XCode wont find source code during debug

My XCode project (an exernal target initially generated using GNU autotools, and imported into XCode) won't find the source code during debug.
I'm sure this is a project setup issue, but i can't seem to figure out which setting i need to change.
Any help is appreciated.
Thanks

Hi,
make sure Debug symbols are generated! If you for example choose to debug while the project is set to "Release" mode (Project->Set Active Build Configuration), you will not get your code displayed and instead have to use the asm output of the debugger.
If set to "Debug", XCode switches all necessary gcc... parameters for debugging.
Volker

Similar Messages

Finding Source Codes where a Particular Message Is Used??

Hi All,
Is there a good way to find out the Programs, FM, BAPIs, etc where a particular message number is used?
I am trying to find source codes where the mesage TD 463 is used. I am getting this error by RSNAST00 program. It is used somewhere either in an include or some FM or BAPI called within those includes included in RSNAST00.
I have tried to search for it in RSNAST00 but couldn't find it.
Any idea how I can find the places where this message is used globally or at least in RSNAST00 and it's sub sources.
Any suggestions will be greatly appreciated.
Thanks

hi,
Goto SE91, give ur message class <b>TD</b> and your message no <b>463</b>, click on Display button. Place the cursor on the message no 463 and click on Where used list (CTRLSHIFTF3). A popup opens and click ok.
This gives the list of programs, transactions in which message no is used.
In that list, check for your program RSNAST00. Click display button.
Regards,
Sailaja.

Ask again: Where can I find source code for CPRM algorithm?

Hi, everyone.
Where can I find reference implementation or some sample codes for CPRM(content protection for recordable media) algorithm? Can anyone help?
Information about CPRM can be find here,
http://www.4centity.com/
JAVA version is preferred and C/C++ implementation is also OK.
Thanks in advance,
Geo

Thanks, edsonw buddy!
I only found C2 cipher source code and some other documents dealing with CPRM algorithm. And what I want is total CPRM implementation reference source code (C2 is only a basic module of CPRM algorithm).
So can you provide me some useful information dealing with how to get total CPRM implementation reference source code? Both JAVA and C/C++ will be OK.
Have a wonderful weekend,
George

Cannot find source code for Employee Benefit application

Hello,
I am trying to find the Employee Benefit Sample Application which used to be provided by Oracle at http://otn.oracle.com/sample_code/products/ias/content.html. Unfortunately I couldnât find the source code anywhere, neither by searching through oracle sites, nor through the internet.
Could someone please help me get it, since I just started working on applications based on this model and it is really important for me to have a complete example that works.
Thanks in advance,
Stefanos

Hello,
This sample application used to work on older versions which is no longer supported. This is the reason, it has been removed.
Thanks.

Could not find source code for Storefront application of CRS in ATG 10.0.1

Hi All,
I am trying to find the source code of Storefront application of CRS in ATG 10.0.1. This is needed to try all the multi-site features in the default website first before doing the same on our application. I want to create a similar setup like MotorpriseJSP application on ATG 10.0.1.
Let me know if there are any options to get the source code for storefront app.
Thanks,
Kishore Kumar.

Hi
You can find the source code for the CRS applicaiton under
ATG10.0.1\CommerceReferenceStore\Store\EStore\src
Thanks
GS

