Cannot Ctrl+Alt+F1 after nvidia-173xx update

I have recently discovered that I cannot switch into "terminal mode" with the latest nvidia-173xx drivers (nvidia-173xx-173.14.25-1 and nvidia-173-xx-utils-173.14.25-1). Whenever I do Ctrl+Alt+Fn, the screen goes black with no terminal prompt. Then the only thing to do is Ctrl+Alt+F8 (F8 instead of F7, as it used to be) to go back to the X11 session.
This happens also if I logout from KDE and select "Console login" from within the KDM menu: the screen just goes black (after flickering a bit): in this case the only solution is to wait for KDM to kick in and display the (GUI) login screen.
An other thing I discovered is that, when I shutdown/restart the computer and the X11 session is terminated, the screen goes back to terminal mode but the display (and all those messages about services going down) is dimmed down.
The temporary solution for me is to go back to the previous version: nvidia-173xx-173.14.22-4 and nvidia-173-xx-utils-173.14.22-4. Here everything is fine (going to console mode, screen during shutdown, etc.)
Here it is my xorg.conf:
Section "ServerLayout"
Identifier "Layout0"
Screen "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
EndSection
Section "Files"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "Protocol" "Standard"
Option "XkbLayout" "ca"
Option "XkbModel" "microsoftpro"
Option "XkbOptions" "compose:rwin,terminate:ctrl_alt_bksp"
Option "XkbRules" "xfree86"
Option "XkbVariant" "multi"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Acer"
ModelName "X183H"
HorizSync 31.0 - 80.0
VertRefresh 55.0 - 76.0
Modeline "1360x768@60" 84.50 1360 1392 1712 1744 768 783 791 807 -HSync +Vsync
Option "DPMS"
Option "DPI" "96x96"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5200"
Option "RenderAccel" "True"
Option "TripleBuffer" "True"
Option "PixmapCacheSize" "300000"
Option "OnDemandVBlankinterrupts" "True"
Option "IgnoreEDID" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "ConnectToAcpid" "False"
SubSection "Display"
Depth 24
Modes "1360x768@60"
EndSubSection
EndSection
And here you have my kdmrc (in case it is of any help):
[General]
ConfigVersion=2.4
ConsoleTTYs=tty1,tty2,tty3,tty4,tty5,tty6
PidFile=/var/run/kdm.pid
ReserveServers=:1,:2,:3
ServerVTs=-7
StaticServers=:0
[Shutdown]
BootManager=None
HaltCmd=/sbin/halt
RebootCmd=/sbin/reboot
[X-*-Core]
AllowNullPasswd=false
AllowRootLogin=false
AllowShutdown=Root
AutoReLogin=false
ClientLogFile=.xsession-errors-%d
Reset=/usr/share/config/kdm/Xreset
Session=/usr/share/config/kdm/Xsession
SessionsDirs=/usr/share/config/kdm/sessions,/usr/share/apps/kdm/sessions
Setup=/usr/share/config/kdm/Xsetup
Startup=/usr/share/config/kdm/Xstartup
[X-*-Greeter]
AntiAliasing=false
ColorScheme=Oxygen
FaceSource=AdminOnly
FailFont=Sans Serif,10,-1,5,75,0,0,0,0,0
ForgingSeed=1250611569
GUIStyle=Oxygen
GreetFont=Serif,20,-1,5,50,0,0,0,0,0
GreetString=Welcome to %s at %n
GreeterPos=50,50
HiddenUsers=
Language=en_US
LogoArea=Logo
LogoPixmap=/usr/share/apps/kdm/pics/kdelogo.png
MaxShowUID=65000
MinShowUID=500
Preloader=/usr/bin/preloadkde
SelectedUsers=
ShowUsers=NotHidden
SortUsers=true
StdFont=Sans Serif,10,-1,5,50,0,0,0,0,0
Theme=/usr/share/apps/kdm/themes/oxygen-air
UseBackground=true
UseTheme=true
UserCompletion=false
UserList=true
[X-:*-Core]
AllowNullPasswd=true
AllowShutdown=All
NoPassEnable=false
NoPassUsers=
ServerArgsLocal=-nolisten tcp
ServerCmd=/usr/bin/X -br -novtswitch -quiet
TerminateServer=true
[X-:*-Greeter]
AllowClose=false
DefaultUser=sergio
FocusPasswd=true
LoginMode=DefaultLocal
PreselectUser=Previous
[X-:0-Core]
AutoLoginEnable=true
AutoLoginLocked=false
AutoLoginUser=sergio
ClientLogFile=.xsession-errors
[Xdmcp]
Enable=false
Willing=/usr/share/config/kdm/Xwilling
I wasn't able to find any relevant messages in Xorg.log. Another piece of information that may be relevant: the framebuffer resolution is set to "vga=773" in GRUB (which, I think, automatically disables KMS).
I'd rather be able to upgrade my nvidia driver in the future. Have anyone experienced the same problem? Is there any workaround it?
Thank you very much.
[Edit] I forgot: I am on i686, the monitor is an LCD widescreen and the nvidia card is an old one: FX 5200 [/Edit]
Last edited by TioDuke (2010-02-23 15:22:46)

