Drill-down Report, Form not completely showed in Report

Hiya!!
I'm working with Drill-down Report. Im creating a kind of P&L report but it has a lot of lines because I need to create one P&L report for every Region (Profit Center Group), and I need it in a fixed form.
The problem I have is that my Form has approximately 1080 lines but when I execute the Report (Tx FXI0), the Report just show 1020 lines and I don't have any error message. The output type I have choosen is graphical Report output "106 Navigation control, detail list" by now, but I already tried with all the possiblilities there are (Tx FXI2).
Does anybody knows If there is any limit for the output? If not, does anybody know where do I have the problem?
Thanks in advance.
Regards.
Adela Cambiasso

You can use the drill down strategy, well described by my friend Kan:
http://bipconsulting.blogspot.com/2010/02/drill-down-to-detail-or-another-report.html
regards
Jorge
p.s If this answers your question then please grant the points and close the thread

Similar Messages

Rscrm_bapi ERROR : 'Report Metadat not complete' !!

hi Experts,
While executing rscrm_bapi to execute the query in the background I am getting the following error:-
"<b><i>Report Metadata not complete</i></b>"
Please help me to find out where I went wrong and also guide me to solve the problem.
Thanks in advance.

Hi,
Unlike in BW3.5 Dynamic variable selection is not supported in BI7.0.Please check the note below
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=973676&nlang=EN&smpsrv=https%3a%2f%2fwebsmp208%2esap-ag%2ede
Regards
Chandru

OrgAudit OrgUnit Listing Detail not completely show

I'm working on OrgAudit 4.0 SP1 Build 0910021800.
If click OrgUnit from the Org Unit Listing, detail will not completely show as below.
(Tab Direct Errors and All Errors)
But If I click Action -> View in Org Unit then click on that Org, detail shows correctly.
It seems, function for display was not called because if there is no data, will display as below
All configurations I did are Setup Connection, Re-create Structure, Extract Data, Run Audit.
Is there any configuration I missing?

Are there any errors appearing in the cds.log when you select from the org unit listing?
Alternately does anything interesting show up for an RFC trace (application wide settings)?
Regards,
Stephen.

Drill down on Fiscal year period shows results in 2 rows

Hello All,
My report has a requirement to analyze the data across different fiscal year. When the report is then drill downed on Fiscal year period the data is shown on 2 lines.
eg.
report run for 2010 and 2011 for material M1 and plant P1
data in out put:
1) No Drill Down
Material Plant 2010Price 2010Volume 2011Price   2011Volume
M1         P1     100           1000               110             1100
2) Drill down on fiscal year period it shows data as :
Material Plant Fiscal-Year-period 2010Price 2010Volume 2011Price 2011Volume
M1         P1     01.2010                  100          1000
M1         P1     01.2011                                                        110            1100
3) How the data is needed:
Material Plant Fiscal-Year-Period 2010Price 2010Volume 2011Price 2011Volume
M1         P1     01                          100            1000             110           1100
Any simple way to do this? i can not add the navigational attribute to 0FISCPER as i do not have the time to modify the standard object and get all the approvals.
Regards,
Vijay.

Hi Vjay ,
Try the below way
From you example
In the Rows Area Put
Material
Plant
Posting Period (FISCPER3)
In the Columns Area
Put FISCYEAR above Keyfigure Structure.
This will display the result as you require...
Regards,
Ravi

Parameter form not displaying in 9i reports. Works fine in 6i!!

Parameter form does not show up with any options mentioned in the cgicmd.dat.
It works in 6i & surprisingly in 9i reports it doesn't.
In 6i reports destype=cache shows the report output on screen but in 9i it doesn't, the report just sits in the cache dir of reports on the middle tier.
Was Oracle in a hurry to release such incomplete versions???as it shows 9 is exactly opposite to 6 in apperance so are the versions!!! & too much java is harmful to the system performance.
If there's a patch please...

my url looks like this
http://abc:8888/reports/rwservlet?report=myreport.jsp&userid=a/b@c&server=myserver&paramform=yes
or paramform=html with all other arguments same
i have chosen system parameters destype,desname,desformat along with one user parameter
i tried putting the same arguments as it has to put in the cgicmd.dat key map & also typed the above url from the client.
If i give initial values to the parameters then for example i say destype as mail & give other parameters appropriate values , i get a status html form which says report ran successfully.The user gets the mail
If i do not give initial values to every parameter except destype i still get the status message as report ran successfully, but the mail would have not gone.
Is it that the reports will run only when deployed on 9iAS or it runs otherwise too on a system which has 9iDS.
I had posted the same question earlier but i didn't quite understand about report escapes...the person who replied meant to say
Mahesh

Down Payment entries not reflecting in J1INMIS report

Dear Guru's,
TDS deducted at the time of down payment made to vendor is not reflecting in J1inmis report.
Is J1INMIS report does not reflect down payment entries?
What will be the reason for this?
Which alternative report to followed for J1INMIS !!!
Waiting for your positive reply.
Regards,
Sany.

