XSLT and Java Mapping
Hello friends,
Can any one know that how to create a XSLT and Java Mapping file(Jar File).
I am not able to find any of the example so if you create a example or find some where please let me know on that How to create such files...
Thanks...
Gaurav Jain
Hi,
I am trying to invoke a Java Extension Function from a XSLT. I added both the class file and the XSLT file to a folder, then zipped the entire folder and uploaded into the Archive for my Interface MApping.
The CLASS gets loaded but the runtime engine gives an error when calling the JAVA Function.
Here is what it says:
Creating mapping sequence with 2 steps. --- Creating Java mapping Deliveries/stringHandler --- Creating mapping sequence with 2 steps. --- Creating XSLT mapping Deliveries/test1 --- Using MappingResolver with context URL /sapmnt/XD1/global/xi/mapping/http%3A%2F%2Fwolterskluwer%2Ecom%2Fxi%2F wk_midas_deliveries%2Ftest/cd2e6820267511d9cb52c3c5143c3524/ --- Loaded class Deliveries.stringHandler --- com.sap.aii.ibrun.server.map.MappingRuntimeException: at com.sap.aii.ibrun.server.map.MappingRuntimeException.code_STYLESHEET_OR_CLASS_NOT_FOUND(MappingRuntimeException.java:91) at com.sap.aii.ibrun.server.map.RUMappingJava.instantiate(RUMappingJava.java:168) at com.sap.aii.ibrun.server.map.RUMappingJava.execute(RUMappingJava.java:41) at com.sap.aii.ibrun.server.map.RUSequence.execute(RUSequence.java:50) at com.sap.aii.ibrun.server.map.RURunner.run(RURunner.java:58) at com.sap.aii.ibrun.server.map.RUManager.run(RUManager.java:66) at com.sap.aii.ibrun.sbeans.map.MappingRequestHandler.handleRequest(MappingRequestHandler.java:67) at com.sap.aii.ibrun.sbeans.map.MappingServiceImpl.processFunction(MappingServiceImpl.java:83) at com.sap.aii.ibrun.sbeans.map.XMappingServiceObjectImpl0.processFunction(XMappingServiceObjectImpl0.java:24) at com.sap.aii.ibrun.sbeans.map.MappingServiceKey.processFunction(MappingServiceKey.java:10) at java.lang.reflect.Method.invoke(Native Method) at com.inqmy.services.rfcengine.RFCDefaultRequestHandler.invokeBean(RFCDefaultRequestHandler.java:83) at com.inqmy.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:50) at com.inqmy.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:69) at com.sap.mw.jco.JCO$Server.dispatchRequest(Unknown Source) at com.sap.mw.jco.rfc.MiddlewareRFC$Server.nativeListen(Native Method) at com.sap.mw.jco.rfc.MiddlewareRFC$Server.listen(Unknown Source) at com.sap.mw.jco.JCO$Server.listen(Unknown Source) at com.sap.mw.jco.JCO$Server.run(Unknown Source) at java.lang.Thread.run(Thread.java:513) --
Please tell me what is the problem?
Thanks for your time
A
Similar Messages
-
Give me description for ABAP and XSLT and JAVA Mapping
i want detailed description for XSLT AND ABAP,JAVA Mapping and where they require coding and some examples for this items and differences for these mappings and message mapping and some examples which shows difference between these items
Hi,
Java mapping:
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
ABAP Mapping:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
XSLT mapping
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
ABAP XSLT mapping
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping
Regards
Vijaya -
Any website for XSLT AND ABAP mapping
Hi XI experts,
I am looking for any good website/Material for XSLT and ABAP Mapping with examples.
So experts if you any one of you have any clue , i would appreciate it , if you post the info here .
Regds,
Ram.Hi,
For XSLT mapping, please try to create msg types for sender and recv, import these two into XML Mapforces (This is a software which enables us to do mapping this you can download from altova mapforce site) , do mapping in that mapforce , late click on XSLT icon , one XSLT file will be c reated that file , prepare zip and late come to xi , import under imported archieves,do Interface mapping by selecting the XSLT mapping option, select imported archieve..
