Xmlspy problem!
I have created a Webservice to RFC Scenario in XI
I tried to test my webservice using XMLSPY.
When i tried running my webservice in XMLSPY.
Problem : In starting it asked for my server username and password. After when i gave the user and password of my server. mesage appears as " Could not post file on the server "hstxid" its comming ".
Please help!
Edited by: senthilprakash selvaraj on Dec 24, 2007 4:12 AM
Below is the Error i am getting after the above metioned errors:
<?xml version="1.0"?>
<!-- see the documentation -->
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
<detail>
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>ModuleUnknownException</code>
<text><![CDATA[
com.sap.aii.af.mp.module.ModuleException: either no channelID specified or no channel found for the specified party, service, and channel name, MessageServlet(Version $Id: //tc/xi/NW04_15_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#2 $)
at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:380)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
]]></text>
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
QUESTION: How to check/get the IP address of a XI server ?
Similar Messages
-
Problemas no recebimento de XML via E-mail caracteres especiais Valid ***.
Boa tarde
Mestres
Este problema descrito abaixo só acontece qnd recebo XML com caracteres especiais entre as tags Enter, Tabs, Espaço....
que representam 30% dos XML recebidos via E-MAIL
Estou tendo problemas quando tenho a Assinatura Digital verificada pelo Serviço disponibilizado pelo Visual Administrador(Verify)
Hoje recebo um XML por e-mail...resgato a string do XML no Kpro (GRC) e envio para esse serviço de Validação de Assinatura o mesmo Invalida a Assinatura
Quando o mesmo é submetido ao validador do governo Programa Visualizado NF-e 3.5 e ao serviço SEFAZ RS http://www.sefaz.rs.gov.br/ASP/AAE_ROOT/NFE/SAT-WEB-NFE-VAL_1.asp a assinatura é dada como Valida
Bom ...o senhores devem estar se perguntando será que esse arquivo não esta sendo corrompido na transferencia do mesmo para o Kpro ou no envio da msg para o serviço de validação de assinatura..., por esse motivo executei alguns ciclos de teste..:
1 - Baixei o arquivo original para minha máquina e executei a validação usando o programa do governo
Visualizador NFe 3.5 / serviço SEFAZ RS - Assinatura Válida
2 - Executei a Interface através do PI enviando uma MSG contendo a string do xml NFe resgatada no Kpro... para esse
Serviço disponibilizado pelo Visual Administrador(SAP) as java - Assinatura Invalida
3 - Baixei o Payload da MSG da interface de Validação da ***. Digital pela transação SXI_MONITOR Ajustei o xml editando em um bloco de notas (trocando os caracteres <> para maio e menor)
Visualizador NFe 3.5 / serviço SEFAZ RS - Assinatura Válida
4 - Criei um programa abap ler a string do XML no Kpro (GRC) e baixar ..local
Visualizador NFe 3.5 / serviço SEFAZ RS - Assinatura Válida
5 - Executei a Interface através do PI enviando uma MSG contendo a string do xml ...local ..teste executado através da transação SPROXY
- Assinatura Invalida
em qual serviço estará o Problema?
Alguém já enfrentou esse problema ou esta enfrentando?...pois esse tipo de problema parece ser muito comum pois nem toda empresa tem SAP ....e o problema é que o SEFAZ aceita e valida esses XMLs...!
pois estou pensando em seguir parte desta sugestão
agradeço desde já ....!
Edited by: Ronaldo de Moraes on Oct 21, 2009 3:05 AMRonaldo,
claramente há algum problema com a codificacao do arquivo.
Abra o xml no Notepad e verifique que na tag Signature, há varias quebras de linha, incluindo caracteres nao reconhecidos (representados como um retangulo).
Ainda, como vc está testando o servico verify?
Vc fez uma interface XI? Porque não há interface PI standard p/ o serviço verify.
Ainda, como vc chamou essa interface? Pela tela de teste do Runtime Workbench?
O próprio ctrl+c que vc dá no conteúdo pode estar corrompendo os dados.
O fato de vc estar utilizando um browser para o teste poderia corroborar isso.
Faça o seguinte teste:
1. Através do XMLSpy, criar uma SOAP Request p/ a interface verify (menu SOAP -> Create New SOAP Request)
2. a tag Send SOAP Request). Aqui deu válida;
4.2. abra o .xml que vc quer testar no notepad, copie a tag Send SOAP Request). Aqui deu inválida.
Ou seja, dependendo da maneira que vc trata o conteudo (aplicacao onde vc abre o .xml, ctrl+c etc) vai haver uma modificacao da codificacao.
Nao vejo muita maneira de garantir que funcione sempre a nao ser removendo esses caracteres, conforme definido pela propria SEFAZ.
Att,
Henrique. -
Problem using namespace of XML docs gerenrated by XMLForm
Hi community!
I am facing a problem using namespace within a XSL stylsheet. Let me describe my problem:
I am using the SAP XMLFormsBuilder within the SAP EnterprisePortal in order to provide a HTML based form for creating and editing specific XML documents. The data in the generated documents is finally presented as HTML using XSL Transformation.
In the XMLFormsBuilder you define the Schema of the XML document and the HTML GUI of the form. The Schema document looks like below (extract):
<?xml version="1.0" encoding="utf-8"?>
<schema targetNamespace="http://www.xmlspy.com/schemas/orgchart"
xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:xyz="http://www.xmlspy.com/schemas/orgchart" Version="6.3.0">
<element name="commodity"
default=""
minOccurs="1"
maxOccurs="1"
ns="p2p"
xmlns:p2p="http://www.portal.p2p.com">
<complexType>
<sequence>
<element name="administrative_information"
default=""
minOccurs="1"
maxOccurs="1"
ns="p2p">
<complexType>
<sequence>
<element name="creation_date"
default=""
minOccurs="1"
maxOccurs="1"
type="date"
ns="p2p"/>
As far as I understand, each element defined in the Schama belongs to the namespace "p2p" and this is exactly what I want.
The XML document generated by the form looks like below (extract):
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="show_card.xsl"?>
<commodity xmlns:xf="http://www.sapportals.com/wcm/app/xmlforms"
xmlns:xsi="http//www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="/etc/xmlforms/P2PCategoryCard_TEST/P2PCategoryCard_TEST-Schema.xml">
<administrative_information>
<creation_date>2005-07-04</creation_date>
Consequently, the file "show_card.xsl" is the responsible XSLT stylesheet, which looks like this:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:p2p="http://www.portal.p2p.com">
<xsl:output method="html"/>
<xsl:template match="p2p:commodity">
<html>
<body>
<h2>XSLT Test</h2>
Creation Date: <xsl:value-of select="p2p:administrative_information/p2p:creation_date"/>
</body>
</html>
</xsl:template>
</xsl:stylesheet>
The problem in the XSLT stylesheet is, that I want to access the XML document elements using their namespace. And this is exactly what does not work for me. On the other hand, if I remove the reference to the namespace:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:p2p="http://www.portal.p2p.com">
<xsl:output method="html"/>
<xsl:template match="commodity">
<html>
<body>
<h2>XSLT Test</h2>
Creation Date: <xsl:value-of select="administrative_information/creation_date"/>
</body>
</html>
</xsl:template>
</xsl:stylesheet>
the stylesheet works fine, but for some technical reasons, which I don't want to explain here, I have to use the namespace when accessing the XML document elements.
For technical reasons, I cannot change the format of the Schema document and also cannot change the format of the generated XML document. The only file I can change and control is the XSLT stylsheet.
My question is now, in the case described above, if there is any way to use the namespace in the sytlesheet when accessing the XML elements?
Any help is appreciated.
Cheers,
Adam Kreuschnerduggal.ashish wrote:
3. Some XML files contain a "iso-8859-1" character with character code 146 which appears like apostrophes but actually it is : - ’ and the problem is that words like can’t are shown as can?t by database.http://en.wikipedia.org/wiki/ISO8859-1
Scroll down in that page and you'll see that the character code 146 -- which would be 92 in hexadecimal -- is in the "unused" area of ISO8859-1. I don't know where you got the idea that it represents some kind of apostrophe-like character but it doesn't.
Edit: Actually, I do know where you got that idea. You got it from Windows-1252:
http://en.wikipedia.org/wiki/Windows-1252
Not the same charset at all. -
XSLT Mapping - problem with prefixes when calling template
Hi all,
I am having a problem with using an XSLT mapping in XI to combine various fields from 2 input messages of different structures into a single output message. I understand that XI puts a wrapper around the 2 input messages so the structure of the XML I am mapping is:
<?xml version="1.0" encoding="UTF-8"?>
<ns2:Messages xmlns:ns2="http://sap.com/xi/XI/SplitAndMerge">
<ns2:Message1>
<ns:(root of first message)>
</ns:(root of first message)>
</ns2:Message1>
<ns2:Message2>
<ns:(root of second message)>
</ns: (root of second message)>
</ns2:Message2>
</ns2:Messages>
Currently my XSL looks like the following:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns="http://example.co.uk/example" xmlns:ns2="http://sap.com/xi/XI/SplitAndMerge" xmlns:javamap="java:systemDate.CurrentDate" version="2.0">
<xsl:output method="xml" version="1.0" encoding="UTF-8"/>
<xsl:param name="inputparam"/>
<xsl:template match="ns2:Messages">
...<xsl:calltemplate name="FormattingTemplate"/>
</xsl:template>
<xsl:template name="FormattingTemplate">
</xsl:template>
</xsl:stylesheet>
When I test the mapping it works fine until it calls the FormattingTemplate. Then it throws out a "transformer exception" error saying the prefix 'ns2' is not mapped to a namespace.
If anyone could tell me where I am going wrong I would be very grateful.
Thanks,
MikeHi Udo,
Thanks for your reply.
When testing the stylesheet locally with XMLSpy, it works fine, but I have just noticed that it adds information in the root tag of the target message as follows:
<(root of target message) xmlns:javamap="java:systemDate.CurrentDate" xmlns:ns="http://example.co.uk/example" xmlns:ns2="http://sap.com/xi/XI/SplitAndMerge">
I checked the root tag of the target message in XI and it does not automatically add this information. Thus I added it in my stylesheet so the information above is projected in the target message, but the same error message appears when the call template function is called. Do you know if I need to somehow add a namespace to templates other than the main one? If so, do you know how I go about doing that?
Thanks,
Mike -
Problem in JDBC Adapter Mapping
Hi all,
I am working on a scenario wherein i am trying to connect an ORACLE DB to SAP 4.7 system using XI 3.0 . I configured the JDBC Adapter and the JDBC adpter is picking up the message but i have a problem in JDBC adpter Mapping.
The error message is like this:
<!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_ORACLE_MSGMAP_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>During the application mapping com/sap/xi/tf/_ORACLE_MSGMAP_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
How to map the "Resultset" from the Adapter to a target message? Can anybody throw some light on how to get the message from the JDBC adpter and map it to some other message format...Any documents regarding this ?
Waitin for ur replies...
Bye,
Romit Shankar Arun.Hi,
Does your other SDN post "Inserting data through JDBC adapter" refer to the same problem?
I assume you use XMLSPY for creating XSDs.
I used the XSD posted by you in the other forum thread and tried to generate the XML structure and it does not seem to generate the XML structure in the format required by the JDBC adapter.
sample file generated from your XSD posted in the other forum thread:
<?xml version="1.0" encoding="UTF-8"?>
<resultset xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="C:\Untitled1.xsd">
<row action="INSERT">
<CUSTOMER_NUMBER>String</CUSTOMER_NUMBER>
<COUNTRY_KEY>String</COUNTRY_KEY>
<FIRST_NAME>String</FIRST_NAME>
<LAST_NAME>String</LAST_NAME>
<AUTHORIZATION_GROUP>String</AUTHORIZATION_GROUP>
<INDUSTRY_KEY>String</INDUSTRY_KEY>
<ACCOUNT_GROUP>String</ACCOUNT_GROUP>
<INTIAL_CONTACT>String</INTIAL_CONTACT>
<COMPANY_CODE>String</COMPANY_CODE>
<CITY>String</CITY>
<CITY_CODE>String</CITY_CODE>
<COUNTRY_CODE>String</COUNTRY_CODE>
<DISTRICT>String</DISTRICT>
<FAX_NUMBER>String</FAX_NUMBER>
<HOUSE_NUMBER>String</HOUSE_NUMBER>
<POSTAL_CODE>String</POSTAL_CODE>
<REGION>String</REGION>
<TELEPHONE_NUMBER>String</TELEPHONE_NUMBER>
</row>
</resultset>
Compare the above to the template i have mentioned.
Hope this helps.
Regards,
Sridhar -
SOAP to rfc XMLSPY not conneting with PI 7.1 server
hiii gurus,
I am trying soap to rfc scenario. i have completed all the steps.. generated the webservice . now i am testing from XMLSPY
when im sending the soap request to sender i m getting the following error.
"<?xml version="1.0"?>
<!-- see the documentation -->
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
<detail>
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>ADAPTER.JAVA_EXCEPTION</code>
<text><![CDATA["
"com.sap.aii.af.lib.mp.module.ModuleException: either no channelID specified or no channel found for the specified party, service, and channel name, MessageServlet(Version $Id: //tc/xpi.adapters/NW07_04_REL/src/_soap_application_web_module/webm/api/com/sap/aii/adapter/soap/web/MessageServlet.java#1 $)
The Channel has been configured correctly.. i dont know what is the problem... In some conversion i saw something like the userid which im giving should have the role as SAP_XI_APPL_SERV_USER. when i checked it not assigned .. so i assigned manually. but still the same problem exits..
please help me experts.
