XML Gateway - Hub Definition Password - Special Characters

Our Marketplace provider is about implement mandatory special characters in the hub access user accounts. Our current configuration does not allow special characters in the hub definition.
It there anyway to enter any symbol in the XML Gateway>Hub Definition>Password field.
1) Are there any symbols that are not deemed "Special Characters", I have tried various without success.
2) Can the password type be changes to allow symbols?
Any help welcomed,
Simon
Swansea
UK

Actually this is the right forum to be in
There are a few steps you need to do to configure BPEL with XML Gateway. This is what you did in 11i, may have changed for R12
Here are the steps to setup BPEL output
1. Choose responsibility 'XML Gateway' from left panel.
2. From right panel choose 'Define Lookup Values' . Oracle forms application would open up.
3. On XML Gateway Lookups form , press F11.
4. In 'Type' field enter 'COMM_METHOD'(without quotes.
5. Press CTRL+F11 . Form would fill from already present look ups. We are going to create new Lookup Value.
6. On new row create look up as (Values without quotes) :
- Code = 'BPEL'
- Meaning = 'BPEL'
- Description = 'Used for Apps Adapter Integration using BPEL'
- Check 'Enabled' checkbox.
7. Save form from File--> Save from menu bar. you can close this form.
8. XML Gateway Navigator form would be presented.
9. From right panel choose 'Define Trading Partners' .
10. On Trading Partner Setup form , press F11 .
11. In field 'Trading Partner Type' enter 'Supplier (without quotes).
12. In field 'Trading Partner Name' enter ‘VENDOR-1' (without quotes).
13. Go to Trading partner details and create new transaction as (Values without quotes)
- Connection/Hub = 'DIRECT'
- Protocol Type = 'BPEL'
- Protocol Address = 'http://appsadapter.sample.com'
cheers
James

Similar Messages

File XML Content Conversion: Problem with special characters

Hello,
in a file sender cc content conversion is used to transform a flat structure to XML. What we experiencecd is that the message mapping failed due to a character that was not allowed in XML:
I was assuming that the file content conversion just creates XML messages with allowed characters. Is there any way to configure content conversion to remove control characters which are not allowed in XML? Unfortunately the sender system cannot be modified.
Thank you.

Hi Florian,
Please use this UDF to remove special characters which prevent XML messages to form properly.
public static String removeSpecialChar(String s)
          try
               s=s.replaceAll("&","& amp ;");
               s=s.replaceAll("<" , " & lt ;");
               s=s.replaceAll(">", "& gt ;");
               s=s.replaceAll("'", "& apos ;");
               s=s.replaceAll("\"", "& quot ;");
          catch(Exception e)
               e.printStackTrace();
          return s;
Please remove spaces between characters within double quotes. I have added them because otherwise you can't see this code properly. Please check this below link , please replace the characters with proper values as the display is causing a problem here
http://support.microsoft.com/kb/316063
regards
Anupam
Edited by: anupamsap on Jul 7, 2011 4:22 PM
Edited by: anupamsap on Jul 7, 2011 4:23 PM

PDS - XML format, unable to read special characters in a string.

Hi All,
I've been using XML files to create my report with Oracle9i's new featue of PDS.
Now, I'm unable to read a file if it contains '&' or '<' in the string. In fact, the xml file itself not able to crate a xml page in the browser, if these special characters are present.
Is there any way to solve this problem ?
I can't tell the users to remove &, < from the description data. Is there any way to workaround for this ?
Thanks in advance,
Satya.

Hi Rohit and Rajesh
Thanks for your reply.
In fact, my problem is like this:
I'll get data in .txt file and save that as a .xml file in the network before calling Oracle report ,which gets data from the .xml.
The contents are like this:
<Comapy name> Ford Motors UK & Europe</Company name>
<Department> HR & Pensions</Depatrment>
<Salary>Grad4 < 25000 </Salary>
As per XML entity character representation, I need to replace '&' with '&' and '<' with '<lt;'
I'm wondering is there any other way to solve this problem as it is difficult to replace '<' and '>' generically.
Honestly, I couldn't understand what Mr. Rajesh was trying to tell.
'for & use & ( with semicolon at the end)'
'for < use <'
'for > use >'
Can you shed some light on this ?
Many thanks
Satya.

