XML: Custom Color and Bold font for News Title

Hello,
Do anyone know how to fix the following problem?
We changed the color of the title of an newsitem in the RenderList layout by filling the RGB settings. This works fine, however if we want to make the font also bold, the color changing back into the default setting (=blue).
I hope one of you has got a solution.
Kind regards,
Joost

Hi Shankar,
I already tried your suggestion. Unfortunately, it doesn't work.
However, I found the specific problem using a custom color in combination with Style = Link and Font decoration = Bold doesn't work. I found a work around solution, by changing the Style into Header3.
Regards,
Joost

Similar Messages

Italic and bold fonts for Hoefler Text are no longer available to MS Word

Apple provides regular, italic, black, and black italic styles for the Hoefler Text font. I've used them before but since I installed Snow Leopard, I cannot creat italic or bold (black) in MS Word. When I make text italic or bold (black), the characters disappear--the sentence shortens as if I had deleted the phrase, but if I change it back to regular, it reappears.
Font Book shows that I have all of these styles of Hoefler Text in the Library. I tried disabling and then enabling, but that didn't work. Has anyone else encountered this problem? If so, have you discovered a solution? Thank you.

Thanks for the file. It obviously helped, but I am not sure how. I probably should have taken careful notes about what I did by way of disabling and removing the .ttf fonts and then dragging in the .dfont variety. At one stage when I brought up a Hoefler document in Word, the regular Hoefler text had disappeared. I panicked and removed the .dfont version. Later, after trying something else, the text came back but (judging by the numerals) it was not Hoefler. To make a long story short, all styles of Hoefler (including italic and black) are now working. There are no duplicate font files—I used Remove Duplicates—but I have no Hoefler file in either of the two Fonts folders, even though I can see Hoefler Text in Font Book! To be safe, I used Font Book to export the Hoefler Text to a back-up folder, and the version it exported is the .ttf version. In Get Info I confirmed that it’s the 6.1d7e1 variety. I restarted the computer twice, and determined that this situation is stable. Go figure.
In any event, you set me on the right road. Hoefler Text is now working as it should. I appreciate your help.

Custom colors and fonts in in-context editor?

I have added some custom colors and font families in our partner portal > online editor settings for a client site. When editing a page or web app item in the Manage tab of the admin console, I can see these colors and fonts in the editor. However, when going to the Edit tab (in context editing), and clicking on a block with ice:editable='html' I only see the standard fonts and colors.
Does anyone know if this is a known issue? Or is there some workaround to get the custom colors and fonts into the in context editor?

It's all type, and afew 3D shapes I created, but I noticed when they were printed out by the printer at work, everything was quite fuzzy. However this occured when I saw that 24 MB was way too much to e-mail through my works server. So at that point I decided to make everything into a .gif and place them into Indesign and PDF them, by doing that i completey reduced the quality and the size, so after it printed it was very pixailized on the edges, and the colors were a few tones off....
I guess I just want to have the best of both worlds a small pdf and good quality...