Hey, I can confirm this, albeit with a different driver.
I have upgraded nvidia drivers from 190.56 to 195.36 and I can't switch back into console once X is started. The boot output is printed correctly though.
There is also another issue: If I don't set vga= in the boot options, my boot output hangs at "Waiting for udev uevents to be processed [busy]" (see: http://bbs.archlinux.org/viewtopic.php?id=92189).
.After a while X will start, even without vga= parameter.
The problem definitely doesn't exist with 190.56...
Maybe time for a bug report to NVIDIA?
Problem also stayed even if I exchanged vesafb for uvesafb.
Cheers
Bastian

Similar Messages

Once gdm loads I cannot ctrl+alt+Fx to get a tty

Once gdm loads, I cannot ctrl+alt+Fx to get a tty. I just get a black screen where my logon screen used to be. I dunno what has changed on this system. I installed xfce4 to play with a bit but that is the only recent change. If I boot into mode 3 everything is fine until I load up X via xinitrc. This causes the same behavior (black screen when I hit ctrl+alt+Fx). Thoughts are appreciated!

graysky wrote:I tried both nvidia from [testing] and from [extra] with no change. Any idea which log I can look at? dmesg.log gives nothing; Xorg.log looks just fine.
I meant nouveau :-)
You know that nvidia drivers don't use KMS and there will be a couple seconds black screen before you get to the tty, right?

HT201263 Can anyone help? I cannot activate my iphone after an ios7 update.

Can anyone help? I cannot activate my iphone4 after an ios7 update. I have carried out a recovery-mode restore but when the phone is switched back on I enter the UserID and Password that are verified via itunes and icloud but no joy. It tells me the used ID and password are not correct. This is is second hand phone that I have hand for a year. Apple says that I have to contact the previous owner to get their User Name and Password. This is impossible.They might have even passed away. I can believe Apple would do such a crazy software release. There must be thousands of people in my shoes.

This is the new Activation Lock feature that users have been wanting for years to prevent stolen phones from being restored and used by the thief.
If you cannot get the password to the previous user's AppleID then the phone will be useless to you.

