ Debug build would have all optimization turned off (by default) and included additional Debug information in executable.
Since there is no executable produced for SSRS - is there any actual difference between configurations? Or are they only for the purpose of deploying to different destination servers?Hi JoeSchmoe115,
The Project Configuration and Configuration Manager is a feature supported by Visual Studio, on which Business Intelligence Development Studio or SQL Server Data Tools is based. We can use Configuration Manager to create and manage sets of project properties
in project configurations. You are right that the project configurations is only for deployment purpose in a Report Server project.
Reference:
http://technet.microsoft.com/en-us/library/ms155802.aspx
Regards,
Mike Yin
TechNet Community Support -
I'm trying to create a new movie. It tells me to name my movie, and the only event choice in the drop down menu is the last movie I made. IMovie Library is greyed out. I'm lost and I'm just starting. Not sure I like the new version. Any help out there?
peggy818 wrote:
… I'm lost and I'm just starting. Not sure I like the new version. …
have a read in the Manual:
http://help.apple.com/imovie/mac/10.0/?lang=en#mov755717b21 -
My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message. How an I get rid of that
Try this...
have a text convo with the person you want to delete. Go to the top contact in the text convo, hit edit contact, and delete that contact.
That resolution came from another thread on this issue, and this did solve to poster's issue. -
My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message. How an I get rid of that
Try this...
have a text convo with the person you want to delete. Go to the top contact in the text convo, hit edit contact, and delete that contact.
That resolution came from another thread on this issue, and this did solve to poster's issue. -
an event in one of my libraries no longer has the event icon next to it's name in the browser just the name only. I can't view the clips in the event or import new clips. I've tried deleting the event and nothing. After control clicking the event it shows all the media that has been previously imported. But it does not allow anything to be done to the event including deleting. This showed up at the beginning of a normal import session. This is fortunately the back-up evant.
Did you perhaps mess with the contents of the library in the Finder?
You may try the solution suggested in this thread:
https://discussions.apple.com/message/24915790#24915790 -
A while ago i went to sync music onto my Ipod Touch. Not only did the computer erase my music i had no idea how to get it back I contacted Apple on the phone but the name was american and i found it really hard to understand him. How do i get it back! i bought most of my music on itunes but i just dont have any idea where to go and whjat to do can any help me??
Respond please!Depending upon what country that you are in (music can't be re-downloaded in all countries) then see if you can redownload your past music purchases (those that are still in the store) via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you are not in a country where music can currently be re-downloaded, then have you not got it on your computer and/or on a backup ? If not then you can try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
Photos in my from my iPhone have the same numbering as photos from my digital camera. They all go into iPhoto fine but when I backup to my ext hard drive it will only save one with the name IMG 1002 and I have two separate images both with that name. How do I get them all to save on my ext hard drive and hope do I prevent this numbering overlap in the future? I'm really hoping I don't have to go through and manually rename every single picture. Thanks.
How are you backing up the photos? The best way is to backup the library itself as that will preserve your organizational efforts as well as all metadata like keywords, titles, faces, places, books, etc.
You can use a backup application that does incremental backups. Thus only the first backup is a full one and subsequent backups just copy those files that are new or changed. I use Synk Pro. The lower cost version, Synk, will do the same job. Other similar apps can be found at MacUpdate.com.
OR: upload your camera to a folder on the Desktop. There you can rename the files to something that is more informative than just the file name. I use the date (international format) along with a brief desc: 2007-1-20-adian1stbday-001.jpg. File renaming apps can also be found at MacUpdate.com. Also you can give the folder an informatve name which will become the Event name when you import the folder of photos into iPhoto.
OT -
WARNING: Broker name (stdby) and target name (STDBY.ad.istorage) do not mat
hi,
i am facing the following warning in 11g grid control when verifying data guard configuration.
Initializing
Connected to instance racnode1:racdb1
Starting alert log monitor...
Updating Data Guard link on database homepage...
WARNING: Broker name (racdb) and target name (racdb.ad.istorage_racnode-cluster) do not match.
WARNING: The broker name will be renamed to match the target name.
WARNING: Broker name (stdby) and target name (STDBY.ad.istorage) do not match.
WARNING: The broker name will be renamed to match the target name.
Skipping verification of fast-start failover static services check.
Data Protection Settings:
Protection mode : Maximum Performance
Redo Transport Mode settings:
racdb: ASYNC
stdby: ASYNC
Checking standby redo log files.....not checked due to broker name mismatch. Run verify again.
Checking Data Guard status
racdb : Normal
stdby : Normal
Checking inconsistent properties
Checking agent status
racdb
racnode1.ad.istorage ... OK
racnode2.ad.istorage ... OK
Processing completed.Did you search on MOS to find Cloud Control: "Data Guard Internal Error" raised on Data Guard Performance Page [ID 1484028.1] ?
-
Sql Developer Data Modeler 3.0 EA1: Relationship source and target names
When opening my version 2 model in version 3.0 EA1 the source name and target name of all my 231 relationships are deleted.
Is there a solution for this? I don't want to reenter these 462 labels...
Sincerely,
Marc de OliveiraHi Peter,
When I examine an XML file for a relation converted from version 2.0, the XML elements "nameOnSource" and "nameOnTarget" are missing in the converted 3.0 EA1 versionthey are not loaded during "open" of older design. If you define them they will go into XML file.
Philip -
Need API Name for PIck Release and Ship Confirm for WMS Module
Hi All,
One if my requirement is that Initially I will create Internal Sales Order and send to the other system (legacy) there they do the shipping then they provide the flat file which contains shipping information. Based on the incoming file I will close the order. Here they are using the WMS to process the pick release and ship confirm.
Can any one please help me how to do pick release and ship confirm by using an API or Interface in WMS. If knows please provide the name of the API's and flow.
Thanks,
PrasannaFor external orders we have a solution on WMS_DEVICE_CONFIRMATION_PUB api.
may be you have done pick release using this api in WMS enabled organizations. After pick release
you can use WSH api to do Ship Confirm.
Anatoly.
Maybe you are looking for
-
Is there a way to find out who (what particular individual) has approved a Purchase Order? I know there are different release strategies, but I want to know what individual approved the Purchase Order. Thank you for any help in this matter.
-
Basic questions about digital representation
if i have bitstream where 0's and 1's are represented as below and after representing them on a graph i want to apply a raised cosine filter and make them look ike this soo is there anyway i can do that...please help
-
Exporting to Camera from Canopus ADVC 110
My saga so far: I bought a brand new Canopus ADVC110 Advanced Digital Video Converter for use with iMovie 3.0.3 on my Macintosh G4. I can't understand hardly A WORD of the instruction manual, but with detailed questions and careful coaching from the
-
I'm running a 10.2 instance on Solaris, and need to install DB Control on a Windows box for management. What install disk/download does it come from? It's been about a year since I setup DB Control. I thought it was on the companion CD, no?
-
NO SOUND IN MY IPHONE 5