Yellow box flashes and vanishes, and cannot use certain flash pages. at least 5-6 times a day a small yellow box appears with a warning sign but it vanishes less than a second later so I can't read it. I also cannot use certain pages that require Flash.

For about 2 months I have been having problems with pages that require Flash when using Safari, I also have a strange small yellow warning box that flashes on my screen, but I cannot read it before it vanishes. I think I may have a virus, what should I do?

I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Similar Messages

I installed a few themes on my firefox , when i open a blank page it is supposed to show a skin but the skin disapears in less than a second, What shall be done to have the skin remain on the blan page ?

I installed a few themes on my firefox , when i open a blank page it is supposed to show a skin but the skin disapears in less than a second, What shall be done to have the skin remain on the blan page ?

That's probably a bookmark you have saved in Favorites.
Tap bookmark icon>Favorites>Edit>Delete the bookmark

Warning screen pops up for less than a second then disappears

After I upgraded to Mountain Lion, occasionally a warning screen with the yellow '!' pops up for less than a second then goes away. What does trhis mean, does anyone else have this problem?

Never seen it - never heard of it. Does it popup while you're using any particular application? Is it like a dialog box? It could be some third-party application trying to warn you... about something.
Clinton

When I go to Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.

After the OS X Yosemite 10.10.3 update When I go to use Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I have downloaded and installed Adobe Flash Player, but it was installed to a "disk image". I don't know what this is and I cannot see anything that requires Flash Player. What am I doing wrong?

I have downloaded and installed Adobe Flash Player, but it was installed to a "disk image". I don't know what that is, but I cannot view anything that requires flash player. What am I doing wrong?

Thanks for your help, but that didn't do any good either. I have been double clicking from the download files, double clicking on the "install adobe flash player", closing the anti virus, closing Safari, watching the install progress and clicking finish. It indicates that "flash player" is installed, but every time I try to view something requiring flash player, it tells me I must download it. It shows up in the "system preference" and from there I can make some changes, but it still won't let me view anything requiring "flash player". It does not show up in my apps like Adobe Reader does. It shows up in the "downloaded files" section of "Finder". I'm getting really perplexed over my inability to get this right.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

Can't watch video and play games that require flash player

I'm using windows7 family premium version
internet explorer 10 last version 10.0.5
exploitation system 64 bytes
flash player verson 11..700.202 the latest one
So as i say can't watch video and play games that require flash player, they keep asking me to install flashplayer... i did everything i read in the forums, unistall it, clean the memory, reinstall it, disabe active x etc... but still have the problem.
More specific about my problem is that: let's say that i'm trying to look at you tutorial video under thi forum Re: How do I fix Windows permission problems with Flash Player? i'm just seeing a black screen. So I'm able to guess where is the play button so when i push on that place, i can hear the sound of that video. Second step guessing where is the enlarge button, and when the screen is enlarged, magic i can see and hear the video.... So you figure that it's impossible to use my computer like that and guess right all the time, so....
Second fact, it seems that bug happened after an update (windows or explorer) and i even talk with a microsott tech who was not able to resolve it... But if i'm undoning the update and go back to a prior image, i have no problems with flash player anymore... it' been moths that i'm delaying my updates cause i cannot find any solutions.... So Please please please, help me .... don't know what's the problem is and i'm not a pro, don't know what to do. (Excuse my english it's my second language)
Thank you

The first thing I'd try is updating your video driver.
Windows: how do I update the device driver for my video/display adapter?
If you still have problems and since you're using Windows 7 x64, please check to see if you have the following Windows update installed:
KB2670838 – Platform Update for Windows 7 x64
If so, please uninstall it and try Flash Player out again.

I just downloaded the trial of Photoshop. Every time I try to open it, it comes up with an error message and closes less than 5 seconds into being opened.

I just downloaded the trial of Photoshop. Every time I try to open it, it comes up with an error message and closes less than 5 seconds into being opened. Does anyone know how I can fix this? I tried rebooting my computer and reinstalling photoshop. Thank you!

i7 is quite fast. that's what i am on too. You may need to
It would be necessary that you have to use "Adobe Creative Suite Cleaner Tool". (see Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 )
The order varies depending on your individual needs:
1. Maybe you have to activate/deactivate, so please have a look there:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
2. Sometimes, we know in the meantime, the "opm.db file" is the culprit. In this case you should delete it.
3. Did you already try "uninstalling and re-installing"? Be careful with (de)installing aso. by (de)installing by your own resources. As much as I regret it and as strange as it may seem I fear it's a challenge for Adobe's Creative Cloud Cleaner Tool. Sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!)
I quote: Adobe Creative Suite Cleaner Tool helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3-CS6) applications. The tool removes installation records for prerelease installations of Creative Cloud or Creative Suite applications. It does not affect existing installations of previous versions of Creative Cloud or Creative Suite applications.
Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html and follow the prescribed sequence of operations
4. If necessary and for further questions click through http://helpx.adobe.com/contact.html or http://helpx.adobe.com/de/contact.html or
Det finns också ett svenskt språkiga chatt. http://helpx.adobe.com/se/contact.html and if "open" please use chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.

I have a HP laptop, when i try to do certain things that require flash player it tells me i need to install the latest version so when i try it says its already installed. i have tried all the trouble shooting suggestions and it stll isnt working. i have

i have a HP laptop, when i try to do certain things that require flash player it tells me i need to install the latest version so when i try it says its already installed. i have tried all the trouble shooting suggestions and it stll isnt working. I even checked the activex filtering and that doesn't seem to be the problem.

