XSL transformation in OSB

Hi all,
I am new to OSB. I am having trouble to understand how to do XSL transformation in OSB.
I have created a business service which targets wsdl with a particular schema for the input message. I have created a separate wsdl for the proxy service with another schema the input message.
I have to invoke the business service from proxy service. For this, I have added a route node and then a routing activity. In the request line of the routing activity i have used an assign where i will use XSLT to map input message of the proxy wsdl to the input message of the business service.
How do we access other variables when creating an XSLT?
Is my approach to the problem correct?
John

Hi,
I am doing that in an replace action.
In my flow I have the proxy service, then a pipeline, then I have the route.
In the pipeline I have replaced the input request using a XQuery transformation. When I test it, I see the input is coming till the route.
But the same pay load is valid and workin if I pass it when I invoke the route service independently. when i use it in the flow its not working.
Simply it says the system error
Below is the complete trace data
(receiving request)
Initial Message Context
added $body
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<proj:alertReportDataRequestMessage xmlns:proj="http://www.projgis.org/PROJGISMessageSchema">
<proj:header>
<proj:RequestId>3333</proj:RequestId>
<proj:ReqTransactionId>333</proj:ReqTransactionId>
<proj:ConsumerId>string</proj:ConsumerId>
<proj:ReqTimestamp>2008-09-29T07:19:45</proj:ReqTimestamp>
</proj:header>
<proj:NameOfTenant>string</proj:NameOfTenant>
<proj:AddressOfTenant>string</proj:AddressOfTenant>
<proj:RentalAmount>string</proj:RentalAmount>
<proj:StartDateOfRent>2014-09-19T04:48:33</proj:StartDateOfRent>
<proj:EndDateOfRent>2006-08-19T22:57:14+05:30</proj:EndDateOfRent>
<proj:SalesOfOrder>string</proj:SalesOfOrder>
</proj:alertReportDataRequestMessage>
</soapenv:Body>
added $header
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
added $inbound
<con:endpoint name="ProxyService$PROJGISProject$PROXYSERVICE$GetRentalExpiryAlertsData" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>insertClientReport</con:operation>
</con:service>
<con:transport>
<con:uri>
/PROJGISProject/PROXYSERVICE/GetRentalExpiryAlertsData
</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>
"http://xmlns.bodhtree.com/GetRentalExpiryAlertsData/insertClientReport"
</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
</con:response>
</con:transport>
<con:security>
<con:transportClient>
<con:username><anonymous></con:username>
</con:transportClient>
</con:security>
</con:endpoint>
added $messageID
2570677769696620240-29ef401f.12cef26de6e.-7ef1
PipelinePairNode1
stage2
Message Context Changes
changed $body
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<ins:ClientReportCollection xmlns:ins="http://xmlns.oracle.com/pcbpel/adapter/db/top/InsertClientReportTable">
<ins:ClientReport>
<ins:alertNo>1</ins:alertNo>
<ins:tenentName>string</ins:tenentName>
<ins:address>string</ins:address>
<ins:rentalAmt>string</ins:rentalAmt>
<ins:startDate>2014-09-19T04:48:33</ins:startDate>
<ins:endDate>2006-08-19T22:57:14+05:30</ins:endDate>
<ins:salesDocument>string</ins:salesDocument>
<ins:transId>333</ins:transId>
</ins:ClientReport>
</ins:ClientReportCollection>
</soapenv:Body>
changed $inbound
<con:endpoint name="ProxyService$PROJGISProject$PROXYSERVICE$GetRentalExpiryAlertsData" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>insert</con:operation>
</con:service>
<con:transport>
<con:uri>
/PROJGISProject/PROXYSERVICE/GetRentalExpiryAlertsDataPush
</con:uri>
<con:mode>request</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>
"http://xmlns.bodhtree.com/GetRentalExpiryAlertsData/insertClientReport"
</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
</con:response>
</con:transport>
<con:security>
<con:transportClient>
<con:username><anonymous></con:username>
</con:transportClient>
</con:security>
</con:endpoint>
changed $header
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
RouteNode1
Routed Service
Route to: "GetRentalExpiryAlertsDataPush"
$outbound:
<con:endpoint name="ProxyService$PROJGISProject$PROXYSERVICE$GetRentalExpiryAlertsDataPush" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>insertClientReport</con:operation>
</con:service>
<con:transport>
<con:mode>request</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
</tran:headers>
</con:request>
</con:transport>
<con:security>
<con:doOutboundWss>false</con:doOutboundWss>
</con:security>
</con:endpoint>
$body (request):
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<ins:ClientReportCollection xmlns:ins="http://xmlns.oracle.com/pcbpel/adapter/db/top/InsertClientReportTable">
<ins:ClientReport>
<ins:alertNo>1</ins:alertNo>
<ins:tenentName>string</ins:tenentName>
<ins:address>string</ins:address>
<ins:rentalAmt>string</ins:rentalAmt>
<ins:startDate>2014-09-19T04:48:33</ins:startDate>
<ins:endDate>2006-08-19T22:57:14+05:30</ins:endDate>
<ins:salesDocument>string</ins:salesDocument>
<ins:transId>333</ins:transId>
</ins:ClientReport>
</ins:ClientReportCollection>
</soapenv:Body>
$header (request):
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
$attachments (request):
<con:attachments xmlns:con="http://www.bea.com/wli/sb/context"/>
Message Context Changes
added $outbound
<con:endpoint name="ProxyService$PROJGISProject$PROXYSERVICE$GetRentalExpiryAlertsDataPush" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>insertClientReport</con:operation>
</con:service>
<con:transport>
<con:uri>
/PROJGISProject/PROXYSERVICE/GetRentalExpiryAlertsDataPush
</con:uri>
<con:mode>request</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">1</tran:response-code>
</con:response>
</con:transport>
<con:security>
<con:doOutboundWss>false</con:doOutboundWss>
</con:security>
</con:endpoint>
changed $body
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<ins:ClientReportCollection xmlns:ins="http://xmlns.oracle.com/pcbpel/adapter/db/top/InsertClientReportTable">
<ins:ClientReport>
<ins:alertNo>1</ins:alertNo>
<ins:tenentName>string</ins:tenentName>
<ins:address>string</ins:address>
<ins:rentalAmt>string</ins:rentalAmt>
<ins:startDate>2014-09-19T04:48:33</ins:startDate>
<ins:endDate>2006-08-19T22:57:14+05:30</ins:endDate>
<ins:salesDocument>string</ins:salesDocument>
<ins:transId>333</ins:transId>
</ins:ClientReport>
</ins:ClientReportCollection>
</soapenv:Body>
changed $inbound
<con:endpoint name="ProxyService$PROJGISProject$PROXYSERVICE$GetRentalExpiryAlertsData" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>insert</con:operation>
</con:service>
<con:transport>
<con:uri>
/PROJGISProject/PROXYSERVICE/GetRentalExpiryAlertsDataPush
</con:uri>
<con:mode>request</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>
"http://xmlns.bodhtree.com/GetRentalExpiryAlertsData/insertClientReport"
</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
</con:response>
</con:transport>
<con:security>
<con:transportClient>
<con:username><anonymous></con:username>
</con:transportClient>
</con:security>
</con:endpoint>
changed $header
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
Service Error Handler
$fault: <con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380000</con:errorCode>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>
System Error Handler
$fault: <con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380000</con:errorCode>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>
Is there any place where I can refer how to work with passing data from current flow to the next flow.
Do i need to do the transformation before invoking the route, or inside the route service request pipeline?
Do I need to change the method, URI etc as wells? before invoking the routing?
--Khaleel

