XY board 60 x 60 mm with easy LabVIEW interface
I am looking for a vendor of an XY-board that can travel 60 x 60 mm,
and with an easy interface towards LabVIEW. Anybody got some
recommendations ?
Martin
I'm not totally sure what you mean by XY-board. A quick google search for the term gives tablets and led displayes.. If this is what you search NI offers a LCD 4,3" 16:9 ratio it has serial interface through VISA programming.
http://sine.ni.com/nips/cds/view/p/lang/sv/nid/212315
If this is not at all what you seek please try to elaborate what you mean by XY-board that can travel 60x60mm
Best Regards
Jonas Mäki
Applications Engineering
National Instruments
Similar Messages
-
Problems with matlab labview interface
I wrote a code to check the interface of Matlab and LabView. I am reading a matrix from a file and created two 1D subarrays using index array out of it. I am passing the subarray as input in the matlab script to calculate its length. With subarray 2 in the vi I am getting the result I expect. When I choose the subarray 1 as input to the Matab script, LabView crashes.
Is there any problem with my code?
There is no need to host files somewhere else. Feel free to upload them to the forums and attach them to your post.
Minor comments first. Why are you re-reading your config file every 2 seconds? Do you expect it to change? If not then read it once and don't read it again.
I think it would be best if you stopped when an error occured, you can do this by wiring an error to the Or going into the stop condition, or use the compound arithmatic with Or.
But I think the major issue you have is that your Arduino reference can be wipped out if you do things wrong. If your equal comparision is false you go to the false case, where you aren't passing the arduino reference. So when you go to close you won't close your reference, and your hardware will still be open, and trying to run again will result in an error. Similarly if your for loop runs for 0 iterations your reference is lost. Attached is an updated version which has some of these changes.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.
Attachments:
Prueba 1 Hooovahh Edit2.vi 765 KB -
Error when save word file with easy dms
Hey,
When I want to save an word file with easy dms I got the following error:
"An error occured while creating the original attribute for WWI".
I have no idea why.
Thanks for your support.
BR,
ChristophHi Christoph,
You need to check the following configurations
1) Transaction DC20: Whether data carrier has been defined
2) Transaction DC10: Define document types
3) Transaction DC30: Define workstation application
4) Transaction OAC0: Define content repositories
5) Transaction CSADMIN: Check status of content repository
Regards,
Deepak Kori -
Adaptation of LIFA (LabVIEW Interface For Arduino) to other Arduino compatible boards
Hello evryone,
I am trying to use a ''Sakura board", which is an Arduino compatible board, having similar programming as Arduino. This board is manufactured by Renesas; more specifications on it can be found on the following link: http://sakuraboard.net/gr-sakura_en.html
What I would like to know, is if the firmware used for LIFA to interface Arduino with labview, or the ChipKit firmaware, can be used to this kind of Arduino compatible boards.
My aim, is to use the Sakura Board for acquiring signals from various pins(Be it digital or analog), and setting other pins (Digital) parralelly, using labVIEW, as this is done using LIFA, or LabVIEW interface for ChiKit!!
Thanks in advance for your support.I haven't had any experience with the Sakura board, so can only go on the information on the website.
I've used the Arduino LabVIEW interface previously, and it basically uses serial communications between the PC and the Arduino. This serial interface is provided by the on-board USB-serial converter (an ATMega8u2 running custom firmware).
From what I can tell about the Sakura, it appears as a storage device when plugging into a PC, and doesn't seem to have a USB to serial converter. If this is the case, then the LIFA toolkit won't work. That said, my understanding of the Sakura board may be incorrect (for example I'm unsure what operation modes the slide switch changes between). If you can confirm it has a USB-serial port then LIFA may work. I guess the key thing is that the serial port is required.
You may be able to use a software serial port (http://arduino.cc/en/Reference/SoftwareSerial) on the Sakura to communicate with a PC, though that would require a PC with a serial port, or an external USB-serial converter. This approach would also require you to modify the LIFA arduino code (located in vi.lib\LabVIEW Interface for Arduino\Firmware\LIFA_Base) to reference the software serial port. It's probably a long shot that this will work, as the software serial library has been written for AVR chips, making use of their specific internal timers. -
Problems with USB Audio Interface
My Behringer mixing board came with a USB Interface so I can out put the audio from the board into my laptop via USB. The trick is though Logic recognizes it and I can record say microphone audio from the board on Logic, I cannot hear the tracks that already on Logic. For instance, say I want to record a vocal track onto something I have created on Logic. Logic will let me record the microphone vocal but it won't allow me to hear the track, rendering it useless. It is a very simple USB interface and I have been thinking of upgrading but I am wondering if it something I am doing wrong on Logic. Any thoughts?
