XI can handle a File which has hierarchical structures.

Can any one please let me know whether XI handles the following kind of file. Here i am showing the records how these comes in the file.
All records are of type fixed length.
FNR............................................
THR.................................
FTR..............
AER..............
SDR............................
ODR.................
PDR.................
TDR.................
SDR............................
ODR.................
PDR.................
TTR...................................
FCR..............................................
FNR....FCR occurs only once in the file
The occurence of THR....TTR pair is 0 to unbounded
The occurence of SDR,ODR,PDR,TDR is also 0 to unbounded.
Please explain if XI can handle this kind of file, if the answer is Yes, let me know how we need to define the data type to handle this kind of file and also the sender adapter.
Thanks & Regards,
Eswar

Hi Eswaraiah,
Have look at this blog...
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
Regards
Anand

Similar Messages

How to read a file which has header and without header

Hi,
I have a file to file scenario wherein there are txt files in the source system, some of which has header and some without header.
How does the sender adapter dynamically identify a file with header and without header.
I knew that File content Conversion in the sender adapter with "Recordsets per message = 1" can read the header. But how to handle dynamically.
Thanks in advance for suggestions and advice.
Regards.
Praveen

Hi,
Let me give a more clear picture:-
One of my file which has header and the corresponding values is listed hereunder:
PERNR;KID;PNALT;NACHN;NAME2;VORNA;TITEL;TITL2 and so on.....
;1200;1200;Angus;; and so on.........
Other file which has no header but only values in it:-
1200;1200;;Werner;Angus and so on.......
The structure remains same for all the files. The only difference is that some of the file has header in it and some without header. The Message Type is mentioned hereunder:-
DT_LegacyEmployee (Category - Complex Type)
     Employees (Category - Element, Occurence - 1)
          Employee (Categroy - Element, Type - DT_LegacyEmployee_Row, Occurence - 0...unbounded)
               PERNR
               KID
               PNALT
               NACHN
               NAME2 and so on......
I read the file in record row. The file conversion parameters in the file sender adapter are mentioned hereunder:-
Document Name - MT_LegacyEmployee
Document Namespace - http://abc.com/xi
Recordset Name - Employees
Rescordset Structure - Employee,*
Recordsets per Message - 1
Key Field Type - String (Case Sensitive)
Employee.fieldSeparator - ;
Employee.endSeparator - 'nl'
Employee.fieldNames - PERNR,KID,PNALT,NACHN,NAME2,VORNA,TITEL,TITL2 and so on........
How do we dynamically identify whether the file has header or not. Even if the file has header or without header, the file needs to be picked and transferred to the target system. Kindly clarify.
Regards.
Praveen