EA2: "Unable to Find Source File" when debugging

Hi,
I was remote debugging and hit a breakpoint in a trigger which I hadn't open.
The "Unable to Find Source File" dialog popped up, saying "Unable to find source file for package $Oracle.Trigger.SCHEMA, filename TRIGGER.pls", with SCHEMA being the current schema and TRIGGER the trigger (which never got saved to file BTW).
Additionally, this was pumped in the console (partial post due to limited buffer in Windows):
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThre
ad.java:273)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.
java:183)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:173)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
java.lang.NullPointerException
        at oracle.jdeveloper.java.locator.ProjectClassLocator.<init>(ProjectClas
sLocator.java:104)
        at oracle.jdeveloper.java.locator.JdevClassLocatorFactory.getProjectLoca
tor(JdevClassLocatorFactory.java:101)
        at oracle.jdeveloper.java.provider.ProjectFileProvider$6.run(ProjectFile
Provider.java:347)
        at oracle.ide.model.NodeUtil.runUnderReadLock(NodeUtil.java:150)
        at oracle.jdeveloper.java.provider.ProjectFileProvider.getClassLocator(P
rojectFileProvider.java:364)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getClassExactImpl(Ba
seFileProvider.java:430)
        at oracle.jdeveloper.java.provider.CachedFileProvider.getClassExactImpl(
CachedFileProvider.java:697)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getClassLeftToRight(
BaseFileProvider.java:377)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getClass(BaseFilePro
vider.java:350)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getSourceClass(BaseF
ileProvider.java:753)
        at oracle.jdeveloper.java.JavaModel.getSourceClass(JavaModel.java:364)
        at oracle.jdeveloper.runner.Source.findURLForClassSource(Source.java:626
        at oracle.jdeveloper.runner.Source.findURLForClassSource(Source.java:620
        at oracle.jdeveloper.runner.Source.findSourceFile(Source.java:565)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.findSourceFile(Debuggin
gProcess.java:2680)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.showSourceFile(Debuggin
gProcess.java:2711)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.showSourceIPIcon(Debugg
ingProcess.java:2782)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.debuggeeStopped(Debuggi
ngProcess.java:3093)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.activeProgramStopped(De
buggingProcess.java:3011)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.mav$activeProgramStoppe
d(DebuggingProcess.java:132)
        at oracle.jdevimpl.runner.debug.DebuggingProcess$7.run(DebuggingProcess.
java:1810)
        at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThre
ad.java:273)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.
java:183)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:173)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
java.lang.ClassCastException: oracle.ide.model.UnrecognizedTextNode cannot be ca
st to oracle.jdeveloper.library.JDKNode
        at oracle.jdeveloper.library.JLibraryList.addJDK(JLibraryList.java:211)
        at oracle.jdeveloper.library.JLibraryList.addJDK(JLibraryList.java:231)
        at oracle.jdeveloper.library.JLibraryManager.findOrCreateDefaultJDK(JLib
raryManager.java:718)
        at oracle.jdeveloper.library.JLibraryManager.getDefaultJDK(JLibraryManag
er.java:218)
        at oracle.jdeveloper.model.JProjectLibraries.getJDK(JProjectLibraries.ja
va:121)
        at oracle.jdeveloper.java.locator.ProjectClassLocator.getJDKFor(ProjectC
lassLocator.java:313)
        at oracle.jdeveloper.java.locator.ProjectClassLocator.<init>(ProjectClas
sLocator.java:73)
        at oracle.jdeveloper.java.locator.JdevClassLocatorFactory.getProjectLoca
tor(JdevClassLocatorFactory.java:101)
        at oracle.jdeveloper.java.provider.ProjectFileProvider$6.run(ProjectFile
Provider.java:347)
        at oracle.ide.model.NodeUtil.runUnderReadLock(NodeUtil.java:150)
        at oracle.jdeveloper.java.provider.ProjectFileProvider.getClassLocator(P
rojectFileProvider.java:364)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getClassExactImpl(Ba
seFileProvider.java:430)
        at oracle.jdeveloper.java.provider.CachedFileProvider.getClassExactImpl(
CachedFileProvider.java:697)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getClassLeftToRight(
BaseFileProvider.java:377)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getClass(BaseFilePro
vider.java:350)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getSourceClass(BaseF
ileProvider.java:753)
        at oracle.jdeveloper.java.JavaModel.getSourceClass(JavaModel.java:364)
        at oracle.jdeveloper.runner.Source.findURLForClassSource(Source.java:626