Hi Sany,
To update Business Place & Section Code, execute the program given below. After execution of the program run T.Code J1INPP and your issue should get resolved. Let me know if this works.
Ask the Abaper to write the following Code & execute the program:
REPORT ZFI_BUP_SEC_CHANGE.
TABLES : BSIK,BSAK,BSEG.
parameters: PA_BELNR TYPE BSEG-BELNR OBLIGATORY,
            PA_BUKRS TYPE BSEG-BUKRS OBLIGATORY,
            PA_GAAHR TYPE BSEG-GJAHR OBLIGATORY.
PARAMETERS : PA_BUPLA TYPE BSEG-BUPLA NO-DISPLAY,
             PA_SECCO TYPE BSEG-SECCO NO-DISPLAY.
PA_BUPLA = 'MUM'.                               (Note : Use the Business place & section Code Used
PA_SECCO = 'MUM'.                                         in your company code).
START-OF-SELECTION.
PERFORM CHANGE_DATA.
END-OF-SELECTION.
*&      Form CHANGE_DATA
      text
--> p1        text
<-- p2        text
FORM CHANGE_DATA .
DATA : LT_BSEG TYPE TABLE OF BSEG WITH HEADER LINE,
       LT_BSIK TYPE TABLE OF BSIK WITH HEADER LINE,
       LT_BSAK TYPE TABLE OF BSAK WITH HEADER LINE.
BSeg updation
SELECT *
INTO CORRESPONDING FIELDS OF TABLE LT_BSEG
FROM BSEG
WHERE BUKRS = PA_BUKRS   AND
      GJAHR = pa_gaahr   AND
      BELNR = PA_BELNR.
LOOP AT LT_BSEG.
IF LT_BSEG-BSCHL    = '25' OR LT_BSEG-BSCHL = '26'
     OR LT_BSEG-BSCHL = '27' OR LT_BSEG-BSCHL = '28'
     OR LT_BSEG-BSCHL = '35' OR LT_BSEG-BSCHL = '36'
     OR LT_BSEG-BSCHL = '37' OR LT_BSEG-BSCHL = '38'
     OR LT_BSEG-BSCHL = '39'.
    LT_BSEG-BUPLA = PA_BUPLA.
    LT_BSEG-SECCO = PA_SECCO.
    MODIFY BSEG FROM LT_BSEG.
    Write : / LT_BSEG-BELNR, 'Update For BSEG', LT_BSEG-BSCHL,
              LT_BSEG-BUPLA,LT_BSEG-SECCO.
ENDIF.
ENDLOOP.
Bsik updation
SELECT *
INTO CORRESPONDING FIELDS OF TABLE LT_BSIK
FROM BSIK
WHERE BUKRS = PA_BUKRS   AND
      GJAHR = pa_gaahr   AND
      BELNR = PA_BELNR.
LOOP AT LT_BSIK.
IF LT_BSIK-BSCHL    = '25' OR LT_BSIK-BSCHL = '26'
     OR LT_BSIK-BSCHL = '27' OR LT_BSIK-BSCHL = '28'
     OR LT_BSIK-BSCHL = '35' OR LT_BSIK-BSCHL = '36'
     OR LT_BSIK-BSCHL = '37' OR LT_BSIK-BSCHL = '38'
     OR LT_BSIK-BSCHL = '39'.
    LT_BSIK-BUPLA = PA_BUPLA.
    LT_BSIK-SECCO = PA_SECCO.
    MODIFY BSIK FROM LT_BSIK.
    Write : / LT_BSIK-BELNR, 'Update For BSIK', LT_BSIK-BSCHL,
              LT_BSIK-BUPLA,LT_BSIK-SECCO.
ENDIF.
ENDLOOP.
BsAk updation
SELECT *
INTO CORRESPONDING FIELDS OF TABLE LT_BSAK
FROM BSAK
WHERE BUKRS = PA_BUKRS   AND
      GJAHR = pa_gaahr   AND
      BELNR = PA_BELNR.
LOOP AT LT_BSAK.
IF LT_BSAK-BSCHL    = '25' OR LT_BSAK-BSCHL = '26'
     OR LT_BSAK-BSCHL = '27' OR LT_BSAK-BSCHL = '28'
     OR LT_BSAK-BSCHL = '35' OR LT_BSAK-BSCHL = '36'
     OR LT_BSAK-BSCHL = '37' OR LT_BSAK-BSCHL = '38'
     OR LT_BSAK-BSCHL = '39'.
    LT_BSAK-BUPLA = PA_BUPLA.
    LT_BSAK-SECCO = PA_SECCO.
    MODIFY BSAK FROM LT_BSAK.
    Write : / LT_BSAK-BELNR, 'Update For BSAK', LT_BSAK-BSCHL,
              LT_BSAK-BUPLA,LT_BSAK-SECCO.
ENDIF.
ENDLOOP.
ENDFORM.                    " CHANGE_DATA
Thank You.