Similar Messages

How to apply an XSLT transformation in OSB

Hello all ,
I tried to made a simple example - that apply a simple XSLT transformation in OSB .
I followed the http://blog.jayway.com/2010/05/07/xslt-transformations-in-oracle-service-bus/ example but still is not working in my project .
If I apply the imported xslt over the xml in testing window is working fine .
But the action to replace the content of the xml with the new one is not working.
Here is the xslt
<xsl:template match="/">
<ns0:donateToFund>
<arg0>
<xsl:value-of select="/Report/CustomerName"/>
</arg0>
<arg1>
<xsl:value-of select="/Report/CustomerNumber"/>
</arg1>
<arg2>
<xsl:value-of select="/Report/ReportName"/>
</arg2>
</ns0:donateToFund>
</xsl:template>
and here is a xml sample
- <Report>
<ReportName>Customer Report</ReportName>
<CustomerName>XXX</CustomerName>
<CustomerNumber>3423</CustomerNumber>
<GeneratedDate>2010-11-25 08:15:24.695</GeneratedDate>
- <Rowset>
- <Row>
<Quantity>100154</Quantity>
<CustomerPartNo>ee</CustomerPartNo>
<eSiliconPartNo>ee</eSiliconPartNo>
<Sector>ee</Sector>
<Location>eee</Location>
</Row>
- <Row>
In my action I put /Report as XPath ; body as variable and XSL fro transformation .
Can anyone help to fix this ?
Many thanks in advance,
Stefan

Following works for me:
XSLT
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output method="xml" omit-xml-declaration="yes"/>
<xsl:template match="/" xmlns:ns0="http://tempuri.org">
<ns0:donateToFund>
<arg0>
<xsl:value-of select="/Report/CustomerName"/>
</arg0>
<arg1>
<xsl:value-of select="/Report/CustomerNumber"/>
</arg1>
<arg2>
<xsl:value-of select="/Report/ReportName"/>
</arg2>
</ns0:donateToFund>
</xsl:template>
</xsl:stylesheet>Input to Proxy
 <Report>
 <ReportName>Customer Report</ReportName>
 <CustomerName>XXX</CustomerName>
 <CustomerNumber>3423</CustomerNumber>
 <GeneratedDate>2010-11-25 08:15:24.695</GeneratedDate>
 <Rowset>
 <Row>
 <Quantity>100154</Quantity>
 <CustomerPartNo>ee</CustomerPartNo>
 <eSiliconPartNo>ee</eSiliconPartNo>
 <Sector>ee</Sector>
 <Location>eee</Location>
 </Row>
 <Row>
 <Quantity>100154</Quantity>
 <CustomerPartNo>aa</CustomerPartNo>
 <eSiliconPartNo>aa</eSiliconPartNo>
 <Sector>aa</Sector>
 <Location>aaa</Location>
 </Row>
 </Rowset>
 </Report>Output of Proxy:
 <ns0:donateToFund xmlns:ns0="http://tempuri.org">
 <arg0>XXX</arg0>
 <arg1>3423</arg1>
 <arg2>Customer Report</arg2>
 </ns0:donateToFund>I am using a single Replace action in the request pipeline.
It works for both configs below:
Replace [ entire node ] of [ ./* ] in [ body ] with [Xslt Resource: default/OTN/temp
Input Document: $body/Report
Variable Names And Bindings ]
Or
Replace [ Node Contents ] of [ . ] in [ body ] with [Xslt Resource: default/OTN/temp
Input Document: $body/Report
Variable Names And Bindings ]
You need to ensure that if you are doing replace entire node of . in body or / in body then you should replace it with an XML whose root node is soap:Body. To achieve that you will need to change the XSL and add soap:Body as root of the output. Easier solution is to use replace contents of . body or replace entire node of ./* in body.

