XML PrintSelectedInvoices completes with warning when run as child request

Hi Friends,
I have converted the print selected invoices to xml and it runs fine when run by itself through SRS but it fails when it is submitted as a child request ( when it gets run as a child request when Invoice import and print program is run). Here is the problem:
1)When request is submitted, through SRS it passes fine and while submitting I find the template name,template language in theoptions button: Upon completion �Window:(UNDER LAYOUT section)
2)BUT When request is submitted as child request it fails and while submitting this; Ifind that there is no information in the layout section in the options: Uponcompletion �Window:(UNDER LAYOUT SECTION).You will see that there is notemplate name,template language etc. and details picked in the Upon Completionwindow under OPTIONS buton in SRS.
Also the error in the log file is as follows:
Printing output file.
Request ID : 41921527
Number of copies : 1
Printer : 11111
Error: May not be a PDF file (continuing anyway)
Error (0): PDF file is damaged - attempting to reconstruct xref table...
Error: Couldn't find trailer dictionary
Error: Couldn't read xref table
Pasta: Error: Preprocess failed. Command=/usr/testinstance/temp/pasta13459_0.tmp /n00/common/testinstance/temp/pasta13459_1.tmp
Pasta: Error: Preprocess or Print command failed!!!
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Regards
Ray

Similar Messages

Oracle Apps.XML reports ending with warning when the report output contains

Hi I have XML reports. When we run these reports as concurrent program through Oracle Apps. window and if the report output contains special characters(like Chineese data) in between of English, then the concurrent program is ending with warning. If we remove special characters then it is working fine or when we run the report query directly from backend it is working fine.
We are importing this data from legacy system into oracle apps. and we can't control these characters or decode them with some other charactes.
Can any one guide me how to get the XML report output with special characters.
Thanks in advance.
Chandra Babu Lankipalli.

Hi Hussein,
The concurrent program is ending with Warning. It is unable to publish output file.
For the same when we remove special characters and run the program it is completing and generating the
output. The log fine is as follows when the data file contains special characters.
Custom Application: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXFA_AR_WIN_EXCEPTION module: XXFA AR Wintrack Customer Interface Exception Report
Current system time is 23-MAR-2009 05:33:19
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_CUST_ERRORED='3'
P_CUST_SUCCESS='0'
P_CUST_TOTAL='3'
P_REQUEST_ID='4661283'
P_USER_NAME='SYSADMIN'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
/d01/oracle/fadevora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /d01/oracle/fadevora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Report Builder: Release 6.0.8.25.0 - Production on Mon Mar 23 05:33:19 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 4661284 on node FAHQSNA01SFTD03 at 23-MAR-2009 05:33:20.
Post-processing of request 4661284 failed at 23-MAR-2009 05:33:21 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT -------------
Not printing the output of this request because post-processing failed.
Finished executing request completion options.
Concurrent request completed
Current system time is 23-MAR-2009 05:33:21
Thanks in advance.
Chandra

Pick release runs completes with warning

Hi ,
I ran the pick release for a sales Order the status of which says awaiting shipping . It completes with warning but no lines are pick released
I checked there are no subinventories mentioned in the Sales Order Line
sheduled ship date is of Oct and Nov
I ran the pick release from release sales order form
Removed the scheduled ship dates and requested dates
Pick from Subinventory was left blank so was release criteria subinvetory
but stage subinventory defaulted from shipping paramenters
This subinvemtory has locator control as prespecified so I entered a locator in the release sales order form
Checked the item item attributes
Tried all possible combinations by putting pick from subinventory and locator and leaving it blank but still it would not pick release in the transaction screen it says next step pick release.
Any idea ?
Regards
Vinay

975796 wrote:
Dear All,
when i try to pick the lines in standard SO, pick slip report completes with warning.
i tried existing solutions in metalink, but not resolved.
can any one help me in resolving in this issue.Please post the details of the application release, database version and OS along with the contents of the concurrent request log file.
Thanks,
Hussein

Post-processing actions failed (Report Completed with Warning Status)