Regards,
Balaji
Edited by: Balaji Pichaimuthu on Sep 2, 2009 5:20 PM
Edited by: Balaji Pichaimuthu on Sep 2, 2009 5:21 PM<?xml version="1.0" encoding="UTF-8" ?>
- <wsdl:definitions name="aryan_soap_rfc_mi" targetNamespace="http://aryansoap2rfc" xmlns:p1="http://aryansoap2rfc" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<wsdl:documentation />
- <wsdl:types>
- <xsd:schema targetNamespace="http://aryansoap2rfc" xmlns="http://aryansoap2rfc" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:element name="aryan_req_soap_mt" type="file_req_soap_dt" />
<xsd:element name="aryan_soap_rfc_mt" type="file_res_soap_rfc_dt" />
- <xsd:complexType name="file_req_soap_dt">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/VersionID">5bf85d84978d11deab10001422b066ca</xsd:appinfo>
</xsd:annotation>
- <xsd:sequence>
<xsd:element name="company_code" type="xsd:string" />
</xsd:sequence>
</xsd:complexType>
- <xsd:complexType name="file_res_soap_rfc_dt">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/VersionID">811a2213978d11dec05a001422b066ca</xsd:appinfo>
</xsd:annotation>
- <xsd:sequence>
<xsd:element name="company_code" type="xsd:string" />
<xsd:element name="company_name" type="xsd:string" />
<xsd:element name="city" type="xsd:string" />
<xsd:element name="Country" type="xsd:string" />
<xsd:element name="Language" type="xsd:string" />
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</wsdl:types>
- <wsdl:message name="aryan_req_soap_mt">
<wsdl:documentation />
<wsdl:part name="aryan_req_soap_mt" element="p1:aryan_req_soap_mt" />
</wsdl:message>
- <wsdl:message name="aryan_soap_rfc_mt">
<wsdl:documentation />
<wsdl:part name="aryan_soap_rfc_mt" element="p1:aryan_soap_rfc_mt" />
</wsdl:message>
- <wsdl:portType name="aryan_soap_rfc_mi">
<wsdl:documentation />
- <wsdl:operation name="aryan_soap_rfc_mi">
<wsdl:input message="p1:aryan_req_soap_mt" />
<wsdl:output message="p1:aryan_soap_rfc_mt" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="aryan_soap_rfc_miBinding" type="p1:aryan_soap_rfc_mi">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" />
- <wsdl:operation name="aryan_soap_rfc_mi">
<soap:operation soapAction="http://sap.com/xi/WebService/soap1.1" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" />
- <wsdl:input>
<soap:body use="literal" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="aryan_soap_rfc_miService">
- <wsdl:port name="aryan_soap_rfc_miPort" binding="p1:aryan_soap_rfc_miBinding">
<soap:address location="http://pi71server1.domain.com:50200/XISOAPAdapter/MessageServlet?channel=:aryan_3rdparty_recv_BS:aryam_soap_rfc_sender_cc&version=3.0&Sender.Service=aryan_3rdparty_recv_BS&Interface=http%3A%2F%2Faryansoap2rfc%5Earyan_soap_rfc_sender_cc" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Hii im trying to post my content of my wsdl file.. but in preview mode its loook like above ... actually thats my wsdl file only.. but when post a message .. it coming like above string.
Edited by: Balaji Pichaimuthu on Sep 3, 2009 7:02 AM -
Hi
I ahve a specific reqmt to convert my ascii information into EBCDIC before writing XML data to a file adapter.I have converted my ASCII data to Codepage CP037 before
the payload looks in XI like this
<?xml version="1.0" ?>
<ns0:MT_Result_FlatStr xmlns:ns0="http://YYYY/DACOR_PAY_INSIDE_OUT/BI_1.5A_01">
<Row>
<RowValue>???????? ??????????????????? ??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????</RowValue>
</Row>
</ns0:MT_Result_FlatStr>
My File adapter is unable to parse this file and it throws me an error, Invalid Char 0x16
Receiver Adapter v1319 for Party '', Service 'BUS_DACOR_PAY':
Configured at 21:10:13 2005-06-06
Last message processing started 21:10:55 2005-06-06, Error: Message processing failed with java.lang.Exception: Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x16(:main:, row:4, col:9)(:main:, row=4, col=9) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x16(:main:, row:4, col:9)'
The XML data looks well formed IE , but in XMLSPY again I could see an illegal char 22 error.
What is the problem?? Cant XI file adapter(SAX parser) handle EBCDIC data..Is there any workarounds to this?? Its urgentHi Sriram,
if you're using File Encoding parameter to specify a code page in th receiver file adapter remember that:
"Permitted values for the code page are the existing Charsets of the Java runtime"
from:
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
Cp037 is not a basic but an extended encoding set
http://java.sun.com/j2se/1.4.2/docs/guide/intl/encoding.doc.html
so maybe your Java runtime just doesn't support it?
Regards,
michal -
Insert data into the xml schema-based xmltype table problem!
Hello, there,
I got problem in inserting data into the xmltype table after registered XML schema and created table. details see below:
1) xml schema:
<?xml version="1.0" encoding="UTF-8"?>
<!-- edited with XMLSpy v2007 sp2 (http://www.altova.com) by Constantin Ilea (EMERGIS INC) -->
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1" targetNamespace="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1" elementFormDefault="qualified">
<!-- ************** PART I: BEGIN SIMPLE OBJECT TYPE DEFINITIONS ********************************** -->
<xs:simpleType name="RoutingType">
<xs:restriction base="xs:string">
<xs:enumeration value="Synch"/>
<xs:enumeration value="Asynch"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="StatusType">
<xs:restriction base="xs:string">
<xs:enumeration value="ACTIVE"/>
<xs:enumeration value="VOID"/>
<xs:enumeration value="PENDING"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="SenderApplicationType">
<xs:restriction base="xs:string">
<xs:enumeration value="PR"/>
<xs:enumeration value="CR"/>
<xs:enumeration value="POS"/>
<xs:enumeration value="CPP"/>
<xs:enumeration value="Other"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="ServiceTypeType">
<xs:restriction base="xs:string">
<xs:enumeration value="IS"/>
<xs:enumeration value="WS"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="RouteDirect">
<xs:restriction base="xs:string">
<xs:enumeration value="Request"/>
<xs:enumeration value="Reply"/>
<xs:enumeration value="None"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="Indicator">
<xs:annotation>
<xs:documentation>can we also change the value to "ON" and "OFF" instead? in this way this cn be shared by all type of switch indicator</xs:documentation>
</xs:annotation>
<xs:restriction base="xs:string">
<xs:enumeration value="YES"/>
<xs:enumeration value="NO"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="RuleType">
<xs:restriction base="xs:string">
<xs:enumeration value="ControlAct"/>
<xs:enumeration value="WSPolicy"/>
<xs:enumeration value="AccessControl"/>
<xs:enumeration value="Certification"/>
<xs:enumeration value="MessageConformance"/>
<xs:enumeration value="Variant"/>
<xs:enumeration value="Routing"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="HL7Result">
<xs:restriction base="xs:string">
<xs:enumeration value="ACCEPT"/>
<xs:enumeration value="REFUSE"/>
<xs:enumeration value="REJECT"/>
<xs:enumeration value="ACK"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="IIPType">
<xs:restriction base="xs:string">
<xs:enumeration value="PUT"/>
<xs:enumeration value="GET/LIST"/>
<xs:enumeration value="NOTIF"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="ProfileTypeType">
<xs:restriction base="xs:string">
<xs:enumeration value="IIPProfile"/>
<xs:enumeration value="BizOperationProfile"/>
<xs:enumeration value="OrchestrationProfile"/>
<xs:enumeration value="DomainObjectProfile"/>
<xs:enumeration value="ServiceProfile"/>
<xs:enumeration value="ExceptionProfile"/>
<xs:enumeration value="CustomizedProfile"/>
<xs:enumeration value="SystemProfile"/>
<xs:enumeration value="HL7XMLSchemaProfile"/>
<xs:enumeration value="EnricherParametersProfile"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="ParameterType">
<xs:restriction base="xs:string">
<xs:enumeration value="String"/>
<xs:enumeration value="Object"/>
<xs:enumeration value="Number"/>
<xs:enumeration value="Document"/>
</xs:restriction>
</xs:simpleType>
<!-- ************** PART I: END SIMPLE OBJECT TYPE DEFINITIONS ********************************** -->
<!-- ************** PART II: BEGIN COMPLEX OBJECT TYPE DEFINITIONS ********************************** -->
<!-- *********************** begin new added objects, by rshan *************************************** -->
<xs:complexType name="ProfileType">
<xs:annotation>
<xs:documentation>
1.Profile IS USED TO BE AN WRAPPER ELEMENT FOR ALL KIND OF PROFILES NO MATTER WHAT KIND OF PROFILE IT IS
2.ProfileID used to uniquely identify the current profile
3.ProfileData used to hold all the necessary profile related data
</xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:element name="ProfileID" type="ProfileIDType">
<xs:annotation>
<xs:documentation>this will hold all the common attributes, espically the global unique identifier to the profile, no matter what type of profile is</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="ProfileData" type="ProfileDataType">
<xs:annotation>
<xs:documentation>all the non-common profile meta data that attached to each specific profile type such as IIPProfile, OrchestrationProfile, and BizOperationProfile will be placed here</xs:documentation>
</xs:annotation>
</xs:element>
</xs:sequence>
</xs:complexType>
<xs:complexType name="ProfileIDType">
<xs:annotation>
<xs:documentation>global unique identifier and all the common attributes across all different profiles, the @ID and @Type together will be used as the primary key to identify the profile data</xs:documentation>
</xs:annotation>
<xs:attribute name="ID" type="xs:ID" use="required">
<xs:annotation>
<xs:documentation>ID is the global unique identifier to the profile, no matter what type of profile it is</xs:documentation>
</xs:annotation>
</xs:attribute>
<xs:attribute name="Name"/>
<xs:attribute name="Description"/>
<xs:attribute name="Version">
<xs:annotation>
<xs:documentation>version of the profile data</xs:documentation>
</xs:annotation>
</xs:attribute>
<xs:attribute name="Type" type="ProfileTypeType" use="required">
<xs:annotation>
<xs:documentation>value to identify the ProfileType type within
IIPProfile,BizOperationProfile,OrchestrationProfile,DomainObjectProfile
ServiceProfile,ExceptionProfile,SystemProfile,HL7XMLSchemaProfile,
EnricherParametersProfile,CustomizedProfile
</xs:documentation>
</xs:annotation>
</xs:attribute>
<xs:attribute name="Status" type="StatusType" default="ACTIVE">
<xs:annotation>
<xs:documentation>used to show the related profile data status like "ACTIVE","PENDING","VOID"...</xs:documentation>
</xs:annotation>
</xs:attribute>
<!--
<xs:sequence>
<xs:element name="ProfileReference" type="ProfileIDType" minOccurs="0" maxOccurs="unbounded">
<xs:annotation>
<xs:documentation>this will be the place to hold the integrity relationship with other profiles like foreign key if existed and necessary to show up</xs:documentation>
</xs:annotation>
</xs:element>
</xs:sequence>
-->
</xs:complexType>
<xs:complexType name="ProfileDataType">
<xs:annotation>
<xs:documentation>meta data associated tightly to each specific type of profile</xs:documentation>
</xs:annotation>
<xs:choice>
<xs:element name="EnricherParametersProfileData" type="EnricherParametersDataType">
<xs:annotation>
<xs:documentation>Enricher Parameters related profile data
1. one instance of this type may contains all the related System metadata.
2. idType part may use to identify different version/release/status
</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="ExtendProfileData" type="ExtendProfileDataType">
<xs:annotation>
<xs:documentation>If needed, any profile data not defined within the current release scope can be added here </xs:documentation>
</xs:annotation>
</xs:element>
</xs:choice>
</xs:complexType>
<xs:complexType name="ExtendProfileDataType">
<xs:sequence>
<xs:element name="ExtendProfile" type="xs:anyType" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="EnricherParametersDataType">
<xs:sequence>
<xs:element name="EnricherParameter" type="EnricherParameter" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="EnricherParameter">
<xs:sequence>
<xs:element ref="Enricher"/>
</xs:sequence>
<xs:attribute name="serviceName" type="xs:string" use="required"/>
<xs:attribute name="interactionID" type="xs:string"/>
</xs:complexType>
<xs:element name="Enricher">
<xs:annotation>
<xs:documentation>Comment describing your root element</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:sequence>
<xs:element name="Parameters" type="Parameters"/>
<xs:element ref="Section" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:complexType name="ValueType">
<xs:attribute name="field" use="required"/>
<xs:attribute name="value"/>
<xs:attribute name="action"/>
</xs:complexType>
<xs:element name="Section">
<xs:complexType>
<xs:sequence>
<xs:element name="Value" type="ValueType" minOccurs="0" maxOccurs="unbounded"/>
<xs:element ref="Section" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="path" use="required"/>
</xs:complexType>
</xs:element>
<xs:complexType name="Parameters">
<xs:sequence>
<xs:element name="Parameter" minOccurs="0" maxOccurs="unbounded">
<xs:complexType>
<xs:attribute name="name" use="required"/>
<xs:attribute name="reference"/>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
<xs:complexType name="RuleList">
<xs:annotation>
<xs:documentation>an array of rules</xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:element name="Rule" type="RuleProfile" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="RuleProfile">
<xs:attribute name="RName" use="required"/>
<xs:attribute name="RType" type="RuleType" use="required"/>
<xs:attribute name="Status" default="ON">
<xs:annotation>
<xs:documentation>By default is ON (or if is missing)</xs:documentation>
</xs:annotation>
</xs:attribute>
<xs:attribute name="Order"/>
<xs:attribute name="Direction" type="RouteDirect">
<xs:annotation>
<xs:documentation>Request / Reply</xs:documentation>
</xs:annotation>
</xs:attribute>
</xs:complexType>
<!-- ************** PART II: END COMPLEX OBJECT TYPE DEFINITIONS *********************************** -->
<!-- ************** PART III: BEGIN ROOT ELEMENTS DEFINITIONS ********************************* -->
<!-- 0) Profile wrapper root element
Profile IS USED TO BE AN WRAPPER ELEMENT FOR ALL KIND OF PROFILES NO MATTER WHAT KIND OF PROFILE IT IS
-->
<xs:element name="Profile" type="ProfileType">
<xs:annotation>
<xs:documentation>Profile IS USED TO BE AN WRAPPER ELEMENT FOR ALL KIND OF PROFILES NO MATTER WHAT KIND OF PROFILE IT IS</xs:documentation>
</xs:annotation>
</xs:element>
</xs:schema>
2)register xml schema:
SQL> begin
2 dbms_xmlschema.registerSchema
3 (
4 schemaurl=>'http://rac3-1-vip:8080/home/'||USER||'/xsd/EHIPProfile_v00.xsd',
5 schemadoc=>xdbURIType('/home/'||USER||'/xsd/EHIPProfile_v00.xsd').getClob(),
6 local=>True,
7 gentypes=>True,
8 genbean=>False,
9 gentables=>False
10 );
11 End;
12 /
PL/SQL procedure successfully completed.
