XML data type problem

I am trying to unflatten data from an xml file but my input type for the type on the unflatten I believe is invalid and I am getting error 1106.
Attached is the xml file and VI
XML file is in text due to upload constraints
Paul Power
I have not lost my mind, it's backed up on a disk somewhere
Solved!
Go to Solution.
Attachments:
TestData.txt ‏2 KB
XML Cluster.vi ‏35 KB

Your data type cluster does not match your XML file. Fixed VI (LV version 2013) is attached. However, the file you posted appears to be a single element, not the entire file, so I cannot verify it works.
If you have an earlier version of LabVIEW, the cluster was missing a timestamp and had a cluster at the end which should have been a string.
Duplicate post from here.
This account is no longer active. Contact ShadesOfGray for current posts and information.
Attachments:
XML Cluster.vi ‏44 KB

Similar Messages

Japanese characters alone are not passing correctly (passing like ??? or some unreadable characters) to Adobe application when we create input variable as XML data type. The same solution works fine if we change input variable data type to document type a

Dear Team,
Japanese characters alone are not passing correctly (passing like ??? or some unreadable characters) to Adobe application when we create input variable as XML data type. The same solution works fine if we change input variable data type to document type. Could you please do needful. Thank you

Hello,
most recent patches for IGS and kernel installed. Now it works.

XML Data Type in oracle

I am a developer in .NET with having experience working on SQL server.
I want to know whether there is an xml data type in oracle.
I have an xml in my front end and want to insert record in the database for the values inside that xml. What i am doing currently is that i am retreiving the value in the xml in the .NET code and passing the values a parameter to a stored procedure in oracle. what i want to do is to pass the xml directly to stored procedure in oracle and retrieve the values there (using Xquery) and insert the records.
This is possible with SQL server 2005. I want to know is this possible with Oracle.
Thanks and regards,
Sameer J Narkar

Wonderful - a documentation question!
You will find your answer by going to the general documentation portal at http://tahiti.oracle.com following the path to the database version of interest, and looking in the SQL Reference manual. Chapter 2 discusses all data types, including the several supported for XML.
In addition, under the 'Books' tab, there are several XML-developer specific reference manuals.
(Oracle's support for XML generally blows away the others. The price for the extreme flexibility is an ease-of-use hit.)
Message was edited by:
Hans Forbrich
removed the punctuation from the displayed URL which resulted in an automatically included trailing comma.

Xml data type is not supported in distributed queries. Remote object 'OPENROWSET' has xml column(s).

Hi,
Can anyone help me out please.
I have written one stored Procedure to create a views using Openrowset(openquery) but for tables which contains xml data types throwing error while executing the SP. Error
" Xml data type is not supported in distributed queries. Remote object 'OPENROWSET' has xml column(s)."
Please refer the Stored Procedure & error message below.
USE [Ice]
GO
/****** Object: StoredProcedure [dbo].[Pr_DBAccess] Script Date: 08/14/2014 16:08:20 ******/
SET
ANSI_NULLS ON
GO
SET
QUOTED_IDENTIFIER ON
GO
ALTER
PROCEDURE [dbo].[ Pr_DBAccess](@SERVERTYPE
NVARCHAR(50),@SERVERNAME
NVARCHAR(100),@DATABASENAME
NVARCHAR(100),@SCHEMANAME
NVARCHAR(100),@TABLENAME
NVARCHAR(100),@USERNAME
NVARCHAR(100),@PASSWORD
NVARCHAR(100))
AS
BEGIN
DECLARE @openquery
NVARCHAR(4000),
@ETL_CONFIG_IDN
NVARCHAR(100);
IF @SERVERTYPE='SQL'
BEGIN
SET @openquery=
'CREATE VIEW '+@TABLENAME+
' WITH ENCRYPTION AS SELECT * FROM OPENROWSET(''SQLNCLI'',''SERVER='+@SERVERNAME+';TRUSTED_CONNECTION=YES;'',''SELECT * FROM '+@DATABASENAME+'.'+@SCHEMANAME+'.'+@TABLENAME+''')'
SELECT @openquery
END
EXECUTE
sp_executesql @openquery
END
----While running the SP manually below error occured

HI ,
1. You cannot use a table or view that contains xml or clr type as 4-part name in your query
2. You need to cast the column to either nvarchar(max) or varbinary(max) or other appropriate type to use
3. If you have a table that has xml type for example then you need to create a view that contains all columns other than xml and query it instead. Or you can issue a pass-through query using OPEN QUERY with the appropriate columns only.
Here is a work around:
SELECT
Cast(a.XML_Data as XML) as XML_Data
FROM
OPENQUERY([LINKED SERVER NAME HERE],'
SELECT
Cast(XML_Data as Varchar) as XML_Data
FROM
[DATABASE NAME].[SCHEMA].[TABLE NAME]'
) a
Basically, the data is queried on the remote server, converts the XML data to a varchar, sends the data to the requesting server and then reconverts it back to XML.
You can take help from below link;
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/c6e0f4da-821f-4ba2-9b01-c141744076ef/xml-data-type-not-supported-in-distributed-queries?forum=transactsql
Thanks

