Xmlhttp.status stays null at times in Safari 3.0.3

Hi,
I am building an application using Ajax. I strangely found that the status of the Xmlhttp object i am using remains null at times during interactions. Works like a peach in other browsers though. *I strangely found it working in safari 3.0.4!*. Is this a bug in safari 3.0.3?
Thanks in advance,
Ajith

Hi,
If it's working in Safari 3.0.4 then it sounds like they fixed something.
Safari 3.0.3 is now obsolete since the new 3.0.4 version is out.

Similar Messages

Error Invoking Web Service Action: Status (500): null

Hi forum
I am getting an "Invoking Web Service Action: Status (500): null" error when invoking a web service action block . The BLS transaction used as a web service outputs a text string which I tested using an xacute query . while executing the transaction as a web service the tracer tells me that there is no output .
Best regards,
Antonio
I am using an xMII 11.5 installation .
[INFO ]: Execution Started At: 04:17:46
[DEBUG]: 00000.01600 Begin Transaction 'TMP45B360D9-0E02-2CF7-C4B4-F3C0B41C29E0'
[DEBUG]: 00000.01600 Begin Sequence Sequence : ()
[DEBUG]: 00000.01600 Begin Action WebService_0 : ()
[ERROR]: Error Invoking Web Service Action: Status (500): null
[ERROR]: ACTION FAILED: End Action WebService_0 : ()
[DEBUG]: 00000.11000 Begin Sequence Sequence_0 : ()
[DEBUG]: 00000.11000 Begin Action Tracer_0 : ()
[INFO ]:
[DEBUG]: 00000.11000 End Action Tracer_0 : ()
[DEBUG]: 00000.11000 End Sequence Sequence_0 : ()
[DEBUG]: 00000.11000 End Sequence Sequence : ()
[DEBUG]: 00000.11000 End Transaction 'TMP45B360D9-0E02-2CF7-C4B4-F3C0B41C29E0'
[INFO ]: Execution Completed At: 04:17:46 Elapsed Time was 94 mS

Jamie,
Yes Indeed, I was calling inside a web service action another BLS transaction . Now , I am using a call to the transaction using the runner . It worked fine .
Thanks,

My MacBook is almost two years old and has started running really slow. It gets bogged down when it is running different programs at the same time, like Safari and Pages. It didn't react this way until recently. Any advice would be very welcome.

My MacBook is almost two years old and has started running really slow. It gets bogged down when it is running different programs at the same time, like Safari and Pages. It didn't react this way until recently. Any advice would be very welcome.

Launch Disk Utility and select the icon of the internal drive (the drive itself, not the volume icons below it.) Is the SMART status "Verified?" If not, replace the drive immediately. If the status is "Verified," the drive may still be failing. Back up all data, if you haven't already done so. Reinstall Mac OS X, then run Software Update. Test with all wired peripherals disconnected. If it's still slow, you have a hardware problem.
Mac OS X 10.6 Help: Reinstalling Mac OS X

Anyone else having issues with location services since the 7.1 update? Ever since I updated i've been seeing the location services on my status bar at all times.

Anyone else having issues with location services since the 7.1 update? Ever since I updated i’ve been seeing the location services icon on my status bar at all times. I noticed that google was the app that was using it a lot, but after I turned the feature off for google my phone started using the “traffic”, “frequent locations” and “cell network search”. When I turn the feature off for all of those things it’s no longer a problem. So just wondering if anyone else is having this issue or if anyone has a solution?

The "solution" is probably to increase your knowledge. You've done good things. Perhaps this article will educate you a bit more about location services.
Basically, they can be very useful, but can cause a lot of iPhone use. A major example is "Remind me to ... when I leave home."
http://support.apple.com/kb/HT5594

Several user status at the same time

Hi Export,
As I found, we can only choose one status from the list in WBS. Is there any config can make it possible to select multi status in one time?
Thanks,
Liang

Hi
yes you can select more then one user status at the same time
For example you create user status like this in OK02
1     INIT     Initiative
2     DRPR     Draft Proposal
3     PLAN     Fully planned & costed
4     AFEA     502-Approved
5     RELE     Released for execution
6     HOLD     On hold
You can select the user status from the above list
If you set the Initial status flag for the user status
If a status is marked as an initial status, it is automatically activated in an object when the object is created
Thanks
S.Murali

New york times updates - safari extension - not refreshing

New York Times Updates Safari Extension seems to have stopped updating it's info. I uninstalled it and then reinstalled it, but it only added a couple of items from several days ago. Is this feed no longer viable? The version on the Safari extensions web site is 0.1, the same as always.

Try emptying the Safari cache more often.
You can do this from the Safari menu bar, click Safari / Empty Cache or Command + Option + E on your keyboard.
If emptying the cache didn't make a difference, go to the Safari menu bar click Safari > Reset Safari.
Select the top 5 boxes, click Reset.
Restart your computer.