Error when executing interface which load data from csv file which has 320

Hi,
Can some one provide a resolution for below error:
I have created an interface which load data from csv file which has 320 columns, to a Synonym which has 320 columns in it
using LKM File to SQL, IKM Sql Control Append.
I am getting below error when executing the interface :
com.sunopsis.tools.core.exception.SnpsSimpleMessageException: ODI-17517: Error during task interpretation. Task: 6 java.lang.Exception: BeanShell script error: Sourced file: inline evaluation of: ``out.print("The application script threw an exception: java.lang.StringIndexOutOf . . . '' Token Parsing Error: Lexical error at line 2, column 42. Encountered: "\\" (92), after : "": <at unknown location> BSF info: Create external table at line: 0 column: columnNo
at com.sunopsis.dwg.codeinterpretor.SnpCodeInterpretor.transform(SnpCodeInterpretor.java:485)
     at com.sunopsis.dwg.dbobj.SnpSessStep.createTaskLogs(SnpSessStep.java:711)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:461)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)
Caused by: org.apache.bsf.BSFException: BeanShell script error: Sourced file: inline evaluation of: ``out.print("The application script threw an exception: java.lang.StringIndexOutOf . . . '' Token Parsing Error: Lexical error at line 2, column 42. Encountered: "\\" (92), after : "": <at unknown location>
BSF info: Create external table at line: 0 column: columnNo
     at bsh.util.BeanShellBSFEngine.eval(Unknown Source)
     at bsh.util.BeanShellBSFEngine.exec(Unknown Source)
     at com.sunopsis.dwg.codeinterpretor.SnpCodeInterpretor.transform(SnpCodeInterpretor.java:471)
     ... 11 more
Text: The application script threw an exception: java.lang.StringIndexOutOfBoundsException: String index out of range: 2 BSF info: Create external table at line: 0 column: columnNo
out.print("createTblCmd = r\"\"\"\ncreate table ") ;
out.print(odiRef.getTable("L", "COLL_NAME", "W")) ;
out.print("<?=(extTabColFormat.getUseView())?\"_ET\":\"\"?>\n(\n\t") ;
out.print(odiRef.getColList("", "[CX_COL_NAME]\\t"+
          "<?=extTabColFormat.getExtTabDataType(\\u0022[CX_COL_NAME]\\u0022,\\u0022[SOURCE_DT]\\u0022, \\u0022[DEST_WRI_DT]\\u0022, \\u0022[COL_FORMAT]\\u0022, \\u0022[BYTES]\\u0022, \\u0022[LONGC]\\u0022, \\u0022[SCALE]\\u0022)?>"
     , ",\\n\\t", "","")) ;
out.print("\n)\nORGANIZATION EXTERNAL\n(\n\tTYPE ORACLE_LOADER\n\tDEFAULT DIRECTORY dat_dir\n\tACCESS PARAMETERS\n\t(\n\t\tRECORDS DELIMITED BY 0x'") ;
out.print(odiRef.getSrcTablesList("[XFILE_SEP_ROW]","")) ;
out.print("'\n\t\t") ;
out.print(odiRef.getUserExit("EXT_CHARACTERSET")) ;
out.print("\n\t\t") ;
out.print(odiRef.getUserExit("EXT_STRING_SIZE")) ;
out.print("\n\t\tBADFILE\t\t'") ;
out.print(odiRef.getSrcTablesList("", "[RES_NAME]", "", "")) ;
out.print("_%a.bad'\n\t\tLOGFILE\t\t'") ;
out.print(odiRef.getSrcTablesList("", "[RES_NAME]", "", "")) ;
out.print("_%a.log'\n\t\tDISCARDFILE\t'") ;
out.print(odiRef.getSrcTablesList("", "[RES_NAME]", "", "")) ;
out.print("_%a.dsc'\n\t\tSKIP \t\t") ;
out.print(odiRef.getSrcTablesList("", "[FILE_FIRST_ROW]", "", "")) ;
out.print("\n") ;
if (odiRef.getSrcTablesList("", "[FILE_FORMAT]", "", "").equals("F")) {out.print("\n\t\tFIELDS\n\t\t") ;
out.print(odiRef.getUserExit("EXT_MISSING_FIELD")) ;
out.print("\n\t\t(\n\t\t\t") ;
out.print(odiRef.getColList("", "[CX_COL_NAME]\\tPOSITION([FILE_POS]:[FILE_END_POS])\\t"+
                    "<?=extTabColFormat.getExtTabFormat(\\u0022[CX_COL_NAME]\\u0022,\\u0022[SOURCE_DT]\\u0022, \\u0022DEST_WRI_DT\\u0022, \\u0022[COL_FORMAT]\\u0022, \\u0022[BYTES]\\u0022, \\u0022[LONGC]\\u0022, \\u0022[SCALE]\\u0022)?>"
                    , ",\\n\\t\\t\\t", "","")) ;
out.print("\t\t\n\t\t)\n\t)\n") ;
} else {out.print("\n\t\tFIELDS TERMINATED BY x'") ;
out.print(odiRef.getSrcTablesList("", "[XFILE_SEP_FIELD]", "", "")) ;
out.print("'\n\t\t") ;
if(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").equals("")){out.print("\n\t\t") ;
} else {out.print("OPTIONALLY ENCLOSED BY '") ;
