Xorg 1.8 + Synaptics --- Erroneous Error Messages?
I upgraded to Xorg 1.8, and it seems to working fine. I do get some errors when I start though:
SynPS/2 Synaptics TouchPad no synaptics even device found
(EE) SynPS/2 Synaptics TouchPad: no supported touchpad found
(EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
But my touchpad works fine. Anyone know why this is? Is there some further configuration that I need to do? I have already customized the settings a bit in /etc/X11/xorg.conf.d/10-synaptics.conf.
Last edited by egan (2010-06-21 16:27:34)
George.Harmony wrote:
I had a similar error. It would find a touchpad at /dev/input/event6 and then again at /dev/input/mouse0.
From what I could figure out. Xorg was applying the synaptic driver to the first instance that was given to it from udev and then when the second instance is givin to it by udev under the mouse0 dev it wasn't there anymore.
My solution was to add this to my /etc/X11/xorg.conf.d/10-evdev.conf
Section "InputClass"
Identifier "disabling synaptic second mouse found"
MatchProduct "SynPS/2 Synaptics TouchPad"
MatchDevicePath "/dev/input/mouse0"
Option "Ignore" "on"
EndSection
now my Xorg.0.log looks like this
[ 15289.397] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 15289.397] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 15289.397] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 15289.398] (II) LoadModule: "synaptics"
[ 15289.398] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 15289.398] (II) Module synaptics: vendor="X.Org Foundation"
[ 15289.398] compiled for 1.8.0.902, module version = 1.2.2
[ 15289.399] Module class: X.Org XInput Driver
[ 15289.399] ABI class: X.Org XInput driver, version 9.0
[ 15289.399] (II) Synaptics touchpad driver version 1.2.2
[ 15289.399] (**) Option "Device" "/dev/input/event6"
[ 15289.411] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 15289.411] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 15289.411] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 15289.411] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 15289.411] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[ 15289.411] (**) Option "SHMConfig" "on"
[ 15289.411] (**) Option "EmulateTwoFingerMinZ" "0"
[ 15289.411] (**) Option "VertEdgeScroll" "on"
[ 15289.411] (**) Option "VertTwoFingerScroll" "on"
[ 15289.411] (**) Option "HorizTwoFingerScroll" "on"
[ 15289.412] (**) Option "LTCornerButton" "3"
[ 15289.412] (**) Option "LBCornerButton" "2"
[ 15289.412] (**) Option "TapButton1" "1"
[ 15289.412] (**) Option "TapButton2" "2"
[ 15289.412] (**) Option "TapButton3" "3"
[ 15289.420] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 15289.420] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 15289.424] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 15289.424] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 15289.424] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 15289.424] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 15289.424] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 15289.432] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 15289.432] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 15289.432] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "disabling synaptic second mouse found"
Hope this helps.
Holy crap! It sure did help. You nailed it.
Jay
Similar Messages
-
[solved] Xorg quits after 'startx' no error message
Hi guys,
So I'm a little perplexed. One day my system just started quitting xorg. I had it to startx upon login, but that would just flash my monitors black and then return my to a login prompt. So I went in and tried to analyse the log file but I didn't have much luck. I'm going to post it here and hopefully you guys can point me in the right direction.
[ 567.631]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 567.632] X Protocol Version 11, Revision 0
[ 567.633] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 567.634] Current Operating System: Linux taylorsarch 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64
[ 567.634] Kernel command line: \boot\vmlinuz-linux ro root=UUID=830d6c13-b8af-4b77-8f6e-058cefb7f0f7 initrd=boot\initramfs-linux.img
[ 567.635] Build Date: 14 March 2015 06:45:50PM
[ 567.636]
[ 567.636] Current version of pixman: 0.32.6
[ 567.638] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 567.638] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 567.641] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 19 17:39:36 2015
[ 567.641] (==) Using config file: "/etc/xorg.conf"
[ 567.642] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 567.643] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 567.643] (==) ServerLayout "Layout0"
[ 567.643] (**) |-->Screen "Screen0" (0)
[ 567.643] (**) | |-->Monitor "Monitor0"
[ 567.643] (**) | |-->Device "Device0"
[ 567.643] (**) |-->Input Device "Keyboard0"
[ 567.643] (**) |-->Input Device "Mouse0"
[ 567.643] (==) Automatically adding devices
[ 567.643] (==) Automatically enabling devices
[ 567.643] (==) Automatically adding GPU devices
[ 567.643] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 567.643] Entry deleted from font path.
[ 567.643] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 567.643] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 567.643] Entry deleted from font path.
[ 567.643] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 567.643] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 567.643] Entry deleted from font path.
[ 567.643] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 567.643] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 567.643] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 567.643] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 567.643] (WW) Disabling Keyboard0
[ 567.643] (WW) Disabling Mouse0
[ 567.643] (II) Loader magic: 0x815d80
[ 567.643] (II) Module ABI versions:
[ 567.643] X.Org ANSI C Emulation: 0.4
[ 567.643] X.Org Video Driver: 19.0
[ 567.643] X.Org XInput driver : 21.0
[ 567.643] X.Org Server Extension : 9.0
[ 567.646] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c16
[ 567.646] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 567.646] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 567.646] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 567.647] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 9 paused 0
[ 567.650] (--) PCI:*(0:1:0:0) 10de:11c0:3842:2660 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 567.650] (--) PCI: (0:2:0:0) 10de:11c0:3842:2662 rev 161, Mem @ 0xf8000000/16777216, 0xc0000000/134217728, 0xc8000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 567.650] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 567.650] (II) LoadModule: "glx"
[ 567.651] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 567.657] (II) Module glx: vendor="NVIDIA Corporation"
[ 567.658] compiled for 4.0.2, module version = 1.0.0
[ 567.658] Module class: X.Org Server Extension
[ 567.658] (II) NVIDIA GLX Module 304.125 Mon Dec 1 20:22:48 PST 2014
[ 567.658] (II) LoadModule: "nvidia"
[ 567.658] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 567.658] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 567.658] compiled for 4.0.2, module version = 1.0.0
[ 567.658] Module class: X.Org Video Driver
[ 567.658] (II) NVIDIA dlloader X Driver 304.125 Mon Dec 1 20:00:30 PST 2014
[ 567.658] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 567.658] (++) using VT number 1
[ 567.658] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 567.658] (II) Loading sub module "fb"
[ 567.658] (II) LoadModule: "fb"
[ 567.658] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 567.658] (II) Module fb: vendor="X.Org Foundation"
[ 567.658] compiled for 1.17.1, module version = 1.0.0
[ 567.658] ABI class: X.Org ANSI C Emulation, version 0.4
[ 567.659] (II) Loading sub module "wfb"
[ 567.659] (II) LoadModule: "wfb"
[ 567.659] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 567.659] (II) Module wfb: vendor="X.Org Foundation"
[ 567.659] compiled for 1.17.1, module version = 1.0.0
[ 567.659] ABI class: X.Org ANSI C Emulation, version 0.4
[ 567.659] (II) Loading sub module "ramdac"
[ 567.659] (II) LoadModule: "ramdac"
[ 567.659] (II) Module "ramdac" already built-in
[ 567.659] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 567.659] (==) NVIDIA(0): RGB weight 888
[ 567.659] (==) NVIDIA(0): Default visual is TrueColor
[ 567.659] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 567.659] (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0 { ForceFullCompositionPipeline = On }"
[ 567.659] (**) NVIDIA(0): Enabling 2D acceleration
[ 568.126] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VH238 (DFP-0)) does not
[ 568.126] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 568.131] (II) NVIDIA(GPU-0): Display (DELL 2005FPW (DFP-3)) does not support NVIDIA 3D
[ 568.131] (II) NVIDIA(GPU-0): Vision stereo.
[ 568.132] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660 (GK106) at PCI:1:0:0 (GPU-0)
[ 568.132] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 568.132] (--) NVIDIA(0): VideoBIOS: 80.06.58.00.60
[ 568.132] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 568.132] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 568.138] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660 at PCI:1:0:0
[ 568.139] (--) NVIDIA(0): CRT-0
[ 568.139] (--) NVIDIA(0): Ancor Communications Inc ASUS VH238 (DFP-0) (connected)
[ 568.139] (--) NVIDIA(0): DFP-1
[ 568.139] (--) NVIDIA(0): DFP-2
[ 568.139] (--) NVIDIA(0): DELL 2005FPW (DFP-3) (connected)
[ 568.139] (--) NVIDIA(0): DFP-4
[ 568.139] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 568.139] (--) NVIDIA(0): Ancor Communications Inc ASUS VH238 (DFP-0): 330.0 MHz maximum pixel clock
[ 568.139] (--) NVIDIA(0): Ancor Communications Inc ASUS VH238 (DFP-0): Internal Dual Link TMDS
[ 568.139] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 568.139] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 568.139] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
[ 568.139] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[ 568.139] (--) NVIDIA(0): DELL 2005FPW (DFP-3): 330.0 MHz maximum pixel clock
[ 568.139] (--) NVIDIA(0): DELL 2005FPW (DFP-3): Internal Dual Link TMDS
[ 568.139] (--) NVIDIA(0): DFP-4: 960.0 MHz maximum pixel clock
[ 568.139] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 568.139] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 568.139] (**) NVIDIA(0): device Ancor Communications Inc ASUS VH238 (DFP-0) (Using
[ 568.139] (**) NVIDIA(0): EDID frequencies has been enabled on all display
[ 568.139] (**) NVIDIA(0): devices.)
