Xsd for returning the html

I am new to BPEL. I have the current process that returns the xml. I have the requirement to return the html as response. Basically html is also xml. I am trying to utilize the Transform activity and return the response as html. I have tried to use the xsd @ http://www.w3.org/2002/08/xhtml/xhtml1-strict.xsd. I am getting issues with xml namespace. Let me know if I am moving in the right direction of downloading the xhtml @ http://www.w3.org/2002/08/xhtml/xhtml1-strict.xsd and adding to the project and try to return the response based on the same. Else do I need to write custom xsd that matches the html output that I am planning to return?

Similar Messages

JSP tag for reducing the html output

Hello,
I was wondering if there was a jsp tag that reduce the html output of the jsps. I have tried trimfilter the idea is great but at my project filters should be a subclass of one class that i cant edit.
Thanks for all advices.

Instead of this<html>
     <body>
          Hello World
          
     </body>
</html>This would be better.<html><body>Hello World</body></html>Edited by: mehmetcadirci on Jul 17, 2010 1:19 PM

Process for Returns the goods to vendor

Hi All
Can any body please guide me in the below Returns process:
1) Goods returned from the customer and placed in to returns storage loaction, then to perform the returns process to vendor for the goods which are at returns S Loc.
2) Goods recieved from vendor and performed Quality check and found goods are in damage condition then posted to blocked stock to take the decession about the stock.Decession has been made to return ths stock to vendor then the Stock from Blocked Stock has to be returned to vendor.
Regards,
Laxmi

Hi,
Point No 1 -
You can post the delivery with reference to PO in MIGO transaction using Mvt type - 122
OR can create PO with return tick with Mvt type - 161.
If you choose to post W.R.T PO,You can post substitute delivery W.R.T. return delivery document by using reverse posting with Mvt type - 123.
Point No 2 -
Here now you have posted the stock into block stock.
You can post the return using movement type 124 - return delivery from goods receipt blocked stock.
you can reverse the rweturn delivery doc to post the substitute delivery again into block stock.Finally move the stock to unrestricted using 105.
Hope this helps.
Vivek

Modifying the HTML files for a service

Hi All:
We are in SAP R/3 4.6c and EP 6.0. We will be using the standalone ITS for our ESS Services.
We would like to modify the standard delivered service for edit skills - PZ31_EWT.
What is the procedure for modifying the HTML files. Where can we see the HTML files associated with a service ?
Is it on the ITS side or via SE80?
Thanks
Rachel

Hi Rachel,
You've just about reached the limits of what I know about changing ESS ITS services I'm afraid.
I didn't see PZ31_EWT listed under Internet services either so Im guessing the ITS service PZ31 name remains unchanged. If you double click on the top level folder in the tree, called PZ31, the details of the ITS service are displayed. Its not obvious that you can do this as it just looks like a folder, but if you do and select the Parameters tab you can see if lists TRANSACTION=pz31 and WEBTRANSACTIONTYPE =EWT which sounds suspiciously similar to what you were expecting.
You could test this by putting some text in the PZ31 HTML template, publishing, and checking it is displayed.
You can (copy and) modify the templates with straight HTML and the Business HTML macro language, which is a bit of a black art but you can access the help via the 'Business HTML overview' button on the toolbar.
I found a sentence in my handover notes from an ESS guru that reads 'Customization to ESS page layout are not easily done. You need to copy and modify the ITS service and edit the business HTML templates'.
The only other way I know to modify ESS is through the SPRO transaction.
Thats about all I can tell you about ESS Im afraid!
Cheers,
Steve

Can't get the HTML for My iTunes widgets

Couple of things.
My iTunes:
I have enabled the My iTunes (Purchases, Favorites and Reviews). However, when I click the "Get HTML" buttons, I'm taken to the web page for getting the HTML. The image states that I haven't enabled My iTunes. Nothing that I have tried is working. Any ideas?
Searches:
The query handling when searching for topics doesn't actually work correctly. I searched for the string "My iTunes" and got 329 results, with every result on the first 4 pages (I stopped after looking at the first 40) were based on having "iTunes" in it. The results were not limited by the phrase "My iTunes". So, if there is a solution to this, the query results aren't providing information that makes it easy to find the right answers.
Thanks much,