Xserver-pl-fonts pkgbuild. iso8859-2 pcf and bdf fonts for X

These are bitmap x-server fonts (aka biznet fonts). They include aliases for standard x-server fonts (though they do not replace them) so you should see special iso8859-2 characters without doing anything else.
xserver-pl-fonts PKGBUILD
pkgname=xserver-pl-fonts
pkgver=1.0
pkgrel=1
pkgdesc="ISO 8859-2 (Central European) bdf and pcf fonts for x-server"
url="http://www.biz.net.pl/iso/x-fonts/index.html"
depends=('x-server')
install=xserver-pl-fonts.install
source=('http://www.biz.net.pl/images/ISO8859-2-bdf.tar.gz'
'http://www.biz.net.pl/images/ISO8859-2-pcf.tar.gz')
md5sums=('5dd69ab949d833944048b10a97f7a589'
'9274f1730275c6d3ba30414a431ca59a')
build() {
install -d -m755
$startdir/pkg/usr/X11R6/lib/X11/fonts/latin2/100dpi
install -d -m755
$startdir/pkg/usr/X11R6/lib/X11/fonts/latin2/75dpi
install -d -m755
$startdir/pkg/usr/X11R6/lib/X11/fonts/latin2/misc
install -m644 $startdir/src/100dpi/*
$startdir/pkg/usr/X11R6/lib/X11/fonts/latin2/100dpi
install -m644 $startdir/src/75dpi/*
$startdir/pkg/usr/X11R6/lib/X11/fonts/latin2/75dpi
install -m644 $startdir/src/misc/*
$startdir/pkg/usr/X11R6/lib/X11/fonts/latin2/misc
xserver-pl-fonts.install
# arg 1: the new package version
post_install() {
echo "------------------------------------"
echo "Add the following font paths to your"
echo "/etc/X11/xorg.conf or /etc/X11/XF86Config"
echo ""
echo "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
echo "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
echo "/usr/X11R6/lib/X11/fonts/latin2/misc"
echo ""
echo "Rebuilding font cache..."
/usr/bin/fc-cache
echo "...done."
# arg 1: the new package version
# arg 2: the old package version
post_upgrade() {
echo "------------------------------------"
echo "Make sure you have the following font paths in your"
echo "/etc/X11/xorg.conf or /etc/X11/XF86Config"
echo ""
echo "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
echo "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
echo "/usr/X11R6/lib/X11/fonts/latin2/misc"
echo ""
echo "Rebuilding font cache..."
/usr/bin/fc-cache
echo "...done."
# arg 1: the old package version
pre_remove() {
/bin/true
# arg 1: the old package version
post_remove() {
echo "------------------------------------"
echo "You can delete the following font paths from your"
echo "/etc/X11/xorg.conf or /etc/X11/XF86Config"
echo ""
echo "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
echo "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
echo "/usr/X11R6/lib/X11/fonts/latin2/misc"
echo ""
echo "Rebuilding font cache..."
/usr/bin/fc-cache
echo "...done."
op=$1
shift
$op $*

Added to my TUR. Thanks for another quality package, lanrat!

I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

Click here for options.
(58961)

[ALV] Text in color and bold

Hello,
I have an ALV Grid and I would like one cell, with text color in red and in bold.
I'm in OOP's with CL_GUI_ALV_GRID.
I've tried like that :
CONSTANTS :
            c_bold(4)           TYPE x       VALUE '00000020',
            c_red(4)            TYPE x       VALUE '00000017'.
*-LAYOUT
fe_layout-cwidth_opt = c_x.
fe_layout-no_rowmark = c_x.
fe_layout-info_fname = 'ROW_COLOR'.
fe_layout-stylefname = 'CELLS_STYLES'.
*-OUTTAB
clear we_style.
we_style-fieldname = 'XXXXX'.
we_style-style = c_bold.
we_style-style = c_red.
insert we_style into table we_outtab-cells_styles.
It doesne't work. The bold put the text color in black.
There is a solution ?
Thank you.

