Xfce4-goodies applets and transparency

Certain applets from the xfce4-goodies group (cpufreq, cpugraph, diskperf) don't seem to respect panel transparency:
Is there any solution to this?

The transparency options are only shown if you have some kind of compositing (like compiz or the built-in xfce one) enabled.
[edit] AFAIK the panel doesn't support pseudo-transparency (anymore?).
Quoting one of the xfce devs at http://forum.xfce.org/viewtopic.php?pid=20223#p20223 :
I don't see the point of fake transpaceny, it involves quite a bit of code for IMHO "just not it". You want a transparent panel: enable compositing.
Last edited by Danylo (2012-03-25 16:30:23)

Similar Messages

IIS, Javascript, Signed Applet and ASP Blank Page Problem

Hi,
I'm having a problem using a Signed Applet in a site that runs in a IIS (Windows Server 2003).
My aspx web page uses the applet to read my smart card and get information from it.
This applet uses an auxiliar dll (stored in a second Signed Jar file) in order to read the information from my smart card.
The way the solution is design:
1) Aspx page is asked from server
2) Internet Explorer recieve the page and asks the server for it content (images, applet, javascripts, etc)
3) After this the JVM runs (console opens)
4) After the Aspx page render fully a javascript register onload fires and call an applet method
5) Applet receive the call and run the logic of the method:
     - reads the smart card;
     - calls Javascript function in order to fill aspx fields with information from smart card
     - calls Javascript function the simulates a click in a botton of aspx page (in order to call server side part sending data readed from smart card to server)
5) The server makes some logic with the information receive and responds to client registering in aspx page a call to another Javascrit function
6) The client received the asnwer from server and runs the Javascript function registered on step 5)
     This Javascript calls another method from applet and runs the following logic:
     - reads more information from smart card;
     - call javascript function in order to fill more fields of aspx page with the information readed
     - calls Javascript function the simulates a click in a botton of aspx page (in order to call server side part sending data readed from smart card to server)
7) The server makes some logic and call another pages with no Applets
8) Client asks for a second page with the same applet and we start with another logic express on steps 1);2);3),4);5) and then 7).
This is all ok, until sometimes the server stop responding correcly for requests regarding this two pages with the Applet.
When this happens the server just responds with a blank page.
     - with fiddler I can seer the request for the aspx page (that uses the applet)
     - but server responds with a blank html page
The JVM doesn't fire.
The IIS log don't show errors.
The eventviewer doesn't show errors.
The problem is solved with an IIS reset or a Application Pool reset.
After a while the problem returns.
This problem occours for other user in another machine, the server just stops responding correcly to request regarding pages with applets, the other pages still continue to work.
If we disable Java Control Panel->Advanced->Java Plug-in->Enable the next-generation Java Plug-in the problem seend to stop, but we can't force all clients to disable this option right?
Or there is a way to force the Applet to run with this option disabled?
As anyone experience similar problem?
Regards,
OF

This is all ok, until sometimes the server stop responding correcly for requests regarding this two pages with the Applet.
When this happens the server just responds with a blank page.
- with fiddler I can seer the request for the aspx page (that uses the applet)
- but server responds with a blank html pageWell, if http requests look identical in case of success and failure (pay attention to cookies, etc) then it has to be something on the server side.
It could be that server gets into this wrong state because of previous requests made by applet but it is hard to tell.
I am not clear how old/new plugin can make a difference unless your applets run in the legacy mode (i.e. you are actually trying to reuse SAME instance of the applet when
it is loaded next time).
I'd start with
1) carefully comparing good/bad sessions
2) checking whether server will serve correct response to another client when it serves "bad" page for current client
3) add debug statements to aspx - it is scripted page, may be some condition is not met and then it returns blank?
4) record all http requests in one session until you get to "error" state and then use any http server testing tool to "replay" this set of requests.
You should be able to get server into the same state without use of applet. Then you can try to tweak set of requests to see what makes a difference.