Hello Jay Hill
If the steps below are what you went through. You may wish to sign out of your iTunes account, sign back in, and attempt to get HTML code, if it still does not work, Uncheck all 3 boxes in your account and apply the info. So it shows that you need to enable the service. Enable it again by checking proper boxes.
Also if you have not done so download the latest iTunes below
http://www.apple.com/itunes/download/
1. Launch iTunes
2. In the iTunes menu bar click on Store - Sign into account if needed otherwise choose view my account. If you have to sign in, go back to same spot then choose view my account
3.On the Apple Account information page near the bottom you will see something called My iTunes, and on the right hand side a button called Enable My iTunes.
Once you press this will you be given information to read and a box to check and agree to. Then click continue.
From there check all the applicable boxes that interest you. Once the boxes are checked, each one will offer a Get HTML Code, Press done in iTunes when you are finished. Feature should now be enabled.

Change the HTML page

Ok! I understand that Adobe muse is just for people who doesn't have any knowledge HTML code, but could be a good idea to view an advance tools for adobe muse like for change the HTML code. This is pretty important to make a good optimitation on Google (Structured data).

Anonymous - There was a post today that answers a question that might be the one you are asking: Changing the Home Page (Home Link)
Scott

Why the HTML copy when creating Flash?

Just started working with Flash and I noticed when I publish
a page that I'm working on Flash creates a HTML version as well.
What I am working on will be placed within an existing site which
is all html. Not sure the reason for the additional html page and
what to do with it. Sorry if I'm a bit dense about this but ya
gotta start somewhere.

as to what would be used for? the HTML? It provides the tags
for proper display of the SWF. From the
help docs:
To display a SWF file in a web browser, an HTML document must
use the object and embed tags with the
proper parameters.
Playing Flash content in a web browser requires an HTML
document that activates the SWF file and
specifies browser settings. The Publish command automatically
generates this document, from HTML
parameters in a template document.
The template document can be any text file that contains the
appropriate template
variablesâincluding a plain HTML file, a
file that includes code for special interpreters such as
ColdFusion or Active Server Pages (ASP), or a template
included with Flash.
To manually enter HTML parameters for Flash or customize a
builtâin template, use an HTML editor.
HTML parameters determine where the content appears in the
window, the background color, the size of
the SWF file, and so on, and set attributes for the object
and embed tags. Change these and other
settings in the HTML panel of the Publish Settings dialog
box. Changing these settings overrides
options youâve set in the SWF file.
just search help docs (F1) for "Using object and embed tags"
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->
westlight wrote:
> Thanks. Still reading on as to what it would be used
for. Just for positioning and layout info?
>
> Back to the tutorials, and the Flash for Dummies book.

Using javascript to dynamically generate the html for a Spry table

I have some javascript which generates html code for a Spry
table which displays the content of a Spry data set. The problem is
that after I generate the html, Spry never fills in the values for
the table.
Here's what I'm doing:
Using a data set observer, check for onPostLoad and generate
the html code
Using innerHTML, stuff the code into the appropriate
<div>
Use regionName.updateContent() to update the region I just
created with the html code I generated
Interestingly, if I take the generated source for my page and
remove the data set observer, the Spry table displays correctly
with all the expected values. This suggests to me that my generated
html code is correct, but that there is some sort of timing issue
(i.e. Spry doesn't know about the new code I generated).
Any suggestions?

