Xilinx Options in FPGA Target Properties not available

Hello Everyone......I have a little problem.
I can not get Xilinx Options under FPGA Target Propoerties to change the synthesis optimization goal to area instead of speed in LabVIEW 2012. Please let me know the cause and solution of this problem.
Thank You.
Solved!
Go to Solution.

chiks,
Interesting, are you looking in the correct place for the compiler options? Compiler options aren't going to be located under "FPGA Target Properties" as you mentioned previously (sorry I missed this in your first post), rather those options are located under the "Xilinx Options" category when you create an FPGA build spec for compilation.
Right-click on Build Specifications » New » Compilation, then select the Xilinx Options category and you should see a window like this.
Can you confirm that you are looking in this location?
Nick C | Staff LabVIEW Platform Product Support Engineer | National Instruments

Similar Messages

  • Spy menu only showing some items and properties not available

    I am having some issues with the spy menu. In order to try and fix my issues I built the menu from scratch again on one of my pages. Everything works now on that page and when I upload it to the server, it is all there.
    However, when I then copy and paste the menu to all the other pages and upload the the server, the submenu doen't show anymore. When I go and troubleshoot it and highlight the menu in its entirety and click properties, no properties will show. On the working page, this ation delievers me a properties bar where I can + or - menu items. Why is this? As this must be why the submenu is not showing either?
    The page where everything works is this (See sub menu under coaching clinics) http://www.golifecoaching.com.au/go-beyond-registration-test but on every other page on this website, this submenu disappears.
    Can anyone help? I am tearing my hair out and don't fancy having to build the menu from scratch for every page. There has to be a better way.
    I use CS4 and this is my menu;
       <div id="navigation">
        <!--MENU-->
        <ul id="MenuBar2" class="MenuBarHorizontal">
          <li><a href="index.html">Home</a>        </li>
          <li><a href="what-is-coaching.html">What is Coaching</a></li>
          <li><a href="coaching-benefits.html">Coaching Benefits</a>        </li>
          <li><a href="do-you-need-a-life-coach.html">Do You Need a Life Coach</a></li>
          <li><a href="about-go-life-coaching.html">About Go Life Coaching</a></li>
          <li><a href="#" class="MenuBarItemSubmenu">Coaching Clinics</a>
            <ul>
              <li><a href="holdsworth.html">Coaching for Carers</a></li>
              <li><a href="coachingclinic.html">The Coaching Clinic</a></li>
            </ul>
          </li>
          <li><a href="contact-us.html">Contact Us</a></li>
          <li><a href="http://www.golifecoaching.com.au/blog">Blog</a></li>
        </ul>
            <!--END MENU-->
    Jen

    That is brilliant, that is exactly it! Thank you sooooo much for your suggestion. I am so relieved.
    Yes a template would be best, but I am not sure how to do that, so I am left with doubling my work evertime I make a change on this site.
    Thanks Jen
    Date: Sat, 13 Aug 2011 16:43:59 -0600
    From: [email protected]
    To: [email protected]
    Subject: Spy menu only showing some items and properties not available
    Disclaimer: I am new to coding in general and this is my first attempt to help someone.
    I think the properties bar with the + - has to do with the javascript coding that is generated when you create a new tag, and it is located near the bottom of the page just before the closing body tag. 
    looks something like this:
    <script type="text/javascript">
    var MenuBar2 = new Spry.Widget.MenuBar("MenuBar2", );
    </script>
    so dont forget to copy that over too.  Also, check the CSS that is associated within each page and make sure they are all in the same style.
    P.S. Have you considered using a template for the menu bar so you dont have to copy it over each time?
    >

  • Adapter Specific Message Properties not available in SP 15

    Hi
    In the <b>/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 blog Michal is saying that <b>Adapter Specific Message Properties </b> option in File adapter  will be avalible from XI with SP 14. But i am using SP 15 and i am not getting this option in the file to file adapter. Can u please tell me the why its not available.
    Thank & Regards
    Ravi Shankar B