Drill down on a Pivot Table in XL Reporter

Hi,
I created an xl document (Pivot table) in XL Reporter. When i double click on a cell to drill down to the detail i get the following error message.
Multiple Report Workheets is not supported in this version of Excel Reporter.
The Excel Reporter Version is: 8.0.19
Any suggestions will be very appreciated.
Regards,
Manuel Roman

Hi Gordon,
I created the pivot table on XL Reporter Designer.
Pulled the data from the SAP dataase using the create pivot table from an External data Source.
Regards,
Manuel

Drop down boxes ok in Crystal Reports but not ok in Crystal Reports Server

I have the following problem with "dynamic dropdowns"
Initially, I have a Crystal Report (.rpt). It has two dynamic drop downs. They work
in both Crystal Reports Designer (preview) and Crystal Reports Server (right-click-View).
The first drop down is the result of a rather complex sql query. The second drop down
is a child of the first.
I make a small change to the sql "WHERE" clause using the Crystal Reports Designer. It works fine in preview.
I save (Enterprise mode) to Crystal Server. I use Business View Manager to configure
the _DC_n object. (I did notice that the .._DC_n gets incremented by one.)
The _DF object seems to know about the updated sql so I do not have change it.
However, when I go to back to Crystal Reports Server, and right-click-View, the
"dynamic dropdown" is not working properly. I can not make sense
of what has been retrieved.
Please tell me what is most likely to have gone wrong here? The Business View Manager
seemed to knew about the sql change. But Crystal Reports Server has
not responded to the change in the same way as Crystal Reports Designer.
...thank you, Stan

When you publish a report to Crystal Server, the dynamic prompts are no longer handled in the report itself. Instead depending on how they're published, they either go away or they're published to the "repository" and managed through the "Business View Manager" (BVM), which is available as part of the Client Tools install.
To get the dynamic prompt into the repository, you have to check the "Enable Repository Refresh" checkbox at the bottom of the "Save As" screen after you log in to CRS. However, doing it this way is NOT best practice, especially if you're using the query from the report to provide the data for the prompt. If you do this for all of your reports, you get a LOT of bloat in the repository objects and it makes the job of migrating from one version of CRS to another MUCH more difficult!
What I've done in the past to get a simple "sample" prompt published is create a report that just contains the data that I want to have in the dynamic parameter using a single table - this is usually what I call a "lookup" table that has a "code" field and a "description" or "name" field. I then create a dynamic parameter in that report that just pulls the data from the single table. I'll publish the report to my favorites with the Repository Refresh enabled.
I then run the BVM and look for the following objects (default location is under "Cascading Dynamic Prompts":
<prompt name>_DC - This is the Data Connection for the prompt. Edit this, enter the password, and set it to "Never Prompt" for the password. NOTE: This DC can be reused by multiple prompts. If you continue to add prompts through publishing Crystal Reports with prompts, you will get MANY of these that all point to the same database!
<prompt name>_DF - This is the Data Foundation for the prompts. When you create a new one, you need to select an existing DC and then either one or more tables or write a command to provide the data for your prompt. It works much like the Database Explorer in Crystal. The one that was just saved has all of the information required for the prompt.
<prompt name>_BE - This is the Business Element. When you create one, you have to select and existing DF and one or more fields. You can also create a filter on the data. This is used to generate the SQL that will be run to provide the data for the prompt.
<prompt name>_ BV - This is the Business View. When you create one, you have to select the Business Element. I'm not sure of the exact purpose of this, but you have to have one in order to set up the "List of Values".
<prompt name> - This is the List of Values (LOV). This defines what fields are available for the prompt itself.
You can create folders to organize these objects so that its easier to maintain.
To use a LOV that you've defined in BVM to feed data to new dynamic prompts, do the following:
1. Connect to CRS from Crystal.
2. Create/Edit your prompt.
3. Set the prompt to be dynamic.
4. Under "Choose a Data Source", select "Existing" and select the LOV from the drop-down list.
5. Update the properties in the parameter.
When viewing or scheduling a report, the dynamic prompts will run through the Crystal Reports 2013 Report Application Server in CRS (it will be named differently if you're not on CRS 2013, but will have "Report Application Server" in the name.)
-Dell