jalperin wrote:
> Here's what I'm doing:
>
Using a data set observer, check for
onPostLoad and generate the html
> code
>
Using innerHTML, stuff the code into
the appropriate <div>
>
Use regionName.updateContent() to
update the region I just created
> with the html code I generated
>
> Interestingly, if I take the generated source for my
page and remove the data
> set observer, the Spry table displays correctly with all
the expected values.
> This suggests to me that my generated html code is
correct, but that there is
> some sort of timing issue (i.e. Spry doesn't know about
the new code I
> generated).
>
> Any suggestions?
I'd guess that it is a timing issue as well. I haven't looked
much at the dataset capability in Spry, but it may be that the
dataset "finds" all of the regions and code that it applies to
before the onPostLoad event is triggered. If that is the case, then
your generated code doesn't exist yet,and so the dataset thinks
that there is nothing for it to apply to.
Will the HTML that you generate change based upon the dataset
that is actually returned? I guess I'm looking for the reason why
the HTML is being generated when it could be in the page itself and
avoid this issue completely.
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert

How can servlet return the output as html content with drawing picture?

Does anybody know how can a servlet return the output as html content with drawing picture?
The drawing picture is drawn at runtime by the servlet.

Thanks, BalusC.
But I am not sure if I understand your reply fully.
From my understanding, you are telling me to first generate a html from a servlet with the image <IMG> tag pointing to a servlet which will be responsible to generate an image?
For example, <IMG SRC="http://myserver/servlet/testservlet">
Could you confirm this?

Returning a html status code to the client browser

Hi,
Can anyone help me with a problem that I am have with regard to returning a html status code of NO_CONTENT to the client browser?
The Problem:
Basically I have a html form with a SAVE button. When the user clicks the SAVE button the data in the form is sent to the web server which then saves it in a database and the same populated form is then sent back to the client. From the users point of view they click the SAVE button and the screen is refreshed with the same data. The problem with this is that the data only needs to be SENT to be saved but not necessarily resent back to the client browser from the server i.e. from a user's point of view I don't want the screen to refresh by disappearing and then coming back again. There is a lot of data in the form so this refresh can take a considerable amount of time as the html can take a while to download.
The Potential Solution:
What I want to do is send the data to the server where it will be saved in the database and then return a html status code of NO_CONTENT to the browser (always Internet Explorer) so that the page doen't get refreshed / downloaded unnecessarily. I've implemented this and the save can now take as little as 10% of the time it used to take because the data is only sent and not received again.
The problem with the potential solution:
It works fine most of the time but not all of the time. We tested this change and it worked great but when we released it live it didn't work for some people. For most people you can see the status bar at the bottom of IE zip along as the data is sent to the server so you can see when it has finished or received the status code back. For the people it didn't work for they would get an almost full status bar at the bottom but the blue would never quite disappear to indicate that it was finished. It was as if it was sending the data from the server but not getting a response at all when it should have been getting the NO_CONTENT status code.
The Code:
I'm using Struts so the line of code I had originally used after the data had been saved to the database was:
     return (mapping.findForward("timesheet"));
I changed this line of code to:
     response.setStatus(response.SC_NO_CONTENT);
     response.flushBuffer();
     return null;
Can anyone see what the problem is here? Are the new lines of code not guaranteeing that the response is being sent back to the client? Is there a better way to simply return a status code when you don't want return a JSP page?
Any help would be greatly appreciated.
rgds,
Dave

I see what you mean now. It's a very good idea but it wouldn't really work for this application. I've taken out the ability to use "back" functionality on this screen. It is launched through javascript so that the window itself has no toolbar and also the page is set to expire so that if you do go "back" to it, you are forced to refresh the page so that it is guaranteed to have the same data as is on the server. This is needed to stop problems with other functionality of the application.
Thanks for the suggestion though.
Does anyone know why this code only works most but not all of the time?:
response.setStatus(response.SC_NO_CONTENT);
response.flushBuffer();

HT4864 I am getting a triangle with an exclamation point next to my inbox...it says: There may be a problem with the mail server or network. Verify the settings for account "MobileMe" or try again. The server returned the error: Mail was unable to log in

I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailable

Also if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.