Hello Bernard
I checked my sample report and it shows that '00000037' yields the text in bold and red.
'00000037' = '00000020' + '00000017'   !!!
Below you find a modified version of the sample report:
BREAK-POINT.
CONSTANTS :
      c_bold(4)           TYPE x       VALUE '00000020',
      c_red(4)            TYPE x       VALUE '00000017'.
CLEAR: ls_outtab2.
REFRESH: lt_celltab.
ls_outtab2-maxlen = 0.
ls_outtab2-style = c_bold.
ls_outtab2-style2 = c_red.
ls_style-style = c_bold + c_red.
INSERT ls_style INTO TABLE lt_celltab.
ls_outtab2-celltab = lt_celltab.
INSERT ls_outtab2 INTO gt_outtab2 INDEX 1.
ENDFORM.                    " FILL_OUTTAB2
Entire report:
*& Report ZUS_SDN_ALV_STYLE_LIST
*& Thread: [ALV] Text in color and bold
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1191290"></a>
*& Thread: color alv list display
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1072435"></a>
*& Thread: Hiliting the Specific rows in ALV grid
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1062831"></a>
*& Thread: Reg... coloring of rows
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1041516"></a>
*& Thread: Painting cell in alv with objects
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1029759"></a>
*& Thread: styles
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="830498"></a>
*& Thread: Is it possible to assign color to manually modified record in tabcontrol?
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="878289"></a>
*& The report generates style values and shows their effect in ALV grid.
REPORT zus_sdn_alv_cell_style_2.
TYPE-POOLS: abap.
TYPES: BEGIN OF ty_s_outtab.
INCLUDE TYPE knb1.
TYPES: celltab TYPE lvc_t_styl. " cell style
TYPES: END OF ty_s_outtab.
TYPES: ty_t_outtab TYPE STANDARD TABLE OF ty_s_outtab
WITH DEFAULT KEY.
TYPES: BEGIN OF ty_s_outtab2.
INCLUDE TYPE lvc_s_styl.
TYPES: celltab TYPE lvc_t_styl. " cell style
TYPES: END OF ty_s_outtab2.
TYPES: ty_t_outtab2 TYPE STANDARD TABLE OF ty_s_outtab2
WITH DEFAULT KEY.
DATA:
gs_layout TYPE lvc_s_layo,
gs_variant TYPE disvariant,
gt_fcat TYPE lvc_t_fcat.
DATA:
gt_outtab TYPE ty_t_outtab,
gt_outtab2 TYPE ty_t_outtab2.
PARAMETERS:
p_rows    TYPE i DEFAULT 200.
START-OF-SELECTION.
SELECT * FROM knb1 UP TO 100 ROWS
INTO CORRESPONDING FIELDS OF TABLE gt_outtab
WHERE bukrs = '1000'.
** data: gr_kunnr    type RANGE OF kunnr.
** SELECT kunnr as low from knb1 into CORRESPONDING FIELDS OF TABLE gr_kunnr
**    WHERE bukrs = '1000'.
PERFORM set_layout_and_variant.
PERFORM set_cell_style.
** CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
**    EXPORTING
**      i_structure_name = 'KNB1'
**      i_grid_title     = 'Cell Styles'
**      is_layout_lvc    = gs_layout
**      i_save           = 'A'
**      is_variant       = gs_variant
**    TABLES
**      t_outtab         = gt_outtab
**    EXCEPTIONS
**      program_error    = 1
**      OTHERS           = 2.
** IF sy-subrc = 0.
** ENDIF.
PERFORM fill_outtab2.
** PERFORM fill_fieldcatalog_2.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
    EXPORTING
      i_structure_name = 'LVC_S_STYL'
      i_grid_title     = 'Cell Styles'
      is_layout_lvc    = gs_layout
      i_save           = 'A'
      is_variant       = gs_variant
*      IT_FIELDCAT_LVC = gt_fcat
    TABLES
      t_outtab         = gt_outtab2
    EXCEPTIONS
      program_error    = 1
      OTHERS           = 2.
IF sy-subrc = 0.
ENDIF.
END-OF-SELECTION.
*& Form SET_LAYOUT_AND_VARIANT
FORM set_layout_and_variant .
CLEAR: gs_layout,
gs_variant.
gs_layout-cwidth_opt = abap_true.
gs_layout-stylefname = 'CELLTAB'.
gs_variant-report = syst-repid.
gs_variant-handle = 'STYL'.
ENDFORM. " SET_LAYOUT_AND_VARIANT
*&      Form set_cell_style
*       text
FORM set_cell_style .
* define local data
CONSTANTS:
