XY Graph Cursor - Changing its style

Hi,
Is there a way to change the style of the cursor at the xy graph to an icon that I made?
Regards.

Hi,
Here follows a link with informations abou XControl and how o create it.
http://www.ni.com/white-paper/3198/en/
Thiago Matos
Engenharia de Aplicações
National Instruments Brasil

Similar Messages

How do I get an event-based response to a graph cursor change?

I want to respond to the user moving a cursor on a data (X-Y) graph. (LV 7.0)
What I really want is an event called "Graph.Cursor.Value Change", which would supply me with the new coordinates, but I see no such event.
If I use the MOUSE MOVE event to trigger obtaining the cursor values, it does not give me an event, until the cursor has stopped moving, the button is up, and the mouse moves off the cursor line.
Sure, I could use a TIMEOUT event, and read it every 100 mSec, but I don't like the time lag.
What I did was to set a flag TRUE on Graph.MouseDown and FALSE on Graph.MouseUp. I then choose an event timeout of 10 mSec or -1, depending on that flag.
That works, but is there a more direct way that I'm missing?
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

No, unfortunately there is not.
To code around this limitation, I typically use the timeout event in a more complex way as follows:
The timeout is wired to a shift register that is initialized with "-1" (no timeout). The value from the shift register then crosses the event structure and feeds to the shift register on the right in almost all event cases.
I add two special event cases:
(1) "graph-mouse down" puts a small number (e.g. 10ms) in the right timeout shift register
(2) "graph-mouse up" puts again a -1 in the right timeout shift register
(x) All other event cases (incl. timeout) wire the current timeout straight across to the right shift register.
The timeout event contains the logic to read the graph cursors and associated actions.
This way there is normally infinite timeout. Once the mouse goes down on the graph, the timeout executes at relatively rapid succession until the mouse is raised again. At which point everything quiets down.
LabVIEW Champion . Do more with less code and in less time .

Change mouse cursor over graph cursor.

Is there a way to change the mouse cursor as it moves over graph cursors when using trackmode TrackDragCursor? To indicate that you can position the cursor.

You could accomplish this with the graph's CursorMouseMove event. For example, create a new project with the NI Measurement Studio AppWizard and follow these steps:
Add a graph to the dialog. Right-click on the graph in the dialog editor, click "Class Wizard ...", click the Member Variables tab and add a member variable for the graph called m_graph. Click OK.
Right-click on the graph in the dialog editor and click on "Events ...". Add an event handler for CursorMouseMove called OnCursorMouseMove and add an event handler for PlotAreaMouseMove called OnPlotAreaMouseMove. Click OK.
Go to the header file for your dialog class and add this to the bottom of the class declaration:
private:
bool m_cursorChanged;
HCURSOR m_defaultCursor;
HCURSOR m_crossCursor;
Go to the source file for your dialog class and add this to the end of the
OnInitDialog method:
m_graph.TrackMode = CNiGraph::TrackAllEvents;
m_graph.Cursors.Add();
m_cursorChanged = false;
m_defaultCursor = ::LoadCursor(NULL, IDC_ARROW);
m_crossCursor = ::LoadCursor(NULL, IDC_CROSS);
Add this to your CursorMouseMove event hander:
if (!m_cursorChanged)
:etCursor(m_crossCursor);
m_cursorChanged = false;
Add this to your PlotAreaMouseMove event handler:
if (m_cursorChanged)
:etCursor(m_defaultCursor);
m_cursorChanged = true;
Run the application. You should see that the mouse cursor changes to a cross when you mouse over the cursor.
Hope this helps.
- Elton

Why does the graph cursor (snap mode) snap to unvisible curves? How can i change that?

I display several curves in one graph. To get a better overview the user can filter unwanted curves by setting the attibute to unvisible. There is one cursor switched on in the graph with the option "snap to plot". The user can move the cursor and read the coordinates and curvename. Unfortunately the cursor snaps also to the unvisible curves. How can I block that behaviour? The cursor should only jump on the visible curves.