out.print(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(0,1)) ;
out.print("' AND '") ;
out.print(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(1,2)) ;
out.print("' ") ;
}out.print("\n\t\t") ;
out.print(odiRef.getUserExit("EXT_MISSING_FIELD")) ;
out.print("\n\t\t(\n\t\t\t") ;
out.print(odiRef.getColList("", "[CX_COL_NAME]\\t"+
                    "<?=extTabColFormat.getExtTabFormat(\\u0022[CX_COL_NAME]\\u0022,\\u0022[SOURCE_DT]\\u0022, \\u0022DEST_WRI_DT\\u0022, \\u0022[COL_FORMAT]\\u0022, \\u0022[BYTES]\\u0022, \\u0022[LONGC]\\u0022, \\u0022[SCALE]\\u0022)?>"
                    , ",\\n\\t\\t\\t", "","")) ;
out.print("\t\t\n\t\t)\n\t)\n") ;
}out.print("\tLOCATION (") ;
out.print(odiRef.getSrcTablesList("", "'[RES_NAME]'", "", "")) ;
out.print(")\n)\n") ;
out.print(odiRef.getUserExit("EXT_PARALLEL")) ;
out.print("\nREJECT LIMIT ") ;
out.print(odiRef.getUserExit("EXT_REJECT_LIMIT")) ;
out.print("\n\"\"\"\n \n# Create the statement\nmyStmt = myCon.createStatement()\n \n# Execute the trigger creation\nmyStmt.execute(createTblCmd)\n \nmyStmt.close()\nmyStmt = None\n \n# Commit, just in case\nmyCon.commit()") ;
****** ORIGINAL TEXT ******
createTblCmd = r"""
create table <%=odiRef.getTable("L", "COLL_NAME", "W")%><?=(extTabColFormat.getUseView())?"_ET":""?>
     <%=odiRef.getColList("", "[CX_COL_NAME]\t"+
          "<?=extTabColFormat.getExtTabDataType(\u0022[CX_COL_NAME]\u0022,\u0022[SOURCE_DT]\u0022, \u0022[DEST_WRI_DT]\u0022, \u0022[COL_FORMAT]\u0022, \u0022[BYTES]\u0022, \u0022[LONGC]\u0022, \u0022[SCALE]\u0022)?>"
     , ",\n\t", "","")%>
ORGANIZATION EXTERNAL
     TYPE ORACLE_LOADER
     DEFAULT DIRECTORY dat_dir
     ACCESS PARAMETERS
          RECORDS DELIMITED BY 0x'<%=odiRef.getSrcTablesList("[XFILE_SEP_ROW]","")%>'
          <%=odiRef.getUserExit("EXT_CHARACTERSET")%>
          <%=odiRef.getUserExit("EXT_STRING_SIZE")%>
          BADFILE          '<%=odiRef.getSrcTablesList("", "[RES_NAME]", "", "")%>_%a.bad'
          LOGFILE          '<%=odiRef.getSrcTablesList("", "[RES_NAME]", "", "")%>_%a.log'
          DISCARDFILE     '<%=odiRef.getSrcTablesList("", "[RES_NAME]", "", "")%>_%a.dsc'
          SKIP           <%=odiRef.getSrcTablesList("", "[FILE_FIRST_ROW]", "", "")%>
<% if (odiRef.getSrcTablesList("", "[FILE_FORMAT]", "", "").equals("F")) {%>
          FIELDS
          <%=odiRef.getUserExit("EXT_MISSING_FIELD")%>
               <%=odiRef.getColList("", "[CX_COL_NAME]\tPOSITION([FILE_POS]:[FILE_END_POS])\t"+
                    "<?=extTabColFormat.getExtTabFormat(\u0022[CX_COL_NAME]\u0022,\u0022[SOURCE_DT]\u0022, \u0022DEST_WRI_DT\u0022, \u0022[COL_FORMAT]\u0022, \u0022[BYTES]\u0022, \u0022[LONGC]\u0022, \u0022[SCALE]\u0022)?>"
                    , ",\n\t\t\t", "","")%>
<%} else {%>
          FIELDS TERMINATED BY x'<%=odiRef.getSrcTablesList("", "[XFILE_SEP_FIELD]", "", "")%>'
          <% if(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").equals("")){%>
          <%} else {%>OPTIONALLY ENCLOSED BY '<%=odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(0,1)%>' AND '<%=odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(1,2)%>' <%}%>
          <%=odiRef.getUserExit("EXT_MISSING_FIELD")%>
               <%=odiRef.getColList("", "[CX_COL_NAME]\t"+
                    "<?=extTabColFormat.getExtTabFormat(\u0022[CX_COL_NAME]\u0022,\u0022[SOURCE_DT]\u0022, \u0022DEST_WRI_DT\u0022, \u0022[COL_FORMAT]\u0022, \u0022[BYTES]\u0022, \u0022[LONGC]\u0022, \u0022[SCALE]\u0022)?>"
                    , ",\n\t\t\t", "","")%>
<%}%>     LOCATION (<%=odiRef.getSrcTablesList("", "'[RES_NAME]'", "", "")%>)
<%=odiRef.getUserExit("EXT_PARALLEL")%>
REJECT LIMIT <%=odiRef.getUserExit("EXT_REJECT_LIMIT")%>
# Create the statement
myStmt = myCon.createStatement()
# Execute the trigger creation
myStmt.execute(createTblCmd)
myStmt.close()
myStmt = None
# Commit, just in case
myCon.commit().
     at com.sunopsis.dwg.dbobj.SnpSessStep.createTaskLogs(SnpSessStep.java:738)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:461)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)

