Xperia Z3compact malfunction

I have a Z3 compact. I am tech illiterate. I am having all sorts of problems...for example..scrolling to find a number in contacts,,cannot select..scroll just takes over. Can't get to home page.get tons of What's New garbage. In WhatsApp and text messages, the back button stops working and every time I press it I get randomly generated words and purple streaks ( I have purple theme) zigzagging everywhere. Google stuff comes up al the time and can only get rid of it by switching off and on again. Can't scroll through calls made/rec'd and select..etc etc HELP!

Try performing a system repair as this will often fix issues after an upgrade, Bear in mind that this will factory reset your phone so backup any files you need to before proceeding
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the onscreen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

Similar Messages

  • Sony xperia z1 Compact Display Black/malfunction waterproof

    Hallo there,
    Got my z1 Compact about 1.5 montags ago. And Know my blood is boiling.
    As in the commercials i wanted to Take Some underwater pictures from my whalewatching Trip on the Philippiners.
    Still sceptic i Even Taped all possible areas where water could enter and yes i am Aware that the max.-depth Stated by Sony is 1-1.5 Meters ( 3-5.5 Ft). In fact we weren't Even allowed to Leave the boatside and descent for Even 1 Meter (3ft).
    Know for the malfunction. Took a couple of pictures for a period of less than 10 minutes. Back on the boat, i carefully dried it with a Towel and wanted to Check out the Pics. But the Display remained Black. Even though the touchscreen still was functional, as i felt the Vibrations touching it. I checked the Slots for any Water, but they were dry.
    So Tell me Sony, what went wrong????????????

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    It could have been that it was used in salt water whereas the IP rating is only for fresh water. However you would be best to speak with your local  Xperia Care team regarding having the handset assessed.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Xperia C walkman app malfunction

    Hi,
    I purchased a Xperia C series just  week ago. The walkman app does not play any music properly. The songs get stuck at any random point like a tape record. Is the phone I purchased defective?
    Thanks,
    Trisha

    Try settings-apps-all-walkman,clear data for both apps.Restart the device.
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Xperia Z keyboard malfunction

    Im having problems with the keyboard, seems to go off when I type like when im typing a word it goes berserk and types jibberish and sometimes goes on even if I try backspacing. I have to type really slowly and at times that doesnt help. Is there a way this can be sorted? Ive tried reboot, reset but no solution in sight. The phone isnt a month old. Should I take it back to the dealer?

    The extra film could be the issue
    You have 2 options
    1) do a software repair with SUS or PCC (re-install the latest update) 
    or 
    2) remove the extra film and test your phone 
    Update Service (SUS)
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Xperia Ray after ICS 4.0.3