> with the property Cursor.Plot I can set or get the current plot number
> of the cursor, but I cannot prevent the user to move the cursor to an
> unvisible plot. Labview allows the cursor to be moved to a curve witch
> is unvisible in the graph. I want the user only to be allowed to jump
> betwen the visible curves.
>
The graph cursors can be locked to a particular plot or set to snap to
any plot/point on the screen. You cannot see invisible plots, and you
probably can't see black plots on a black background, but the graph
intentionally lets you place cursors there and other users wouldn't be
happy if it changed.
What we will likely add at some point is a way to truly show and hide a
plot. In the meantime, you can also just change w
hat is plotted.
Hidden plots can be removed, no points, and the cursors will not go there.
Greg McKaskle

Cursor changes to "Busy" when timers expires in Form

Forms 10.1.2.0.2
I created a Form with a multinline block to implement a blinking effect on certain rows depending on certain conditions
whilst using a repeating timer.
The screen is working fine so far but I am facing the problem that the cursor automatically changes its status from
normal to busy for a moment and then back from busy to normal when the timers expires.
In addition, the status bar on the console (which is the lower right working status bar) displays a "working"
condiition when the timers expires (scrolling from left to right each time the timer expires).
This leads to annoying visible effects as not only my rows are blinking fine but also the cursor does -.-
I removed the Synchronze; Built-In from the WHEN-TIMER-EXPIRED and also replaced any data processing within
the Trigger by a Null; Statement but the cursor keeps on changing its Form automatically.
I also tried to set the Cursor style to default within this Trigger but the cursor keeps on changing its Form.
Is there any way to suppress this behaviour ?

Hi,
Do you have any security programs installed on your computer? If so, temperarily turn off them to check if this issue persists.
We can also try to run Word in safe mode to test if the issue is caused to a problematic add-in. To do this, press Windows key + R, type
Winword.exe /safe in the Run dialog and press Enter.
In addition, did you installed any printer drivers? If so, some bad printer drivers may cause such issue. Please make sure you have installed the latest printer driver form the official website. If possible, we can try to uninstall the printer drivers
to check if the issue persists.
Regards,
Steve Fan
TechNet Community Support

Graph Cursor Controls

On the graph cursor control (the 4 sectioned diamond that appears withthe cursor legend) I'm wondering what the top and bottom diamond do if anything. The left and right ones are simple enough (forward or back one sample) but the top and bottom ones don't seem to do anything from what I can tell. Are they just for decoration?
Solved!
Go to Solution.

Dan,
I never noticed that before but you're right, in a multi plot graph the up/down diamonds will attach the cursor to a different plot. I never noticed before because I usually change my cursor style so as to not show the horizontal line (just shows the vertical stripe for the cursor).

Unknown graph cursor tool

I'm hoping someone can identify a graph "tool" that's interfering with my LabVIEW program. It's not on the normal graph palette and I can't find reference to it anywhere. It activates seemingly on its own during runtime, and sticks around if I abort execution (its behavior appears to be coded into the graph itself). I wasn't able to take a good screenshot of what the pointer looks like when the tool is active, so I've included a scaled-up drawing below (pointer is the black/white parts).
Some additional details:
- It usually activates when the mouse point hovers over one of the cursors on my XY graph (but only under certain conditions that are not 100% reproducible). The graph cursors are free dragging, and the tool has only activated when I had more than 1 plot on the XY graph.
- If I click on a graph cursor when this tool is active and drag in either the +/- Y direction, the Y scale min/max values change to seemingly random values and the Y scale begins scrolling up. Nothing happens if I move the cursor in purely the +/- X direction.
Much thanks in advance.

Okay, I've been able to reproduce the problem consistently in a much simpler VI (attached). It only contains is a single XY graph, with no code on the block diagram. There's some data saved on the graph, and I put a bunch of cursors on it. When I follow the steps below, I've been able to reproduce the issue 100% of the time.
I should note that I'm using LabVIEW 2014 Professional (64 bit) on Windows 7.
Attachments:
Test.vi ‏118 KB

Programmatically fire graph cursor move event

Is it possible to programmatically fire the Graph Cursor Move Event ? Assigning a value to the Cursor Index or Cursor Position property node does not seem to do it.
Solved!
Go to Solution.