XML to PCL: Problem with special characters, entity referenceses, etc.

I (an XML beginner) am trying to produce PCL (escape sequences, you know) documents from XML using the PL/SQL parser and I'm having the following problems:
1. I need the escape character either in the XSL file, or in the XML, but this results in the error:
Error occurred while parsing: Invalid char in text.
2. I also need the character &. I tried to use the entity reference for & but the result was that it's converted to ampersand-#-38; (without the hyphens, of course) in the parsed file.
3. I have to use characters from the German alphabet (umlauts) but it seems that I'm not the only one who doesn't like them! I tried changing the encoding (ISO-8859-1 or -2) in my XSL file but the error is always:
Error occurred while parsing: 6-byte UTF8 encoding not supported.
How can I get all these characters in the result file?
Thanks for any info on the subject!

I am having this same trouble. I want to have an XML document that has ISO-8859-1 encoding that contains an (ampersand)amp; character entity. When I apply XSL to this, I want the (ampersand)amp; entity to remain intact. Instead it is converted to (ampersand)#38; Please let me know if you find an answer to this problem. [email protected]
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Penn ([email protected]):
I (an XML beginner) am trying to produce PCL (escape sequences, you know) documents from XML using the PL/SQL parser and I'm having the following problems:
1. I need the escape character either in the XSL file, or in the XML, but this results in the error:
Error occurred while parsing: Invalid char in text.
2. I also need the character &. I tried to use the entity reference for & but the result was that it's converted to ampersand-#-38; (without the hyphens, of course) in the parsed file.
3. I have to use characters from the German alphabet (umlauts) but it seems that I'm not the only one who doesn't like them! I tried changing the encoding (ISO-8859-1 or -2) in my XSL file but the error is always:
Error occurred while parsing: 6-byte UTF8 encoding not supported.
How can I get all these characters in the result file?
Thanks for any info on the subject!<HR></BLOCKQUOTE>
null

Password/special characters policy for creating a new user in Solaris

Hi,
Please anyone can advise me on the following issue ?
I tried to reinforce a new policy in the Solaris box, where when a new user is create, it should include minimum 1 or 2 numeric character, example
useradd testing <<<<<<<<<<<<<< not allowd
useradd testing123 <<<<<<<<<<<<<< Okay
My /etc/defautl/passwd
MINALPHA=4
MINDIFF=7
MINDIGIT=1
MINSPECIAL=1
MINUPPER=2
MINLOWER=2
MAXREPEATS=1
WHITESPACE=YES
NAMECHECK=YES
DICTIONDBDIR=/var/passwd
DICTIONLIST=/usr/share/lib/dict/words
HISTORY=12
MINWEEKS=NONE
MAXWEEKS=4
WARNWEEKS=NONE
PASSLENGTH=8

You might want to write an local account creation script which checks that account names comply with your policy before executing useradd to actually create the account. Tell your staff to use that script to create new accounts instead of using useradd directly. Of course, it could also check other aspects of your local policy as well.

Preserving XML "special" characters in output

I've got a valid XML document that may contain special characters, such as ampersands. These characters are properly escaped in the document (i.e., + is represented as amp; ). When I parse this document (using either the Java V2 parser or the PL/SQL parser) and then retrieve the values from a DOM using getNodeValue, I get the un-escaped version () and I need the escaped version (+amp;) so that I can store it in a database and load it back into a DOM at a later date.
What am I missing here? Is there a property on the parser/DOM that I can set so that the characters are not translated on output.
Thanks
mark
Note: I've used + in the above example instead of the ampersand character because of the vagaries of my browser, but the character in the XML document is a proper ampersand!

The DOM is not required to escape the characters, so it is correct that you get the literal ampersand characters when you ask the DOM for a getNodeValue().
When an XML document is serialized -- using, for example, the XMLDocument.print() method -- it is when this external form of the document is produced that escaping occurs.
You can always call XMLNode.print() to serialize the value of a node and it's children into a PrintWriter that wraps a StringWriter to get the string equivalent of the properly escaped values.