lc_style_bold TYPE int4 VALUE '00000121',
lc_style_red TYPE int4 VALUE '00000087',
lc_style_cursive TYPE int4 VALUE '00008700',
lc_style_underline_faint TYPE int4 VALUE '00008787',
lc_style_underline TYPE int4 VALUE '00008707',
lc_style_underline_red TYPE int4 VALUE '00008007'.
DATA:
ls_outtab TYPE ty_s_outtab,
ls_style TYPE lvc_s_styl,
lt_celltab TYPE lvc_t_styl.
CLEAR: ls_style.
ls_style-fieldname = 'BUKRS'.
ls_style-style = '00000011'.    " make contents invisible
INSERT ls_style INTO TABLE lt_celltab.
** CLEAR: ls_style.
** ls_style-fieldname = 'BUKRS'.
** ls_style-style = lc_style_bold.
** INSERT ls_style INTO TABLE lt_celltab.
** CLEAR: ls_style.
** ls_style-fieldname = 'KUNNR'.
** ls_style-style = lc_style_red.
** INSERT ls_style INTO TABLE lt_celltab.
** CLEAR: ls_style.
** ls_style-fieldname = 'ERDAT'.
** ls_style-style = lc_style_cursive.
** INSERT ls_style INTO TABLE lt_celltab.
** CLEAR: ls_style.
** ls_style-fieldname = 'ERNAM'.
** ls_style-style = lc_style_underline.
** INSERT ls_style INTO TABLE lt_celltab.
ls_outtab-celltab = lt_celltab.
MODIFY gt_outtab FROM ls_outtab
TRANSPORTING celltab
WHERE ( bukrs = '1000' ).
ENDFORM. " SET_CELL_STYLE
*&      Form FILL_OUTTAB2
*       text
* --> p1        text
* <-- p2        text
FORM fill_outtab2 .
* define local data
DATA: ls_outtab2 TYPE ty_s_outtab2,
        ld_num8(8) TYPE n,
        ld_idx      TYPE i,
        ld_fname    TYPE fieldname,
        ld_perc     TYPE i,
        ld_text(50) TYPE c.
DATA:
ls_style TYPE lvc_s_styl,
lt_celltab TYPE lvc_t_styl.
FIELD-SYMBOLS: <ld_style> TYPE lvc_style.
ld_num8 = 0.
DO p_rows TIMES.
    WRITE syst-index TO ld_text NO-ZERO.
    CONDENSE ld_text NO-GAPS.
    ld_perc = ( syst-index * 100 ) / p_rows.
    CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
      EXPORTING
        percentage = ld_perc
        text       = ld_text.
    CLEAR: ls_style,
       ls_outtab2.
    REFRESH: lt_celltab.
    ls_outtab2-maxlen = syst-index.
    MOVE ld_num8 TO ls_outtab2-style.
    ls_style-style = ls_outtab2-style.
    INSERT ls_style INTO TABLE lt_celltab.
    ls_outtab2-celltab = lt_celltab.
    APPEND ls_outtab2 TO gt_outtab2.
    ADD 1 TO ld_num8.
ENDDO.
BREAK-POINT.
CONSTANTS :
      c_bold(4)           TYPE x       VALUE '00000020',
      c_red(4)            TYPE x       VALUE '00000017'.
CLEAR: ls_outtab2.
REFRESH: lt_celltab.
ls_outtab2-maxlen = 0.
ls_outtab2-style = c_bold.
ls_outtab2-style2 = c_red.
ls_style-style = c_bold + c_red.
INSERT ls_style INTO TABLE lt_celltab.
ls_outtab2-celltab = lt_celltab.
INSERT ls_outtab2 INTO gt_outtab2 INDEX 1.
ENDFORM.                    " FILL_OUTTAB2
*&      Form FILL_FIELDCATALOG_2
*       text
* --> p1        text
* <-- p2        text
FORM fill_fieldcatalog_2 .
* define local data
DATA: ls_fcat TYPE lvc_s_fcat,
        lt_fcat TYPE lvc_t_fcat.
DATA: ld_fname TYPE fieldname.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
*     I_BUFFER_ACTIVE              =
      i_structure_name             = 'LVC_S_STYL'
*     I_CLIENT_NEVER_DISPLAY       = 'X'
*     I_BYPASSING_BUFFER           =
*     I_INTERNAL_TABNAME           =
    CHANGING
      ct_fieldcat                  = lt_fcat
    EXCEPTIONS
      inconsistent_interface       = 1
      program_error                = 2
      OTHERS                       = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DELETE lt_fcat WHERE ( fieldname NE 'STYLE' ).
READ TABLE lt_fcat INTO ls_fcat INDEX 1.
DO 16 TIMES.
    ls_fcat-fieldname = 'STYLE'.
    ls_fcat-col_pos = syst-index.
    WRITE syst-index TO ld_fname NO-ZERO.
    CONDENSE ld_fname NO-GAPS.
    CONCATENATE ls_fcat-fieldname ld_fname INTO ls_fcat-fieldname.
    APPEND ls_fcat TO gt_fcat.
ENDDO.
ENDFORM.                    " FILL_FIELDCATALOG_2
Regards
Uwe

