XPath Not Working (Namespace ?)

I am not receiving any errors, but similair XPath in XMLSpy works...
I have an XML document:
<Results>
<acc:Account xmlns:account="http://test/account" id="1">
<acc:Name>Account Name 1</acc:Name>
</acc:Account>
<acc:Account xmlns:account="http://test/account" id="2">
<acc:Name>Account Name 2</acc:Name>
</acc:Account>
</Results>
When I use: "//Results" I get a a Node back
When I use: //Results/acc:Account[@id=1], I get no results back and no errors
To avoid namespace problems I used a StaticNamespaceResolver...
My code:
HashMap prefixes = new HashMap(1);
String namespace = "http://test/account";
prefixes.put("acc", namespace);
try {
     XObject obj = XPathAPI.eval(RootNode, queryStr, new StaticPrefixResolverImpl(prefixes));
NodeList nl = obj.nodelist();
System.out.println("NodeList Length: " + nl.getLength());
} catch (Exception ee) {
System.out.println(ee);
Thanks!

Seems to me your problem is that you can't decide what prefix to use...
Is it 'acc' or 'account' ?
In your sample document, try:
<Results>
<acc:Account xmlns:acc="http://test/account" id="1">
<acc:Name>Account Name 1</acc:Name>
</acc:Account>
<acc:Account xmlns:acc="http://test/account" id="2">
<acc:Name>Account Name 2</acc:Name>
</acc:Account>
</Results>And see what the difference is...
Also, the prefix you use in your XPath expression does not have to be the same as the one used in the document. They are linked via the URI and a NamespaceContext. It's quite likely you'll need to implement a NamespaceContext (depending on what XPath API you are using).
-Rob

Similar Messages

  • XPath not working?

    Hiho,
    i'm trying to transform a xmltype using a xstl in Oralce XE. In my stylesheet i have for example something like this:
    <xsl:value-of select="count(//Gemeinde)"/>According to my xslt book this should give me the total number of Gemeinde nodes, no matter where they appear in my xml document.
    When i transform my xml document outside oracle, for example with xalan or saxon, i get the expected result.
    When i transform it in oracle, using xmltransform, the result of the count is always 0.
    I tried several XPath expressions, none seems to work.
    Where am i doing wrong?
    Thanks for help in advance,
    Dirk

    Found the solution to my problem. My xml document didn't have a namespace. After adding it the xpath works fine.

  • XPATH does not work in ccBPM

    Hi,
    I have a problem using XPATH expressions in a ccBPM.
    I'm using an XPATH-expression in a fork step, but although the payload of the relevant message is correct, it doesn't seem to work. The XPATH expression is as follows:
    IDOC_TO_ISU./ZE_ISU_VDEW_UTILMD_V40/IDOC/ZE1_E1VDEWIDE_1/OBJECT_TYPE EX
    I also tried
    IDOC_TO_ISU./p1:ZE_ISU_VDEW_UTILMD_V40/IDOC/ZE1_E1VDEWIDE_1/OBJECT_TYPE EX
    IDOC_TO_ISU is the name of the container, ZE_ISU_VDEW_UTILMD_V40 ist the root tag of the message, an p1 the namespace of the message.
    Further, I used the following expression in a container operation to count the number of elements within a message:
    count(/p1:ZE_ISU_VDEW_UTILMD_V40/IDOC/ZE1_E1VDEWIDE_1)
    Although there are several ZE1_E1VDEWIDE_1 elements in my message, the result is '0'
    Are my XPATH expressions wrong or do XPATH expressions not work in ccBPM in general?
    Regards,
    Torsten

    Hi,
    thank you for your contributions.
    I had positive experiences with XPATH-expressions in receiver determination, but it seems that it doesn't work in ccBPM.
    Using context objects, I cannot query payload fields, so I also do not see how I can solve the problem with context objects.
    Has anybody an idea or an example about a successful XPATH expression in ccBPM?
    Regards,
    Torsten

  • I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4).  When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils".  Anyone know wha

    I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4).  When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils".  Anyone know what the problem is and how to fix? Thanks.

    https://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…

  • XPath query works with CLOB but not with object relational

    hi all
    i have the following queries,the XQuery work with all, but XPath queries work with XMLType CLOB and Binary XML, but they do not work with XMLType as Object relational,
    select extract (object_value,'movies/directorfilms/films/film [studios/studio = "Gaumont"]')
    from xorm;
    select extract (object_value,'movies/directorfilms[director/dirname = "L.Cohen"]/films/film[position()=2]/t')
    from xorm;
    they shows this message
    ORA-00932: inconsistent datatypes: expectd SYSTEM.name683_COLL got CHAR
    thanks

    Hi Marco
    fisrt here is my RO
    BEGIN
    DBMS_XMLSCHEMA.registerSchema(
    SCHEMAURL=>'http://......../ORMovies.xsd',
    SCHEMADOC=>bfilename('DB','Movies.xsd'),
    LOCAL =>false,
    GENTYPES=>true,
    GENTABLES=>FALSE,
    CSID=>nls_charset_id('AL32UTF8'));
    END;
    create table XORM of xmltype
    xmltype store as object relational
    XMLSCHEMA "http://......../ORMovies.xsd"
    ELEMENT "movies";
    INSERT INTO XORM
    VALUES(XMLType(BFILENAME('DB','ORMovies.xml'),nls_charset_id('AL32UTF8')));
    here the XQuery format that work fine with the OR
    A/D
    select XMLQuery ('for $a in movies/directorfilms/films/film
              where $a/studios/studio = "Gaumont"
              return $a'
         passing object_value
         returning CONTENT)"TitleX"
    from xorm;
    child element query
    select XMLQuery ('for $a in movies/directorfilms/director[dirname = "Feyder"]
              let $b:=$a/../films/film[position()=2]
              return $b/t'
         passing object_value
         returning CONTENT)"TitleX"
    from xorm;
    here is the XPath format which doesn't work
    select extract (object_value,'movies/directorfilms/films/film [studios/studio = "Gaumont"]')
    from xorm;
    select extract (object_value,'movies/directorfilms[director/dirname = "Feyder"]/films/film[position()=2]/t')
    from xorm;
    by the way all queries work fine with the CLOB or Binary XML
    many thanx Marco

  • ** XPath condition not work well in Receiver Determination.

