Yast2 no workflow defined error
Hi Folks,
I have an OES11SP2 VM that is fully patched as of today and I can not run the OES-Install module of Yast2. I get:
Error
No workflow defined for this installation mode.
Here's a snip of the Y2log:
Code:
2014-06-03 11:39:08 <1> s11tc03(6888) [YCP] clients/oes-install.ycp:30 mtc:oes_addon_name: Open_Enterprise_Server
2014-06-03 11:39:08 <3> s11tc03(6888) [YCP] clients/oes-install.ycp:40 OES add-on product src_id=-1
2014-06-03 11:39:08 <1> s11tc03(6888) [YCP] OesAddOnProduct.ycp:992 File /installation.xml not found, running sw_single for this repository
2014-06-03 11:39:08 <1> s11tc03(6888) [YCP] OesAddOnProduct.ycp:997 Cached OES control file /etc/opt/novell/oes-installation.xml not found
2014-06-03 11:39:08 <1> s11tc03(6888) [YCP] ProductControl.ycp:1134 Candidates: ["/etc/opt/novell/oes-installation.xml", "/y2update/control.xml", "/control.xml", "/etc/YaST2/control.xml", "/usr/share/YaST2/control/control.xml"]
2014-06-03 11:39:08 <1> s11tc03(6888) [YCP] ProductControl.ycp:1148 Reading control file: /etc/YaST2/control.xml
2014-06-03 11:39:08 <1> s11tc03(6888) [YCP] XML.ycp:113 Reading /etc/YaST2/control.xml
2014-06-03 11:39:08 <1> s11tc03(6888) [agent-xml] XmlAgent.cc(Read):758 Setting XML generic error handler
2014-06-03 11:39:08 <1> s11tc03(6888) [agent-xml] XmlAgent.cc(Read):793 Freeing generic XML error handler
2014-06-03 11:39:08 <1> s11tc03(6888) [ui] YPushButton.cc(setFunctionKey):204 Guessing button role YHelpButton for YPushButton "Help" at 0x24ce260 from function key F1
2014-06-03 11:39:08 <1> s11tc03(6888) [ui] YPushButton.cc(setFunctionKey):204 Guessing button role YCancelButton for YPushButton "Abort" at 0x24af2b0 from function key F9
2014-06-03 11:39:08 <1> s11tc03(6888) [ui] YPushButton.cc(setFunctionKey):204 Guessing button role YOKButton for YPushButton "Next" at 0x24b97b0 from function key F10
2014-06-03 11:39:08 <2> s11tc03(6888) [ui] YWidget.cc(setKeyboardFocus):613 YPushButton "Next" at 0x24b97b0 cannot accept the keyboard focus.
2014-06-03 11:39:08 <1> s11tc03(6888) [YCP] ProductControl.ycp:739 Adding wizard steps for $["mode":"installation", "stage":"normal"]
2014-06-03 11:39:08 <1> s11tc03(6888) [YCP] ProductControl.ycp:752 There are no (more) steps for $["mode":"installation", "stage":"normal"], section will be disabled
2014-06-03 11:39:08 <1> s11tc03(6888) [YCP] Mode.ycp:129 setting mode to installation
2014-06-03 11:39:08 <2> s11tc03(6888) [ui] YWidget.cc(setKeyboardFocus):613 YPushButton "Next" at 0x24b97b0 cannot accept the keyboard focus.
2014-06-03 11:39:08 <3> s11tc03(6888) [YCP] ProductControl.ycp:1203 No workflow found: []
2014-06-03 11:39:08 <3> s11tc03(6888) [YCP] Report.ycp:523 No workflow defined for this installation mode.
2014-06-03 11:39:08 <1> s11tc03(6888) [ui] YPushButton.cc(setFunctionKey):204 Guessing button role YOKButton for YPushButton "OK" at 0x1bcbce0 from function key F10
I really would like to install more OES features so what can I do?
thanks,
Andrew
Originally Posted by mselan
Well, what about when you have this problem on all of your OES servers ? Copying the file from install media as was suggested somewhere gets rid of error, but thy system then assumes this is a fresh install ...
Kliknite, če želite dodati podpis
>>> aferris<[email protected]> 4.6.14 18:56 >>>
Copying over a fresh copy of /etc/opt/novell/oes-installation.xml from
an OES server at the same SP2 level seems to have done the trick.
Andrew
aferris
aferris's Profile: https://forums.novell.com/member.php?userid=9128
View this thread: https://forums.novell.com/showthread.php?t=477453
if you add the corresponding OES ISO as an installation source you should be fine. from my experience it has to be the "local iso" option.