SQL>
SQL>
3) xml data:
<?xml version="1.0" encoding="UTF-8"?>
<!--Sample XML file generated by XMLSpy v2007 sp2 (http://www.altova.com)-->
<Profile xmlns="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1">
<ProfileID Type="EnricherParametersProfile" Status="ACTIVE" ID="EnricherPP.ID.0001" Name="EnricherPP.ID.0001" Description="EnricherPP.ID.0001" Version="01"/>
<ProfileData>
<EnricherParametersProfileData>
<EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.ExceptionCreators:createExceptionV50CategoryCanonicalPart" interactionID="">
<Enricher>
<Parameters>
<Parameter name="MESSAGE_ID" reference="test"/>
</Parameters>
<Section path="HEADER">
<Section path="RESPONSE_TYPE">
<Value field="value" value="I"/>
</Section>
<Section path="HL7_STANDARD_VERSION">
<Value field="value" value="HL7V3"/>
</Section>
<Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
<Value field="value" value="NE"/>
</Section>
<Section path="SENDING_NETWORK_ADDRESS">
<Value field="value" value=""/>
</Section>
<Section path="SENDING_APPLICATION_IDENTIFIER">
<Value field="root" value="2.16.840.1.113883.3.133.1.3"/>
<Value field="extension" value=""/>
</Section>
<Section path="SENDING_APPLICATION_NAME">
<Value field="value" value="NL HIAL"/>
</Section>
</Section>
</Enricher>
</EnricherParameter>
<EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.DomainObjectCreators:createFindClientsAssociatedIdentifersRequestObject" interactionID="PRPA_IN101105CA">
<Enricher>
<Parameters>
<Parameter name="MESSAGE_ID" reference="test"/>
</Parameters>
<Section path="HEADER">
<Section path="RESPONSE_TYPE">
<Value field="value" value="I"/>
</Section>
<Section path="HL7_STANDARD_VERSION">
<Value field="value" value="HL7V3"/>
</Section>
<Section path="PROCESSING_CODE">
<Value field="value" value="T"/>
</Section>
<!--
<Section path="PROCESSING_MODE_CODE">
<Value field="value" value="T"/>
</Section>
-->
<Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
<Value field="value" value="NE"/>
</Section>
<Section path="RECEIVER_NETWORK_ADDRESS">
<Value field="value" value="prsunew.moh.hnet.bc.ca"/>
</Section>
<Section path="RECEIVER_APPLICATION_IDENTIFIER">
<Value field="root" value="2.16.840.1.113883.3.40.5.1"/>
<Value field="extension" value=""/>
</Section>
<Section path="SENDING_NETWORK_ADDRESS">
<Value field="value" value=""/>
</Section>
<Section path="SENDING_APPLICATION_IDENTIFIER">
<Value field="root" value="2.16.840.1.113883.3.133.1.3"/>
<Value field="extension" value=""/>
</Section>
<Section path="SENDING_APPLICATION_NAME">
<Value field="value" value="NL HIAL"/>
</Section>
</Section>
</Enricher>
</EnricherParameter>
<EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.DomainObjectContentEnrichers:enrichPRRequest" interactionID="">
<!--Sample XML file generated by XMLSpy v2007 sp2 (http://www.altova.com)-->
<Enricher>
<Parameters>
<Parameter name="MESSAGE_IDENTIFIER" reference="test"/>
</Parameters>
<Section path="HEADER">
<Section path="HL7_STANDARD_VERSION">
<Value field="value" value="V3PR2"/>
</Section>
<!--POS/CPP populated ?-->
<!--Not sure if this should be set as a variance within EHIP or if we expect the POS/CPP to provide this value-->
<Section path="PROCESSING_CODE">
<Value field="value" value="T"/>
</Section>
<!--POS/CPP populated ?-->
<Section path="PROCESSING_MODE_CODE">
<Value field="value" value="T"/>
</Section>
<!--POS/CPP populated ?-->
<Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
<Value field="value" value="NE"/>
</Section>
<!-- note:We Expect PRS to give us a web service address -->
<!--<Section path="RECEIVER_NETWORK_ADDRESS">
<Value field="value" value="_http://PRSServer/svcName"/>
</Section>
-->
<Section path="RECEIVER_APPLICATION_IDENTIFIER[0]">
<Value field="root" value="2.16.840.1.113883.3.40.1.14"/>
<Value field="extension" value="SIT1"/>
</Section>
<!-- note: values of the fields to be provided by PRS -->
<Section path="RECEIVER_APPLICATION_NAME[0]">
<Value field="value" value="receiverAppName"/>
</Section>
<!-- note: RECEIVER_ORGANIZATION has an extra trailing space, as in the Excel mapping spreadsheet -->
<!-- note: values of the fields to be specified by PRS later -->
<Section path="RECEIVER_AGENT/RECEIVER_ORGANIZATION/RECEIVER_ORGANIZATION_IDENTIFIER[0]">
<Value field="root" value="2.16.840.1.113883.3.40.4.1"/>
<Value field="extension" value="receiverOrgId"/>
</Section>
<Section path="SENDING_APPLICATION_NAME[0]">
<Value field="value" value="NLPRSCLNT"/>
</Section>
<!-- note: SENDING_ORGANIZATION has an extra trailing space, as in the Excel mapping spreadsheet -->
<!-- note: values of the fields to be specified by PRS later -->
<Section path="SENDING_AGENT/SENDING_ORGANIZATION/SENDING_ORGANIZATION_IDENTIFIER[0]">
<Value field="root" value="2.16.840.1.113883.4.3.57"/>
<Value field="extension" value="3001"/>
</Section>
<Section path="PERFORMER/HEALTHCARE_WORKER_IDENTIFIER[0]">
<Value field="root" value="2.16.840.1.113883.4.3.57"/>
<Value field="extension" value="HIAL_USR"/>
</Section>
</Section>
<Section path="PAYLOAD">
<!--<Section path="QUERY_STATUS_CODE">
<Value field="value" value="New"/>
</Section>-->
<!-- note: AUDIT has an extra trailing space, as in the Excel mapping spreadsheet -->
<Section path="AUDIT[0]/AUDIT_INFORMATION">
<Value field="code" value="LATEST"/>
<Value field="codeSystem" value="PRSAuditParameters"/>
</Section>
<!-- note: CONFIDENCE has an extra trailing space, as in the Excel mapping spreadsheet -->
<Section path="CONFIDENCE/CONFIDENCE_VALUE">
<Value field="value" value="100"/>
</Section>
<!-- note: HISTORY has an extra trailing space, as in the Excel mapping spreadsheet -->
<Section path="HISTORY/INCLUDE_HISTORY_INDICATOR">
<Value field="value" value="false"/>
</Section>
<!-- note: JURISDICTION has an extra trailing space, as in the Excel mapping spreadsheet -->
<Section path="JURISDICTION/JURISDICTION_TYPE">
<Value field="value" value="NL"/>
</Section>
<!-- note: RESPONSE_OBJECT has an extra trailing space, as in the Excel mapping spreadsheet -->
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[0]">
<Value field="code" value="GRS_ADDRESS"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[1]">
<Value field="code" value="GRS_ELECTRONIC_ADDRESS"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[2]">
<Value field="code" value="GRS_IDENTIFIER"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[3]">
<Value field="code" value="GRS_ORGANIZATION_NAME"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[4]">
<Value field="code" value="GRS_PERSONAL_NAME"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[5]">
<Value field="code" value="GRS_REGISTRY_IDENTIFIER"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[6]">
<Value field="code" value="GRS_TELEPHONE"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[7]">
<Value field="code" value="PRS_CONDITION"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[8]">
<Value field="code" value="PRS_CONFIDENTIALITY_INDICATOR"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[9]">
<Value field="code" value="PRS_DEMOGRAPHIC_DETAIL"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[10]">
<Value field="code" value="PRS_DISCIPLINARY_ACTION"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[11]">
<Value field="code" value="PRS_INFORMATION_ROUTE"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[12]">
<Value field="code" value="PRS_NOTE"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[13]">
<Value field="code" value="PRS_PROVIDER_CREDENTIAL"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[14]">
<Value field="code" value="PRS_PROVIDER_EXPERTISE"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[15]">
<Value field="code" value="PRS_PROVIDER_RELATIONSHIP"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[16]">
<Value field="code" value="PRS_STATUS"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[17]">
<Value field="code" value="PRS_WORK_LOCATION"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[18]">
<Value field="code" value="PRS_WORK_LOCATION_ADDRESS"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[19]">
<Value field="code" value="PRS_WORK_LOCATION_DETAIL"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[20]">
<Value field="code" value="PRS_WORK_LOCATION_ELECTRONIC_ADDRESS"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[21]">
<Value field="code" value="PRS_WORK_LOCATION_INFORMATION_ROUTE"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[22]">
<Value field="code" value="PRS_WORK_LOCATION_TELEPHONE"/>
</Section>
<!-- note: ROLE_CLASS has an extra trailing space, as in the Excel mapping spreadsheet -->
<Section path="ROLE_CLASS /ROLE_CLASS_VALUE">
<Value field="value" value="LIC"/>
</Section>
<Section path="SORT_CONTROL[0]/SORT_CONTROL_ELEMENT_NAME">
<Value field="code" value="PrincipalPerson.name.value.family"/>
</Section>
<Section path="SORT_CONTROL[0]/SORT_CONTROL_DIRECTION_CODE">
<Value field="value" value="A"/>
</Section>
</Section>
</Enricher>
</EnricherParameter>
</EnricherParametersProfileData>
</ProfileData>
</Profile>
the data is valid against the schema through XML Spy tool... and loaded into the XDB repository...
4) create table and insert data:
SQL> CREATE TABLE EHIP_PROFILE OF SYS.XMLTYPE
2 XMLSCHEMA "http://rac3-1-vip:8080/home/EHIPSBUSER1/xsd/EHIPProfile_v00.xsd" ELEMENT "Profile"
3 ;
Table created.
SQL>
SQL> alter table EHIP_PROFILE
2 add CONSTRAINT EHIP_PROF_PK PRIMARY KEY(XMLDATA."ProfileID"."ID",XMLDATA."ProfileID"."Type");
Table altered.
SQL>
SQL>
SQL>
SQL>
SQL> select xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob() from dual;
XDBURITYPE('/HOME/'||USER||'/PROFILEDATA/ENRICHERPP.ID.0001.XML').GETCLOB()
<?xml version="1.0" encoding="UTF-8"?>
<!--Sample XML file generated by XMLSpy
SQL>
SQL>
SQL> insert into ehip_profile values(xmltype.createXML(xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob()));
insert into ehip_profile values(xmltype.createXML(xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob()))
ERROR at line 1:
ORA-21700: object does not exist or is marked for delete
what's the problem caused the "ORA-21700: object does not exist or is marked for delete" error?
Thanks in advance for your help?Thanks Marco,
Here're my environment:
SQL> select INSTANCE_NUMBER, INSTANCE_NAME,HOST_NAME,VERSION from v$instance;
INSTANCE_NUMBER INSTANCE_NAME HOST_NAME VERSION
2 rac32 RAC3-2 10.2.0.3.0
I followed your suggested in the above, and always purge recyclebin, but still got the same problem. because in 10gr2, there's no dbms_xmlschema.purge_schema available,
and I did checked the recyclebin after force the delete of schema, nothing inside. any other recommendation? -
DOM Parsing problems... (newbie in trouble)
I am trying to get a DOM Parser contruct a DOM Object from an XML file... I am having trouble getting the code validate against my XML Schema: <p>
<?xml version="1.0" encoding="UTF-8"?> <
<!-- edited with XML Spy v4.4 U (http://www.xmlspy.com) by Fedro E. Ponce de Leon Luengas (ASI Consulores, S.A. de C.V.) -->
<xs:schema targetNamespace="http://palaciohierro.com.mx/mde/expe" xmlns="http://palaciohierro.com.mx/mde/expe" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="existencia-peticion" type="epType">
<xs:annotation>
<xs:documentation>Peticion de existencias para la Mesa de Eventos Web</xs:documentation>
</xs:annotation>
</xs:element>
<xs:complexType name="epType">
<xs:annotation>
<xs:documentation>peticion de existencia</xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:element name="articulo" type="articuloType" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="articuloType">
<xs:annotation>
<xs:documentation>articulo</xs:documentation>
</xs:annotation>
<xs:attribute name="id_articulo" type="IdentifierType" use="required"/>
<xs:attribute name="sku" type="skuType" use="required"/>
</xs:complexType>
<xs:simpleType name="IdentifierType">
<xs:annotation>
<xs:documentation>identificador</xs:documentation>
</xs:annotation>
<xs:restriction base="xs:long">
<xs:minInclusive value="0"/>
<xs:maxInclusive value="999999999999999999"/>
<xs:totalDigits value="22"/>
<xs:fractionDigits value="0"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="skuType">
<xs:annotation>
<xs:documentation>sku</xs:documentation>
</xs:annotation>
<xs:restriction base="xs:string">
<xs:minLength value="11"/>
<xs:maxLength value="20"/>
<xs:pattern value="\d{11,20}"/>
</xs:restriction>
</xs:simpleType>
</xs:schema>
taking this sample XML file:
<?xml version="1.0" encoding="UTF-8"?>
<!--Sample XML file generated by XML Spy v4.4 U (http://www.xmlspy.com)-->
<expe:existencia-peticion xmlns:expe="http://palaciohierro.com.mx/mde/expe" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://palaciohierro.com.mx/mde/expe
C:\oracle\Oracle9iDS\jdev\mywork\testCompra\MesaEventos\src\ph\mesaeventos\schema\existencia-peticion.xsd">
<articulo id_articulo="450" sku="12245110021"/>
<articulo id_articulo="15" sku="45421213223"/>
<articulo id_articulo="12" sku="121131231858"/>
<articulo id_articulo="74" sku="4101031234545"/>
<articulo id_articulo="871" sku="022324563212"/>
</expe:existencia-peticion>
with the following code:
public Document getDOM( String existenciapeticionXML ) throws Exception
// Obtain parser instance and parse the document
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
factory.setValidating( true );
factory.setNamespaceAware( true );
DocumentBuilder builder = factory.newDocumentBuilder();
byte buf[] = existenciapeticionXML.getBytes();
ByteArrayInputStream stream = new ByteArrayInputStream( buf );
Document doc = builder.parse( stream );
return doc;
I am getting the following Exception:
oracle.xml.parser.v2.XMLParseException: Element 'expe:existencia-peticion' used but not declared.
void oracle.xml.parser.v2.XMLError.flushErrors()
XMLError.java:145
void oracle.xml.parser.v2.NonValidatingParser.parseDocument()
NonValidatingParser.java:263
void oracle.xml.parser.v2.XMLParser.parse(org.xml.sax.InputSource)
XMLParser.java:141
org.w3c.dom.Document oracle.xml.jaxp.JXDocumentBuilder.parse(org.xml.sax.InputSource)
JXDocumentBuilder.java:96
org.w3c.dom.Document javax.xml.parsers.DocumentBuilder.parse(java.io.InputStream)
DocumentBuilder.java:119
org.w3c.dom.Document ph.mesaeventos.mesa.xml.ExistenciaPeticionDOM.getDOM(java.lang.String)
ExistenciaPeticionDOM.java:26
void ph.mesaeventos.mesa.xml.Test.main(java.lang.String[])
Test.java:38
What am I doing wrong? I am clueless... please help!