Using external XML to add and set parameters for AS cue points.

Hi there. I am trying to use external xml to set cue point
times (for video), titles, and other parameters. I have everything
set up, except getting the proper data from the xml file to set the
parameters for my cue points. I am researching hard and learning
quickly - at this point, I need help. Thanks!

Anyone?
Still working on this if anyone has advice. Still haven't
been able to figure out how to put xml data in the right place:
addASCuePoint(//data from xml here to set name and time of
cue point - HOW??//);
Thanks!

About Line (pen) color and thickness (width) for DWG/DXF files in ECLVIEWER

Hello,
sapgui 640
set Line (pen) color and thickness (width) for DWG/DXF files in ECLVIEWER Loader Preferences,
is effective for paper A2,A3,A4 dwg file,but isn't effective for paper A1 and extend length dwg file .
this set for line(pen) color and thickness is different to different size paper dwg file?
how to solve this problem?
Vera Pang.

Hi Vera,
in fact that this issue is still valid for you. Could you please tell us which ECL Viewer version do you use and in which release this happens? Because in release ECC 500 there was some issue which got solved by note 964419.
Best regards,
Christoph

Custom openAll and closeAll function for nested CollapsiblePanels

Custom openAll and closeAll function for nested
CollapsiblePanels:
As a result of CollapsiblePanelGroup openAll() not working (
see
post here
) I attempted to create my own functions. Unfortunately this
has brought two problems; 1) IE completely none responsive, and 2)
custom openAll function opens some but not all CollapsiblePanels.
I suspect that I have not put something somewhere that would
inform CollapsiblePanelGroup that there is nesting. Can anyone
please have a look (
sample
page here
) and offer suggestions.
Happy Thanksgiving to all!

I posted a working version of your sample in your original
post
here.
--== Kin ==--

Thunderbird changing existing color, and occasionally font, from original messages in replies

Hello,
Thunderbird keeps consistently changing text color (always) and font (sometimes, intermittently) when I reply to a message. I hope the attached images will make clear what I mean.
I have many e-mail exchanges where individuals involved use both font and color to make it instantly possible to distinguish who said what, and often in what order, based upon the font being specific to the individual and the color specific to the response given.
You will see in the attached screen shots that the original message contained two different fonts in dark blue colors. When I hit "Reply" the compose window switches all the text from the old messages to black. In this case it wouldn't matter much, but it can be very disorienting when you have an e-mail exchange going on that's got more participants all of whom use signature fonts and change either the font and/or color as the conversation progresses. Having everything "go black" removes essential context.
I also find it odd that when you place your cursor in the middle of existing text and open up a new line to insert your own material that the new material always mimics the last font that was in the material you've just "split open" to add your own reply. In virtually every other e-mail editor I've used when you place yourself in existing text and split it apart by hitting a return the opened area typically would use the font and font color you currently have specified in the compose window.
If there are settings I need to tweak to:
1. Force Thunderbird to maintain all existing fonts and font colors when replying to an existing e-mail message,
2. Get Thunderbird to use the font and font color I have chosen in the compose window any time I split existing quoted material to add new material,
I'd love to know what those settings are.

Matt,
I decided to do some experimentation with creating multiple messages and replies strictly within Gmail's web interface and then to reply to same from Thunderbird. After that, I attempted to start the same sort of chain strictly using Thunderbird to create the messages. The difference is pretty stark.
The first attachment is how the multiple fonts and colors that originated from Gmail show in Thunderbird's reading window. They are all correct here.
The second shows how the multiple fonts and colors that originated from Gmail show up when I reply from within Thunderbird. Again, all of those fonts and colors are maintained as sent and the font and color I designated in my Thunderbird options are what get used when composing the reply.
The last shows what happens when I sent a message created in Thunderbird with one font and color and then go to reply to it from within Thunderbird after having switched my default font and color choice for composition intentionally prior to replying. The font from the original message is retained in the reply, but the color is converted to what has been selected for composition. This suggests to me that Thunderbird is not retaining color information at each "level" within a reply. It has to have sent color information in the original message because it shows up in that color on receipt when reading (I didn't bother with a screen shot, but if you want one I can get one). When replying it is stripping or overwriting the color information from the original message and using the current compose color and applying it to everything in the window.
As far as I'm concerned, that's a bug.
Brian

Digusted with the lack of Customer Service and Complete disregard for Inconveniences