Similar Messages
-
DAC Workflow run error code: [36331]
Dear all ,
I want to Integrate OBIEE with Oracle R12.1.1
Initially I have defined new container & Phyiscal Data Sources in DAC
Datawarehouse Test Connection Successful
ORA_R1211 Test Connection Successful
FlatFile Connection ?
After that I created new Plan & generate the parameter and also built it successfully but when I run that execution plan it give error.
Please any one can help me regarding this issue.
also provide me step by step document to integrate OBIEE with Oracle R12.1.1
Regards,
YasirKindly See the log of last ETL run........
494 SEVERE Wed Dec 08 18:11:04 GMT+05:00 2010
START OF ETL
495 SEVERE Wed Dec 08 18:11:45 GMT+05:00 2010 Starting ETL Process.
496 SEVERE Wed Dec 08 18:11:50 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_Parameters_Update' has completed with error code 0
497 SEVERE Wed Dec 08 18:12:12 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SILOS.SIL_Parameters_Update.txt SIL_Parameters_Update
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
498 SEVERE Wed Dec 08 18:12:22 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_InsertRowInRunTable' has completed with error code 0
499 SEVERE Wed Dec 08 18:12:44 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_InsertRowInRunTable.txt SIL_InsertRowInRunTable
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
500 SEVERE Wed Dec 08 18:13:04 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_GlobalCurrencyGeneral_Update' has completed with error code 0
501 SEVERE Wed Dec 08 18:13:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_GLAccountDimension_FinSubCodes' has completed with error code 0
502 SEVERE Wed Dec 08 18:13:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_GroupAccountNumberDimension' has completed with error code 0
503 SEVERE Wed Dec 08 18:13:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_LocalCurrency_Temporary' has completed with error code 0
504 SEVERE Wed Dec 08 18:13:13 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_Stage_GroupAccountNumberDimension_FinStatementItem' has completed with error code 0
505 SEVERE Wed Dec 08 18:13:13 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_GLJournals_Full' has completed with error code 0
506 SEVERE Wed Dec 08 18:13:13 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity' has completed with error code 0
507 SEVERE Wed Dec 08 18:13:15 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_Extract_Full' has completed with error code 0
508 SEVERE Wed Dec 08 18:13:15 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_ListOfValuesGeneral_Unspecified' has completed with error code 0
509 SEVERE Wed Dec 08 18:13:18 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_ExchangeRateGeneral_Full' has completed with error code 0
510 SEVERE Wed Dec 08 18:13:41 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_GroupAccountNumberDimension.txt SDE_ORA_Stage_GroupAccountNumberDimension
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
511 SEVERE Wed Dec 08 18:13:41 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_Stage_GroupAccountNumberDimension_FinStatementItem.txt SIL_Stage_GroupAccountNumberDimension_FinStatementItem
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
512 SEVERE Wed Dec 08 18:14:18 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity.txt SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
513 SEVERE Wed Dec 08 18:14:18 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_CurrencyTypes' has completed with error code 0
514 SEVERE Wed Dec 08 18:14:18 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_GLAccount_SegmentConfig_Extract' has completed with error code 0
515 SEVERE Wed Dec 08 18:14:23 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SILOS.SIL_GlobalCurrencyGeneral_Update.txt SIL_GlobalCurrencyGeneral_Update
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
516 SEVERE Wed Dec 08 18:14:30 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_LocalCurrency_Temporary.txt SDE_ORA_LocalCurrency_Temporary
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
517 SEVERE Wed Dec 08 18:14:34 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_GLAccountDimension_FinSubCodes.txt SDE_ORA_Stage_GLAccountDimension_FinSubCodes
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
518 SEVERE Wed Dec 08 18:14:38 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSetHier_Extract_Full.txt SDE_ORA_Stage_ValueSetHier_Extract_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
519 SEVERE Wed Dec 08 18:14:42 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_ListOfValuesGeneral_Unspecified.txt SIL_ListOfValuesGeneral_Unspecified
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
520 SEVERE Wed Dec 08 18:14:43 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSet_Extract' has completed with error code 0
521 SEVERE Wed Dec 08 18:14:49 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_ExchangeRateGeneral_Full.txt SDE_ORA_ExchangeRateGeneral_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
522 SEVERE Wed Dec 08 18:14:58 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_GLSegmentDimension_Full' has completed with error code 0
523 SEVERE Wed Dec 08 18:15:05 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion' has completed with error code 0
524 SEVERE Wed Dec 08 18:15:10 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_Flatten' has completed with error code 0
525 SEVERE Wed Dec 08 18:15:10 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full' has completed with error code 0
526 SEVERE Wed Dec 08 18:15:17 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_TimeOfDayDimension' has completed with error code 0
527 SEVERE Wed Dec 08 18:16:04 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSet_Extract.txt SDE_ORA_Stage_ValueSet_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