Thanks,I finally managed to make it work.... well quite!
Having an XML Doc like this:
<?xml version="1.0"?>
<existencia-peticion xmlns = "http://palaciohierro.com.mx/mde/expe">
<articulo id_articulo="10" sku="00000000010"></articulo>
<articulo id_articulo="11" sku="00000000011"></articulo>
<articulo id_articulo="12" sku="00000000012"></articulo>
<articulo id_articulo="13" sku="00000000013"></articulo>
</existencia-peticion>
with an schema like:
<?xml version="1.0" encoding="UTF-8"?>
<schema targetNamespace="http://palaciohierro.com.mx/mde/expe"
xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:expe="http://palaciohierro.com.mx/mde/expe"
elementFormDefault="qualified">
<annotation>
<documentation xml:lang="es">
Esquema de peticion de existencias para la Mesa de Eventos Web
Copyright 2002 palaciodehierro.com.mx. Todos los derechos reservados.
</documentation>
</annotation>
<element name="existencia-peticion" type="expe:epType">
<unique name="id_articulo">
<selector xpath="expe:articulo"/>
<field xpath="@id_articulo"/>
</unique>
<unique name="sku">
<selector xpath="expe:articulo"/>
<field xpath="@sku"/>
</unique>
</element>
<complexType name="epType">
<annotation>
<documentation>peticion de existencias</documentation>
</annotation>
<sequence>
<element name="articulo" type="expe:articuloType" maxOccurs="unbounded"/>
</sequence>
</complexType>
<complexType name="articuloType">
<annotation>
<documentation>articulo</documentation>
</annotation>
<attribute name="id_articulo" type="expe:IdentifierType" use="required"/>
<attribute name="sku" type="expe:skuType" use="required"/>
</complexType>
<simpleType name="IdentifierType">
<annotation>
<documentation>identificador</documentation>
</annotation>
<restriction base="long">
<minInclusive value="0"/>
<maxInclusive value="999999999999999999"/>
<totalDigits value="18"/>
<fractionDigits value="0"/>
</restriction>
</simpleType>
<simpleType name="skuType">
<annotation>
<documentation>sku</documentation>
</annotation>
<restriction base="string">
<minLength value="11"/>
<maxLength value="20"/>
<pattern value="\d{11,20}"/>
</restriction>
</simpleType>
</schema>
and with the following class:
public class XMLValidator
// Instancia singleton
private static XMLValidator validator = new XMLValidator();
* Constructor privado
private XMLValidator()
* Mitodo para acceder a la instancia Singleton de XMLValidator
* @regresa <b>XMLValidator</b> La instancia de esta clase
public static XMLValidator getValidator()
return validator;
public boolean validaEsquema( String docXML, String esquema ) throws Exception
// Establece el URL correcto para el documento de esquema
XSDBuilder builder = new XSDBuilder();
URL url = createURL( esquema );
// Construye el objecto del Schema XML
try
XMLSchema schemadoc = (XMLSchema)builder.build( url );
// Valida el documento XML procesandolo contra el esquema
return validate( docXML, schemadoc );
catch( XMLParseException e )
throw new Exception( "Error al analizar el documento XML: " + e.getMessage() );
catch( Exception e )
throw new Exception( "No es posible validar con el esquema: " + e.getMessage() );
private static boolean validate(String docXML, XMLSchema schemadoc) throws Exception
boolean isValid = false;
// Crea un objeto Parser DOM de XML
DOMParser dp = new DOMParser();
// Establece el objeto Schema XML para la validacion
dp.setXMLSchema( schemadoc );
dp.setValidationMode( XMLParser.SCHEMA_VALIDATION );
dp.setPreserveWhitespace( true );
// Establece la salida de errores
dp.setErrorStream( System.out );
// Recupera los datos del documento XML en un objeto InputStream
byte[] docbytes = docXML.getBytes();
ByteArrayInputStream in = new ByteArrayInputStream( docbytes );
// Parsea el documento y validalo contra el esquema
try
dp.parse( in );
isValid = true;
catch( Exception e )
// Devuelve el documento XML DOM construido durante el parseo
return isValid;
I am able to validate when invoking with the XML and schemas in the parameters...
Problem is that I have to include the attribute xmlns = "http://palaciohierro.com.mx/mde/expe" in my XML doc.
What I really need is to be able to validate de XML doc against a stablished schema, when the XML doc does not include the
xmlns attribute. -
LPX-00004 - Problems while inserting xml files in a xmltype column
I've faced two problems while trying to insert xml files into my table containing a xmltype column:
create table xml_test (id number(20),content xmltype)
I use following java code for writing xml docs into db:
conn.setAutoCommit(false);
OraclePreparedStatement stmt = (OraclePreparedStatement)
conn.prepareStatement("INSERT INTO xml_test (id,content) VALUES(?,?)");
File file = new File(file1);
InputStream in1 = new FileInputStream(file1);
Reader r1 = new BufferedReader(new InputStreamReader(in1, "UTF-8"));
int len = 0;
StringBuffer text = new StringBuffer();
while ((len = r1.read()) != -1) {
text.append((char) len);
in1.close();
r1.close();
XMLType poXML1 = XMLType.createXML(conn, text.toString());
for (int i = 1; i <= 1; i++) {
stmt.setInt(1, i);
stmt.setObject(2, poXML1);
stmt.execute();
conn.commit();
1. problem: occures only if a xml schema has been assoicated to the specific xmltype column. it seems that the length of a specific xml tag in the document is limited. but why?
java.sql.SQLException: ORA-22814: attribute or element value is larger than specified in type
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:573)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1891)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1093)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2047)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1940)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2709)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:589)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:656)
at test.insertXML(test.java:84)
at test.main(test.java:261)
hier the xml-schema of the xmltype column "content":
<?xml version="1.0" encoding="UTF-8"?>
<!--W3C Schema generated by XML Spy v4.4 U (http://www.xmlspy.com)-->
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
<xs:element name="AUTOR-ID" type="xs:string"/>
<xs:element name="BODY" type="xs:string"/>
<xs:element name="CONTENT">
<xs:complexType>
<xs:sequence>
<xs:element ref="METADATEN"/>
<xs:element ref="BODY"/>
</xs:sequence>
<xs:attribute name="content-id" type="xs:string" use="required"/>
</xs:complexType>
</xs:element>
<xs:element name="DATUM" type="xs:string"/>
<xs:element name="KEYWORD" type="xs:string"/>
<xs:element name="METADATEN">
<xs:complexType>
<xs:sequence>
<xs:element ref="DATUM"/>
<xs:element ref="TITEL" maxOccurs="unbounded"/>
<xs:element ref="KEYWORD" maxOccurs="unbounded"/>
<xs:element ref="AUTOR-ID"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="TITEL" type="xs:string"/>
</xs:schema>
2. problem: hier i have no idea what is happening ... please help
java.sql.SQLException: ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00004: internal error "MultiChar overflow"
Error at line 61
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:573)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1891)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1093)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2047)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1940)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2709)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:589)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:656)
at test.insertXML(test.java:53)
at test.main(test.java:259)It's hard for me to tell you more without seeing your instance data, but for problem #1, if you look at the underlying SQL types being generated by your schema, you will see that the default SQL mapping for a "string" in your schema is a VARCHAR2(4000) (and I believe this would be only 2000 for a varying width character set like UTF8).
You can specify that you wish this column to be mapped as a CLOB in your schema if this is the problem. Also note that there is a 64K limit on the size of an individual node in XMLType. -
Problem in JMS-Adapter with CharacterSet Websphere MQ
Hi,
we have the following scenario:
JMS -> PI -> File
We have a local Websphere MQ Queue Manager and the follwoing configuration in our sender adapter:
Transport-Protocol: WebSphere MQ (non JMS)
Message-Protocol: JMS 1.x
ConnectionFactory: com.ibm.mq.jms.MQQueueConnectionFactory
Java-class Queue: com.ibm.mq.jms.MQQueue
CCSID: 819
Transport: TCP/IP
JMS-conform: WebSphere MQ (non JMS)
In the local queue manager the messages (XML-Messages with header <?xml version="1.0" encoding="ISO-8859-1"?>) have characterSet 819 (ISO-8859-1). That's correct. You can open the files with XMLSpy and it works.
When we receive the messages by our JMS Sender Adapter all the character seems to be in UTF-8 and I don't know why. All the special characters are wrong cause the header of the XML-message shows ISO-8859-1 but all the signs are decoded in UTF-8.
In the other direction (JMS Receiver adapter, File -> PI - JMS) we have the same problem.
We create a ISO-8859-1 message in mapping (and it is really ISO-8859-1) and send it via JMS Receiver Adapter to the local message queue. But there the message arrives in UTF-8 encoding. I don't understand this.
Does anybody know what could be the cause for this?
Does the JMS adapter convert the messages from ISO-8859-1 into UTF-8?
Are there any parameters we have to set?
I hope anybody has an idea what's wrong.
Regards
Thorsten
Edited by: Thorsten Hautz on Oct 12, 2010 5:42 PMHi,
thanks a lot for your replies.
our driver settings are correct (as I can see).
I removed value 819 from CCSID, but we have the same effect.
The messages in the local queue manager are TextMessages in XML.
Does anybody know, if we need the standard modules (ConvertJMSMessageToBinary and ConvertBinaryToXMBMessage) in this case?
Is it possible to set the CCSID for the message payload anywhere in the configuration?
The CCSID in the Source tab doesn't have any influence to the encoding of the payload message, only to the header data.
Regards
Thorsten -
XI Soap Adapter: problems in parsing XML
Hallo,
I call a Web Service using XMLSpy and this is the response (note tag <File>):
<SOAPSDK4:ExpBaselineResponse xmlns:SOAPSDK4="http://tempuri.org/PRWBS_PRIMAVERA/message/">
<RESULT>OK</RESULT>
<File><?xml version='1.0' encoding='UTF-8'?>
<Dati:Parametri xmlns:Dati="Schema">
<ELSAG xmlns="Schema">
<proj_id>4623</proj_id>
<BS_short_name>FS0084AAAA01 - B1</BS_short_name>
<BS_proj_id>1302</BS_proj_id>
<TARGET_START>2004-04-01</TARGET_START>
....etc...
If I call the same Web Service from XI, this is the response:
<SOAPSDK4:ExpBaselineResponse xmlns:SOAPSDK4="http://tempuri.org/PRWBS_PRIMAVERA/message/" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAPSDK3="http://schemas.xmlsoap.org/soap/encoding/" xmlns:SOAPSDK2="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAPSDK1="http://www.w3.org/2001/XMLSchema">
<RESULT>OK</RESULT>
<File><?xml version="1.0" standalone="yes"?>
<Dati:Parametri xmlns:Dati="Schema">
<ELSAG xmlns="Schema">
<proj_id>4623</proj_id>
<BS_short_name>FS0084AAAA01 - B1</BS_short_name>
<BS_proj_id>1302</BS_proj_id>
<TARGET_START>2004-04-01</TARGET_START>
....etc....
In my flow, I use a java mapping to parse the content of tag <File> into a message.
My mapping works correctly only with the first option.
Is it possible to change XI Soap Adapter encoding for HTML?
My java mapping uses this parser:
public void execute(InputStream MyInputStream, OutputStream MyOutputStream)
throws StreamTransformationException {
SAXReader reader = new SAXReader();
Document document;
try {
document = reader.read(MyInputStream);
this instruction generates an Exception only with XI message.
Can anybody help me??
Thanks;-)Hi,
I would suggest you go through this Pdf for the SOAP Adapter configuration:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/40728f7b-0401-0010-d9bc-8c73884a3789
And also have a glance on the info for webservices given below,
Just go through these links and they will surely help you learn more about Webservices:
<a href="/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi Webservices using SAPXI</a>
<a href="/people/siva.maranani/blog/2005/05/23/communication-between-sap-system-webservice-using-proxies between SAP System & Webservice Using Proxies</a>
You can Go through these links to get some info about accessing Webservices:
http://help.sap.com/saphelp_nw04/helpdata/en/d6/f9bc3d52f39d33e10000000a11405a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/b7/d7baaf1481a349ab723e3acd7334b3/content.htm
Go through these links which will surely help you find an answer to your problem.....
Regards,
Abhy -
Hi,
After reading through the forums I understood that SOAP adapter turns green only with the first message.
I have set everything up and sending a test message with XML Spy:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<SOAP-ENV:Body>
<m:SIMPLE_OUT_MI xmlns:m="http://test.com/soapTest">
<TEXT>TEST</TEXT>
</m:SIMPLE_OUT_MI>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
XMLSpy returns me an empty message back:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header/>
<SOAP:Body/>
</SOAP:Envelope>
I can not see the message in SXMB_MONI and the adapter stays gray.
Where do I look for the problem ?Hi Vick,
Try like this......in ID from your sender agreement in which you have your sender SOAP comm channel, from menu select Display WSDL and then copy the WSDL URL and give it to source applications to use it.............create a service user for them to access PI 7.1 server while sending the SOAP req msg.............
your source applications may have to generate proxy from this WSDL URL in their application and then they can send a SOAP req msg to your PI 7.1 server............
Regards,
Rajeev Gupta -
Problems with SOAP Adapter/Interface
Hi Experts,
we currently try and experiment with XI 3.0 Stack 09 and the SOAP adapter respectively.
We started with a simple interface (foo..., see wsdl attachment) that we want to provide by XI.
