Xorg Segfaulting on viewing console (ctl+alt+f1) after nvidia upgrade
I upgraded nvidia and nvidia-utils yesterday to the current nvidia-utils 169.09-2 and nvidia-utils 169.09-1 versions respectively. Pacman complained about the presence of /usr/lib/libXvMCNVIDIA_dynamic.so.1, so I followed the advice here (http://archlinux.org/pipermail/arch-gen … 16508.html) and did a -Sf installation. After that the installation and restart (I upgraded the kernel at the same time), went smoothly.
I run icewm, but boot to the console and start X manually. I tend to drop back into the console (ctl+alt+f1) fairly regularly. The X-server has now begun to catch Sig 11 and segfault (unpredictably), when I go to the console. It has happened three times today - the Xorg log terminates with :
Backtrace:
0: /usr/bin/X(xf86SigHandler+0x7e) [0x80baf4e]
1: [0xb7f0f420]
Fatal server error:
Caught signal 11. Server aborting
Any ideas please?
I'm posting here the setup of my /usr/lib/xorg/modules so you guys can see if there's a difference from removing the old package on the update or deleting the files by hand.
drwxr-xr-x 2 root root 26 Jan 25 16:59 drivers
drwxr-xr-x 2 root root 4,0K Fev 11 12:13 extensions
drwxr-xr-x 2 root root 27 Fev 3 12:59 fonts
drwxr-xr-x 2 root root 42 Nov 5 20:45 input
-rwxr-xr-x 1 root root 145K Fev 3 12:59 libafb.so
-rwxr-xr-x 1 root root 298K Fev 3 12:59 libcfb.so
-rwxr-xr-x 1 root root 114K Fev 3 12:59 libcfb32.so
-rwxr-xr-x 1 root root 63K Fev 3 12:59 libexa.so
-rwxr-xr-x 1 root root 160K Fev 3 12:59 libfb.so
-rwxr-xr-x 1 root root 30K Fev 3 12:59 libint10.so
-rwxr-xr-x 1 root root 133K Fev 3 12:59 libmfb.so
-rwxr-xr-x 1 root root 269K Jan 25 16:59 libnvidia-wfb.so.169.09
-rwxr-xr-x 1 root root 954K Fev 3 12:59 libpcidata.so
-rwxr-xr-x 1 root root 2,1M Fev 3 12:59 libscanpci.so
-rwxr-xr-x 1 root root 22K Fev 3 12:59 libshadow.so
-rwxr-xr-x 1 root root 26K Fev 3 12:59 libshadowfb.so
-rwxr-xr-x 1 root root 23K Fev 3 12:59 libvbe.so
-rwxr-xr-x 1 root root 28K Fev 3 12:59 libvgahw.so
lrwxrwxrwx 1 root root 45 Fev 11 12:13 libwfb.so -> /usr/lib/xorg/modules/libnvidia-wfb.so.169.09
-rwxr-xr-x 1 root root 196K Fev 3 12:59 libwfb.so.1.4
-rwxr-xr-x 1 root root 355K Fev 3 12:59 libxaa.so
-rwxr-xr-x 1 root root 158K Fev 3 12:59 libxf1bpp.so
-rwxr-xr-x 1 root root 95K Fev 3 12:59 libxf4bpp.so
-rwxr-xr-x 1 root root 4,8K Fev 3 12:59 libxf8_16bpp.so
-rwxr-xr-x 1 root root 161K Fev 3 12:59 libxf8_32bpp.so
drwxr-xr-x 2 root root 26 Fev 3 12:59 linux
drwxr-xr-x 2 root root 150 Fev 3 12:59 multimedia
Similar Messages
-
OSD Exits to Ctl-Alt-Del after Reboot from Software Update, leaves Clients in provisioning mode
We are seeing a problem where the Windows 7 SP1 OSD wrongly exits to the Ctl-Alt-Del screen: This problem is occuring with about %25 of our Newly Imaged PCs during the Software Updates step of the Task Sequence (of which there is about 9
outstanding updates), the PCs are rebooted as 4 of these updates finish with COMPLETE_SOFT_REBOOT_NEEDED.
After the Software Updates Reboot the following errors are found:
SMSTS.log reports:
Failed to set log directory. Some execution history may be lost. The system cannot find the file specified. (Error: 80070002; Source: Windows)
UpdatesDeployment.log reports:
Failed to save an instance of CCM_TargetedUpdateEx1, error 80041033 UpdatesDeploymentAgent 3/04/2013 4:56:39 PM 3080 (0x0C08)
Failed to get class instance for CCM_TargetedUpdateEx1, error 80041033 UpdatesDeploymentAgent 3/04/2013 4:56:39 PM 3080 (0x0C08)
ExecMgr.log Reports:
Failed to open to WMI namespace '\\.\root\ccm\Policy\Machine' (8007045b) execmgr 3/04/2013 4:56:39 PM 3496 (0x0DA8)
Failed to ConnectSettings for ICcmPolicyAgent in CSoftDistPolicyNamespace::ConnectToNamespace execmgr 3/04/2013 4:56:39 PM 3496 (0x0DA8)
Failed to ConnectToNamespace in CSoftDistPolicyNamespace::GetMachinePolicy execmgr 3/04/2013 4:56:39 PM 3496 (0x0DA8)
Failed to connect to machine policy name space. 0x8007045b execmgr 3/04/2013 4:56:39 PM 3496 (0x0DA8)
Failed to connect to user policy name space execmgr 3/04/2013 4:56:39 PM 3496 (0x0DA8)
I have checked the logs based on other forum suggestions I can say the following:
-Network adapter is getting valid address;
-I do not have a step for "Install Roles and Features";
-I can apply registry changes for each machine to take them out of Provisioning mode, and after that I dont have any problems - this is far from the solution that I hope for.Any update on this as I am struggling with this issue for the past few days ?
Our image was built last year so when I want to recreate it, it has to do 150 updates. We don't have WSUS updates into SCCM so I had to use a wsf script to get the updates from our WSUS server.