''Well When i plug in my ipod touch the battery life is low..i let it sit a wyhle.And it starts up to the apple logo and it stay there some time then it restartsback over to the very low battery and repeat(Over&Over)?

''Well When i plug in my ipod touch the battery life is low..i let it sit a wyhle.And it starts up to the apple logo and it stay there some time then it restartsback over to the very low battery and repeat(Over&Over)

Can you reset the device by holding the sleep and home button until the Apple logo comes back again?
If this does not work, try to connect in recovery mode, explained here: iOS: Unable to restore

Why doesn't the "back" button work all the time in Safari?

Why doesn't the "back" button work all the time in Safari?

thanks for the reply. You prompted me to check and I realised it wasn't installed on my test laptop and opening in Microsoft Reader. I've installed it now and it works.
My next challenge is to prevent the mailto: command opening Microsoft Mail instead of Outlook, but I guess every user will have a different default.
Thank you

Persistant Status Bar Notification ... error 'SP.UI.Status' is null or not an object

I want to show a status bar that needs to be persistent on a page. for this I used the following in my master page
function ShowStatusBarMessage(title, message)
var statusId = SP.UI.Status.addStatus(title, message, true);
SP.UI.Status.setStatusPriColor(statusId, 'yellow'); /* Set a status-color */
HTML, call the JS method:
<a onclick="ShowStatusBarMessage('Title'!','Awesome message!')">
Display Status Bar message!
</a>
ref:
http://www.zimmergren.net/archive/2010/03/17/sp-2010-dynamically-displaying-messages-to-your-users-with-the-notification-and-status-bar-areas-in-sharepoint-2010.aspx
But what I want is
to call the function on load. So I used pushed ny function to _spBodyOnLoadWrapper using _spBodyOnLoadFunctionNames.push("YourFunctionName");,
it throws an error 'SP.UI.Status' is null or not an object
Next I created and
deployed a webcontrol and did a registerclientscript, that too gives me 'SP.UI.Status' is null or not an object
// Define the name and type of the client scripts on the page.
String csname1 = "AlertScript";
Type cstype = this.GetType();
// Get a ClientScriptManager reference from the Page class.
ClientScriptManager cs = Page.ClientScript;
// Check to see if the startup script is already registered.
if (!cs.IsStartupScriptRegistered(cstype, csname1))
StringBuilder cstext1 = new StringBuilder();
cstext1.Append("<script type=text/javascript> alert('Hello World!');");
cstext1.Append("var statusId = SP.UI.Status.addStatus('title', 'message', true);");
cstext1.Append("SP.UI.Status.setStatusPriColor(statusId, 'yellow'); </");
cstext1.Append("script>");
cs.RegisterStartupScript(cstype, csname1, cstext1.ToString());
What am I missing ?
How can I get to show a status bar on load of any page, just as you get a health analyzer message when you get into the Central Admin?
Thanks, Mano
Mano Mangaldas | Blog : http://howtosharepoint.blogspot.com

Ok, for some reason, it is not working for me. Below are the code that didnt work for me
<script type="text/javascript">
function ShowStatusBarMessage(title, message)
var statusId = SP.UI.Status.addStatus(title, message, true);
SP.UI.Status.setStatusPriColor(statusId, 'red');
ShowStatusBarMessage('Title!','Awesome message!');
</script>
This too didnt work
<script type="text/javascript">
function ShowStatusBarMessage()
var statusId = SP.UI.Status.addStatus('Some title', 'Some message', true);
SP.UI.Status.setStatusPriColor(statusId, 'red');
_spBodyOnLoadFunctionNames.push("ShowStatusBarMessage");
</script>
I did try to register client script block programatically, that too didnt work
String csname1 = "AlertScript";
Type cstype = this.GetType();
// Get a ClientScriptManager reference from the Page class.
ClientScriptManager cs = Page.ClientScript;
// Check to see if the startup script is already registered.
if (!cs.IsStartupScriptRegistered(cstype, csname1))
StringBuilder cstext1 = new StringBuilder();
cstext1.Append("<script type=text/javascript>");
cstext1.Append("var statusId = SP.UI.Status.addStatus('title', 'message', true);");
cstext1.Append("SP.UI.Status.setStatusPriColor(statusId, 'yellow'); </");
cstext1.Append("script>");
cs.RegisterStartupScript(cstype, csname1, cstext1.ToString());
Any help appreciated.
But the below code works..
<script type="text/javascript">
function ShowStatusBarMessage(title, message)
var statusId = SP.UI.Status.addStatus(title, message, true);
SP.UI.Status.setStatusPriColor(statusId, 'yellow'); /* Set a status-color */
</script>
<a onclick="ShowStatusBarMessage('Title!','Awesome message!')" href="#">
Display Status Bar message!
</a>
Thanks
mano
Mano Mangaldas | Blog : http://howtosharepoint.blogspot.com

How can I make the status bar hide automatically when using safari?