Hi Friends,
I'm developing custom PO Report using XMLP 5.0.0. Preview Of Template is coming properly while running the report , it completed with Warning Status.The Report is not working in UAT while it was passed DEV and TEST Env successfully. Please look at the below log details and help me
------------- 1) PUBLISH -------------
Beginning post-processing of request 654357 on node GOLDBQ at 20-JUN-2007 08:07:22.
Post-processing of request 654357 failed at 20-JUN-2007 08:07:32 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT   -------------
OPP Log Details
[6/20/07 10:22:04 AM] [OPPServiceThread1] Post-processing request 654539.
[6/20/07 10:22:05 AM] [3039:RT654539] Executing post-processing actions for request 654539.
[6/20/07 10:22:06 AM] [3039:RT654539] Starting XML Publisher post-processing action.
[6/20/07 10:22:06 AM] [3039:RT654539]
Template code: XXTCPOXPRPOPG
Template app: XXTC
Language: en
Territory: GB
Output type: PDF
[6/20/07 10:22:07 AM] [UNEXPECTED] [3039:RT654539] java.sql.SQLException: Non supported SQL92 token at position: 1:
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java(Compiled Code))
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java(Inlined Compiled Code))
     at oracle.jdbc.dbaccess.DBError.check_error(DBError.java(Inlined Compiled Code))
     at oracle.jdbc.driver.OracleSql.handleToken(OracleSql.java(Compiled Code))
     at oracle.jdbc.driver.OracleSql.handleODBC(OracleSql.java(Compiled Code))
     at oracle.jdbc.driver.OracleSql.parse(OracleSql.java(Inlined Compiled Code))
     at oracle.jdbc.driver.OracleConnection.nativeSQL(OracleConnection.java(Compiled Code))
     at oracle.jdbc.driver.OracleStatement.expandSqlEscapes(OracleStatement.java(Inlined Compiled Code))
     at oracle.jdbc.driver.OracleStatement.parseSqlKind(OracleStatement.java(Inlined Compiled Code))
     at oracle.jdbc.driver.OraclePreparedStatement.<init>(OraclePreparedStatement.java(Compiled Code))
     at oracle.jdbc.driver.OracleCallableStatement.<init>(OracleCallableStatement.java(Inlined Compiled Code))
     at oracle.jdbc.driver.OracleCallableStatement.<init>(OracleCallableStatement.java(Inlined Compiled Code))
     at oracle.jdbc.driver.OracleConnection.privatePrepareCall(OracleConnection.java(Compiled Code))
     at oracle.jdbc.driver.OracleConnection.prepareCall(OracleConnection.java(Compiled Code))
     at oracle.apps.fnd.cp.util.RemoteFile.transferFile(RemoteFile.java:168)
     at oracle.apps.fnd.cp.util.RemoteFile.transfer(RemoteFile.java:127)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:208)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
[6/20/07 10:22:07 AM] [3039:RT654539] Completed post-processing actions for request 654539.
END Of OPP Log Details
Regards,
Aanta
Message was edited by:
user526601

HI ,
i am also facing the same problem but i have one solution for this .... that opp err
comes in 3 cases ....
data output will be very large
unable to insert data in template---->template design is wrong.....(in caseif xml is generated for that).
the third case is that the data defination file is perfectly fine but when it have to insert data in template its not getting the path where the template is put.
its all due to xml environment settings.
Tell your DBA to verify the issue...send him the log and opp log.
I expect that you will get what exactly the issues is.
regards
Ratnesh

Report "completed with warning "   APP-FND-00500: AFPPRN received a return

hi ,
i am getting this error while running a report.while searching on google i foundn it's printer issue but when i submit it with different printer name it running fine but it always completed with warning with that specific printer .so what should i do ?
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_ORG_ID='200'
P_PO_NO_FROM='9068'
P_PO_NO_TO='9068'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Report Builder: Release 6.0.8.25.0 - Production on Fri Dec 2 16:56:40 2011
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 6098208
Number of copies : 1
Printer : wkwcomm
wkwcomm: service-unavailable
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Action: Review your concurrent request log file for more detailed information.
Finished executing request completion options.

Please post the details of the application release, database version and OS.
i am getting this error while running a report.while searching on google i foundn it's printer issue but when i submit it with different printer name it running fine but it always completed with warning with that specific printer .so what should i do ?Is this a custom or seeded concurrent program?
Is the issue with this report only?
Is this output from the printer that the report complete successfully with warning?
Do you get an output file?
wkwcomm: service-unavailableIs wkwcomm the printer name (queue name)?
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1Apps Print Requests Fail with lp: unable to print file: client-error-not-found [ID 359890.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=APP-FND-00500&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001

Mailbox Move from 2010 to 2013 Completed with Warning and Stuck

I have been moving mailboxes from Exchange 2010 to Exchange 2013 and was on my last batch when all the mailboxes Completed except for one which Completed With Warning. It shows 0 bad items.
In Exchange 2010, all the mailboxes that are part of this failed batch show they are still in the Move Request state.
On the mailbox in Exchange 2013 Migration that shows Completed with Warning, the following details are provided:
Error:
MigrationPermanentException: Warning: Target mailbox unlock operation was not replicated. If a lossy failover occurs after the target mailbox was unlocked, the target mailbox could remain inaccessible. Error details: The process failed to get the correct
properties. --> MapiExceptionTimeout: Unable to get properties on object. ‎(hr=0x80040401, ec=-2147220479)‎ Diagnostic context:    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=342]    Lid: 43559
EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x80040401][length=178][latency=60009]    Lid: 32881   StoreEc: 0x80040401    Lid: 50035      Lid: 64625   StoreEc: 0x80040401
Lid: 52176   ClientVersion: 15.0.847.32    Lid: 50032   ServerVersion: 15.0.847.6032    Lid: 50128      Lid: 1494    ---- Remote Context Beg ----
Lid: 43632   StoreEc: 0x80040401    Lid: 42272   StoreEc: 0x80040401    Lid: 36392   dwParam: 0x1    Lid: 50904   StoreEc: 0x80040401    Lid: 35992
StoreEc: 0x80040401    Lid: 1750    ---- Remote Context End ----     Lid: 1494    ---- Remote Context Beg ----     Lid: 43632   StoreEc: 0x80040401
Lid: 42272   StoreEc: 0x80040401    Lid: 36392   dwParam: 0x1    Lid: 50904   StoreEc: 0x80040401    Lid: 35992   StoreEc: 0x80040401    Lid: 1750
---- Remote Context End ----     Lid: 50288      Lid: 23354   StoreEc: 0x80040401    Lid: 25913      Lid: 21817   ROP Failure: 0x80040401
Lid: 20385      Lid: 28577   StoreEc: 0x80040401    Lid: 32001      Lid: 29953   StoreEc: 0x80040401    Lid: 62128      Lid: 38144
StoreEc: 0x80040401
Report:
[email protected]
Any idea what steps to take to complete this move from here?
Thanks,
Brett Gibson
Brett Gibson