See below examples..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
http://www.troobloo.com/tech/xslt.toc.shtml
http://www.w3schools.com/xsl/
http://www.w3.org/TR/xslt
http://help.sap.com/saphelp_nw04/helpdata/en/73/f61eea1741453eb8f794e150067930/frameset.htm
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-code-samples/generic%20xslt%20mapping%20in%20sap%20xi%2c%20part%20i.pdf
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
Required XSLT Mapping tips!
Regards
Chilla.. -
Wanted to confirm my understaing for ABAP and JAVA mapping.
Am I correct in my assumption that these mapping techniques can be used only if input and ouput is in XML format ?
So if XI is receiving a flat comma separated text/non-XML file or an IDOC for that matter and output is NOT in XML format, say again flat text file or IDOC, I cannot use above two techniques?
All the docs I have read suggest that 'Execute' method is called when XML file/data is received, paresed using DOM/SAX/JAXB (for Java mapping) or IXML lib (for ABAP mapping) and then create a output XML file.
-Thanks in advanceHi Bob,
Here you have a code sample for deescaping. I have have written this code a couple of time ago. The incoming file can be any text format. It might be XML, but not necessarily.
The main method is not reqired, but good for testing.
Regards
Stefan
* Created on 28.09.2005
* To change the template for this generated file go to
* Window>Preferences>Java>Code Generation>Code and Comments
package sample;
import com.sap.aii.mapping.api.*;
import java.io.*;
import java.util.Map;
public class Deescaping implements StreamTransformation{
public static void main (String[] args) {
try {
InputStream in = new FileInputStream(new File("in.xml"));
OutputStream out = new FileOutputStream(new File("out.xml"));
Deescaping change = new Deescaping();
change.execute(in, out);
} catch (Exception e) {
e.printStackTrace();
public void setParameter (Map map) {
public void execute (InputStream in, OutputStream out)
throws StreamTransformationException {
try {
int c;
while ((c = in.read()) != -1) {
if (c != '&') {
out.write(c);
} else {
// ampersand
String help = "&";
boolean exit = false;
// check the next 5 chars, if there is a ';'
for (int i = 0; i < 5 && !exit; i++) {
c = in.read();
if (c == -1) {
exit = true;
} else {
// another ampersand?
if (c == '&') {
out.write(help.getBytes());
help = "&";
i = 0; // check the next 5 chars
} else {
help = help + (char) c;
if (c == ';') {
exit = true;
if (help.equals("&")) {
help = "&";
if (help.equals("<")) {
help = "<";
if (help.equals(">")) {
help = ">";
if (help.equals(""")) {
help = """;
if (help.equals("'")) {
help = "'";
} // for
out.write(help.getBytes());
} // while
out.flush();
} catch (Exception e) {
throw new StreamTransformationException(e.getMessage(),e); -
RESOURCE_NOT_FOUND for XSLT and Java Mappings (SXMB_MONI)
Experts,
I need your opinion / experience about a problem that we have been facing here:
XI 3.0 was upgraded to PI 7.0, but since then all interfaces that uses XSLT and Java Mappings throws a RESOURCE_NOT_FOUND error in SXMB_MONI only in the production environment.
We found SAP Note 951318 that describes exactly the scenario we have here. The note also inform that the issue is solved at SP 07 (for PI 7.0).
The problem is that we find out that abap and java instance are with different SP ( SP 13 for abap and SP 09 for java) after XI upgrade to 7.0, since they had a error at java instance.
Have anyone of you facing with this problem?
I believe that even having a SP greater than 07 (as sap note 951318 requires), as we have an difference between abap and java SP, this issue might have been causing the problem.
Points will be given.
Regards,
DanielaYes, thats true. As you can see,
In XI 3.0 (SAP Netweaver'04), the issue is solved in:
SP 18,
SP 17, patch 1 (archive SAPXITOOL17_1. sca for XI Tools)
SP 16, patch 4 (archive SAPXITOOL16_4.sca for XI Tools).
you need to import and put a patch if you are using XI 3.0. but in your case it is PI 7.0.