Its a shame I have to come here in order for my voice to be heard. I have spent many hours on the phone with technical support and customer service and it has been to no avail. As a longstanding verizon wireless customer I assumed the high level of customer service experienced there would be translated when I decided to pay MORE money and switch from DirectTV to Verizon FIOS. The last few days have proven me wrong as I still remain without internet, tv, or phone service due to a technical issue beyond my fault. I spent an hour on the phone yesterday only to find out a technician would need to be scheduled and sent to my home today. Working in sales, I have reports I must complete each day requiring use of a WIFI connection so this was already becoming an inconvenience on top of the fact I had to be available between 8-12 and miss a half day of work. Not only did the technician never show up but lied in the notes and stated he/she made an attempt to reach me by phone. My call log shows no incoming phone calls during anytime between 8-12 today. When I called tech support to check on the status of when they would be getting someone back out they informed me I would have to wait until tomorrow afternoon before someone could come out. I expressed my extreme displeasure with having to miss more time from work (which is additional money lost) and inconvienece as I would have to move my day around to find a place with free WIFI after work hours to complete my reports. Traffic in DC is not friendly and this has completely turned me off. Veriozn FIOS is unreliable and the level of service I have received to date has been sub par to put it politely. Offering me 2 pro-rated days back on my service doesn't even begin to compensate for the missed time out of work nor the gas and inconvience of running to the nearest free WIFI so I am able to do work required of me. I decided to switch to FIOS because of the verizon name assuming the quality of the product and level of service would be one I could depend on. This has been the farthest thing from what has taken place. I now have another appointment tomorrow and quite unsure if anything at all will happen. I need some somebody from corporate to receive this message as it took me forever to find this forum to express myself and try to come to some resolve to make things right in this situation. None of your customer service reps possessed any information on how to contact corporate and due to my experience I can see why. You all would likely have to hire full time stafff to accomodate the level of complaints coming in. Pending how this situation is resolved, I may or may not take my story to social media and as many review and blog sites as possible. Verizon FIOS has ruined my day and I hope that someone will care enough to make this situation right.

Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.
Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.
To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
Please keep all correspondence regarding your issue in the private support portal.

HT1438 Estimated cost and turnaround time for new iPad screen replacement?

Looking to see what others have experienced in roundabout cost and turnaround time for screen/glass replacement on new iPad... Everything else seems to be in working order...

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Apple will provide a replacement iPad for:
iPad model
Out-of-Warranty Service Fee
New iPad
$299
iPad 2, iPad
$249
You can get the glass replaced at 3rd party repair sources for less $, however, the Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
 Cheers, Tom

Tax model, Tax combinations and Tax types for New Jersey

We are having problems in computing taxes correctly for Employees who have their Work tax area and Residence tax area as New Jersey.
Can anyone please help with the best Tax model, tax combination and Tax types for these combination for New Jersey.
It will be better if you have employees in New Jersey, who have their Taxes deducted correctly.
We are in an implementation and unfortunately it has been a while since we have applied any Tax related SAP notes or BSI tubs.
Appreciate all help.

i have been researching and have found that NJ state taxes are like Puerto Rico taxes. The Schema UMOT may have to be used with a different modifier to calculate Withhoding tax for NJ , different from FED.
Has anyone of you used this schema ? I find that UTAXRAUTHY ( tax authority) is an Operation in the deecisison tree .Can anyone confirm if Tax type is also an operation?
I shall appreciate any related feedback.Thanks.

Suitable Fonts for new website

I have never developed a website, but now that I have iWeb '08 I am going to try. I have heard that there are only certain fonts that you should use (which is disappointing because I have a great font library) and I am an artist and would like at least my logo to look like it actually does. What are the guidelines for choosing fonts for a website? I know this is a dumb question, but I am a total beginner.

In general you should try to use web safe fonts.....
http://www.iwebformusicians.com/WebMusic/FontsandColors.html
You can use other fonts by converting them to an image but you should do this sparingly as it will increase your page download time. The iWeb help file will show you how to do this.
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Setting bold font for nodes which are not leaf nodes

In JTree, is it possible to set the font for nodes which are not leaf nodes. Can I do this without using custom renderer, or at the most using a DefaultTreeCellRenderer ?
regards,
nirvan

In JTree, is it possible to set the font for nodes which are not leaf nodes. Can I do this without using custom renderer, or at the most using a DefaultTreeCellRenderer ?
regards,
nirvan

XML: Custom Color and Bold font for News Title

Similar Messages

Maybe you are looking for