Kenwhen you select , lets say the USB device in your audio preferences, it will be used as the input and output device. You can use the USB interface's audio outs plugged into your mixer, and use speakers or the headphone jack. When you create an aggregate device, using the USB device and your built in audio, and choose it in your audio preferences, this allows you to use the inputs and outputs of both the USB interface and your built in audio from your mac. So now you can record from one device while listening back on another. meaning you can record the audio from the USB device and listen back using your Mac speakers or from headphones plugged into your mac.
if you get a better audio interface, one with mic inputs, you will still need to connect it to speakers or plug in headphones to it to hear audio. If you have the budget, a dedicated firewire audio interface will usually give better results, in audio quality, than a behringer mixer and a usb interface. -
Audio problems with an USB interface
Hi everyone, this is my first post and glad to finally do it.
I am so pleased with arch linux, it's just simply amazing. I have learnt a lot following the wikis, it's pretty simple and effective.
I managed to install and configure ssh server, samba server (surprisingly easy), usb samsung laser printer, nvidia drivers, KDE desktop (so fast in arch), fonts, cpu scaling and I'm so happy with the results and perfomance.
The only problem I ran into is about audio, I think the wiki on audio is pretty incomplete (don't get me wrong I enjoy your work).
The problem is with an USB interface line 6 toneport gx (http://line6.com/toneportgx/), I know the device is meant to be an usb guitar interface but since I don't longer play guitar I use it as soundcard. As complementary information it works with no problem on Ubuntu 10.04 (which is the distro I came from).
The interface works and it's unmuted since I dmix does not work when I try to play sounds from different sources I had to install pulseaudio. Pulseaudio works partially, the sound was improved and finally I am able to play different sources. The big problem is when high cpu load ocurrs the the audio dies and does not come back even when the cpu loads decrease.
Any help is appreciated.
Thanks.You may want to debug pulseaudio (check their wiki to see how, involves running pulseaudio in verbose mode) to see what happens.
-
How to open labview program with Quit Labview function inside?
Hi Any idea how to open labview program with Quit Labview function inside?
I forgot to add and set the condition of the type for this program.
If the program is an application, it would close straight away.
If it is still labview work, it will go straight to editing program without closing.
So I need to recover, open it and make some changes.
Clement
Solved!
Go to Solution.Put the VI in a project and open it from there, then it shouldn't autorun. You can use App.kind property of application to decide whether to close or not.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV -
Terms of payment in sd module along with the fico interface
Explain breifly abou the terms of payment in sd module along with the fico interface?
Hi,
See the the SAP documentation of Daylimit.
For terms of payment which depend on whether or not the baseline date is
after or before the 15th of the month, you can define a two-part payment
term under the same terms of payment key. The terms of payment key is
expanded by the day limit entered here. Thus there are two entries in
which different terms can be specified.
In your case,
if rbkp-bldat is between 1st and 5th of the month, extract
data related to t052-ztagg = '05'.
If rbkp-bldat is between 6th and 20th of the month, extract
data related to t052-ztagg = '20'.
if rbkp-bldat is between 21st and end of month, extract
data related to t052-ztagg = '31'
Regards
Vinod -
Problems with SOAP Adapter/Interface
Hi Experts,
we currently try and experiment with XI 3.0 Stack 09 and the SOAP adapter respectively.
We started with a simple interface (foo..., see wsdl attachment) that we want to provide by XI.
All configurations (SLD, Integration Repository, Integration Directory) should have been done accordingly as we suppose, similar to other szenarios we have already implemented.
When we send a SOAP request based on a generated wsdl to XI we get the exception at the bottom of this text, containing e.g.
com.sap.aii.messaging.srt.BubbleException: error during conversion [null "null"];
com.sap.aii.messaging.util.XMLScanException: Parsing an empty source. Root element expected!
For sending the SOAP message we used XMLSpy.
Did someone have similar problems or can give us an working WSDL example, or some hint?