528 SEVERE Wed Dec 08 18:16:16 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_GLAccount_SegmentConfig_Extract.txt SDE_ORA_Stage_GLAccount_SegmentConfig_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
529 SEVERE Wed Dec 08 18:16:17 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_CurrencyTypes.txt SIL_CurrencyTypes
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
530 SEVERE Wed Dec 08 18:16:25 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_GLSegmentDimension_Full.txt SDE_ORA_GLSegmentDimension_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
531 SEVERE Wed Dec 08 18:16:28 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion.txt SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
532 SEVERE Wed Dec 08 18:16:57 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSetHier_Flatten.txt SDE_ORA_Stage_ValueSetHier_Flatten
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
533 SEVERE Wed Dec 08 18:17:22 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_DeriveRange' has completed with error code 0
534 SEVERE Wed Dec 08 18:17:31 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_TimeOfDayDimension.txt SIL_TimeOfDayDimension
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
535 SEVERE Wed Dec 08 18:17:58 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_HourOfDayDimension' has completed with error code 0
536 SEVERE Wed Dec 08 18:18:21 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SILOS.SIL_HourOfDayDimension.txt SIL_HourOfDayDimension
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
537 SEVERE Wed Dec 08 18:21:36 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_GLJournals_Full.txt SDE_ORA_GLJournals_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
538 SEVERE Wed Dec 08 18:22:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_PartyContactStaging_Full' has completed with error code 0
539 SEVERE Wed Dec 08 18:22:14 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Payterm_Ap' has completed with error code 0
540 SEVERE Wed Dec 08 18:22:14 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Bank_Branch_Name' has completed with error code 0
541 SEVERE Wed Dec 08 18:22:15 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Cust_Class' has completed with error code 0
542 SEVERE Wed Dec 08 18:22:15 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Uom_Code' has completed with error code 0
543 SEVERE Wed Dec 08 18:22:16 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_CostCenter' has completed with error code 0
544 SEVERE Wed Dec 08 18:22:16 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_UserDimension_Full' has completed with error code 0
545 SEVERE Wed Dec 08 18:22:27 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Supplier_Payment_Method' has completed with error code 0
546 SEVERE Wed Dec 08 18:23:46 GMT+05:00 2010 Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Payterm_Ap
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [8.6.1 HotFix11], build [457.0505], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Wed Dec 08 18:23:43 2010
Connected to Integration Service: [Oracle_BI_DW_Base_Intergration_Service].
Integration Service status: [Running]
Integration Service startup time: [Wed Dec 08 17:05:35 2010]
Integration Service current time: [Wed Dec 08 18:23:46 2010]
Folder: [SDE_ORAR1211_Adaptor]
Workflow: [SDE_ORA_CodeDimension_Payterm_Ap] version [1].
Workflow run status: [Failed]
Workflow run error code: [36331]
Workflow run error message: [WARNING: Session task instance [SDE_ORA_CodeDimension_Payterm_Ap] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_CodeDimension_Payterm_Ap] will be failed.]
Workflow run id [103].
Start time: [Wed Dec 08 18:22:13 2010]
End time: [Wed Dec 08 18:23:38 2010]
Workflow log file: [F:\Informatica\PowerCenter8.6.1\server\infa_shared\WorkflowLogs\SDE_ORA_CodeDimension_Payterm_Ap.log]
Workflow run type: [User request]
Run workflow as user: [Administrator]
Run workflow with Impersonated OSProfile in domain: []
Integration Service: [Oracle_BI_DW_Base_Intergration_Service]
Disconnecting from Integration Service
Completed at Wed Dec 08 18:23:46 2010
=====================================
ERROR OUTPUT
=====================================
547 SEVERE Wed Dec 08 18:23:46 GMT+05:00 2010 Could not attach to workflow because of errorCode 36331 For workflow SDE_ORA_CodeDimension_Payterm_Ap
548 SEVERE Wed Dec 08 18:23:46 GMT+05:00 2010
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Payterm_Ap:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Payterm_Ap
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
=====================================
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:469)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
com.siebel.etl.engine.core.Session.run(Session.java:3246)
java.lang.Thread.run(Thread.java:619)
::: CAUSE :::
MESSAGE:::Execution of child batch Informatica Session Batch failed.
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.FailedTaskException
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:340)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
com.siebel.etl.engine.core.Session.run(Session.java:3246)
java.lang.Thread.run(Thread.java:619)
954 SEVERE Wed Dec 08 18:31:34 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSetHier_DeriveRange.txt SDE_ORA_Stage_ValueSetHier_DeriveRange
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
955 SEVERE Wed Dec 08 18:32:25 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SILOS.SIL_GLLinkageInformationGeneral_Full.txt SIL_GLLinkageInformationGeneral_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
956 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 ETL seems to have completed. Invoking shut down dispatcher after the notification from the last running task.