The issue is encountered because the text delimiter used in the source file did not consist of a pair of delimiters.
Please see support Note [ID 1469977.1] for details.

How to upload a file which has more than 999 line item through BDC ?

Hello Techards
Hi to all
Can any body tell me how to upload a file which has more than 999 line item through BDC for traction F-02 ?
Thanks in advance.
Shovan

Hello Shovan,
You split it up to post two accounting documents with the help of a "suspense" a/c.
Say, you have to post the following line items below:
line 1 - dr. - GL a/c X - $1000
line 2 - cr. - GL a/c Y - $1
line 3 - cr. - GL a/c Y - $1
line 1001 - cr. - GL a/c Y - $1
You cannot post the above as a single doc in SAP (because of technical reasons), so you need to break it up into 2 documents as below:
Doc1
line 1 - dr - GL a/c X - $1000
line 2 - cr - GL a/c Y - $1
line 3 - cr - GL a/c Y - $1
line 998 - cr - GL a/c Y - $1
line 999 - cr - SUSPENSE a/c - $3
Doc2
line 1 - dr - SUSPENSE a/c - $3
line 2 - cr - GL a/c Y - $3
Note that there is no incorrect impact on accounting as first we credit suspense a/c by $3 and next we debit the same suspense a/c by $3 as a result the effect is nil. Similarly, we credit $997 to GL a/c Y (which is less by $3) in the first doc which is compensated by the second doc by crediting the shortfall of $3.
Hope this helps,
Cheers,
Sougata.

I have a Excel file which has lots of PDFs embed as a link. When i converting to PDF the embed links are not working. Please help to slove this issue.

I have a Excel file which has lots of PDFs embed as a link. When i converting to PDF the embed links are not working. Please help to slove this issue.e

I am also looking alternative way using inDesign to create the embed link as like as excel. is there any possible? Thanks for you reply

File Adapter not processing Files which has COMMA in it

Hi Experts,
I am working on Project in SOA 11.1.1.6.
I am trying to process a file which has comma in it. for eg - XXXXXXX-XX_XX_XXX11,99.pdf
I am picking the file using file adapter from SOURCE directory and using another file adapter to WRITE to destination directory. Polling processing is working fine.
I am picking the file from SOURCE directory as ATTACHMENT and WRITING to DESTINATION folder through File Adapter
While doing file WRITE its failing. While reading the file the values of Content Type, Character Set and Encoding are NULL for the ATTACHMENT as they are optional properties.
The error I am getting while File WRITE is
<remoteFault>
<part name="summary">
<summary>java.lang.RuntimeException: Failed to decode properties string att.encoding=null,att.charset=null,att.contentId=AReadFile/XXXXXXXX_XX_XXX11,99.pdf_1352184009640,att.contentType=null,att.partName=attach</summary>
</part>
<part name="detail">
<detail>1</detail>
</part>
</remoteFault>

Comma is usually treated as a separator/delimiter and hence it is not really common to have comma in filename. I think because of this reason File adapter does not support it (have to cross-verify). If you really have a requirement to read/write files with comma in filename then better log a SR with Oracle support.
Regards,
Anuj

How do i remove a file which has attached to the outside of a window

how do i remove a file which has attached itself to the out side of a windownext to the control tabs?