XSLT transformation in OSB Proxy Service

Hello, I am trying to modify the answer from a WebService using an XSLT transformation in an OSB Proxy Service, but I am unable to do so. Here it is the content of the answer's body it receives:
<ns0:getRecountUnitMovementsResponse xmlns:ns0="http://www.grifols.com/gds/interfaces/types/">
<ns1:result xsi:type="ns4:VO_PR_UnitsMovementsSDO" xmlns:ns1="http://www.grifols.com/gds/interfaces/types/" xmlns:ns4="/com/grifols/gds/webapp/inventoryCount/units/queries/common/" xmlns:ns0="http://xmlns.oracle.com/adf/svc/types/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:typ="http://www.grifols.com/gds/interfaces/types/">
<ns4:GrpId>4</ns4:GrpId>
<ns4:MovementType>960</ns4:MovementType>
<ns4:DcCode>165</ns4:DcCode>
<ns4:RecDcCode>165</ns4:RecDcCode>
<ns4:UnitItemNumber>11-0001</ns4:UnitItemNumber>
<ns4:RecUnitItemNumber xsi:nil="true"/>
<ns4:Bol xsi:nil="true"/>
<ns4:CustomerId xsi:nil="true"/>
<ns4:DocumentDate>2011-01-01T09:00:00.0+01:00</ns4:DocumentDate>
<ns4:PostingDate>2011-01-01T09:00:00.0+01:00</ns4:PostingDate>
<ns4:MovStatusCode>SE</ns4:MovStatusCode>
<ns4:Quantity>10</ns4:Quantity>
</ns1:result>
<ns1:result xsi:type="ns4:VO_PR_UnitsMovementsSDO" xmlns:ns1="http://www.grifols.com/gds/interfaces/types/" xmlns:ns4="/com/grifols/gds/webapp/inventoryCount/units/queries/common/" xmlns:ns0="http://xmlns.oracle.com/adf/svc/types/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:typ="http://www.grifols.com/gds/interfaces/types/">
<ns4:GrpId>1</ns4:GrpId>
<ns4:MovementType>913</ns4:MovementType>
<ns4:DcCode>165</ns4:DcCode>
<ns4:RecDcCode>165</ns4:RecDcCode>
<ns4:UnitItemNumber>11-0001</ns4:UnitItemNumber>
<ns4:RecUnitItemNumber xsi:nil="true"/>
<ns4:Bol xsi:nil="true"/>
<ns4:CustomerId xsi:nil="true"/>
<ns4:DocumentDate>2011-01-01T09:00:00.0+01:00</ns4:DocumentDate>
<ns4:PostingDate>2011-01-01T09:00:00.0+01:00</ns4:PostingDate>
<ns4:MovStatusCode>SE</ns4:MovStatusCode>
<ns4:Quantity>15</ns4:Quantity>
</ns1:result>
<ns1:result xsi:type="ns4:VO_PR_UnitsMovementsSDO" xmlns:ns1="http://www.grifols.com/gds/interfaces/types/" xmlns:ns4="/com/grifols/gds/webapp/inventoryCount/units/queries/common/" xmlns:ns0="http://xmlns.oracle.com/adf/svc/types/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:typ="http://www.grifols.com/gds/interfaces/types/">
<ns4:GrpId>2</ns4:GrpId>
<ns4:MovementType>913</ns4:MovementType>
<ns4:DcCode>165</ns4:DcCode>
<ns4:RecDcCode>165</ns4:RecDcCode>
<ns4:UnitItemNumber>21-00001</ns4:UnitItemNumber>
<ns4:RecUnitItemNumber xsi:nil="true"/>
<ns4:Bol xsi:nil="true"/>
<ns4:CustomerId xsi:nil="true"/>
<ns4:DocumentDate>2011-01-01T09:00:00.0+01:00</ns4:DocumentDate>
<ns4:PostingDate>2011-01-01T09:00:00.0+01:00</ns4:PostingDate>
<ns4:MovStatusCode>SE</ns4:MovStatusCode>
<ns4:Quantity>25</ns4:Quantity>
</ns1:result>
<ns1:result xsi:type="ns4:VO_PR_UnitsMovementsSDO" xmlns:ns1="http://www.grifols.com/gds/interfaces/types/" xmlns:ns4="/com/grifols/gds/webapp/inventoryCount/units/queries/common/" xmlns:ns0="http://xmlns.oracle.com/adf/svc/types/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:typ="http://www.grifols.com/gds/interfaces/types/">
<ns4:GrpId>3</ns4:GrpId>
<ns4:MovementType>959</ns4:MovementType>
<ns4:DcCode>165</ns4:DcCode>
<ns4:RecDcCode>165</ns4:RecDcCode>
<ns4:UnitItemNumber>11-0001</ns4:UnitItemNumber>
<ns4:RecUnitItemNumber xsi:nil="true"/>
<ns4:Bol xsi:nil="true"/>
<ns4:CustomerId xsi:nil="true"/>
<ns4:DocumentDate>2011-01-01T09:00:00.0+01:00</ns4:DocumentDate>
<ns4:PostingDate>2011-01-01T09:00:00.0+01:00</ns4:PostingDate>
<ns4:MovStatusCode>SE</ns4:MovStatusCode>
<ns4:Quantity>50</ns4:Quantity>
</ns1:result>
</ns0:getRecountUnitMovementsResponse>
And what I am trying to do is replace all the "/com/grifols/gds/webapp/inventoryCount/units/queries/common/" for "http://www.something.else". I have succeeded replacing it if the attribute name is "xmlns" instead of "xmlns:ns4". However, that ":ns4" changes everything and I can't get it to work. Does anyone know how to do so?
Thank you in advance. Don't hesitate to ask me for more information you may need.
Jordi