Thanks in advance,
Klaus Lukas
foo.wsdl
<?xml version="1.0" encoding="ISO-8859-1"?>
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:p1="urn://poreceive.xi.pse.siemens.com" targetNamespace="urn://poreceive.xi.pse.siemens.com" name="foo_out_sync">
<wsdl:types>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn://poreceive.xi.pse.siemens.com" targetNamespace="urn://poreceive.xi.pse.siemens.com">
<xsd:element name="foo" type="foo_DT"/>
<xsd:complexType name="foo_DT">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fe0bb241d2a011d9cd15e9729ee2f568
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="item" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fe0bb240d2a011d9acede9729ee2f568
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</wsdl:types>
<wsdl:message name="foo">
<wsdl:part name="foo" element="p1:foo"/>
</wsdl:message>
<wsdl:portType name="foo_out_sync">
<wsdl:operation name="foo_out_sync">
<wsdl:input message="p1:foo"/>
<wsdl:output message="p1:foo"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="foo_out_syncBinding" type="p1:foo_out_sync">
<soap:binding xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="foo_out_sync">
<wsdl:input>
<soap:body xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="foo_out_syncService">
<wsdl:port name="foo_out_syncPort" binding="p1:foo_out_syncBinding">
<soap:address location="http://xxxxxxxx:8000/XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out&version=3.0&Sender.Service=Foo_SOAP_Service&Interface=urn%3A%2F%2Fporeceive.xi.pse.siemens.com%5Efoo_out_sync" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
soap message incl. error
<?xml version="1.0"?>
<!-- see thedocumentation -->
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>error during
conversion</faultstring>
<detail>
<s:SystemError
xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>XMLScanException</code>
<text><![CDATA[
com.sap.aii.af.mp.module.ModuleException
at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process
(XISOAPAdapterBean.java:697)
at
com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl3.process
(ModuleLocalLocalObjectImpl3.java:103)
at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process
(ModuleProcessorBean.java:221)
at
com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process
(ModuleProcessorLocalLocalObjectImpl0.java:103)
at com.sap.aii.af.mp.soap.web.MessageServlet.doPost
(MessageServlet.java:543)
at javax.servlet.http.HttpServlet.service
(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service
(HttpServlet.java:853)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet
(HttpHandlerImpl.java:385)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleReques
t(HttpHandlerImpl.java:263)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:340)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:318)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebConta
iner(RequestAnalizer.java:821)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.handle
(RequestAnalizer.java:239)
at com.sap.engine.services.httpserver.server.Client.handle
(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request
(Processor.java:147)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessio
nMessageListener.process(ApplicationSessionMessageListener.java:37)
at
com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner
.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:162)
Caused by: com.sap.aii.messaging.srt.BubbleException: error during
conversion [null "null"]; nested exception caused by:
com.sap.aii.messaging.util.XMLScanException: Parsing an empty source.
Root element expected!
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.onResponseToWS
(XMBWebServiceExtension.java:936)
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.invokeOnResponse
(XMBWebServiceExtension.java:602)
at com.sap.aii.messaging.srt.ExtensionBubble.onMessage
(ExtensionBubble.java:58)
at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process
(XISOAPAdapterBean.java:576)
... 20 more
Caused by: com.sap.aii.messaging.util.XMLScanException: Parsing an
empty source. Root element expected!
at com.sap.aii.messaging.util.StreamXMLScannerImpl.open
(StreamXMLScannerImpl.java:104)
at com.sap.aii.messaging.mo.DefaultItem.setData
(DefaultItem.java:294)
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.makeItemFromPayload
(XMBWebServiceExtension.java:972)
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.onResponseToWS
(XMBWebServiceExtension.java:879)
... 23 more
]]></text>
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>Hi Klaus
In your wsdl file the soap address tag (given below)
<b><soap:address location="http://xxxxxxxx:8000/XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out&version=3.0&Sender.Service=Foo_SOAP_Service&Interface=urn%3A%2F%2Fporeceive.xi.pse.siemens.com%5Efoo_out_sync" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"/></b>
is to be edited as
<b><soap:address location="http://xxxxxxxx:50000//XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out" /></b>
because the soap address format should be like :
<i>http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel</i>
For more information :
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
Hope this will be helpful.
Regards
Suraj -
Problems with Java AQ interface migrating 9i to 10g
Hi!
I've got problems with Java AQ Interface migrating from 9i DB, JDBC, AQ to 10g rel.2 DB, JDBC, AQ
First, i started to occasionally receive NullPointerException in Oracle JDBC 9.2.0.8
java.lang.NullPointerException
at oracle.jdbc.driver.OracleStatement.describe(OracleStatement.java:6439)
at oracle.jdbc.driver.OracleStatement.get_column_index(OracleStatement.java:6203)
at oracle.jdbc.driver.OracleResultSetImpl.findColumn(OracleResultSetImpl.java:1557)
at oracle.jdbc.driver.OracleResultSet.getString(OracleResultSet.java:1543)
at gpnic.messaging.LDAPMessenger.messageFromRS(Unknown Source)
We were using 9.2.0.8 JDBC and 9i and 10g databases.