X randomly crashing, cannot ctrl-alt-bksp

The first crash was a couple of months ago, and I will admit I just ignored it, especially since it didn't crash again for about a month. Then I was starting to think I might have a problem and did a bit of research. I thought turning off compositing might be the solution so I did that and it still crashed about a week later. The crashes were so dispersed that I just forgot about them, but I think I have to do something now.
Recently I installed xdm. The problem is, now when X crashes, xdm tries to get X to run again, and it goes into an endless cycle of crashes. Ctrl-Alt-Backspace does not work, Ctrl-Alt-F1 does not bring me into a terminal, and manually powering off is the only way to get out of it. Before I installed xdm; after it crashes I can Ctrl-Alt-F1 to go into a virtual terminal and reboot. (Rebooting seemed to be the only way to get it working. There were no X or xorg processes running after the crash to kill, and I couldn't startx again.)
I also noticed that I'm definately not the only one with this problem, but I can't seem to find a solution anywhere (that works for me):
http://bbs.archlinux.org/viewtopic.php?id=56079
http://bbs.archlinux.org/viewtopic.php?id=55071
http://bbs.archlinux.org/viewtopic.php?id=54733
http://bbs.archlinux.org/viewtopic.php?id=58389
http://bbs.archlinux.org/viewtopic.php?id=55416
No, I don't have ndisswrapper. (I have a laptop but I never use wireless so I haven't set it up yet.)
I don't believe this is a hardware problem, because I run Windows on the same computer and have never had this problem on it.
Also I should note that now X is slow to start. Before (a couple of years ago) I could type startx and then I'd immediately be in X, but now the screen turns black and flickers a little before going into X. X has had this problem ever since I returned to Linux.
While it is going to be hard to find an immediate solution to this, does anoyone know how to get the magic sysreq key working in Arch? I have a very good feeling that the magic sysreq key could save me from manually turning off the power, but it doesn't seem to work for some reason. Would I need to compile a custom kernel? (I sure hope not)
xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Touchpad" "SendCoreEvents"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "record"
Load "GLcore"
Load "dri"
Load "glx"
Load "xtrap"
Load "dbe"
Load "freetype"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "Xkblayout" "us"
#Option "Xkblayout" "dvorak"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
EndSection
Section "Monitor"
DisplaySize 336 210 # mm
Identifier "Monitor0"
VendorName "LPL"
ModelName "LPL0000"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
#This no longer seems to work, must startx with DPI arg
#Option "UseEdidDpi" "false"
#Option "DCC" "no"
#Option "DPI" "96 x 96"
DisplaySize 338 212
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
Option "NoDDC" "true" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
#Option "DPI" "96 x 96"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800"
EndSubSection
EndSection
#Compositing may cause random crashing
#Section "Extensions"
# Option "Composite" "Enable"
#EndSection
$ lscpi
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
07:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
07:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
07:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
07:06.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
I have saved my xorg logs from right after the crash, but I don't see anything funny in them (well I'm not really the person to ask) and they are too big to fit in a post. If they are required I can try to find some way to show them.
Last edited by sokuban (2008-11-21 23:57:35)

Hi
Did that fix you?
I have been having the issue for a while, seems pretty random though I suspect virtual-box and/or wine to be tricker, but I have seen it crash without either, I think.
Anyways, black screen, lose keyboard, cold boot.
gnome, nvidia 177.82,
2.6.27-ARCH #1 SMP PREEMPT Fri Nov 28 10:56:24 UTC 2008 i686 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ AuthenticAMD
Xorg.0.log.old
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux abbit 2.6.27-ARCH #1 SMP PREEMPT Fri Nov 28 10:56:24 UTC 2008 i686
Build Date: 05 December 2008 09:10:55PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 7 01:22:37 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5900
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@1:0:0) nVidia Corporation G80 [GeForce 8800 GTS] rev 162, Mem @ 0xfa000000/0, 0xe0000000/0, 0xf8000000/0, I/O @ 0x0000ac00/0, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 177.82 Tue Nov 4 14:03:48 PST 2008
(II) Loading extension GLX
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 177.82 Tue Nov 4 13:42:45 PST 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TripleBuffer" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 8800 GTS (G80) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 327680 kBytes
(--) NVIDIA(0): VideoBIOS: 60.80.0d.00.02
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8800 GTS at PCI:1:0:0:
(--) NVIDIA(0): LG L1900R (DFP-1)
(--) NVIDIA(0): LG L1900R (DFP-1): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): LG L1900R (DFP-1): Internal Dual Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-1
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0): will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms" "True"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(II) config/hal: Adding input device Logitech USB Gaming Mouse
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.7
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Logitech USB Gaming Mouse: always reports core events
(**) Logitech USB Gaming Mouse: Device: "/dev/input/event2"
(II) Logitech USB Gaming Mouse: Found x and y relative axes
(II) Logitech USB Gaming Mouse: Found mouse buttons
(II) Logitech USB Gaming Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "Logitech USB Gaming Mouse" (type: MOUSE)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) AT Translated Set 2 keyboard: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "dk"
(**) AT Translated Set 2 keyboard: xkb_layout: "dk"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) NVIDIA(0): Initialized GPU GART.
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x3b) [0x813017b]
1: /usr/bin/X(xf86SigHandler+0x51) [0x80d8cb1]
2: [0xb7fc8400]
Fatal server error:
Caught signal 11. Server aborting
(II) Logitech USB Gaming Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:08.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1)
00:09.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2)
00:09.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2)
00:0a.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:0a.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:0c.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:0d.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:0d.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:0d.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:0e.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
00:10.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
00:11.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
00:16.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation G80 [GeForce 8800 GTS] (rev a2)
02:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
03:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)
Not sure what logs might else be of interest.
Don't feel like downgrading kernel or update to beta drivers if it's not the pit at all.
edit;
running nvidia beta (180.16) for a week or so, no crash, happy it seems to be the fix but not impressed at all.
Last edited by cell (2008-12-21 10:10:39)