[ 568.141] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 568.141] (**) NVIDIA(0): device DELL 2005FPW (DFP-3) (Using EDID frequencies has
[ 568.141] (**) NVIDIA(0): been enabled on all display devices.)
[ 568.142] (II) NVIDIA(0): Validated MetaModes:
[ 568.142] (II) NVIDIA(0): "nvidia-auto-select+0+0{ForceFullCompositionPipeline=On}"
[ 568.142] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 568.170] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[ 568.170] (--) NVIDIA(0): option
[ 568.170] (--) Depth 24 pixmap format is 32 bpp
[ 568.516] (II) NVIDIA(GPU-1): NVIDIA GPU GeForce GTX 660 (GK106) at PCI:2:0:0 (GPU-1)
[ 568.516] (--) NVIDIA(GPU-1): Memory: 2097152 kBytes
[ 568.516] (--) NVIDIA(GPU-1): VideoBIOS: 80.06.58.00.60
[ 568.516] (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X
[ 568.516] (--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU
[ 568.516] (--) NVIDIA(GPU-1): Valid display device(s) on GeForce GTX 660 at PCI:2:0:0
[ 568.516] (--) NVIDIA(GPU-1): CRT-0
[ 568.516] (--) NVIDIA(GPU-1): DFP-0
[ 568.516] (--) NVIDIA(GPU-1): DFP-1
[ 568.516] (--) NVIDIA(GPU-1): DFP-2
[ 568.516] (--) NVIDIA(GPU-1): DFP-3
[ 568.516] (--) NVIDIA(GPU-1): DFP-4
[ 568.516] (--) NVIDIA(GPU-1): CRT-0: 400.0 MHz maximum pixel clock
[ 568.516] (--) NVIDIA(GPU-1): DFP-0: 330.0 MHz maximum pixel clock
[ 568.516] (--) NVIDIA(GPU-1): DFP-0: Internal Single Link TMDS
[ 568.516] (--) NVIDIA(GPU-1): DFP-1: 165.0 MHz maximum pixel clock
[ 568.516] (--) NVIDIA(GPU-1): DFP-1: Internal Single Link TMDS
[ 568.516] (--) NVIDIA(GPU-1): DFP-2: 165.0 MHz maximum pixel clock
[ 568.516] (--) NVIDIA(GPU-1): DFP-2: Internal Single Link TMDS
[ 568.516] (--) NVIDIA(GPU-1): DFP-3: 330.0 MHz maximum pixel clock
[ 568.516] (--) NVIDIA(GPU-1): DFP-3: Internal Single Link TMDS
[ 568.516] (--) NVIDIA(GPU-1): DFP-4: 400.0 MHz maximum pixel clock
[ 568.516] (--) NVIDIA(GPU-1): DFP-4: Internal DisplayPort
[ 568.516] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 568.516] (II) NVIDIA: access.
[ 568.521] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 568.521] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 568.521] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 568.521] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 568.521] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 568.521] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 568.521] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 568.521] (II) NVIDIA(0): Config Options in the README.
[ 568.527] (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0{ForceFullCompositionPipeline=On}"
[ 568.588] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 568.588] (==) NVIDIA(0): Backing store enabled
[ 568.588] (==) NVIDIA(0): Silken mouse enabled
[ 568.588] (**) NVIDIA(0): DPMS enabled
[ 568.588] (II) Loading sub module "dri2"
[ 568.588] (II) LoadModule: "dri2"
[ 568.588] (II) Module "dri2" already built-in
[ 568.588] (II) NVIDIA(0): [DRI2] Setup complete
[ 568.588] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 568.588] (--) RandR disabled
[ 568.592] (II) Initializing extension GLX
[ 568.592] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 568.618] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 568.618] (**) Power Button: Applying InputClass "system-keyboard"
[ 568.618] (II) LoadModule: "evdev"
[ 568.619] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 568.619] (II) Module evdev: vendor="X.Org Foundation"
[ 568.619] compiled for 1.16.2, module version = 2.9.1
[ 568.619] Module class: X.Org XInput Driver
[ 568.619] ABI class: X.Org XInput driver, version 21.0
[ 568.619] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 36 paused 0
[ 568.619] (II) Using input driver 'evdev' for 'Power Button'
[ 568.619] (**) Power Button: always reports core events
[ 568.619] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 568.619] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 568.619] (--) evdev: Power Button: Found keys
[ 568.619] (II) evdev: Power Button: Configuring as keyboard
[ 568.619] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[ 568.619] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 568.619] (**) Option "xkb_rules" "evdev"
[ 568.619] (**) Option "xkb_model" "pc104"
[ 568.619] (**) Option "xkb_layout" "dvorak"
[ 568.647] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 568.647] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 568.647] (**) Power Button: Applying InputClass "system-keyboard"
[ 568.648] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 37 paused 0
[ 568.648] (II) Using input driver 'evdev' for 'Power Button'
[ 568.648] (**) Power Button: always reports core events
[ 568.648] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 568.648] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 568.648] (--) evdev: Power Button: Found keys
[ 568.648] (II) evdev: Power Button: Configuring as keyboard
[ 568.648] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event4"
[ 568.648] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 568.648] (**) Option "xkb_rules" "evdev"
[ 568.648] (**) Option "xkb_model" "pc104"
[ 568.648] (**) Option "xkb_layout" "dvorak"
[ 568.648] (II) config/udev: Adding input device USB full speed gaming keyboard (/dev/input/event2)
[ 568.648] (**) USB full speed gaming keyboard: Applying InputClass "evdev keyboard catchall"
[ 568.648] (**) USB full speed gaming keyboard: Applying InputClass "system-keyboard"
[ 568.648] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 38 paused 0
[ 568.648] (II) Using input driver 'evdev' for 'USB full speed gaming keyboard'
[ 568.648] (**) USB full speed gaming keyboard: always reports core events
[ 568.648] (**) evdev: USB full speed gaming keyboard: Device: "/dev/input/event2"
[ 568.648] (--) evdev: USB full speed gaming keyboard: Vendor 0x60b Product 0x6251
[ 568.648] (--) evdev: USB full speed gaming keyboard: Found keys
[ 568.648] (II) evdev: USB full speed gaming keyboard: Configuring as keyboard
[ 568.648] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7.4/4-1.7.4:1.0/0003:060B:6251.0003/input/input4/event2"
[ 568.648] (II) XINPUT: Adding extended input device "USB full speed gaming keyboard" (type: KEYBOARD, id 8)
[ 568.648] (**) Option "xkb_rules" "evdev"
[ 568.648] (**) Option "xkb_model" "pc104"
[ 568.648] (**) Option "xkb_layout" "dvorak"
[ 568.649] (II) config/udev: Adding input device USB full speed gaming keyboard (/dev/input/event3)
[ 568.649] (**) USB full speed gaming keyboard: Applying InputClass "evdev keyboard catchall"
[ 568.649] (**) USB full speed gaming keyboard: Applying InputClass "system-keyboard"
[ 568.649] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 39 paused 0
[ 568.649] (II) Using input driver 'evdev' for 'USB full speed gaming keyboard'
[ 568.649] (**) USB full speed gaming keyboard: always reports core events
[ 568.649] (**) evdev: USB full speed gaming keyboard: Device: "/dev/input/event3"
[ 568.649] (--) evdev: USB full speed gaming keyboard: Vendor 0x60b Product 0x6251
[ 568.649] (--) evdev: USB full speed gaming keyboard: Found 1 mouse buttons
[ 568.649] (--) evdev: USB full speed gaming keyboard: Found scroll wheel(s)
[ 568.649] (--) evdev: USB full speed gaming keyboard: Found relative axes
[ 568.649] (II) evdev: USB full speed gaming keyboard: Forcing relative x/y axes to exist.
[ 568.649] (--) evdev: USB full speed gaming keyboard: Found absolute axes
[ 568.649] (II) evdev: USB full speed gaming keyboard: Forcing absolute x/y axes to exist.