    Hi,
    My scenario is having 3 receivers. I have 'Student' is the data type. I use the same data type for Source & Target Message Types. Requirement is I have to send
    1) only records which are having SCOURSE = 'BE' to receiver 1
    2) only records which are having SCOURSE = 'MCA' to receiver 2
    3) only records which are having SCOURSE = 'MBA' to receiver 3
    My Input.xml file contains the following records.
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:THIRD_MT_OB xmlns:ns0="http://ganesh_third">
       <STUDENT_INFO>
          <ST_ID>10020</ST_ID>
          <SNAME>Raja</SNAME>
          <SCOURSE>BE</SCOURSE>
          <SFEES>3000</SFEES>
          <SMARKS>1200</SMARKS>
       </STUDENT_INFO>
       <STUDENT_INFO>
          <ST_ID>10021</ST_ID>
          <SNAME>Ram</SNAME>
          <SCOURSE>MCA</SCOURSE>
          <SFEES>3000</SFEES>
          <SMARKS>1200</SMARKS>
       </STUDENT_INFO>
       <STUDENT_INFO>
          <ST_ID>10022</ST_ID>
          <SNAME>Ram</SNAME>
          <SCOURSE>MBA</SCOURSE>
          <SFEES>3000</SFEES>
          <SMARKS>1200</SMARKS>
       </STUDENT_INFO>
    </ns0:THIRD_MT_OB>
    I set the Xpath condition in the Receiver Determination Step and add the 3 receivers for against the conditions.
    Our problem is, If we send the single record in the input file, the corresponding receiver is selected correctly and we get the output file for that receiver. But, if we send the all combination of records (MCA,BE,MBA) 3 receivers are selected and the 3 output files we get. But, the three files are having the all records (MCA,BE,MBA). Instead, we want the first file should only have MCA record,  the 2nd file should only have BE record and finally the 3rd file should only have MBA record. That means each receiver should receive only one record for the above input.
    Friends, I though it will work for the 'XPath Expression' against receivers in the Receiver Determination Step. But, it didn't work. (Records are not split up)
    How do achieve this, friends?
    Could you kindly help me to solve this problem.
    Kind Regards,
    Jeg P.

    If you are trying to split you input msg and send it  to 3 different receivers using conditional receiver determination then it will not work. Once a condition is meet in the receiver determination then the entire msg is forwarded to the corresponding receiver, that is why when you have a single row in your input file which results in a single msg in XI the conditional receiver works. Now when you have multiple rows in your input file still only one msg is being created in XI for all the rows currently so all the conditions are being meet and the msg is forwarded to all the receivers.
    If you are using FCC in the sender side then use the "recordset per msg" parameter to consider each row of your input file as a separate msg in XI and the rest will automatically fall in place.
    Cheer's

  • Namespaces not working as expected

    Hi, I've got problems with namespaces not working as expected. When I isolate a process into a new network and mount namespace, a newly mounted file system will be visible to all processes.
    Steps to reproduce:
    $ sudo unshare -mn bash
    bash# mount -t sysfs sysfs /sys
    bash# exit
    $ cat /proc/mounts
    Result:
    /proc/mounts will contain a new line for sysfs. This means the /sys/fs/cgroups directory will appear to be empty as the new sysfs is mounted over the old However you can undo it by
    sudo umount /sys
    Expected result:
    The /sys directory will only be new inside the bash process started using unshare and not anymore once you exit bash.
    Did I understand something wrong? Or might this be a bug in the kernel?
    Note that when using
    unshare -m bash
    without isolating the network namespace it will refuse to mount sysfs as it is already mounted or busy. Strange.

    Hello, because sysfs is shared, see unshare(1) for more details.

  • Xpath condition not working for determining receivers

    hello all
    am writing a xpath expression for a simple structure
    <doc>
       <status>
       <id>
    </doc>
    status is attribute field.and will have value 'error' and some other value for no error. I want to choose one receiver if error and other receiver if no error
    so I wrote an xpath expression
    /Doc[@status='Error']   EX    --> Error receiver
    count(/Doc[@status='Error']) = '0'   --> no error receiver
    it was working couple of days ago but suddenly stopped working
    whats going on? thx
    mike

    But xpath is not working properly..
    Are you using this in the condition editor of Interface Determination (it should not be a cause of concern though)
    Can you confirm that the condition that you have specified is proper ....does it work when you specify only one condition?
    Regards,
    Abhishek.

  • Fault policies locaton and test xpath conditions not working.

    I cant place fault policies files in a non mds location or the composite directory.
    For example it does not work with an /opt/...... server path in the composite.xml property.
    Also, I can't get working xpath test expressions like this:
    <condition>
    <test xmlns:elem="http://na.telefonica.com/elementoscomunes">$fault.fault0/elem:AREA_ERROR/ErrorType = "F"</test>
    <action ref="reintentos-neon"/>
    </condition>
    In jdeveloper, the part is "fault0", and the subelements are like i've showed, but the condition never matches.
    I saw in a forum that the sintax was $fault.nameofpart/xpathexpression, but doesn't seem to work. I've tried lots of permutations of the syntax, and also with 'F' instead of "F".
    ¿Any Idea?