Vendor wise drill down in Trial Balance or Balance sheet report

Dear Experts,
Is there any report for Trial Balance or P&L/ Balance Sheet report where vendor wise drill down of amounts is possible?
Please suggest.
Regards
Komal

Hi Dear ,
You can use F.08 for Trail Balance and Vendor details - S_ALR_87012082 - Vendor Balances in Local Currency
You can get cumulative balance for the vendor.
Regards
Radha

Parameter Form not calling the Main report - Gives REP-0110, REP-1070, REP-0110 error

I am using run_report_object to call a report in which the user has to input some paramters. I have followed the instructions as in the Oracle White paper document on Forms/Reports integration.
The paramter report does come up but when I hit the submit button, I get an error
REP-0110: Unable to open file 'rclug005'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'rclug005
I've checked the privileges and everything's fine on that front. Also, I can get to open the report with the web.show document built-in with paramform setting = No.
I am guessing something's wrong with the html constructed in the parameter form which is,
<form method=post action="http://myserver/dev60cgi/RWCGI60.EXE?">
<input name="hidden_run_parameters" type=hidden value="server=myserver &report=rclug005&destype=Cache&desformat=html&userid=uid/pwd@test">
In the Report Before Form trigger, I've copied the foll. html code from the Oracle White paper,
vc_parameter_form :=
'<html><body bgclor="ffffff"><form method=post action="'||:p_action||'">'||
'<input name="hidden_run_parameters" type=hidden
value= "'||vc_hidden_runtime_values||'">'||'<center><p>
<table border=0 cellspacing=0 cellpadding=0><tr><td>
<input type=submit></td><td> width=15
<td><input type=reset></td></tr></table><p><hr></p>';
I've set the :p_action parameter to a value of http://myserver/dev60cgi/RWCGI60.EXE?
Also, In the end of the report before form trigger I added this
srw.set_before_form_html(srw.text_escape, vc_parameter_form);
Any help/tips is appreciated & Thanks.

Thanks Danny,
I am building the variable exactly as in the White paper in the "before form" trigger using exactly the same values give there.
vc_hidden_runtime_values := 'server='||:p_servername||'&report='||vc_report_name||'.rep&destype='||:destype||'&desformat='||:desformat||'&userid='||:p_userinfo;
My report has some extra parameters too it expects. So do I have to include the names of those parameters too in the string above?
For example, in my report a user parameter is named 'print_date', which I do see and populate with value in the parameter form, then do I have to build that in the vc_hidden_runtime_values string above.
I am using Report 6.0.8.11.3 on 9iAS.

Unable to Multi Level Drill Down on Single Data Object in BAM Report

Hi,
We need to have multi level drill down in a BAM report.
We are able to create single level drill down using 'Collapsed List' view in a Tiled Report, but unable to drill further.
We are using BAM (11.1.1.2).
Please let us know the steps to do this, your input is highly appreciated.
Thanks,
Arijit
Edited by: user2917352 on May 4, 2011 11:21 PM

Have you used Dimension? By defining Dimensions, you can create multi level drill down on the same data object, in the same report.
1. Define the Dimension in the data object
2. In the Studio, choose Drilling tab under the report
3. Drill Hierarchies will be available. Choose the Dimension
The drilling level will depend on the depth of the Dimension you have specified!
-AR

DRILL DOWN ARROW - DOES NOT DRILL DOWN TO CORRECT INFO

hi guys,
i have a couple querys that i use on my alerts. a couple them drill down correctly.
for instance it supposed to drill down to the invoice number but when i click the arrow it brings up user window. how can i fix this.
thanks