[ 568.649] (--) evdev: USB full speed gaming keyboard: Found keys
[ 568.649] (II) evdev: USB full speed gaming keyboard: Configuring as mouse
[ 568.649] (II) evdev: USB full speed gaming keyboard: Configuring as keyboard
[ 568.649] (II) evdev: USB full speed gaming keyboard: Adding scrollwheel support
[ 568.649] (**) evdev: USB full speed gaming keyboard: YAxisMapping: buttons 4 and 5
[ 568.649] (**) evdev: USB full speed gaming keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 568.649] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7.4/4-1.7.4:1.1/0003:060B:6251.0004/input/input5/event3"
[ 568.649] (II) XINPUT: Adding extended input device "USB full speed gaming keyboard" (type: KEYBOARD, id 9)
[ 568.649] (**) Option "xkb_rules" "evdev"
[ 568.649] (**) Option "xkb_model" "pc104"
[ 568.649] (**) Option "xkb_layout" "dvorak"
[ 568.649] (II) evdev: USB full speed gaming keyboard: initialized for relative axes.
[ 568.649] (WW) evdev: USB full speed gaming keyboard: ignoring absolute axes.
[ 568.649] (**) USB full speed gaming keyboard: (accel) keeping acceleration scheme 1
[ 568.649] (**) USB full speed gaming keyboard: (accel) acceleration profile 0
[ 568.650] (**) USB full speed gaming keyboard: (accel) acceleration factor: 2.000
[ 568.650] (**) USB full speed gaming keyboard: (accel) acceleration threshold: 4
[ 568.650] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[ 568.650] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 568.703] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 40 paused 0
[ 568.703] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 568.703] (**) Logitech USB Receiver: always reports core events
[ 568.703] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[ 568.703] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc531
[ 568.703] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 568.703] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 568.703] (--) evdev: Logitech USB Receiver: Found relative axes
[ 568.703] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 568.703] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 568.703] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 568.703] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 568.703] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 568.703] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8:1.0/0003:046D:C531.0001/input/input2/event0"
[ 568.703] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 568.703] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 568.703] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 568.703] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 568.703] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 568.703] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 568.704] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 568.704] (II) No input driver specified, ignoring this device.
[ 568.704] (II) This device may have been added with another device file.
[ 568.704] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 568.704] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 568.704] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[ 568.704] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 41 paused 0
[ 568.704] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 568.704] (**) Logitech USB Receiver: always reports core events
[ 568.704] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 568.704] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc531
[ 568.704] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 568.704] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 568.704] (--) evdev: Logitech USB Receiver: Found relative axes
[ 568.704] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 568.704] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 568.704] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 568.704] (--) evdev: Logitech USB Receiver: Found keys
[ 568.704] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 568.704] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 568.704] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 568.704] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 568.704] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 568.705] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8:1.1/0003:046D:C531.0002/input/input3/event1"
[ 568.705] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 568.705] (**) Option "xkb_rules" "evdev"
[ 568.705] (**) Option "xkb_model" "pc104"
[ 568.705] (**) Option "xkb_layout" "dvorak"
[ 568.705] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 568.705] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 568.705] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 568.705] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 568.705] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 568.705] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 568.705] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[ 568.705] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 568.705] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[ 568.705] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 42 paused 0
[ 568.706] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 568.706] (**) Eee PC WMI hotkeys: always reports core events
[ 568.706] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event7"
[ 568.706] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 568.706] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 568.706] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 568.706] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input10/event7"
[ 568.706] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[ 568.706] (**) Option "xkb_rules" "evdev"
[ 568.706] (**) Option "xkb_model" "pc104"
[ 568.706] (**) Option "xkb_layout" "dvorak"
[ 568.706] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 568.706] (II) No input driver specified, ignoring this device.
[ 568.706] (II) This device may have been added with another device file.
[ 568.748] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VH238 (DFP-0)) does not
[ 568.748] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 568.748] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 568.748] (**) NVIDIA(0): device Ancor Communications Inc ASUS VH238 (DFP-0) (Using
[ 568.748] (**) NVIDIA(0): EDID frequencies has been enabled on all display
[ 568.748] (**) NVIDIA(0): devices.)
[ 568.756] (II) NVIDIA(GPU-0): Display (DELL 2005FPW (DFP-3)) does not support NVIDIA 3D
[ 568.756] (II) NVIDIA(GPU-0): Vision stereo.
[ 568.756] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 568.756] (**) NVIDIA(0): device DELL 2005FPW (DFP-3) (Using EDID frequencies has
[ 568.756] (**) NVIDIA(0): been enabled on all display devices.)
[ 568.830] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1080 +0+600"
[ 568.899] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1080 +0+600, DVI-D-0: nvidia-auto-select @1050x1680 +1920+0 {Rotation=90}"
[ 569.028] (II) evdev: Eee PC WMI hotkeys: Close
[ 569.028] (II) UnloadModule: "evdev"
[ 569.028] (II) systemd-logind: releasing fd for 13:71
[ 569.103] (II) evdev: Logitech USB Receiver: Close
[ 569.103] (II) UnloadModule: "evdev"
[ 569.103] (II) systemd-logind: releasing fd for 13:65
[ 569.156] (II) evdev: Logitech USB Receiver: Close
[ 569.156] (II) UnloadModule: "evdev"
[ 569.156] (II) systemd-logind: releasing fd for 13:64
[ 569.210] (II) evdev: USB full speed gaming keyboard: Close
[ 569.210] (II) UnloadModule: "evdev"
[ 569.210] (II) systemd-logind: releasing fd for 13:67
[ 569.263] (II) evdev: USB full speed gaming keyboard: Close
[ 569.263] (II) UnloadModule: "evdev"
[ 569.263] (II) systemd-logind: releasing fd for 13:66
[ 569.316] (II) evdev: Power Button: Close
[ 569.316] (II) UnloadModule: "evdev"
[ 569.316] (II) systemd-logind: releasing fd for 13:68
[ 569.343] (II) evdev: Power Button: Close
[ 569.343] (II) UnloadModule: "evdev"
[ 569.343] (II) systemd-logind: releasing fd for 13:69
[ 569.688] (II) Server terminated successfully (0). Closing log file.
I have my system fully up to date, I really have no idea why one day it would just stop working.
I saw that at line 568.521 there was a failure of ACPI but I really am not sure how that would affect my system.
Only thing I can think of in conjunction with this issue, is that I setup my foldingathome client to be enabled in systemctl. It started making weird graph glitches in my tty so I disabled it. Not sure if they are linked or not.
Thanks!
Last edited by 15goudreau (2015-03-29 15:17:53)I uninstalled nvidia-304xx and installed nvidia with needed dependencies. This is the output I get from running 'startx'. It does the exact same thing, looks like it's going to load screen flickers and then kicks me back saying it was terminated successfully.
[ 15.795]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 15.796] X Protocol Version 11, Revision 0
[ 15.796] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 15.796] Current Operating System: Linux taylorsarch 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64
[ 15.796] Kernel command line: \boot\vmlinuz-linux ro root=UUID=830d6c13-b8af-4b77-8f6e-058cefb7f0f7 initrd=boot\initramfs-linux.img
[ 15.796] Build Date: 14 March 2015 06:45:50PM
[ 15.796]
[ 15.796] Current version of pixman: 0.32.6
[ 15.796] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.796] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.796] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 22 11:59:26 2015
[ 15.799] (==) Using config file: "/etc/xorg.conf"
[ 15.799] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15.799] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 15.801] (==) ServerLayout "Layout0"
[ 15.801] (**) |-->Screen "Screen0" (0)
[ 15.801] (**) | |-->Monitor "Monitor0"
[ 15.801] (**) | |-->Device "Device0"
[ 15.801] (**) |-->Input Device "Keyboard0"
[ 15.801] (**) |-->Input Device "Mouse0"
[ 15.801] (==) Automatically adding devices
[ 15.801] (==) Automatically enabling devices
[ 15.801] (==) Automatically adding GPU devices
[ 15.803] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 15.803] Entry deleted from font path.
[ 15.803] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 15.805] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 15.805] Entry deleted from font path.
[ 15.805] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 15.805] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 15.805] Entry deleted from font path.