How can I make the status bar hide automatically when using safari?

When Safari is in FullScreen mode, menu bar will be hidden.
Safari window to fit the screen?
Move the mouse pointer to the bottom right corner of the Safari window.
Double arrows will appear. Drag it to resize the window to fit the screen.

FP-1600 Status LED blinks 17 times.

My FieldPoint bank has 9 modules. I previously had a problem with the FP-TB-10 power and ready lights blinking, but that was because one of my dual-channel modules was not seated correctly. Now the status LED is blinking 17 times. The manual says to contact NI about this. The FieldPoint Explorer seems to find all of the modules correctly, though. Anyone know what's up?

Aaron,
I checked the firmware and the FieldPoint Explorer version, and I'm using 3.20 and 3.0, respectively. When I power cycle the FP-1600, the 17 blinks of the status LED go away. Communication works, and all of the devices are found. However, communication does drop out from time to time, and eventually the status LED begins blinking 17 times again.
A possibly related issue is that the FP-AI-V10 dual-channel module that I have plugged into slot 2 of the FP-TB-10 base causes the FP-TB-10 to flash its power and ready LEDs. Re-seating the FP-AI-V10 seems to fix this, although the module is definitely already clicked into place when I see this problem. Upon reseating (or just pressing on it without removing the module), the FieldPoint Explo
rer program finds this module.
I'm tempted to think that this issue with the FP-TB-10 and FP-AI-V10 are unrelated to the FP-1600's status LED blinking 17 times because even with the FP-TB-10 removed from the bank, I still get the flashing LED.
Any ideas? Also, what is a GPF type error?
Thanks,
Jake

Is it possible to clear the entire Bookmarks list at one time in Safari for Windows?

Hello. Is it possible to clear the entire Bookmarks list at one time in Safari for Windows? I would like to continue to use the Safari browser even though I have Windows 7 as the operating system on my notebook. When I try to delete bookmark entries one at a time, after deleting several, errors start popping up in the browser. Can I reinstall Safari without the Bookmarks I've built up? Please help a humbled Safari user.

Are you sure that you can change the permissions of symlinks themselves? I think I've tried to make files read-only via symlinks on a local server but ended up using bindfs because it wasn't possible. Even if you can, symlinking everything that might be necessary for a given environment would not be ideal, plus I don't think symlinks can be used across different filesystems.
If a real-life human can figure out if it's he/she is in a chroot and break out of it, then he/she can write a script to do the same. I want a sandbox that could run malicious code with no effect on the system (if that's possible). Also, I think if the chroot idea were truly feasible, makepkg would have been using it for years already to simply install packages in the chroot as you normally would and then package them. There would also be several sandbox applications that could run applications safely. So far I have yet to find any.
I admit that I haven't looked into using a chroot in detail though and of course I may have missed some application which creates such a setup. Right now I think using per-application namespaces with fuse seems the most promising but I won't know until I've finished implementing a test application. If it turns out that it's a dead end I'll take harder look at chroot but it really doesn't seem to be able to do what I want.

Javascript error in Internet Explorer: status is null or not object

Hi.
I use Oracle AS MapViewer 1033p5_B081010, and show maps fine with firefox, but failure with Internet Explorer, and not show map.
My error description in javascript is :
Line: 1143
Character: 1
Error: 'status' is null or is not object
Any Idea?
Please I need a solution or help for solution.
Regards,
Marcelo A. Vasquez

Hi Marcelo,
it may be something in your java script code around line 1143 ('status' parameter?). IE seems not to like it. I would check this piece of code.
Joao

Compressor 3.0.5 stays on unknown time remaining

Compressor 3.0.5 stays on unknown time remaining and I am not able to export video or audio files. I tried reinstalling the whole FCP studio 2 it works for a bit and then same problem occur. Can anybody help?
Thanks,
Scott

Just as an addon, I found a fix offered by Digital Rebellion in another post somewhere in here. They have a (free) compressor repair utility, amongst other things on their website. I just ran it and now my Compressor works again. Thanks Digital Rebellion!
Here's the link: http://www.digitalrebellion.com/compressor_repair.htm
Hope this works for you.
best,
-alf

Request Status stays yellow after successful load

We recently started loading two infocubes from the same data source.
- The Monitor shows that the load completed normally with no errors.
- Manage on the first cube shows that the status is green and the data available for reporting.
- Manage on the second cube shows the data is not avaialble and the status is yellow.
There seems to be no problems with the load. I can manualy force the status from yellow to green and the data is available for reporting. But I don't want to have to manully change the status after each load. Any ideas on why the status stays yellow? Any thoughts on what I can do?
Thanks,
Chris

Nagesh,
Looks like your suggestion will solve this. It was not checked for the one that was staying yellow. It was checked for the cube that would go to green. I'll run a test then come back and award points.
Thanks,
Chris

Xmlhttp.status stays null at times in Safari 3.0.3

Similar Messages

Maybe you are looking for