The graph cursor move event contains processing code for data on the graph along with front panel display of those results. Data is put onto the graph during data acquisition which occurs in another event. When that data acquisition event finishes I need to cause the processing code to execute once to update the front panel display so its results are shown for the new acquired data.
I could put the processing code into a different event that fires on say a button value change. Then the graph cursor move event would fire that button event change by setting its value change property. The data acquisition event could also fire that button event.

How to change dynamically style in smartforms

Dear All,
I had a requirnment to select different styles in smartforms depending on some condition, can u plz suggest me any solution for this.Thanking you.
With best regards
Gaurav Lashkari

Hi,
Goto Transaction smartform.
Place radio button on style, then give <b>style name</b> and
create it.
In paragraph format right click and create node.
Give some name it wil create a node.
Double click on that node than u can
change your style by using font tab.
You can create any number of node.
Save and activate.
Then in your smartform->form attributes->output options
Give your <b>style name</b>.
Then place the cursor on the text to be modified and
select your style from paragraph format.
Thanks.

Moving xy graph cursor with mouse and programmably controlling snap to point

Hi,
I have run into a bit of a problem. I am trying to create a program which allows a user to select a location on an XY graph by simply clicking in the vacinity of the plot. Most of it is working, however I find that I can't programmably control the snap to point function reliably.
I hope this is a clear outline of the problem:
- The cursor starts in a Free state, so that when the
user clicks in the plot area, I can set the cursor
position to the nearest point by setting the
CursorPosition using the graph's property node.
- Maybe the user didn't like the chosen location and
wants to drag the cursor over a bit. Ok, user drags
the cursor to a new position.
- Now th
e cursor position is probably not exactly on
the plot trace. If, at this point, I set the cursor
to Snap To Point, the cursor does not snap to the
nearest point on the graph (relative to its current
position), but instead to the last place a _mouse_
action placed it.
- Immediately after the new location has been set,
the cursor state has to be reset to free in case I
need to programmably move the cursor again (I
can't seem to programmably control the mouse in
any state but Free)
How do I go about getting the cursor to snap to the closest point at it's new location? I'm at a loss.
Any insight you might have would be greatly appreciated.
Thanks much!
Tere

So what is the question about... I have to use XY graph in my program. It is used in Loop while cycle. It shows the statistic of a variable. I am using cursors in this graph to check the actual value of a variable in different period of time. But there are 7 variables and it is extremely hard for user to check each value independently. So I tried to make them moving on the X axis (TIME) together using the property node (cursors reading the position (only X axis, Y axis status lock to plot) of the major cursor and follow it... Everything looks great? But it did not work when I am trying to move the major cursor manually on graph... It works only when I am using the cursor movement buttons... But they work very slowly when there is a lot of data in graph.
I want to find out is it possible to make seven coursers mouthing together By the X axe and be Locked each at its plot by Y axe manually (Using mouse moving on a graph). Is it possible? If it is than how to do it?

XY Graph cursor Error

Hello
This error was found, when I started using LabView 8, with my old LabView 6.1 VI's.
I have encountered a minor error on my Graph display. I noticed my Y-Scale numbers go negative, if I Press and Hold my Graph cursor, while I am moving it.
I run this same test using New LV 8 XY Graph and numbers do not go negative, but they surely flicker a lot + numbers still change some.
Have you noticed this before? Is there some new property I need to set up, to make my LabView 6.1 Graph stable? Is this known bug or am I just doing something wrong?
Here is VI for your testing. My LabView 8 version is 8.0.0.4005.
Just run it and while moving yellow cursor (press+hold+move), after 1-2 seconds of holding something happens.
Yours
Kari
Attachments:
Cursor Test.vi ‏84 KB

Hello Karik.
I experience the exact same problem in the application I'm programming.
The only solution I have come up with is having the cursors Y-axis
centered in the visible area of the graph.
However this is really bad because there is will create a smal "hole"
in the cursor bar, it looks awfull. I think this is a bug in lv8 since
in lv7.1 I could tie down the y-axis to like -10000 or something and
the problem would not appear.
Hope NI fixes this problem really really soon.
//Andreas