Parsing Special Characters in XML

Hi,
I have an incoming XML snippet that has the special characters already escaped.
If the Title is something like kkkkk ?& [] ]]> XML comes back escaped for & and >
<title><kkkkk ? & [] ]]></title>
Now I would like parse this ESCAPED Title correctly that should result in
<![CDATA[kkkkk ?& [] ]]>]]>
BUT INSTEAD I just get
<![CDATA[>]]>
What is it that I am missing?
Thank you so much.
Meena

A CDATA section can not contain the string "]]>" because that string is used to identify the end of CDATA section. Try removing the additional "]]>" and try if it works good for the rest of the data within the CDATA section.

Special characters in XML structure when prepared using String

Hi,
   I am preparing an XML structure using 'String'. I print the prepared XML structure in the server log. Issue is that I am seeing extra characters([[ and ]]) that I am not printing.
Please let me know how to get rid of those.
Code Excerpt
        String xmlHeader = "<?xml version=\"1.0\" encoding=\"utf-8\" ?>";
        String lsb_xmlcon = xmlHeader;
        logger.info("ReqXMLString Process 1 --->" + lsb_xmlcon);
        lsb_xmlcon = lsb_xmlcon +("\n");
        logger.info("ReqXMLString Process 1.1 --->" + lsb_xmlcon);
        lsb_xmlcon = lsb_xmlcon +("<REQUEST>");
        lsb_xmlcon = lsb_xmlcon +("\n");
        logger.info("ReqXMLString Process 1.2 --->" + lsb_xmlcon);
Log
ReqXMLString Process 1 ---><?xml version="1.0" encoding="utf-8" ?>
ReqXMLString Process 1.1 ---><?xml version="1.0" encoding="utf-8" ?>[[
ReqXMLString Process 1.2 ---><?xml version="1.0" encoding="utf-8" ?>[[
<REQUEST>
Thanks,
Message was edited by: 996913
This issue is observed only while running the code in server, not from Jdev.
When we append the additional tags without new line character, "\n", there are no extra characters being added. Also, in other case also. where we used "Marshaller" to prepare the XML, we have seen this issue.
After we set the below property to false, we got rid of the extra characters.
                        jaxbMarshaller.setProperty(Marshaller.JAXB_FORMATTED_OUTPUT, false);
Apparently the insertion of new line when the code runs on server(Weblogic 10.3.6.0) is creating the issue.
Please let me know if anyone has come across a similar scenario.
Thanks,

I am building this XML in a servlet so ,right, DOM does process XML (even though a valid HTML file can be loaded into a DOM object) but if you build XML using DOM then write the XML out using PrintWriter and Transformer objects this will cause the XML to print out in your browser. If you view source on this XML you will see that the DOM object has translated all special characters to there &xxxx; equivalent. For a example: when the string (I know "cool" java) gets loaded into a attribute using the DOM object then wrote back out it looks like (I know &xxx;cool&xxx; java) if you view the source in your browser. This is what it should do, but the DOM object is not change the � to the "&xxxxx;". This servlet is acting as a gateway between a Java API and a windows asp. The asp will call the servlet expecting to get XML back and load it directly into a DOM object. When the windows DOM object gets the xml that I am returning in this servlet is throws a exception "invalid character" because the � was not translated to &xxxx; like the other characters were. According to the book HTML 4 in 24 hours (and other references) the eacute; or #233; are how you say "�" in HTML or XML. How do you say it?

Special characters in XML built using the DOM object

I am using the DOM object to build xml but I am having problems with special characters. I have a Element object that I create attributes in. Most special characters like the &, ", or ' are translated for me (amp; quot;, acute; put a & in front of those, if I do it here the browser will translate them into the logical character) but I am having a problem with the � character. The DOM object does not translate this. If I do it my self to(eacute; same here add a & in front) before adding the string to the attribute then the DOM object translates it to (amp;eacute; add a & in front of the amp; not in front of the eacute;). As you can see the DOM object translates the & instead of recognizing that it is a HTML character. Can anyone give me a hand?

