XI unable to post IDOC to ECC the interface is FILE-to-IDOC scenario

Hi All,
The XI interface is a FILE-2-IDOC scenario and some times IDOC's in the receiver system are not posted.  I did see successfully message for that particular messages but the IDOC's were not created in the ECC.  If the messages is reprocessed then IDOC's are posted successfully to the ECC system.  The message has checkered flag in the SXMB_MONI tcode.
This issue is occurring intermittently so could some point me in the right direction how to trouble shoot the issue.
Thanks,
Sarvesh

Hi,
Interesting problem...since its intermittant..
You cannot use any of the traditional RWB or message monitoring or cc chanel monitoring here as the error is in the ecc system, so from an XI standpoint it has left XI succssfully..that explains all the chequered flags..indicating success.
we19, we12, we14(process all idocs) test out the whole process with a load..use transaction we46..this can tell you why it is failing....in r/3
from the ecc system to check inbound queue monitoring.
from there you can select the IDocs or queues which you want to monitor, using the specified selection parameters available.
Look at the status record for the idoc that should give you more information, processing status of the idoc...that should tell you the status code assigned to it..
There is one other option here....if you can figure out what sequence they need to be posted in...that might be the reason for the failure..you can specify the sequence to post the idocs in, use qRfc ..
Hope that helps
Regards
Ravi Raman

Similar Messages

  • Hi, every time I attempt to purchase OXS Mountain Lion I get a message that says unable to complete your purchase because "The product distribution file could not be verified. It may be damaged or was not signed." Any idea what I am doing wrong, cheers.

    Hi, every time I attempt to purchase OXS Mountain Lion I get a message that says unable to complete your purchase because "The product distribution file could not be verified. It may be damaged or was not signed." Any idea what I am doing wrong, cheers.

    Welcome to Apple Support Communities
    Press Shift key on boot and purchase OS X 10.8

  • Unable to post return delivery whne the input material is batch managed

    Hi,
    While clearing the Subcontract GRN where the input material is batch managed, unable to put return delviery and the system throws error and unable to complete quantity posting.
    Please guide me.
    Regards,
    RR Gopalan

    This is caused due to some technical restrictions in QM.
    When the reverse movement is being posted through QM process, the goods movement is being created in the background and it is being posted without reference to a existing material document. That is the system behaves as if you create a return delivery via MB01. In this case, the system cannot determine the batch number. As the reverse is created in the background and the components are determined internally and the batch cannot be passed over from the QM transaction. To prevent postings and avoid unnecessary inconsistencies in stocks,system will issue the error message.
    Workaround:
    The message M7389 is configurable. Hence please check in transcation OMCQ and set this as warning message. This would allow you to post the return delivery, But the problem is the batch nubmer would be wrong. So, You can define the corret batch number in the user-ext MBCFC010, it's MM related, You'd better to work with your MM colleagues.
    Best Regards,

  • Not sure if IDoc was created or received in file to idoc scenario

    Hi,
    I configured a file to idoc scenario in my test client for idoc MATMAS.MATMAS02 , now after going thru all the phases of design and configuration and creating partner profile using we20 , when I m executing the scenario , I am not sure wht happened to the idoc becz i can't see in the R/3 system using we05/02 or BD87 in the XI system .
    Pl help how to rectify the error and find out where the error has actually occured.
    ans will be rewrded
    rgds
    mojib

    Hi Mojib,
    first check in SXMB_MONI whether you have a success chequered flag for the file messge.................if there is error here, then rectify your this error and re-run your scenario................if you cannnot see your file msg in SXMB_MONI, then go to RWB and in comm channel monitoring, see the error in sender file comm channel status and rectify the error in sender file comm channel in ID and save and activate it and then re-run your scenario............
    then execute SM58 to see in there is anything in tRFC.........if there is not anything here, then it means your IDOC has reached R/3.................
    then in R/3, execute WE05 for the relevant period, then you will see your IDOC there with some status..........
    Regards,
    Rajeev Gupta