We decided to go up for 10g r2 JDBC Drivers, and 10.2 AQ but started to get the following errors:
oracle.AQ.AQOracleSQLException: ORA-25216: invalid recipient, either NAME or ADDRESS must be specified
ORA-06512: на "SYS.DBMS_AQIN", line 454
ORA-06512: на line 1
at oracle.AQ.AQOracleQueue.enqueue(AQOracleQueue.java:1267)
at gpnic.comm.messaging.transport.AQTransportAdapter$AQDestanation.send(AQTransportAdapter.java:607)
at gpnic.comm.messaging.transport.OutboundThread.run(OutboundThread.java:83)
I'm specifying address of an agent, but oracle says I am not.
I tried both native AQ and JMS interfaces, bot got the same error. I specify recipient the following way:
'consumer' var contains name of AQ agent and is not null
native AQ interface:
aqSess = AQDriverManager.createAQSession(db_conn);
AQQueue destQ = aqSess.getQueue(schema, queue);
dequeueOptionsOut = new AQDequeueOption();
dequeueOptionsOut.setWaitTime(AQDequeueOption.WAIT_NONE);
dequeueOptionsOut.setConsumerName(consumer);
dequeueOptionsOut.setDequeueMode(AQDequeueOption.DEQUEUE_REMOVE);
dequeueOptionsOut.setNavigationMode(AQDequeueOption.NAVIGATION_FIRST_MESSAGE);
AQMessageProperty mpOut = new AQMessageProperty();
Vector vRecpt = new Vector();
vRecpt.add(new AQAgent(consumer, null, 0));
mpOut.setRecipientList(vRecpt);
AQMessage aqMsg = null;
AQEnqueueOption eOpt = null;
//prepare message
aqMsg = destQ.createMessage();
CLOB chMsg = CLOB.createTemporary(db_conn, true, CLOB.DURATION_SESSION);
chMsg.open(CLOB.MODE_READWRITE);
chMsg.putString(1,msg);
//creating oracle type message
gpnic.db.SDSTypes.SdsMsgT oraMsg = new gpnic.db.SDSTypes.SdsMsgT(chMsg);
AQObjectPayload payload = aqMsg.getObjectPayload();
payload.setPayloadData(oraMsg);
//setting properties
aqMsg.setMessageProperty(mpOut);
//do enqueueOut
eOpt = new AQEnqueueOption();
destQ.enqueue(eOpt, aqMsg); //<- here AQOracleSQLException is thrown
JMS interface to Oracle AQ:
TopicSession session;
TopicConnection connection;
TopicPublisher publisher;
AQjmsAgent[] recipientList;
connection = AQjmsTopicConnectionFactory.createTopicConnection(db_conn);
session = connection.createTopicSession(true, Session.CLIENT_ACKNOWLEDGE);
connection.start();
Topic topic = ((AQjmsSession) session).getTopic(schema, queue);
publisher = session.createPublisher(topic);
recipientList = new AQjmsAgent[1];
recipientList[0] = new AQjmsAgent(consumer, null);
CLOB chMsg = CLOB.createTemporary(db_conn, true, CLOB.DURATION_SESSION);
chMsg.open(CLOB.MODE_READWRITE);
chMsg.putString(1,msg);
//creating oracle type message
gpnic.db.SDSTypes.SdsMsgT oraMsg = new gpnic.db.SDSTypes.SdsMsgT(chMsg);
AdtMessage adtMessage = ((AQjmsSession)session).createAdtMessage();
adtMessage.setAdtPayload(oraMsg);
((AQjmsTopicPublisher) publisher).publish(adtMessage, recipientList); <- here Exception is thrown
We tried the following combinations
9i DB, 9i jdbc, 9i aq - enqueue ok
10g DB, 9i jdbc, 9i aq - enqueue ok
10g DB, 10g jdbc, 10g aq - exception is thrown
Can anyone help?Duplicate post, please check Upgrade 9i to 10g
-
I'm trying to create an "ExtraLarge" VM with multiple NICs. The New-AzureVM returns the following error:
BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network
interfaces are not supported in the same deployment, also a virtual machine having no secondary network interfaces
cannot be updated to have secondary network interfaces and vice-versa.