[ 15.805] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 15.805] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 15.805] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.805] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 15.805] (WW) Disabling Keyboard0
[ 15.805] (WW) Disabling Mouse0
[ 15.805] (II) Loader magic: 0x815d80
[ 15.805] (II) Module ABI versions:
[ 15.805] X.Org ANSI C Emulation: 0.4
[ 15.805] X.Org Video Driver: 19.0
[ 15.805] X.Org XInput driver : 21.0
[ 15.805] X.Org Server Extension : 9.0
[ 15.808] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 15.808] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 15.808] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 15.809] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 15.809] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 9 paused 0
[ 15.813] (--) PCI:*(0:1:0:0) 10de:11c0:3842:2660 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 15.813] (--) PCI: (0:2:0:0) 10de:11c0:3842:2662 rev 161, Mem @ 0xf8000000/16777216, 0xc0000000/134217728, 0xc8000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 15.813] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15.813] (II) LoadModule: "glx"
[ 15.818] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.905] (II) Module glx: vendor="NVIDIA Corporation"
[ 15.905] compiled for 4.0.2, module version = 1.0.0
[ 15.905] Module class: X.Org Server Extension
[ 15.906] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 15.906] (II) LoadModule: "nvidia"
[ 15.906] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 15.912] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 15.912] compiled for 4.0.2, module version = 1.0.0
[ 15.912] Module class: X.Org Video Driver
[ 15.913] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 15.913] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 15.913] (++) using VT number 1
[ 15.913] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 15.914] (II) Loading sub module "fb"
[ 15.914] (II) LoadModule: "fb"
[ 15.914] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 15.915] (II) Module fb: vendor="X.Org Foundation"
[ 15.915] compiled for 1.17.1, module version = 1.0.0
[ 15.915] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.915] (II) Loading sub module "wfb"
[ 15.915] (II) LoadModule: "wfb"
[ 15.915] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 15.916] (II) Module wfb: vendor="X.Org Foundation"
[ 15.916] compiled for 1.17.1, module version = 1.0.0
[ 15.916] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.916] (II) Loading sub module "ramdac"
[ 15.916] (II) LoadModule: "ramdac"
[ 15.916] (II) Module "ramdac" already built-in
[ 15.918] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 15.918] (==) NVIDIA(0): RGB weight 888
[ 15.918] (==) NVIDIA(0): Default visual is TrueColor
[ 15.918] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 15.919] (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0 { ForceFullCompositionPipeline = On }"
[ 15.919] (**) NVIDIA(0): Enabling 2D acceleration
[ 16.497] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 16.498] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660 (GK106) at PCI:1:0:0 (GPU-0)
[ 16.498] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 16.498] (--) NVIDIA(0): VideoBIOS: 80.06.58.00.60
[ 16.498] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 16.510] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660 at PCI:1:0:0
[ 16.510] (--) NVIDIA(0): CRT-0
[ 16.510] (--) NVIDIA(0): Ancor Communications Inc ASUS VH238 (DFP-0) (boot, connected)
[ 16.510] (--) NVIDIA(0): DFP-1
[ 16.510] (--) NVIDIA(0): DFP-2
[ 16.510] (--) NVIDIA(0): DELL 2005FPW (DFP-3) (connected)
[ 16.510] (--) NVIDIA(0): DFP-4
[ 16.510] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 16.510] (--) NVIDIA(0): Ancor Communications Inc ASUS VH238 (DFP-0): Internal TMDS
[ 16.510] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VH238 (DFP-0): 330.0 MHz maximum pixel clock
[ 16.510] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 16.510] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 16.510] (--) NVIDIA(0): DFP-2: Internal TMDS
[ 16.510] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 16.510] (--) NVIDIA(0): DELL 2005FPW (DFP-3): Internal TMDS
[ 16.510] (--) NVIDIA(GPU-0): DELL 2005FPW (DFP-3): 330.0 MHz maximum pixel clock
[ 16.510] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 16.510] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 16.510] (**) NVIDIA(0): Option "Rotate" "left"
[ 16.510] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 16.510] (**) NVIDIA(0): device Ancor Communications Inc ASUS VH238 (DFP-0) (Using
[ 16.511] (**) NVIDIA(0): EDID frequencies has been enabled on all display
[ 16.511] (**) NVIDIA(0): devices.)
[ 16.512] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 16.512] (**) NVIDIA(0): device DELL 2005FPW (DFP-3) (Using EDID frequencies has
[ 16.512] (**) NVIDIA(0): been enabled on all display devices.)
[ 16.513] (II) NVIDIA(0): Validated MetaModes:
[ 16.513] (II) NVIDIA(0): "nvidia-auto-select+0+0{ForceFullCompositionPipeline=On}"
[ 16.513] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 16.539] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[ 16.539] (--) NVIDIA(0): option
[ 16.539] (--) Depth 24 pixmap format is 32 bpp
[ 16.999] (II) NVIDIA(GPU-1): Found DRM driver nvidia-drm (20150116)
[ 17.012] (II) NVIDIA(GPU-1): NVIDIA GPU GeForce GTX 660 (GK106) at PCI:2:0:0 (GPU-1)
[ 17.012] (--) NVIDIA(GPU-1): Memory: 2097152 kBytes
[ 17.012] (--) NVIDIA(GPU-1): VideoBIOS: 80.06.58.00.60
[ 17.012] (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X
[ 17.012] (--) NVIDIA(GPU-1): Valid display device(s) on GeForce GTX 660 at PCI:2:0:0
[ 17.012] (--) NVIDIA(GPU-1): CRT-0
[ 17.012] (--) NVIDIA(GPU-1): DFP-0
[ 17.012] (--) NVIDIA(GPU-1): DFP-1
[ 17.012] (--) NVIDIA(GPU-1): DFP-2
[ 17.012] (--) NVIDIA(GPU-1): DFP-3
[ 17.012] (--) NVIDIA(GPU-1): DFP-4
[ 17.012] (--) NVIDIA(GPU-1): CRT-0: 400.0 MHz maximum pixel clock
[ 17.012] (--) NVIDIA(GPU-1): DFP-0: Internal TMDS
[ 17.012] (--) NVIDIA(GPU-1): DFP-0: 330.0 MHz maximum pixel clock
[ 17.012] (--) NVIDIA(GPU-1): DFP-1: Internal TMDS
[ 17.012] (--) NVIDIA(GPU-1): DFP-1: 165.0 MHz maximum pixel clock
[ 17.012] (--) NVIDIA(GPU-1): DFP-2: Internal TMDS
[ 17.012] (--) NVIDIA(GPU-1): DFP-2: 165.0 MHz maximum pixel clock
[ 17.012] (--) NVIDIA(GPU-1): DFP-3: Internal TMDS
[ 17.012] (--) NVIDIA(GPU-1): DFP-3: 330.0 MHz maximum pixel clock
[ 17.012] (--) NVIDIA(GPU-1): DFP-4: Internal DisplayPort
[ 17.012] (--) NVIDIA(GPU-1): DFP-4: 400.0 MHz maximum pixel clock
[ 17.012] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 17.012] (II) NVIDIA: access.
[ 17.015] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 17.015] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 17.015] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 17.015] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 17.015] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 17.015] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 17.015] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 17.015] (II) NVIDIA(0): Config Options in the README.
[ 17.024] (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0{ForceFullCompositionPipeline=On}"
[ 17.116] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 17.116] (==) NVIDIA(0): Backing store enabled
[ 17.116] (==) NVIDIA(0): Silken mouse enabled
[ 17.116] (**) NVIDIA(0): DPMS enabled
[ 17.117] (II) Loading sub module "dri2"
[ 17.117] (II) LoadModule: "dri2"
[ 17.117] (II) Module "dri2" already built-in
[ 17.117] (II) NVIDIA(0): [DRI2] Setup complete
[ 17.117] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 17.117] (--) RandR disabled
[ 17.120] (II) Initializing extension GLX
[ 17.120] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 17.174] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 17.174] (**) Power Button: Applying InputClass "system-keyboard"
[ 17.174] (II) LoadModule: "evdev"
[ 17.174] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 17.177] (II) Module evdev: vendor="X.Org Foundation"
[ 17.177] compiled for 1.16.2, module version = 2.9.1
[ 17.177] Module class: X.Org XInput Driver
[ 17.177] ABI class: X.Org XInput driver, version 21.0
[ 17.177] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 41 paused 0
[ 17.177] (II) Using input driver 'evdev' for 'Power Button'
[ 17.177] (**) Power Button: always reports core events
[ 17.177] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 17.177] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 17.177] (--) evdev: Power Button: Found keys
[ 17.177] (II) evdev: Power Button: Configuring as keyboard
[ 17.177] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[ 17.177] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 17.177] (**) Option "xkb_rules" "evdev"
[ 17.177] (**) Option "xkb_model" "pc104"
[ 17.177] (**) Option "xkb_layout" "dvorak"
[ 17.197] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 17.197] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 17.197] (**) Power Button: Applying InputClass "system-keyboard"
[ 17.197] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 42 paused 0
[ 17.197] (II) Using input driver 'evdev' for 'Power Button'
[ 17.197] (**) Power Button: always reports core events
[ 17.197] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 17.197] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 17.197] (--) evdev: Power Button: Found keys
[ 17.197] (II) evdev: Power Button: Configuring as keyboard
[ 17.197] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event4"
[ 17.197] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 17.197] (**) Option "xkb_rules" "evdev"
[ 17.197] (**) Option "xkb_model" "pc104"
[ 17.197] (**) Option "xkb_layout" "dvorak"
[ 17.198] (II) config/udev: Adding input device USB full speed gaming keyboard (/dev/input/event2)
[ 17.198] (**) USB full speed gaming keyboard: Applying InputClass "evdev keyboard catchall"
[ 17.198] (**) USB full speed gaming keyboard: Applying InputClass "system-keyboard"
[ 17.198] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 43 paused 0
[ 17.198] (II) Using input driver 'evdev' for 'USB full speed gaming keyboard'
[ 17.198] (**) USB full speed gaming keyboard: always reports core events
[ 17.198] (**) evdev: USB full speed gaming keyboard: Device: "/dev/input/event2"
[ 17.198] (--) evdev: USB full speed gaming keyboard: Vendor 0x60b Product 0x6251
[ 17.198] (--) evdev: USB full speed gaming keyboard: Found keys
[ 17.198] (II) evdev: USB full speed gaming keyboard: Configuring as keyboard
[ 17.198] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7.4/4-1.7.4:1.0/0003:060B:6251.0003/input/input4/event2"
[ 17.198] (II) XINPUT: Adding extended input device "USB full speed gaming keyboard" (type: KEYBOARD, id 8)
[ 17.198] (**) Option "xkb_rules" "evdev"
[ 17.198] (**) Option "xkb_model" "pc104"
[ 17.198] (**) Option "xkb_layout" "dvorak"
[ 17.199] (II) config/udev: Adding input device USB full speed gaming keyboard (/dev/input/event3)
[ 17.199] (**) USB full speed gaming keyboard: Applying InputClass "evdev keyboard catchall"
[ 17.199] (**) USB full speed gaming keyboard: Applying InputClass "system-keyboard"
[ 17.199] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 44 paused 0
[ 17.199] (II) Using input driver 'evdev' for 'USB full speed gaming keyboard'
[ 17.199] (**) USB full speed gaming keyboard: always reports core events
[ 17.199] (**) evdev: USB full speed gaming keyboard: Device: "/dev/input/event3"
[ 17.199] (--) evdev: USB full speed gaming keyboard: Vendor 0x60b Product 0x6251
[ 17.199] (--) evdev: USB full speed gaming keyboard: Found 1 mouse buttons
[ 17.199] (--) evdev: USB full speed gaming keyboard: Found scroll wheel(s)
[ 17.199] (--) evdev: USB full speed gaming keyboard: Found relative axes
[ 17.199] (II) evdev: USB full speed gaming keyboard: Forcing relative x/y axes to exist.