    This is the exception in the server GUI
    <fault>
    <bpelFault>
    <faultType>1</faultType>
    <OBA_Par_Alta_AveriaFault>
    <part name="fault0">
    <elem:AREA_ERROR>
    <ErrorID>8888</ErrorID>
    <ErrorType>F</ErrorType>
    <ErrorDesc>Afsafds</ErrorDesc>
    </elem:AREA_ERROR>
    </part>
    </OBA_Par_Alta_AveriaFault>
    </bpelFault>
    </fault>

  • XPATH-expressions and namespaces

    I have a xml-file for testing my xpath expression, like this:
    <a>
       <b>
          <c>aaa</c>
             <d>
                <e>111</e>
             </d>
       </b>
       <b>
          <c>bbb</c>
             <d>
                <e>222</e>
             </d>
       </b>
       <b>
          <c>ccc</c>
             <d>
                <e>333</e>
             </d>
       </b>What I want is to get the value of element 'e', based on a check on what the value of element 'c' is. I alway know the value of element 'c'.
    I solve this by using this xpath-expression in my xsl-file:
    <xsl:variable name="xpathTest" select="//e[../preceding-sibling::c = 'bbb']" />This expression should return '222', and it works!!!
    But, when I use the another xml-file with a similar structure, with namespaces, like this:
    <body xsi:type="fkpsoap:FKPSOAPOperationResponse">
       <FKPSOAPOperationResponse>
          <fkpsoap_1:fkrdk178_output_data>
             <fkpsoap_1:fkrdk178_list_cust_information>
                <fkpsoap_1:fkrdk178_list_customerinfo>
                   <fkpsoap_1:fkrdk178_list_variable_code> aaa </fkpsoap_1:fkrdk178_list_variable_code>
                   <fkpsoap_1:fkrdk178_list_value_name>
                      <fkpsoap_1:fkrdk178_list_value_text> 111 </fkpsoap_1:fkrdk178_list_value_text>
                </fkpsoap_1:fkrdk178_list_customerinfo>
                <fkpsoap_1:fkrdk178_list_customerinfo>
                   <fkpsoap_1:fkrdk178_list_variable_code> bbb </fkpsoap_1:fkrdk178_list_variable_code>
                   <fkpsoap_1:fkrdk178_list_value_name>
                      <fkpsoap_1:fkrdk178_list_value_text> 222 </fkpsoap_1:fkrdk178_list_value_text>
                </fkpsoap_1:fkrdk178_list_customerinfo>
                <fkpsoap_1:fkrdk178_list_customerinfo>
                   <fkpsoap_1:fkrdk178_list_variable_code> ccc </fkpsoap_1:fkrdk178_list_variable_code>
                   <fkpsoap_1:fkrdk178_list_value_name>
                      <fkpsoap_1:fkrdk178_list_value_text> 333 </fkpsoap_1:fkrdk178_list_value_text>
                </fkpsoap_1:fkrdk178_list_customerinfo>
             </fkpsoap_1:fkrdk178_list_cust_information>
          </fkpsoap_1:fkrdk178_output_data>
       </FKPSOAPOperationResponse>
    </body>Then the xpath-expression does not work!
    I can easily extract the value of the element similar to the element 'e' in my test-file, but then I will always get the value from the first occurance of 'e', which is '111'.
    Can anyone help me with this?

    Most APIs which let you create XPath objects allow you to create a namespace context and attach it to the XPath object. Your API most likely does too, whatever it is. Then you would just use the prefixes which the namespace context describes in your XPath expression.
    (This namespace context generally maps prefixes to namespace URIs. Remember that the namespace URI is really what the XPath is looking for and the prefix is just a short cut for you to use.)

  • XSLT not working correctly in BPEL

    Hi,
    We are using XSLT to remove namespaces from our XSL. When testing this XSL in Jdeveloper, it works fine. But when we using it in BPEL, the transformation is not working correctly.
    Please find below the XSL content
    +<xsl:stylesheet version="1.0"+
    xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
    xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
    xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
    xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
    xmlns:ora="http://schemas.oracle.com/xpath/extension"                xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"+
    xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
    xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
    xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
    exclude-result-prefixes="xsl xref xp20 bpws ora ehdr orcl ids hwf">
    +<xsl:template match="comment()|processing-instruction()|/">+
    +<xsl:copy>+
    +<xsl:apply-templates/>+
    +</xsl:copy>+
    +</xsl:template>+
    +<xsl:template match="*">+
    +<xsl:element name="{local-name()}">+
    +<xsl:apply-templates select="@* | node()"/>+
    +</xsl:element>+
    +</xsl:template>+
    +<xsl:template match="@*">+
              +<xsl:choose>+
                   +<xsl:when test="name() != 'xmlns'">+
                        +<xsl:attribute name="{local-name()}">+
                             +<xsl:value-of select="."/>+
                        +</xsl:attribute>+
                   +</xsl:when>+
              +</xsl:choose>+
    +</xsl:template>+
    +</xsl:stylesheet>+
    The BPEL code of the transform is:
    +<assign name="Transform_1">+
    +<bpelx:annotation>+
    +<bpelx:pattern>transformation</bpelx:pattern>+
    +</bpelx:annotation>+
    +<copy>+
    +<from expression="ora:processXSLT('Transformation_1.xsl',bpws:getVariableData('inputVariable','payload'))"/>+
    +<to variable="TempVar" part="payload" query="/ns1:mthReplacement_input"/>+
    +</copy>+
    +</assign>+
    Not sure why the transformation isnt working in BPEL. Has anyone faced similar issues? Please share your experiences.
    Thanks
    John

    Hi John ,
    We have tried this instead of writing new code in the xslt , pls do the following
    1.Open the xslt in jdev.
    2.Remove the attribute exclude-result-prefixes for the element xsl:stylesheet.
    3.Your new XSLT file should look like below,
    <xsl:stylesheet version="1.0"
    xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
    xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
    xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
    xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
    +xmlns:ora="http://schemas.oracle.com/xpath/extension" xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"
    xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
    xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
    xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
    >
    ....business logic...
    </xsl:stylesheet>
    4.Compile and deploy your BPEL Process.
    5.You should not see any namespaces in the BPEL Console now for this xslt.
    Thank you.
    Regards
    Venkat.