XY graph cursor position bug

I have reproduced the bug mentioned here:
http://forums.lavag.org/Graph-Cursor-XY-Position-Bug-t1366.html&gopid=40859#entry40859
I've reproduced this bug (?) in Labview 8.5, with an XY graph doing
much the same as Jack. The attached zip file contains a stripped down
version of my program (originally written by my coworker, Andrew
MacDonald). Run "RENA3 Data Viewer.vi" and follow the instructions.
As Jack said, changing Cursor.PosX to Cursor.Index solves the problem.
I did not find this bug mentioned anywhere other than the above link.
Fraser
Attachments:
XY Graph Cursor Bug.zip ‏142 KB

Hi Karla,
Sorry if that wasn't as obvious as I thought! :-) Hopefully the attached image makes it clear. On the front panel, 'Cursor Channel' is inputted. This is directly wired to Histogram.Cursor.PosX. Immediately following, Histogram.Cursor.PosX is read and wired to the front panel indicator 'Cursor.Cursor Position:Cursor X'. There is always a difference of 15 or 16 between the two values. If there was no bug, these two values should be identical! I can only conclude that Labview is doing something funny...
As I mentioned before, changing Cursor.PosX to Cursor.Index fixes the problem.
A bit of background: my FWHM function outputs the peak channel, and the cursor is supposed to go through the peak so you can have a visual check that it is analyzing the right peak. I noticed that the line would never go through the peak; the line would always have an offset. After wasting a couple of hours, it became clear that I was wiring the correct value into 'Cursor.PosX', but something was going wrong beyond that.
Cheers,
Fraser
Message Edited by fjharris on 01-25-2008 11:34 AM
Message Edited by fjharris on 01-25-2008 11:36 AM
Attachments:
Labview Bug.png ‏27 KB

Mixed Signal Graph: Cursor Position Property for Multi-Plot Cursor

I'm working 6 waveforms on 3 different plot areas in a mixed signal graph in LV2009. When I try to pull the Cursor.PosY property from my cursor (in which Watch All Plots is True, and is set to Multi-Plot in the graph properties), it returns the value of only the first plot in the cluster of waveforms fed into the graph. I've tried changing the active plot, active plot area, nothing changes. I am able to retrieve each value via the cursor legend, but I cannot pull each of those values into another portion of my program. Also, I noticed that when setting events in an event structure, any events relating to a cursor drag aren't present as they are in a waveform graph. My workaround is to create an indicator for the Cursor.PosX property and monitor when that value changes, but I feel there should be an easier way. Any help is appreciated.
Thank you in advance!

Jeanius,
I am not quite sure why the cursor pos in the Wavegraph reference does not change when you change the active plot, but if you grab a reference to the specific cursor and then change the active plot things you receive the expected behavior.
Ben J.
National Instruments
Applications Engineer
Attachments:
MODDEDmixed graph cursor ex.vi ‏41 KB

Flash line chart change line style.

Hi guys,
I am migrating charts in my application from SVG to Flash.
For line charts in Flash, is there a way to change line style from solid to dashed or dotted?
Thanks in advance.

Hi,
If you're using the new AnyChart then you can using bevel...not sure how its done with the old but it must be possible. Example here: http://anychart.com/products/anychart/docs/users-guide/Samples/Sample-Line-chart-Application-of-different-styles-to-chart-elements.xml
<effects>
<bevel enabled="true" highlight_opacity="0.4" shadow_opacity="0.4" distance="2"/>
<drop_shadow enabled="true" opacity="0.3"/>
</effects>Mike

Changing a style in xss depending on the facet

Is it possible to change a style in the xss depending on the facet?
I want to change in my UIX application the prompt style of the messageTextInput components - not the contentStyle - for example underline the prompts. But I want this to happen only if facet==printable.
Can I change this once in an xss and apply it to the whole application? I know I should change the OraPromptsomething (I've found the correct one, I just don't have its name here) - but I don't know how to change it depending on the facet

So I suppose it is not possible?

XY Graph Cursor - Changing its style

Similar Messages

Maybe you are looking for