I cannot ON my WiFi after I had update my software to iOS 7.1.1 on my iPhone 4s

My iPhone 4 s is funtioning properly for more than one year. Recently, I had Update my software to iOS 7.1.1and now I cannot ON my WiFi. The ON button on the WiFi is in active. I have friends who are also facing the same problem.

Troubleshooting 1:
Turn off the airplane mode by tapping Settings > Airplane Mode, then do the network resetting by tapping Setting > General > Reset > Reset Network Settings, and finally restart the iPhone 4S.
Note: If you reset the network setting, all recorded data will be removed, such as the Bluetooth pairing records, Wi-Fi passwords, VPN as well as the APN settings.
Troubleshooting 2:
You also can try this Wifi solution for iPhone 4S: Setting > General > Reset > Reset All Settings.
Note: This troubleshooting may fix the Wifi problem, but it will remove all of your preferences.
Troubleshooting 3:
If you have tried the above solutions, but still face the iPhone 4S Wifi issue, you can check if your 4S is upgraded to the newest available software. You can restore the iPhone 4S after checking the software updates in Apple iTunes.
Note: Restoring the iPhone 4S as a new phone is a slow process and it will reset your 4S to the factory setting. But you need to reload all your contacts or media information to the iPhone 4S after connecting your device to the computer.
Troubleshooting 4:
Some forums threads suggest another solution to fix the “gray out” iPhone 4S Wifi issue: placing the iPhone 4S in a refrigerator or freezer for several minutes, for they considered the 4S WiFi issue after iOS 7 update is caused by the heating issues.
Note: The lower temperature in the refrigerator or freezer may cool down the heating WiFi radio chip and will temporarily solve the WiFi problem for iPhone 4S, but the warm and cool temperature shift between the refrigerator or freezer and the room may cause the potential damage to your iPhone 4S.

Cannot Adjust Screen Brightness after Windows 10 Update

I Cannot Adjust Screen Brightness after i update my windows 8 os to windows 10. please give me solution. thank you

c00lajay wrote:
I have tried uninstalling the Graphic drivers, re installing from hp assistant, I even tried directly from Intel drivers but it is not letting me adjust brightness =( Latest driver version to my 4400 Gcard was 27/07/2015 I guess we have to wait since those drivers are win8.1 compatible only =(
Hey, I tried updating the driver, I googled something like intel graphic 4400 windows 10
Then I found this link
https://downloadcenter.intel.com/download/25150/Intel-Iris-Iris-Pro-and-HD-Graphics-Production-Driver-for-Windows-10-64-bit
read at descriptions to see compatible chipset. After I downloaded it started installing and the screen starting to do the "power off" think it does whenever you're installing video drivers et voila! ´the brightness went down and now my "brightness up and down" keys are working ='3
I hope this help you guys

Xorg Segfaulting on viewing console (ctl+alt+f1) after nvidia upgrade

I upgraded nvidia and nvidia-utils yesterday to the current nvidia-utils 169.09-2 and nvidia-utils 169.09-1 versions respectively. Pacman complained about the presence of /usr/lib/libXvMCNVIDIA_dynamic.so.1, so I followed the advice here (http://archlinux.org/pipermail/arch-gen … 16508.html) and did a -Sf installation. After that the installation and restart (I upgraded the kernel at the same time), went smoothly.
I run icewm, but boot to the console and start X manually. I tend to drop back into the console (ctl+alt+f1) fairly regularly. The X-server has now begun to catch Sig 11 and segfault (unpredictably), when I go to the console. It has happened three times today - the Xorg log terminates with :
Backtrace:
0: /usr/bin/X(xf86SigHandler+0x7e) [0x80baf4e]
1: [0xb7f0f420]
Fatal server error:
Caught signal 11. Server aborting
Any ideas please?