So please check out the SAP Note : 950608 and download SP 07,patch 2 (archive SAPXITOOL07_2.sca for XI Tools).and Note 952402 .
Regards
Aashish Sinha
PS : reward points if helpful -
Simple XML to Text onversion using XSLT and Java?
Hi all!
I'm completly new to using XSLT and Java and are trying to convert a XML file into a ordinary Textfile that I am gonna import into another application.
I started up writing a ordinary XML parser in Java which interpreted the XML file, but realized later on that it was possible to do with a ordinary XSLT.
So far it is a 2-step process right now, I've tied my XSLT to the XML file and then just open the XML file up in a ordinary browser and then get the result.
I found an example (http://www.onjava.com/pub/a/onjava/excerpt/java_xslt_ch5/index.html?page=3) where u hook up a XML file and a XSL file separately and the process it, and dump it to Stdout. But do I need to hook up a XSL file like this when the XML file is tied to a XSL file internally?Just to give you an example to show you how easy it is: http://www.daniweb.com/forums/thread137587.html
-
Message Mapping ... ABAP ,XSLT and JAVA
HI Friends
I have a general question ... but it will confuse me a lot ....
my question is we have four types of message mappings
1) GUI ( and UDFs)
2) ABAP
3)XSLT
4) JAVA
when we have plenty of options in GUI (and User defined functions also) to define sender 2 receiver message mapping
then what is need of JAVA,ABAP and XSLT Message Mapping and when we use these message mappings( exactly in which situation) and difference b/w them
Thanks in Advance
MaheshGreen = recommended
Yellow = Acceptable
Red = not recommended
In my experience.
XSLT mapping: is confotable to convert to another format different to xml(when we do not have a complex logic)
Java Mapping: is to implement complex logics(but the maintainbilityis not good...you need a external tool)
ABAP mapping: I think is the best option when the you have the skills on that technology but take account that is not portable neither good for usability.
Regards
Ivan -
XML to string using xslt or java mapping
Hi Experts,
I want to put xml into string and i need to change lessthan symbol to "<" and greaterthan symbol to ">" , can anyone please help me how to do this??? can you provide code for java mapping or XSLT mapping to achive this.
SOURCE
<?xml version="1.0" encoding="UTF-8"?>
<ns0:source_mt xmlns:ns0="urn:ppp:prototype">
<row>
<name1>IT</name1>
<name2>SOLUTIONS</name2>
</row>
</ns0:source_mt>
TARGET
<?xml version="1.0" encoding="UTF-8"?>
<ns0:target_mt xmlns:ns0="urn:ppp:prototype">
<row>
<Body>"<"name1">" IT"<"/name1">" "<"name2">" SOLUTIONS"<";/name2">" </Body>
</row>
</ns0:target_mt>Hi ,
here is the XSLT code to obtain the desired output
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml"/>
<xsl:template match="/">
<ns0:target_mt xmlns:ns0="urn:ppp:prototype">
<xsl:for-each select="//row">
<row>
<Body>
<xsl:for-each select="name1">
<xsl:value-of select="concat('*"<"name1">"*',normalize-space(.),'*"<"/name1">"*')"></xsl:value-of>
</xsl:for-each>
<xsl:for-each select="name2">
<xsl:value-of select="concat('*"<"name2">"*',normalize-space(.),'*"<"/name2">"*')"></xsl:value-of>
</xsl:for-each>
</Body>
</row>
</xsl:for-each>
</ns0:target_mt>
</xsl:template>
</xsl:stylesheet>
output produced as viewed in browser is
http://postimage.org/image/1lqbgw8kk/
Now to obtain exactly the output you posted earlier here is the code
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml"/>
<xsl:template match="/">
<ns0:target_mt xmlns:ns0="urn:ppp:prototype">
<xsl:for-each select="//row">
<row>
<Body>
<xsl:for-each select="name1">
<xsl:value-of select="concat('*"&lt"name1"&gt"*',normalize-space(.),'*"&lt"/name1"&gt"*')"></xsl:value-of>
</xsl:for-each>
<xsl:for-each select="name2">
<xsl:value-of select="concat('*"&lt"name2"&gt"*',normalize-space(.),'*"&lt"/name2"&gt"*')"></xsl:value-of>
</xsl:for-each>
</Body>
</row>
</xsl:for-each>
</ns0:target_mt>
</xsl:template>
</xsl:stylesheet>
output you can see from link below
http://postimage.org/image/2c7bzo478
Hope this helps.