I am building this XML in a servlet so ,right, DOM does process XML (even though a valid HTML file can be loaded into a DOM object) but if you build XML using DOM then write the XML out using PrintWriter and Transformer objects this will cause the XML to print out in your browser. If you view source on this XML you will see that the DOM object has translated all special characters to there &xxxx; equivalent. For a example: when the string (I know "cool" java) gets loaded into a attribute using the DOM object then wrote back out it looks like (I know &xxx;cool&xxx; java) if you view the source in your browser. This is what it should do, but the DOM object is not change the � to the "&xxxxx;". This servlet is acting as a gateway between a Java API and a windows asp. The asp will call the servlet expecting to get XML back and load it directly into a DOM object. When the windows DOM object gets the xml that I am returning in this servlet is throws a exception "invalid character" because the � was not translated to &xxxx; like the other characters were. According to the book HTML 4 in 24 hours (and other references) the eacute; or #233; are how you say "�" in HTML or XML. How do you say it?

XML Publisher report not printing excel output due to special characters

Hello,
I am trying to create a xml publisher report which should display the output in excel. But the program completes with a warning status and the output is displayed as XML instead of excel, with some errors "An invalid character was found in text content. Error processing resource " and i think these errors are due to the special characters(eg: city/province - A Coruña, Cáceres). If i give rownum < 10 in my query, where there are no such characters it works fine and i am getting an excel output.
Tried changing the XML encoding and it doesn't help (both mentioned below)
<?xml version="1.0" encoding="ISO-8859-1"?>
<?xml version="1.0" encoding="UTF-8"?>
Do anyone have a solution for this
Thanks in advance
Edited by: user10317098 on Jan 16, 2012 10:58 AM

Hi,
Check this links that might help you..
https://forums.oracle.com/thread/1018488
http://docs.oracle.com/cd/E10091_01/doc/bip.1013/e05000/toc.htm
Here the Exact solution from Oracle
In the XML PUBLISHER ADMINISTRATOR Resp..
Click the administration..
then Click HTML Output
Then in the Base Image URI Give the url of your application for example
http://Test.Test.com:8000/OA_MEDIA/
And then
Image File Directory give this as per your application setup
/u01/app/oracle/apps/apps_st/comn/java/classes/oracle/apps/media/
Thanks & Regards
Srikkanth.M