957 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 Finishing ETL Process.
958 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 MESSAGE:::Some steps failed.
EXCEPTION CLASS::: com.siebel.etl.engine.bore.SomeSessionsFailedException
com.siebel.etl.engine.bore.NewDispatcher.execute(NewDispatcher.java:302)
com.siebel.etl.engine.bore.NewDispatcher.run(NewDispatcher.java:121)
java.lang.Thread.run(Thread.java:619)
959 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 Dispatcher thread completed.
960 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 Number of incomplete tasks whose status got updated to stopped :0
Number of incomplete task details whose status got updated to stopped :2630
961 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010
* CLOSING THE CONNECTION POOL DataWarehouse
962 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010
* CLOSING THE CONNECTION POOL ORA_R1211
963 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010
END OF ETL
-------------------------------------------- -
Workflow Dangling Error ?
Hi ,
I am getting this error
" WFLDRLFK_FAIL
WFLDRLFK_DANGLING_REF_ACT LABEL=VERIFY_COUNTRY PROCESS_NAME=ROOT PROCESS_ITEM_TYPE=XXAPLSHP NAME=VERIFY_COUNTRY ITEM_TYPE=XXAPLSHP "
in my workflow earlier I have defined a function by name "Verfiy Country " . now It has been deleted but when ever I am trying to move an attribute or save the workflow I am seeing this Dangling error message .
although my workflow is working fine .
how to resolve this issue ?
SkgHello,
Could you please post the actual error. I doubt very much it is "Workflow Ambiguos Error".
regards
Rick Bakker
hanabi technology -
How do you use user defined error messages in Value Help?
Hi,
I'm currently working on a Modifiable Value Help Selector in Web Dynpro Java, and I want to use a user defined error message when I validate the values entered by a user. Currently, it's returning its default error message ("Character <string> does not match...").
Since the project requires a different error message, is there a way to override the default error message and use my defined error message instead?
Thanks!Hi Angelo,
I am not sure why message area is showing both Custom and inbuilt messages but you can try the following:
i guess you must be using reportContextAttribute exception for showing Error messages on the input fields as well.in that case you can disable the message area so messages will appear only on the Context level ie; on input fields.
For other messages apart from validation messages you can enable the message area before reporting the exception.
make sure the boolean context variable which will be used for enabling and disabling the message area should have Readonly property set as true.
I am not sure whether this is the only solution for this but you can try and see if it works.
Siddharth -
Custom Workflow Load Error in Power Center error code 36331
Hi,
I have installed OBIEE version 11.1.6 and OBI APPS version 7.9.6.3. I am using informatica power center 9.0.1.
I have followed the following guide Oracle® Business Intelligence Applications Configuration Guide for Informatica PowerCenter Users
Version 9.0.1
When i run a load i am getting the error code 36331.
And the Workflow Log shows the below:
*ERROR 2/5/2013 5:30:58 PM node1 1423948096 LM_36320 Session task instance [C_SDE_ORA_EmployeeDimension]: Execution failed.*
The DAC log file is as follows
*3722 SEVERE Tue Feb 05 17:23:29 GMT 2013 Workflow C_SDE_ORA_EmployeeDimension failed with the following message :*
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
*3723 SEVERE Tue Feb 05 17:23:29 GMT 2013 pmcmd startworkflow -sv BIAIS -d node -u Administrator -p **** -f CUSTOM_SDE_ORAR1213_Adapter -paramfile /instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.CUSTOM_SDE_ORAR1213_Adapter.C_SDE_ORA_EmployeeDimension.txt C_SDE_ORA_EmployeeDimension*
Status Desc : Failed
WorkFlowMessage :
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
*3724 SEVERE Tue Feb 05 17:23:29 GMT 2013 Could not get statistics for sessions using command :pmcmd getsessionstatistics -sv BIAIS -d node -u Administrator -p **** -f CUSTOM_SDE_ORAR1213_Adapter -w C_SDE_ORA_EmployeeDimension SDE_ORA_EmployeeDimension*
*3725 SEVERE Tue Feb 05 17:23:29 GMT 2013*
ANOMALY INFO::: Error while executing : INFORMATICA TASK:CUSTOM_SDE_ORAR1213_Adapter:C_SDE_ORA_EmployeeDimension:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv BIAIS -d Instance -u Administrator -p *** -f CUSTOM_SDE_ORAR1213_Adapter -paramfile /instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.CUSTOM_SDE_ORAR1213_Adapter.C_SDE_ORA_EmployeeDimension.txt C_SDE_ORA_EmployeeDimension*
Status Desc : Failed
WorkFlowMessage :
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
I have checked all of the Mappings, Mapplets and Workflows as well as generating parameters for attempting the load, but it still errors. Does anyone have any ideas?