        at oracle.jdeveloper.runner.Source.findURLForClassSource(Source.java:620
        at oracle.jdeveloper.runner.Source.findSourceFile(Source.java:565)
        at oracle.jdeveloper.runner.Source.showSourceFile(Source.java:150)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.showSourceFile(Debuggin
gProcess.java:2719)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.showSourceIPIcon(Debugg
ingProcess.java:2782)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.debuggeeStopped(Debuggi
ngProcess.java:3093)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.activeProgramStopped(De
buggingProcess.java:3011)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.mav$activeProgramStoppe
d(DebuggingProcess.java:132)
        at oracle.jdevimpl.runner.debug.DebuggingProcess$7.run(DebuggingProcess.
java:1810)
        at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThre
ad.java:273)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.
java:183)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:173)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
java.lang.NullPointerException
        at oracle.jdeveloper.java.locator.ProjectClassLocator.<init>(ProjectClas
sLocator.java:104)
        at oracle.jdeveloper.java.locator.JdevClassLocatorFactory.getProjectLoca
tor(JdevClassLocatorFactory.java:101)
        at oracle.jdeveloper.java.provider.ProjectFileProvider$6.run(ProjectFile
Provider.java:347)
        at oracle.ide.model.NodeUtil.runUnderReadLock(NodeUtil.java:150)
        at oracle.jdeveloper.java.provider.ProjectFileProvider.getClassLocator(P
rojectFileProvider.java:364)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getClassExactImpl(Ba
seFileProvider.java:430)
        at oracle.jdeveloper.java.provider.CachedFileProvider.getClassExactImpl(
CachedFileProvider.java:697)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getClassLeftToRight(
BaseFileProvider.java:377)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getClass(BaseFilePro
vider.java:350)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getSourceClass(BaseF
ileProvider.java:753)
        at oracle.jdeveloper.java.JavaModel.getSourceClass(JavaModel.java:364)
        at oracle.jdeveloper.runner.Source.findURLForClassSource(Source.java:626
        at oracle.jdeveloper.runner.Source.findURLForClassSource(Source.java:620
        at oracle.jdeveloper.runner.Source.findSourceFile(Source.java:565)
        at oracle.jdeveloper.runner.Source.showSourceFile(Source.java:150)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.showSourceFile(Debuggin
gProcess.java:2719)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.showSourceIPIcon(Debugg
ingProcess.java:2782)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.debuggeeStopped(Debuggi
ngProcess.java:3093)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.activeProgramStopped(De
buggingProcess.java:3011)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.mav$activeProgramStoppe
d(DebuggingProcess.java:132)
        at oracle.jdevimpl.runner.debug.DebuggingProcess$7.run(DebuggingProcess.
java:1810)
        at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThre
ad.java:273)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.
java:183)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:173)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
java.lang.ClassCastException: oracle.ide.model.UnrecognizedTextNode cannot be ca
st to oracle.jdeveloper.library.JDKNode
        at oracle.jdeveloper.library.JLibraryList.findJDK(JLibraryList.java:55)
        at oracle.jdeveloper.library.JLibraryManager.findOrCreateDefaultJDK(JLib
raryManager.java:702)
        at oracle.jdeveloper.library.JLibraryManager.getDefaultJDK(JLibraryManag
er.java:218)
        at oracle.jdeveloper.model.JProjectLibraries.getJDK(JProjectLibraries.ja
va:121)
        at oracle.jdeveloper.java.locator.ProjectClassLocator.getJDKFor(ProjectC
lassLocator.java:313)
        at oracle.jdeveloper.java.locator.ProjectClassLocator.<init>(ProjectClas
sLocator.java:73)
        at oracle.jdeveloper.java.locator.JdevClassLocatorFactory.getProjectLoca
tor(JdevClassLocatorFactory.java:101)
        at oracle.jdeveloper.java.provider.ProjectFileProvider$6.run(ProjectFile
Provider.java:347)
        at oracle.ide.model.NodeUtil.runUnderReadLock(NodeUtil.java:150)
        at oracle.jdeveloper.java.provider.ProjectFileProvider.getClassLocator(P
rojectFileProvider.java:364)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getClassExactImpl(Ba
seFileProvider.java:430)
        at oracle.jdeveloper.java.provider.CachedFileProvider.getClassExactImpl(
CachedFileProvider.java:697)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getClassLeftToRight(
BaseFileProvider.java:377)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getClass(BaseFilePro