All configurations (SLD, Integration Repository, Integration Directory) should have been done accordingly as we suppose, similar to other szenarios we have already implemented.
When we send a SOAP request based on a generated wsdl to XI we get the exception at the bottom of this text, containing e.g.
com.sap.aii.messaging.srt.BubbleException: error during conversion [null "null"];
com.sap.aii.messaging.util.XMLScanException: Parsing an empty source. Root element expected!
For sending the SOAP message we used XMLSpy.
Did someone have similar problems or can give us an working WSDL example, or some hint?
Thanks in advance,
Klaus Lukas
foo.wsdl
<?xml version="1.0" encoding="ISO-8859-1"?>
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:p1="urn://poreceive.xi.pse.siemens.com" targetNamespace="urn://poreceive.xi.pse.siemens.com" name="foo_out_sync">
<wsdl:types>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn://poreceive.xi.pse.siemens.com" targetNamespace="urn://poreceive.xi.pse.siemens.com">
<xsd:element name="foo" type="foo_DT"/>
<xsd:complexType name="foo_DT">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fe0bb241d2a011d9cd15e9729ee2f568
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="item" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fe0bb240d2a011d9acede9729ee2f568
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</wsdl:types>
<wsdl:message name="foo">
<wsdl:part name="foo" element="p1:foo"/>
</wsdl:message>
<wsdl:portType name="foo_out_sync">
<wsdl:operation name="foo_out_sync">
<wsdl:input message="p1:foo"/>
<wsdl:output message="p1:foo"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="foo_out_syncBinding" type="p1:foo_out_sync">
<soap:binding xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="foo_out_sync">
<wsdl:input>
<soap:body xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="foo_out_syncService">
<wsdl:port name="foo_out_syncPort" binding="p1:foo_out_syncBinding">
<soap:address location="http://xxxxxxxx:8000/XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out&version=3.0&Sender.Service=Foo_SOAP_Service&Interface=urn%3A%2F%2Fporeceive.xi.pse.siemens.com%5Efoo_out_sync" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
soap message incl. error
<?xml version="1.0"?>
<!-- see thedocumentation -->
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>error during
conversion</faultstring>
<detail>
<s:SystemError
xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>XMLScanException</code>
<text><![CDATA[
com.sap.aii.af.mp.module.ModuleException
at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process
(XISOAPAdapterBean.java:697)
at
com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl3.process
(ModuleLocalLocalObjectImpl3.java:103)
at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process
(ModuleProcessorBean.java:221)
at
com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process
(ModuleProcessorLocalLocalObjectImpl0.java:103)
at com.sap.aii.af.mp.soap.web.MessageServlet.doPost
(MessageServlet.java:543)
at javax.servlet.http.HttpServlet.service
(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service
(HttpServlet.java:853)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet
(HttpHandlerImpl.java:385)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleReques
t(HttpHandlerImpl.java:263)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:340)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:318)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebConta
iner(RequestAnalizer.java:821)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.handle
(RequestAnalizer.java:239)
at com.sap.engine.services.httpserver.server.Client.handle
(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request
(Processor.java:147)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessio
nMessageListener.process(ApplicationSessionMessageListener.java:37)
at
com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner
.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:162)
Caused by: com.sap.aii.messaging.srt.BubbleException: error during
conversion [null "null"]; nested exception caused by:
com.sap.aii.messaging.util.XMLScanException: Parsing an empty source.
Root element expected!
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.onResponseToWS
(XMBWebServiceExtension.java:936)
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.invokeOnResponse
(XMBWebServiceExtension.java:602)
at com.sap.aii.messaging.srt.ExtensionBubble.onMessage
(ExtensionBubble.java:58)
at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process
(XISOAPAdapterBean.java:576)
... 20 more
Caused by: com.sap.aii.messaging.util.XMLScanException: Parsing an
empty source. Root element expected!
at com.sap.aii.messaging.util.StreamXMLScannerImpl.open
(StreamXMLScannerImpl.java:104)
at com.sap.aii.messaging.mo.DefaultItem.setData
(DefaultItem.java:294)
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.makeItemFromPayload
(XMBWebServiceExtension.java:972)
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.onResponseToWS
(XMBWebServiceExtension.java:879)
... 23 more
]]></text>
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>Hi Klaus
In your wsdl file the soap address tag (given below)
<b><soap:address location="http://xxxxxxxx:8000/XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out&version=3.0&Sender.Service=Foo_SOAP_Service&Interface=urn%3A%2F%2Fporeceive.xi.pse.siemens.com%5Efoo_out_sync" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"/></b>
is to be edited as
<b><soap:address location="http://xxxxxxxx:50000//XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out" /></b>
because the soap address format should be like :
<i>http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel</i>
For more information :
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
Hope this will be helpful.
Regards
Suraj -
Problem using existsnode from view
I am having a problem using existsnode from a view. I am currently using 10.2.0.3
example
CREATE OR REPLACE VIEW XML_PERSON_ASSOCIATION
(PERSON)
AS
select
xmlelement("Person",
xmlforest(
extractvalue(value(p),'/Person/PersonID') "PersonID",
extractvalue(value(p),'/Person/Prefix') "Prefix",
extractvalue(value(p),'/Person/FirstName') "FirstName",
extractvalue(value(p),'/Person/MiddleName') "MiddleName",
extractvalue(value(p),'/Person/LastName') "LastName",
extractvalue(value(p),'/Person/Suffix') "Suffix",
extractvalue(value(p),'/Person/PreferredName') "PreferredName",
extractvalue(value(p),'/Person/Gender') "Gender",
extractvalue(value(p),'/Person/PrimaryLanguage') "PrimaryLanguage",
extractvalue(value(p),'/Person/RecordStatus') "RecordStatus",
extractvalue(value(p),'/Person/ImportedDate') "ImportedDate",
(select
xmlagg(
xmlelement("Association",
xmlforest(
extractvalue(value(oa),'/OrganizationPersonAssoc/Name') "Name",
extractvalue(value(ot),'/OrganizationType/OrganizationID') "OrganizationID",
extractvalue(value(ot),'/OrganizationType/Type') "OrganizationType",
extractvalue(value(a),'/Association/Role') "Role",
extractvalue(value(a),'/Association/RecordStatus') "RecordStatus",
extractvalue(value(oa),'/OrganizationPersonAssoc/ImportedDate') "ImportedDate"
xmlelement("PersonTypes",
extract(value(per),'/Person/PersonTypes/PersonType')
xmlelement("Addresses",
extract(value(a),'/Association/Addresses/Address')
xmlelement("ContactMechanisms",
extract(value(a),'/Association/ContactMechanisms/ContactMechanism')
from org_person_assoc oa,
table(xmlsequence(extract(value(oa),'/OrganizationPersonAssoc/OrganizationTypes/OrganizationType'))) ot,
table(xmlsequence(extract(value(ot),'/OrganizationType/Associations/Association'))) a,
table(xmlsequence(extract(value(a),'/Association/Persons/Person'))) per
where extractvalue(value(per),'/Person/PersonID') = extractvalue(value(p),'/Person/PersonID')
) "Associations"
) person
from person p
/When I run the following statment
select person
from xml_person_association o
where existsnode(person,'/Person/Associations/Association[OrganizationID=30097]')=1;
I get no records returned. Now if I used the extract function and use the same path that's in the existsnode clause I get a record returned.
select extract(person,'/Person/Associations/Association')
from xml_person_association o
where existsnode(person,'/Person/Associations/Association[OrganizationID=30097]')=1;
<Association>
<Name>TEST DATA</Name>
<OrganizationID>30097</OrganizationID>
</Association>
If I run the same style of existsnode statment against a table directly instead of a view I am not required to use an extract caluse that has the same path that is used in the existsnode clause.
Thanks for the help.
Message was edited by:
mdrakeTesting in 11g I get
SQL>
SQL>
SQL> set echo on
SQL> spool testcase.log
SQL> --
SQL> connect sys/ as sysdba
Enter password:
Connected.
SQL> set define on
SQL> set timing on
SQL> --
SQL> define USERNAME = XDBTEST
SQL> --
SQL> def PASSWORD = XDBTEST
SQL> --
SQL> def USER_TABLESPACE = USERS
SQL> --
SQL> def TEMP_TABLESPACE = TEMP
SQL> --
SQL> drop user &USERNAME cascade
2 /
old 1: drop user &USERNAME cascade
new 1: drop user XDBTEST cascade
User dropped.
Elapsed: 00:00:09.42
SQL> grant connect, resource to &USERNAME identified by &PASSWORD
2 /
old 1: grant connect, resource to &USERNAME identified by &PASSWORD
new 1: grant connect, resource to XDBTEST identified by XDBTEST
Grant succeeded.
Elapsed: 00:00:00.03
SQL> grant create any directory, drop any directory to &USERNAME
2 /
old 1: grant create any directory, drop any directory to &USERNAME
new 1: grant create any directory, drop any directory to XDBTEST
Grant succeeded.
Elapsed: 00:00:00.00
SQL> grant alter session, create view to &USERNAME
2 /
old 1: grant alter session, create view to &USERNAME
new 1: grant alter session, create view to XDBTEST
Grant succeeded.
Elapsed: 00:00:00.00
SQL> alter user &USERNAME default tablespace &USER_TABLESPACE temporary tablespace &TEMP_TABLESPACE
2 /
old 1: alter user &USERNAME default tablespace &USER_TABLESPACE temporary tablespace &TEMP_TABLESPACE
new 1: alter user XDBTEST default tablespace USERS temporary tablespace TEMP
User altered.
Elapsed: 00:00:00.00
SQL> connect &USERNAME/&PASSWORD
Connected.
SQL> --
SQL> alter session set events ='19027 trace name context forever, level 0x800'
2 /
Session altered.
Elapsed: 00:00:00.00
SQL> var xmlText1 clob
SQL> var xmlText2 clob
SQL> var xmlSchema clob
SQL> var schemaURL varchar2(256)
SQL> --
SQL> begin
2 :schemaURL := 'mcs.xsd';
3 :xmlSchema :=
4 '<!-- edited with XMLSpy v2007 sp2 (http://www.altova.com) by Shaun (PPD Inc) --> <s:schema xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:xdb=
"http://xmlns.oracle.com/xdb" elementFormDefault="qualified" xdb:storeVarrayAsTable="true">
5 <s:element name="Organization" type="Organization" xdb:defaultTable="ORG"/>
6 <s:element name="Person" type="Person" xdb:defaultTable="PERSON"/>
7 <s:element name="OrganizationPersonAssoc" type="Organization" xdb:defaultTable="ORG_PERSON_ASSOC"/>
8 <s:complexType name="Organization" xdb:SQLType="Organization">
9 <s:sequence minOccurs="0">
10 <s:element name="Name" type="s:string" nillable="true"/>
11 <s:element name="LongName" type="s:string" nillable="true"/>
12 <s:element name="Description" type="s:string" nillable="true"/>
13 <s:element name="FWANumber" type="s:string" nillable="true"/>
14 <s:element name="GUID" type="s:string" nillable="true"/>
15 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
16 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
17 <s:element name="RecordStatus" type="s:string" nillable="true"/>
18 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
19 <s:element name="OrganizationTypes" type="ArrayOfOrganizationType" minOccurs="0"/>
20 <s:element name="OrganizationSynonyms" type="ArrayOfOrganizationSynonym"/>
21 <s:element name="ImportedDate" type="s:date"/>
22 </s:sequence>
23 </s:complexType>
24 <s:complexType name="ArrayOfOrganizationType" xdb:SQLType="ArrayOfOrganizationType">
25 <s:sequence minOccurs="0">
26 <s:element name="OrganizationType" type="OrganizationType" minOccurs="0" maxOccurs="unbounded"/>
27 </s:sequence>
28 </s:complexType>
29 <s:complexType name="OrganizationType" xdb:SQLType="OrganizationType">
30 <s:sequence minOccurs="0">
31 <s:element name="OrganizationID" type="s:string"/>
32 <s:element name="Type" type="s:string" nillable="true"/>
33 <s:element name="QCDoneStatus" type="s:string" nillable="true"/>
34 <s:element name="QCDoneStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
35 <s:element name="SiteEstablishmentStatus" type="s:string" nillable="true"/>