I'm posting here the setup of my /usr/lib/xorg/modules so you guys can see if there's a difference from removing the old package on the update or deleting the files by hand.
drwxr-xr-x 2 root root 26 Jan 25 16:59 drivers
drwxr-xr-x 2 root root 4,0K Fev 11 12:13 extensions
drwxr-xr-x 2 root root 27 Fev 3 12:59 fonts
drwxr-xr-x 2 root root 42 Nov 5 20:45 input
-rwxr-xr-x 1 root root 145K Fev 3 12:59 libafb.so
-rwxr-xr-x 1 root root 298K Fev 3 12:59 libcfb.so
-rwxr-xr-x 1 root root 114K Fev 3 12:59 libcfb32.so
-rwxr-xr-x 1 root root 63K Fev 3 12:59 libexa.so
-rwxr-xr-x 1 root root 160K Fev 3 12:59 libfb.so
-rwxr-xr-x 1 root root 30K Fev 3 12:59 libint10.so
-rwxr-xr-x 1 root root 133K Fev 3 12:59 libmfb.so
-rwxr-xr-x 1 root root 269K Jan 25 16:59 libnvidia-wfb.so.169.09
-rwxr-xr-x 1 root root 954K Fev 3 12:59 libpcidata.so
-rwxr-xr-x 1 root root 2,1M Fev 3 12:59 libscanpci.so
-rwxr-xr-x 1 root root 22K Fev 3 12:59 libshadow.so
-rwxr-xr-x 1 root root 26K Fev 3 12:59 libshadowfb.so
-rwxr-xr-x 1 root root 23K Fev 3 12:59 libvbe.so
-rwxr-xr-x 1 root root 28K Fev 3 12:59 libvgahw.so
lrwxrwxrwx 1 root root 45 Fev 11 12:13 libwfb.so -> /usr/lib/xorg/modules/libnvidia-wfb.so.169.09
-rwxr-xr-x 1 root root 196K Fev 3 12:59 libwfb.so.1.4
-rwxr-xr-x 1 root root 355K Fev 3 12:59 libxaa.so
-rwxr-xr-x 1 root root 158K Fev 3 12:59 libxf1bpp.so
-rwxr-xr-x 1 root root 95K Fev 3 12:59 libxf4bpp.so
-rwxr-xr-x 1 root root 4,8K Fev 3 12:59 libxf8_16bpp.so
-rwxr-xr-x 1 root root 161K Fev 3 12:59 libxf8_32bpp.so
drwxr-xr-x 2 root root 26 Fev 3 12:59 linux
drwxr-xr-x 2 root root 150 Fev 3 12:59 multimedia

Cannot restore iPhone 4 after IOS 5 update

So i updated my phone last night and it said that it needed to be resotred so I did, but just before it finished, it did not complete it and now will not restore at all. Keeps coming up with Error (1). I have followed the steps to what apple have given me by restarting my laptop, making sure I have the most recent iTunes and making sure all my software is upto date. and it all is, but I still cannot restore it. Can someone PLEASE help me! I have contacted Apple and the place where i got it from and they had no idea and could not help me. so could someone PLEASE PLEASE help me??

My best suggest is with error 1 is to make sure that your security software on your comptuer is temporarily disabled. That's very common with itunes restore errors- and more specifically with that errror code. If you can't get it to restore after disabling it...you can try another computer to restore and then bring it back to your original comptuer to sync or restore from you backup.
All else fail with that contact Apple Technical support at 1-800-694-7466 With further instructions. But they will definitely ask you about that security software....

Poor resolution of dektop after nvidia driver update

Hi,
I have a HP Pavilion Media center 8020n PC connected to HP w1907 monitor with optimum resolution of 1440X900 at 60 hz.
The display adapter is Nvidia GE force 7350 LE. It has Windows vista home premium with Intel Core 2 processor.
I recently updated the video driver from nvidia website version 266.58. Right after the download at the first bootup there was a big difference in the screen resolution. The picture is not crisp and sharp like it was before the update.
I have tried to uninstall the new driver, unnstall the old driver and restart in safe mode with the antivirus off but it still gives the same poor resolution with streched out picture.
Any suggestions?