If I image the computer without doing the updates and do them manually by running the script here is what happens :
1st execution of the script : 137 updates installed and a reboot is required
I manually reboot
2nd execution of the script : 13 updates installed and a reboot is required
I manually reboot
3rd execution of the script : 4 updates installed
I manually reboot
4th execution of the script : no updates required.
If I only do 1 execution of the script in my TS : it works fine, it installs the 137 updates but then when the PC is done imaging, it still needs the 13+4 other updates which I don't really like.
At first, I tried adding this in my TS:
WSUS 1/3
System restart (triggered by the TS)
WSUS 2/3
System restart (triggered by the TS)
WSUS 3/3
System restart (triggered by the TS)
This stops at step #2, I see it do the 137 updates and then when it reboots, it goes into provisioning mode and doesn't continue. Looks like there is an issue with the reboot so...
I have tried removing the reboot as follows
WSUS 1/3
WSUS 2/3
WSUS 3/3
This installs the 137 updates in step #1 and downloads the 13 updates in step 2 and 3 but log file says a reboot is required to install them. The TS then continues but once it meets a System restart triggered by the TS, it doesn't resume the TS and goes
also in provisionning mode.
Any idea on why it goes into provisioning mode after installing the updates ? To me, it looks like there is a probably with the state that WSUS puts the computer in, like it is pending reboot but the System restart by the TS doesn't seem to work when trying
the reboot ?
Thanks!!!! -
Cannot Ctrl+Alt+F1 after nvidia-173xx update
I have recently discovered that I cannot switch into "terminal mode" with the latest nvidia-173xx drivers (nvidia-173xx-173.14.25-1 and nvidia-173-xx-utils-173.14.25-1). Whenever I do Ctrl+Alt+Fn, the screen goes black with no terminal prompt. Then the only thing to do is Ctrl+Alt+F8 (F8 instead of F7, as it used to be) to go back to the X11 session.
This happens also if I logout from KDE and select "Console login" from within the KDM menu: the screen just goes black (after flickering a bit): in this case the only solution is to wait for KDM to kick in and display the (GUI) login screen.
An other thing I discovered is that, when I shutdown/restart the computer and the X11 session is terminated, the screen goes back to terminal mode but the display (and all those messages about services going down) is dimmed down.
The temporary solution for me is to go back to the previous version: nvidia-173xx-173.14.22-4 and nvidia-173-xx-utils-173.14.22-4. Here everything is fine (going to console mode, screen during shutdown, etc.)
Here it is my xorg.conf:
Section "ServerLayout"
Identifier "Layout0"
Screen "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
EndSection
Section "Files"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "Protocol" "Standard"
Option "XkbLayout" "ca"
Option "XkbModel" "microsoftpro"
Option "XkbOptions" "compose:rwin,terminate:ctrl_alt_bksp"
Option "XkbRules" "xfree86"
Option "XkbVariant" "multi"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Acer"
ModelName "X183H"
HorizSync 31.0 - 80.0
VertRefresh 55.0 - 76.0
Modeline "1360x768@60" 84.50 1360 1392 1712 1744 768 783 791 807 -HSync +Vsync
Option "DPMS"
Option "DPI" "96x96"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5200"
Option "RenderAccel" "True"
Option "TripleBuffer" "True"
Option "PixmapCacheSize" "300000"
Option "OnDemandVBlankinterrupts" "True"
Option "IgnoreEDID" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "ConnectToAcpid" "False"
SubSection "Display"
Depth 24
Modes "1360x768@60"
EndSubSection
EndSection
And here you have my kdmrc (in case it is of any help):
[General]
ConfigVersion=2.4
ConsoleTTYs=tty1,tty2,tty3,tty4,tty5,tty6
PidFile=/var/run/kdm.pid
ReserveServers=:1,:2,:3
ServerVTs=-7
StaticServers=:0
[Shutdown]
BootManager=None
HaltCmd=/sbin/halt
RebootCmd=/sbin/reboot
[X-*-Core]
AllowNullPasswd=false
AllowRootLogin=false
AllowShutdown=Root
AutoReLogin=false
ClientLogFile=.xsession-errors-%d
Reset=/usr/share/config/kdm/Xreset
Session=/usr/share/config/kdm/Xsession
SessionsDirs=/usr/share/config/kdm/sessions,/usr/share/apps/kdm/sessions
Setup=/usr/share/config/kdm/Xsetup
Startup=/usr/share/config/kdm/Xstartup
[X-*-Greeter]
AntiAliasing=false
ColorScheme=Oxygen
FaceSource=AdminOnly
FailFont=Sans Serif,10,-1,5,75,0,0,0,0,0
ForgingSeed=1250611569
GUIStyle=Oxygen
GreetFont=Serif,20,-1,5,50,0,0,0,0,0
GreetString=Welcome to %s at %n
GreeterPos=50,50
HiddenUsers=
Language=en_US
LogoArea=Logo
LogoPixmap=/usr/share/apps/kdm/pics/kdelogo.png
MaxShowUID=65000
MinShowUID=500
Preloader=/usr/bin/preloadkde
SelectedUsers=
ShowUsers=NotHidden
SortUsers=true
StdFont=Sans Serif,10,-1,5,50,0,0,0,0,0
Theme=/usr/share/apps/kdm/themes/oxygen-air
UseBackground=true
UseTheme=true
UserCompletion=false
UserList=true
[X-:*-Core]
AllowNullPasswd=true
AllowShutdown=All
NoPassEnable=false
NoPassUsers=
ServerArgsLocal=-nolisten tcp
ServerCmd=/usr/bin/X -br -novtswitch -quiet
TerminateServer=true
[X-:*-Greeter]
AllowClose=false
DefaultUser=sergio
FocusPasswd=true
LoginMode=DefaultLocal
PreselectUser=Previous
[X-:0-Core]
AutoLoginEnable=true
AutoLoginLocked=false
AutoLoginUser=sergio
ClientLogFile=.xsession-errors
[Xdmcp]
Enable=false
Willing=/usr/share/config/kdm/Xwilling
I wasn't able to find any relevant messages in Xorg.log. Another piece of information that may be relevant: the framebuffer resolution is set to "vga=773" in GRUB (which, I think, automatically disables KMS).
I'd rather be able to upgrade my nvidia driver in the future. Have anyone experienced the same problem? Is there any workaround it?