Source XML data type declaration querry

Hi all,
I am very confused in below XML data type declaration.
I am dealing first time with this type of XML.
In source XML header items are mentioned in header node(address).
<address addressline1="6th & Hunt" addressline2="" city="Pryor" state="OK" country="Sun" zip="74361">
- <phoneinfo>
<phone type="work">9999999999</phone>
</phoneinfo>
- <faxinfo>
<fax>100000001</fax>
</faxinfo>
</address>
Please Help in the "Data type declaration" of above source XML????
How can i use this data type in message mapping????
Thanks & Regards

Hi Umesh,
You can use Data types with Attributes in XI.
http://help.sap.com/saphelp_nw2004s/helpdata/en/3b/d2a3f7a166514abb8cf5635b71974f/frameset.htm
And you can even try with the External Definition also.
Hope this helps,
regards,
Moorthy

Oracle BI Administration Tool 11g - Fields have the XML data type

I'm using Oracle BI Administration Tool 11.1.1.3.0 and I need to import Metadata an Oracle table where same fields have the XML data type.
Please, there is someone can tell me what I must do to define these fields in Administration Tool?
Regards.

Hi,
in u r RPD -->Try to select import Connection Type as : XMLA then give it the URL of u r analysis services 2000 then u can able to import it.
refer:
http://www.biblogs.com/2008/02/01/obiee-hybrid-olap-reporting-using-ms-analysis-services-oracle/
http://www.rittmanmead.com/2007/11/essbase-integration-with-obiee-101331/
Thanks
Deva

XML Data Type

Hi
Does the latest version of Designer support XML Data Type?
Thanks,
Ila

No there is no direct support for XML datatype..
However, you can follow Note 204966.1 Using Designer Domains to Exploit New Datatypes
hope this helps

XML operation resulted an XML data type exceeding 2GB in size. Operation aborted.

I have table with one million rows, when i am using xml path ('Root'), it giving me an error
"XML operation resulted an XML data type exceeding 2GB in size. Operation aborted."
This is a limitation of sqlserver. I have to xml path because i have to create nodes and attributes. In more complex case i will be joining multiple tables to get id and other attributes so combining multiple xmls in not an option here.
any workaround....thanks in advance

Here an example of your query that retrieve record in batch of 2 records. In real code, you should save the last id retrieved and call the query in a loop.
DECLARE @BATCHSIZE AS integer
SET @BATCHSIZE = 2
DECLARE @LASTID As Integer
SET @LASTID = 0
select top(@BATCHSIZE) id as "@id"
,name as "@name"
select id as "@id"
,name as "@name"
select *
from @products p
where p.customer_id = cs.id
group by id,customer_id,name
for xml path ('product'),Root('products'),type
from @customer cs
where cs.client_id = c.id
group by id,client_id,name
for xml path ('customer'),Root('customers'),type
from @client c
where c.id > @LASTID
order by c.id
for xml path ('clients'),Root ('Main')

DSC with XML data type

Hi,
Can someone explain to me what the difference is between the xml data type and the Document data type in workbench? I would like to use the xml datatype in my DSC thinking it is most likely the best representation of an xml string. But I've heard that Document is more widely used and that it can represent an xml entity as well. Is this right?
My ultimate goal is to write a DSC and use a type that represent an xml string. I would like the component.xml to have the type for my input variables to automatically be typed as "xml" or "document" (whatever the one i should be using is).
I tried creating variables of both types ("xml' and "document", lower case d) and have those passed into my DSC for inspection. The object passed in are as follows:
xml: org.apache.xerces.dom.DocumentImpl
document: com.adobe.idp.Document
But if I use any of those in my component.xml, workbench is typing my variables as "DocumentImpl" or "Document".
Any ideas?
Thanks in advance!
Nic

The xml variable (org.w3c.doc.Document) is a native xml data type. That means you can use xml functions and/or xPath expressions on the content of the variable.
The document variable (com.adobe.idp.Document) is a more generic data type that can store any binary data. If you happen to store xml in that data type, you won't be able to run xml functions or xPath expression directly on the variable content since it's treated as binary data.
If you don't need to manipulate or access the content of the xml, then either data types will work. Otherwise, I would use the xml data type.
In your component xml, make sure your xml data type is set to org.w3c.doc.Document and you'll see xml in Workbench.
Jasmin

Single Line Data Type to Collection Data type, Problem in Message mapping

I have a csv file, the file has the following lines
hdr1
line1
line2
lineN
hdr2
line1
lineN
I want it to map it to an object with the ff structure
root object 1..1
object 1..1
subobject 0...n
hdr 1..1
line 1...n
How is the mapping of the said data types? Is it possible? Please help....thanks in advance