Many thanks for any help in advance.Was the Workflow or the DAC task been modified. Because the Out-of box customer dimension task would look like:
is Commands executed :
pmcmd startworkflow -sv OBID_REP -d Domain_xxx.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -lpf /u01/oracle/Informatica/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.SDE_ORAR1213_Adaptor.SDE_ORA_EmployeeDimension_Full.txt SDE_ORA_EmployeeDimension_Full
If a session in the workflow is renamed then the DAC Command's need to be modified to reflect the new name.
Was Execution Plan built before Starting it.
Let me know if this helped.
Regards,
Jay -
"Limits not Defined " error while saving IT0008 in sap hr
Hi Experts
While trying to Hiring an employee, infotype0008 showing Limits not defined error and not allowing to save the record. I checked table V_T510 and V_T510N. All the limits defined in right way. Please check and advice. I attached copy of screen shot for your reference.
Regards
Prakash BhaveHi Remi
Thanks for your reply. As per your reply I followed procedure and it allowed me to save Basic Pay Infotype (0008)
Thanks a ton.
Regards
Prakash Bhave -
Oracle 11g bug for column ambigously defined error
I have below format query running on Oracle 10g without any issues
select col1
from (select col1
from (select 'A' col1
from dual)
) v1
inner join (select col1 as col2
from (select 'A' col1
from dual)
) v2
on (v1.col1=v2.col2);
When I run the exact same query on Oracle 11g I get column ambiguously defined error. But when I change the query to as below it works fine on 11g
select v1.col1
from (select col1
from (select 'A' col1
from dual)
) v1
inner join (select col1 as col2
from (select 'A' col1
from dual)
) v2
on (v1.col1=v2.col2);
Is it because 11g ignores column alias in my inner queries.I'd tend to agree that this seems to be a bug in 11.1.0.7 (at least, that's the version I'm running it in)
It's not even that Oracle doesn't know about the column aliases, you can remove the aliases in the ON without a problem, i.e.
SELECT v1.col1
FROM
(SELECT col1 FROM
(SELECT 'A' col1 FROM dual
) v1
INNER JOIN
(SELECT col1 AS col2 FROM
(SELECT 'A' col1 FROM dual
) v2
ON (col1=col2);works fine. Using the old join syntax also seems to work fine
SELECT col1
FROM
(SELECT col1 FROM
(SELECT 'A' col1 FROM dual
) v1,
(SELECT col1 AS col2 FROM
(SELECT 'A' col1 FROM dual
) v2
WHERE (col1=col2);So it appears that something in the SQL 99 parser is broken. Have you logged a bug in Metalink?
Justin -
While executing BAPI_PO_CREATE1 by using Adaptive RFC Model in Webdynpro
I was facing the following Error
Field Selection PTFF not defined , error key : RFC_ERROR_SYSTEM_FAILURE
But while trying to create BAPI_SALEORDER_CREATE is working properly with the same configuration.
If anyone come accross this issue please help me outThis is beacuase of some issues in the parameters that are passed and is rectified.
krishna -
Is there a LabView example in the use of user defined error codes?
Specifically, I have a VI that tests four arrays of data against various high/low limits. I have pass/fail outputs for 18 tests. I'd like to combine these into an 'error out' cluster with appropriate error codes and messages, for which I've created an x-errors.txt file.
My first question must be trival - how do I just set the 'status' bit of the error stream to let the general error handler then look up the error desription from the file?
Secondly - I can't find an example of this in the technical resourses, amI missing something?
Thanks,
Mike
Mike Evans
TRW Conekt
N.I. Alliance Member, UK
http://www.Conekt.netThere is no example program. There is extensive help on how to do this. Here's the basics.
1) There are two ways to define user error codes in LV6.1. If you are using LV6.0 or earlier, only one method is possible.
2) The 6.0 method involves wiring arrays of error codes and arrays of error code strings to the General Error Handler.vi. These codes will be used to explain any error code which is undefined in LV's internal error code database. Error codes reserved for users which are guaranteed not to be used by NI are from 5000 to 9999.
3) The 6.1 method allows you to create a specially formatted error code file on disk that will be merged with the LV error code database each time LabVIEW launches. For help on this, go to LV's online help, and in t
he Index tab, type
"user-defined error codes, in text files"
(without the quote marks)
4) If you want to set an error into the error cluster, use the General Error Handler.vi again. Wire your error code value to the Error Code terminal (the leftmost-topmost corner terminal). Wire the name of your VI to the Error Source terminal, and wire "No Dialog" to the Type of Dialog terminal (left-side, near the bottom). The error code cluster that comes out of this VI will either be the error in (if one was set) or a new error code cluster with your error and the status bit set to TRUE.