    Hi,
    Try reloading SAP BASIS software component version of SP15 only (check ) into repository.This might enable that option in the ftp/file adapter.
    also see the below links
    /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules
    /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules
    /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
    Regards
    Chilla

  • Managing Monitoring Templates Based on Target Properties (not Administration Groups)

    I understand how to create administration groups, based on a hierarchy of target properties.  In addition, I've assigned monitoring templates to these various groups with limited success.
    But I would like to be able to setup different monitoring templates, metric values, compliance configuration, etc based on the target properties themselves and not just the hierarchy.
    For example, lets say I have a hierarchy of administration groups starting with "Cost Center" at the top and "Location" as the next level.  Now, I want to set up some compliance rules based on Operating Systems and want to do this across all my systems, regardless of administration group.  (ie all Solaris 10 machines setup one way, Solaris 11 machines another).
    Can I do this?

    does your RCDC info look something like the following?
     <my:Control
    my:Name="GroupMemberOfSG"
    my:TypeName="UocListView"
    my:ExpandArea="true"
    my:Caption="Security Groups"
    my:RightsLevel="{Binding Source=rights,
    Path=isAdminAccount}">
    <my:Properties>
    <my:Property
    my:Name="ColumnsToDisplay"
    my:Value="DisplayName,Email,Domain,DisplayedOwner"
    />
    <my:Property
    my:Name="EmptyResultText"
    my:Value="There are no groups according to the filter definition." />
    <my:Property
    my:Name="PageSize"
    my:Value="20" />
    <my:Property
    my:Name="ShowTitleBar"
    my:Value="true" />
    <my:Property
    my:Name="ShowActionBar"
    my:Value="false" />
    <my:Property
    my:Name="ShowPreview"
    my:Value="false" />
    <my:Property
    my:Name="ShowSearchControl"
    my:Value="false" />
    <my:Property
    my:Name="EnableSelection"
    my:Value="false" />
    <my:Property
    my:Name="SingleSelection"
    my:Value="false" />
    <my:Property
    my:Name="ItemClickBehavior"
    my:Value="
    ModelessDialog " />
    <my:Property
    my:Name="ListFilter"
    my:Value="/Group[(Type='Security') and ((ComputedMember='%ObjectID%')
    or (ExplicitMember='%ObjectID%'))]"
    />
    </my:Properties>
    </my:Control>
    </my:Grouping>
    Anthony Marsiglia

  • License Problem - Option NSP on Windows again Not Available

    Hi all,
    I downloaded and just installed the :
    SAP NetWeaver 7.0 ABAP Trial Version
    for Windows.
    To get a license I went to link "SAP Sneak Preview License Key Request"
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/minisap/minisap.htm
    But at "System Id *" combobox the correspondent options for the installation NSP is not available.
    Can I expect that new licenses will be made available soon? 
    Best Regards
    Dominik

    Hi,
    i also have the same problem!! NSP is not being offered. Only those antique versions are being offered in the drop-down list!
    Very very sorry situation for us, the sap fans! Does anybody know how to proceed further? I am under xp(sp3)/maxdb.
    Will be pleased to hear from you!
    cheers
    Kumar/Germany

  • DMA from host to FPGA target is not supported for this remote system.

    I am trying tocommunicate with my FPGA (on the cRIO 9002) from the RTOS.  I setup up anOpen the correct VI reference with no error but as soon I try to access thefifo I receive error -63001 and the attached message says:
    Error -63001 occurredat Open FPGA VI Reference in target - multi rate - variables - fileIO_old.vi
    Possible reason(s):
    NI-RIO FPGACommunications Framework:  (Hex 0xFFFF09E7) DMA from host to FPGA targetis not supported for this remote system. Use another method for I/O or changethe controller associated with the FPGA target. 
    What other I/O optionsdo I have to move data asynchronously from the RTOS to the FPGA. I triedcreating memory but it appears that I can not write to the memory from the RTOSside.
    We also have a 9012sitting around will using this cRIO instead solve this problem. 
    I am very very greenwhen it comes to LabView so I apologize if this is an easy question. 
    Solved!
    Go to Solution.