By the way, this is the XSLT transformation that works fine if we remove that ":ns4" from the attribute name:
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:source="/com/grifols/gds/webapp/inventoryCount/units/queries/common/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
version="2.0">
<xsl:output method="xml" encoding="iso-8859-1" indent="yes"/>
<xsl:template match="source:*">
<xsl:element name="{local-name()}" namespace="http://www.something.else">
<xsl:apply-templates select="@*|node()"/>
</xsl:element>
</xsl:template>
<xsl:template match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>

Error: "... is not a table ..." XML not correctly interpreted after XSL-transformation. Table row quantity problem.

Hey guys, this is one of my xml-elements:
Jaspreet Sohi 12 18 Juliane Lenz 11 17 Sophie Charlotte Stender 10 15 Rosbeh Hamidzadeh Khayyat 12 17 Lion Stoldt 12 17 Mats Lucas Meincke 6 8 Bero Luke Vincent Ernst 6 8 Cedric Roth 6 8 Soner Cantay 6 8 The following XSL Transformation I use once for transforming all "m" tags and once in order to transform all "j" tags. Please imagine the CSL-code below to be duplicated exactly. Only the "jungs"-table-Tag is replaced by "mädchen" and all underscores _j are replace by _m. As well all "select="j[@..." parts are replaced by "select="m[@...". 1 2 3 The code is very easygoing I think and not difficult to understand. As I said, I use it twice - for both transformations. The very, extremely weird thing, my problem, is that one transformation works perfectly in InDesign and a table is created for all "kategorie"-tags (all is set within a for-each loop). But the second script does not work! I simply do not get this I can't understand it. I've tried more than anything. InDesign sais (in German, so translated based on assumption) "jungs is an invalid table element or is displayed in wrong order". The second strange thing is that I can replace my "aid:trows" attribute by any number, e.g. "10" and immediately the script works fine (as there are never more than 6 "j" tags in my XML so that never the table has more than 6 rows"). But it does not want to work correctly with the actual number, my variable "rows_j". These are my variables: They are all defined before the tables for m and j are created. So finally, why (the heck) is one table created and interpreted perfectly whereas the second - immediately following the first in the XSL.script as an EXACT copy of the first - results in an error? As i've already said, I've tried really everything. For example the script works also when one of the parts "" is randomly deleted from the script. Removing one of these parts directly makes the script working. Just one of my attempts to understand the thing but this has only shown that none of these parts "cell to end-for-each" includes an error. I'm really desperate and looking forward to being rescued by one of you geniuses :)

Hah, No worries. The forum software is, well, different.
What would be better, though, would be a sample ID file, any XSLT/XLT files you use, and a bit of data exactly as you have it (pre-transform state). ZIP it up, upload to say dropbox.com and feel free to send me a private message for the download link.
Too many times there is something different between samples pasted into a post and the real thing that it is sometimes less useful time-wise. I'll keep it private, of course. Then we can communicate via PMs or email until we can (hopefully) arrive together at a solution, then post what that solution is in the forum to benefit others.
Thank you, Mike

Error in transformation in OSB

Hi all,
I am getting following error in transformation in OSB console:
<con:reason>
 OSB Assign action failed updating variable "PaymentRequestsPCMToEBS": com.bea.wli.common.xquery.XQueryException: Error parsing XML: {err}XP0006: "element {http://schemas.xmlsoap.org/soap/envelope/}Body { {http://www.w3.org/2004/07/xpath-datatypes}untypedAny }": bad value for type element {http://xmlns.oracle.com/pcbpel/adapter/db/top/PollPaymentStatusDB}StgPcmInPaymentReqCollection { {http://www.w3.org/2001/XMLSchema}anyType }
 </con:reason>
If I test the same in OEPE then there are no errors.
Here is the payload:
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
<pay:InputParameters xmlns:pay="http://xmlns.oracle.com/pcbpel/adapter/db/sp/PaymentStatus">
 