  • Powershell Script Send-zip not working when running in cmd

    I found there is powershell send-zip script available in technet.  I tested it and found that it works when the script is running under powershell env, but when it is calling in cmd env, I can see the zip file, but there is nothing in it.  If
    I add the "-noexit" switch it runs normally.  Anyone have ideas what might be happening?
    The orig codes is as following:
    function global:SEND-ZIP ($zipfilename, $filename) { 
    # The $zipHeader variable contains all the data that needs to sit on the top of the 
    # Binary file for a standard .ZIP file
    $zipHeader=[char]80 + [char]75 + [char]5 + [char]6 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0
    # Check to see if the Zip file exists, if not create a blank one
    If ( (TEST-PATH $zipfilename) -eq $FALSE ) { Add-Content $zipfilename -value $zipHeader }
    # Create an instance to Windows Explorer's Shell comObject
    $ExplorerShell=NEW-OBJECT -comobject 'Shell.Application'
    # Send whatever file / Folder is specified in $filename to the Zipped folder $zipfilename
    $SendToZip=$ExplorerShell.Namespace($zipfilename.tostring()).CopyHere($filename.ToString())
    SEND-ZIP C:\abc\a.ZIP C:\a\a.bak

    I've had the same problem with similar code found on another web site.
    The reason the zip file ends up being empty is that the temporary $ExplorerShell object you created is deleted when the send-zip function returns,
    and any incomplete copy operation that may still be ongoing at that time is aborted. (The copy operation is asynchronous, and continues after the CopyHere() function returns.)
    To work around this, you need to add a delay loop before you return, waiting for the copied object to appear in the zip.
    (Note that adding a fixed delay, like I've seen on other web sites, does not work: Small files appear almost immediately, whereas large file or worse still large subdirectory trees can take a long time to appear.)
    Try changing the end of your routine to something like...
    # Create an instance to Windows Explorer's Shell comObject 
    $ExplorerShell=NEW-OBJECT -comobject 'Shell.Application' 
    # Open the zip file object
    $zipFile = $ExplorerShell.Namespace($zipfilename.tostring())
    # Count how many objects were in the zip file initially
    $count = $zipFile.Items().Count
    # Send whatever file / Folder is specified in $filename to the Zipped folder $zipfilename 
    $SendToZip=$zipFile.CopyHere($filename.ToString())
    # Wait until the file / folder appears in the zip file
    $count += 1 # We expect one more object to be there eventually
    while ($zipFile.Items().Count -lt $count) {
        Write-Debug "$filename not in the zip file yet. Sleeping 100ms"
        Start-Sleep -milliseconds 100
    # Return deletes the $zipFile object, and aborts incomplete copy operations.

  • Why ribbon XML does not work in Excel 2007?

    I installed 4 VSTO Excel add-ins on an Excel 2007 PC today. The two that use a visual designer ribbon worked fine. But the 2 that use a Ribbon (XML) did not. The add-in starts ok. But the ribbon does not show. Why would that be?
    I wrote two more add-ins to demonstrate the problem. One puts an OK button on the ribbon using the visual designer. That add-in installs on the excel  2007 PC and works as it should. But the 2nd, an add-in that uses Ribbon (XML) to put a button on the
    ribbon, does not work.  The add-in does not display on the ribbon.
    Here is the code of the Ribbon (XML) add-in project.  How to get a ribbon (XML) ribbon to display in excel 2007?
    thanks,
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Xml.Linq;
    using Excel = Microsoft.Office.Interop.Excel;
    using Office = Microsoft.Office.Core;
    using Microsoft.Office.Tools.Excel;
    namespace ExcelAddIn4
    public partial class ThisAddIn
    private void ThisAddIn_Startup(object sender, System.EventArgs e)
    private void ThisAddIn_Shutdown(object sender, System.EventArgs e)
    protected override Office.IRibbonExtensibility CreateRibbonExtensibilityObject()
    return new Ribbon1();
    #region VSTO generated code
    /// <summary>
    /// Required method for Designer support - do not modify
    /// the contents of this method with the code editor.
    /// </summary>
    private void InternalStartup()
    this.Startup += new System.EventHandler(ThisAddIn_Startup);
    this.Shutdown += new System.EventHandler(ThisAddIn_Shutdown);
    #endregion
    <?xml version="1.0" encoding="UTF-8"?>
    <customUI xmlns="http://schemas.microsoft.com/office/2009/07/customui" onLoad="Ribbon_Load">
    <ribbon>
    <tabs>
    <tab idMso="TabAddIns">
    <group id="ContentGroup" label="Content">
    <button id="Button1" label="ok" screentip="Text"
    onAction="Button_OnAction" supertip="Inserts text at the cursor location"/>
    </group>
    </tab>
    </tabs>
    </ribbon>
    </customUI>
    using System;
    using System.Collections.Generic;
    using System.IO;
    using System.Linq;
    using System.Reflection;
    using System.Runtime.InteropServices;
    using System.Text;
    using System.Windows.Forms;
    using Office = Microsoft.Office.Core;
    // TODO: Follow these steps to enable the Ribbon (XML) item:
    // 1: Copy the following code block into the ThisAddin, ThisWorkbook, or ThisDocument class.
    // protected override Microsoft.Office.Core.IRibbonExtensibility CreateRibbonExtensibilityObject()
    // return new Ribbon1();
    // 2. Create callback methods in the "Ribbon Callbacks" region of this class to handle user
    // actions, such as clicking a button. Note: if you have exported this Ribbon from the Ribbon designer,
    // move your code from the event handlers to the callback methods and modify the code to work with the
    // Ribbon extensibility (RibbonX) programming model.
    // 3. Assign attributes to the control tags in the Ribbon XML file to identify the appropriate callback methods in your code.
    // For more information, see the Ribbon XML documentation in the Visual Studio Tools for Office Help.
    namespace ExcelAddIn4
    [ComVisible(true)]
    public class Ribbon1 : Office.IRibbonExtensibility
    private Office.IRibbonUI ribbon;
    public Ribbon1()
    public void Button_OnAction(Office.IRibbonControl control)
    MessageBox.Show("Button_OnAction");
    #region IRibbonExtensibility Members
    public string GetCustomUI(string ribbonID)
    return GetResourceText("ExcelAddIn4.Ribbon1.xml");
    #endregion
    #region Ribbon Callbacks
    //Create callback methods here. For more information about adding callback methods, visit http://go.microsoft.com/fwlink/?LinkID=271226
    public void Ribbon_Load(Office.IRibbonUI ribbonUI)
    this.ribbon = ribbonUI;
    #endregion
    #region Helpers
    private static string GetResourceText(string resourceName)
    Assembly asm = Assembly.GetExecutingAssembly();
    string[] resourceNames = asm.GetManifestResourceNames();
    for (int i = 0; i < resourceNames.Length; ++i)
    if (string.Compare(resourceName, resourceNames[i], StringComparison.OrdinalIgnoreCase) == 0)
    using (StreamReader resourceReader = new StreamReader(asm.GetManifestResourceStream(resourceNames[i])))
    if (resourceReader != null)
    return resourceReader.ReadToEnd();
    return null;
    #endregion