Thank you very much.
[Edit] I forgot: I am on i686, the monitor is an LCD widescreen and the nvidia card is an old one: FX 5200 [/Edit]
Last edited by TioDuke (2010-02-23 15:22:46)Hey, I can confirm this, albeit with a different driver.
I have upgraded nvidia drivers from 190.56 to 195.36 and I can't switch back into console once X is started. The boot output is printed correctly though.
There is also another issue: If I don't set vga= in the boot options, my boot output hangs at "Waiting for udev uevents to be processed [busy]" (see: http://bbs.archlinux.org/viewtopic.php?id=92189).
.After a while X will start, even without vga= parameter.
The problem definitely doesn't exist with 190.56...
Maybe time for a bug report to NVIDIA?
Problem also stayed even if I exchanged vesafb for uvesafb.
Cheers
Bastian -
Firefox wont start or load but when I press ctl, alt, delete I see it running?
I upgraded Firefox. I worked for one night, the next night When I tried to open it it didnt work. I press ctl alt delete and noticed that it was running in the background but no window... IE and Chrome works fine... I do have internet.
I ran virus scans with no problems what so ever. Ran malwarebites and no issues. I have the windows firefall and disabaled it to see if maybe thats the problem, I also checked to see if Firefox had permission to pass the firewall and those were no issues.
Any Ideas.. please help.Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
See also:
* http://kb.mozillazine.org/Browser_will_not_start_up
* http://kb.mozillazine.org/Firefox_hangs -
[SOLVED] Xorg 1.9 + qt 4.7 + nvidia + xinerama = Xorg segfault
Hi everyone,
I'm experiencing a perfectly reproducible (even with a completely fresh Arch install) Xorg segfault with a certain constellation.
When using the latest binary nvidia drivers (works with the 260 beta also), dragging the mouse pointer within a qt window (vlc, smplayer, skype, qtconfig) crashes Xorg with a segfault when using a Xinerama configuration. Twinview or single screen works fine however.
Xinerama configuration (crashing): http://pastebin.com/3VdVZqkU
Twinview configuration (works): http://pastebin.com/QjL4Nibg
Xorg log when crashing: http://pastebin.com/qby9uSxN
Can anyone confirm this?
Ochi
Last edited by Ochi (2010-11-15 14:40:33)Just to do some more analysis on this, I tried to compare the sources between the old working xorg-server that Arch packaged (version 1.8.1.902, found at http://www.x.org/releases/individual/xserver/ and the latest 1.9 xorg release that Arch uses (version 1.9.0, found at the same aforementioned URL).
In version 1.8.1.902, the file Xext/panoramiXprocs.c has this version of the critical if-statement that Ochi originally mentioned:
if((pDst == WindowTable[0]) ||
(pDst->drawable.id == savedScreenInfo[0].wid))
rep.dstX += panoramiXdataPtr[0].x;
rep.dstY += panoramiXdataPtr[0].y;
Anyway, I got the git repo to see which commit decided to change pDst to pWin in that second OR condition.
git clone git://anongit.freedesktop.org/xorg/xserver
git log -p Xext/panoramiXprocs.c
And found this commit: 80b5d3a3264d2c5167e5ac85a3b04af0f89cece1 which did the change. You can use
git show 80b5d3a3264d2c5167e5ac85a3b04af0f89cece1
to see the commit's full diff. That commit was a big commit that changed lots of things in many files. Here is the portion that concerns our discussion (see the very bottom part)):
diff --git a/Xext/panoramiXprocs.c b/Xext/panoramiXprocs.c
index 8752ca5..08ea3ec 100644
--- a/Xext/panoramiXprocs.c
+++ b/Xext/panoramiXprocs.c
@@ -130,7 +130,7 @@ int PanoramiXCreateWindow(ClientPtr client)
orig_x = stuff->x;
orig_y = stuff->y;
parentIsRoot = (stuff->parent == WindowTable[0]->drawable.id) ||
- (stuff->parent == savedScreenInfo[0].wid);
+ (stuff->parent == screenInfo.screens[0]->screensaver.wid);
FOR_NSCREENS_BACKWARD(j) {
stuff->wid = newWin->info[j].id;
stuff->parent = parent->info[j].id;
@@ -329,7 +329,7 @@ int PanoramiXReparentWindow(ClientPtr client)
x = stuff->x;
y = stuff->y;
parentIsRoot = (stuff->parent == WindowTable[0]->drawable.id) ||
- (stuff->parent == savedScreenInfo[0].wid);
+ (stuff->parent == screenInfo.screens[0]->screensaver.wid);
FOR_NSCREENS_BACKWARD(j) {
stuff->window = win->info[j].id;
stuff->parent = parent->info[j].id;
@@ -476,7 +476,7 @@ int PanoramiXConfigureWindow(ClientPtr client)
if(pWin->parent && ((pWin->parent == WindowTable[0]) ||
- (pWin->parent->drawable.id == savedScreenInfo[0].wid)))
+ (pWin->parent->drawable.id == screenInfo.screens[0]->screensaver.wid)))
if ((Mask)stuff->mask & CWX) {
x_offset = 0;
@@ -563,7 +563,7 @@ int PanoramiXGetGeometry(ClientPtr client)
rep.x = pWin->origin.x - wBorderWidth (pWin);
rep.y = pWin->origin.y - wBorderWidth (pWin);
if((pWin->parent == WindowTable[0]) ||
- (pWin->parent->drawable.id == savedScreenInfo[0].wid))
+ (pWin->parent->drawable.id == screenInfo.screens[0]->screensaver.wid))
rep.x += panoramiXdataPtr[0].x;
rep.y += panoramiXdataPtr[0].y;
@@ -597,7 +597,7 @@ int PanoramiXTranslateCoords(ClientPtr client)
rep.child = None;
if((pWin == WindowTable[0]) ||
- (pWin->drawable.id == savedScreenInfo[0].wid))
+ (pWin->drawable.id == screenInfo.screens[0]->screensaver.wid))
x = stuff->srcX - panoramiXdataPtr[0].x;
y = stuff->srcY - panoramiXdataPtr[0].y;
@@ -635,7 +635,7 @@ int PanoramiXTranslateCoords(ClientPtr client)
rep.dstX = x - pDst->drawable.x;
rep.dstY = y - pDst->drawable.y;
if((pDst == WindowTable[0]) ||
- (pDst->drawable.id == savedScreenInfo[0].wid))
+ (pWin->drawable.id == screenInfo.screens[0]->screensaver.wid))
rep.dstX += panoramiXdataPtr[0].x;
rep.dstY += panoramiXdataPtr[0].y;
Git tells me all the contact info I need:
commit 80b5d3a3264d2c5167e5ac85a3b04af0f89cece1
Author: Jamey Sharp <[email protected]>
Date: Fri May 21 23:13:51 2010 -0700
Move each screen's screensaver data into ScreenRec.