But I have no other VMs. Or at least I did and then deleted them and all their disks. The service has no deployments (either staging or production).
Why is New-AzureVM complaining about a mismatch of VMs with and without secondary network interfaces when no other VMs exist?
I have tried many things to fix this, including the deletion of ALL of my resources. I have deleted and created the service many times, both with an affinity group and without. I have a screen print of the -debug output if your interested.
Thanks for the outstanding help.Hi Ron,
IMPORTANT NOTE: Please do not post the CONFIDENTIAL DETAILS ever on the public forums, this is HIGH RISK action.
Please send an email with your contact details to my email
[email protected] so that I guide you on steps which help you come out of the current scenario. Thank you for understanding.
I suggest you to create a new VNET and new VM with cloud services. Create Multiple NIC VM. Let us know the results.
Ref:
http://azure.microsoft.com/blog/2014/10/30/multiple-vm-nics-and-network-virtual-appliances-in-azure/
http://blogs.technet.com/b/canitpro/archive/2014/11/04/step-by-step-create-a-vm-with-multiple-nics-in-azure.aspx
If you are unable to create a VM with multiple NIC, please open a support case as it requires more confidential information which is out of scope of FORUM support offerings.
Regards,
Girish -
Can extends keyword be used with respect to interfaces?
can extends keyword be used with respect to interfaces?
srinu269 wrote:
can extends keyword be used with respect to interfaces?Yes. An interface can extend another interface:
interface A {
public void a();
interface B extends A {
public void b();
class X implements B {
public void b() {
public void a() {
} -
Creating a Blog Template with Current BC interface
I created a website using Muse. I upgraded to the web commerce so that I could have the added features, blog, ecommerce, etc.
Now I'd like to add a blog (I came from word press) and upload a custom template (with a simple header and footer). This website would be www.mywebsite.com/blog. Where can I find this information? All of the online documentation refers to an old bc interface (http://kb.worldsecuresystems.com/753/bc_753.html#main_Customizing__Blog_Layouts?bc-partner). It took me two hours, I searched the deep ends of the Internet, You Tube, and through every menu in the current bc interface until I realized this. The time I saved using Muse was wiped out looking for this information.
All I want to do is add a custom template and post a few blogs. Is there documentation that explains this step-by-step with the current interface? Any help would be appreciated.Still the same way pretty much but you can view here:
http://helpx.adobe.com/business-catalyst/using/add-blog.html
You got all this: http://forums.adobe.com/community/business_catalyst/documents
Which is on the overview page of these forums. And in there are links to 3rd party resources too. -
Solaris 10 u11 : Is it possible to mix IPMP with vertual network interface
Hi
I have a system with 4 Ethernet interfaces , I'd like to try to have virtual network interface on two of them . then configure IPMP between each two.
- Is it possible to mix IPMP and VNIC ?
- online , I found posts about having vnic on solaris by creating additional interface file (ex, /etc/hostname.bge0:1 ) and also the IPMP create such interface?
- How can I know which IPMP version installed on the system ? and how to know I'm reading the right configuration guide?
- on what basis should i choose the type of IPMP for my system (Link-based or Probe-based)
Thanks in advance
HEBAHi.
IPMP can coexist with VNIC.
IPMP - part of Solaris. So you not need check version of IPMP. Just read Docs for Solaris.
http://docs.oracle.com/cd/E23823_01/html/816-4554/ipmptm-1.html#scrolltoc
It's not clear what Vnic you plan use. Is it VLAN or just additional IP on interface ?
For test address of IPMP you should configure interface like bge0:1 with additional options.
Regards. -
Itunes COM SDK: cannot register function with iTunes Outgoing Interface
I am doing benchmarks and I want to time the encoding of a Music CD. In order to stop the "clock" and compute the time I am trying to bind a function with the _IITConvertOperationStatusEvents::OnConvertOperationCompleteEvent()
I am writing a AutoIt script and I can create the iTunes application object but when I use the ObjEvent function to register my function with the event above it causes a COM exception to be raised and the ObjEvent completes with an error. The exception code I get is 80040200 which seems to be a generic error.
$objApp=ObjCreate("iTunes.Application")
$SinkObject=ObjEvent($objApp, "ITEvent", "_IITConvertOperationStatusEvents")
<<exception 80040200>>
Browsing the iTunes COM TypeLib the _IITConvertOperationStatus does not seem to be a child in the iTunes object hierarchy so I think this is way the exception is being raised. I have tried to register another function with another outgoing interface and this works just perfectly: _IiTunesEvents::OnQuitting()
Do I need to create another object which gets passed as the first parameter to the ObjEvent function?