36 <s:element name="SiteEstablishmentStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
37 <s:element name="IPFNumber" type="s:int"/>
38 <s:element name="DUNSNumber" type="s:int"/>
39 <s:element name="GUID" type="s:string" nillable="true"/>
40 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
41 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
42 <s:element name="RecordStatus" type="s:string" nillable="true"/>
43 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
44 <s:element name="LegacyCodes" type="ArrayOfLegacyCode" minOccurs="0"/>
45 <s:element name="Addresses" type="ArrayOfAddress" minOccurs="0"/>
46 <s:element name="ContactMechanisms" type="ArrayOfContactMechanism" minOccurs="0"/>
47 <s:element name="Associations" type="ArrayOfAssociation" minOccurs="0"/>
48 </s:sequence>
49 </s:complexType>
50 <s:complexType name="ArrayOfLegacyCode" xdb:SQLType="ArrayOfLegacyCode">
51 <s:sequence minOccurs="0">
52 <s:element name="LegacyCode" type="LegacyCode" minOccurs="0" maxOccurs="unbounded"/>
53 </s:sequence>
54 </s:complexType>
55 <s:complexType name="LegacyCode" xdb:SQLType="LegacyCode">
56 <s:sequence minOccurs="0">
57 <s:element name="Code" type="s:string" nillable="true"/>
58 <s:element name="NetworkID" type="s:string"/>
59 <s:element name="GUID" type="s:string" nillable="true"/>
60 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
61 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
62 <s:element name="RecordStatus" type="s:string" nillable="true"/>
63 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
64 </s:sequence>
65 </s:complexType>
66 <s:complexType name="ArrayOfAddress" xdb:SQLType="ArrayOfAddress">
67 <s:sequence minOccurs="0">
68 <s:element name="Address" type="Address" minOccurs="0" maxOccurs="unbounded"/>
69 </s:sequence>
70 </s:complexType>
71 <s:complexType name="Address" xdb:SQLType="Address">
72 <s:sequence minOccurs="0">
73 <s:element name="StreetName1" type="s:string" nillable="true"/>
74 <s:element name="StreetName2" type="s:string" nillable="true"/>
75 <s:element name="StreetName3" type="s:string" nillable="true"/>
76 <s:element name="StreetName4" type="s:string" nillable="true"/>
77 <s:element name="CityName" type="s:string" nillable="true"/>
78 <s:element name="CityGUID" type="s:string" nillable="true"/>
79 <s:element name="CityCreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
80 <s:element name="CityLastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
81 <s:element name="CityRecordStatus" type="s:string" nillable="true"/>
82 <s:element name="CityRecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
83 <s:element name="StateName" type="s:string" nillable="true"/>
84 <s:element name="StateGUID" type="s:string" nillable="true"/>
85 <s:element name="StateCreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
86 <s:element name="StateLastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
87 <s:element name="StateRecordStatus" type="s:string" nillable="true"/>
88 <s:element name="StateRecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
89 <s:element name="CountryName" type="s:string" nillable="true"/>
90 <s:element name="CountryCode" type="s:string" nillable="true"/>
91 <s:element name="CountryGUID" type="s:string" nillable="true"/>
92 <s:element name="CountryCreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
93 <s:element name="CountryLastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
94 <s:element name="CountryRecordStatus" type="s:string" nillable="true"/>
95 <s:element name="CountryRecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
96 <s:element name="ZipPostalCode" type="s:string" nillable="true"/>
97 <s:element name="GUID" type="s:string" nillable="true"/>
98 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
99 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
100 <s:element name="RecordStatus" type="s:string" nillable="true"/>
101 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
102 <s:element name="Type" type="s:string" nillable="true"/>
103 <s:element name="TypeOtherSpecify" type="s:string" nillable="true"/>
104 <s:element name="InternalOffice" type="s:string" nillable="true"/>
105 <s:element name="MailStopCode" type="s:string" nillable="true"/>
106 <s:element name="PreferredFlag" type="s:string" nillable="true"/>
107 <s:element name="ActiveFromDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
108 <s:element name="QCDoneStatus" type="s:string" nillable="true"/>
109 <s:element name="QCDoneStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
110 </s:sequence>
111 </s:complexType>
112 <s:complexType name="ArrayOfContactMechanism" xdb:SQLType="ArrayOfContactMechanism">
113 <s:sequence minOccurs="0">
114 <s:element name="ContactMechanism" type="ContactMechanism" minOccurs="0" maxOccurs="unbounded"/>
115 </s:sequence>
116 </s:complexType>
117 <s:complexType name="ContactMechanism" xdb:SQLType="ContactMechanism">
118 <s:sequence minOccurs="0">
119 <s:element name="ContactType" type="s:string" nillable="true"/>
120 <s:element name="ContactTypeOtherSpecify" type="s:string" nillable="true"/>
121 <s:element name="ContactValue" type="s:string" nillable="true"/>
122 <s:element name="ContactAreaCode" type="s:string" nillable="true"/>
123 <s:element name="ContactCountryCallingCode" type="s:int"/>
124 <s:element name="ContactTollFreeFlag" type="s:string" nillable="true"/>
125 <s:element name="ContactGUID" type="s:string" nillable="true"/>
126 <s:element name="ContactCreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
127 <s:element name="ContactLastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
128 <s:element name="ContactRecordStatus" type="s:string" nillable="true"/>
129 <s:element name="ContactRecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
130 <s:element name="Role" type="s:string" nillable="true"/>
131 <s:element name="PhoneExtension" type="s:string" nillable="true"/>
132 <s:element name="QCDoneStatus" type="s:string" nillable="true"/>
133 <s:element name="QCDoneStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
134 <s:element name="ActiveFromDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
135 <s:element name="GUID" type="s:string" nillable="true"/>
136 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
137 <s:element name="ModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
138 <s:element name="PreferredFlag" type="s:string" nillable="true"/>
139 <s:element name="RecordStatus" type="s:string" nillable="true"/>
140 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
141 </s:sequence>
142 </s:complexType>
143 <s:complexType name="ArrayOfAssociation" xdb:SQLType="ArrayOfAssociation">
144 <s:sequence minOccurs="0">
145 <s:element name="Association" type="Association" minOccurs="0" maxOccurs="unbounded"/>
146 </s:sequence>
147 </s:complexType>
148 <s:complexType name="Association" xdb:SQLType="Association">
149 <s:sequence minOccurs="0">
150 <s:element name="Role" type="s:string" nillable="true"/>
151 <s:element name="GUID" type="s:string" nillable="true"/>
152 <s:element name="QCDoneStatus" type="s:string" nillable="true"/>
153 <s:element name="QCDoneStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
154 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
155 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
156 <s:element name="RecordStatus" type="s:string" nillable="true"/>
157 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
158 <s:element name="Addresses" type="ArrayOfAddress" minOccurs="0"/>
159 <s:element name="ContactMechanisms" type="ArrayOfContactMechanism" minOccurs="0"/>
160 <s:element name="Persons" type="ArrayOfPerson" minOccurs="0"/>
161 </s:sequence>
162 </s:complexType>
163 <s:complexType name="ArrayOfPerson" xdb:SQLType="ArrayOfPerson">
164 <s:sequence minOccurs="0">
165 <s:element name="Person" type="Person" minOccurs="0" maxOccurs="unbounded"/>
166 </s:sequence>
167 </s:complexType>
168 <s:complexType name="Person" xdb:SQLType="Person">
169 <s:sequence minOccurs="0">
170 <s:element name="PersonID" type="s:int"/>
171 <s:element name="Prefix" type="s:string" nillable="true"/>
172 <s:element name="FirstName" type="s:string" nillable="true"/>
173 <s:element name="MiddleName" type="s:string" nillable="true"/>
174 <s:element name="LastName" type="s:string" nillable="true"/>
175 <s:element name="Suffix" type="s:string" nillable="true"/>
176 <s:element name="PreferredName" type="s:string" nillable="true"/>
177 <s:element name="Gender" type="s:string" nillable="true"/>
178 <s:element name="PrimaryLanguage" type="s:string" nillable="true"/>
179 <s:element name="GUID" type="s:string" nillable="true"/>
180 <s:element name="RecordStatus" type="s:string" nillable="true"/>
181 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
182 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
183 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
184 <s:element name="QCDoneStatus" type="s:string" nillable="true"/>
185 <s:element name="QCDoneStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
186 <s:element name="PersonDegrees" type="ArrayOfPersonDegree" minOccurs="0"/>
187 <s:element name="PersonSpecialties" type="ArrayOfPersonSpecialty" minOccurs="0"/>
188 <s:element name="PersonTypes" type="ArrayOfPersonType" minOccurs="0"/>
189 <s:element name="Addresses" type="ArrayOfAddress" minOccurs="0"/>
190 <s:element name="ContactMechanisms" type="ArrayOfContactMechanism" minOccurs="0"/>
191 <s:element name="ImportedDate" type="s:date"/>
192 </s:sequence>
193 </s:complexType>
194 <s:complexType name="ArrayOfPersonDegree" xdb:SQLType="ArrayOfPersonDegree">
195 <s:sequence minOccurs="0">
196 <s:element name="PersonDegree" type="PersonDegree" minOccurs="0" maxOccurs="unbounded"/>
197 </s:sequence>
198 </s:complexType>
199 <s:complexType name="PersonDegree" xdb:SQLType="PersonDegree">
200 <s:sequence minOccurs="0">
201 <s:element name="Code" type="s:string" nillable="true"/>
202 <s:element name="Major" type="s:string" nillable="true"/>
203 <s:element name="ListingOrder" type="s:int"/>
204 <s:element name="GUID" type="s:string" nillable="true"/>
205 <s:element name="RecordStatus" type="s:string" nillable="true"/>
206 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
207 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
208 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
209 </s:sequence>
210 </s:complexType>
211 <s:complexType name="ArrayOfPersonSpecialty" xdb:SQLType="ArrayOfPersonSpecialty">
212 <s:sequence minOccurs="0">
213 <s:element name="PersonSpecialty" type="PersonSpecialty" minOccurs="0" maxOccurs="unbounded"/>
214 </s:sequence>
215 </s:complexType>
216 <s:complexType name="PersonSpecialty" xdb:SQLType="PersonSpecialty">
217 <s:sequence minOccurs="0">
218 <s:element name="Name" type="s:string" nillable="true"/>
219 <s:element name="GUID" type="s:string" nillable="true"/>
220 <s:element name="RecordStatus" type="s:string" nillable="true"/>
221 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
222 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
223 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
224 </s:sequence>
225 </s:complexType>
226 <s:complexType name="ArrayOfPersonType" xdb:SQLType="ArrayOfPersonType">
227 <s:sequence minOccurs="0">
228 <s:element name="PersonType" type="PersonType" minOccurs="0" maxOccurs="unbounded"/>
229 </s:sequence>
230 </s:complexType>
231 <s:complexType name="PersonType" xdb:SQLType="PersonType">
232 <s:sequence minOccurs="0">
233 <s:element name="Type" type="s:string" nillable="true"/>
234 <s:element name="GUID" type="s:string" nillable="true"/>
235 <s:element name="RecordStatus" type="s:string" nillable="true"/>
236 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
237 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
238 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
239 <s:element name="QCDoneStatus" type="s:string" nillable="true"/>
240 <s:element name="QCDoneStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
241 </s:sequence>
242 </s:complexType>
243 <s:complexType name="ArrayOfOrganizationSynonym" xdb:SQLType="ArrayOfOrganizationSynonym">
244 <s:sequence minOccurs="0">
245 <s:element name="OrganizationSynonym" type="OrganizationSynonym" minOccurs="0" maxOccurs="unbounded"/>
246 </s:sequence>
247 </s:complexType>
248 <s:complexType name="OrganizationSynonym" xdb:SQLType="OrganizationSynonym">
249 <s:sequence minOccurs="0">
250 <s:element name="Name" type="s:string" nillable="true"/>
251 <s:element name="GUID" type="s:string" nillable="true"/>
252 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