Most references to the savedScreenInfo array already had the
corresponding screen pointer handy, which meant they usually looked like
"savedScreenInfo[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
Signed-off-by: Jamey Sharp <[email protected]>
Reviewed-by: Tiago Vignatti <[email protected]>
Tested-by: Tiago Vignatti <[email protected]> (i686 GNU/Linux)
So I will send the developers an email and simply ask him if he meant to change that pDst to pWin in Xext/panoramiX.c, or if it was a copy/paste error (seems like it is). I'll report back here afterwards.
Last edited by listdata (2010-10-17 21:23:09) -
New T400 ctl-alt-del not working
I just a new T400. It has happened twice that when I try to enter back from blocked screen/standby using the ctl-alt-del it does not work (as if the keybord was desconected... nothing happens). I have to force power off and then it works.
If I activate this, will the user receive a popup when deploying some apps
(bundles) ?
"Shaun Pond" a crit dans le message de groupe de discussion :
[email protected]..
Normand,
the one shown in TID 7006211 and the docs
http://www.novell.com/documentation/...b.html#brybx5o
Shaun Pond -
What keys are used to open windows besides CTL-Alt-Delete?
What keys are used to open windows besides Ctl-Alt-Delete?
Open what windows? what is a window? There is no Alt key.
Describe what you are trying to do. -
Bootmgr compresses, ctl+alt+delete to restart
I get the above error when I try to restart my computer. I installed an AVG product that compressed a bunch of files.
I have followed the suggestion online as follows
inserted windows disc
ctl alt delete
press the blue button
press f12
selected the top option, 2: atapi cdo: hl-dt-st dvdram gsa-u20n-(s2)
Then it does to bootmgr is compressed error
sometimes it give a press f1 for set up message. I have no idea where to go from there.
Does anyone have any advice? It is entirely likely that I have the wrong windows CD.
I have ltd experience with software, so the more simple the instructions the better.Hello,
I have been reading up on this error, and found two possible solutions:
Boot the computer from a Windows 7 installation disc, and select the "Startup Computer" from System Recovery Options to automatically fix the compressed files.
Remove the hard disk drive from the ThinkPad and connect it to another computer running Windows 7 as a secondary hard disk drive. It could be connected via a USB to SATA cable, plugged into one of the internal SATA connectors, and so forth—the type of connection does not matter as long as it's not the primary boot drive. Boot the system as you normally would, open My Computer, right-click on the drive, select Properties from the popup context menu, and on the General tab, uncheck the "Compress this drive to save disk space" option. It may take a while to run, especially over a USB connection.
Hopefully, ione of those will get you up and running without having to reformat the hard disk drive.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Some wine applications crash my xorg.. Here is the log:
[ 474.208]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 474.209] X Protocol Version 11, Revision 0
[ 474.209] Build Operating System: Linux 3.8.7-1-ARCH x86_64
[ 474.209] Current Operating System: Linux pendulum 3.9.7-1-ARCH #1 SMP PREEMPT Thu Jun 20 22:45:32 CEST 2013 x86_64
[ 474.209] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD5000AADS-00S9B0_WD-WCAV91496126-part2 zfs=maindisk/root quiet ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 474.209] Build Date: 17 April 2013 02:37:06PM
[ 474.209]
[ 474.209] Current version of pixman: 0.30.0
[ 474.209] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 474.209] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 474.210] (==) Log file: "/var/log/Xorg.2.log", Time: Sun Jun 23 15:24:17 2013
[ 474.210] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 474.211] (==) No Layout section. Using the first Screen section.
[ 474.211] (==) No screen section available. Using defaults.
[ 474.211] (**) |-->Screen "Default Screen Section" (0)
[ 474.211] (**) | |-->Monitor "<default monitor>"
[ 474.211] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 474.211] (==) Automatically adding devices
[ 474.211] (==) Automatically enabling devices
[ 474.211] (==) Automatically adding GPU devices
[ 474.211] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 474.211] Entry deleted from font path.