From the EMC on the Exchange 2013 (destination) I get:
DisplayName               StatusDetail              TotalMailboxSize
TotalArchiveSize         PercentComple
Jason Osborne             Completed                 6.029 GB (6,474,008,69...
100
Brent R. Holl             Completed                 4.102 GB (4,403,992,89...
100
Nathan Harsin             Completed                 3.321 GB (3,565,830,88...
100
Don Barrett               Completed                 11.1 GB (11,916,695,17...
100
Larry Michael             Completed                 3.705 GB (3,978,717,79...
100
Danyl Gonterman           Completed                 4.165 GB (4,471,791,08...
100
Jason Mullanix            Completed                 1.569 GB (1,684,906,68...
100
Eric Brown                Completed                 5.662 GB (6,079,329,50...
100
Nick Cacciola             Completed                 1.992 GB (2,139,080,78...
100
Dorothy M. Jones          Completed                 11.34 GB (12,181,530,1...
100
orders                    Completed                 3.632 GB (3,899,673,39...
100
Terrie Bumpus             Completed                 14.2 GB (15,249,956,21...
100
Sean Stepp                Completed                 2.55 GB (2,738,494,989...
100
Joshua Stolberg           Completed                 3.055 GB (3,280,581,92...
100
Josh Stremme              Completed                 2.571 GB (2,761,019,42...
100
Casey Jones               Completed                 1.614 GB (1,732,737,86...
100
Larry Gray                Completed                 2.545 GB (2,732,725,42...
100
Kelly Gray                Completed                 1.91 GB (2,050,883,915...
100
Bill Daugherty            Completed                 5.993 GB (6,434,784,87...
100
Laura Billstrom           Completed                 1.343 GB (1,442,466,39...
100
Adam Yates                Completed                 1.14 GB (1,224,119,328...
100
Eli Malooley              Completed                 606.8 MB (636,282,187 ...
100
Chad Ayers                Completed                 1.213 GB (1,302,645,29...
100
Nick Galvin               Completed                 815.9 MB (855,568,875 ...
100
Stephane Martin           Completed                 556.4 MB (583,443,766 ...
100
Todd Neal                 Completed                 222.5 MB (233,256,684 ...
100
Eric Botsford             Completed                 17.13 MB (17,962,734 b...
100
Archiving                 CompletedWithWarnings     138.6 GB (148,830,505,...
100
Running the same command on the source Exchange 2010 Server I get the following:
[PS] C:\Windows\system32>Get-MoveRequest |Get-MoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (0:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (1:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (2:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : F4AB2B5B,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (3:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (4:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (5:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 903CB5C9,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (6:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 903CB5C9,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (7:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (8:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (9:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (10:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (11:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (12:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 903CB5C9,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (13:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (14:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (15:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (16:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (17:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (18:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (19:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (20:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (21:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (22:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (23:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (24:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (25:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 903CB5C9,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (26:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
    + CategoryInfo          : ResourceUnavailable: (27:Int32) [Get-MoveRequestStatistics], AccessDeniedException
    + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Thanks,
Brett
Brett Gibson