    Hello Steve,
    Most probably you have got an error in the ribbon XML markup. See
    How to: Show Add-in User Interface Errors for more information.
    I have noticed the following xml namespace:
    <customUI xmlns="http://schemas.microsoft.com/office/2009/07/customui" onLoad="Ribbon_Load">
    Use the following one instead:
    <customUI xmlns="http://schemas.microsoft.com/office/2006/01/customui"
    Also make sure that specified idMso values exist in Office 2007.
    You can read more about the Fluent UI (aka Ribbon UI) in the following series of articles in MSDN:
    1.
    Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
    2.
    Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
    3.
    Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)

  • Weblogic Http Apache Plugin not working

    Hi,
    I have installed weblogic server 10.3 on WindowsXP Professional and Http Apache 2.2 is running on port 80. I followed the following document to configure the Apache plugin:
    http://e-docs.bea.com/wls/docs103/plugins/apache.html
    but when I go and test the plugin it always comes back with 404 page not found. As per the documentation I am testing it as
    http://localhost:80/weblogic/
    Here is my httpd.conf
    Include "C:/bea/alui/plumtreeconf/"
    # This is the main Apache HTTP server configuration file.  It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do.  They're here only as hints or reminders.  If you are unsure
    # consult the online docs. You have been warned. 
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path.  If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
    # server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
    # NOTE: Where filenames are specified, you must use forward slashes
    # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
    # If a drive letter is omitted, the drive on which httpd.exe is located
    # will be used by default.  It is recommended that you always supply
    # an explicit drive letter in absolute paths to avoid confusion.
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do not add a slash at the end of the directory path.  If you point
    # ServerRoot at a non-local disk, be sure to point the LockFile directive
    # at a local disk.  If you wish to share the same ServerRoot for multiple
    # httpd daemons, you will need to change at least LockFile and PidFile.
    ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #Listen 12.34.56.78:80
    Listen 80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule actions_module modules/mod_actions.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule asis_module modules/mod_asis.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    #LoadModule auth_digest_module modules/mod_auth_digest.so
    #LoadModule authn_alias_module modules/mod_authn_alias.so
    #LoadModule authn_anon_module modules/mod_authn_anon.so
    #LoadModule authn_dbd_module modules/mod_authn_dbd.so
    #LoadModule authn_dbm_module modules/mod_authn_dbm.so
    LoadModule authn_default_module modules/mod_authn_default.so
    LoadModule authn_file_module modules/mod_authn_file.so
    #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    #LoadModule authz_dbm_module modules/mod_authz_dbm.so
    LoadModule authz_default_module modules/mod_authz_default.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_host_module modules/mod_authz_host.so
    #LoadModule authz_owner_module modules/mod_authz_owner.so
    LoadModule authz_user_module modules/mod_authz_user.so
    LoadModule autoindex_module modules/mod_autoindex.so
    #LoadModule cache_module modules/mod_cache.so
    #LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule cgi_module modules/mod_cgi.so
    #LoadModule charset_lite_module modules/mod_charset_lite.so
    #LoadModule dav_module modules/mod_dav.so
    #LoadModule dav_fs_module modules/mod_dav_fs.so
    #LoadModule dav_lock_module modules/mod_dav_lock.so
    #LoadModule dbd_module modules/mod_dbd.so
    #LoadModule deflate_module modules/mod_deflate.so
    LoadModule dir_module modules/mod_dir.so
    #LoadModule disk_cache_module modules/mod_disk_cache.so
    #LoadModule dumpio_module modules/mod_dumpio.so
    LoadModule env_module modules/mod_env.so
    #LoadModule expires_module modules/mod_expires.so
    #LoadModule ext_filter_module modules/mod_ext_filter.so
    #LoadModule file_cache_module modules/mod_file_cache.so
    #LoadModule filter_module modules/mod_filter.so
    #LoadModule headers_module modules/mod_headers.so
    #LoadModule ident_module modules/mod_ident.so
    #LoadModule imagemap_module modules/mod_imagemap.so
    LoadModule include_module modules/mod_include.so
    #LoadModule info_module modules/mod_info.so
    LoadModule isapi_module modules/mod_isapi.so
    #LoadModule ldap_module modules/mod_ldap.so
    #LoadModule logio_module modules/mod_logio.so
    LoadModule log_config_module modules/mod_log_config.so
    #LoadModule log_forensic_module modules/mod_log_forensic.so
    #LoadModule mem_cache_module modules/mod_mem_cache.so
    LoadModule mime_module modules/mod_mime.so
    #LoadModule mime_magic_module modules/mod_mime_magic.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule proxy_module modules/mod_proxy.so
    #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    #LoadModule proxy_connect_module modules/mod_proxy_connect.so
    LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    #LoadModule rewrite_module modules/mod_rewrite.so
    LoadModule setenvif_module modules/mod_setenvif.so
    #LoadModule speling_module modules/mod_speling.so
    #LoadModule ssl_module modules/mod_ssl.so
    #LoadModule status_module modules/mod_status.so
    #LoadModule substitute_module modules/mod_substitute.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    #LoadModule userdir_module modules/mod_userdir.so
    #LoadModule usertrack_module modules/mod_usertrack.so
    #LoadModule version_module modules/mod_version.so
    #LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule weblogic_module modules/mod_wl_22.so
    <IfModule mod_weblogic.c>
      WebLogicHost localhost
      WebLogicPort 7001
    </IfModule>
    <Location /weblogic>
      SetHandler weblogic-handler
      PathTrim /weblogic
    </Location>
    <IfModule !mpm_netware_module>
    <IfModule !mpm_winnt_module>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch. 
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    User daemon
    Group daemon
    </IfModule>
    </IfModule>
    # 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition.  These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed.  This address appears on some server-generated pages, such
    # as error documents.  e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #ServerName localhost:80
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs"
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # features. 
    ProxyRequests On
    <Directory />
        Options FollowSymLinks
        AllowOverride None
        Order deny,allow
        Deny from all
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs">
        # Possible values for the Options directive are "None", "All",