[ 474.211] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 474.211] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 474.211] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 474.211] (II) Loader magic: 0x7fcc20
[ 474.211] (II) Module ABI versions:
[ 474.212] X.Org ANSI C Emulation: 0.4
[ 474.212] X.Org Video Driver: 14.1
[ 474.212] X.Org XInput driver : 19.1
[ 474.212] X.Org Server Extension : 7.0
[ 474.212] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 474.212] setversion 1.4 failed
[ 474.213] (--) PCI:*(0:1:0:0) 10de:0615:19da:7103 rev 162, Mem @ 0xe6000000/16777216, 0xd0000000/268435456, 0xe4000000/33554432, I/O @ 0x0000b000/128, BIOS @ 0x????????/131072
[ 474.213] Initializing built-in extension Generic Event Extension
[ 474.214] Initializing built-in extension SHAPE
[ 474.214] Initializing built-in extension MIT-SHM
[ 474.214] Initializing built-in extension XInputExtension
[ 474.214] Initializing built-in extension XTEST
[ 474.214] Initializing built-in extension BIG-REQUESTS
[ 474.214] Initializing built-in extension SYNC
[ 474.214] Initializing built-in extension XKEYBOARD
[ 474.214] Initializing built-in extension XC-MISC
[ 474.214] Initializing built-in extension SECURITY
[ 474.214] Initializing built-in extension XINERAMA
[ 474.214] Initializing built-in extension XFIXES
[ 474.214] Initializing built-in extension RENDER
[ 474.214] Initializing built-in extension RANDR
[ 474.214] Initializing built-in extension COMPOSITE
[ 474.214] Initializing built-in extension DAMAGE
[ 474.214] Initializing built-in extension MIT-SCREEN-SAVER
[ 474.214] Initializing built-in extension DOUBLE-BUFFER
[ 474.215] Initializing built-in extension RECORD
[ 474.215] Initializing built-in extension DPMS
[ 474.215] Initializing built-in extension X-Resource
[ 474.215] Initializing built-in extension XVideo
[ 474.215] Initializing built-in extension XVideo-MotionCompensation
[ 474.215] Initializing built-in extension XFree86-VidModeExtension
[ 474.215] Initializing built-in extension XFree86-DGA
[ 474.215] Initializing built-in extension XFree86-DRI
[ 474.215] Initializing built-in extension DRI2
[ 474.215] (II) LoadModule: "glx"
[ 474.215] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 474.252] (II) Module glx: vendor="NVIDIA Corporation"
[ 474.252] compiled for 4.0.2, module version = 1.0.0
[ 474.252] Module class: X.Org Server Extension
[ 474.252] (II) NVIDIA GLX Module 319.23 Thu May 16 19:23:10 PDT 2013
[ 474.252] Loading extension GLX
[ 474.252] (==) Matched nouveau as autoconfigured driver 0
[ 474.252] (==) Matched nvidia as autoconfigured driver 1
[ 474.253] (==) Matched nv as autoconfigured driver 2
[ 474.253] (==) Matched vesa as autoconfigured driver 3
[ 474.253] (==) Matched modesetting as autoconfigured driver 4
[ 474.253] (==) Matched fbdev as autoconfigured driver 5
[ 474.253] (==) Assigned the driver to the xf86ConfigLayout
[ 474.253] (II) LoadModule: "nouveau"
[ 474.254] (WW) Warning, couldn't open module nouveau
[ 474.254] (II) UnloadModule: "nouveau"
[ 474.254] (II) Unloading nouveau
[ 474.254] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 474.254] (II) LoadModule: "nvidia"
[ 474.254] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 474.255] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 474.255] compiled for 4.0.2, module version = 1.0.0
[ 474.255] Module class: X.Org Video Driver
[ 474.255] (II) LoadModule: "nv"
[ 474.255] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[ 474.255] (II) Module nv: vendor="X.Org Foundation"
[ 474.255] compiled for 1.14.0, module version = 2.1.20
[ 474.256] Module class: X.Org Video Driver
[ 474.256] ABI class: X.Org Video Driver, version 14.1
[ 474.256] (II) LoadModule: "vesa"
[ 474.256] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 474.256] (II) Module vesa: vendor="X.Org Foundation"
[ 474.256] compiled for 1.14.0, module version = 2.3.2
[ 474.256] Module class: X.Org Video Driver
[ 474.256] ABI class: X.Org Video Driver, version 14.1
[ 474.256] (II) LoadModule: "modesetting"
[ 474.257] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 474.257] (II) Module modesetting: vendor="X.Org Foundation"
[ 474.257] compiled for 1.14.1, module version = 0.8.0
[ 474.257] Module class: X.Org Video Driver
[ 474.257] ABI class: X.Org Video Driver, version 14.1
[ 474.257] (II) LoadModule: "fbdev"
[ 474.257] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 474.257] (II) Module fbdev: vendor="X.Org Foundation"
[ 474.258] compiled for 1.14.0, module version = 0.4.3
[ 474.258] Module class: X.Org Video Driver
[ 474.258] ABI class: X.Org Video Driver, version 14.1
[ 474.258] (II) NVIDIA dlloader X Driver 319.23 Thu May 16 19:02:20 PDT 2013
[ 474.258] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 474.258] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
GeForce GTS 360M, Quadro FX 1800M
[ 474.299] (II) VESA: driver for VESA chipsets: vesa
[ 474.299] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 474.299] (II) FBDEV: driver for framebuffer: fbdev
[ 474.300] (--) using VT number 2
[ 474.747] (II) Loading sub module "fb"
[ 474.747] (II) LoadModule: "fb"
[ 474.747] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 474.747] (II) Module fb: vendor="X.Org Foundation"
[ 474.747] compiled for 1.14.1, module version = 1.0.0
[ 474.747] ABI class: X.Org ANSI C Emulation, version 0.4
[ 474.747] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 474.747] (II) Loading sub module "wfb"
[ 474.747] (II) LoadModule: "wfb"
[ 474.747] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 474.748] (II) Module wfb: vendor="X.Org Foundation"
[ 474.748] compiled for 1.14.1, module version = 1.0.0
[ 474.748] ABI class: X.Org ANSI C Emulation, version 0.4
[ 474.748] (II) Loading sub module "shadow"
[ 474.748] (II) LoadModule: "shadow"
[ 474.748] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 474.748] (II) Module shadow: vendor="X.Org Foundation"
[ 474.748] compiled for 1.14.1, module version = 1.1.0
[ 474.748] ABI class: X.Org ANSI C Emulation, version 0.4
[ 474.748] (II) Loading sub module "ramdac"
[ 474.748] (II) LoadModule: "ramdac"
[ 474.748] (II) Module "ramdac" already built-in
[ 474.749] (WW) Falling back to old probe method for vesa
[ 474.749] (WW) Falling back to old probe method for modesetting
[ 474.749] (WW) Falling back to old probe method for fbdev
[ 474.749] (II) Loading sub module "fbdevhw"
[ 474.749] (II) LoadModule: "fbdevhw"
[ 474.749] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 474.749] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 474.749] compiled for 1.14.1, module version = 0.0.2
[ 474.749] ABI class: X.Org Video Driver, version 14.1
[ 474.749] (EE) open /dev/fb0: No such file or directory
[ 474.749] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 474.749] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 474.749] (==) NVIDIA(0): RGB weight 888
[ 474.749] (==) NVIDIA(0): Default visual is TrueColor
[ 474.749] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 474.750] (**) NVIDIA(0): Enabling 2D acceleration
[ 474.948] (II) NVIDIA(GPU-0): Display (Acer S240HL (DFP-0)) does not support NVIDIA 3D
[ 474.948] (II) NVIDIA(GPU-0): Vision stereo.