Hi,
Look here for a monitor driver update. Install the driver and reboot. Then check the monitor type in the Device Manager. Now does it indicate the HP 1907 monitor?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

NVIDIA Tesla C2075 Disappeared after nvidia driver update

Hi,
I have 2 NVIDIA cards, the primary is NVIDIA GTS 450 and the secondary is Tesla C2075.
After upgrading
linux 3.6.9 => linux 3.7.9-2
nvidia 310 => nvidia 313.18-3
nvidia-utils 310 => nvidia-utils 313.18-1
opencl-nvidia 310 => opencl-nvidia 313.18-1
The cudaGetDeviceCount function in CUDA didn't recognize Tesla C2075,
and cudaGetDeviceProperties couldn't find it as well.
Strangely enough, Tesla C2075 still shows up in nvidia-smi and nvidia-settings,
and some programs using opencl-nvidia interface could recognize Tesla C2075 as well,
the problem is only with CUDA programs....
I tried reinstalling cuda5 and recompiling the binaries,
switching the Tesla C2075 to the primary video card,
but they didn't make any difference.
Any idea on how this could happen?
Now I just down-graded nvidia driver and Tesla C2075 shows up in CUDA programs again....
Thanks.
Last edited by liuexp (2013-02-27 13:06:34)

[update]
Strange enough, the issue just disappeared with the latest update,
i.e. linux-3.8.4-1 & nvidia-313.26-1

[SOLVED]Fusion-icon won't start after Nvidia driver update

Hi,
Today I got an update from Arch including a new kernel and an update of my Nvidia drivers. I use GNOME with Compiz Fusion, that is started by Fusion-Icon. Now Fusion-Icon gives the following errors:
[jozef@frodo ~]$ fusion-icon
* Detected Session: gnome
* Error: glxinfo not installed!
I searched in the repos, but I coulnd't find a package called "glxinfo".
Could someone help?
Kind regards,
Jozef00
Last edited by jozef00 (2010-11-26 16:30:03)

Hi Wonder,
Thank you very much! Now Compiz Fusion works again.
Kind regards,
Jozef00

Cannot sync iphone 4 after iOS 5 update

I get an error saying that sync session failed to finish. I have tried only syncing apps and every other suggestion I could find but still cannot sync. Anyone know a solution?

My best suggest is with error 1 is to make sure that your security software on your comptuer is temporarily disabled. That's very common with itunes restore errors- and more specifically with that errror code. If you can't get it to restore after disabling it...you can try another computer to restore and then bring it back to your original comptuer to sync or restore from you backup.
All else fail with that contact Apple Technical support at 1-800-694-7466 With further instructions. But they will definitely ask you about that security software....

Cannot access icloud information after IOS 7 update.

I updated to IOS 7 last night. I have an old invalid email address that is no longer in effect and cannot remember the password for my ICloud account. I cannot access my Icloud account and retrieve my contacts, etc. How do I remove that old email address linked to Icloud account so I can get to my contact information?

Hello Maj2950,
Thank you for using Apple Support Communities!
It sounds lik eyou may need to go into your Settings and enable access from the app to your photos.
Turn off access to private information. Go to Settings > Privacy. You can see which apps and features have requested and been granted access to the following information:
Contacts
Calendar
Reminders
Photos
Bluetooth Sharing
Microphone
Twitter
Facebook
From: iPhone User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Cheers,
Sterling

Pages having Korean font issues after iOS 7 update.

iWork on my ipad and iphone cannot handle Korean font after iOS 7 update. It displays Korean correctly in those documents I created before the recent iOS 7 update, but breaks down as soon as I try to edit them. Anyone has the same problem with international fonts? Is there anyway to fix the problem? Is it an iWork issue or the iOS 7 issue? It certainly does not look like a hardware issue, because other apps work fine indeed.

You should report this to Apple (as others have):
http://www.apple.com/feedback

Cannot restore the phone after Tango(refresh with ...

Hello!
I cannot restore my phone after the Tango update. The Zune software says that there is a problem. I get the error code 801812E0. It is very frustrating! Has anybody the same issue?

Hi,
Thanks for the feedback. You can not use the restore function in Zune to get information back to your phone. The restore function will completely rewrite the restored content including the OS and firmware.
You can sync music and other media files back using Zune. All contacts will be synced back as soon as you setup their accounts again in Settings>email+accounts and you can re-download apps using the app Reinstaller. For paid apps you can just select BUY again and you will be notified you have paid for the app and you can install it again after that.
Hope this helps, let us know if you have any further questions.
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Cannot Ctrl+Alt+F1 after nvidia-173xx update

Similar Messages

Maybe you are looking for