        # or any combination of:
        #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
        # Note that "MultiViews" must be named *explicitly* --- "Options All"
        # doesn't give it to you.
        # The Options directive is both complicated and important.  Please see
        # http://httpd.apache.org/docs/2.2/mod/core.html#options
        # for more information.
        Options Indexes FollowSymLinks
        # AllowOverride controls what directives may be placed in .htaccess files.
        # It can be "All", "None", or any combination of the keywords:
        #   Options FileInfo AuthConfig Limit
        AllowOverride None
        # Controls who can get stuff from this server.
        Order allow,deny
        Allow from all
    </Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    <IfModule dir_module>
        DirectoryIndex index.html
    </IfModule>
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <FilesMatch "^\.ht">
        Order allow,deny
        Deny from all
        Satisfy All
    </FilesMatch>
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here.  If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "logs/error.log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    <IfModule log_config_module>
        # The following directives define some format nicknames for use with
        # a CustomLog directive (see below).
        LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
        LogFormat "%h %l %u %t \"%r\" %>s %b" common
        <IfModule logio_module>
          # You need to enable mod_logio.c to use %I and %O
          LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
        </IfModule>
        # The location and format of the access logfile (Common Logfile Format).
        # If you do not define any access logfiles within a <VirtualHost>
        # container, they will be logged here.  Contrariwise, if you *do*
        # define per-<VirtualHost> access logfiles, transactions will be
        # logged therein and *not* in this file.
        CustomLog "logs/access.log" common
        # If you prefer a logfile with access, agent, and referer information
        # (Combined Logfile Format) you can use the following directive.
        #CustomLog "logs/access.log" combined
    </IfModule>
    <IfModule alias_module>
        # Redirect: Allows you to tell clients about documents that used to
        # exist in your server's namespace, but do not anymore. The client
        # will make a new request for the document at its new location.
        # Example:
        # Redirect permanent /foo http://localhost/bar
        # Alias: Maps web paths into filesystem paths and is used to
        # access content that does not live under the DocumentRoot.
        # Example:
        # Alias /webpath /full/filesystem/path
        # If you include a trailing / on /webpath then the server will
        # require it to be present in the URL.  You will also likely
        # need to provide a <Directory> section to allow access to
        # the filesystem path.
        # ScriptAlias: This controls which directories contain server scripts.
        # ScriptAliases are essentially the same as Aliases, except that
        # documents in the target directory are treated as applications and
        # run by the server when requested rather than as documents sent to the
        # client.  The same rules about trailing "/" apply to ScriptAlias
        # directives as to Alias.
        ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
        # ScriptSock: On threaded servers, designate the path to the UNIX
        # socket used to communicate with the CGI daemon of mod_cgid.
        #Scriptsock logs/cgisock
    </IfModule>
    # "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
        AllowOverride None
        Options None
        Order allow,deny
        Allow from all
    </Directory>
    # DefaultType: the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value.  If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    <IfModule mime_module>
        # TypesConfig points to the file containing the list of mappings from
        # filename extension to MIME-type.
        TypesConfig conf/mime.types
        # AddType allows you to add to or override the MIME configuration
        # file specified in TypesConfig for specific file types.
        #AddType application/x-gzip .tgz
        # AddEncoding allows you to have certain browsers uncompress
        # information on the fly. Note: Not all browsers support this.
        #AddEncoding x-compress .Z
        #AddEncoding x-gzip .gz .tgz
        # If the AddEncoding directives above are commented-out, then you
        # probably should define those extensions to indicate media types:
        AddType application/x-compress .Z
        AddType application/x-gzip .gz .tgz
        # AddHandler allows you to map certain file extensions to "handlers":
        # actions unrelated to filetype. These can be either built into the server
        # or added with the Action directive (see below)
        # To use CGI scripts outside of ScriptAliased directories:
        # (You will also need to add "ExecCGI" to the "Options" directive.)
        #AddHandler cgi-script .cgi
        # For type maps (negotiated resources):
        #AddHandler type-map var
        # Filters allow you to process content before it is sent to the client.
        # To parse .shtml files for server-side includes (SSI):
        # (You will also need to add "Includes" to the "Options" directive.)
        #AddType text/html .shtml
        #AddOutputFilter INCLUDES .shtml
    </IfModule>
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #MIMEMagicFile conf/magic
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://localhost/subscription_info.html
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall is used to deliver
    # files.  This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    #EnableMMAP off
    #EnableSendfile off
    # Supplemental configuration
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.
    # Server-pool management (MPM specific)
    #Include conf/extra/httpd-mpm.conf
    # Multi-language error messages
    #Include conf/extra/httpd-multilang-errordoc.conf
    # Fancy directory listings
    #Include conf/extra/httpd-autoindex.conf
    # Language settings
    #Include conf/extra/httpd-languages.conf
    # User home directories
    #Include conf/extra/httpd-userdir.conf
    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf
    # Virtual hosts
    #Include conf/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf
    # Various default settings
    #Include conf/extra/httpd-default.conf
    # Secure (SSL/TLS) connections
    #Include conf/extra/httpd-ssl.conf
    # Note: The following must must be present to support
    #       starting without SSL on platforms with no /dev/random equivalent
    #       but a statically compiled-in mod_ssl.
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>Is there anything else I need to add to this file. As I am trying to install ALUI and for this I need to add the plugin as when I go to my portal page none of the
    images shows. Any help is appreciated.
    Thanks