[ 474.949] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 250 (G92) at PCI:1:0:0 (GPU-0)
[ 474.949] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 474.949] (--) NVIDIA(0): VideoBIOS: 62.92.7e.00.00
[ 474.949] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 474.955] (--) NVIDIA(0): Valid display device(s) on GeForce GTS 250 at PCI:1:0:0
[ 474.955] (--) NVIDIA(0): CRT-0
[ 474.955] (--) NVIDIA(0): CRT-1
[ 474.955] (--) NVIDIA(0): TV-0
[ 474.955] (--) NVIDIA(0): Acer S240HL (DFP-0) (boot, connected)
[ 474.955] (--) NVIDIA(0): DFP-1
[ 474.955] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 474.955] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 474.955] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 474.955] (--) NVIDIA(0): Acer S240HL (DFP-0): 330.0 MHz maximum pixel clock
[ 474.955] (--) NVIDIA(0): Acer S240HL (DFP-0): Internal Dual Link TMDS
[ 474.955] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
[ 474.955] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 474.955] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 474.955] (**) NVIDIA(0): device Acer S240HL (DFP-0) (Using EDID frequencies has
[ 474.955] (**) NVIDIA(0): been enabled on all display devices.)
[ 474.957] (==) NVIDIA(0):
[ 474.957] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 474.957] (==) NVIDIA(0): will be used as the requested mode.
[ 474.957] (==) NVIDIA(0):
[ 474.957] (II) NVIDIA(0): Validated MetaModes:
[ 474.957] (II) NVIDIA(0): "DFP-0:nvidia-auto-select{}"
[ 474.957] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 474.987] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 474.987] (--) NVIDIA(0): option
[ 474.987] (II) UnloadModule: "nv"
[ 474.988] (II) Unloading nv
[ 474.988] (II) UnloadModule: "vesa"
[ 474.988] (II) Unloading vesa
[ 474.988] (II) UnloadModule: "modesetting"
[ 474.988] (II) Unloading modesetting
[ 474.988] (II) UnloadModule: "fbdev"
[ 474.988] (II) Unloading fbdev
[ 474.988] (II) UnloadSubModule: "fbdevhw"
[ 474.988] (II) Unloading fbdevhw
[ 474.988] (--) Depth 24 pixmap format is 32 bpp
[ 474.988] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 474.991] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 474.991] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 474.991] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 474.991] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 474.991] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 474.991] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 474.991] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 474.991] (II) NVIDIA(0): Config Options in the README.
[ 474.996] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select{}"
[ 475.029] Loading extension NV-GLX
[ 475.039] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 475.041] (==) NVIDIA(0): Backing store disabled
[ 475.041] (==) NVIDIA(0): Silken mouse enabled
[ 475.042] (==) NVIDIA(0): DPMS enabled
[ 475.042] Loading extension NV-CONTROL
[ 475.042] Loading extension XINERAMA
[ 475.042] (II) Loading sub module "dri2"
[ 475.042] (II) LoadModule: "dri2"
[ 475.042] (II) Module "dri2" already built-in
[ 475.042] (II) NVIDIA(0): [DRI2] Setup complete
[ 475.042] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 475.042] (--) RandR disabled
[ 475.046] (II) Initializing extension GLX
[ 475.195] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 475.195] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 475.195] (II) LoadModule: "evdev"
[ 475.196] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 475.196] (II) Module evdev: vendor="X.Org Foundation"
[ 475.196] compiled for 1.14.0, module version = 2.8.0
[ 475.196] Module class: X.Org XInput Driver
[ 475.196] ABI class: X.Org XInput driver, version 19.1
[ 475.196] (II) Using input driver 'evdev' for 'Power Button'
[ 475.196] (**) Power Button: always reports core events
[ 475.196] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 475.196] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 475.196] (--) evdev: Power Button: Found keys
[ 475.196] (II) evdev: Power Button: Configuring as keyboard
[ 475.196] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 475.196] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 475.196] (**) Option "xkb_rules" "evdev"
[ 475.196] (**) Option "xkb_model" "evdev"
[ 475.196] (**) Option "xkb_layout" "us"
[ 475.217] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 475.217] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 475.217] (II) Using input driver 'evdev' for 'Power Button'
[ 475.217] (**) Power Button: always reports core events
[ 475.217] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 475.217] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 475.217] (--) evdev: Power Button: Found keys
[ 475.218] (II) evdev: Power Button: Configuring as keyboard
[ 475.218] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[ 475.218] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 475.218] (**) Option "xkb_rules" "evdev"
[ 475.218] (**) Option "xkb_model" "evdev"
[ 475.218] (**) Option "xkb_layout" "us"
[ 475.218] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 475.218] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 475.218] setversion 1.4 failed
[ 475.218] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event1)
[ 475.219] (**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
[ 475.219] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[ 475.219] (**) A4TECH USB Device: always reports core events
[ 475.219] (**) evdev: A4TECH USB Device: Device: "/dev/input/event1"
[ 475.219] (II) evdev: A4TECH USB Device: Using mtdev for this device
[ 475.219] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x9090
[ 475.219] (--) evdev: A4TECH USB Device: Found 1 mouse buttons
[ 475.219] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[ 475.219] (--) evdev: A4TECH USB Device: Found relative axes
[ 475.219] (--) evdev: A4TECH USB Device: Found absolute axes
[ 475.219] (--) evdev: A4TECH USB Device: Found absolute multitouch axes
[ 475.219] (--) evdev: A4TECH USB Device: Found x and y absolute axes
[ 475.219] (--) evdev: A4TECH USB Device: Found keys
[ 475.219] (II) evdev: A4TECH USB Device: Forcing relative x/y axes to exist.
[ 475.219] (II) evdev: A4TECH USB Device: Configuring as mouse
[ 475.219] (II) evdev: A4TECH USB Device: Configuring as keyboard
[ 475.219] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[ 475.219] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[ 475.219] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 475.219] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input1/event1"
[ 475.219] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD, id 8)
[ 475.219] (**) Option "xkb_rules" "evdev"
[ 475.219] (**) Option "xkb_model" "evdev"
[ 475.220] (**) Option "xkb_layout" "us"
[ 475.220] (II) evdev: A4TECH USB Device: initialized for relative axes.