[ 17.199] (--) evdev: USB full speed gaming keyboard: Found absolute axes
[ 17.199] (II) evdev: USB full speed gaming keyboard: Forcing absolute x/y axes to exist.
[ 17.199] (--) evdev: USB full speed gaming keyboard: Found keys
[ 17.199] (II) evdev: USB full speed gaming keyboard: Configuring as mouse
[ 17.199] (II) evdev: USB full speed gaming keyboard: Configuring as keyboard
[ 17.199] (II) evdev: USB full speed gaming keyboard: Adding scrollwheel support
[ 17.199] (**) evdev: USB full speed gaming keyboard: YAxisMapping: buttons 4 and 5
[ 17.199] (**) evdev: USB full speed gaming keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7.4/4-1.7.4:1.1/0003:060B:6251.0004/input/input5/event3"
[ 17.199] (II) XINPUT: Adding extended input device "USB full speed gaming keyboard" (type: KEYBOARD, id 9)
[ 17.199] (**) Option "xkb_rules" "evdev"
[ 17.199] (**) Option "xkb_model" "pc104"
[ 17.199] (**) Option "xkb_layout" "dvorak"
[ 17.200] (II) evdev: USB full speed gaming keyboard: initialized for relative axes.
[ 17.200] (WW) evdev: USB full speed gaming keyboard: ignoring absolute axes.
[ 17.200] (**) USB full speed gaming keyboard: (accel) keeping acceleration scheme 1
[ 17.200] (**) USB full speed gaming keyboard: (accel) acceleration profile 0
[ 17.200] (**) USB full speed gaming keyboard: (accel) acceleration factor: 2.000
[ 17.200] (**) USB full speed gaming keyboard: (accel) acceleration threshold: 4
[ 17.200] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[ 17.200] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 17.253] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 45 paused 0
[ 17.253] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 17.253] (**) Logitech USB Receiver: always reports core events
[ 17.253] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[ 17.253] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc531
[ 17.253] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 17.253] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 17.253] (--) evdev: Logitech USB Receiver: Found relative axes
[ 17.253] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 17.253] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 17.253] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 17.253] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 17.253] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17.253] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8:1.0/0003:046D:C531.0001/input/input2/event0"
[ 17.253] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 17.253] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 17.254] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 17.254] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 17.254] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 17.254] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 17.254] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 17.254] (II) No input driver specified, ignoring this device.
[ 17.254] (II) This device may have been added with another device file.
[ 17.254] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 17.255] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 17.255] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[ 17.255] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 46 paused 0
[ 17.255] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 17.255] (**) Logitech USB Receiver: always reports core events
[ 17.255] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 17.255] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc531
[ 17.255] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 17.255] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 17.255] (--) evdev: Logitech USB Receiver: Found relative axes
[ 17.255] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 17.255] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 17.255] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 17.255] (--) evdev: Logitech USB Receiver: Found keys
[ 17.255] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 17.255] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 17.255] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 17.256] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 17.256] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17.256] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8:1.1/0003:046D:C531.0002/input/input3/event1"
[ 17.256] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 17.256] (**) Option "xkb_rules" "evdev"
[ 17.256] (**) Option "xkb_model" "pc104"
[ 17.256] (**) Option "xkb_layout" "dvorak"
[ 17.256] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 17.256] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 17.256] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 17.256] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 17.256] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 17.256] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 17.256] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[ 17.256] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 17.257] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[ 17.257] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 47 paused 0
[ 17.257] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 17.257] (**) Eee PC WMI hotkeys: always reports core events
[ 17.257] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event7"
[ 17.257] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 17.257] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 17.257] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 17.257] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input10/event7"
[ 17.257] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[ 17.257] (**) Option "xkb_rules" "evdev"
[ 17.257] (**) Option "xkb_model" "pc104"
[ 17.257] (**) Option "xkb_layout" "dvorak"
[ 17.258] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 17.258] (II) No input driver specified, ignoring this device.
[ 17.258] (II) This device may have been added with another device file.
[ 17.324] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17.324] (**) NVIDIA(0): device DELL 2005FPW (DFP-3) (Using EDID frequencies has
[ 17.324] (**) NVIDIA(0): been enabled on all display devices.)
[ 17.330] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17.331] (**) NVIDIA(0): device Ancor Communications Inc ASUS VH238 (DFP-0) (Using
[ 17.331] (**) NVIDIA(0): EDID frequencies has been enabled on all display
[ 17.331] (**) NVIDIA(0): devices.)
[ 17.404] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1080 +0+600 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 17.416] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1080 +0+600 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-D-0: nvidia-auto-select @1050x1680 +1920+0 {ViewPortIn=1050x1680, ViewPortOut=1680x1050+0+0, Rotation=90}"
[ 17.570] (II) evdev: Eee PC WMI hotkeys: Close
[ 17.570] (II) UnloadModule: "evdev"
[ 17.570] (II) systemd-logind: releasing fd for 13:71
[ 17.623] (II) evdev: Logitech USB Receiver: Close
[ 17.623] (II) UnloadModule: "evdev"
[ 17.623] (II) systemd-logind: releasing fd for 13:65
[ 17.676] (II) evdev: Logitech USB Receiver: Close
[ 17.676] (II) UnloadModule: "evdev"
[ 17.676] (II) systemd-logind: releasing fd for 13:64
[ 17.730] (II) evdev: USB full speed gaming keyboard: Close
[ 17.730] (II) UnloadModule: "evdev"
[ 17.730] (II) systemd-logind: releasing fd for 13:67
[ 17.783] (II) evdev: USB full speed gaming keyboard: Close
[ 17.783] (II) UnloadModule: "evdev"
[ 17.783] (II) systemd-logind: releasing fd for 13:66
[ 17.836] (II) evdev: Power Button: Close
[ 17.836] (II) UnloadModule: "evdev"
[ 17.836] (II) systemd-logind: releasing fd for 13:68
[ 17.863] (II) evdev: Power Button: Close
[ 17.863] (II) UnloadModule: "evdev"
[ 17.863] (II) systemd-logind: releasing fd for 13:69
[ 18.228] (II) NVIDIA(GPU-1): Deleting GPU-1
[ 18.228] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 18.231] (II) Server terminated successfully (0). Closing log file. -
Erroneous "IE 6.0 or greater" error message on Reader 10.0.1 install
Greetings,
We have recently upgraded to Reader 10.0.1 and this was done by a group policy push. 47 PCs accepted the Reader update correctly.
However, 3 PCs failed to take the update. I have tried doing a manual install on these PCs but this also failed with this erroneous error message:
"Adobe Reader X (10.0.1) requires Internet Explorer 6.0 or greater....."
All our PCs are identically configured using a Standard Desktop Configuration, so I know the error msg doesn't make any sense.
We are using Vista and Internet Explorer version 7.
Any suggestions on how to fix this?