253 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
254 <s:element name="RecordStatus" type="s:string" nillable="true"/>
255 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
256 </s:sequence>
257 </s:complexType>
258 </s:schema>';
259 :xmltext1 :=
260 '<?xml version="1.0" encoding="WINDOWS-1252"?> <Person xsi:noNamespaceSchemaLocation="mcs.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns
:xsi="http://www.w3.org/2001/XMLSchema-instance">
261 <PersonID>100448</PersonID>
262 <Prefix/>
263 <FirstName>John</FirstName>
264 <MiddleName/>
265 <LastName>Doe</LastName>
266 <Suffix/>
267 <PreferredName/>
268 <Gender/>
269 <PrimaryLanguage xsi:nil="true"/>
270 <GUID>ffff-ffff-ffff</GUID>
271 <RecordStatus>Active</RecordStatus>
272 <RecordStatusDate>2007-04-29T00:11:50.750000-04:00</RecordStatusDate>
273 <CreatedDate>2006-06-13T00:57:21.090000-04:00</CreatedDate>
274 <LastModifiedDate>2007-04-29T00:11:50.770000-04:00</LastModifiedDate>
275 <QCDoneStatus>Yes</QCDoneStatus>
276 <QCDoneStatusDate>2006-06-13T00:57:22.977000-04:00</QCDoneStatusDate>
277 <PersonDegrees>
278 <PersonDegree>
279 <Code>B.S.</Code>
280 <Major xsi:nil="true"/>
281 <ListingOrder>1</ListingOrder>
282 <GUID>d01bbcfd-9d48-47bf-818d-9957b907a664</GUID>
283 <RecordStatus>Active</RecordStatus>
284 <RecordStatusDate>2006-10-05T10:48:04.430000-04:00</RecordStatusDate>
285 <CreatedDate>2006-10-05T10:48:06.520000-04:00</CreatedDate>
286 <LastModifiedDate>2006-10-05T10:48:06.520000-04:00</LastModifiedDate>
287 </PersonDegree>
288 </PersonDegrees>
289 <PersonSpecialties/>
290 <PersonTypes>
291 <PersonType>
292 <Type>Resource Personnel</Type>
293 <GUID>3049ddcd-3590-4fd9-a534-e2cea5b82c09</GUID>
294 <RecordStatus>Active</RecordStatus>
295 <RecordStatusDate>2006-06-13T00:57:22.977000-04:00</RecordStatusDate>
296 <CreatedDate>2006-06-13T00:57:21.090000-04:00</CreatedDate>
297 <LastModifiedDate>2007-04-29T00:11:50.817000-04:00</LastModifiedDate>
298 <QCDoneStatus>Yes</QCDoneStatus>
299 <QCDoneStatusDate>2006-06-13T00:57:22.977000-04:00</QCDoneStatusDate>
300 </PersonType>
301 </PersonTypes>
302 <Addresses/>
303 <ContactMechanisms/>
304 <ImportedDate>2007-04-30</ImportedDate>
305 </Person>';
306 :xmltext2 :=
307 '<?xml version="1.0" encoding="WINDOWS-1252"?> <OrganizationPersonAssoc xsi:noNamespaceSchemaLocation="mcs.xsd" xmlns:xsd="http://www.w3.org/2001
/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
308 <Name>Org Name Office</Name>
309 <LongName>Long Name</LongName>
310 <Description xsi:nil="true"/>
311 <FWANumber xsi:nil="true"/>
312 <GUID>dddd-dddd</GUID>
313 <CreatedDate>2006-05-18T18:59:01.500000-04:00</CreatedDate>
314 <LastModifiedDate>2006-05-18T18:59:01.500000-04:00</LastModifiedDate>
315 <RecordStatus>Active</RecordStatus>
316 <RecordStatusDate>2006-05-18T18:59:01.500000-04:00</RecordStatusDate>
317 <OrganizationTypes>
318 <OrganizationType>
319 <OrganizationID>30097</OrganizationID>
320 <Type>Agency</Type>
321 <QCDoneStatus>Yes</QCDoneStatus>
322 <QCDoneStatusDate>2006-05-18T18:59:01.513000-04:00</QCDoneStatusDate>
323 <SiteEstablishmentStatus xsi:nil="true"/>
324 <SiteEstablishmentStatusDate>0001-01-01T00:00:00.000000-05:00</SiteEstablishmentStatusDate>
325 <IPFNumber>0</IPFNumber>
326 <DUNSNumber>0</DUNSNumber>
327 <GUID>cfe9e9e0-68a3-45c9-81c0-74848523133b</GUID>
328 <CreatedDate>2006-05-18T18:59:01.513000-04:00</CreatedDate>
329 <LastModifiedDate>2006-05-18T18:59:01.513000-04:00</LastModifiedDate>
330 <RecordStatus>Active</RecordStatus>
331 <RecordStatusDate>2006-05-18T18:59:01.513000-04:00</RecordStatusDate>
332 <Associations>
333 <Association>
334 <Role>Employee</Role>
335 <GUID>9a9a9a-ababab</GUID>
336 <QCDoneStatus>Yes</QCDoneStatus>
337 <QCDoneStatusDate>2006-06-13T01:29:09.030000-04:00</QCDoneStatusDate>
338 <CreatedDate>2006-06-13T01:29:09.030000-04:00</CreatedDate>
339 <LastModifiedDate>2006-07-25T15:27:23.783000-04:00</LastModifiedDate>
340 <RecordStatus>Active</RecordStatus>
341 <RecordStatusDate>2006-06-13T01:29:09.030000-04:00</RecordStatusDate>
342 <Addresses>
343 <Address>
344 <StreetName1>123 Front St.</StreetName1>
345 <StreetName2 xsi:nil="true"/>
346 <StreetName3 xsi:nil="true"/>
347 <StreetName4 xsi:nil="true"/>
348 <CityName>City</CityName>
349 <CityGUID>234234</CityGUID>
350 <CityCreatedDate>2006-05-08T20:06:45.143000-04:00</CityCreatedDate>
351 <CityLastModifiedDate>2006-05-08T20:06:45.143000-04:00</CityLastModifiedDate>
352 <CityRecordStatus>Active</CityRecordStatus>
353 <CityRecordStatusDate>2006-05-08T20:06:45.143000-04:00</CityRecordStatusDate>
354 <StateName>New York</StateName>
355 <StateGUID>9fd469e1-4d4a-4f38-9def-50038e5ecca2</StateGUID>
356 <StateCreatedDate>2006-04-22T16:09:35.830000-04:00</StateCreatedDate>
357 <StateLastModifiedDate>2006-04-22T16:09:35.830000-04:00</StateLastModifiedDate>
358 <StateRecordStatus>Active</StateRecordStatus>
359 <StateRecordStatusDate>2006-04-22T16:09:35.830000-04:00</StateRecordStatusDate>
360 <CountryName>United States</CountryName>
361 <CountryCode>USA</CountryCode>
362 <CountryGUID>532d35dd-3a49-408a-a416-20c41e9c7997</CountryGUID>
363 <CountryCreatedDate>2006-04-22T15:30:47.000000-04:00</CountryCreatedDate>
364 <CountryLastModifiedDate>2006-04-22T15:30:47.000000-04:00</CountryLastModifiedDate>
365 <CountryRecordStatus>Active</CountryRecordStatus>
366 <CountryRecordStatusDate>2006-04-22T15:30:47.000000-04:00</CountryRecordStatusDate>
367 <ZipPostalCode>12345</ZipPostalCode>
368 <GUID>b2414fa9-7375-4d26-8d76-89a6915d6751</GUID>
369 <CreatedDate>2006-06-13T01:29:09.030000-04:00</CreatedDate>
370 <LastModifiedDate>2006-07-29T23:45:17.670000-04:00</LastModifiedDate>
371 <RecordStatus>Active</RecordStatus>
372 <RecordStatusDate>2006-06-13T01:29:09.030000-04:00</RecordStatusDate>
373 <Type>Office</Type>
374 <TypeOtherSpecify/>
375 <InternalOffice></InternalOffice>
376 <MailStopCode/>
377 <PreferredFlag>Yes</PreferredFlag>
378 <ActiveFromDate>2006-06-13T01:29:09.000000-04:00</ActiveFromDate>
379 <QCDoneStatus>Yes</QCDoneStatus>
380 <QCDoneStatusDate>2006-06-13T01:29:09.030000-04:00</QCDoneStatusDate>
381 </Address>
382 </Addresses>
383 <ContactMechanisms>
384 <ContactMechanism>
385 <ContactType>Phone</ContactType>
386 <ContactTypeOtherSpecify xsi:nil="true"/>
387 <ContactValue>555-5555</ContactValue>
388 <ContactAreaCode>555</ContactAreaCode>
389 <ContactCountryCallingCode>1</ContactCountryCallingCode>
390 <ContactTollFreeFlag xsi:nil="true"/>
391 <ContactGUID>123</ContactGUID>
392 <ContactCreatedDate>2006-06-13T01:29:09.047000-04:00</ContactCreatedDate>
393 <ContactLastModifiedDate>2007-02-23T16:36:10.260000-05:00</ContactLastModifiedDate>
394 <ContactRecordStatus>Active</ContactRecordStatus>
395 <ContactRecordStatusDate>2006-06-13T01:29:09.047000-04:00</ContactRecordStatusDate>
396 <Role>Business</Role>
397 <PhoneExtension/>
398 <QCDoneStatus>Yes</QCDoneStatus>
399 <QCDoneStatusDate>2006-06-13T01:29:09.047000-04:00</QCDoneStatusDate>
400 <ActiveFromDate>2006-06-13T01:29:09.000000-04:00</ActiveFromDate>
401 <GUID>321</GUID>
402 <CreatedDate>2006-06-13T01:29:09.047000-04:00</CreatedDate>
403 <ModifiedDate>2006-07-29T23:53:03.323000-04:00</ModifiedDate>
404 <PreferredFlag>Yes</PreferredFlag>
405 <RecordStatus>Inactive</RecordStatus>
406 <RecordStatusDate>2006-07-29T23:53:03.393000-04:00</RecordStatusDate>
407 </ContactMechanism>
408 <ContactMechanism>
409 <ContactType>Email</ContactType>
410 <ContactTypeOtherSpecify xsi:nil="true"/>
411 <ContactValue>[email protected]</ContactValue>
412 <ContactAreaCode xsi:nil="true"/>
413 <ContactCountryCallingCode>0</ContactCountryCallingCode>
414 <ContactTollFreeFlag xsi:nil="true"/>
415 <ContactGUID>ddd</ContactGUID>
416 <ContactCreatedDate>2006-06-13T01:29:09.047000-04:00</ContactCreatedDate>
417 <ContactLastModifiedDate>2006-06-13T01:29:09.047000-04:00</ContactLastModifiedDate>
418 <ContactRecordStatus>Active</ContactRecordStatus>
419 <ContactRecordStatusDate>2006-06-13T01:29:09.047000-04:00</ContactRecordStatusDate>
420 <Role>Business</Role>
421 <PhoneExtension xsi:nil="true"/>
422 <QCDoneStatus>Yes</QCDoneStatus>
423 <QCDoneStatusDate>2006-06-13T01:29:09.063000-04:00</QCDoneStatusDate>
424 <ActiveFromDate>2006-06-13T01:29:09.063000-04:00</ActiveFromDate>
425 <GUID>111</GUID>
426 <CreatedDate>2006-06-13T01:29:09.063000-04:00</CreatedDate>
427 <ModifiedDate>2006-06-13T01:29:09.063000-04:00</ModifiedDate>
428 <PreferredFlag>Yes</PreferredFlag>
429 <RecordStatus>Active</RecordStatus>
430 <RecordStatusDate>2006-06-13T01:29:09.063000-04:00</RecordStatusDate>
431 </ContactMechanism>
432 </ContactMechanisms>
433 <Persons>
434 <Person>
435 <PersonID>100448</PersonID>
436 <Prefix/>
437 <FirstName>John</FirstName>
438 <MiddleName/>
439 <LastName>Doe</LastName>
440 <Suffix/>
441 <PreferredName/>
442 <Gender/>
443 <PrimaryLanguage xsi:nil="true"/>
444 <GUID>123</GUID>
445 <RecordStatus>Active</RecordStatus>
446 <RecordStatusDate>2007-04-29T00:11:50.750000-04:00</RecordStatusDate>
447 <CreatedDate>2006-06-13T00:57:21.090000-04:00</CreatedDate>
448 <LastModifiedDate>2007-04-29T00:11:50.770000-04:00</LastModifiedDate>
449 <QCDoneStatus>Yes</QCDoneStatus>
450 <QCDoneStatusDate>2006-06-13T00:57:22.977000-04:00</QCDoneStatusDate>
451 <PersonTypes>
452 <PersonType>
453 <Type>Resource Personnel</Type>
454 <GUID>3049ddcd-3590-4fd9-a534-e2cea5b82c09</GUID>
455 <RecordStatus>Active</RecordStatus>
456 <RecordStatusDate>2006-06-13T00:57:22.977000-04:00</RecordStatusDate>
457 <CreatedDate>2006-06-13T00:57:21.090000-04:00</CreatedDate>
458 <LastModifiedDate>2007-04-29T00:11:50.817000-04:00</LastModifiedDate>
459 <QCDoneStatus>Yes</QCDoneStatus>
460 <QCDoneStatusDate>2006-06-13T00:57:22.977000-04:00</QCDoneStatusDate>
461 </PersonType>
462 </PersonTypes>
463 </Person>
464 </Persons>
465 </Association>
466 </Associations>
467 </OrganizationType>
468 </OrganizationTypes>
469 <ImportedDate>2007-04-30</ImportedDate>
470 </OrganizationPersonAssoc>
471 ';
472 end;
473 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.00
SQL> begin
2 dbms_xmlschema.registerSchema
3 (
4 schemaURL => :schemaURL
5 ,schemaDoc => :xmlSchema
6 ,local => TRUE
7 ,genBean => false
8 ,genTypes => TRUE
9 ,genTables => TRUE
10 ,enableHierarchy => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
11 );
12 end;
13 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:03.67
SQL> insert into Person values ( xmltype (:xmltext1))
2 /
1 row created.
Elapsed: 00:00:00.07
SQL> insert into org_person_assoc values ( xmltype (:xmltext2))
2 /
1 row created.
Elapsed: 00:00:00.03
SQL> commit
2 /
Commit complete.
Elapsed: 00:00:00.00
SQL> CREATE OR REPLACE VIEW XML_PERSON_ASSOCIATION
2 (PERSON)
3 AS
4 select
5 xmlelement("Person",
6 xmlforest(
7 extractvalue(value(p),'/Person/PersonID') "PersonID",
8 extractvalue(value(p),'/Person/Prefix') "Prefix",
9 extractvalue(value(p),'/Person/FirstName') "FirstName",
10 extractvalue(value(p),'/Person/MiddleName') "MiddleName",
11 extractvalue(value(p),'/Person/LastName') "LastName",
12 extractvalue(value(p),'/Person/Suffix') "Suffix",
13 extractvalue(value(p),'/Person/PreferredName') "PreferredName",
14 extractvalue(value(p),'/Person/Gender') "Gender",
15 extractvalue(value(p),'/Person/PrimaryLanguage') "PrimaryLanguage",
16 extractvalue(value(p),'/Person/RecordStatus') "RecordStatus",
17 extractvalue(value(p),'/Person/ImportedDate') "ImportedDate",
18 (select
19 xmlagg(
20 xmlelement("Association",
21 xmlforest(
22 extractvalue(value(oa),'/OrganizationPersonAssoc/Name') "Name",
23 extractvalue(value(ot),'/OrganizationType/OrganizationID') "OrganizationID",
24 extractvalue(value(ot),'/OrganizationType/Type') "OrganizationType",
25 extractvalue(value(a),'/Association/Role') "Role",
26 extractvalue(value(a),'/Association/RecordStatus') "RecordStatus",
27 extractvalue(value(oa),'/OrganizationPersonAssoc/ImportedDate') "ImportedDate"
28 ),
29 xmlelement("PersonTypes",
30 extract(value(per),'/Person/PersonTypes/PersonType')
31 ),
32 xmlelement("Addresses",
33 extract(value(a),'/Association/Addresses/Address')
34 ),
35 xmlelement("ContactMechanisms",
36 extract(value(a),'/Association/ContactMechanisms/ContactMechanism')
37 )
38 )
39 )
40 from org_person_assoc oa,
41 table(xmlsequence(extract(value(oa),'/OrganizationPersonAssoc/OrganizationTypes/OrganizationType'))) ot,
42 table(xmlsequence(extract(value(ot),'/OrganizationType/Associations/Association'))) a,
43 table(xmlsequence(extract(value(a),'/Association/Persons/Person'))) per
44 where extractvalue(value(per),'/Person/PersonID') = extractvalue(value(p),'/Person/PersonID')
45 ) "Associations"
46 )
47 ) person
48 from person p
49 /
View created.