    Hi!
    Yesterday I connected my RAY to PC companion for some backup, and notice that the new Android version 4.0.3. was available.
    I was expecting it, since we always like to have the latest features on our phones, so I did the update to the new version.
    The update went ok! No issues during the process.
    Few hour past since the update process and I already went from a great feeling of having a "new" RAY to the terrible feeling of wishing not to made the update. I believe that this is the worst feeling that  a costumer can feel about having a new release for its great phone.
    My RAY went from a great tool to a malfunction piece of high end technology.
    So I would like to share here, some of the "after ICS" issues I'm experiencing:
    1 - RING TONE VOLUME CONTROL:
    The ring tone volume control is now terrible. I'm not able to really low the volume. The volume goes lower from the top to the mute state, but the high is really high and the low is like middle in the previous 2.3. The level after mute, that should be lower and discreet is now very audible in a moderate noisy place, so I'm just using mute + vibe. Is its really bad. I test it with Audio Manager Pro, and different sound as ring tone, but I did not get any positive result. The volume control behaviour is OK for media and alerts sounds.
    2 - WIFI:
    Wifi is now a feature that i can't get it to work. All my previous stored Wifi hotspots are now dead, even after edit each one.
    I try to store the same hotspots from a fresh search and I still can't get them to work. All the Wifi spots I have stored are working perfectly and no setting was changed, so the issue I'm getting is from the RAY.
    3- GALLERY (now XPERIA GALERIA):
    The gallery crashes very often, mostly on landscape position and during swipe trough photos. After the update, I can only see 4 to 6 photos of each album before it crashes and returns to gallery root folder or phone main menu.
    4 - MULTIMEDIA shortcuts widget:
    There is a problem with the MULTIMEDIA shortcuts widget, since it almost doubled the space it takes on the screen. Actually the visual size of this widget is just fine, the problem is the area around it that is oversized.
    5 - THE PHONE:
    Making or answering a call is now a trouble... and this is the major purpose of this equipment...
    The phone freezes very often while receiving a call and takes too long (sometimes more than 10 second) to open the phone feature. Sometimes it crashes while trying to open the phone feature and there's is the need to take battery out (since yesterday... happen twice).
    6- OVERALL
    The new android version for this model is pretty, but there are several issues to be solved. Along with the ones I believe are really serious, I'm experiencing a great decrease in phone performance. Screen animations between pages and menus are now almost imperceptible and the ones that still exist are not fluid (jumps, like a low frame rate on a video footage), moving from a page to another is now slower and jumpy and feels like I own a first generation Android phone with low tech capabilities. Scrolling is now different too. It is slower, and the acceleration is not so great like in previous 2.3
    7- MEMORY
    The available RAM is now lower than when I had 2.3... and i did not have more apps working... at least I did not start them. So he new 4.0 must gave some more processes running, I believe.
    8 - SCREEN FLASHES RED AND GREEN (added on April 27)
    RecentlyI found another "not so bad, but annoying issue".
    Sometimes, the screen flashes fully red or green for a second, during:
    Menus swipes, camera access, skype camera change (from rear to front and vice versa), when Draw something app loads, and browser opens...
    So, here is my "less than 24hours" Xperia"ence" with the ICS for RAY... Not happy with it and looking forward to see it solved, or to roll it back to 2.3.
    If there is no visible solution for this and many other issues, this will probably be my last SE phone, from a long and solid history with this brand.
    Kind regards and best wishes  to everyone.
    Bruno
    Message was edited by: Zamzibar

    Hi ply17410,
    Thank you very much for your contribution!
    The RAY I own is the ST18i purchased as a standalone mobile, no carrier dependant.
    I'm using a portuguese Vodafone SIM card and these are my RAY's unit versions:
    Phone software version: 1248-9545_4.1.A.0.562,
    Boot version: 1241-3656 R9A028,
    Customization version: 1252-0929_R20D
    File system version: WORLD-i_4.1.A.0.562
    No SIM lock applied, and bootloader unlock allowed.
    The wifi issue is getting worst, right now I can only access web via 3G data connection.
    Bluetooth works fine for audio and data transfer.
    Today I found another "not so bad, but annoying issue".
    Sometimes, my screen flashes fully red or green for a second, during:
    Menus swipes, camera access, skype camera change (from rear to front and vice versa), when Draw something app loads, and browser opens...
    Kind regards,
    Bruno
    Lisbon, Portugal

  • Xperia Z1 keeps shutting down does not restarts,and automatically stops and starts charging randomly

    My Sony Xperia Z1 keeps shutting down due to high temperature even though its not overheated, or i am not running any app. It does not restarts even after i give it some time to cool down as it soon again displays the same messege (SHUTTING DOWN DUE TO HIGH TEMPERATURE), then when i connect a charger it automatically starts charging and discharging (even though if the charger is connected and ON) the cell phone
    I request you to kindly look into the matter, expedite the situation and suggest me any possible solution asap
    also i would request you to not to release any OS updates unless they are fully stable and functional, i have bought this device 6 months back and it has already malfunctioned 3 times which is a serious concern. I cannot keep on updating and repairing my cell phone after every month or so which i feel is very irritating.
    Please stop treating these devices as developers guinea pigs

    I suggest that you try to repair the phone software using PC Companion..
    Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
    How to backup?
    If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Xperia z1 Getting automatically switched off

    I purchase 10 days back Xperia Z1, the day one withing few hours itself the camera does'nt open, and reflects as application not find, It occurs couple of time, then i thought it is due to soft malfunction then i upgraded to Kitkar 4.4.4
    Now the same occurs today and suddenly the phone swithced off automatical stating due to high temperature, It happens more than 15 -20 times then switched on for some time but not entering into setting since it aske security password..???
    Again it got swithced off...
    It totaly disappointed 30 k product gives statrted to mal function from day 1 and further detroited in 10 days....
    I was using sony protext since 2011 beleived on sony I bought this now this is the fate....
    Can I get any solution from the Sony Xperia team...
    Awating with a great hope...

    safe mode
    http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
    on safe mode check if the phone gets that hot, also are you constantly syncing and/or streaming music, videos, playing video games, etc?
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Malfunctions!