  • IDOC creation issue at XI side - File to IDOC

    Hi Everybody,
    I am working on a File to IDOC scenario (XI 3.0).
    We have to create Orders in the R/3 System using this Interface.
    Mapping used is Java.
    I am using 2 Classes : Group and SendIdoc one below the other in the Interface Mapping:
    Firstly by using Group Class I am Grouping the Records in the file and then creating the IDOCs by using the next class(SendIdoc).
    In the production environment if we drop like 20 files at a time in the source NFS folder the number of IDOCs created are wrong.
    Say for example, for the first file dropped expected IDOCs are 10 but only 8 are created in SXMB_MONI .However in the input payload (in SXMB_MONI) the entire text file is read.
    When we put the files sequentially say one after the other is processed, the number of IDOCs created are fine.
    This is very strange problem.
    I tried changing the polling interval of the channel but was of no help.
    Any parameters we need to set in the channel or XI system to overcome this issue?
    Can someone help me out on this?
    Helpful answers will be rewarded points.
    Thanks & Regards,
    RK

    Hi ,
        When you placing files sequentially its working fine menas there is no problem with Java Code,one morething use synchronize methods or thread programming in Java maps is not advisable.
    as per my knowledge File adapter picking up the recodrs when its giving inout to Java map some thing misisng....
    for one file you need to create multiple IDocs try use QOS EOIO or if its not working then try to use record set per message one like that,let me know.
    Regards,
    Raj

  • Multiple IDOCs based on multiple fields in File to IDOC mapping

    Hello Experts,
         I have a requirement to create multiple IDOCs based on multiple fields.
         Earlier my requirement is to create IDOCs based on ShipID (i.e., for every ShipID new IDOC...I achieved this).
         But now the requirement was to create IDOC based on two more fields like
    Source:
         ShipID1
         FieldA with value1 
         FieldB with value1
    Target :
         1 IDOC to create
    and If
    Source:
         ShipID1
         FiledA with Value2
         FiledB with Value2
         ShipID1
         FiledA with Value1
         FiledB with Value2
    Target:
         2 IDOCs based on FiledA
    Like wise IDOC should create for every change in FiledA and FieldB.
    If FiledA and FiledB has no changes then create IDOC based on ShipID
    please help me in achieving this as this is an urgent requirement.

    Hi Prasad -
    Just concat all the three fields - shipID1, FieldA and FieldB and
    remove contexts
    split by value (value changed)
    collapse contexts
    This way whenever there is a change in any of the above fields you'll have separate IDOC..

  • Unable to post goods reciept for the Purchase order from EWM

    Hi,
    I am working in ECC - SCM EWM system.Created Inbound delivery ,warehouse order and warehouse task.When confirming the Warehouse task the goods reciept should be posted in the ECC system.
    But the GR is not getting posted in ECC.When I check the QRFC moniter in SCM ,the RFC is getting failed due to an error message
    "Deficit of BA Unrestricted-use 1,500 EA : 004-2638".
    Can any one help me inresolving this issue.
    Regards
    Govind

    Please reply if any update on the above query is present.

  • File to idoc interface

    Hi SAP-Xi guru,
    can u explain the purpose of FILE TO IDOC ,IDOC TO FILE scenario.

    Hi Kavitha,
    In addition to above...
    check my post in wiki for File to IDOc
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/fileToIDOC&
    and for IDOC to file check these:
    Introduction to IDoc-XI-File scenario and complete walk through for starters.
    ALE configuration for pushing idocs from SAP to XI
    Sachin

  • BIA file to Idoc Scenario

    Hi,
    I have a requirement of a file to idoc scenario where I need to convert the file in BIA format to an Idoc. Can anyone suggest me a solution on how to use file content conversion? Is there any sample scenario where they have used a BIA format file to be converted as an Idoc?
    Thanks
    Satt

    Dear All,
    For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
    For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
    I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
    Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

  • FILE TO IDOC(R3)

    Can anyone post detailed blogs for transfering data between file to idoc(r3)

    Chandu,
    See this documents for one entire scenario in detail with the screenshots for the subjected scenario:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
    ---Satish

  • IDOC to EDI file scenario and EDI file to IDOC scenario without Seeburger

    Hi All,
    IDOC (Invoice) to EDI file scenario without Seeburger
    Pls let me know if anybody have blogs for the same
    EDI file to IDOC (Orders) scenario without Seeburger
    Pls let me know if anybody have blogs for the same
    Regards