FindNode returning Null And XML Not Accepting Special Characters

Hi All,
i am trying the get the attribute value in the element "ns4:InfoCFDi" using FindNode method, but the method is returning NULL. I used the same code for other sample as well and was successfull. but for this specific XML file(which is below) I am getting a Null.
i can get till S:Body, but when i try to use FindNode for ":Body/s4:ResponseGeneraCFDi" I get Null value.
And I used "S:Body/*[local-name()=" | "ns4:ResponseGeneraCFDi" | "]";
as mentioned in other post but still no success.
==>I Have one more question relating to special characters. I need to use characters such as - ó in my XML to read as well as write. When I try to read i am getting XML parse error and when writing, i cannot open the file properly.
Your help is much appreciated.
My code is here:
Local XmlDoc &inXMLDoc, &reqxmldoc;
Local XmlNode &RecordNode;
&inXMLDoc = CreateXmlDoc();
&ret = &inXMLDoc.ParseXmlFromURL("D:\Agnel\Mexico Debit Memo\REALRESPONSE.xml");
If &ret Then
&RecordNode = &inXMLDoc.DocumentElement.FindNode("" );
If &RecordNode.IsNull Then
Warning MsgGet(0, 0, "Agnel FindNode not found.");
rem MessageBox(0, "", 0, 0, "FindNode not found");
Else
&qrValue = &RecordNode.GetAttributeValue("asignaFolio ");
Warning MsgGet(0, 0, "asignaFolio." | &qrValue);
End-If;
Else
Warning MsgGet(0, 0, "Error. ParseXmlString");
End-If;
XML File:
- <S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
- <S:Body>
- <ns4:ResponseGeneraCFDi xmlns="http://www.xxl.com/ns/xsd/bf/rxx/52" xmlns:ns2="http://www.sat.gob.mx/cfd/3" xmlns:ns3="http://www.xx/ns/bf/conector/1&quo t; xmlns:ns4="http://www.xx/ns/xsd/bfxx/xx/32&qu ot; xmlns:ns5="http://www.xxcom/ns/xsd/bf/xxxxx&q uot; xmlns:ns6="http://wwwxx.com/ns/referenceID/v1">
- <ns3:Result version="1">
<ns3:Message message="Proceso realizado con exito." code="0" />
</ns3:Result>
- <ns4:InfoCFDi noCertificadoSAT="20001000000100003992" refId="STORFAC20121022085611" fechaTimbrado="2012-10-22T08:56:45" qr=" "
uuid="a37a7d92-a17e-49f4-8e4d-51c983587acb" version="3.2" tipo="XML" archivo="xxx" sello="B8WjuhYLouSZJ6LU2EjxZ0a4IKyIENZNBx4Lb4 jkcAk6wA+EM477yz91/iDdsON0jm8xibBfom5hvHsH7ZK1ps3NnAXWr1LW 7ctmGsvYKAMvkCx/yOVzJTKFM2hN+OqCTE0WVfgv690vVy2CDQWKlMxbK+3idwG4t OKCMelrN9c=" fecha="2012-10-22T08:56:44" folio="281" serie="IICC">
<InfoEspecial valor="Este documento es una representacin impresa de un CFDI." atributo="leyendaImpresion" />
<InfoEspecial valor="||1.0|a37a7d92-a17e-49f4-8e4d-51c983587acb|2012-10-22T08:56:45|B8WjuhYLouSZJ6LU2EjxZ0a4IKyIENZNBx4Lb4 jkcAk6wA+EM477yz91/iDdsON0jm8xibBfom5hvHsH7ZK1ps3NnAXWr1LW 7ctmGsvYKAMvkCx/yOVzJTKFM2hN+OqCTE0WVfgv690vVy2CDQWKlMxbK+3idwG4t OKCMelrN9c=|20001000000100003992||" atributo="cadenaOriginal" />
<InfoEspecial valor="Doscientos dieciocho mil cuatrocientos setenta y cinco pesos 00/100 M.N." atributo="totalConLetra" />
</ns4:InfoCFDi>
</ns4:ResponseGeneraCFDi>
</S:Body>
</S:Envelope>
TIA

First of all you have to supply a value you want to search for and this has to be the complete path to the value. You're saying you already tried that, but can you paste the code which you used for that? I don't see the path mentioned in the code you posted.
*FindNode*
Syntax
FindNode(Path)
Description
Use the FindNode method to return a reference to an XmlNode.
The path is specified as the list of tag names, to the node that you want to find, each separated by a slash (/).
Parameters
Path
Specify the tag names up to and including the name of the node that you want returned, starting with a slash and each separated by a slash (/). This is known as the XPath query language.>
Another option would be this snippet of code:
&InfoCFDiArray = GetElementsByTagName("ns4:InfoCFDi");
&InfoCFDiNode = &InfoCFDiArray [1];
&attValue = &InfoCFDiNode.GetAttributeValue("noCertificadoSAT")
Warning(&attValue);
It creates an array of XML Nodes which match the name "ns4:InfoCFDi". Since there's only one in the XML it's safe to assume it will be the one and only node in the array. I've assigned that node to the variable &InfoCFDiNode and use that to retrieve the attribute "noCertificadoSAT" value. The warning message should display the value supplied there.
Concering the special characters; you will have to change the encoding of the XML. Peoplecode sets this to UTF-8 by default, but doesn't include this in the header. There's a little hack for that somewhere on the web, I'll see if I can find it.