Signed applets and dialogs

hi all,
question to clarify my understanding of signed applets.
got a bog-standard applet. nothing clever or special.
got myself a bog-standard cert from thawte.
signed the applet and put it on a webserver.
displays the correct security notice on first load. continue and "Always trust this company" etc...
all runs fine.
in the applet init, i've put in
java.awt.AWTPermission perm = new java.awt.AWTPermission("showWindowWithoutWarningBanner");
try {
AccessController.checkPermission(perm);
System.out.println("access allowed?");
} catch (AccessControlException ex) {
ex.printStackTrace();
}open the main frame, and all is good. no banner or access denied exception.
show a popup menu, or tooltip. no banner.
display a dialog. oops, a banner "Java Applet Window" and the bottom section of the dialog is covered with the warning msg.
so i'm confused.
does this mean that this permission does not apply to dialogs? (if so, what?)
even with a cert, this msg cannot be removed? (please tell me no)
wrap and recode all dialog openings with AccessController.doPrivileged? (i dont wanna do this)
or i missed something with the setup.
i've been searching the forums for some info, but seem to be going in circles. editing the policy file on all client comps is not a valid option, unless there is sometrick i dont know about .
tia
-a

hi,
i got the answer from the link
http://www.javaworld.com/javaworld/jw-12-2000/jw-1215-security.html

Comcast lacks integrity and transparency

I have been a customer of Comcast/AT&T Broadband/TCI for over twenty years. Recently I retired and decided that I needed to reduce my expenses. Over the past five years I have seen my cost for phone, internet and cable go from just under $90.00 per month up to over $190.00 per month. I called Comcast to cancel my cable service, since for the most part I am satisfied with the over the air stations I can receive in my area. Even though it was nice to have the additional cable channels, I found I spent less than 10 hours a month watching these premium services. Instead of just terminating the service I requested, the agent went over my options to reduce my bill, he offered to reduce my bill down to $139.00 per month for basically the same services I was getting at over $190.00 per month. I explained that being retired, even $139.00 month was more than I could justify. He told me that for just telephone and internet service I would be paying $108.00 plus taxes/fees. If I were to just get phone it would be about $54 month, and internet alone would be $76 month. I told him I wasn't interested in cable service, he then offered me cable, phone and internet for $89.00 month plus taxes and fees. I found this experience quite frustrating. I found that Comcast lacks integrity, and transparency. If they can offer all three services (albeit it was basic cable, telephone and internet), for $89 plus taxes/fees, why can't I get basic phone and internet service was less than that price point. I am tired of having to play let's make a deal with Comcast. If my local telephone company could offer decent intenet service, I would call it quits with Comcast completely. Even returning the cable boxes to Comcast was a hassle, the only practically place to return equipment is 5 miles away, and 30 minute drive due to the location. It took me 45 minutes to return four cable boxes and four remotes. Not good customer service.

Hi georger811,
Sorry to hear about the poor experience you had. I do see you have already canceled the TV and phone. I also see you were put in full price for Internet. I was able to give you a discount on that for your troubles.
We do try and put the service centers within reasonable distances mileage-wise, however we cannot do much about how long it takes you to get there. Length of time it takes you to get there is not a customer service issue as there are far too many factors playing into how long it takes to get to a location.

Goods Receipt and Serial Numbers

I'm getting the following error "[IGN1.WhsCode][line: 1] , 'This entry already exists in the following tables (ODBC -2035)'" when trying to add a goods receipt document containing a single item that is serial number managed via the DI API. We are running against Business One version 2005A SP01 PL9. The Goods Receipt PO transaction is reporting the same error. The Goods Issue and Delivery transaction appeared to work correctly. The Goods Receipt transaction posted correctly when created in the B1 Client (GUI) application. So it is an issue with the DI API. We are using the SBODemo_US company database but we added a new item and configured it for serial number management. This same code works with B1 2004A. Our application is suppose to work with both versions of B1, so our application is built with version 2004A DI API. Should this work, or do I need to use the 2005A version of the DI API when communicating with a 2005A system? Would this version of the DI API work correctly with a 2004A system?
Thanks,
Jason Eiler

I remembered encountering the same problem working with B1 2004A. For the Goods Receipt and Goods Receipt PO documents, when receiving items that are serial managed I would fill in the InternalSerialNumber data member of the Document Lines Serial Numbers object. The fix was I also had to provide some value for the SystemSerialNumber field. I just always set it to a value of 1. In B1 2005A, this issue must have been resolved, because when I commented out this line of code, the document was added successfully. I don't have to provide a SystemSerialNumber, the system must generate one, as I would expect.

Difference Between Applet and Swing

Difference Between Applet and Swing

The advantages and disadvantages of both applets and Swing are the small fluffy elephants you get inside of every box. They're quite well trained and can skeletonize your neighbors' annoying pets upon command.

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

SAP Standard Report for Good Reciept and Open Goods Reciept .