    Hi Rachit,
    >>Can anybody send me blogs to convert IDoc structure to EDI or EDI to IDoc structure using Conversion Agent or using JAVA Mappings.
    Using conversion Agent there is no coding, If you have a conversion agent insatlled in your landscape you will have better understanding..
    Also java code for IDoc to EDI have some problems:
    1. The EDI format differs based on requirement so there will always be a customized code for it.. Like we have IDco to EDIFACT and ANSX12...
    2. Because most of these codes are propriety materials I doubt whether anyone be sharing the complete code here in SDN. Better to have a java consultant at your end and put him with your requirement.. From the reply in above threads you should be clear that what you are looking for can be done from java coding..
    All the best
    Regards
    Suraj

  • File to  idoc mapping

    Hi all
    I dont know much about idocs. I am creating a file to idoc scenario. i have done with(hope so) all the other settings, design and configuration. BUt dont know how to do the mapping.how the control segment fields have to be mapped. what are the mandatory fields in idoc?

    Hi Aarthi,
    You can leave the control records of the Idoc blank since XI fills them up. This is because XI would be the sender for the idoc. If you select "Header mapping" then you have to map control records else not.
    Also in the idoc data segments all fields with a red dot are mandatory. If you do not have a field from the file to map with the mandatory idoc field then either you can suppress it or map it to a constant.
    Hope this helps.
    Regards.

  • File to IDOC With Screenshots

    Hi,
    I am doing FIle to IDOC scenario but have got stuck in ID part what to take care in Receiver COmmunication Channel and Receiver determinaiton etc and donot know how to test after finishing ID part.
    ALso we need to put xml file as input in directory but how we get IDOC activated from, and where to see whether our FIle to Idoc scenario is running fine.?? NOt clear pls help
    Surbhi Bhagat

    Surbhi
    <b>Create Receiver Determination</b>
    Sender Service :File system
    Sender Interface : Outbound Interface.
    Configured Receivers - SAP R/3 system
    <b>Interface Determination</b>
    Sender Service :File system
    Sender Interface : Outbound Interface.
    Inbound Interface : IDOC Interface mapping : File to IDOC Mapping
    <b>Receiver Agreement</b>
    Sender Service  : File System
    Receiver Service : SAP R/3
    Inbound Interface :IDOC
    Receiver comm Channel : IDOC Comm.Channel(Receiver)
    Don't forget to give the Header mapping.
    Give Sender service & Receiver service.
    I hope it helps!!!
    Best regards,
    raj.

  • TO MAP ANSIX12 FILE TO IDOC ORDERS04

    HI ALL,
    i HAVE A FILE WITH THE DATA IN ANSIX12 AND I HAVE TO CONVERT IT TO IDOC ..
    CAN ANY ONE GUIDE ME.
    THANKX

    hi ,
    I have to map the ansi x12 file to idoc meta data and for mapping do i need to write a XML schema for the the ansix12 file .. i need help reagrding this .
    thankx .

  • Unable to import IDoc from ECC to PI 7.1(ESR)

    Hi,
    I am creating an IDoc to File scenario in PI7.1 . I am trying to import the MATMAS IDoc from ECC to PI 7.1.So under the SWCV -> Imported Objects - > Wizard to import IDod/RFC opens -> I enter the ECC system login details -> But when I expand the IDoc node here,I find no IDoc from ECC ,moreover it throws me an error " component should be attached to some frame or dialog"
    Can you please suggest me as what is going wrong.
    Thanks,
    Venu

    Hi all,
    I am using PI 7.3
    When I Import object and passing parameter like application server, system number, uid and password.
    I got this error
            Unable to establish connection to R/3 system servertm_TM9_06 (system=00, client=001)
    Troubleshooting information: 
    Is the target system online?
    Check the connection data; server name and group fields are case-sensitive
    Tips for administrators (see configuration guide for details): 
    Does the user have sufficient authorization in the target system?
    Is the target system configured correctly in etc/services?
    See error logs for details    
    Please help me.

Maybe you are looking for