vider.java:350)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getSourceClass(BaseF
ileProvider.java:753)
        at oracle.jdeveloper.java.JavaModel.getSourceClass(JavaModel.java:364)
        at oracle.jdeveloper.runner.Source.findURLForClassSource(Source.java:626
        at oracle.jdeveloper.runner.Source.findURLForClassSource(Source.java:620
        at oracle.jdeveloper.runner.Source.showSourceFile(Source.java:171)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.showSourceFile(Debuggin
gProcess.java:2719)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.showSourceIPIcon(Debugg
ingProcess.java:2782)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.debuggeeStopped(Debuggi
ngProcess.java:3093)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.activeProgramStopped(De
buggingProcess.java:3011)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.mav$activeProgramStoppe
d(DebuggingProcess.java:132)
        at oracle.jdevimpl.runner.debug.DebuggingProcess$7.run(DebuggingProcess.
java:1810)
        at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThre
ad.java:273)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.
java:183)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:173)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
java.lang.ClassCastException: oracle.ide.model.UnrecognizedTextNode cannot be ca
st to oracle.jdeveloper.library.JDKNode
        at oracle.jdeveloper.library.JLibraryList.findJDK(JLibraryList.java:55)
        at oracle.jdeveloper.library.JLibraryManager.findOrCreateDefaultJDK(JLib
raryManager.java:702)
        at oracle.jdeveloper.library.JLibraryManager.getDefaultJDK(JLibraryManag
er.java:218)
        at oracle.jdeveloper.model.JProjectLibraries.getJDK(JProjectLibraries.ja
va:121)
        at oracle.jdeveloper.java.locator.ProjectClassLocator.getJDKFor(ProjectC
lassLocator.java:313)
        at oracle.jdeveloper.java.locator.ProjectClassLocator.<init>(ProjectClas
sLocator.java:73)
        at oracle.jdeveloper.java.locator.JdevClassLocatorFactory.getProjectLoca
tor(JdevClassLocatorFactory.java:101)
        at oracle.jdeveloper.java.provider.ProjectFileProvider$6.run(ProjectFile
Provider.java:347)
        at oracle.ide.model.NodeUtil.runUnderReadLock(NodeUtil.java:150)
        at oracle.jdeveloper.java.provider.ProjectFileProvider.getClassLocator(P
rojectFileProvider.java:364)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getClassExactImpl(Ba
seFileProvider.java:430)
        at oracle.jdeveloper.java.provider.CachedFileProvider.getClassExactImpl(
CachedFileProvider.java:697)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getClassLeftToRight(
BaseFileProvider.java:377)
        at oracle.jdeveloper.java.provider.BaseFileProvider.getClass(BaseFilePro
vider.java:350)
        at oracle.jdeveloper.java.JavaModel.getClass(JavaModel.java:317)
        at oracle.jdeveloper.runner.Source.findURLForClassStub(Source.java:642)
        at oracle.jdeveloper.runner.Source.findURLForClassStub(Source.java:636)
        at oracle.jdeveloper.runner.Source.findOpenSourceStub(Source.java:661)
        at oracle.jdeveloper.runner.Source.showSourceFile(Source.java:202)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.showSourceFile(Debuggin
gProcess.java:2719)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.showSourceIPIcon(Debugg
ingProcess.java:2782)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.debuggeeStopped(Debuggi
ngProcess.java:3093)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.activeProgramStopped(De
buggingProcess.java:3011)
        at oracle.jdevimpl.runner.debug.DebuggingProcess.mav$activeProgramStoppe
d(DebuggingProcess.java:132)
        at oracle.jdevimpl.runner.debug.DebuggingProcess$7.run(DebuggingProcess.
java:1810)
        at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThre
ad.java:273)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.
java:183)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:173)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)Pre-1.5, there were some occasions where the dialog would show, but now it seems it shows whenever the source isn't opened (tried also with a package).
Also pre-1.5, indicating the correct connection to search the source in would put sqldev on the right path again and the source would open correctly, but this doesn't work anymore. Maybe that's because you had to use the second drop-down, and in 1.5 there's only 1, which might be the useless (first) one from pre-1.5.
Besides, judging from the "$Oracle.Trigger.SCHEMA", I'd say sqldev already knows the right schema anyway, and the dialog shouldn't even pop up.
BTW, after opening the source myself, the debugger stepped right in...
Hope you've got enough to go on,
K.
Message was edited by:
-K-