[ 475.220] (WW) evdev: A4TECH USB Device: ignoring absolute axes.
[ 475.220] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[ 475.220] (**) A4TECH USB Device: (accel) acceleration profile 0
[ 475.220] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[ 475.220] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[ 475.220] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
[ 475.220] (II) No input driver specified, ignoring this device.
[ 475.230] (II) This device may have been added with another device file.
[ 475.230] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event2)
[ 475.230] (**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
[ 475.230] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[ 475.230] (**) A4TECH USB Device: always reports core events
[ 475.230] (**) evdev: A4TECH USB Device: Device: "/dev/input/event2"
[ 475.230] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x9090
[ 475.231] (--) evdev: A4TECH USB Device: Found 20 mouse buttons
[ 475.231] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[ 475.231] (--) evdev: A4TECH USB Device: Found relative axes
[ 475.231] (--) evdev: A4TECH USB Device: Found x and y relative axes
[ 475.231] (II) evdev: A4TECH USB Device: Configuring as mouse
[ 475.231] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[ 475.231] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[ 475.231] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 475.231] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.1/input/input2/event2"
[ 475.231] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 9)
[ 475.231] (II) evdev: A4TECH USB Device: initialized for relative axes.
[ 475.231] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[ 475.231] (**) A4TECH USB Device: (accel) acceleration profile 0
[ 475.231] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[ 475.231] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[ 475.231] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse0)
[ 475.231] (II) No input driver specified, ignoring this device.
[ 475.231] (II) This device may have been added with another device file.
[ 475.232] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 475.232] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 475.232] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 475.232] (**) AT Translated Set 2 keyboard: always reports core events
[ 475.232] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 475.232] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 475.232] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 475.232] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 475.232] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 475.232] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 475.232] (**) Option "xkb_rules" "evdev"
[ 475.232] (**) Option "xkb_model" "evdev"
[ 475.232] (**) Option "xkb_layout" "us"
[ 480.188] (EE)
[ 480.189] (EE) Backtrace:
[ 480.189] (EE) 0: X (xorg_backtrace+0x3d) [0x57f48d]
[ 480.189] (EE) 1: X (0x400000+0x1831e9) [0x5831e9]
[ 480.189] (EE) 2: /usr/lib/libpthread.so.0 (0x7f10e9de6000+0xf0e0) [0x7f10e9df50e0]
[ 480.189] (EE) 3: ?? [0x4106cb15]
[ 480.189] (EE)
[ 480.189] (EE) Segmentation fault at address 0x0
[ 480.189]
Fatal server error:
[ 480.189] Caught signal 11 (Segmentation fault). Server aborting
[ 480.189]
[ 480.189] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 480.189] (EE) Please also check the log file at "/var/log/Xorg.2.log" for additional information.
[ 480.189] (EE)
[ 480.526] Server terminated with error (1). Closing log file.
My system is fully updated and apparently video is fine:
$ sudo pacman -Syyuw
:: Synchronizing package databases...
:: Starting full system upgrade...
there is nothing to do
$ glxinfo |grep '^Open\|^dir'
direct rendering: Yes
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GTS 250/PCIe/SSE2
OpenGL core profile version string: 3.3.0 NVIDIA 319.23
OpenGL core profile shading language version string: 3.30 NVIDIA via Cg compiler
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 3.3.0 NVIDIA 319.23
OpenGL shading language version string: 3.30 NVIDIA via Cg compiler
OpenGL context flags: (none)
OpenGL profile mask: (none)
OpenGL extensions:
$
I have no idea of what to try... any insight?
Solved, it was really stupid. For some reason my Multilib repo got disable in the pacman config. So the 32bit nvidia drivers were old...
Last edited by ezzetabi (2013-06-23 14:10:36)Yeah, sorry I didn't notice this post sooner, or I could have saved you some trouble shooting.
After testing and discussion on NVIDIA forums with someone else having the same problem, we realized that it is apparently a problem with any Xorg 1.7 release using Xinerama with a monitor positioned Left of another display.
The person I was talking to said he bugged it, and rearranged his monitors right of. I downgraded to xorg 1.6 and haven't given it too much though since. I should probably follow up on that and submit a bug to xorg or something... or you are welcome to!
Works great with Xinerama turned off, which is actually a fine option for me since I don't tend to move windows between displays, except I am using Xinerama to work around an xmonad bug in handling multiple non-Xinerama displays. I would have never caught it if I hadn't tried turning Xin on to fix the xmonad issue right before the 1.7 upgrade and gotten curious why my setup started going crazy (since I have a monitor with two monitors to the left of it)..
One thing that also works is making your left most monitor screen 0 and setting the other two monitors to be RightOf it, or at least that worked for me. Unfortunately, my left most monitor is a 46 inch tv that is often turned off or on a different input, so I can't really have it being screen 0. -
Crystal Report Windows Forms Viewer Error in 1 Workstation after upgrade of PL
Hi all,
We just upgraded SAP from 8.82 PL02 to 8.82 PL15.
Afterwards, in just 1 workstation, Crystal Reports layouts have Crystal Report Windows Forms Viewer error I attach.
Before the upgrade this error did not happen.
No permissions or authorizations were changed in the workstation.
The Crystal Reports layouts remain working fine in server and in the other workstations.
In the workstation following are installed:
- Operating System Windows 7;
- Microsoft .NET Framework 4.5;
- SAP Crystal Reports runtime engine for. NET Framework;
- Crystal Report 2008 Runtime SP6;
- Microsoft SQL Server 2008 R2 Native Client.
All, but the operating system, are equal to the other workstations.
User has edit access to SAP folders, temp and access to the attach path.
We already uninstalled SAP client and client agent and re-installed it but with no avail.
Can anyone help me?
Thanks in advance.
Best regards,
Pedro MarianoHi San Xu,
Thank you for your input.
However I'm facing problem with each software is suitable.
I installed SAP Crystal Reports for SAP Business One (CR 2011 V14.0.4.738), but with no avail.