    As stated in the NI-RIO driver readme,
    DMA is not supported from the host to the FPGA on the cRIO-900x series.
    The cRIO-901x controller supports DMA transfers from host to FPGA and
    FPGA to host while the cRIO-900x series controllers only support FPGA
    to host DMA transfers. Therefore, LabVIEW returns an error if you try
    to transfer using DMA from the cRIO-900x controller.
    The 9012 looks like the ideal solution, you are very lucky to be having extra hardware laying around 
    Rob K
    Measurements Mechanical Engineer (C-Series, USB X-Series)
    National Instruments
    CompactRIO Developers Guide
    CompactRIO Out of the Box Video

  • Additional Properties not available

    Hello,
    I have a problem with SAP Design Studio 1.3 SP1. Normally if you select a CHART component the ADDITIONAL PROPERTIES view appears where you can customize the CHART. But in my case the ADDITIONAL PROPERTIES view is empty there are no options available. How could this be? I hope somebody can help me.
    Best Regards
    Fabian

    Hi Fabian,
    I come across this issue often in Design Studio 1.3 SP1.
    Try this..
    - Click on the Chart component
    - Uncheck Additional properties in the View Menu
    - Now click on the chart or any other component
    - Re-check Additional properties again in the View Menu
    It might sound very silly, but this is what I do to get the issue resolved.
    Let me know if it works for you.
    Regards,
    Sruthi

  • Read Context  Node/Attribute option in webdynpro code wizard not available

    Hi Expets,
    I am new to webdynpro Abap, i have developed a small application to set default values for two fields. i want to use code wizard to implement the code. When i click on code wizard icon  in application tool bar, i have found lot of option like Method call in current controller, method call in used controller, Instantiate used component ... etc. But i didn't find the option Read Context Node/Attribute. Do i need to do any settings to get that. Kindly suggest. Your help will be greatly appreciated.
    Venkat

    Hi,
    Check the NW release,
    I checked with NW 7.02 - 2 tabs were available.
    with NW 7 - only 1 tab was available which you mentioned.
    Additional tab (Context ) might have been added after NW release 7.0.
    Regards
    Manas Dua

  • I would like to change the project page layouts, but setup option in Project Superuser are not available. How can I change the selected page layouts?

    Hi
    I updated the page layouts for a project in Project Management. Now I woujld like to change those chosen page layouts, but the setup options for the project are no longer available for me to change. How can I update the original chosen page layouts (for performance management) to different layouts or change the chosen layouts to the default (blank) layouts?
    Thanks
    Chris van de Graaf

    AppleMan,
    It all began inside the settings of my Sanyo VPC-HD2000A when somehow the selection got switched from 1280 x 720 to that other setting with so-called 25fps. Also, I don't know whether the mishap occurred before or after I took my new footage.
    I edited the clips last night and now they are on my blog and channel and they seem ok but slightly fuzzy.
    I used a Sanyo VPC-HD2000A .7x wide angle lens with macro and I notice that when I zoomed in to the little sun conure, the picture blurred. I think that might be something that happens when one zooms the focus.
    Also, I was born and raised to a teenager in Hawaii, but now Southern California has me in its grip.
    -L

  • Target WSDL not available

    Hi all,
    I'm having a runtime issue invoking a webService (SOAP/HTTP) exposed by another application.
    The situation is as follows:
    Our SOA composite is targeting an application web service.
    This web service WSDL has been supplied to us, along with the target end point to use.
    Due to securty reasons, the end point supplied is not the actual implementation of the web service, but a service router.
    This service router (owned by the application) routes the SOAP calls but it does not route the WSDL query that SOA is performing.
    Whenever our SOA composite tries to invoke the service, it fails since it cannot retrieve the WSDL.
    Using SOAP/UI we are able to execute the web service call, since it does not try to retrieve the WSDL from the end point.
    My question is: Is there a way on SOA 11g to deactivate the WSDL query and just perform the call without that WSDL query?
    Thanks in advance for your support.