*Here is the entire script:*
$ITSourceKindAudioCD = 3
$begin = 0
Global $trackName, $progressValue, $maxProgressValue, $SinkObject
$oMyError = ObjEvent("AutoIt.Error","MyErrFunc") ; Install a custom error handler
$objApp = ObjCreate("iTunes.Application")
If @error Then
MsgBox(0, "ObjCreate", "Create Object Failed", 3)
Exit
EndIf
$event = ObjEvent($objApp, "ITEvent1_", "_IiTunesEvents")
If @error Then
MsgBox(0, "Failed", "IiTunesEvent binding failed", 5)
Exit
EndIf
$SinkObject = ObjEvent($objApp, "ITEvent_", "_IITConvertOperationStatusEvents") ; Assign events to UDFs starting with IEEvent_
If @error Then
MsgBox(0, "ObjEvent binding", "ObjEvent failed!", 10)
$objApp.Quit()
Exit
EndIf
$colSources = $objApp.Sources
$begin = TimerInit()
For $objSource in $colSources
If $objSource.Kind = $ITSourceKindAudioCD Then
$strName = $objSource.Name
$colPlaylists = $objSource.Playlists
$objPlaylist = $colPlaylists.ItemByName($strName)
$colTracks = $objPlaylist.Tracks
$objApp.ConvertTracks2($colTracks)
EndIf
Next
Do
; Wait around for the ripping to complete
Until False
; This is my custom error handler
Func MyErrFunc()
$HexNumber = hex($oMyError.number,8)
Msgbox(0,"","We intercepted a COM Error !" & @CRLF & _
"Number is: " & $HexNumber & @CRLF & _
"Windescription is: " & $oMyError.windescription )
EndFunc
Func ITEvent1_OnQuittingEvent()
MsgBox(0, "Bye", "Bye-Bye", 10)
EndFunc
func ITEvent_OnConvertOperationCompleteEvent()
$dif = TimerDiff($begin)
MsgBox(0,"Time Difference",$dif)
$objApp.Quit()
EndFuncmuch of this is speculation because I can't remember how many previous versions of iTunes were on these machines...but this is what we're seeing:
extra entries in two registry keys... when it didn't work these two registry entries contained "AppID" values:
HKEYCLASSESROOT\CLSID\{B9E1D2CB-CCFF-4AA6-9579-D7A4754030EF}\Implemented
Categories
HKEYLOCALMACHINE\SOFTWARE\Classes\CLSID\{B9E1D2CB-CCFF-4AA6-9579-D7A4754030EF}
with the APpID set to the same iTunes CLSID string:
{B9E1D2CB-CCFF-4AA6-9579-D7A4754030EF}
and when it did work the AppIDs entries were gone. this is only on XP.
on vista there never was any AppID entry.
but, again, i wonder if that was added by previous versions of iTunes which we didn't install on the vista machines...
Also, worthy of noting is this post from Apple:
http://support.apple.com/kb/HT1925
ciao, raza
Maybe you are looking for
-
How can i get my ipod touch to sync with my mac & itunes?
I've already restarted and reset ALL of my settings in my ipod touch. I even erased all of my music, if that helps. I' ve updated my itunes to the latest version twice. I've restarted my mac numerous times. My ipod touch will not sync at all. It won'
-
Internal Order for AUC Asset not getting created Automatically
As per SAP Standard , when I create an AUC Internal Order (KO01), and save , AUC asset is gets created automatically ted via AS01 and stores the AUC Asset in Internal Order settlement rule. However when tried with the client Im not able to create,
-
Install RAR problem in websphere
I am trying to install the RAR from 3.0 RC1 into Websphere 5.0 (inside Websphere application developer studio) and I keep getting this error when I click ok on the New Resource Adaptor page. Any ideas? [10/14/03 10:50:18:204 PDT] 510f4349 SystemErr R
-
I have a gen 1 ipod touch. Yesterday it began stopping for no reason at all.
My ipod touch is stopping after playing for a few mintes. These are items that I have downloaded and are playing, not streaming
-
HT1386 Will I loose apps if I sync?
I just updated my iMac and have os 10.6.3. Haven't updated or synced my iphone since purchase 4 (4.2.6). I am concerned about loosing everything on my iphone.