 <pay:P_INT_NAME>string</pay:P_INT_NAME>
 
 <pay:P_SOURCE_MESSAGE_REF>string</pay:P_SOURCE_MESSAGE_REF>
 
 <pay:P_SOURCE_ENTITY_REF>string</pay:P_SOURCE_ENTITY_REF>
 
 <pay:P_HEADER_REC>
 
 <pay:INTERFACE_SOURCE_CODE>string</pay:INTERFACE_SOURCE_CODE>
 
 <pay:BATCH_ID>string</pay:BATCH_ID>
 
 <pay:GROUP_CODE>string</pay:GROUP_CODE>
 
 <pay:HEADER_DESCRIPTION>string</pay:HEADER_DESCRIPTION>
 
 <pay:PR_NUMBER>string</pay:PR_NUMBER>
 
 <pay:HEADER_ATTRIBUTE3>string</pay:HEADER_ATTRIBUTE3>
 
 <pay:HEADER_ATTRIBUTE4>string</pay:HEADER_ATTRIBUTE4>
 
 <pay:NOTE_TO_BUYER>string</pay:NOTE_TO_BUYER>
 
 <pay:DELIVER_TO_REQUESTOR_NAME>string</pay:DELIVER_TO_REQUESTOR_NAME>
 
 <pay:CURRENCY_CODE>string</pay:CURRENCY_CODE>
 
 <pay:EXPENDITURE_ORGANIZATION_CODE>string</pay:EXPENDITURE_ORGANIZATION_CODE>
 
 <pay:ORGANIZATION_CODE>string</pay:ORGANIZATION_CODE>
 
 <pay:SUGGESTED_VENDOR_NAME>string</pay:SUGGESTED_VENDOR_NAME>
 
 <pay:SUGGESTED_VENDOR_ID>1000.00</pay:SUGGESTED_VENDOR_ID>
 
 <pay:SUGGESTED_VENDOR_SITE>string</pay:SUGGESTED_VENDOR_SITE>
 
 <pay:SUGGESTED_VENDOR_SITE_ID>1000.00</pay:SUGGESTED_VENDOR_SITE_ID>
 
 <pay:SUGGESTED_VENDOR_CONTACT>string</pay:SUGGESTED_VENDOR_CONTACT>
 
 <pay:SUGGESTED_VENDOR_CONTACT_ID>1000.00</pay:SUGGESTED_VENDOR_CONTACT_ID>
 
 <pay:SUGGESTED_VENDOR_PHONE>string</pay:SUGGESTED_VENDOR_PHONE>
 
 <pay:ACCRUAL_ACCOUNT_ID>1000.00</pay:ACCRUAL_ACCOUNT_ID>
 
 <pay:VARIANCE_ACCOUNT_ID>1000.00</pay:VARIANCE_ACCOUNT_ID>
 
 <pay:BUDGET_ACCOUNT_ID>1000.00</pay:BUDGET_ACCOUNT_ID>
 
 <pay:AMOUNT>1000.00</pay:AMOUNT>
 
 <pay:CERTIFIED_DATE>2008-09-29T02:49:45</pay:CERTIFIED_DATE>
 </pay:P_HEADER_REC>
 
 <pay:P_LINES_TAB>
 
 <pay:P_LINES_TAB_ITEM>
 
 <pay:QUANTITY>1000.00</pay:QUANTITY>
 
 <pay:UNIT_OF_MEASURE>string</pay:UNIT_OF_MEASURE>
 
 <pay:UNIT_PRICE>1000.00</pay:UNIT_PRICE>
 
 <pay:ITEM_SEGMENT1>string</pay:ITEM_SEGMENT1>
 
 <pay:CHARGE_ACCOUNT_SEGMENT1>string</pay:CHARGE_ACCOUNT_SEGMENT1>
 
 <pay:CHARGE_ACCOUNT_SEGMENT2>string</pay:CHARGE_ACCOUNT_SEGMENT2>
 
 <pay:CHARGE_ACCOUNT_SEGMENT3>string</pay:CHARGE_ACCOUNT_SEGMENT3>
 
 <pay:CHARGE_ACCOUNT_SEGMENT4>string</pay:CHARGE_ACCOUNT_SEGMENT4>
 
 <pay:CHARGE_ACCOUNT_SEGMENT5>string</pay:CHARGE_ACCOUNT_SEGMENT5>
 
 <pay:CHARGE_ACCOUNT_SEGMENT6>string</pay:CHARGE_ACCOUNT_SEGMENT6>
 
 <pay:CHARGE_ACCOUNT_SEGMENT7>string</pay:CHARGE_ACCOUNT_SEGMENT7>
 
 <pay:PROJECT_NUM>string</pay:PROJECT_NUM>
 
 <pay:TASK_NUM>string</pay:TASK_NUM>
 
 <pay:EXPENDITURE_TYPE>string</pay:EXPENDITURE_TYPE>
 
 <pay:DESTINATION_ORGANIZATION_CODE>str</pay:DESTINATION_ORGANIZATION_CODE>
 
 <pay:LINE_ATTRIBUTE2>string</pay:LINE_ATTRIBUTE2>
 
 <pay:NEED_BY_DATE>2014-09-19T00:18:33</pay:NEED_BY_DATE>
 
 <pay:DISTRIBUTION_ATTRIBUTE5>string</pay:DISTRIBUTION_ATTRIBUTE5>
 
 <pay:CURRENCY_UNIT_PRICE>1000.00</pay:CURRENCY_UNIT_PRICE>
 
 <pay:CURRENCY_AMOUNT>1000.00</pay:CURRENCY_AMOUNT>
 
 <pay:ITEM_DESCRIPTION>string</pay:ITEM_DESCRIPTION>
 
 <pay:CATEGORY_SEGMENT1>string</pay:CATEGORY_SEGMENT1>
 
 <pay:TAX_CODE>string</pay:TAX_CODE>
 
 <pay:DISTRIBUTION_ATTRIBUTE9>string</pay:DISTRIBUTION_ATTRIBUTE9>
 
 <pay:REMARKS>string</pay:REMARKS>
 
 <pay:LIABLE_FOR_WHT>string</pay:LIABLE_FOR_WHT>
 </pay:P_LINES_TAB_ITEM>
 </pay:P_LINES_TAB>
</pay:InputParameters>
In transformation I am using following code for converting String to Decimal
 for $vendorSiteId in $stgPcmInPaymentReqCollection1/ns1:StgPcmInPaymentReq[1]/ns1:vendorSiteId
 return
 <ns0:SUGGESTED_VENDOR_SITE_ID>{ xs:decimal(data($vendorSiteId)) }</ns0:SUGGESTED_VENDOR_SITE_ID>
Please let me know if I am missing anything.

your payload doesn't seem to be correct.
if you're trying to parse a soap envelop i would expect a soap:Body tag
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
<soap:Body>
<pay:InputParameters xmlns:pay="http://xmlns.oracle.com/pcbpel/adapter/db/sp/PaymentStatus">
</soap:Body>

Convertion of String to XML node using Xquery transformation in OSB

How to convert string to XML node elementusing a built in function using Xquery transformation in OSB?

check this out - http://www.javamonamour.org/2011/06/fn-beainlinedxml.html
if in SOA (BPEL & Mediator) you can use oraext:parseXML.
you should thoroughly analyse where to implement your requirement as some good practices advise to implement more complex logic in SOA and leave OSB to only connect to the services' endpoints.
Hope this helps,
A.

How to call business service from xquery transformation in OSB ??

Hi All,
How to call business service from xquery transformation in OSB ??
I need to assign the response variable of Business Service to a target element in XQuery Transformation Mapper file.
It's urgent.
Regards,
Jyoti Nayak

Transformation is to mapping the source and target of 2 different schemas.
In your case you should have a XQuery transformation between, your Business Service output schema and the target schema.