Dear All Guru's ,
Is there any std. report in which User can see the Actual Goods rcpt and also Open Goods Reciept in that report , What I know that we can see the Goods Rciept thru Trxn = MB51 , but here Open good rcpt
is not possible.
Can any one help to fix this requirement.
Rgds,
sap11

Hi
try MB5S to get an overview of all goods receipts not invoiced.
I would change the standard variant to also add material not only PO.
If you want deliveries not invoiced and you have goods received based IV on you can get an overview per vendor with report from F4 in MIRO (I just learnd recently from here that this is the only suitable report available)
Cheers
Tim

Report to Purchase Orders with Good Receipt and pending for Invioce Receipt

Hello,
I'm looking a report bring me Purchase Orders with Goods Receipt and waiting for Invioce Verificacion (MIRO).
I appreciate any help.
Regards,
Hector

Hi,
ME2N - In selection screen, enter Selection parameters as
WE102 i.e. Goods receipt exists and in output screen put a filter on "Still to be invoiced (qty)" and "Still to be invoiced (val.)" as not equal to zero OR greater than Zero.
OR use RECHNUNG i.e. Open invoices and execute the report
OR Use MB5S - GR/IR Balances

In the second leg STO GR and IR created without doing Goods issue and IV

Hi Guru's
Please can anyone tell us user is created second leg STO without doing good issue and Intercompany invoice, but he has been done GR and IR it is causing problem in MR11 report still outstanding.
i asked user to do GR cancelation or reversal, it is not possible because stocks released to QA. and GR and IR created with ref to PO

Hi,
We can not cancel GRN once it is released form QA or UD is made.

I need help with Applets and Multithreading

[hello all. first time poster. big fan of java.]
now to the important matter: Applets and Threads
=======================================
1) I have an applet with that implements the runnable interface, and has one thread (and a simple animation). If I try to view this applet in the applet viewer with JGrasp, it spits an insane error telling me
"java.security.AccessControlException: access denied (java.lang.RuntimePermission modifyThreadGroup)"
but, if I run the applet through a web browser, by putting it in an html document, it runs correctly, without error
What on earth is wrong, and how do I fix it?!?
2) I want to put 2 threads in my applet?
If I implement the Runnable interface, I can only have one Run() method in my applet, right?
So how do I define behaviour for 2 threads when I only have one run method in which to define the behaviour? Can I use two threads with the runnable interface, or do I have to make objects of my own defined thread classes?
3) I tried to make 2 threads in my applet by creating my own thread classes, and instantiating them in my applet (instead of implementing the runnable interface).
I still get the same insane error as I mentioned in my first point (which I expected), except now, the applet won't work even when viewed through a web browser!!
Please please help me. I am frustrated beyond belief (at what is probably a very simple problem)
I have searched and searched all over and found no answers on this

If I try to view this applet in the applet viewer with JGrasp, it spits an insane error telling me
"java.security.AccessControlException: access denied (java.lang.RuntimePermission modifyThreadGroup)"Don't know anything about JGrasp, but it runs with pretty tight security - thats what this insane error is all about. Use the appletviewer or a browser.
If I implement the Runnable interface, I can only have one Run() method in my applet, right?Correct
So how do I define behaviour for 2 threads when I only have one run method in which to define the behaviour?
Can I use two threads with the runnable interface, or do I have to make objects of my own defined thread classes?You can create two Runnable implementations (classes) in your applet.
example (missing code)
class MyApplet extends Applet {
void doSomething() {
void doSomethingElse() {
void startThreads() {
    Thread t = new Thread(new Runnable() { public void run() { doSomething();}});
    t.start();
    t = new Thread(new Runnable2());
    t.start();
class Runnable2 implements Runnable {
     public void run() {
       doSomethingElse();
}If the above seems confusing, read up on anonymous and inner classes.
3) I tried to make 2 threads in my applet by creating my own thread classesTry not subclassing thread - this causes a security check

Fields For Good Reciept and Issed !

Hi all,
I want the fields for the goods reciept and good issued for getting the stock for a particular material as on to date (which is my selection screen) ...
I have selected the sales data from the VBRK and VBRP tables which is for sales information and now i need to find out the Stock information. My Requirement is to maintain sales stock and to show the Turn Over Ratio ???
Can you tell me the tables and the fields where i will get them ...
I m calculating my Stock as:
Stock (as on date) = Substracted Value (Reciepts - issues ) - current stock.