Interface Trip Stop Completed with Warning

Hi All,
For a sales order the line has been shipped where as the line status is showning as Picked and the delivery status is closed with the next step is showing as "Run Interface". While I have submitted the Interface Trip Stop, it completed with warning. The log file says:
Shipping Execution: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
WSHINTERFACES module: Interface Trip Stop - SRS
Current system time is 20-APR-2009 07:31:03
**Starts**20-APR-2009 07:31:03
**Ends**20-APR-2009 07:31:03
Interface trip stop is completed with warning
Start of log messages from FND_FILE
Starting WSH Debugger ==> 04/20/2009 07:31:03 AM,Session ID=2850630
The following are the current Shipping related debug settings:
OM: Debug Level ==> 0
INV: Debug Level ==>
WSH: Debug Enabled ==> Yes
WSH: Debug File Prefix ==>
WSH: Debug Level ==> Statement
WSH: Debug Log Directory ==> /dtmp
WSH: Debug Module ==> %
Entering WSH_SHIP_CONFIRM_ACTIONS.INTERFACE_ALL_WRP (WSHDDSHB.pls 120.19.12010000.3) (04/20/2009 07:31:03 AM)
P_MODE ==> ALL
P_STOP_ID ==> is NULL
P_DELIVERY_ID ==> 2888
P_LOG_LEVEL ==> 1
p_organization_id ==> 381
p_num_requests ==> 1
p_stops_per_batch ==> 1
l_req_data ==>
Entering WSH_SHIP_CONFIRM_ACTIONS.INTERFACE_ALL (WSHDDSHB.pls 120.19.12010000.3) (04/20/2009 07:31:03 AM)
P_MODE ==> ALL
P_STOP_ID ==> is NULL
P_DELIVERY_ID ==> 2888
P_LOG_LEVEL ==> 1
p_organization_id ==> 381
p_stops_per_batch ==> 1
INTERFACETRIPSTOP: FINDING STOP FOR DELIVERY_ID 2888
l_stop_id ==> 3031
InterfaceTripStop: processing stop_id 3031 for INV OM DSNO
l_inv_interface ==> 1
l_om_interface ==> 1
l_dsno_interface ==> 1
l_interface_mode ==> INV OM DSNO
l_stop_id ==> 3031
l_override_wf ==> N
Ship to Deliver Workflow is enabled for one or more deliveries related to this Stop ==>
Ship to Deliver Workflow is enabled for one or more deliveries related to this S
top
Interface_All: skipping stop_id 3031
========================================================================
l_stops_count ==> 0
InterfaceTripStop: no stop is processed because no lines are eligble for interfa
cing.
errbuf ==> Interface trip stop is completed with warning
retcode ==> 1
l_completion_status ==> WARNING
Exiting WSH_SHIP_CONFIRM_ACTIONS.INTERFACE_ALL (04/20/2009 07:31:03 AM, .01 seconds)
Automatic clean up ==>
l_recs = 0 ==>
errbuf ==> Interface trip stop is completed with warning
retcode ==> 1
l_completion_status ==> NORMAL
Exiting WSH_SHIP_CONFIRM_ACTIONS.INTERFACE_ALL_WRP (04/20/2009 07:31:03 AM, .03 seconds)
************Summary of Shipping API Calls************
WSH_SHIP_CONFIRM_ACTIONS.INTERFACE_ALL_WRP : 1 calls : .03 seconds
WSH_SHIP_CONFIRM_ACTIONS.INTERFACE_ALL : 1 calls : .01 seconds
Thanks in advance for your help.
Regards,
Jyoti
Edited by: Jyoti.Mohanty on Apr 20, 2009 2:46 AM

Hi,
This problem is documented in 785934.1 (Metalink doc).
Summary of the solution is given below. Please make sure you read the above document to confirm that the solution applies to your environment.
1. Go into the responsibility: System Administrator.
2. Navigate to Profile > System.
3. Query the profile option 'WSH: Override Ship to Deliver Workflow' and set this value to 'Yes'
at the Site Level.
4. Retest the issue.
5. Migrate the solution as appropriate to other environments

Import Journal Completed with warning

Import Journal Completed with warning "no data found" but data exist in GL_INTERFACE against group_id
<< gllfss() 20-SEP-2010 10:02:23
gllcje() 20-SEP-2010 10:02:23
glluch() 20-SEP-2010 10:02:24<< glluch() 20-SEP-2010 10:02:24
LEZL0008: Found no interface records to process.
LEZL0009: Check SET_OF_BOOKS_ID, GROUP_ID, and USER_JE_SOURCE_NAME of interface records.
If no GROUP_ID is specified, then only data with no GROUP_ID will be retrieved. Note that most data
from the Oracle subledgers has a GROUP_ID, and will not be retrieved if no GROUP_ID is specified.
Pl suggest solution....

Journal Import can be classified as With specific group Id, All Group Ids and no Group Id.
Data from subledger will generally have group id. Try journal import run with selection criteria as "All Group ids". No group Id is used to import data without group id.
Regards,
Chirag

XML Reports completes in warning

Hi gurus,
I am having trouble our developer have made XML report and registered it when he is running the concurrent request is completing in warning (yellow color) and no output is generate and below is the log file for the concurrent request.
we never had any XML report in our environment this is the first time so do we need to do any setup for XML reports to generate fine ?
also where is OPP service log files location ?
Thanks
Regards,
HASSAN
General Ledger: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
GLTS module: GL_TRIAL BALANCE ACCOUNT WISE SUMMARY
Current system time is 22-OCT-2011 12:20:40
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_set_of_books_id='1001'
P_CHART_OF_ACCOUNTS_ID='30008'
p_company='001'
COMP2='001'
p_project='1101'
p_project_to='1101'
p_period='200612'
p_period_to='201112'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Enter Password:
Report Builder: Release 10.1.2.3.0 - Production on Sat Oct 22 12:20:42 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 785118 on node TEST at 22-OCT-2011 12:20:57.
Post-processing of request 785118 failed at 22-OCT-2011 12:20:58 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT -------------
Not printing the output of this request because post-processing failed.
Finished executing request completion options.
Concurrent request completed
Current system time is 22-OCT-2011 12:20:58
---------------------------------------------------------------------------

hassanksa wrote:
the desktop version of xml pub which our developer used for report development was not compatible with our apps
then i recommended developer with the correct version once he used the right one the reports worked fineThanks for the update and for sharing the solution!
Hussein