    Hi,
    There is patch for the webserver(Apache Plugin),thats needs to be downloaded from Metalink,dont use the default plugin that comes with the weblogic 10.3 installtion.
    Regards,
    Dinesh

  • Content search webpart in sharepoint 2013 paging is not not working for anonymous users on IE9, IE10 and Firefox

    Dear All,
     Issue in CQWP paging on IE9, IE10 and Firefox
    We have created CQWP in SharePoint 2013 for images rollup and its paging perfectly working for authenticated users on all browsers but it’s not working on public facing site for specific browser
     while we are trying to click on paging getting 
    something went wrong and correlation  with correlation id
    We did log analysis and getting different kind of problem description on every click some time contents authentications error, sometime memory
    Once I put webpart inside the  <!--MS:<ZoneTemplate>--> its completely stop working
      so we placed webpart outside  <!--MS:<ZoneTemplate>--> currently
    Strange point is its working on IE11. Please help us its highly appreciated
    Code Details :
    <div data-name="WebPartZone">
    <!--CS: Start Web Part Zone Snippet-->
    <!--SPM:<%@Register Tagprefix="WebPartPages" Namespace="Microsoft.SharePoint.WebPartPages" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"%>-->
    <div xmlns:ie="ie">
    <!--MS:<WebPartPages:WebPartZone runat="server" AllowPersonalization="false" ID="x5d2d1828b2b44612974f72caded2bcd3" FrameType="TitleBarOnly" Orientation="Vertical">-->
    <!--MS:<ZoneTemplate>-->
    <!--ME:</ZoneTemplate>-->
    <!--ME:</WebPartPages:WebPartZone>-->
    </div>
    <!--CE: End Web Part Zone Snippet-->
    <!--CS: Start Content Search Snippet-->
    <!--SPM:<%@Register Tagprefix="spsswc" 
    Namespace="Microsoft.Office.Server.Search.WebControls" Assembly="Microsoft.Office.Server.Search, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>-->
    <!--SPM:<%@Register Tagprefix="a2e8ead9d" 
    Namespace="Microsoft.Office.Server.Search.WebControls" Assembly="Microsoft.Office.Server.Search, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>-->
                            <!--MS:<spsswc:ContentBySearchWebPart runat="server" AlwaysRenderOnServer="False"
    ResultType="" NumberOfItems="12" DataProviderJSON="{&#34;QueryGroupName&#34;:&#34;Default&#34;,&#34;QueryPropertiesTemplateUrl&#34;:&#34;sitesearch://webroot&#34;,&#34;IgnoreQueryPropertiesTemplateUrl&#34;:false,&#34;SourceID&#34;:&#34;8413cd39-2156-4e00-b54d-11efd9abdb89&#34;,&#34;SourceName&#34;:&#34;Local
    SharePoint Results&#34;,&#34;SourceLevel&#34;:&#34;Ssa&#34;,&#34;CollapseSpecification&#34;:&#34;&#34;,&#34;QueryTemplate&#34;:&#34;path:\&#34;http://thepubauth.viacom.com/sites/vh1press/Shows/Show assets\&#34;
    PictureURL:\&#34;/sites/vh1press/Shows/Show assets/{Page.ID}/\&#34; (ContentTypeId:0x0101009148F5A04DDD49cbA7127AADA5FB792B00AADE34325A8B49cdA8BB4DB53328F214* OR ContentTypeId:0x010102*)&#34;,&#34;FallbackSort&#34;:[{&#34;p&#34;:&#34;LastModifiedTime&#34;,&#34;d&#34;:1},{&#34;p&#34;:&#34;Title&#34;,&#34;d&#34;:0}],&#34;FallbackSortJson&#34;:&#34;[{\&#34;p\&#34;:\&#34;LastModifiedTime\&#34;,\&#34;d\&#34;:1},{\&#34;p\&#34;:\&#34;Title\&#34;,\&#34;d\&#34;:0}]&#34;,&#34;RankRules&#34;:null,&#34;RankRulesJson&#34;:&#34;null&#34;,&#34;AsynchronousResultRetrieval&#34;:false,&#34;SendContentBeforeQuery&#34;:true,&#34;BatchClientQuery&#34;:true,&#34;FallbackLanguage&#34;:-1,&#34;FallbackRankingModelID&#34;:&#34;&#34;,&#34;EnableStemming&#34;:true,&#34;EnablePhonetic&#34;:false,&#34;EnableNicknames&#34;:false,&#34;EnableInterleaving&#34;:false,&#34;EnableQueryRules&#34;:true,&#34;EnableOrderingHitHighlightedProperty&#34;:false,&#34;HitHighlightedMultivaluePropertyLimit&#34;:-1,&#34;IgnoreContextualScope&#34;:true,&#34;ScopeResultsToCurrentSite&#34;:false,&#34;TrimDuplicates&#34;:false,&#34;Properties&#34;:{&#34;TryCache&#34;:true,&#34;Scope&#34;:&#34;{Site.URL}&#34;,&#34;ListId&#34;:&#34;00000000-0000-0000-0000-000000000000&#34;,&#34;UpdateLinksForCatalogItems&#34;:true,&#34;EnableStacking&#34;:true},&#34;PropertiesJson&#34;:&#34;{\&#34;TryCache\&#34;:true,\&#34;Scope\&#34;:\&#34;{Site.URL}\&#34;,\&#34;ListId\&#34;:\&#34;00000000-0000-0000-0000-000000000000\&#34;,\&#34;UpdateLinksForCatalogItems\&#34;:true,\&#34;EnableStacking\&#34;:true}&#34;,&#34;ClientType&#34;:&#34;ContentSearchRegular&#34;,&#34;UpdateAjaxNavigate&#34;:true,&#34;SummaryLength&#34;:180,&#34;DesiredSnippetLength&#34;:90,&#34;PersonalizedQuery&#34;:false,&#34;FallbackRefinementFilters&#34;:null,&#34;IgnoreStaleServerQuery&#34;:false,&#34;RenderTemplateId&#34;:&#34;DefaultDataProvider&#34;,&#34;AlternateErrorMessage&#34;:null,&#34;Title&#34;:&#34;&#34;}"