I am a customer Verizon customer of over ten years...I am notgettingany assistance from the customer service department. Since September I am being charged for a Samsung phone that I returned based on the process that verizon has set.return the defective

turn my phone to send Verizon wireless and those instead of the stuff found. I'm not in charge $600 for the for the phone. I'll talk to multiple customer service reps and nothing has really been done about anything other then we'll keep looking or so for stretching it out. since September I've been dealing with thison a month-to-month basis they cut my services they reinstate me and tell me that they're going to knock off the reconnection charge as I have four lines. Unfortunately my main reason for this phone is my work emails which I need to do because I do work and to contact my mother who is 85 years old and I'm the sole caregiver. I don't know what else to do. I have spoken to a supervisor by the name of William or Will oats in that he said he was going to look into it and was going to help me out. Never heard from him again- just original email to quiet me down. I've been sending him emails just about every day trying to make sure that I get my message across. Seems like Verizon Wireless really doesn't care about the long-term customers. Looking forward to hearing from someone that can help me with my plight.process is faulty for returns. You don't accept them in the stores because as one customer service rep stated you can't get your own employees to send the devices back. Now the responsibilities is on the customer the paying customer the one that keeps you alive. And it's not fair that I there's no way I can prove that I put it in the mailbox. So what are my next stepswhat is it that I need to do to clear up this charge of $600. It's about economy as $600 to me at this very point it's a lot of money. I've been your customer for 10 years I've got four lines I've given will my mothers telephone number home number..number but now she's got to sit by the phone to make sure that she picks up all the calls. And nobody can hear what I have to sayand nobody has been able throughout all these months and check your notes check your notes to see how many times I've called how many time you cut my services how many times you reinstated me and how many times that I spent an hour and a half to two hours on the phone going through this process. I think the stress level is to know thqt I did exactly what you asked...I am now paying the price for your faulty process I'm all I'm asking is review my account tell me what I did wrong I follow your procedure so I don't understand....to top it off...my wife hasa per diem job...and she too is affected by loosing out on work leads...
as you can see, the cel is no longer a commodity. It's a way of life.
PLease se call me at -----just remembered....I don't have a service line.

I have a similar problem with my fathers service, it wasns't $600 but what is rightfully your money, you deserve it back, I wrote this complaint on the Consumer Affairs website:
In August 2014, my son went to Target to get a new cell phone and was told his Unlimited Data would still be on his plan (he shared a line on his grandfathers account). Well it turned out that Target messed it up and my son immediately called Verizon to get it taken care of but they were not able to do anything about the lost unlimited data but the customer service rep did try to find the best offer for him. In the mean time Verizon was suppose to send him a new cell phone, they never sent it and he was without a phone so he took his business to another cell provider. Verizon DID charge him for the new service that they had spoke about. So when the new bill (Sept) came, the service he never used was on the bill and when we called to inquire about it we spoke to a Judy and told us we would be receiving a credit of the amount that was paid. Well, we got the next months bill (Oct) and still no credit, so called them again and spoke to a Nadine ** . She looked into the account and saw the amount that was paid and said she would submit it again for a credit and she would get back to me in 2 days, no call back.
The next bill (Nov) came and no credit again, call again but didn't get the girls name and she put me on hold to look over the previous conversations. She said she sees in the records about the credit and said it takes a while to get it thru the supervisor authorization and she would put it in as a "rush priority". On Dec. 5th my dad's cell was turned off, so I call yet again to Verizon, and explain the whole story to them again. This girl explained to me that the request was not put in correctly and that she would submit it right this time, they even turned the cell back on for him.
So here we are today, Dec. 30, 2014, I get the bill...NO CREDIT, call up and get a gentleman in billing, explain this whole thing again and he transferred me over to customer service where I spoke to a Jordan and yet again told him the story. By this time I was fuming, 3 almost 4 months of calling for this credit and he looks into the account and tells me there is nothing that states there is a credit so all the other customer service reps see it but now it is gone. He said he can only issue me a $25 credit to the bill, not even close to what the bill was that I paid. At this point I wanted to speak to a Supervisor and even that was a problem.
He did call me back after my phone died. He put me on hold again to speak to a supervisor himself and said that he can only offer me $100 credit for all my troubles for the past few months. I took the $100 credit because Jordan said if I spoke to the supervisor, the $100 credit might not be an offer anymore so it was either take it or leave it. Now where I stand, they get away with NOT giving the credit due to customers. I am done with Verizon.
today being March 12, 2015, he FINALLY got the said $100 credit...but because of their delay, he service was shut off and I refuse to pay the reconnection fee due to their neglect of a customer of over ten years. My father's service will NO longer be with a place that has NO VALUE in customer service....Verizon robs their customers anyway they can.