5) The attached demo is written in LV6.0.
Attachments:
Error_Demo.vi 37 KB -
Missing Defines Error in Simple Java Stored Procedure
Anyone have any suggestions on what might be causing the unusual behavior described below? Could it be a 10g java configuration issue? I am really stuck so I'm open to just about anything. Thanks in advance.
I am writing a java stored procedure and am getting some SQLException's when executing some basic JDBC code from within the database. I reproduced the problem by writing a very simple java stored procedure which I have included below. The code executes just fine when executed outside of the database (10g). Here is the output from that execution:
java.class.path=C:\Program Files\jEdit42\jedit.jar
java.class.version=48.0
java.home=C:\j2sdk1.4.2_04\jre
java.vendor=Sun Microsystems Inc.
java.version=1.4.2_04
os.arch=x86
os.name=Windows XP
os.version=5.1
In getConnection
Executing outside of the DB
Driver Name = Oracle JDBC driver
Driver Version = 10.1.0.2.0
column count=1
column name=TEST
column type=1
TEST
When I execute it on the database by calling the stored procedure I get:
java.class.path=
java.class.version=46.0
java.home=/space/oracle/javavm/
java.vendor=Oracle Corporation
java.version=1.4.1
os.arch=sparc
os.name=Solaris
os.version=5.8
In getConnection
We are executing inside the database
Driver Name = Oracle JDBC driver
Driver Version = 10.1.0.2.0
column count=1
column name='TEST'
column type=1
MEssage: Missing defines
Error Code: 17021
SQL State: null
java.sql.SQLException: Missing defines
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:158)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.OracleResultSetImpl.getString(Native Method)
at OracleJSPTest.test(OracleJSPTest:70)
Here is the Java code:
// JDBC classes
import java.sql.*;
import java.util.*;
//Oracle Extensions to JDBC
import oracle.jdbc.*;
import oracle.jdbc.driver.OracleDriver;
public class OracleJSPTest {
private static void printProperties(){
System.out.println("java.class.path="+System.getProperty("java.class.path"));
System.out.println("java.class.version="+System.getProperty("java.class.version"));
System.out.println("java.home="+System.getProperty("java.home"));
System.out.println("java.vendor="+System.getProperty("java.vendor"));
System.out.println("java.version="+System.getProperty("java.version"));
System.out.println("os.arch="+System.getProperty("os.arch"));
System.out.println("os.name="+System.getProperty("os.name"));
System.out.println("os.version="+System.getProperty("os.version"));
private static Connection getConnection() throws SQLException {
System.out.println("In getConnection");
Connection connection = null;
// Get a Default Database Connection using Server Side JDBC Driver.
// Note : This class will be loaded on the Database Server and hence use a
// Server Side JDBC Driver to get default Connection to Database
if(System.getProperty("oracle.jserver.version") != null){
System.out.println("We are executing inside the database");
//connection = DriverManager.getConnection("jdbc:default:connection:");
connection = new OracleDriver().defaultConnection();
}else{
System.out.println("Executing outside of the DB");
DriverManager.registerDriver(new oracle.jdbc.OracleDriver());
connection = DriverManager.getConnection("jdbc:oracle:thin:@XXX.XXX.XXX.XX:XXXX:XXXX","username","password");
DatabaseMetaData dbmeta = connection.getMetaData();
System.out.println("Driver Name = "+ dbmeta.getDriverName());
System.out.println("Driver Version = "+ dbmeta.getDriverVersion());
return connection;
public static void main(String args[]){
test();
public static void test() {
printProperties();
Connection connection = null; // Database connection object
try {
connection = getConnection();
String sql = "select 'TEST' from dual";
Statement stmt = connection.createStatement();
ResultSet rs = stmt.executeQuery(sql);
ResultSetMetaData meta = rs.getMetaData();
System.out.println("column count="+meta.getColumnCount());
System.out.println("column name="+meta.getColumnName(1));
System.out.println("column type="+meta.getColumnType(1));
if(rs.next()){
System.out.println(rs.getString(1));
} catch (SQLException ex) { // Trap SQL Errors
System.out.println("MEssage: " + ex.getMessage());
System.out.println("Error Code: " + ex.getErrorCode());
System.out.println("SQL State: " + ex.getSQLState());
ex.printStackTrace();
} finally {
try{
if (connection != null || !connection.isClosed())
connection.close(); // Close the database connection
} catch(SQLException ex){
ex.printStackTrace();
Message was edited by:
jason_macJason,
Works for me on Oracle 10.1.0.3 running on Red Hat Enterprise Linux AS release 3 (Taroon).