Thanks,
Vijay

XSL Transformation breaks encoding declaration

The first line in my XML:
<?xml version="1.0" encoding="ISO-8859-1"?>
The first line in my XSL:
<?xml version="1.0" encoding="ISO-8859-1"?>
Once I do the transformation, I end up with this in my XSL-FO
file:
<?xml version="1.0" encoding="ISO8859-1"?> where it
should be ISO-8859-1.

You need to watch out for the namespace in the source document:
You can either specify the namespace and use it when locating paths in the source document (as below) or specify it as the default namespace.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet
 xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
 version="1.0"
 xmlns:xalan="http://xml.apache.org/xslt"
 xmlns:n="http://sirius/xml/common">
<xsl:template match="/">
 <SiebelMessage IntObjectFormat="Siebel Hierarchical" IntObjectName="TBS2 OHS Reply" MessageType="Integration Object">
 <TBS2OHSReply>
 <OrderEntry-Orders>
 <BackOfficeErrorText><xsl:value-of select="n:OrderResponseComplex/n:RejectionReasonCode"/></BackOfficeErrorText>
 <Status><xsl:value-of select="n:OrderResponseComplex/n:AcceptedIndicator"/></Status>
 </OrderEntry-Orders>
 </TBS2OHSReply>
 </SiebelMessage>
</xsl:template>
</xsl:stylesheet>

XSL transformation with xsl:import generates exceptions

I am using the Schematron's basic XSL file basic-schematron.xsl to validate the XML format of one of our data files. The XSL file looks something like this
================
<xsl:stylesheet
version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:axsl="http://www.w3.org/1999/XSL/TransformAlias">
<xsl:import href="skeleton1-5.xsl"/>
<xsl:template name="process-prolog">
<axsl:output method="text" />
</xsl:template>
==================
But, the validation fails while trying to run the transformation on my Schematron input file using this basic-schematron.xsl with java.lang.NoSuchMethodError:
======= OUTPUT ============
Markup Error: no match attribute on <key> outside <rule>
Exception in thread "AWT-EventQueue-0" java.lang.NoSuchMethodError: GregorSamsa.process$dash$root(Lcom/sun/org/apache/xalan/internal/xsltc/DOM;Lcom/sun/org/apache/xml/internal/dtm/DTMAxisIterator;Lcom/sun/org/apache/xml/internal/serializer/SerializationHandler;ILjava/lang/Object;)V
 at GregorSamsa.applyTemplates()
 at GregorSamsa.applyTemplates()
 at GregorSamsa.transform()
 at com.sun.org.apache.xalan.internal.xsltc.runtime.AbstractTranslet.transform(AbstractTranslet.java:594)
 at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerImpl.transform(TransformerImpl.java:640)
 at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerImpl.transform(TransformerImpl.java:279)
 at com.solipsa.xsdvalidator.XSDValidator.validateSchematron(XSDValidator.java:137)
 at com.solipsa.xsdvalidator.XSDValidator.validate(XSDValidator.java:181)
 at com.solipsa.xsdvalidator.XSDValidatorUI.jButton1ActionPerformed(XSDValidatorUI.java:244)
 at com.solipsa.xsdvalidator.XSDValidatorUI.access$300(XSDValidatorUI.java:21)
 at com.solipsa.xsdvalidator.XSDValidatorUI$4.actionPerformed(XSDValidatorUI.java:140)
 at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
 at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
 at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
 at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
 at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:234)
 at java.awt.Component.processMouseEvent(Component.java:5488)
 at javax.swing.JComponent.processMouseEvent(JComponent.java:3093)
 at java.awt.Component.processEvent(Component.java:5253)
 at java.awt.Container.processEvent(Container.java:1966)
 at java.awt.Component.dispatchEventImpl(Component.java:3955)
 at java.awt.Container.dispatchEventImpl(Container.java:2024)
 at java.awt.Component.dispatchEvent(Component.java:3803)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
 at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
 at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
 at java.awt.Container.dispatchEventImpl(Container.java:2010)
 at java.awt.Window.dispatchEventImpl(Window.java:1766)
 at java.awt.Component.dispatchEvent(Component.java:3803)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
 at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:234)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
 at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
============= OUTPUT ==============
I tried the individual JAXP 1.3 for J2SDK 1.4.2 (Using the -Djava.endorsed.dirs JVM param) and tried the JDK 1.5.0_02 which has JAXP 1.3 inbuilt and they all fail.
I tried the above with separate Xalan/Xerces jar files, and then it works fine.
The problem seems to be somthing specific to the JAXP 1.3 environment. I can provide more details, if required. Any help is highly appreciated.