For the previous issues, see [2514] Remote debugger asks for source file.
K.

Finding source codes and page rankings

I have just got the new upgraded Firefox, and I would like to know how to find two things in this browser:
(1) the source codes for any site I visit, and
(2) the page rankings for any site I visit,
Or aren't these available on Firefox?
Roger

@pkgrace, what happens when you try to view source -- no window, blank window??
It's possible to change the source viewer in preferences, so if you have been running Firefox for a while, it might be worth checking that.
(1) Type or paste '''about:config''' in the address bar and press Enter (click the button promising to be careful, and please do be careful!)
(2) In the filter box, type or paste '''view_''' and pause until the preferences are filtered
(3) If '''view_source.editor.external''' appears bold (set to true), double-click it to reset it to false. You're done, you can close about:config now.
If that isn't it, perhaps it's related to an add-on?? Please start a new question and use the feature to include a list of add-ons and customized settings with your question.

Item Finder Source Code

I am looking to create a page with the same functionality as the 'Item Finder" with in the HTMLDB design tool. It is used on pages like region definitions or any where you need to search for existing items with in your application like on page branching where you can set the item and the value. Does any one have the source code for that page or an example of how to search all of the objects with in the application?

<html lang="en-us" xmlns="http://www.w3.org/1999/xhtml" xmlns:htmldb="http://htmldb.oracle.com">
<head>
<script src="/i/javascript/htmldb_html_elements.js" type="text/javascript"></script>
<script src="/i/javascript/htmldb_get.js" type="text/javascript"></script>
<script language="JavaScript" type="text/javascript">

</script>
<link rel="stylesheet" href="/i/css/core.css" type="text/css" />
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<link rel="stylesheet" href="/i/css/htmldb_V2.css" type="text/css" />
<title>Item Finder</title>
</head>
<body style="margin:5px;">
<form action="wwv_flow.accept" method="post" name="wwv_flow" id="wwvFlowForm" >
<input type="hidden" name="p_flow_id" value="4000" id="pFlowId" />
<input type="hidden" name="p_flow_step_id" value="273" id="pFlowStepId" />
<input type="hidden" name="p_instance" value="17091739936304412237" id="pInstance" />
<input type="hidden" name="p_page_submission_id" value="62324" id="pPageSubmissionId" />
<input type="hidden" name="p_request" value="" id="pRequest" /><a name="PAGETOP"></a>
<div id="htmldbMessageHolder"></div>
<div><table summary="" ><tr>
<td nowrap="nowrap" align="right"><label for="F4000_P273_SEARCH"><a class="htmldbGALabel" href="javascript:popupFieldHelp('17538524240255101','17091739936304412237','Close')" tabindex="999">Search</a></label></td>
<td colspan="1" rowspan="1" align="left"><input type="hidden" name="p_arg_names" value="17538524240255101" />
<INPUT TYPE="text" NAME="p_t01" SIZE="15" MAXLENGTH="2000" id="F4000_P273_SEARCH" ></td>
<td nowrap="nowrap" align="right"><label for="F4000_P273_PAGE"><a class="htmldbGALabel" href="javascript:popupFieldHelp('17561408257292898','17091739936304412237','Close')" tabindex="999">Page</a></label></td>
<td nowrap="nowrap" colspan="1" rowspan="1" align="left"><input type="hidden" name="p_arg_names" value="17561408257292898" />
<noscript>
JavaScript not supported
</noscript>
<script language="JavaScript1.1" type="text/javascript">