Hi,
Could you please kindly let us know if the solution is working properly as per your requirement?
regards
Anupam
Edited by: anupamsap on Jul 26, 2011 6:29 AM
Edited by: anupamsap on Jul 26, 2011 4:10 PM -
How to choose between XSLT & JAVA Mapping.
HI
Usually Java mapping is preferred when the target structure is relatively complex and the transformation cannot be accomplished by simple graphical mapping.
When to use Java mapping
1) Java mapping are used when graphical mapping cannot help you.
Advantages of Java Mapping.
1)you can use Java APIs and Classes in it.
2) file look up or a DB lookup is possible
3) DOM is easier to use with lots of classes to help you create nodes and elements.
Java mapping can be used when you have complex mapping structures.
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10dd67dd-a42b-2a10-2785-91c40ee56c0b
Java Mapping (Part I)
https://Difference in using java,xslt,message mapping
Java Mapping (Part I)
Java Mapping (Part II)
Check these for JAVA Mapping
Java Mapping (Part I)
Java Mapping (Part II)
Java Mapping (Part III)
Testing and debugging
Testing and Debugging Java Mapping in Developer Studio
Implermenting JAVA Mapping in PI
Implementing a Java Mapping in SAP PI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10dd67dd-a42b-2a10-2785-91c40ee56c0b
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/400ee77e-f9d6-2a10-2b8c-99281a4dcf6b
XSLT mappings can be imported into the Integration Repository; java methods can be called from within the XSLT style sheet. Advantages of this mapping are: open standard, portable, extensible via Java user-defined functions
XSLT Mapping
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/006aa890-0201-0010-1eb1-afc5cbae3f15
xpath functions in xslt mapping
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=xslt+mapping&adv=false&sortby=cm_rnd_rankvalue#
XSLT MAPPING:
Generic XSLT Mapping for SAP XI,Part I
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
Generic XSLT Mapping for SAP XI,Part II
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
XSLT: Recursive Templates
XSLT: Recursive Templates
Easy RFC lookup from XSLT mappings using a Java helper class
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14
Step u2013 By u2013 Step Simple Approach for XSLT Mapping
Step By Step Simple Approach for XSLT Mapping
Advantages of using XSLT mapping
XSLT program itself defines its own target structure.
XSLT programs can be imported into SAP XI. Message mapping step can be avoided. One can directly go for interface mapping once message interfaces are created and mapping is imported.
XSLT can be used in combination with graphical mapping.
Multi-mapping is also possible using xslt.
XSLT can be used with ABAP and JAVA Extensions.
Disadvantages of using XSLT mapping
Resultant XML payload can not be viewed in SXMB_MONI if not in XML format (for service packs < SP14).
Interface mapping testing does not show proper error description. So errors in XSLT programs are difficult to trace in XI but can be easily identified outside XI using browser.
XSLT mapping requires more memory than mapping classes generated in Java.
It all depends upon the required Scenario and the requirement , which mapping has to be used.
cheers -
When do we go for ABAP mapping and Java mapping
Hi friends,
At present I am working on graphical mapping in XI ,can you guys give me with an example or scenario when do we use ABAP mapping , Java mapping or XSLT mapping.
Thanks in advance
Sud<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/forums">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/forums</a>
I have standard XSLT mapping programs available for my scenarios, so use XSLT mapping. Similarly with Java mapping, For most scenarios, message mapping does the job too well. Abap mapping similarly is used to leverge existing ABAP base. If message mapping becomes confusing and hard to follow with too many functions, I go for Java mapping (just my way). I havent used ABAP mapping thus far.