Unable to call report from jsp - password contains special characters

Hi
I used the following url to call my oracle report from my JSP webpage but got the error mentioned below. It seems that this error occurs when i use the login id with password that contains special characters only. How can I overcome this problem?
Any help appreciated. Thx.
Regards,
Siti
URL used: -
"http://pc-325:8889/reports/rwservlet?server=pc-325&report=prodeff80120i&P_JDBCPDS="+vlogin1+"&destype=cache&desformat=pdf&paramform=no&p_type="+p_type;
Error encountered: -
REP-163: Invalid value for keyword DESTYPE.
Valid options are FILE, PRINTER, MAIL, INTEROFFICE, or CACHE.

Hi Stefan,
Many of the customers are located in hungary and they have created the userid using their keyboard. Hence for now I already have a userid with that hungarian characters, in the SAP system.
Only I would request for the help on how to interface these characters in SAP Business connector to call RFC.
Thanks,

Special characters in xml

Hello!
I am trying to generate XML from database by using fnd_file package. Trouble is that application NLS_LANG is not set to UTF8 and it should stay so due to the fact that a lot of custom reports written using Oracle Reports may not display special characters correctly. So i have problem with characters like 'ö','ļ'.... Is there a way to set encoding for only XML output? Also in my last efforts the output XML for some reason is concatenating a strange square shaped character into the end of file. Has anybody seen similar problem and maybe solved it?
Thanks
Aleksei

Refer to
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/JAXPSAX6.html

Special Characters in XML Publisher PDF Output

Hi,
I'm printing "Long Text" in report output in every line based on tab.
Report output is having special characters like \n.
I was using below to print in next line, any suggestions for removing \n.
Below is what was happening:
===================
RDF:
=====
lv_notes := replace(:CF_LONG_TEXT_DESC, chr(9), ' ') ;
lv_notes1 := replace(lv_notes, chr(10), ' ') ;
lv_notes2 := replace(lv_notes1, chr(13), ' ') ;
XML
===
<CF_LONG_TEXT_desc>
Initial Billing Amount: $549,180.00 \n \n Computation: \n a) Estimated Number of Full-Time Students: 12,000 \n
b) Estimated Number of Calendar Days: 113 \n
c) Calendar Date (From - To): 1/18/2011 - 5/10/2011 \n
d) Multiply by: $0.81 \n
e) Estimated Total Costs: $1,098,360.00 \n
f) Initial Billing Amount represents 50% of Estimated Total Costs. \n
\n \n
If you have questions about your invoice please contact Darud Akbar at (312) 681-2724.
</CF_LONG_TEXT_desc>
PDF Output
==========
Initial Billing Amount: $549,180.00 \n \n Computation: \n a) Estimated Number of Full-Time Students: 12,000 \n
b) Estimated Number of Calendar Days: 113 \n
c) Calendar Date (From - To): 1/18/2011 - 5/10/2011 \n
d) Multiply by: $0.81 \n
e) Estimated Total Costs: $1,098,360.00 \n
f) Initial Billing Amount represents 50% of Estimated Total Costs. \n
\n \n
If you have questions about your invoice please contact Darud Akbar at (312) 681-2724.
Thanks.

>
Initial Value
=======
<?CF_LONG_TEXT_desc?>
Changed to (Below gives me error)
========
<?<xsl:value-of select="translate(CF_LONG_TEXT_desc,'\n','')"/>?>
Changed to (Below doesn't fetch data)
========
<xsl:value-of select="translate(CF_LONG_TEXT_desc,'\n','')"/>
>
must be in field as
<xsl:value-of select="translate(CF_LONG_TEXT_desc,'\n','')"/>

How to remove special characters in xml

Dear friends,
How to remove the special character from the xml. I am placing the xml file and fetching through file adapter.
The problem is when there is any special character in xml. i am not able to pass to target system smoothly.
Customer asking schedule the file adapter in order to do that the source xml should not have any special charatcters
How to acheive this friends,
Thanx in advance.
Take care

Hi Karthik,
Go throgh the following links how to handle special character
https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/9420 [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42
Restricting special characters in XML within XI..
Regards
Goli Sridhar

XML Gateway - Hub Definition Password - Special Characters

Similar Messages

Maybe you are looking for