One morning your code woke up and found it had been transformed into a giant insect.
But seriously, here's the name of the method that doesn't exist:GregorSamsa.process$dash$rootIs GregorSamsa your class? Maybe your server has an old version of it which is missing that method? (Or: those $ signs look strange to me, maybe they are a mistranslation of some other character?)

XSL Transformation between arrays

Dear all
I create to XSD for my variables:
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:ns="http://www.asre-andishe.com/Inspec/General"
targetNamespace="http://www.asre-andishe.com/Inspec/General"
elementFormDefault="qualified">
<xsd:complexType name="AgentArrayType">
<xsd:sequence>
<xsd:element name="Agent" type="ns:AgentType" maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="AgentType">
<xsd:sequence>
<xsd:element name="user" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="Agent" type="ns:AgentType"></xsd:element>
<xsd:element name="AgentsArray" type="ns:AgentArrayType"></xsd:element>
</xsd:schema>
and the other one:
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:ns="http://www.asre-andishe.com/Inspec/DetermineInspec/retrive/relam"
targetNamespace="http://www.asre-andishe.com/Inspec/DetermineInspec/retrive/relam"
elementFormDefault="qualified">
<xsd:complexType name="RelamAgentType">
<xsd:sequence>
<xsd:element name="user" type="xsd:string" maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="RelamAgents" type="ns:RelamAgentType"></xsd:element>
</xsd:schema>
I create two empty variable and then initialized the second variable
<RelamAgents>
<user>john</user>
<user>david</user>
<user>jack</user>
</RelamAgents>
after that i use a transformation XSL and the second variable has been filled without no problem.
<AgentsArray>
<ns0:Agent>
<ns0:user>john</ns0:user>
</ns0:Agent>
<ns0:Agent>
<ns0:user>david</ns0:user>
</ns0:Agent>
<ns0:Agent>
<ns0:user>jack</ns0:user>
</ns0:Agent>
</AgentsArray>
but when i fill the first variable by receiving the output parameter from a service call, the XSL transformation did not work at all and the second variable remains empty.
I have checked the first variable and i am sure that it is not null and it has the same vale:
<RelamAgents>
<user>john</user>
<user>david</user>
<user>jack</user>
</RelamAgents>
Would anybody please help me with this problem?
Thank you very much

Hi,
receiving the output parameter from a service call, the XSL transformation did not workNamespaces... Check the namespaces the service call is using and see if they match with the XSL is expecting...
Cheers,
Vlad

XSL Transformation error source

I am using MII 12.0 and I am getting the following error in the log file:
javax.xml.transform.TransformerException: javax.xml.transform.TransformerException: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: An attempt to write after the stream had been closed.
The problem is that I am not using and XSL transforms that I know of. What BLS action might generate this error other than the obvious XSL Transformation Action?
Thanks.
...Sparks

I found this thread:
[Re: IDOC error|Re: IDOC error]
Is your system set up to receive any idocs?
Edited by: Christian Libich on Feb 8, 2010 10:00 PM