Elapsed: 00:00:00.06
SQL> set autotrace on explain
SQL> --
SQL> set long 10000 pages 0 lines 150
SQL> --
SQL> select person
2 from xml_person_association o
3 where existsnode(person,'/Person/Associations/Association[OrganizationID=30097]')=1
4 /
<Person><PersonID>100448</PersonID><FirstName>John</FirstName><LastName>Doe</LastName><RecordStatus>Active</RecordStatus><ImportedDate>2007-04-30</Imp
ortedDate><Associations><Association><Name>Org Name Office</Name><OrganizationID>30097</OrganizationID><OrganizationType>Agency</OrganizationType><Rol
e>Employee</Role><RecordStatus>Active</RecordStatus><ImportedDate>2007-04-30</ImportedDate><PersonTypes><PersonType>
<Type>Resource Personnel</Type>
<GUID>3049ddcd-3590-4fd9-a534-e2cea5b82c09</GUID>
<RecordStatus>Active</RecordStatus>
<RecordStatusDate>2006-06-13T00:57:22.977000-04:00</RecordStatusDate>
<CreatedDate>2006-06-13T00:57:21.090000-04:00</CreatedDate>
<LastModifiedDate>2007-04-29T00:11:50.817000-04:00</LastModifiedDate>
<QCDoneStatus>Yes</QCDoneStatus>
<QCDoneStatusDate>2006-06-13T00:57:22.977000-04:00</QCDoneStatusDate>
</PersonType>
</PersonTypes><Addresses><Address>
<StreetName1>123 Front St.</StreetName1>
<StreetName2 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<StreetName3 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<StreetName4 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<CityName>City</CityName>
<CityGUID>234234</CityGUID>
<CityCreatedDate>2006-05-08T20:06:45.143000-04:00</CityCreatedDate>
<CityLastModifiedDate>2006-05-08T20:06:45.143000-04:00</CityLastModifiedDate>
<CityRecordStatus>Active</CityRecordStatus>
<CityRecordStatusDate>2006-05-08T20:06:45.143000-04:00</CityRecordStatusDate>
<StateName>New York</StateName>
<StateGUID>9fd469e1-4d4a-4f38-9def-50038e5ecca2</StateGUID>
<StateCreatedDate>2006-04-22T16:09:35.830000-04:00</StateCreatedDate>
<StateLastModifiedDate>2006-04-22T16:09:35.830000-04:00</StateLastModifiedDate>
<StateRecordStatus>Active</StateRecordStatus>
<StateRecordStatusDate>2006-04-22T16:09:35.830000-04:00</StateRecordStatusDate>
<CountryName>United States</CountryName>
<CountryCode>USA</CountryCode>
<CountryGUID>532d35dd-3a49-408a-a416-20c41e9c7997</CountryGUID>
<CountryCreatedDate>2006-04-22T15:30:47.000000-04:00</CountryCreatedDate>
<CountryLastModifiedDate>2006-04-22T15:30:47.000000-04:00</CountryLastModifiedDate>
<CountryRecordStatus>Active</CountryRecordStatus>
<CountryRecordStatusDate>2006-04-22T15:30:47.000000-04:00</CountryRecordStatusDate>
<ZipPostalCode>12345</ZipPostalCode>
<GUID>b2414fa9-7375-4d26-8d76-89a6915d6751</GUID>
<CreatedDate>2006-06-13T01:29:09.030000-04:00</CreatedDate>
<LastModifiedDate>2006-07-29T23:45:17.670000-04:00</LastModifiedDate>
<RecordStatus>Active</RecordStatus>
<RecordStatusDate>2006-06-13T01:29:09.030000-04:00</RecordStatusDate>
<Type>Office</Type>
<TypeOtherSpecify/>
<InternalOffice/>
<MailStopCode/>
<PreferredFlag>Yes</PreferredFlag>
<ActiveFromDate>2006-06-13T01:29:09.000000-04:00</ActiveFromDate>
<QCDoneStatus>Yes</QCDoneStatus>
<QCDoneStatusDate>2006-06-13T01:29:09.030000-04:00</QCDoneStatusDate>
</Address>
</Addresses><ContactMechanisms><ContactMechanism>
<ContactType>Phone</ContactType>
<ContactTypeOtherSpecify xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<ContactValue>555-5555</ContactValue>
<ContactAreaCode>555</ContactAreaCode>
<ContactCountryCallingCode>1</ContactCountryCallingCode>
<ContactTollFreeFlag xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<ContactGUID>123</ContactGUID>
<ContactCreatedDate>2006-06-13T01:29:09.047000-04:00</ContactCreatedDate>
<ContactLastModifiedDate>2007-02-23T16:36:10.260000-05:00</ContactLastModifiedDate>
<ContactRecordStatus>Active</ContactRecordStatus>
<ContactRecordStatusDate>2006-06-13T01:29:09.047000-04:00</ContactRecordStatusDate>
<Role>Business</Role>
<PhoneExtension/>
<QCDoneStatus>Yes</QCDoneStatus>
<QCDoneStatusDate>2006-06-13T01:29:09.047000-04:00</QCDoneStatusDate>
<ActiveFromDate>2006-06-13T01:29:09.000000-04:00</ActiveFromDate>
<GUID>321</GUID>
<CreatedDate>2006-06-13T01:29:09.047000-04:00</CreatedDate>
<ModifiedDate>2006-07-29T23:53:03.323000-04:00</ModifiedDate>
<PreferredFlag>Yes</PreferredFlag>
<RecordStatus>Inactive</RecordStatus>
<RecordStatusDate>2006-07-29T23:53:03.393000-04:00</RecordStatusDate>
</ContactMechanism>
<ContactMechanism>
<ContactType>Email</ContactType>
<ContactTypeOtherSpecify xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<ContactValue>[email protected]</ContactValue>
<ContactAreaCode xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<ContactCountryCallingCode>0</ContactCountryCallingCode>
<ContactTollFreeFlag xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<ContactGUID>ddd</ContactGUID>
<ContactCreatedDate>2006-06-13T01:29:09.047000-04:00</ContactCreatedDate>
<ContactLastModifiedDate>2006-06-13T01:29:09.047000-04:00</ContactLastModifiedDate>
<ContactRecordStatus>Active</ContactRecordStatus>
<ContactRecordStatusDate>2006-06-13T01:29:09.047000-04:00</ContactRecordStatusDate>
<Role>Business</Role>
<PhoneExtension xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<QCDoneStatus>Yes</QCDoneStatus>
<QCDoneStatusDate>2006-06-13T01:29:09.063000-04:00</QCDoneStatusDate>
<ActiveFromDate>2006-06-13T01:29:09.063000-04:00</ActiveFromDate>
<GUID>111</GUID>
<CreatedDate>2006-06-13T01:29:09.063000-04:00</CreatedDate>
<ModifiedDate>2006-06-13T01:29:09.063000-04:00</ModifiedDate>
<PreferredFlag>Yes</PreferredFlag>
<RecordStatus>Active</RecordStatus>
<RecordStatusDate>2006-06-13T01:29:09.063000-04:00</RecordStatusDate>
</ContactMechanism>
</ContactMechanisms></Association></Associations></Person>
Elapsed: 00:00:00.42
Execution Plan
Plan hash value: 95656148
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 18040 | 9 (0)| 00:00:01 |
| 1 | SORT AGGREGATE | | 1 | 10096 | | |
| 2 | TABLE ACCESS BY INDEX ROWID | SYS_NT32zHSpCZQ9ynComtqqKsrw== | 1 | 10096 | 2 (0)| 00:00:01 |
|* 3 | INDEX RANGE SCAN | SYS_C009300 | 1 | | 2 (0)| 00:00:01 |
| 4 | SORT AGGREGATE | | 1 | 48284 | | |
| 5 | TABLE ACCESS BY INDEX ROWID | SYS_NTjbkXqKq3S96fbEOM3Qs5Gg== | 1 | 48284 | 2 (0)| 00:00:01 |
|* 6 | INDEX RANGE SCAN | SYS_C009296 | 1 | | 2 (0)| 00:00:01 |
| 7 | SORT AGGREGATE | | 1 | 28187 | | |
| 8 | TABLE ACCESS BY INDEX ROWID| SYS_NTm2nBfKKNSGm6hs2e1Z0w/A== | 1 | 28187 | 2 (0)| 00:00:01 |
|* 9 | INDEX RANGE SCAN | SYS_C009297 | 1 | | 2 (0)| 00:00:01 |
| 10 | SORT AGGREGATE | | 1 | 13910 | | |
| 11 | NESTED LOOPS | | 1 | 13910 | 6 (0)| 00:00:01 |
| 12 | NESTED LOOPS | | 1 | 8131 | 5 (0)| 00:00:01 |
| 13 | NESTED LOOPS | | 1 | 4097 | 4 (0)| 00:00:01 |
|* 14 | TABLE ACCESS FULL | SYS_NT7Erd/G5iSPWX9w20Z5cNRg== | 1 | 43 | 3 (0)| 00:00:01 |
|* 15 | TABLE ACCESS BY INDEX ROWID | SYS_NTQWY/m3uES5GM7AByRclr8A== | 1 | 4054 | 1 (0)| 00:00:01 |
|* 16 | INDEX UNIQUE SCAN | SYS_C009310 | 1 | | 0 (0)| 00:00:01 |
|* 17 | TABLE ACCESS BY INDEX ROWID | SYS_NTTiDHMvB7RbSEfNxho66yQg== | 1 | 4034 | 1 (0)| 00:00:01 |
|* 18 | INDEX UNIQUE SCAN | SYS_C009314 | 1 | | 0 (0)| 00:00:01 |
| 19 | TABLE ACCESS BY INDEX ROWID | ORG_PERSON_ASSOC | 1 | 5779 | 1 (0)| 00:00:01 |
|* 20 | INDEX UNIQUE SCAN | SYS_C009320 | 1 | | 0 (0)| 00:00:01 |
|* 21 | FILTER | | | | | |
| 22 | TABLE ACCESS FULL | PERSON | 1 | 18040 | 3 (0)| 00:00:01 |
| 23 | NESTED LOOPS | | | | | |
| 24 | NESTED LOOPS | | 1 | 5893 | 6 (0)| 00:00:01 |
| 25 | NESTED LOOPS | | 1 | 2125 | 5 (0)| 00:00:01 |
| 26 | NESTED LOOPS | | 1 | 93 | 4 (0)| 00:00:01 |
|* 27 | TABLE ACCESS FULL | SYS_NT7Erd/G5iSPWX9w20Z5cNRg== | 1 | 43 | 3 (0)| 00:00:01 |
|* 28 | TABLE ACCESS BY INDEX ROWID| SYS_NTQWY/m3uES5GM7AByRclr8A== | 1 | 50 | 1 (0)| 00:00:01 |
|* 29 | INDEX UNIQUE SCAN | SYS_C009310 | 1 | | 0 (0)| 00:00:01 |
|* 30 | TABLE ACCESS BY INDEX ROWID | SYS_NTTiDHMvB7RbSEfNxho66yQg== | 1 | 2032 | 1 (0)| 00:00:01 |
|* 31 | INDEX UNIQUE SCAN | SYS_C009314 | 1 | | 0 (0)| 00:00:01 |
|* 32 | INDEX UNIQUE SCAN | SYS_C009320 | 1 | | 0 (0)| 00:00:01 |
| 33 | TABLE ACCESS BY INDEX ROWID | ORG_PERSON_ASSOC | 1 | 3768 | 1 (0)| 00:00:01 |
Predicate Information (identified by operation id):
3 - access("NESTED_TABLE_ID"=:B1)
6 - access("NESTED_TABLE_ID"=:B1)
9 - access("NESTED_TABLE_ID"=:B1)
14 - filter("SYS_NC_TYPEID$" IS NOT NULL AND "PersonID"=:B1)
15 - filter("SYS_NC_TYPEID$" IS NOT NULL)
16 - access("NESTED_TABLE_ID"="SYS_ALIAS_1"."SYS_NC0002700028$")
17 - filter("SYS_NC_TYPEID$" IS NOT NULL)
18 - access("NESTED_TABLE_ID"="SYS_ALIAS_0"."SYS_NC0003700038$")
20 - access("NESTED_TABLE_ID"="OA"."SYS_NC0002100022$")
21 - filter( EXISTS (SELECT 0 FROM "XDBTEST"."SYS_NT7Erd/G5iSPWX9w20Z5cNRg=="
"SYS_ALIAS_1","XDBTEST"."SYS_NTQWY/m3uES5GM7AByRclr8A=="
"SYS_ALIAS_3","XDBTEST"."SYS_NTTiDHMvB7RbSEfNxho66yQg==" "SYS_ALIAS_0","XDBTEST"."ORG_PERSON_ASSOC" "OA"
WHERE "SYS_ALIAS_0"."NESTED_TABLE_ID"="OA"."SYS_NC0002100022$" AND
"SYS_ALIAS_1"."NESTED_TABLE_ID"="SYS_ALIAS_0"."SYS_NC0003700038$" AND "SYS_ALIAS_0"."SYS_NC_TYPEID$" IS
NOT NULL AND TO_NUMBER("SYS_ALIAS_0"."OrganizationID")=30097 AND
"SYS_ALIAS_4"."NESTED_TABLE_ID"="SYS_ALIAS_1"."SYS_NC0002700028$" AND "SYS_ALIAS_1"."SYS_NC_TYPEID$" IS
NOT NULL AND "SYS_ALIAS_4"."SYS_NC_TYPEID$" IS NOT NULL AND "SYS_ALIAS_4"."PersonID"=:B1))
27 - filter("SYS_ALIAS_4"."SYS_NC_TYPEID$" IS NOT NULL AND "SYS_ALIAS_4"."PersonID"=:B1)
28 - filter("SYS_ALIAS_1"."SYS_NC_TYPEID$" IS NOT NULL)
29 - access("SYS_ALIAS_4"."NESTED_TABLE_ID"="SYS_ALIAS_1"."SYS_NC0002700028$")
30 - filter("SYS_ALIAS_0"."SYS_NC_TYPEID$" IS NOT NULL AND
TO_NUMBER("SYS_ALIAS_0"."OrganizationID")=30097)
31 - access("SYS_ALIAS_1"."NESTED_TABLE_ID"="SYS_ALIAS_0"."SYS_NC0003700038$")
32 - access("SYS_ALIAS_0"."NESTED_TABLE_ID"="OA"."SYS_NC0002100022$")
Note
- dynamic sampling used for this statement
SQL> select extract(person,'/Person/Associations/Association')
2 from xml_person_association o
3 where existsnode(person,'/Person/Associations/Association[OrganizationID=30097]')=1
4 /
<Association><Name>Org Name Office</Name><OrganizationID>30097</OrganizationID><OrganizationType>Agency</OrganizationType><Role>Employee</Role><Record
Status>Active</RecordStatus><ImportedDate>2007-04-30</ImportedDate><PersonTypes><PersonType><Type>Resource Personnel</Type><GUID>3049ddcd-3590-4fd9-a5
34-e2cea5b82c09</GUID><RecordStatus>Active</RecordStatus><RecordStatusDate>2006-06-13T00:57:22.977000-04:00</RecordStatusDate><CreatedDate>2006-06-13T
00:
Maybe you are looking for
-
Oracle Rules: Adding Java Facts - not showing up in list.
I am having trouble with adding my own Java classes to the Java Facts. I find the class in the list of classes, tick it, and hit "Ok". When I come back to the list of Java Facts, the class has not been added to the list. And no error message is displ
-
External Send Billing Document - Issues Generating Body Text in Email
Have generated output type to email billing document as PDF to customer. I am using medium 5 for 'External Send' and have everything working well - the subject line is correctly showing the company name and invoice number, also the PDF is tagged corr
-
Weird data reached in text files
Hi all, I am seeking for some opinions about a problem I encouter in an experiment. I would very much appreciate your thoughts. There are the well-known programs in the Example Finder: 1. Write binary file - which takes inputs from a sinus wave gener
-
Hi I have a windows 8.1 pro computer joined on a domain with all that latest patches. Today I ran the update to windows 10 directly from windows updates (not from a ISO image). Everything ran well for the install and the computer restarted. Howeve
-
Downloading adobe flash player demo on windows with winrar
im downloading the demo and for some reason it finishes the first file but then it just stops on the second one and it just keeps saying waiting waiting can someone help?