    I've had my phone for a couple months now and have noticed several malfunctions, some more serious than others. The first was my alarm clock - I use my phone on a daily basis to get up for a work and after a week the option to turn off the alarm wasn't appearing. I tried everything, and the only thing that turned it off short of turning the whole phone off was to open my recent apps and close all. I think this may only be when my phone is plugged in to charge but I haven't tried using the alarm when it's not on charge.
    The second thing was Facebook videos. This has been widely experienced and is very annoying, but I've found that if you persevere and keep opening the video it eventually plays.
    The third thing is overheating - I know most people experience it when using the camera but mine has never reached the point where it shuts down due to heat (however it has randomly shut itself down once or twice for absolutely no reason). It also doesn't tend to overheat on camera, but when I'm using the sat nav services from Google maps. I'm assuming it's because of the heavy processing power required to use gps for such a length of time, but my phone was at one point too hot to touch. I haven't found a solution to this yet.
    The final and most concerning glitch happens randomly and I struggle to get out of it. Its difficult to describe but my screen starts act of its own accord, imagine if I was tapping random places very quickly. It switches between screens uncontrollably and acts as if I've held an app on the home screen and starts rearranging my apps. The only way to stop it is to turn the phone off but when I press the power button, because of the random tapping, the option to shut down disappears very quickly and I have to be really quick to catch it. It's annoying and actually terrifying as it feels like my phone is haunted. The phone isn't particularly hot when it happens, and it's happened both when on charge and when not. I'm starting to think I need to get a replacement model as I feel like this phone is bugged to **bleep**!
    Desperate to find someone with similar problems and/or a solution. It was an expensive phone and it's been nothing but a pain in the neck.

    The screen issue IS dirt and moisture.  I am unable to use the Xperia Z2 during any physical activity that makes me sweat, because even the slightest bit of dirt and moisture on the screen registers as a touch.  I also have a screen protector on mine.
    The overheating issue is a known flaw with the phone since before it went on the market.
    For Facebook, you have to go in at least once a day and clear data to get videos to work.
    Not sure about the alarm clock issue... all I can say on that one is "Welcome to Android"
    Yes, I can sympathize with your frustration.  This phone has been a major disappointment.  I should've waited for the G3

  • Xperia z3 screen

    All of a sudden my 2 week old Xperia z3 started malfunctioning. It is as if the touch screen can't register my touches but starts to register ghost touches and opens all sorts of apps and setting by itself. So it means I can't access anything on the phone to reset. Is there a way to fix this or is it a faulty phone?

    You may need to perform a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
    Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
    Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems n

    Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer.  I have a pretty simple system with only a few plug-ins, which are usually not in operation.  I have 12GB of RAM in my Windows 7 PC.  I could illustrate these problems with screen shots if you would tell me how to submit screen shots.  Otherwise I will try to describe the problems in words.
    The problem is clearly cumulative, growing worse as usage time passes.  Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond.   In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces  (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
    To experiment I created a new catalog of 1100 images.  After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size  images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
    I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data.  (I have a screen shot to show this.)  CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
    Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong.  I could also send screen shots of this data.
    At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR.  This is not normal.  I hope you can find the cause, and then the solution.  If you would like to see my screen shots, tell me how to submit them.
    Ollie
    [email protected]

    Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer.  I have a pretty simple system with only a few plug-ins, which are usually not in operation.  I have 12GB of RAM in my Windows 7 PC.  I could illustrate these problems with screen shots if you would tell me how to submit screen shots.  Otherwise I will try to describe the problems in words.
    The problem is clearly cumulative, growing worse as usage time passes.  Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond.   In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces  (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
    To experiment I created a new catalog of 1100 images.  After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size  images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
    I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data.  (I have a screen shot to show this.)  CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
    Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong.  I could also send screen shots of this data.
    At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR.  This is not normal.  I hope you can find the cause, and then the solution.  If you would like to see my screen shots, tell me how to submit them.
    Ollie
    [email protected]

  • Blue Screen of Death and USB malfunctions on HP Envy running Windows 7

    Hello.
    I have an HP Envy 14 notebook PC. It's running Microsoft Windows 7 Home Premium 64-bit, version 6.1.7601. When I run it, I eventually starts getting an error message from the right of the desktop toolbar telling me that a USB device I plugged in is malfunctioning and did not get installed correctly. This is happening while my USB ports are empty.
    As this is happening, the computer also starts playing background static that you can hear over headphones as well. This sound goes away once you mute the machine. After plugging the computer into a monitor to play sound through its speakers, there is also a curious effect; after I remove all the cords and plug in earphones, I hear amplified booming sounds from small movements, rather than what is meant to be playing. This latter effect goes away once I restart the computer,
    Eventually, the computer displays a blue screen and crashes. The blue screen asks me to disable BIOS memory options such as caching and shadowing. Once the machine restarts, it informs gives me the following report:
    Problem signature:
      Problem Event Name:    BlueScreen
      OS Version:    6.1.7601.2.1.0.768.3
      Locale ID:    1033
    Additional information about the problem:
      BCCode:    fe
      BCP1:    0000000000000008
      BCP2:    0000000000000006
      BCP3:    0000000000000005
      BCP4:    FFFFFA800A8577A0
      OS Version:    6_1_7601
      Service Pack:    1_0
      Product:    768_1
      Files that help describe the problem:
      C:\Windows\Minidump\021212-92680-01.dmp
      C:\Users\Kristina\AppData\Local\Temp\WER-187341-0.sysdata.xml
    It also gives me the option to check for solutions. Doing so closes the screen and gives no further information. Please advise as to how to address these issues.

    I have the same issue you have had. This happend to my old hp, I thought it was a fluke so when I bought my new hp envy a year ago I was dumbfounded to see that its happening all over again. This time my hp envy 14 is doing the same thing yours did with the same code and all. Can you please tell me what you did to fix this or were you even able to fix it at all?

  • IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"

    Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.

    I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!

  • I forgot pattern lock on my Sony Xperia Z1 and i need it back

    Hello,
    on my sony xperia z1 phone i forgot my pattern lock. I can't use the Forgot Pattern Lock because it uses Wifi conection which i can't connect to...(my screen is locked) I want to hard reset it somehow but i tried allmost every method on the internet but none of them were working I tried holding the volume up and these things....but as i said it won't work for me. Can anyone please help me? THANK YOU VERY MUCH

    In order to fix this you need to perform a system repair
    Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
    Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the onscreen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
    If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.

    Anything known on this issue? Solutions? Even importing files from memory card is a problem.
    In import window images are not diplayed as images but all the same blue mini images.
    vertical files are changed into landscape positions and more. Mac version.
    cj de vries

    Op 12 apr. 2014, om 19:27 heeft Yammer <[email protected]> het volgende geschreven:
    Re: Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.
    created by Yammer in Bridge General Discussion - View the full discussion
    http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6292450#6292450
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6292450#6292450
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6292450#6292450. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Bridge General Discussion at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
    THNX Problem solved

  • IPhone malfunctioning while incoming calls

    Hi Everyone,
    Recently whenever I get incoming call suddenly music player turns ON.
    Also sometime when I'm listening to music, song shuffle itself.
    It's really bad experience with apple.
    Voice control turned off.
    Songs shuffle turned off.
    Please let me know is there any malfunctioning in my iPhone or is there any settings need to be changed (recently I havn't changed anything)
    Thanks,
    Sri

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Appel logo comes back again? You will not lose data by resetting.
    If this does not work, set it up as new device again, explained here:
    How to back up your data and set up as a new device

Maybe you are looking for