Ah, do you mean it's showing in the header bar?
If so, hold cmd (⌘) while you drag it off to the desktop. It'll disappear in a puff of virtual smoke.
Don't worry, you won't lose the file; the icon in the header (and those in the sidebar) is just an alias.

[SOLVED] recommendation for a text editor that can handle 25mb+ files?

Not sure where to put it, so I put it her (if it's not the right place, can someone please move it.. thanks!)
I'm building a database of about 60,000 files in folder X.
I'm using php to organise all the files and clean them up (for exmaple removing "-" and ":") and then sticking them into a database.
my main text editor is vim,and then I usually use a gui based editor for fast navigation (lets see you go through 1,010,131 lines of output in vim).
The output is usually suppressed, but the amount of files in X, changes daily (one day can go without change, then next day a user can add 20 files and another user can remove a file), so whenever a new file comes in I want to see that my code can handle it properly, then be able to stick in thee db properly.
recently trying to open a 1million line file in Kate, or Kwrite seems to crash dolphin (KDE).
If I install gvim, I'll need to remove Vim, and I dont want to do that.
I'm looking for something small with scroll bars, that only needs to edit txt files.
Last edited by scarletxfi (2010-09-28 22:37:10)

scarletxfi wrote:I tired that, it wasnt the same, I don't know the exact line number, and as the files always change and are different from each other, i check locations which I know to be problematic..
thanks for the suggestions thought , I see I have to work on my VIM navigation skills
If you know that it's some specific subdirectory that usually messes up, or you know the name of the file you want to find, you can do /FILENAME to search for it. If you know it usually is around line 600,000, then try out 600000G.

How to handle user preference which has "_" and " " in the name

Hi Experts,
I have a question how to handle value which has like "_" and "space" etc in user preference.
If setting "a_b-c d", I could not retrieve this because it's escaped in database.
So this code can't get value even though I can set it.
Is there any restriction of name? Is there any documentation how to code user prefernece which has non alphabet and number in the name?
I know it's possible to handle the data like adding escaped data. But I don't think this is the best way to retrieve the data. Because nobody confirm it's not problem in the future.
Could you tell me the best way to get these user preference?
Thanks in advance,
Masaaki Tada
Here is a sample.
<%@ page contentType="text/html;charset=Shift_JIS" %><%@ page language="java" import="com.plumtree.remote.portlet.*, com.plumtree.remote.prc.*, java.util.*" %>
<%
/** * UserInfo - Simple Page * Display User Information*/
// VariablesIPortletContext oPortletContext = null;IPortletRequest oPortletRequest = null;IPortletUser oPortletUser = null;IPortletResponse oPortletResponse = null;IRemoteSession s;IUserManager oUser;
/* Get Portlet Objects */
try{oPortletContext = PortletContextFactory.createPortletContext(request, response);oPortletRequest = oPortletContext.getRequest();oPortletUser = oPortletContext.getUser();oPortletResponse = oPortletContext.getResponse();} catch (Exception e) {oPortletContext = null;oPortletRequest = null;oPortletUser = null;oPortletResponse = null;}
String val = oPortletRequest.getSettingValue( SettingType.User, "a_b-c d" );String hoe = oPortletRequest.getSettingValue( SettingType.User, "abcd" );out.println( "a_b-c d: " + val );out.println( "abcd : " + hoe );
oPortletResponse.setSettingValue( SettingType.User, "a_b-c d", "aiueo" );oPortletResponse.setSettingValue( SettingType.User, "abcd", "bbbb" );%>