XML Reports end with WARNING Status, Using Virtual Hostname by Veritas HA

Dear Experts,
We have upgraded our Application from 11.5.10.2 to R12, 12.1.3. Now in the Upgraded Application we are unable to open/view any of the XML based Concurrent Reports. All the XML Concurrent Reports are ending in Status WARNING.
When we click on the View Out put, we are just getting the XML code and not the XML based reports.
The log file of Out Put Postprocessor shows the following errors:
================================================
5/28/13 12:40:20 PM] [STATEMENT] [960882:RT4152834] Get Output Type
[5/28/13 12:40:20 PM] [STATEMENT] [960882:RT4152834] XML file name: /mnt/oracle/ERPROD/inst/apps/ERPROD_erp-lh-dr/logs/appl/conc/out/o4152834.out
[5/28/13 12:40:20 PM] [STATEMENT] [960882:RT4152834] XML file is on node: ERP-LH-DR
[5/28/13 12:40:20 PM] [UNEXPECTED] [960882:RT4152834] java.sql.SQLException: Exhausted Resultset
at oracle.jdbc.driver.OracleResultSetImpl.getString(OracleResultSetImpl.java:1224)
at oracle.apps.fnd.cp.util.CpUtil.getCanonicalLocalNode(CpUtil.java:127)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:244)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)
[5/28/13 12:40:20 PM] [960882:RT4152834] Completed post-processing actions for request 4152834.
And error like below:
The error we are getting from the Application log files are related to Hostname. Following is the abstract from the Output Post Processor log.
[5/29/13 2:56:02 PM] [UNEXPECTED] [960900:RT4155505] java.sql.SQLException: Exhausted Resultset
at oracle.jdbc.driver.OracleResultSetImpl.getString(OracleResultSetImpl.java:1224)
at oracle.apps.fnd.cp.util.CpUtil.getCanonicalLocalNode(CpUtil.java:127)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:244)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)
===============================================================
Concurrent Manger Log files shows the following error:
===========================================================
Executing request completion options...
Output file size:
430455
------------- 1) PUBLISH -------------
Beginning post-processing of request 4158856 on node ERP-LH-DR at 30-MAY-2013 18:53:38.
Post-processing of request 4158856 failed at 30-MAY-2013 18:53:38 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT -------------
Not printing the output of this request because post-processing failed.
Finished executing request completion options.
Concurrent request completed
==========================================================
**Please suggests:**
**1- Is there any way to make these XML reports work with Veritas HA, using Virtual hostname**
**2- Can we identify or pin point from where the Out Put Postprocessor is setting the Physical Hostname.**
Regards
Ali Ammar

Hi,
The metalink note Output Post Processor Fails Due to java.sql.SQLException: Exhausted Resultset [ID 740529.1], is not related to us, we have already verified that. In our case the Application is running on Virtual Hostname and this virtual hostname is taken care by Veritas Library, ACC.
Secondly the FND_NODES also shows the Virtual hostname as the application is configured on Virtual Hostname. So in our case its not seems to be comming from the FND_NODES tables, rather it seems that some of the Java files/class is picking it by the OS command uname -a.
So if we can find that class or environment file of java, we can export the Virtual Hostname as we used it in configuration. Please note that the Concurrent Manager and Application listener are also working fine on the Virtual Hostname, by using the Veritas library.
Solaris:
LD_PRELOAD_32=/usr/lib/secure/libvuname.so
VHOSTNAME=<virtual hostname>
Please suggest.
Best Regards
Ali Ammar.

Xml report completing in warning...

Hello
I am developing a new xml report with out using report builder and when i run the report it is completing in warning and log file of the reprot is as below. I observed that report is fetching the data becuase I am seeing the data/xml tags in "Diagnostics--->View XML" . Anybody faced these type of issues before?
APP-FND-01564: ORACLE error 942 in publish
Cause: publish failed due to ORA-00942: table or view does not exist
ORA-06512: at "APPS.FND_CP_OPP_IPC", line 134
ORA-06512: at "APPS.FND_CP_OPP_REQ", line 251
ORA-06512: at "APPS.FND_CP_OPP_REQ", line 328
ORA-06512: at line 1.
The SQL statement being executed at the time of the error was: begin FND_CP_OPP_REQ.select_postprocessor(:node_name, :errcode, :requestid); end; and was executed from the file &ERRFILE.

Thanks Rutvi
Log file is as below:
Custom Account Receivable: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
GEPSPRGBILREC_DD module: GEPS Progress Billing to GL Reconciliation Report
Current system time is 21-JUN-2012 12:37:15
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_PERIOD_NAME='JUN-12'
P_SOB_ID='21'
P_REP_SOB_ID='9'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
/gpsescp1/erpapp/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /gpsescp1/erpapp/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
MSG-00100: DEBUG: AfterPForm_Trigger -
Report Builder: Release 6.0.8.28.0 - Production on Thu Jun 21 12:37:15 2012
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 60751035 on node TSGSP4101 at 21-JUN-2012 12:37:46.
Post-processing of request 60751035 failed at 21-JUN-2012 12:37:46 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT -------------
Not printing the output of this request because post-processing failed.
Finished executing request completion options.
Concurrent request completed
Current system time is 21-JUN-2012 12:37:46
2 Point) How can i get OPP CONCURRENT Responce time & OPP CONCURRENT Process time?
Thanks

XML Report completes with error due to REP-271504897: Unable to retrieve a string from the Report Builder message file.