</script>
<INPUT TYPE="text" NAME="p_t02" SIZE="8" MAXLENGTH="2000" VALUE="800" id="F4000_P273_PAGE" ><IMG SRC="/i/htmldb/icons/view_small.gif" width="18" height="18" alt="List" border="0" align="bottom"></td>
<td nowrap="nowrap" align="right"><label for="F4000_P273_MAX_ROWS"><a class="htmldbGALabel" href="javascript:popupFieldHelp('17569726576299523','17091739936304412237','Close')" tabindex="999">Display</a></label></td>
<td colspan="1" rowspan="1" align="left"><input type="hidden" name="p_arg_names" value="17569726576299523" />
<select name="p_t03" size="1" id="F4000_P273_MAX_ROWS" >
<option value="5">5</option>
<option value="10">10</option>
<option value="15">15</option>
<option value="20">20</option>
<option value="25">25</option>
<option value="50">50</option>
<option value="75">75</option>
<option value="100">100</option>
<option selected="selected" value="500">500</option>
<option value="1000">1000</option>
<option value="5000">5000</option>
</select></td>
<td nowrap="nowrap" align="left"></td>
<td colspan="1" rowspan="1" align="left"><input type="button" onclick="javascript:doSubmit('GO');" value="Go" class="htmldbButton" /></td>
</tr>
</table>
<span class="nodatafound"><span></div>
<div style="text-align:middle;"></div>
<input type="hidden" name="p_md5_checksum" value="" /></form>
<script language="JavaScript1.1" type="text/javascript">
first_field('F4000_P273_SEARCH');
</script>
</body>
</html>

Why does debugger not find source code when compiler output has been directed to the root directory, but the source is in a sub-directory, using Forte for JAVA community edition V3.0

I have configured Forte to put compiler output, i.e. my classes, in the root directory of the project. I now find that the debugger does not find the source code when it is in a sub-directory. However, if I temporarily copy a classes' source code to the root directory the debugger will display it.
To direct compiler output to the root directory I selected Project >Settings>Compiler types, then External Compiler ( which is the default compiler in my case ) and set Target to be the root project directory. This is the only directory it will allow.

This Forum is for Forte 4GL or UDS as its called today. I am not sure if anybody is going to be able to answer your question here. Sorry.
ka

Where to find source code for PDK

for example, source code for AbstractPortalComponent.

Hi Han,
To get the source code of the PDK, first download the pdk either from SDN or portal from java developer> PDK download>jar files and save netweaverlib.zip.
Unzip it and you will find more jar file.
Now if you rename the .jar file to .zip and open you will find .class file. Use a decomplier to get the java classes. For abstract portal component rename and unzip prtapi.jar.
PS: If helpful award points
--Deepak

Where can I find source code for CPRM algorithm?

Hi, everyone.
Where can I find reference implementation or some sample codes for CPRM(content protection for recordable media) algorithm? Can anyone help?
Information about CPRM can be find here,
http://www.4centity.com/
Thanks in advance,
Geo

Thanks, edsonw buddy!
I really take rather a lot of time to search reference implementation in this site but failed to find it out. Can you give me the precise link from which I can download reference implementation and sample vectors?
Best regards,
George

Do you have some useful source codes ???

I find many J2ME programs from various websites.
But I cannot find source code of them.
I want to get them because I'm doing project about J2ME Programming.
If you have some useful sourcecodes such as utility: calendar&time, money, horoscope, calculator
Please post here
or Send me at [email protected]

Hi Golftel,
Its pretty strange that u r working with Java and worried about source codes. There are plenty of codes available around the internet.
However if u want to see the source codes of the applications u have downloaded, do one thing, unzip the jar to ur hdd and the use any decompiler to decompile the class files and make the project using the java files generated there by.
If the files are obfuscated (as hopefully they will be), u have to make bit reverse engineering otherwise use any debugger (I recommend using Netbeans) and debug the application.
Cheers,
SD

How to read the Java source code (in Netbeans)

I use OS X10.5.5, NetBeans 6.1 and JSE 6 on a 64 bit mac.
When I downloaded NB6.1 it had JSE 5 as it's default (and only) java platform. I ran Software Update to get Java 6 from Apple, used the Java Prefrences utitlity to set JSE6 as default. In NB I added the JDK6 platform, registered the JDK6 javadocs and noticed that I also have the option of registering the Java source code.
I have three questions:
1) How do I make JDK6 the default in NetBeans. The JDK5 keeps being default after I did the steps above and I don't see anywhere to change that.
2) How do I read the Java 6 source code? I can see sun provides [source code| http://download.java.net/jdk6/] for their supported platforms. I dont see Apple doing the same for its JDK port. What would I need to do to get to read the java SE6 sources? or is it actually hiding somewhere in the /System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home hierarchy?
3) Where does the JVM look for the binary code to run when I make a call to, say java.util.ArrayList or any other library. In my naivety I would have assumed it would be a .class file somewhere in the java Home folder, but I don't see anything like it.
thanks in advance,
chris