TonyI'm having the same issue. Our environment is Windows 7 and Internet Explorer 8. Deploying with AD or manual install give the same error message. The registry and IE8 both report the correct version.
-
Bogus error message: "The field jnlp has an invalid value: https."
We are running into a variant of an old bug. With a Windows XP client using JRE 1.5.0_05, we get:
{noformat}Launch File Error: The field <jnlp> has an invalid value: https
Java 1.4+ is required for HTTPS support{noformat}
which of course is a strange thing for a 1.5 JRE to be squawking about. We found a Sun bug report 6433293 that reports this behavior as occuring on Solaris but not on Windows. We're seeing it on Windows. The bug report suggests that the error message text is the "wrong message" and may be totally unrelated to the actual problem (although it is triggered by having an https URL in the "href" attribute of the <jnlp> tag).
Because of our customer environment, upgrading the JRE beyond 1.5.0_05 is NOT an option for us. I googled the message and found one blogpost that suggested the error may be related to the XML encoding (which seems surprising, but they claimed changing the encoding fixed the problem for them). I tried fiddling with the encoding values, but to no avail. Anyone know anything about this bug, and any possible workarounds?We finally found the solution to this, so I will follow up for the sake of posterity. Thanks, Andrew, for the pointer to JaNeLa. While it didn't tip us off to this particular problem, it did get us thinking in the right direction: that there was something about the JNLP file, completely unrelated to what the error message was reporting, that was causing the problem. Turns out that the Java 1.5.0_05 WebStart JNLP parser had a bug, such that it was tripped up by a JNLP file containing more than one XML comment in immediate succession. It seems unbelievable, but it was completely reproducible. Our JNLP file began like this:
<?xml version="1.0" encoding="utf-8"?>
<!-- here's a valid XML comment -->
<!-- here's another valid XML comment, but it freaks out JWS 1.5.0_05 -->
<jnlp spec="1.0+" codebase="https://ourserver/ourApp" href="https://ourserver/ourApp/ourApp.jnlp"/> By accounts, this was patched in 1.5.0_10, and we know that the problem didn't occur in 1.6.0_13. In case anyone else has this problem, that's something to look for. (Note: this isn't the only cause of this erroneous error message. It apparently got printed out when the parser was unhappy about various things. I saw another report that someone had a problem with their "encoding" attribute value on their xml header, and fixing that solved their problem.) -
Receiving error message "remove shipping lock from yellow cartridge" Laserjet CP1525n
Purchased replacement yellow cartridge and followed replacement instructions. Now receiving error message that the shipping lock needs removed. It has been removed but printer will not operate and I continue to receive the message.
I would verfiy that all packing material was removed by viewing this link here. After that if you are still getting that error message, I would do a hard rest to the machine. No user settings are lost with a hard reset and it will attempt to clear erroneous error message and restore the printer to a known working condition if possible. To do a hard reset:
1. With the printer plugged directly into a wall outlet, and turned on, unplug the cord from the rear of the printer.
2. Then unplug the cord from the wall socket.
3. Wait at least 30-60 seconds
4. Plug the power cord back into the wall socket first. If the cord has a module in it, make sure that the light on the module is lit up and then plug cord back into the rear of the printer
5. The printer might power back on by itself, but if not use the power button on the machine to turn it back on.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved? -
[Solved] xorg server & keyboard conf error messages after upgrade
I ran my daily upgrade (today was big, from FF to the kernel to xorg) and I was not able to login on GDM afterwards.
It's weird. The X server will start, and so will the GDM login screen. But entering the password will result in a GDM crash (I later found out that KDM and SLIM have the same issue; KDM not starting and SLIM refusing the keyboard input). So after starting an alternate console and trying to start x (startx), I have this error message:
"Th e XKEYBOARDMAP keymap compiler (xbcomp) reports:
Error: Cannot close "/tmp/server-0.xkm" properly (not enough space?)
Output file "/tmp/server-0.xkm" removed
Errors from xkbcomp are not fatal to the X server
XKB: Failed to compile keymap
Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config.
Fatal server error:
Failed to activate core devices "
I have been fiddling with the keyboard config on xorg.conf but I'm not sure I'm getting anywhere. Also, I downgraded the xorg-server and xkeyboard config packages just to be sure.
Any clue?
Thanks!
Last edited by southerncross (2012-07-24 15:46:38)Well... seems I didn't have any answer on this. I fiddled a bit more but I have to say that I really came to wits' end at this stage. A couple of observations though:
* I don't really understand this notion of a keyboard issue. My keyboard and its layout work properly but I will not be able to login regardless of login through GDM, KDM or Slim. Yet it's worth noting that in the case of GDM and SLIM the X server starts; I see the graphical interface, I click, etc. but when I type the trouble starts.
* I tried to check my xsessions-errors file. The file is really big under a frame buffer, and it wasn't clear to me, but I found strange that the log was reporting all sorts of attempts to start KDE. I don't exactly know what's going on.
If anybody has any clue, let me know... It's becoming very frustrating.
Thanks! -
Are some TM error messages erroneous?
What does this error message mean? Does it truly mean that a German themed FCP help file is fouling up my back up attempt? Or are some of these messages erroneous?
Nov 17 09:27:38 Macintosh /System/Library/CoreServices/backupd124: Error: (-36) SrcErr:NO Copying /Applications/Final Cut Pro.app/Contents/Resources/German.lproj/Final Cut Pro Help/Final Cut Pro Benutzerhandbuch.pdf to /Volumes/SurLaBackup/Backups.backupdb/Dior's Computer/2008-11-17-084712.inProgress/7E5E3459-554E-47CD-AAAD-E2F3D5FA3AB1/Pemb erley HD/Applications/Final Cut Pro.app/Contents/Resources/German.lproj/Final Cut Pro HelpDior wrote:
What does this error message mean? Does it truly mean that a German themed FCP help file is fouling up my back up attempt? Or are some of these messages erroneous?
Yes
Nov 17 09:27:38 Macintosh /System/Library/CoreServices/backupd124: Error: (-36) SrcErr:NO Copying /Applications/Final Cut Pro.app/Contents/Resources/German.lproj/Final Cut Pro Help/Final Cut Pro Benutzerhandbuch.pdf to /Volumes/SurLaBackup/Backups.backupdb/Dior's Computer/2008-11-17-084712.inProgress/7E5E3459-554E-47CD-AAAD-E2F3D5FA3AB1/Pemb erley HD/Applications/Final Cut Pro.app/Contents/Resources/German.lproj/Final Cut Pro Help
Final Cut has many languages installed. Apparently one these files is corrupt. The German Help file.
Have you run DU and repaired HD and permissions recently?
If so, you might try DiskWarrior
Otherwise I would make a backup clone with SuperDuper! or CCC and test it and then see if you can remove the errant file. Bear in mind that this might cause other problems which is why you make the clone first.
You might also use Pacifist and reinstall the German Help file from the CD. -
Error message when installing nvidia-173xx package
I get an error message when I try to install nvidia-173xx driver:
pacaur -S nvidia-173xx
:: Package(s) nvidia-173xx not found in repositories, trying AUR...
:: resolving dependencies...
cat: /usr/lib/modules/extramodules-3.15-ARCH/version: No such file or directory
:: no results found for linux
:: no results found for linux-headers
My kernel version: 3.16.1-1-ARCH
What can I do to install it correctly?nvidia-173xx AUR page wrote:inux>=3.15.5
linux<3.16
linux-headers>=3.15.5 (make)
linux-headers<3.16 (make)
nvidia-173xx-utils
Looks like you can choose from :
-contact the maintainer to see if you can help with getting it to work with kernel 3.16
- downgrade the kernel
- switch to nouveau
Note that there are comments on the aur page that state nvidia-173xx doesn't work with xorg 1.16, so you may have to downgrade more then just the kernel. -
I completed a very large complex project in Photoshop, and had a complex path copied to my clipboard from Illustrator and was pasting it into PS. I placed it as a shape and got the following error message:
Could not complete the Open command because the path is too complex
O.K., I can live with that, EXCEPT my document, while it opens, has ZERO layers.
Is there any way to recover?Hi. I don't know if you still need this. It could be useful for whoever else gets this error. I just had this problem too. I had a couple of very complex paths imported from Illustrator and I think other vector masks just took the file over board, so that when I next opened it I received that same message: "Could not complete task because the path is too complex" Here is a workaround that I found.
You can still use the Move Tool(shortcut key "v") to select layers and there are a couple of things you can do with it.
1.You can create a new PS file of the same dimensions (and most importantly same resolution or the scales will be different).
a) make sure the "corrupted" and the new files are side by side or overlapping so that you can see edges of both...
b)Right click the erroneous document and choose the layer you want to move from the context menu. (You may get the "path too complex" message again when you do anything with the document, just click "ok")
c)Click and drag the layer from old document into the new.
d)Continue with all layers if desired.