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions a

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions are for the computer to read. Both formats are, of course, readily recognized and indexed by Spotlight. Journal articles have two essential components with regards to a database: the topical content of the article itself, and the cited references to other scientific literature. While a PDF merely lists these references, the HTML version has, in addition, links to the cited items. Each link URL contains the digital object identifier (doi) for the item it points to. A doi is a unique string that points to one and only one object, and can be quite useful if rendered in a manner that enables indexing by Spotlight. Embedded URL's are, of course, ignored by Spotlight. As a result, HTML-formatted articles must be processed so that URL's are openly displayed as readable text before Spotlight will recognize them. Conversion to DOC format using MS Word, followed by conversion to RTF using Text Edit accomplishes this, but is quite labor intensive.
In the last few months, I have added about 3,500 articles to this collection, which means that any procedure for rendering URL's must be automated and able to process large batches of documents with minimal user oversight. This procedure needs to generate a separate file for each HTML document processed. Trials using Automator's "Get Specified Finder Items" and "Get Selected Finder Items", as well as "Ask For Finder Items" (along with "Get URLs From Web Pages") give unsatisfactory results. When provided with multiple input documents, these three commands generate output in which the URLs from multiple input items are merged into a single block, which yields a single file using "Create New Word Document" as the subsequent step. A one-to-one, input file to output file result can be obtained by processing one file at a time, but this requires manual selection of each item and one-at-a-time processing. What I need is a command that accepts multiple input documents, but processes them one at a time, generating a separate output for each file processed. Is there a way for Automator to do this?

Hi,
With the project all done, i'm preparing for the presentation. Managed to get my hands on a HD beamer for the night (Epason TW2000) and planning to do the presentation in HD.
That of course managed to bring up some problems. I posted a thread which i'll repost here . Sorry for the repost, i normally do not intend to do this, but since this thread is actually about the same thing, i'd like to ask the same question to you. The end version is in AfterEffects, but that actually doesn't alter the question. It's about export:
"I want to export my AE project of approx 30 min containing several HD files to a Blu Ray disc. The end goal is to project the video in HD quality using the Epson EMP-TW2000 projector. This projector is HD compatible.
To project the video I need to connect the beamer to a computer capable of playing a heavy HD file (1), OR burn the project to a BRD (2) and play it using a BRplayer.
I prefer option 2, so my question is: which would be the preferred export preset?
Project specs:
                    - 1920x1080 sq pix (16:9)
                    - 25 fps
                    - my imported video files (Prem.Pro sequences) are also 25 fps and are Progressive (!)
To export to a BRD compatible format, do i not encounter a big problem: my projectfiles are 25 fps and progressive, and I believe that the only Bluray preset dispaying 1920x1080 with 25 fps requests an INTERLACED video (I viewed the presets found on this forum, this thread)... There is also a Progr. format, BUT then you need 30 fps (29,...).
So, is there one dimension that can be changed without changing the content of the video, and if yes which one (either the interlacing or the fps).
I'm not very familiar with the whole Blu-ray thing, I hope that someone can help me out."
Please give it a look.
Thanks,
Jef

[svn] 3120: When you point Flex Builder at a local sandbox trunk build, it couldn' t generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build