Java code:
import java.sql.*;
* Oracle Java Virtual Machine (OJVM) test class.
public class OjvmTest {
public static void test() throws SQLException {
Connection conn = DriverManager.getConnection("jdbc:default:connection:");
PreparedStatement ps = null;
ResultSet rs = null;
try {
ps = conn.prepareStatement("select 'TEST' from SYS.DUAL");
rs = ps.executeQuery();
if (rs.next()) {
System.out.println(rs.getString(1));
finally {
if (rs != null) {
try {
rs.close();
catch (SQLException sqlEx) {
System.err.println("Error ignored. Failed to close result set.");
if (ps != null) {
try {
ps.close();
catch (SQLException sqlEx) {
System.err.println("Error ignored. Failed to close statement.");
}And my PL/SQL wrapper:
create or replace procedure P_J_TEST as language java
name 'OjvmTest.test()';And here is how I execute it in a SQL*Plus session:
set serveroutput on
exec dbms_java.set_output(2000)
exec p_j_testGood Luck,
Avi. -
Hi ,
I was getting the workflow mailer error from R12. I tried to start,but failed......after that I got a confirmation from my client that somebody changed a table, then I checked again and found Workflow mailer working fine....I didnt get what happened on this...
friends, If you have any idea on this, please sharePl post details of OS, database and EBS versions. Has this mailer worked before ? If so, what changes has been made recently ? Pl also see these MOS Docs
How to Troubleshoot 'Validation failed' Errors when Starting the Mailer (Doc ID 463354.1)
Unable To Start Workflow Notification Mailer (Doc ID 418329.1)
How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer Issues (Doc ID 753845.1)
Workflow Mailer Will Not Start Stays In Starting Status (Doc ID 837893.1)
Unable To Connect To The Mail Account. Check The Host, User Name And Password (Doc ID 1123684.1)
HTH
Srini -
Hello,
We have a custom workflow, z_workflow.
In this z_workflow, its calling a custom FM, z_fm.
In this z_fm, I'm updating a custom tbale, z_table.
Before writing UPDATE z_table, I am locking this z_table by using 'ENQUEUE_E_TABLE', as below,
Pls. note this workflow is triggering in BACK GROUND by WF-BATCH user
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = 'Z_TABLE'
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc = 0.
UPDATE z_table
SET matnr = ls_mara-matnr
descr = lv_text
WHERE ref_id = ref_id.
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = 'Z_TABLE'.
ELSE.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4. =====>
==> If the lock is failing an an ERROR / 'E' type message is occuring, but still the 'Rest of the code blocks' are executing normally (where in 2nd_z_table is updating), but the workflow is ending up in 'Error state' in SWI1 (workflow log) transaction, our users who are monitoring this workflow thinking that the transaction went bad, but again they noticed that the 2nd_z_table is updating as usual!!
ENDIF.
Rest of the code blocks ==> here another custom tbl, 2nd_z_table is updating
Our workflow expert said that, the error is occuring, well, but as its (z_fm) calling from / by back ground workflow user, hence the 'Rest of the code blocks' are triggering normally and the 2nd_z_table is updating as usual, but overall the workflow ends up in error state!
To avoide this confusing situation (workflow in error, but rest of the code blocks are executing normally), workflow expert suggested the below approach (raising of EXCEPTION in z_fm instead of ERROR message), pls. suggest me is it OK / safe / works good for me?
DO 10 TIMES. => Workflow expert asking me to add all these blue lines to my code
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = 'Z_TABLE'
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc = 0.
UPDATE z_table
SET matnr = ls_mara-matnr
descr = lv_text
WHERE ref_id = ref_id.
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = 'Z_TABLE'.
CLEAR lv_locking_failed_on_z_table.
EXIT.
ELSE.
WAIT UP TO 1 SECONDS.
lv_locking_failed_on_z_table = abap_true.
ENDIF.
ENDDO.
IF lv_locking_failed_on_z_table IS NOT INITIAL.
RAISE exception_lock_failed. ===> Does the Raising EXCEPTION is solve my problem? pls. suggest me
RETURN.
ENDIF.
workflow expert said with this raising of exception will not trigger 'Rest of the code blocks' so that user will be not confused
Thank youHi "3SAP"
Yes, your WF guy is correct - raising exception will stall the workflow and not execute to the second table update.
Moreover, second table update logic should be kept inside of the SY-SUBRC = 0 of locking on FIRST TABLE update.
In current case, I cannot say for sure that second table is getting updated in the same call because as soon as TYPE 'E' message is triggered in a background step, standard exception is triggered in the workflow runtime to stop execution - which will NOT execute the code after MESSAGE statement.
As mentioned by Mike, the second table may have been updated from another instance/session/etc but from not this one.