In MSEG there is field for Sales order number as well as item number from that you can get the Goods issues quantity,similarly in MSEG you also have purchase order number and purchase order item numner from which you can get the goods purchased quantity by passing it to VBAP and EKPO respectively.
Regards
Mohamed Mansoor
Message was edited by:
Mohamed Mansoor Kasim

When i upgrade my Mac Pro to yosemite safari doesn't good work and doesn't save bookmark plz help me to fix it

when i upgrade my Mac Pro to yosemite safari doesn't good work and doesn't save bookmark plz help me to fix it

hi
when i save a page as boomark shown at the bookmark list when i close safari and restart safari evry bookmark that i saved dosn't show at the bookmark list
excuse me for whriting i speak a little english
1 save bookmark and show at the bookmarklist
2 i close safari
3 and reopen it
4any bookmark ,i saved them dosn't show at the bookmark list

Socket communication failure between Java applet and C++ application

I have a java applet that connects to a C++ application via Java's ServerSocket and Socket objects. THe C++ application is using the Winsock 2 API. The applet and application are running on an NT workstation (SP 6) and using IE (5.5) For a very simple C++ test applications the communictions work fine. Once more code gets added to the C++ application the portion of the socket that C++ listens to seems to close. Upon performing a recv call the return value is a zero. Microsoft insists this is a sign the Java side has shut down the socket. The Java applet can still receive messages from the C++ app but C++ cannot receive responses from the Java side. Java throws no exceptions and an explicit check of the socket shows no errors. Again, what puzzles me is that it works for simple C++ applications. Are there any known conflicts between Java and C++ in this regard?
I have inlcuded the basic java code segments below.
/ run Method.
* This method is called by the Thread.start() method. This
* method is required for the implementation of the Runnable interface
* This method sets up the server side socket communication and
* contiuously loops looking for requests from a external
* socket.
* @author Chris Duke
public void run(){
     // create socket connections
     boolean success = false;
     try {
         cServerSocket = new ServerSocket(cPortID);
         System.out.println("Waiting for client to connect...");
         cClientSocket = cServerSocket.accept();
         System.out.println("Client connected");
         // Create a stream to read from the client
         cInStream = new BufferedReader(new InputStreamReader(
           cClientSocket.getInputStream()));
         // Create a stream to write to the client
         cOutStream = new PrintWriter(
           cClientSocket.getOutputStream(), true);
         success = true;
     }catch (IOException e) {
         System.out.println("CommSocket:Run - Socket Exception(1) " + e);
         success = false;
     // if the socket was successfully created, keep the thread running
     while (success){
         try{
            // check socket to see if it is still available for reading
            if (cInStream != null && cInStream.ready()){
                // check for an incoming message
                String message = ReceiveMessage();
                // Send message to listeners
                Event(message);
            if (cInStream == null){
                success = false;
                System.out.println("CommSocket:Run - shutdown");
         }catch (IOException e){
            System.out.println("CommSocket:Run - Socket not ready exception");
            break;
// SendMessage method -
* Sends a text message to a connected listener through port specified by portID
* @author Chris Duke
* @param String message - This will be the message sent out through the server
* socket's port specified by portID.
   public void SendMessage(String message){
      cOutStream.println(message);
      if (cOutStream.checkError() == true)
        System.out.println("SendMessage : Flush = Error");
      else{
        System.out.println("SendMessage : Flush - No Error");
   }

a very simple C++ test applications the communictions work fine. Once more code gets added to the C++ application the portion of the socket that C++ listens to seems to close.
This quite strongly implicates the extra code in the C++ App. The firstly thing I would try would be telnet. Try connecting to both versions of the C++ Application and manually reproducing a proper exchange.
a recv call the return value is a zero. Microsoft insists this is a sign the Java side has shut down the socket.
A correct implementation of recv should return the number of bytes received, or -1 for an error. A zero return indicates no bytes received not a socket closed/error. This sounds like FUD to me.
Are there any known conflicts between Java and C++ in this regard?
I can see no obvious faults, though the code is incomplete, I don't think it's an sockets implementation issue, at either end, it sounds more likely to be a protocol/handshaking bug in the C++ App.

Goods Movement and Billing status at header level

Hello,
Im new to this topic and have some very basic questions
Will WBSTK field be updated with goods movement status for a given sales order number in VBUK table ?
Similarly, will FKSTK/FKSTK or BUCHK will be updated with billing status ?
I know that for a given delivery document number, I can track the status at the item level.
But my aim is to know the overall goods movement and billing status at the order header level.
Any clues will be of great help.
Thanking you in advance.
Regards,
Preethi

Hi Preethi,
A sales order does not determine a billing status for delivery related billing, field VBUK-FKSTK is only determined for delivey.
Just because of this, you will not find billing status field in VA03 -> goto header;
you could only find billing status field for delivery in VL03N -> status overview.
Best regards,
Crystal Lin

Xfce4-goodies applets and transparency

Similar Messages

Maybe you are looking for