We are in the middle of testing our R12 Upgrade. I am getting this error from the invoice XML-based report that we are using in R12. (based on log). Only for a specific invoice number that this error is appearing. The trace is not showing me anything. I don't know how to proceed on how to debug where the error is coming from and how to fix this. I found a patch 8339196 that shows exactly the same error number but however, I have to reproduce the error in another test instance before we apply the patch. I created exactly the same order and interface to AR and it doesnt generate an error. I even copied the order and interface to AR and it doesn't complete with error. It is only for this particular invoice that is having an issue and I need to get the root cause as to why. Please help. I appreciate what you all can contribute to identify and fix our issue. We have not faced this issue in R11i that we are maintaining right now for the same program which has been running for sometime. However, after the upgrade for this particular data that the user has created, it is throwing this error REP-271504897.
MSG-00100: DEBUG: Get_Country_Description Return value:
MSG-00100: DEBUG: Get_Country_Description Return value:
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-271504897:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-271504897: MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: AfterParam_Procs.Populate_Printing_Option
MSG-00100: DEBUG: AfterParam_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 117
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choi
Report Builder: Release 10.1.2.3.0 - Production on Tue Jul 23 09:56:46 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.

Hi,
Check on this note also : Purchasing Reports Fail When Changing Output To XML REP-0002 REP-271504897 REP-57054 (Doc ID 1452608.1)
If you cant reproduce the issue on other instance, apply the patch on the test instance and verify all the funcionality related to the patch works OK. Then move the patch to production. Or you can clone the prod environment to test the patch.
Regards,

XML Report completing in warning and not displaying output

Hi
XML report for particular period completing in warning, throwing error:
Beginning post-processing of request 60011540 on node TSGSD4901 at 03-JUL-2012 10:55:56.
Post-processing of request 60011540 failed at 03-JUL-2012 10:55:57 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Checked OPP logs:
Language: en
Territory: US
Output type: EXCEL
[6/20/12 3:07:01 PM] [UNEXPECTED] [1657868:RT60695905] java.lang.reflect.InvocationTargetException
     at sun.reflect.GeneratedMethodAccessor716.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:673)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:421)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:240)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:182)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1665)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:975)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5926)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3458)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3547)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:290)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
Caused by: oracle.xdo.parser.v2.XPathException: Cannot convert to number.
     at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1534)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:521)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:489)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:271)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:155)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:192)
     ... 17 more
But i am unable to trace . Appreciate your help!!!
Thanks

Thanks Rutvi
Log file is as below:
Custom Account Receivable: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
GEPSPRGBILREC_DD module: GEPS Progress Billing to GL Reconciliation Report
Current system time is 21-JUN-2012 12:37:15
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_PERIOD_NAME='JUN-12'
P_SOB_ID='21'
P_REP_SOB_ID='9'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
/gpsescp1/erpapp/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /gpsescp1/erpapp/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
MSG-00100: DEBUG: AfterPForm_Trigger -
Report Builder: Release 6.0.8.28.0 - Production on Thu Jun 21 12:37:15 2012
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 60751035 on node TSGSP4101 at 21-JUN-2012 12:37:46.
Post-processing of request 60751035 failed at 21-JUN-2012 12:37:46 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT   -------------
Not printing the output of this request because post-processing failed.
Finished executing request completion options.
Concurrent request completed
Current system time is 21-JUN-2012 12:37:46
2 Point) How can i get OPP CONCURRENT Responce time & OPP CONCURRENT Process time?
Thanks

Oracle XML Report Completes in Warning

Hi,
I have a report which has a column called Days Left which needs to be highlighted if the Days Left value is 3 or less than 3.
I have written the following code.
<?if:DAYS_LEFT<=3?><?if:CLOSE_FLAG='N'?><xsl:attribute xdofo:ctx="block" name="background-color">red</xsl:attribute><?end if?><?end if?>
But the report completes in Warning and gives no output.
Then I modified the code to :
<?if:DAYS_LEFT<='3'?><?if:CLOSE_FLAG='N'?><xsl:attribute xdofo:ctx="block" name="background-color">red</xsl:attribute><?end if?><?end if?>
then the report completes in Normal and gives output, but the Days Left are highlighted for Days Left values more than 3 also..
Please help me resolve this as soon as possible.
We have UAT lined up next week :(
Thanks
Abhilash

Hi All,
I tried to preview using Template Viewer and its giving me this error when Days_left = 3
[041813_093808967][oracle.apps.xdo.common.xml.XSLTWrapper][ERROR] XSL error:
<Line 68, Column 92>: XML-22036: (Error) Cannot convert to number.
[041813_093808967][oracle.apps.xdo.template.FOProcessor][ERROR] End Memory: max=247MB, total=66MB, free=22MB
End of Process.
Time: 0.172 sec.
FO Formatting failed.
Please help :(
Thanks
Abhilash