Plumtree recommends that user preference names have only alphanumeric characters in them (a-z, A-Z, 0-9). Any non-alphanumeric characters will be encoded by the EDK.
I strongly suggest that you change your user pref name to something that's alphanumeric. However, if that is not possible, you can use the following workaround: in the web service editor, enter the encoded name for the user pref. There are several ways to get the encoded name.
One way is to encode the pref manually, yourself. Plumtree uses the %u encoded format: each non alphanumeric character is converted into %uxxxx, where xxxx is the Unicode representation of the character. For all ASCII characters, just look at the ASCII hex chart. For example, character "-" has a hex value of 2d. So, a preference name "jane_pref" would be encoded to "jane%u002dpref", and you'd enter the latter value on the preferences page in the web service editor.
The other way to find out the encoded value is to set a preference programmatically and use the HTTP tunnel tool to look at HTTP traffic between the portal server and remote server. The remote server will be sending a HTTP header to the portal server (the header name will probably be CSP-User-Pref) and inside the header you should see the pref name, encoded with %u. Just copy it out of there and into the web service editor.
Hope this helps,
Jane

How to register a schema use a .xsd file which has lots of includes schema

Hello, All,
Does someone have the experience to register a schema use a .xsd file which contains several tags like <xs:include schemaLocation="../dt/somedatatypes.xsd"/>?
I tried both the OEM and command line dbms_xmlschema.registerSchema(), although the whole file structure already in the repository, seems like Oracle can't automatically search and find the includes and register it. should I register those includes first? the actual error I got is "ORA-31000: Resource '../dt/somedatatypes.xsd' is not an XDB schema document.ORA-06512: at "XDB.DBMS_XMLSCHEMA_INT", line 0 ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 26 ORA-06512: at line 2" .
Any suggestion? thanks in advance...

We do not (currently) support relative references in included XML Schemas.
In order to use an include or import the target Schema must first be registered with XML DB under some known location. The schemaLocation argument needs to the 'Docuemnt Location Hint', or URL, that was passed to registerSchema when the included schema was registered.
If you have cyclic dependancies between schemas you can use the force option of registerSchema to register the first Schema. This will then allow registration of the second schema to succeed. Once the second schema has been successfully registed the first schema must be explicitiy recompiled using dbms_xmlschema.compileSchema().

How to execute a jar file which has an applet, without using a html file ?

I have a jar file which contains a set of class files. iam able to execute the jar file by using this html code
<html>
<applet code="file.class" archive="file.jar" width="500" height="300">
<param name="name" value="value">
</applet>
</html>
I want to know how to execute this class file without using the html tags.
pls help me out in this.
Anki

Hi,
You can make an executable jar file such that when you double click on that it starts running. Just follow the steps.
1. Open a notepad and write the following
Main-Class: XXXXXXXX
XXXXXXX means Your Main Class name. Don't forget to press Enter after you write your class name.
2. Save the file as Mani.mf
3. In the commant prompt ( your directory ) type following lines.
jar cmf Mani.mf Demo.jar *.*
4. This will make a jar file which is executable jar file
Hope this will help you.
Deepak

How to open a "printable" version of a pdf file which has embedded a swf file?

I've got a project that consist of a pdf file that has a swf inside, it's all managed by a .nav file, a navigator.
The thing is, since the Flash Player is not a part of the pdf file (I think it was a part before), and it has to be downloaded and installed separately, I need to have an option for the users so they can access a more compact and printable version of what the pdf shows, but this time, not using the swf but the alternative, printable, version.
I spent some time looking for this "printable version", but no luck so far, if anyone knows something about it, I would greatly appreciate it.
Thanks.

I see, I didn't know the exact term of what it's called, I've read somewhere and some people refer to it as interactive statements, the project is made with Flash Builder and I use the asset placement plugin. I'm a long time as3 programmer, but I never used a swf file within a pdf.
So, you are telling me that there is no way to have a default fallback option to show, let say, only text when the flash player isn't available?, because, a client of mine told me that he saw once a video showing Adobe featuring a "printable version" of the same pdf when that condition happened. He didn't send me the link or anything, I guess I just need to believe him on that one.
Any help, documentation to read, or orientation would be appreciated.
Edit.: forgot to say, mobile is not an issue/option here, this app or portfolio would play only in desktop.