Thanks in advance.
Best regards,
Pedro Mariano -
Viewing print thumbnail only works after a TAB in adobe reader X
Hello,
Viewing print thumbnail only works after a TAB in adobe reader x.
In adobe reader 9 when you go to a specified page (the red circle in the screenshot), the example on the right site directly go´s to that page,
In adobe reader x when you go to a specified page nothing happend in the example, when you then use the TAB then de example wil go to the specified page.
Is this a incident in Adobe Reader X ?
On myPDF files have to be specially enabled for you to save the contents. It appears the old version of these files had this capability, but the new version does not. Without Acrobat you will be unable to save the files. If these are truly government files, you can try going to the government's website and see if you can download a copy that will allow you to save the form field data.
-
I was able to view pictures in my email before I upgraded to iOS 7. I have allow remote pictures turned on in my settings. I loved Apple until this last upgrade. It used to be an intuitively designed product. I hate it now. If they don't make it easier for older users to use again, this will be the last Apple product I every purchase.
Welcome to AD!
I have a regular post for the top 3 or 4 fixes for that 9808 error. Obviously you are going to skip #1, since you've already tried it. Let me know how you get on with the next 2.
The top 3 fixes to itunes error 9808 seem to be
1) Go to Start > Control Panel > Internet Options > Advanced, make sure that SSL 3.0 is checked and TLS 1.0 is checked. Also under Security make sure that the “Check for server certificate revocation (requires restart)” is unchecked. Then click ok and fire up iTunes.
2) The culprit was Norton. The users are set up as Admin and Standard. I have Parental Controls turned on in both Vista as well as Norton. Admin users had no problems connecting to iTunes. Standard users would get the error. I had to go to Norton’s Personal Firewall and add the program “iTunes Helper.exe” and set the option to “Allowed” (”iTunes.exe should already be in the Allowed category.) in order for the standard users to be able to connect.
3) close iTunes if you have it open right now. Then go to C:/Documents and Settings/username/Local Settings/Application Data/Apple Computer/iTunes. Delete or cut the preferences.xml file which contains your iTunes preferences. Then go to C:/Documents and Settings/username/Application Data/Apple Computer/iTunes and delete or move the preferences.xml file. For Mac users, there is only one file you must delete or move a to a new location and is located at User > Library > Preferences > com.apple.itunes.plist. Restart iTunes and it will recreate those two (or one) files with the default settings. Feel free to set your preferences back to what they were and then connect to the iTunes store and enjoy!
And #4, see if you can get into the iTS from a different windows admin account on the same PC. -
Firefox 3.6.3 segfaults between 10 seconds and 1 minute after starting
Yesterday, some of my addons updated (I can't remember which). Everything was fine until about an hour ago firefox segfaulted (with three windows and ~90 tabs it does this occasionally).
Now, firefox segfaults between 10 seconds and 1 minute after starting to load. Even with no restored session - just the moz homepage as the single tab, even in safemode.
I'm using firefox 3.6.3 on an AMD-64 machine running Kubuntu Jaunty (9.04) KDE3 version.
== Troubleshooting information ==
I don't know how to find all but includes past modern theme, googlebar, en.gb dictionary (recently installed), session manager, tab mix plus, character identifier, flash and realplayer plugins, super drag and go (I think), add bookmark here (possibly)Going back to a profile backup from two days ago has seemingly worked, implying that the problem was the new en-GB language pack so I'll have find out where to report a bug on that.
This can be marked as solved now by anyone who knows how. -
Can't view pdf files using safari after upgrading 10.5.8 to 10.6.5
I noticed that right after I upgraded from Leopard 10.5.8 to Snow Leopard 10.6.5, I no longer could view any pdf's I would click on unless I used "control click" option to download the file/pdf. Before upgrading all I had to do was click on a pdf link and it opened up automatically in a new window. Now all I get a black screen unless I "control click"
I am thankful that I saw in the discussion area that I at least have a way to view it but do not understand why upgrading to 10.6.5 changed the way I use to be able to open/view pdf files.
ThanksHi keyag
I suspect you've an adobe pdf viewer plugin that requires safari to run in 32 bit mode. Either remove it from HD/Library/Internet Plug-Ins/ & restart Safari; or select Safari in Applications, do a File-Get Info - and check the 32 bit box, again restarting Safari.
... do not understand why upgrading to 10.6.5 changed ...
probably because 10.6.x runs Safari as a 64 bit process by default, and the plugin won't work that way. Maybe there's an update for it (assuming the plugin guess is correct ) -
The "File Edit View Window Help" menu disappears after opening Adobe Acrobat X Standard
After installing Adobe Acrobat X Standard, when I run the program the "File Edit View Window Help" menu is visible for only a brief second then disappears. I tried to press F11 or other functions keys to bring it back. I also installed Adobe Acrobat X Pro which I also have a license for and it would do the exact same thing. Reinstalling the programs did not seem to resolve the problem. Is there an issue inside the registry?
Thank you for your comment. However, F9 does not seem to work.
When I press F9, the menu bar appears but the words "File Edit View Window Help" are still missing.
When I press F9 again the menu bar will close.
This is a screen capture before the words "File Edit View Window Help" disappear. After only about a second they are gone.
Maybe you are looking for
-
Slideshow works in Explorer but not Firefox
http://ggdtest02.businesscatalyst.com/index.html Here is my page, the slideshow works in Explorer but doesn't work in Firefox. Can someone help? Thanks!
-
Colours different on illustrator from photoshop for example white is grey
hi I was wondering if anyone could help me with a illustrator colour problem. I place images from ps into illustrator and they print out darker and more faded for example a image with white in it comes out grey?! does anyone know how to prevent this?
-
How can i get the answers of security question
how can i get the answers of the questions for mt apple id
-
How to make height on the HU mandatory
Dear expert. Do you know is there a way to make the height of each HU to be mandatory in VL01N, or VL02N transaction, when packing the material? The field name is HOEHE. Thank you!
-
Hi everybody. Does anyone know if XML Schema validation of incoming messages will be implemented in upcoming XI patches or full releases? You can do it yourself, of course, in an adapter module or a Java mapping program, but both options seem somewha