Having Problem With "static" When Running a Stand Alone Java Class

I have a Java class that recursively builds a 'tree' . This Java class works as I expected without problem. I am able to write out this 'tree" to the console "line by line" with proper indentation.
The problem occurs when I try to iterate through this 'tree' in the public static void main(String[] arg) method -- Each line in the tree is an Array. And I have to declare this Array (called titleArray in my code) non-static; otherwise, I end up with picking up the very last line of my hard-coded data.
Besides, I also have to declare the List (called recursiveTextArray in my code) non-static; otherwise, I end up with picking up the first Array that I ever build and run into endless iterations till the heap size is exhausted. Note that each element of that List is an Array object.
Then, this non-static Array and this non-static List cannot be accessed in the public static void main(String[] arg) method.
What should I do?
Here is my code that works without problem (the one I do not access the 'titleArray' in the main(String[] arg) method):
import java.util.Iterator;
import java.util.List;
import java.util.ArrayList;
import java.util.Date;
import java.awt.Color;
import com.aspose.words.*;
public class OplanPhase
     public static void main( String[] args)
          OplanPhase root = new OplanPhase( "", "Oplan 50XX - Phase I" );
          OplanPhase objective1 = new OplanPhase( "OO-3.1", "Destroy enemy conventional ground forces" );
          OplanPhase objective2 = new OplanPhase( "OO-3.2", "Destroy enemy conventional air forces" );
          OplanPhase objective3 = new OplanPhase( "OO-3.3", "Destroy enemy conventional naval forces" );
          OplanPhase objective4 = new OplanPhase( "OO-3.4", "Influence opposition groups within enemy areas to support friendly forces" );
          OplanPhase effect1 = new OplanPhase( "TgtObj-3.1", "Locate, identify, and destroy key enemy C2 nodes" );
          OplanPhase effect2 = new OplanPhase( "TgtObj-3.2", "Locate, identify, and destroy key enemy C2 nodes" );
          OplanPhase effect3 = new OplanPhase( "CFSOCC-3.2", "influence enemy opposition groups to support friendly forces campaign objectives" );
          OplanPhase effect4 = new OplanPhase( "JFMECC-3.3", "Destroy SLOC interdiction vessels" );
          OplanPhase effect5 = new OplanPhase( "CFSOCC-3.4", "Influence enemy opposition groups to support friendly forces campaign objectives" );
          OplanPhase moe1 = new OplanPhase( "MOE-TO-3.1", "Conduct surveillance to locate and identify key enemy C2 nodes" );
          OplanPhase moe2 = new OplanPhase( "MOE-JFSOC-3.1", "Degree of cooperative effort with area opposition groups" );
          OplanPhase moe3 = new OplanPhase( "MOE-JFSOC-3.2", "Number of combined missions successfully completed with opposition groups" );
          OplanPhase moe4 = new OplanPhase( "MOE-JFSOC-3.3", "Number of combined missions successfully completed with opposition groups" );
          OplanPhase task1 = new OplanPhase( "TASK-TO-3.1", "Destroy key enemy C2 nodes" );
          OplanPhase task2 = new OplanPhase( "TASK-TO-3.2", "Conduct surveillance to locate and identify key enemy C2 nodes" );
          OplanPhase task3 = new OplanPhase( "TASK-TO-3.3", "Destroy key enemy C2 nodes" );
          OplanPhase task4 = new OplanPhase( "TASK-JFSOC-3.1", "Degree of cooperative effort with area opposition groups" );
          root.addSubLevel( objective1 );
          root.addSubLevel( objective2 );
          root.addSubLevel( objective3 );
          root.addSubLevel( objective4 );
          objective1.addSubLevel( effect1 );
          objective2.addSubLevel( effect2 );
          objective2.addSubLevel( effect3 );
          objective3.addSubLevel( effect4 );
          objective4.addSubLevel( effect5 );
          effect1.addSubLevel( moe1 );
          effect1.addSubLevel( task1 );
          effect2.addSubLevel( task2 );
          effect2.addSubLevel( task3 );
          effect3.addSubLevel( moe2 );
          effect3.addSubLevel( moe3 );
          effect5.addSubLevel( task4 );
          effect5.addSubLevel( moe4 );
          root.outputAllWithIndentation( 0 );
     private String[] titleArray = { "", "", "" };
     private int indentation = 0;
     private List<OplanPhase> subLevels = new ArrayList<OplanPhase>();
     private List recursiveTextArray = new ArrayList();
     public OplanPhase( String foo, String bar )
          titleArray[1] = foo;
          titleArray[2] = bar;
     public void addSubLevel( OplanPhase op )
          subLevels.add( op );
     public void outputAllWithIndentation( int level )
          indentation = level;
          titleArray[0] = indentString( indentation );
         System.out.println( titleArray[0] + "[" + titleArray[1] + "] " + titleArray[2] );
         recursiveTextArray.add( titleArray );
          for ( int i = 0; i < subLevels.size(); i++ )
               ( ( OplanPhase )subLevels.get( i ) ).outputAllWithIndentation( level + 1 );
     private static String indentString( int count )
          String blank = "";
          for ( int i = 0; i < count; i++ )
               blank = blank.concat( "   " );
          return blank;