Hi Raymond,
as you have two different strutures:
- HEAD
- ITEM
and the occurences of the structures are not fix (say: e.g. HEADER occurs always 3 times), you need a key-field, which identifies each row as HEAR or ITEM.
If you do not have a key-field, you must design a "generic structure" that fits to both:
HEAD & ITEM. After the conten-conversion into this generic structure you need a message-mapping that identifies your HEADs and ITEMs.
File content conversion sites
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards Mario

XML Data Server Problem

I am trying to setup an XML data server and can't get passed the error: java.sql.SQLException: Could not generate the DTD because the file could not be created. Verify that you have write permission in the directory.
I have placed my xml file in the odi\demo directory where the sample files are and it doesn't seem to help. Here is the url I'm using: jdbc:snps:xml?f=../demo/xml/sample-incident-report1.xml
This url does not give the errors and connects w/o a problem: jdbc:snps:xml?f=../demo/xml/salesorg.xml
Same directory, one gives the error and one does not.
Thanks for any help.

It seems that anything a little complex causes this error. I've tested with relatively flat xml documents and don't encounter the problem.

Float data type problem!

Hi ALL,
I have a problem with float data type. Please tell me how to fix it if you know.
THANKS!
Source code:
class testFloatType {
public static void main(String args[]) {
float i = 0.9f, j = 0.8f, k = 0.1f;
System.out.println("i = " + i);
System.out.println("j = " + j);
System.out.println("k = " + k);
System.out.println("i - j = " + (i - j));
System.out.println("i - k = " + (i - k));
Result:
i = 0.9
j = 0.8
k = 0.1
i - j = 0.099999964
i - k = 0.79999995

Hi garazdawi,
I try to use the double to instead of float, but it still has a bit error!
Source code:
class testFloatType {
public static void main(String args[]) {
float i = 0.9f, j = 0.8f, k = 0.1f;
System.out.println("i = " + i);
System.out.println("j = " + j);
System.out.println("k = " + k);
System.out.println("i - j = " + (i - j));
System.out.println("i - k = " + (i - k));
double a = 0.9d, b = 0.8d, c = 0.1d;
System.out.println("a = " + a);
System.out.println("b = " + b);
System.out.println("c = " + c);
System.out.println("a - b = " + (a - b));
System.out.println("a - c = " + (a - c));
Result:
i = 0.9
j = 0.8
k = 0.1
i - j = 0.099999964
i - k = 0.79999995
a = 0.9
b = 0.8
c = 0.1
a - b = 0.09999999999999998
a - c = 0.8

Language data type problem

I am executing a FM from XI to create a Material with several languages in the form of ES, EN, FR and so on, what is the type that I have to use in the FM for this languages? I use a simple Char 2 type and does not work from XI but If I use SPRAS works fine, the problem is SPRAS is a Char 1 type so the system get confuse with for instance PL and PR.

Hi
The language in R3 is a field of 1 char, so you have to use a data type like SPRAS, if the system gets confuse I believe you need a routine to translate the language symbols from 2 char to 1 char.
In R3 there're the table T002: here it can find both symbols: 1 char and 2 char.
U can use the fm CONVERSION_EXIT_ISOLA_INPUT for translation:
DATA: LANGUAGE_IN(2),
      LANGUAGE_OUT(1).
CALL FUNCTION 'CONVERSION_EXIT_ISOLA_INPUT'
     EXPORTING
          INPUT            = LANGUAGE_IN
     IMPORTING
          OUTPUT           = LANGUAGE_OUT
     EXCEPTIONS
          UNKNOWN_LANGUAGE = 1
          OTHERS           = 2.
Max

Custom Data Type Problem

Hi,
Im just starting in corba so his might be something simple, anyway..
Im adapting the HelloWorld example. And in my idl interface I want to use a custom custom data type named SongPreview. I have a class file for this in the same directory as my java code.
module HelloApp
interface Hello
string sayHello();
SongPreview getFile(in String name);
The problem is that I get an error saying that SongPreview is an undeclared type.
Any idea what im doing wrong?
Thanks

Just like any other language you have to define the return
type. In this case, it is SongPreview.
You must define SongPreview in IDL.
You could do it in the same IDL file or in another IDL.
But you MUST define in IDL.
====================================
Hi,
Im just starting in corba so his might be something
simple, anyway..
Im adapting the HelloWorld example. And in my idl
interface I want to use a custom custom data type
named SongPreview. I have a class file for this in the
same directory as my java code.
module HelloApp
interface Hello
string sayHello();
SongPreview getFile(in String name);
The problem is that I get an error saying that
SongPreview is an undeclared type.
Any idea what im doing wrong?
Thanks

Xml data output problem

I have table xxemp(No number, Text varchar2(250)), i have created a report and generate xml file and create temple and load data and insert all
field and when i preview the data in rtf formate at that movement data is not shown in the text field not display.In text field content 3 line of data
Thanks
837

please make sure, your xml data file has some data in it. and when the rtf is made view the output their itself.
let me know the steps you have followed.
Thanks
Ud.

XML data type problem

Similar Messages

Maybe you are looking for