    Here is the exception that we are getting:
    <fault>
    <bpelFault>
    <faultType>0</faultType>
    <remoteFault>
    <part name="summary">
    <summary>oracle.fabric.common.FabricInvocationException: Unable to find the WSDL service defined for service name {http://def.abc.com/TechDATACenter/rdc.xsd.}ChangeReceiver. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace and service name in the #wsdl.endpoint element. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate any HTTP proxy settings for the server.</summary>
    </part>
    <part name="detail">
    <detail>Unable to find the WSDL service defined for service name {http://def.abc.com/TechDATACenter/rdc.xsd.}ChangeReceiver. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace and service name in the #wsdl.endpoint element. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate any HTTP proxy settings for the server.</detail>
    </part>
    <part name="code">
    <code>null</code>
    </part>
    </remoteFault>
    </bpelFault>
    </fault>

  • After upgrading to yosmite my restore option in time machine is not avail

    backups in time machine are not he disk but the store option is not avail

    In the Finder, right-click or control-click the folder icon and select
              Show View Options
    from the contextual menu. In the dialog that opens, select None from the Arrange by menu. Close the dialog, enter Time Machine, and try again.
    Another reason why items in a snapshot might not be selectable is that the time-travel view is open on a secondary display. Move it to the primary display, or if necessary, exit and disconnect the external display.

  • Data target is not available when creating an info package in BW

    Hi,
    I am not sure how, but I have accidentally deleted the info packages for one of the info sources. I have created init package successfully, but when I try to create a delta info package for the data mart, the data target( which is an info cube) is not appearing in the data target tab.
    Any help in this issue is higly appreciated.
    Thanks
    Prashant

    PRASHANT ASOPA , did you find a solution to this - I am facing a similar situation! I have tried almost everything including deleting and recreating the update rule, recreating the export datasource, activating everything a couple of times and of course cretaing and deleting info packages, but no matter what I do I can't get the system to recognize the data target.
    The "funny" thing is that everywhere else, even in the "Show data flow" everything looks right!

  • SAPscript language translation target language not available

    Hi Experts,
                    I am translating SAPscript from english to Bosnian but when i click on the search help in target language input box(SE 76) I do not find Bosnia language. What should i do?
    Please help me.
    Thanks in advance.

    HI,
    You just inform to your PM on Who assigned this object to you.
    You raise issue, I am unable to language translation to specific language because this language is not support in this server. this language is upload for this server. Basis people will do further upload this language.
    2 months back i was also facing just like this problem.. after then they configured.....
    Thanks,
    Siva

  • LR 3.4.1 (windows) Print properties not available after reinstalling printer

    after re-installing the printerdrivers, I cannot open the properties windows of the printer (HP B8550) in not one of the printer modes, does anybody know what to doe en how to do it? It words fine in other programs such as Word

    I should add some additional information: the import within LR results in 2 copies of a folder being created on the disk, but only one of them showing in the Folders Pane. For example, images in the folder <20110601> are imported into a new folder <2011-06-01> which LR creates and is shown in LR in this folder name, while the original folder (<20110601>) remains on the disk, still containing the original of the images, as placed there by PhotoMechanic.
    I do not understand this action, nor how LR is choosing the format of the name of the new folder  it is creating.

  • Option Profiler   in  "visualvm" tool not available under Linux ?

    When starting Visualvm 1.0.1 under RedHat Linux
    I get only the three following basics tools: overview monitor threads
    it lacks : profiler
    Is there any option to set to get the profiler tool?
    ( The same version works well under windows )

    To get the profiler tab, monitored application must be running on JDK6. See VisualVM feature matrix at [https://visualvm.dev.java.net/features.html#feature_matrix]

Maybe you are looking for