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

Measure time of an measurement and if measurement time is less than 90 second wait until 90 second and then proceed to next steps or stop.

Hi
I am trying to make a program
      During execute a measurement count the time.
      If measurement time is more than 90 second proceed to the next steps (or stop the measurement)
      If measurement time is less than 90 second, wait until 90 second and then proceed to next steps or stop
I appreciate deeply if some help me.

What sort of measurement are you talking about? What affects the time of your measurement? The very basic description you have is of a state machine and there are numerous examples of that
1. Actually I would like measure the time of "Alignment" function done by wafer test equipment name Prober ( the model is "UF3000" made by TOKYO SEIMITSU CO., LTD.
2.. Right now the "Alignment" function is started when a GPIB command is written as "N" and wait for resposne 70 in polling.
Please refer to the attachment for Alignement function if it help you.
In the attahement
For Alignment error delay we are using =600
Alignment counter =30000
align loop cnt = 30000
This is a program wriiten by another person and he is not availabe any more. What I am trying to do is
1. During execute a "Alignment " function count the time.
2. If  "Alignment " function time is more than 90 second proceed to the next steps
3. If "Alignment " function is less than 90 second, wait until 90 second and then proceed to next steps
Attachments:
Alignment function.xlsx ‏153 KB

"Hi,I need a help something wrong happen with my ITunes ,during to the download progress,after few seconds is report ; U can not download,err" in Using iPad • 0 bookmarks

"Hi,I need a help something wrong happen with my ITunes ,during to the download progress,after few seconds is report ; U can not download,err"
in Using iPad •

It's better to post the URL of the feed (as you have subsequently done) than the contents of the feed .
From the FeedValidator report the feed is basically OK for iTunes. There are several occasions where 'content:encoded' sections (following immediately on 'guid' tags) should be enclosed in
<description>...</description>
tags: however all this will be ignored by iTunes anyway and only applies to other readers. The 'potentially dangerous content' referred to by FeedValidator is within the 'content:encoded' tags and so isn't relevant to iTunes. They are referring to an inline css style, and I don't know whether this might cause a problem elsewhere.
You should really have a language tag, e.g.
<language>en-us</language>
(you have a dc:language tag but that's for a different system). This should be placed in the top section, before the first 'item' tag.
It's advisable to have an 'itunes:explicit' tag for each 'item' -
<itunes:explicit>yes IF CONTAINS ADULT MATERIAL, OTHERWISE no</itunes:explicit>
it's not compulsory if you have no adult material, but you must have a 'yes' if you do.
You can check your feed by subscribing in iTunes from the 'Advanced' menu - this has the same result as clicking the 'Subscribe' button on the Store page. If it works OK there you are ready to submit it.

I bought an LG phone and a $35 dollar plan card. Less than a week later it said I was out of time for texts. Apparently it only gave me minutes, not the plan I wanted. Is there any way I can get the plan without paying again?

I bought an LG phone and a $35 dollar plan card. Less than a week later it said I was out of time for texts. Apparently it only gave me minutes, not the plan I wanted. Is there any way I can get the plan without paying again?

So you bought a plan and used it all and want another one for free? I understand you thought it had more texts or whatnot but they won't do that since you already used the other plan.
That's like going to McDonalds and ordering a double cheeseburger, them giving you a double cheeseburger, you eating it and then realizing you wanted a double quarter pounder and expecting them to give it to you free.

I recently began using reminders in ical and downloaded the iPhone and iPad app. It works great. However, the reminders in ical on the COMPUTER is difficult to work with - thin long column on the right rather than in it's own screen. is there a reminders

I recently began using reminders in ical and downloaded the iPhone and iPad app. It works great. However, the reminders in ical on the COMPUTER is difficult to work with - thin long column on the right rather than in it's own screen. is there a reminders app for the COMPUTER that is more user friendly?

sgreenie,
If you are willing to wait, Apple - OS X Mountain Lion - Inspired by iPad. Made for the Mac explains that a "Reminders" application will be included in the next release of OS X.

Photoshop CC 2014 stops working after less than 30 second and shuts down

I have installed and uninstalled Photoshop CC 2014 three or four times via Creative Cloud and each time it stops working after less than thirty seconds and shuts down the program. I then installed a an older version of Photoshop CS5.1 from a CD and it works perfect. I also have Illustrator CC 2014 and Lightroom 5 installed from Creative Cloud and both work flawlessly. What can I do to get Photoshop CC 2014 working?

You have not provided any system information or crash logs, so we can't really know.
http://myleniumerrors.com/working-with-your-operating-systems-tools/
Mylenium

I have reached my 5 computer max and reset less than 12 months ago - I am getting an error to say I cannot delete the accounts until 9 September - is there anyway around this?

i have reached my 5 computer max and reset less than 12 months ago - I am getting an error to say I cannot delete the accounts until 9 September - is there anyway around this?

Have you had a Look Here...
Aurthorise / Deaurthorise About
http://support.apple.com/kb/HT1420

Yellow box flashes and vanishes, and cannot use certain flash pages. at least 5-6 times a day a small yellow box appears with a warning sign but it vanishes less than a second later so I can't read it. I also cannot use certain pages that require Flash.

Similar Messages

Maybe you are looking for