SELECT TOP 10 OINV.DocNum, @NBS_R1OVERIDES.U_NBS_Date,
(CASE WHEN @NBS_R1OVERIDES.U_NBS_IntReason = 'ordldg' THEN 'Line Discount' WHEN @NBS_R1OVERIDES.U_NBS_IntReason = 'ordlpl' THEN 'Price Change'
ELSE 'Total Discount' END) AS DiscType, @NBS_R1OVERIDES.U_NBS_DispMessage, INV1.ItemCode, OHEM.firstName AS Cashier, OHEM_1.firstName AS Manager,
@NBS_R1OVERIDES.U_NBS_Comments
FROM OHEM INNER JOIN
@NBS_R1OVERIDES ON OHEM.empID = @NBS_R1OVERIDES.U_NBS_Cashier INNER JOIN
OHEM AS OHEM_1 ON @NBS_R1OVERIDES.U_NBS_Manager = OHEM_1.empID LEFT OUTER JOIN
INV1 INNER JOIN
OINV ON INV1.DocEntry = OINV.DocEntry ON @NBS_R1OVERIDES.U_NBS_Line = INV1.LineNum AND
@NBS_R1OVERIDES.U_NBS_R1TransNum = OINV.U_NBS_R1TransNum
WHERE (@NBS_R1OVERIDES.U_NBS_IntReason = N'ordlpl') OR
(@NBS_R1OVERIDES.U_NBS_IntReason = N'ordldg') OR
(@NBS_R1OVERIDES.U_NBS_IntReason = N'orddg')
ORDER BY @NBS_R1OVERIDES.U_NBS_Date DESC

Scheduled report is not triggered by another report on which it depends

Hi folks,
I intend to trigger a group of reports by running a dummy-report (it does not more than executing the function currentDate() and displaying the result in a text field) manually (using InfoView) and use the success of this report as the trigger event for each report of the mentioned report group.
I tried to start off with only one report to be triggered. This report is scheduled to write an Excel-Sheet to the Default Enterprise Location with a scheduling interval of 5 minutes. The report runs fine within the specified intervals without having specified the dummy-report as a prerequisite event for the actual data report.
As soon as I define the dummy-report as a triggering event for the data report, the data report is not executed regularly any more, i.e., the first instance appears and remains as "Recurring" in the history list and nothing more happens.
I first schedule the data report as indicated and then fire up the dummy-report using "Now" from the drop-down list. Interestingly, I have to press the "Refresh Workspace Panel"-Button, before the status of the dummy-report changes from "Running" to "Success", although the report does not a lot. But, as mentioned, the data report is not triggered.
What am I might doing wrong?
Cheers
Bobbyy

Hi
When the first time you are placing the excels sheet, the dependent report runs successfully.
For it to trigger next time the excel sheet should be deleted from that location. Only the occurence of the excel sheet will trigger the second report, so this should be deleted.
Gangadhar

SSRS reports are not fitting properly in Report Viewer Control

Hi All,
We are using Report Viewer Control to render SSRS reports & show it on SharePoint web page. In .aspx page we are putting Report Viewer Control as follows:
The zoom percent of Report we are getting from Report Server is 100%. We are making it as 50% to show it on our page. On one page, we are showing 2 reports.
<rsweb:ReportViewer ID="rpv2Chart1" runat="server" Font-Names="Verdana" Font-Size="8pt" ProcessingMode="Remote" Height="211px" Width="813px" ZoomPercent="50"></rsweb:ReportViewer >
The reports are coming. But the reports which we are getting inside the control are not readable & 25% of Report Viewer Control on our right hand side is blank.
As you can see it's not readable. For readability we want to use that white space also & want to utilize full controls's space. But if we try to increase percentage from our report viewer tag, then the graph is zooming in with both, height & width
so it's going out of control.
Client don't want scroll bars on Report Viewer control. We just want to utilize the entire Report Viewer Control space.
Can anyone suggest us how to do that?
Thanks,
Sanjay

Hi Sanjay,
I'm afraid that it is not the correct forum for this issue.
If it is the SSRS issue, you could post this issue here:
http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
If it is the VS report control issue, maybe you would get better response here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=vsreportcontrols
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Report viewer web part, show different report everyday (rotate .rdl files)

We have a report viewer web part on sharepoint site (intranet), which is working fine and showing the report (.rdl file).
We want to show different report everyday by looping through a list of 4 or 5 important reports (from sharepoint document library) that can be displayed on our intranet. We have limited space on the intranet to display the report (we have custom built
reports that will fit in the allocated space).
Our .net guy says he can do image rotations by custom web part but not sure how to use the .rdl files..
Has anyone got any ideas on how to achieve this.

We have a report viewer web part on sharepoint site (intranet), which is working fine and showing the report (.rdl file).
We want to show different report everyday by looping through a list of 4 or 5 important reports (from sharepoint document library) that can be displayed on our intranet. We have limited space on the intranet to display the report (we have custom built
reports that will fit in the allocated space).
Our .net guy says he can do image rotations by custom web part but not sure how to use the .rdl files..
Has anyone got any ideas on how to achieve this.

Drill-down Report, Form not completely showed in Report

Similar Messages

Maybe you are looking for