XSL Transformation failure

Here is a sample of my code:
I initially have one (non-null & valid - checked that !) node (dataNode). I need to do a XSL transformation on this one using an xsl (non-null & valid String). I can do manually the transform using a program such as XMLSpy and everything's fine !!!
If I pass the initial Node to transform as a String to the following function it works fine:
* Return the transformation of an XML through an XSL
public static String getTransformedXML(String xmlSourceString, String xslSourceString) {
StreamSource xmlSource;
StreamSource xslSource;
StreamResult xmlDestination;
StringWriter sw;
try {
xmlSource = new StreamSource(new StringReader(xmlSourceString));
xslSource = new StreamSource(new StringReader(xslSourceString));
xmlDestination = new StreamResult(sw = new StringWriter());
Transformer thisTransformer = tFactory.newTransformer(xslSource);
thisTransformer.transform(xmlSource, xmlDestination);
System.out.println("xxxxx = " + sw.getBuffer());
return sw.getBuffer().toString();
} catch (TransformerConfigurationException e) {
System.out.println("TRANSFORMATION CONFIGURATION ERROR:" + e.getMessage());
return null;
} catch (TransformerException e) {
System.out.println("TRANSFORMATION ERROR:" + e.getMessage());
return null;
But I CANNOT get working this code (instead of giving a String, I give a Node):
* Return the transformation of an XML through an XSL
public static Node getTransformedXML(Node xmlSourceNode, String xslSourceString) {
DOMSource xmlSource;
StreamSource xslSource;
DOMResult xmlDestination;
try {
xmlSource = new DOMSource(xmlSourceNode);
xslSource = new StreamSource(new StringReader(xslSourceString));
xmlDestination = new DOMResult();
Transformer thisTransformer = tFactory.newTransformer(xslSource);
System.out.println("avant");
thisTransformer.transform(xmlSource, xmlDestination); // HERE IS WHERE IT CRASHES !!!!
System.out.println("apres");
return xmlDestination.getNode();
} catch (TransformerConfigurationException e) {
System.out.println("TRANSFORMATION CONFIGURATION ERROR:" + e.getMessage());
return null;
} catch (TransformerException e) {
System.out.println("TRANSFORMATION ERROR:" + e.getMessage());
return null;
While using this function, I'm receiving the DOM Exception 3
TRANSFORMATION ERROR:org.apache.crimson.tree.DomEx: HIERARCHY_REQUEST_ERR : This node is not allowed here !
Also, does someone knows a way to convert a Node in a String ??? I'd like just to be able to println a node in the form "<parentNode><node1>value</node1><node2>value</node2></parentNode>" for example.
Please help !!!!
Thanks a lot in advance to any Java/XML Guru for helping.
Eg\\*

Come on ... I cannot believe that nobody saw that before. Isn't there any java/dom guru in here ;-) ?
Could it be a possibly a bug in the API ?
Thank you very much.
Eg\\*

XSL Transformation enconding problem?

Hi everybody.
I have a strange problem with JDev 9.0.2.829 concerning XSL Transformation:
I just tried to make the step from JDev 3.2.3 to 9i, imported my existing project and set up JDev 9 for use with XalanJ2 and Xerces2. Everything works fine except:
If I transform XML data to HTML that contains characters with an ASCII code >127 the whole string appears multiple times (2x or 3x) in the generated HTML.
The data is read from an Oracle DB with UTF8 encoding, all my stylesheets and JSPs are UTF-8 encoded. JDev9 is set to use UTF-8 encoding.
No compilation errors, no warnings.
The same code and stylesheets work perfectly in JDev 3.2.3, deployed into Topmcat 4.0.4 and IBM WebSphere 3.5.4.
What am I missing?
Thanks in advance!
Ralf Steppacher

OK, I found the culprit.
The JSPWriter is broken and produces the faulty output when fed with UTF-8 encoded character data. The problem disappears when all character data is buffered in a ByteArrayOutputStream first (without a special encodung schema given) and then written as a string through the JSPWriter.
Ralf

XSL Transformation Design View

Hello together,
we find an issue with design view of xsl transformation. When we use the design view serveral configurations and mappings where edited and deleted. For example <xsl:stylesheet version="2.0" change to version="1.0" and the call of EBMHeader-Template was deleted.
Has anybody the same problem? Our are everybody a "h a r d c o r e" coder and use the source view ;-)
Greetings from Karlsruhe
Marcel
PS: It's a little bit tricky to show the design view. We must switch between diffent xslt to see the design.

when you open the imported xsd in the browser, you do get a xsd shown up ?
and when you download the xsd locally and validate it, it is valid?

XSL transformation with java binding

Hi everyone!
I am trying to implement na XSL transformation that uses java code binding.
My XSL looks as follows:
<xsl:stylesheet xmlns:myobj="java.lang.System" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0" xmlns:xf="http://www.sapportals.com/wcm/app/xmlforms">
<xsl:param name="myobj"/>
<xsl:value-of select="string(myobj:currentTimeMillis())"/>
</xsl:stylesheet>
Everything works fine - current time is displayed.
But when I try to use my custom java class the compiler returns an exception:
com.sapportals.wcm.WcmException: com.sap.engine.lib.xml.util.NestedException: Could not load class: ep.UmeLookup required for execution of 'UmeLookup.isReady'
My second xsl stytesheet with a reference to custom class looks as follows:
<xsl:stylesheet xmlns:ume="ep.UmeLookup" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0" xmlns:xf="http://www.sapportals.com/wcm/app/xmlforms">
<xsl:param name="ume"/>
<xsl:value-of select="string(ume:UmeLookup.isReady())"/>
</xsl:stylesheet>
I developed java class (ep.UmeLookup), made a .jar from it, included the jar archive in a Library project and deployed the library to the J2EE engine.
It looks like my class is not 'visible' in J2EE engine, while in my opinion it should be. Does anyone know how to change that??
BR / marek

Ask this lady a question. Maybe she could answer your question.
XSLT Mapping With JAVA Enhancement ( For Beginners)

XSL transformation in OSB

Similar Messages

Maybe you are looking for