This is taken from the help included with netbeans. In response to question 1.
By default, the IDE uses the version of the Java SE platform (JDK) with which the IDE runs as the default Java platform
for compilation, execution, and debugging. You can view your IDE's JDK version by choosing Help > About and clicking the
Detail tab. The JDK version is listed in the Java field.
You can run the IDE with a different JDK version by starting the IDE with the --jdkhome jdk-home-dir switch on the command line
or in your IDE-HOME/etc/netbeans.conf file. For more information, see IDE Startup Parameters.
In the IDE, you can register multiple Java platforms and attach Javadoc and source code to each platform. For example, if you
want to work with the new features introduced in JDK 5.0, you would either run the IDE on JDK 5.0 or register JDK 5.0 as a
platform and attach the source code and Javadoc to the platform.
In , you can switch the target JDK in the Project Properties dialog box. In , you have to set the target JDK in the Ant script itself,
then specify the source/binary format in the Project Properties dialog box.
To register a new Java platform:
Choose Tools > Java Platforms from the main window.
Click New Platform and select the directory that contains the Java platform. Java platform directories are marked with a
in the file chooser.
Use the Sources and Javadoc tabs to attach Javadoc documentation and source code for debugging to the platform.
Click Close.
To set the default Java platform for a standard project:
Right-click the project's root node in the Projects window and choose Properties.
In the Project Properties dialog box, select the Libraries node in the left pane.
Choose the desired Java platform in the Java Platform combo box.
Switching the target JDK for a standard project does the following:
Offers the new target JDK's classes for code completion.
If available, displays the target JDK's source code and Javadoc documentation.
Uses the target JDK's executables (javac and java) to compile and execute your application.
Compiles your source code against the target JDK's libraries.
If you want to register additional Java platforms with the IDE, you can do so by clicking the Manage Platforms button.
Then click the Add Platform button and navigate to the desired platform.
To set the target Java platform for a free-form project:
In your Ant script, set the target JDK as desired in the javac, java, and javadoc tasks.
Right-click the project's root node in the Projects window and choose Properties.
In the Sources panel, set the level of JDK you want your application to be run on in the Source/Binary Format combo box.
When you access Javadoc or source code for JDK classes, the IDE searches the Java platforms registered in the
Java Platform Manager for a platform with a matching version number. If no matching platform is found, the IDE's default platform is used instead.
See Also
Managing the Classpath
Declaring the Classpath in a Free-Form Project
Stepping Through Your Program
Legal Notices

How to find the code which processes idocs

I am looking for a descriptive short document which would ideally give me comlete picture in IDOC processing, transactions used etc.
E.g
My XI sends idocs to an RFC port of an ERP system. All I know is message type FIDCC2(found it in message mapping and under a partner profile ias imput parameter in transaction we20 for a partner profile with rfc destination of its own rfc destination i.e. PR1CLNT001)
. However in this example I do not find source code which process then this idoc(probably as it is original idoc)?
How to find the code

Jan
You can check the documentation and source code of two reports
RBDAPP01 & RESOUT00 ( https://service.sap.com/sap/support/notes/1333417)
https://service.sap.com/sap/support/notes/527481
Few more IDoc related tcode, we05,bd87 etc...
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-86e1062f1a2d?overridelayout=true
Edited by: Anindya Bose on Aug 6, 2009 7:34 PM

Loocking for source code for waves

Anybody know where I can find source code for a Wave applet!, those how makes water waves/ripples when you move your mouse over it???????????

there are some funny surfing games available in the web:
http://www.wavescape.co.za/bot_bar/games/games.html

XCode wont find source code during debug

Similar Messages

Maybe you are looking for