2. Figure out which layer(s) might be taxing the document with paths and either move just that one into a different document or delete it.
a)To delete go to "Layer" menu --> "Delete" --> "Layer"
It worked for me. Best if you are in the habit of naming your files. -
Change of error message into warning message
While doing FBZP i have found the following error.
Clearing acct only allowed for an outgoing bill of exch.pmnt
Message no. F3029
I am not able to go further, the above message is coming.
I want to make the error message into warning message.
Please suggest, how to overcomeHello BSR,
The Error message F3029 is raised when the clearing account (T042I-VKONT) is filled but the payment method in question is not defined as "Bill/exchange".
I assume that the field is not changable at the moment. You may make necessary changes (delete the entry or delete the specified account) with the instructions below.
1. Go to Tcd: FBZP -> Click [Pmt methods in country]
2. Select the entry for the erroneous country(?)/payment method
3. Change Payment method classification to 'Bill/ex' and save
Now you should be able to change "Set Up Bank Determination for Payment
Transactions" table.
If you still want to use this payment method, please change back to the original classification after making necessary changes in T042I.
I believe this information would help you in resolving the reported issue.
Best Regards,
Vanessa Barth. -
Hi,
I have designed a Custom screen for one of my requirements. However when the screen is displayed, I am facing an error message from SAP Front End Server that says " Erroneous data received from server. Application may not work correctly".
What could be the reason ?
Thanks & Regards,
Venkatesh.Hi,
Please check the belos SAP notes
1453114 Maximum string length
1161022 Dialog box "Erroneous data received from server"
1524462 - Erroneous Data received from server. Application may not work correctly.
Regards,
Naveen. -
Error Message ISSR452 while creating Financial Transaction
Hi Experts,
While creating Fixed Deposit in FTR_CREATE is get the following error message
No master data selected for fixed asset
Message no. ISSR452
This message no relevance to current Fixed Deposit transaction. Also no related post or Note is available
Please adviceHi,
the message is coming from regulatory reporting (FS-SR) - have you activated it erroneously?
If it is supposed to be active, but you want to save the deal despite of errors, please check note 1864243 on how to activate the enhancement BADI_ISSR_ADMN_MESSAGE_MM.
Best regards,
Marie -
Error message when computer is booting up.....AppleNotifierSync.exe
I thought that it may have been just me. After reading other posts which state that others are getting the same message, I now feel not so all alone. I have a clue that I don't know what to do with...but here it is...
I just bought a new Ipod nano, and had to download the latest Itunes in order to sync my new pod. The error message in question just occurred after downloading the latest Itunes. No such message while using the older version.You're starting X via inittab I assume? While booting, append 3 to the kernel line in grub (just the number 3, nothing else) and continue booting, this way it won't even attempt to start X. Then you can go through your configuration and log files, especially Xorg.0.log.
-
[Solved] Xorg Macbook Pro 4,1 Errors
Hello everyone. It's my first time here and I've come with issues that I was hoping to get some help with. After finally getting Arch onto my Macbook Pro 4,1 (Early 2008), I'm stumped with Xorg. For reference, after logging in the first time and setting up my wifi and the base Xorg configuration, I ran:
sudo pacman -S nvidia
sudo pacman -U /mnt/usb/lib32-nvidia-utils-331.20-1-x86_64.pkg.tar.xz
Long story short, I rebooted as per the instructions then ran:
startx
but received errors. Below is my xorg.conf followed by the Xorg.0.log file. Any help would be greatly appreciated. Thanks.
xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 331.20 (buildmeister@swio-display-x86-rhel47-05) Wed Oct 30 18:20:53 PDT 2013
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600M GT"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "UseDPLib" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Xorg.0.log
[ 585.317]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[ 585.322] X Protocol Version 11, Revision 0
[ 585.324] Build Operating System: Linux 3.11.6-1-ARCH x86_64
[ 585.325] Current Operating System: Linux archer 3.12.0-1-ARCH #1 SMP PREEMPT Wed Nov 6 09:06:27 CET 2013 x86_64
[ 585.325] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/sda6 rw nomodeset nouveau.modset=0 quiet
[ 585.328] Build Date: 01 November 2013 05:10:48PM
[ 585.330]
[ 585.331] Current version of pixman: 0.32.4
[ 585.335] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 585.335] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 585.341] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 20 19:34:04 2013
[ 585.343] (==) Using config file: "/etc/X11/xorg.conf"
[ 585.345] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 585.345] (==) ServerLayout "Layout0"
[ 585.345] (**) |-->Screen "Screen0" (0)
[ 585.345] (**) | |-->Monitor "Monitor0"
[ 585.345] (**) | |-->Device "Device0"
[ 585.345] (**) |-->Input Device "Keyboard0"
[ 585.345] (**) |-->Input Device "Mouse0"
[ 585.345] (==) Automatically adding devices
[ 585.345] (==) Automatically enabling devices
[ 585.345] (==) Automatically adding GPU devices
[ 585.345] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 585.345] Entry deleted from font path.
[ 585.345] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 585.345] Entry deleted from font path.
[ 585.345] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 585.345] Entry deleted from font path.
[ 585.345] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 585.345] Entry deleted from font path.
[ 585.345] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 585.345] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 585.345] Entry deleted from font path.
[ 585.345] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 585.345] (==) FontPath set to:
/usr/share/fonts/misc/
[ 585.345] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 585.345] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 585.345] (WW) Disabling Keyboard0
[ 585.345] (WW) Disabling Mouse0
[ 585.345] (II) Loader magic: 0x7fdc20
[ 585.345] (II) Module ABI versions:
[ 585.345] X.Org ANSI C Emulation: 0.4
[ 585.345] X.Org Video Driver: 14.1
[ 585.345] X.Org XInput driver : 19.1
[ 585.345] X.Org Server Extension : 7.0
[ 585.345] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 585.348] (--) PCI:*(0:1:0:0) 10de:0407:106b:00a3 rev 161, Mem @ 0x92000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x00007000/128, BIOS @ 0x????????/131072
[ 585.350] Initializing built-in extension Generic Event Extension
[ 585.352] Initializing built-in extension SHAPE
[ 585.353] Initializing built-in extension MIT-SHM
[ 585.355] Initializing built-in extension XInputExtension
[ 585.356] Initializing built-in extension XTEST
[ 585.358] Initializing built-in extension BIG-REQUESTS
[ 585.359] Initializing built-in extension SYNC
[ 585.361] Initializing built-in extension XKEYBOARD
[ 585.362] Initializing built-in extension XC-MISC
[ 585.363] Initializing built-in extension SECURITY
[ 585.365] Initializing built-in extension XINERAMA
[ 585.366] Initializing built-in extension XFIXES
[ 585.367] Initializing built-in extension RENDER
[ 585.369] Initializing built-in extension RANDR
[ 585.370] Initializing built-in extension COMPOSITE
[ 585.371] Initializing built-in extension DAMAGE
[ 585.372] Initializing built-in extension MIT-SCREEN-SAVER
[ 585.374] Initializing built-in extension DOUBLE-BUFFER
[ 585.375] Initializing built-in extension RECORD
[ 585.376] Initializing built-in extension DPMS
[ 585.377] Initializing built-in extension X-Resource
[ 585.378] Initializing built-in extension XVideo
[ 585.380] Initializing built-in extension XVideo-MotionCompensation
[ 585.381] Initializing built-in extension XFree86-VidModeExtension
[ 585.382] Initializing built-in extension XFree86-DGA
[ 585.383] Initializing built-in extension XFree86-DRI
[ 585.384] Initializing built-in extension DRI2
[ 585.384] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
[ 585.384] (WW) "DRI2" will not be loaded unless you've specified it to be loaded elsewhere.
[ 585.384] (WW) "nouveau" will not be loaded unless you've specified it to be loaded elsewhere.
[ 585.384] (II) "glx" will be loaded by default.
[ 585.384] (II) LoadModule: "glx"
[ 585.384] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 585.404] (II) Module glx: vendor="NVIDIA Corporation"
[ 585.404] compiled for 4.0.2, module version = 1.0.0
[ 585.404] Module class: X.Org Server Extension
[ 585.404] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
[ 585.405] Loading extension GLX
[ 585.405] (II) LoadModule: "nvidia"
[ 585.405] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 585.405] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 585.405] compiled for 4.0.2, module version = 1.0.0
[ 585.406] Module class: X.Org Video Driver
[ 585.406] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
[ 585.406] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 585.406] (++) using VT number 1
[ 585.406] (II) Loading sub module "fb"
[ 585.406] (II) LoadModule: "fb"
[ 585.406] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 585.406] (II) Module fb: vendor="X.Org Foundation"
[ 585.406] compiled for 1.14.4, module version = 1.0.0
[ 585.406] ABI class: X.Org ANSI C Emulation, version 0.4
[ 585.406] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 585.406] (II) Loading sub module "wfb"
[ 585.406] (II) LoadModule: "wfb"
[ 585.406] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 585.406] (II) Module wfb: vendor="X.Org Foundation"
[ 585.406] compiled for 1.14.4, module version = 1.0.0
[ 585.406] ABI class: X.Org ANSI C Emulation, version 0.4
[ 585.406] (II) Loading sub module "ramdac"
[ 585.406] (II) LoadModule: "ramdac"
[ 585.406] (II) Module "ramdac" already built-in
[ 585.407] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 585.407] (==) NVIDIA(0): RGB weight 888
[ 585.407] (==) NVIDIA(0): Default visual is TrueColor
[ 585.407] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 585.407] (**) NVIDIA(0): Enabling 2D acceleration
[ 585.417] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 585.417] (EE) NVIDIA(GPU-0): check your system's kernel log for additional error
[ 585.417] (EE) NVIDIA(GPU-0): messages and refer to Chapter 8: Common Problems in the
[ 585.417] (EE) NVIDIA(GPU-0): README for additional information.