Revision: 3120
Author: [email protected]
Date: 2008-09-05 10:44:10 -0700 (Fri, 05 Sep 2008)
Log Message:
When you point Flex Builder at a local sandbox trunk build, it couldn't generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build.xml's to accommodate the directory change
Modified Paths:
flex/sdk/trunk/build.xml
flex/sdk/trunk/webapps/webtier/build.xml
Added Paths:
flex/sdk/trunk/templates/client-side-detection/
flex/sdk/trunk/templates/client-side-detection/AC_OETags.js
flex/sdk/trunk/templates/client-side-detection/index.template.html
flex/sdk/trunk/templates/client-side-detection-with-history/
flex/sdk/trunk/templates/client-side-detection-with-history/AC_OETags.js
flex/sdk/trunk/templates/client-side-detection-with-history/history/
flex/sdk/trunk/templates/client-side-detection-with-history/history/history.css
flex/sdk/trunk/templates/client-side-detection-with-history/history/history.js
flex/sdk/trunk/templates/client-side-detection-with-history/history/historyFrame.html
flex/sdk/trunk/templates/client-side-detection-with-history/index.template.html
flex/sdk/trunk/templates/express-installation/
flex/sdk/trunk/templates/express-installation/AC_OETags.js
flex/sdk/trunk/templates/express-installation/index.template.html
flex/sdk/trunk/templates/express-installation/playerProductInstall.swf
flex/sdk/trunk/templates/express-installation-with-history/
flex/sdk/trunk/templates/express-installation-with-history/AC_OETags.js
flex/sdk/trunk/templates/express-installation-with-history/history/
flex/sdk/trunk/templates/express-installation-with-history/history/history.css
flex/sdk/trunk/templates/express-installation-with-history/history/history.js
flex/sdk/trunk/templates/express-installation-with-history/history/historyFrame.html
flex/sdk/trunk/templates/express-installation-with-history/index.template.html
flex/sdk/trunk/templates/express-installation-with-history/playerProductInstall.swf
flex/sdk/trunk/templates/metadata/
flex/sdk/trunk/templates/metadata/AC_OETags.js
flex/sdk/trunk/templates/metadata/readme.txt
flex/sdk/trunk/templates/no-player-detection/
flex/sdk/trunk/templates/no-player-detection/AC_OETags.js
flex/sdk/trunk/templates/no-player-detection/index.template.html
flex/sdk/trunk/templates/no-player-detection-with-history/
flex/sdk/trunk/templates/no-player-detection-with-history/AC_OETags.js
flex/sdk/trunk/templates/no-player-detection-with-history/history/
flex/sdk/trunk/templates/no-player-detection-with-history/history/history.css
flex/sdk/trunk/templates/no-player-detection-with-history/history/history.js
flex/sdk/trunk/templates/no-player-detection-with-history/history/historyFrame.html
flex/sdk/trunk/templates/no-player-detection-with-history/index.template.html
Removed Paths:
flex/sdk/trunk/templates/html-templates/

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

Error occurred in deployment step 'Uninstall app for SharePoint': The remote server returned an error: (502) Bad Gateway.

Installed SP 2013 Foundation in my Hyper-V machine
Created and done all the steps mentioned here http://blogs.msdn.com/b/shariq/archive/2013/05/07/how-to-set-up-high-trust-apps-for-sharepoint-2013-amp-troubleshooting-tips.aspx && http://msdn.microsoft.com/en-us/library/office/fp179901%28v=office.15%29.aspx
for self signed certificate
copied those two certificates in my local machine(base machine) D drive
(D:\Cert)
Both VM and base machine are in same domain
Installed VS 2013 in my base machine and create a Provided hosted app with the copied certificates, (For creation i followed the above mentioned URL)
Just created and hit F5 to run in my base machine, but getting this error
Error occurred in deployment step 'Uninstall app for SharePoint': The remote server returned an error: (502) Bad Gateway.
Please help me to resolve this issue, trying to figure out from last 2 days
Thanks in Advance
Arun

Hi Harminder,
This happens because an app has already been deployed and you are deploying it again using the same version.
Resolution:
Open the AppManifest.xml file and change the version.
Vivek Jagga - MCTS SharePoint
SharePointExcellence

Xsd for returning the html

Similar Messages

Maybe you are looking for