Discussing ABAP mapping
ABAP mapping is developed in ABAP work bench. ABAP mapping needs to be transported to integration server and XI does not support this transport and have to do with ABAP transports.
Customers who can develop mapping program on SAP web AS and can transport them there can use ABAP mapping
*ABAP mapping programs cannot access the value table
*Since ABAP mappings are executed on ABAP stack SAP does not provide any ABAP mapping programs
*ABAP mapping programs must exists with one single version in IS, unlike JAva and XSLT mapping that can have multiple versions of mapping program
Regards,
Priya
priya k
null -
Is it possible to call XSLT from Java Mapping Class?
Hi,
does someone have experience with this? Or any ideas?
And, if yes, how can be this XSLT called? Is it necessary to specify special path? Or it is the XSLT file placed in the same directory?
Thanx in advance, Peter
Message was edited by: Peter JarsunekHi SUdhir,
Thanx 4 your answer. I have seen this link before, but there is only Java->Java or XSLT->Java calling.. I need Java->XSLT.. When I create Java mapping, I want to use stored XSLT stylesheet to convert the message. Because, my problem is,that my primary message contains characters which I want to be changed. For this reason I need java class - to replace the characters. And then I want to do transformation with the XSLT stylesheet. Can you post some example?
Thanx, Peter -
Hello -
I have a java mapping and a message mapping implemented in one interface.
Java mapping basically adds a header and does nothing else.
Message mapping has all the mapping. Its not complex but straight.
I have the Message mapping first and then the Java mapping in the Interface Mapping.
what happens is i could see the headers written through Java mapping in my output xml file which is good but i cannot view the message mapping output in the file.
Any ideas.
Thanks,
TirumalHi
I am generating the headers in the java mapping using this:
public void startDocument ()
throws SAXException {
write("<?xml version='1.0' encoding='UTF-8'?>");
write("<!DOCTYPE cXML SYSTEM 'http://xml.cxml.org/schemas/cXML/1.1.008/cXML.dtd'>");
Maintain Order at Runtime is checked in the Interface Determination.
Ok, in the interface Mapping Editor i get 2 messages:
1.
11:09:48 Start of test
Call method execute of the application Java mapping com.sap.xi.tf._Orders_MM_
Java mapping com/sap/xi/tf/_Orders_MM_ completed. (execute() of com.sap.xi.tf._Orders_MM_
Call method execute of the application Java mapping com.sap.aii.mapping.api.SampleWithSaxParser
Java mapping com/sap/aii/mapping/api/SampleWithSaxParser completed. (execute() of com.sap.aii.mapping.api.SampleWithSaxParser
Executed successfully
11:09:48 End of test
2. XML not well formed
None of the above messages seem to be of Message Mapping don't know why its not getting written in the output.
Thanks,
Tirumal -
Handling Multi hierarchial Structure using XSLT or Java Mapping in XI
Hello Experts,
I have an requirement wherein i have sender as IDOC and File as Receiver.My target File structure is multi hierarchial with parent level and many child sub level node.
I tried to generate flat structure using graphical mapping by creating an intermediate structure and then mapping it to flat structure but that seems to be very complex for my scenario as there are many sub level at target structure..
Is there any simple way of handlng these????
ThanksHi ,
I tried to implement your solution ..I am able to convert my idoc to XMLusing XLST but i have a question that how to convert that XMP to flat file as XI Receiver File adapter understand only 1st level of hierarchy..It doesnt understand nested level of hierarchy which is in my case...