[ 585.417] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
[ 585.417] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 585.417] (II) UnloadModule: "nvidia"
[ 585.417] (II) UnloadSubModule: "wfb"
[ 585.417] (II) UnloadSubModule: "fb"
[ 585.417] (EE) Screen(s) found, but none have a usable configuration.
[ 585.417] (EE)
Fatal server error:
[ 585.417] (EE) no screens found(EE)
[ 585.417] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 585.417] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 585.417] (EE)
[ 585.421] (EE) Server terminated with error (1). Closing log file.
If there's any other information needed, let me know.
Last edited by Proxy (2013-11-24 16:19:29)I tried installing that, removed nvidia because of the conflicts, restarted then ran it again. Still errors. I've included the updated log file:
[ 162.658]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[ 162.662] X Protocol Version 11, Revision 0
[ 162.663] Build Operating System: Linux 3.11.6-1-ARCH x86_64
[ 162.664] Current Operating System: Linux archer 3.12.1-1-ARCH #1 SMP PREEMPT Thu Nov 21 08:18:42 CET 2013 x86_64
[ 162.665] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/sda6 rw nomodeset quiet
[ 162.667] Build Date: 01 November 2013 05:10:48PM
[ 162.668]
[ 162.669] Current version of pixman: 0.32.4
[ 162.672] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 162.672] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 162.677] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 22 20:19:10 2013
[ 162.679] (==) Using config file: "/etc/X11/xorg.conf"
[ 162.680] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 162.680] (==) ServerLayout "Layout0"
[ 162.680] (**) |-->Screen "Screen0" (0)
[ 162.680] (**) | |-->Monitor "Monitor0"
[ 162.680] (**) | |-->Device "Device0"
[ 162.680] (**) |-->Input Device "Keyboard0"
[ 162.680] (**) |-->Input Device "Mouse0"
[ 162.680] (==) Automatically adding devices
[ 162.680] (==) Automatically enabling devices
[ 162.681] (==) Automatically adding GPU devices
[ 162.681] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 162.681] Entry deleted from font path.
[ 162.681] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 162.681] Entry deleted from font path.
[ 162.681] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 162.681] Entry deleted from font path.
[ 162.681] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 162.681] Entry deleted from font path.
[ 162.681] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 162.681] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 162.681] Entry deleted from font path.
[ 162.681] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 162.681] (==) FontPath set to:
/usr/share/fonts/misc/
[ 162.681] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 162.681] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 162.681] (WW) Disabling Keyboard0
[ 162.681] (WW) Disabling Mouse0
[ 162.681] (II) Loader magic: 0x7fdc20
[ 162.681] (II) Module ABI versions:
[ 162.681] X.Org ANSI C Emulation: 0.4
[ 162.681] X.Org Video Driver: 14.1
[ 162.681] X.Org XInput driver : 19.1
[ 162.681] X.Org Server Extension : 7.0
[ 162.683] (--) PCI:*(0:1:0:0) 10de:0407:106b:00a3 rev 161, Mem @ 0x92000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x00007000/128, BIOS @ 0x????????/131072
[ 162.685] Initializing built-in extension Generic Event Extension
[ 162.686] Initializing built-in extension SHAPE
[ 162.688] Initializing built-in extension MIT-SHM
[ 162.689] Initializing built-in extension XInputExtension
[ 162.690] Initializing built-in extension XTEST
[ 162.692] Initializing built-in extension BIG-REQUESTS
[ 162.693] Initializing built-in extension SYNC
[ 162.695] Initializing built-in extension XKEYBOARD
[ 162.696] Initializing built-in extension XC-MISC
[ 162.698] Initializing built-in extension SECURITY
[ 162.699] Initializing built-in extension XINERAMA
[ 162.700] Initializing built-in extension XFIXES
[ 162.702] Initializing built-in extension RENDER
[ 162.703] Initializing built-in extension RANDR
[ 162.705] Initializing built-in extension COMPOSITE
[ 162.706] Initializing built-in extension DAMAGE
[ 162.707] Initializing built-in extension MIT-SCREEN-SAVER
[ 162.709] Initializing built-in extension DOUBLE-BUFFER
[ 162.710] Initializing built-in extension RECORD
[ 162.711] Initializing built-in extension DPMS
[ 162.712] Initializing built-in extension X-Resource
[ 162.714] Initializing built-in extension XVideo
[ 162.715] Initializing built-in extension XVideo-MotionCompensation
[ 162.716] Initializing built-in extension XFree86-VidModeExtension
[ 162.717] Initializing built-in extension XFree86-DGA
[ 162.718] Initializing built-in extension XFree86-DRI
[ 162.719] Initializing built-in extension DRI2
[ 162.719] (II) LoadModule: "glx"
[ 162.719] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 162.719] (II) Module glx: vendor="X.Org Foundation"
[ 162.719] compiled for 1.14.4, module version = 1.0.0
[ 162.719] ABI class: X.Org Server Extension, version 7.0
[ 162.719] (==) AIGLX enabled
[ 162.720] Loading extension GLX
[ 162.720] (II) LoadModule: "nvidia"
[ 162.720] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 162.721] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 162.721] compiled for 4.0.2, module version = 1.0.0
[ 162.721] Module class: X.Org Video Driver
[ 162.721] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
[ 162.721] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 162.721] (++) using VT number 1
[ 162.721] (II) Loading sub module "fb"
[ 162.721] (II) LoadModule: "fb"
[ 162.721] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 162.721] (II) Module fb: vendor="X.Org Foundation"
[ 162.721] compiled for 1.14.4, module version = 1.0.0
[ 162.721] ABI class: X.Org ANSI C Emulation, version 0.4
[ 162.721] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 162.721] (II) Loading sub module "wfb"
[ 162.721] (II) LoadModule: "wfb"
[ 162.721] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 162.722] (II) Module wfb: vendor="X.Org Foundation"
[ 162.722] compiled for 1.14.4, module version = 1.0.0
[ 162.722] ABI class: X.Org ANSI C Emulation, version 0.4
[ 162.722] (II) Loading sub module "ramdac"
[ 162.722] (II) LoadModule: "ramdac"
[ 162.722] (II) Module "ramdac" already built-in
[ 162.723] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 162.723] (EE) NVIDIA: system's kernel log for additional error messages.
[ 162.723] (EE) No devices detected.
[ 162.723] (EE)
Fatal server error:
[ 162.723] (EE) no screens found(EE)
[ 162.723] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 162.723] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 162.723] (EE) -
Error message from trace result-SAP BI
All,
I got an error message from RSRT trace-you have no authorization for info provider---EYE 001.
WHAT IS MEAN BY EYE 001???Hi,
Please check the belos SAP notes
1453114 Maximum string length
1161022 Dialog box "Erroneous data received from server"
1524462 - Erroneous Data received from server. Application may not work correctly.
Regards,
Naveen.
Maybe you are looking for
-
My iPod will no longer charge with a wall charger, only the computer. I know it's not becuase of the wall piece or my cord, since I also use the same cord for computer charging, and the wall piece seems to work with others devices. It worked a couple
-
Error during creation of transfer orders for material
Hi, We are doing a transfer of stock from one storage with WM to a storage without WM. But system does not finish the process automatically displaing the following error message: "Error during creation of transfer orders for material document
-
Clear block not working !! help required asap
We have used clearblock all inside a fix command, it used to work before and when we migrated over to new server it is failing to work. It is not throwing out an error but it is not clearing. I checked the difference at the database level and found t
-
New Server: How do we aim ALL users email accounts to use the new addresses
We have a new server which we are using for mail (incl. smtp), we need to be able to make it so when a user logs in and loads mail (just like they would have done before) it finds their new email account as seamlessly as possible. In a windows enviro
-
Hi, I am developing a mobile application and I wanted to test it on a real device, so I choose Samsung S5570, because it has Android 2.2 and I read that this Android version is compatible with Adobe Air. When I wanted to install adobeair.apk, on Mark