Regards,
Modak -
"static inline" in headers cause multiply-defined errors linking git
Hi,
I'm trying to build git 1.6.2 with Sun Studio 12 on Solaris 10 SPARC (64bit), but I'm getting a "multiply-defined" error from ld when it tries to link any objects defined as "static inline" in the header files:
git-compat-util.h
ld: fatal: symbol `$XAbC.skip_prefix' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbD.gitstrchrnul' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbE.xsize_t' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbF.has_extension' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbG.sane_case' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbH.strtoul_ui' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbI.strtol_i' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
strbuf.h
ld: fatal: symbol `$XAbJ.strbuf_swap' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbK.strbuf_avail' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbL.strbuf_setlen' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbM.strbuf_addch' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbN.strbuf_addstr' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbO.strbuf_addbuf' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
hash.h
ld: fatal: symbol `$XAbP.init_hash' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
cache.h:
ld: fatal: symbol `$XAbQ.copy_cache_entry' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbR.create_ce_flags' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbS.ce_namelen' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbT.create_ce_mode' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbU.ce_mode_from_stat' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbV.ce_to_dtype' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbW.remove_name_hash' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbX.object_type' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbY.is_null_sha1' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAbZ.hashcmp' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAcA.hashcpy' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAcB.hashclr' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAcC.is_absolute_path' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: symbol `$XAcD.hexval' is multiply-defined:
(file libgit.a(date.o) type=FUNC; file libgit.a(parse-options.o) type=FUNC);
ld: fatal: File processing errors. No output written to git-fast-import
What's causing this & how do I prevent it from occurring?
Thanks.
-JohnHi Fedor,
My CFLAGS are: -xc99 -g -xs -fast -fsimple=1 -fns=no -xtarget=ultraT1 -xarch=sparcvis2 -m64
-mt -xipo -xcode=pic32 -xpagesize=default -xlic_lib=sunperf
I had to add -D_XPG6 to get the compile to start at all because of the following error: #error "Compiler or options invalid for pre-UNIX 03 X/Open applications and pre-2001 POSIX applications"
My LDFLAGS are: -Wl,-ztext -Wl,-Bdirect -Wl,-zlazyload -Wl,-zcombreloc -Wl,-zignore
Thanks.
-John -
Page process: user defined error-message
hi to everyone!
i want to display a user-defined error-message, if for example a select in an anonymous PL/SQL block returns more than one row. i tried it with an user defined exception, but i get allways the success message... how can i do that?
thanks for your help.
bye,
christianHi,
In the exception handler of your PL/SQL process use this :-
apex_application.g_print_success_message := '<span style="color:red">Error message</span>';Regards
Paul -
Run-time error '1004' Application-Defined or object-defined error
Hello friends,
My requirement is to make the cells under Columns Actual, forecast and target (Dimesnion Category) Locked.
I've used various methods like GetOnlyRange but it didnt work.
Now, i've selected all the cells of the sheet, where user can input and made them unlocked. ( from Right-click>FormatCells>Protection tab-->Locked checkbox unchecked)
Then, go to "review" tab, click "Allow Users to edit Ranges",-> Protect Sheet---> ticked "Unlocked Cells"
Then go to WorkBook Options and set a password for the worksheet.
But on expand, I'm facing Run-time error '1004' Application-Defined or object-defined error.
Please help.
Please help.Hi,
I think that is VBA Runtime error, you can fix these errors by downloading in various sites.
http://www.articlesbase.com/data-recovery-articles/vba-runtime-error-1004-application-defined-or-object-defined-error-fix-these-errors--1339060.html
You can try with the above link. I hope this could solve your problem.
Regards,
B.S.RAGHU
Maybe you are looking for
-
IPhone 4S OS 5.0.1 - Music and YouTube pauses for no reason!
Hi, I am frustrated with a major issue with my iPhone 4S. Recently, when I listen to music on the iPhone it pauses repeateldy with no reason. It happens every 1-1.5 minute and on every track I tried in my library. This is not specific to HOW I am l
-
I try hard but do not managed, I can't get the variable situaded inside a step? I have created my sequence object then my step object (I can get the right name of this one) but I didn't find in the help the method allowing to get any value of the ste
-
Hi, I have CURRENT DAY variable and i want to create one more variable which gives the Date before 30 days. Is there any STD variable which gives the date before 30 days .Please tell me. I have created one variable with Customer exit processing type
-
Transport target and transport groups
hi all, i need to create,transport target and transport groups,wht is the use and how to create. redards, AVR
-
Hi All, I would like to inform to you all that I have newly created the tax code. When the user giving interface from the external system to SAP system thru background processing, it gives error. The document value is 120.12 (includes Tax) and the