    BypassResultTypes="True" ItemTemplateId="~sitecollection/_catalogs/masterpage/Display Templates/Content Web Parts/DT_Images.js" GroupTemplateId="~sitecollection/_catalogs/masterpage/Display Templates/Content Web Parts/Group_Content.js"
    ResultsPerPage="9" SelectedPropertiesJson="[&#34;PublishingImage&#34;,&#34;PictureURL&#34;,&#34;PictureThumbnailURL&#34;,&#34;Path&#34;,&#34;Title&#34;,&#34;Description&#34;,&#34;SecondaryFileExtension&#34;,&#34;ContentTypeId&#34;]"
    HitHighlightedPropertiesJson="[&#34;Title&#34;,&#34;Path&#34;,&#34;Author&#34;,&#34;SectionNames&#34;,&#34;SiteDescription&#34;]" AvailableSortsJson="null" ShowBestBets="False" ShowPersonalFavorites="False"
    ShowDefinitions="False" ShowDidYouMean="False" PreloadedItemTemplateIdsJson="null" QueryGroupName="Default" RenderTemplateId="~sitecollection/_catalogs/masterpage/Display Templates/Content Web Parts/Control_ListWithPaging.js"
    StatesJson="{}" ServerIncludeScriptsJson="null" Title="Content Search" FrameType="None" SuppressWebPartChrome="False" Description="&#60;%$Resources:Microsoft.Office.Server.Search,CBS_Description;%&#62;"
    IsIncluded="True" ZoneID="ImportedPartZone" PartOrder="0" FrameState="Normal" AllowRemove="True" AllowZoneChange="True" AllowMinimize="True" AllowConnect="True" AllowEdit="True"
    AllowHide="True" IsVisible="True" DetailLink="" HelpLink="" HelpMode="Modeless" Dir="Default" PartImageSmall="" MissingAssembly="&#60;%$Resources:core,ImportErrorMessage;%&#62;"
    ImportErrorMessage="&#60;%$Resources:core,ImportErrorMessage;%&#62;" PartImageLarge="" IsIncludedFilter="" ExportControlledProperties="True" ConnectionID="00000000-0000-0000-0000-000000000000" ID="g_9f61c988_228e_4f91_8d67_04314f144f48"
    ChromeType="None" ExportMode="All" __MarkupType="vsattributemarkup" __WebPartId="{9f61c988-228e-4f91-8d67-04314f144f48}" WebPart="true" Height="" Width="">-->
    <!--ME:</spsswc:ContentBySearchWebPart>-->
    <!--PS: Start of READ-ONLY PREVIEW (do not modify)--><div ms-webpart-chrome-fullWidth "><div webpartid="00000000-0000-0000-0000-000000000000" haspers="true" id="WebPartWPQ1" width="100%" noindex
    " onlyformepart="true" allowdelete="false" ><div style="display: none;"></div><div componentid="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_csr"
    id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_csr" style="display: none;"></div><noscript>&lt;div id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_noscript"&gt;It
    looks like your browser does not have JavaScript enabled. Please turn on JavaScript and try again.&lt;/div&gt;</noscript><div id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48"><div><div
    id="WebPartWPQ2_ChromeTitle"><span title="" id="WebPartTitleWPQ2"><h2 style="text-align:justify;"><nobr><span></span><span id="WebPartCaptionWPQ2"></span></nobr></h2></span></div><div
    webpartid="00000000-0000-0000-0000-000000000000" haspers="true" id="WebPartWPQ2" width="100%" ms-WPBorder noindex ms-wpContentDivSpace " onlyformepart="true" allowdelete="false" ><div componentid="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_ctl00_csr"
    id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_ctl00_csr"><div id="DataProvider" name="Control"></div></div><noscript>&lt;div id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_ctl00_noscript"&gt;It
    looks like your browser does not have JavaScript enabled. Please turn on JavaScript and try again.&lt;/div&gt;</noscript><div id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_ctl00"></div><div></div></div></div></div><div></div></div></div><!--PE:
    End of READ-ONLY PREVIEW-->
    <!--CE: End Content Search Snippet-->
          </div>

    Hi,
    In the “Property Mappings” of the Content Search Web Part, we can see that the Picture field will only display the value retrieved from “PublishingImage;PictureURL;PictureThumbnailURL”,
    because there is corresponding column in OOTB Document Library holds the valid value of a thumbnail image for a document, that’s why documents from Document Library display no thumbnail image in a Content Search Web part.
    If you want to display thumbnail images for documents of Document Library, you can add a custom Picture column to hold the thumbnail image of a document, set the “Property
    Mappings” to display this custom Picture column.
    By doing this, every time uploading a document to this library, setting a thumbnail image(provided by common users, not generated by SharePoint automatically) for
    that custom Picture column, in the Content Search Web Part, the thumbnail image will display.
    Thanks
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for