}And the code below gives me the static and non-static problem:
import java.util.Iterator;
import java.util.List;
import java.util.ArrayList;
import java.util.Date;
import java.awt.Color;
import com.aspose.words.*;
public class OplanPhase
     public static void main( String[] args)
          OplanPhase root = new OplanPhase( "", "Oplan 50XX - Phase I" );
          OplanPhase objective1 = new OplanPhase( "OO-3.1", "Destroy enemy conventional ground forces" );
          OplanPhase objective2 = new OplanPhase( "OO-3.2", "Destroy enemy conventional air forces" );
          OplanPhase objective3 = new OplanPhase( "OO-3.3", "Destroy enemy conventional naval forces" );
          OplanPhase objective4 = new OplanPhase( "OO-3.4", "Influence opposition groups within enemy areas to support friendly forces" );
          OplanPhase effect1 = new OplanPhase( "TgtObj-3.1", "Locate, identify, and destroy key enemy C2 nodes" );
          OplanPhase effect2 = new OplanPhase( "TgtObj-3.2", "Locate, identify, and destroy key enemy C2 nodes" );
          OplanPhase effect3 = new OplanPhase( "CFSOCC-3.2", "influence enemy opposition groups to support friendly forces campaign objectives" );
          OplanPhase effect4 = new OplanPhase( "JFMECC-3.3", "Destroy SLOC interdiction vessels" );
          OplanPhase effect5 = new OplanPhase( "CFSOCC-3.4", "Influence enemy opposition groups to support friendly forces campaign objectives" );
          OplanPhase moe1 = new OplanPhase( "MOE-TO-3.1", "Conduct surveillance to locate and identify key enemy C2 nodes" );
          OplanPhase moe2 = new OplanPhase( "MOE-JFSOC-3.1", "Degree of cooperative effort with area opposition groups" );
          OplanPhase moe3 = new OplanPhase( "MOE-JFSOC-3.2", "Number of combined missions successfully completed with opposition groups" );
          OplanPhase moe4 = new OplanPhase( "MOE-JFSOC-3.3", "Number of combined missions successfully completed with opposition groups" );
          OplanPhase task1 = new OplanPhase( "TASK-TO-3.1", "Destroy key enemy C2 nodes" );
          OplanPhase task2 = new OplanPhase( "TASK-TO-3.2", "Conduct surveillance to locate and identify key enemy C2 nodes" );
          OplanPhase task3 = new OplanPhase( "TASK-TO-3.3", "Destroy key enemy C2 nodes" );
          OplanPhase task4 = new OplanPhase( "TASK-JFSOC-3.1", "Degree of cooperative effort with area opposition groups" );
          root.addSubLevel( objective1 );
          root.addSubLevel( objective2 );
          root.addSubLevel( objective3 );
          root.addSubLevel( objective4 );
          objective1.addSubLevel( effect1 );
          objective2.addSubLevel( effect2 );
          objective2.addSubLevel( effect3 );
          objective3.addSubLevel( effect4 );
          objective4.addSubLevel( effect5 );
          effect1.addSubLevel( moe1 );
          effect1.addSubLevel( task1 );
          effect2.addSubLevel( task2 );
          effect2.addSubLevel( task3 );
          effect3.addSubLevel( moe2 );
          effect3.addSubLevel( moe3 );
          effect5.addSubLevel( task4 );
          effect5.addSubLevel( moe4 );
          root.outputAllWithIndentation( 0 );
          try
              Iterator it = recursiveTextArray.iterator(); //compilation error
              while ( it.hasNext() )
                   for ( int i=0; i<titleArray.length; i++ ) //compilation error
                        if ( i == 0 )
                             System.out.println( titleArray[0] ); //compilation error
                        } else if ( i == 1 )
                             System.out.println( "[" + titleArray[1] + "] " ); //compilation error
                        } else if ( i == 2 )
                             System.out.println( titleArray[2] ); //compilation error
          } catch (Exception e)
               // TODO Auto-generated catch block
               e.printStackTrace();
     private String[] titleArray = { "", "", "" };
     private int indentation = 0;
     private List<OplanPhase> subLevels = new ArrayList<OplanPhase>();
     private List recursiveTextArray = new ArrayList();
     public OplanPhase( String foo, String bar )
          titleArray[1] = foo;
          titleArray[2] = bar;
     public void addSubLevel( OplanPhase op )
          subLevels.add( op );
     public void outputAllWithIndentation( int level )
          indentation = level;
          titleArray[0] = indentString( indentation );
         System.out.println( titleArray[0] + "[" + titleArray[1] + "] " + titleArray[2] );
         recursiveTextArray.add( titleArray );
          for ( int i = 0; i < subLevels.size(); i++ )
               ( ( OplanPhase )subLevels.get( i ) ).outputAllWithIndentation( level + 1 );
     private static String indentString( int count )
          String blank = "";
          for ( int i = 0; i < count; i++ )
               blank = blank.concat( "   " );
          return blank;
}

What should I do?If you feel you need to cross-post, you should have the courtesy to provide a
link to the other post/s.
http://saloon.javaranch.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic&f=1&t=016129

XML PrintSelectedInvoices completes with warning when run as child request

Similar Messages

Maybe you are looking for