Below is the xslt code which i have written:
<?xml version="1.0"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
<MT_SALES_PO_DATA_INBOUND>
<xsl:value-of select="WPUBON01/IDOC"/>
<xsl:for-each select="WPUBON01/IDOC/E1WPB01">
<E1WBBB01>
<Store_ID>A001</Store_ID>
<SYS_INVOICE_NO>
<xsl:value-of select="substring(BONNUMMER,'3','15')"/>
</SYS_INVOICE_NO>
<Cashier_ID>
<xsl:value-of select="KASSID"/>
</Cashier_ID>
</E1WBBB01>
</xsl:for-each>
<xsl:for-each select="WPUBON01/IDOC/E1WPB01/E1WPB02">
<E1WBB02>
<Transaction_Type>
<xsl:value-of select="VORGANGART"/>
</Transaction_Type>
<Article_Description>
<xsl:value-of select="QUALARTNR"/>
</Article_Description>
<ITEM_CODE>
<xsl:value-of select="ARTNR"/>
</ITEM_CODE>
<xsl:for-each select="WPUBON01/IDOC/E1WPB01/E1WPB02/E1WBB03">
<E1WBB03>
<Condition_Type>
<xsl:value-of select="KONDITION"/>
</Condition_Type>
<xsl:for-each select="">
<E1WBB04>
<TAX_Code>
<xsl:value-of select="MWSKZ"/>
</TAX_Code>
<TAX_Amount>
<xsl:value-of select="MWSBT"/>
</TAX_Amount>
</E1WBB04>
</xsl:for-each>
</E1WBB03>
</xsl:for-each>
</E1WBB02>
</xsl:for-each>
</MT_SALES_PO_DATA_INBOUND>
</xsl:template>
</xsl:stylesheet>
Any idea how do i convert these XML to falt file USing XSLT or File Receiver adapter in XI???
Thanks -
PI 7.4 Single Stack - OS Command and Java Mapping Trace
Hi,
Since ABAP stack is not avilable how to use the OS command and also want to know how to check the trace for java mapping since sxmb_moni is not avilable.
Please send me some link for 7.4 or 7.31 single stack document.
Thanks
Jignesh shahJo Jignesh,
Please see the document below.
Mapping Trace in SAP PI 7.31 Single Stack
Regards,
Jannus Botha -
Hello
Folks
I have business requirement as below.
X is a FMCG (Fast moving consumer Good) company. Need to take the financial transaction from customers per day 1 Million.
When X company takes an electronic cash (Credit card). It need to communicate with X1 (Bank with legacy system).
My question:
Ideally what kind of mapping makes my Integration process an error free. Say less monitoring work. Less support.
Basically I am looking for a RUGGED mapping process.
Thanks in advance for your answer and co-operation
Regards
Ashok BabuHi Babu,
<b>Ideally what kind of mapping makes my Integration process an error free. Say less monitoring work. Less support.</b>
Thats depends upon ur requirement.Best is to use Graphical mapping as it is easy to use and not that much complex compare to other mappings.But some in some complex scenario..JAVA/XSLT maaping is useful....
Check here the mapping performance...
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
regards
BILL
Use a Good Subject Line, One Question Per Posting - Award Points
Maybe you are looking for
-
Running 2 displays with the 2012 Macbook Air
I purchased the Toshiba Dynadock U3 - which ran well with Win 7- hoping there would be drivers for the Mac OS. Anyone have any ideas how I can accomplish this configuration? If not, then what is the next best configuration where I do not have to kee
-
Continued Spotlight Indexing Problems
I'm still having problems with Spotlight indexing my drives into infinity. I just had a new 320g drive installed on my machine and, as I've posted before, Spotlight went ballistic trying to index it, telling me it had "2147483648 hours remaining" to
-
How to access Access List information through SNMP?
Hi, I wonder if it is possible to access a router's access lsit info (acl type, name, entries, stats) through SNMP. Using the SNMP Object Navigator I have found a MIB and OIDs that should allow me to do just that: Object ciscoACLMIB OID 1.3.6.1.4.1.
-
Sending Customer Invoices by Email
Hi, I would like to Configure this functionality where instead of printing reports they are sent out by email to the customers. I am a Basis consultant and i have configured in the SAP system so that SMTP is working and we can send external email fro
-
Printer only spits out blank sheets
I have a photosmart 7550 and all I get when trying to print photos or even word documents is a blank page. I just installed three new print cartridges (56, 57, & 58). The calibration and diagnostic pages came out fine. I replaced the USB cable and th