PP points to an original file which has been deleted

I import an original file (which is 90% trash), edit it, export it as H.264, delete the original, open the edited file, and then PP points to the original which is gone (get the message "where is the file?..." Can I point to the new h.264 file? Is there another work around? I do not want to keep the originals. I've lost a lot of files this way. Can anyone help me out?

I guess I'm a little lost. Why do you need to do your rough cut in a separate program? Premiere can do rough cuts. Your original post sounded like you wanted to delete the long, original clip, but still have the short sections of that clip available in your archive, or for further editing. If that's the case, give the "Collect Files..." command a try. If it fails, you'll lose nothing. If it succeeds, you'll have shorter "original" clips stored in a new folder (i.e. c:/copy of project footage) from which you can create a new project (or continue fine cutting the "copied" project).
...but then you say you don't want to keep originals? How have you lost files this way? By deleting them? Forgive me for asking, but I don't know you or your circumstances: how long have you been editing with Premiere? You do know that when you "edit" your original file it is actually left untouched by Premiere, right? Premiere (actually, pretty much any NLE I can think of) stores references only to the parts of the original file(s) you want to see; the parts you include in your timeline. If it's not in the timeline Premiere basically ignores that part of your original file, but it's never actually deleted.
The only way files are ever deleted (barring something like a hard drive failure) is when you navigate to the actual file on your hard drive (either outside of Premiere or within the Media Browser) and explicitly click "Delete". If you already know that, forgive me for the explanation, but again... perhaps I'm a little lost on what you're trying to accomplish.

How to add a comment in a php file which has html code

Hi
I have a html file which I renamed .php after adding a form. I discovered that the html comment text I was using -  - was affecting how the page rendered, particularly in IE9.
My question is, now that it is a php file do I need to change all the comments syntax? I started to do it using the "apply comment" button in CS5 i.e. syntax: <?php /*?>form<?php */?>.
Is this the right way to do it? It gives "php" icons in design view but appears to render ok.
Thanks

PHP comments:
<?php
//This is a comment
This is
a php comment
block
?>
Use PHP comments inside PHP scripts/code.
HTML comments:


Use HTML comments inside HTML code.
CSS Comments:
     /*comment*/
     /*this is
     a css comment
     block*/
Use CSS comments inside CSS code (either embedded or external).
JavaScript comments:
//this is a single line comment
//this is another single line comment
/*this is a multi-line
javascript
comment
Use JavaScript comments inside JavaScript code (either embedded or external).
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to list local admins in AD as a txt file which has a name as date of the day

Hello,
I have a script which lists local admins of all hosts in Active Directory:
$Searcher = New-Object DirectoryServices.DirectorySearcher([ADSI]"")
$Searcher.Filter = "(objectClass=computer)"
$Computers = ($Searcher.Findall())
md C:\All_Local_Admins
Foreach ($Computer in $Computers)
$Path=$Computer.Path
$Name=([ADSI]"$Path").Name
write-host $Name
$members =[ADSI]"WinNT://$Name/Administrators"
$members = @($members.psbase.Invoke("Members"))
$members | foreach {$_.GetType().InvokeMember("Name", 'GetProperty',
$null, $_, $null) | out-file -append C:\All_Local_Admins\$name.txt
This script outputs HOST machine names as seperate txt files (HOST1.txt, HOST2.txt etc)
What I want is to get a single text file which name gets the date of the day (for example: 05082014.txt --> This file will include local admins of all hosts)
How should I modify above code to manage this?
Thank you very much.

Try setting the file name outside of the loop.
$fname = "$((Get-Date).ToShortDateString().Replace('/','')).txt"
after the write host line add
$ | out-file
-append C:\All_Local_Admins\$fname
Change this line
$null, $_,
$null)
| out-file
-append C:\All_Local_Admins\$name.txt
to
$null, $_,
$null)
| out-file
-append C:\All_Local_Admins\$fname
See if that gives you what you need.

XI can handle a File which has hierarchical structures.

Similar Messages

Maybe you are looking for