Yes/No fields, single line. Long question in seperate text field. How to avoid gap between lines?

I have made two single-choice fields side by side (Yes and No) on one single line. The question for the choices is long, so I wrote it in a separate text field placed above the Yes and No fields. If I use the Yes field for the question, the No field would end up too far to the right.
Question ....
[Single-choice text fields space]
[ ] Yes
[ ] No
Problem now is there's too much space under the question, since the automatic text fields in the Yes and No fields are still there, though "invisible"/not used. How can I have a long question on a single line and have the Yes and No fields on the next line without a big gap between the two lines? Is it possible to delete the automatic text field in the Yes and No fields?
Just realised that if one makes a single Yes field, and a single No field to the right, you are ("of course") able to mark both the fields, since they are not linked anymore as with two choices in one field. The point with the single choice fields is then lost; to be able to choose only either one. Yes or No.
[X] Yes [X] No

The Single Choice is designed such that you have a single label and multiple choices, but the user can only select a single choice (in your case Yes or No). If you like the choices to appear side by side you can deselect Stack Choices Vertically in the Field Properties widget. You should also set the Label to Above. See the attached image.
Jeff Canepa
Software Quality Engineer
Adobe Systems, Inc.
[email protected]

Similar Messages

The question of the blend effect, how to avoid this ?

HI,
Today,when i used the blend effcts to compose two footages,i found that there few areas are not combined perfect,such as the following pic.
i wanted to know how did this happened? Is this the blend effects bug? And how can i do to avoid to happened this again?
Thanks!

The thick clouds in the original background are affecting how the blend effect works.
Are you trying to achieve something like this?
The colors aren't quite right because I didn't take time to exactly match the blue hues in the highlights, midtones and shadows of the cloud image, but you get the general idea. If this is the kind of composite that you are trying to get, then keying and tinting the dragon in a separate sequence is how to do it. Then composite the dragon sequence over the cloud/sky image in another sequence and have a play with levels, blend modes, color correction or all 3.
Cheers,
Jeff

Update Yes/No field in access table through oracle procedure

Hi,
How to update Yes/No field in access table through oracle procedure. all other fields like AutoNumber, Text I can update it. Yes/No field how to update? Please, any one can help me?
Thanks and Regards,
Sudha.

Sudha Teki wrote:
select "fldPost" from tblPHd@ODBCLNKNot quite sure what you mean, but the way you select the column would indicate a case sensitive column name
Look at this example
SQL> create table t
2 ("this" varchar2(10))
3 /
Table created.
SQL> insert into t values ('hello')
2 /
1 row created.
SQL> select *
2    from t
3 /
this
hello
SQL> select this
2    from t
3 /
select this
ERROR at line 1:
ORA-00904: "THIS": invalid identifier
SQL> select "this"
2    from t
3 /
this
helloIs your column name also case sensitive?

Hi-In Script Editor how can we maintan gap between words in one line

Hi,
Can any body help on how to maintain gap between words in same line?
Thanks in advance

Hi,
is it a Hard-coded text or a variable text.
If its a constant & Hard coded text then u can directly maintain by using space bar.
if its a variable text just define a paragraph format with Tab positions as per ur requirement of space..
Hope it helps!!
Rgds,
Pavan

Is it possible to create a form with multiple form fields on a single line?

Is it possible to create a form with multiple form fields on a single line? I can't find anything in the documentation or a template that does this.
I am trying to create a "documents received" checklist with a check box on the left margin, a date-received field to the right of the check box and and a description of the document (Formatted Text) on the far right.
In the past I have entered the Fixed Text with a word processor, published it to a PDF file, then added the check box and date fields with the Acrobat Forms editor. I would prefer to use FormsCentral if it is possible.

We now support multiple fields on one line. This post provides a brief overview.
Give it a try and send us your feedback.
Sorry it took so long.
Randy

Concatenate 2 data fields and put values in single line

Hello,
I am pretty new to BI Publisher. I want to concatenate 2 data fields (Product and ProductType). These concatenated values then I want to put them on a single line.
eg.
the values should look like
ProductType1.Product1,ProductType2.Product2, ProductType3.Product3..........
Thanks.

The XML is
- <ServiceAgreement>
<AccountId>1-abcde</AccountId>
<AgreementNumber>1-685</AgreementNumber>
<AgreementStartDate>07/08/2010 13:46:18</AgreementStartDate>
<AgreementStatus>Awaiting</AgreementStatus>
<ContactFirstName />
<ITIStreetAddress />
<ITIStreetNumber />
- <ListOfOrderEntry-Orders>
- <OrderEntry-Orders>
<ITIMoneyToCollect />
<OrderDate>07/08/2010 13:46:53</OrderDate>
<OrderNumber2>1-685579</OrderNumber2>
<OrderStatus>Pending</OrderStatus>
<OrderType>Sales Order</OrderType>
- <ListOfOrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>Hollywood 18m</Product>
<ProductType />
<PromotionId>123456</PromotionId>
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName>Hollywood 18m</ProdPromName>
<Product>n TV</Product>
<ProductType>Root</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>HBO + nFilmHD</Product>
<ProductType />
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>HBO</Product>
<ProductType>Opcje dodatkowe</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>nFilmHD</Product>
<ProductType>Opcje dodatkowe</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>nbox HDTV</Product>
<ProductType>Dekoder</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>Cinemax</Product>
<ProductType>Opcje dodatkowe</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>Filmbox</Product>
<ProductType>Opcje dodatkowe</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>Upust za zakup 3-ego pakietu</Product>
<ProductType>Upusty</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>Pakiet Informacja i Rozrywka</Product>
<ProductType>Pakiety</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>Opłata aktywacyjna za nbox HDTV</Product>
<ProductType />
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>Pakiet Dzieci</Product>
<ProductType>Pakiety</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>Pakiet Sport i Motoryzacja</Product>
<ProductType>Pakiety</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
</ListOfOrderEntry-LineItems>
</OrderEntry-Orders>
</ListOfOrderEntry-Orders>
</ServiceAgreement>
</ListOfBipServiceAgreement>
As per the above XML I want to see
Pakiet Dzieci.Pakiety , Pakiet Sport i Motoryzac ja.Pakiety.....
Thanks

Adding Amount field in BSEG table and display it single line item?

hi experts,
       I am doing credit / debit form now my requirement is
                                           According to BELNR , GJAHR,BUKRS i want to find credit amount for this selection cretiria.
                     so i want to add all the lines of amount filed for a particular BELNR and display it as single line.
so i am getting data from print program like this
SELECTION-SCREEN BEGIN OF BLOCK b0 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP 2.
PARAMETERS: p_belnr LIKE bkpf-belnr OBLIGATORY,
            p_bukrs LIKE bkpf-bukrs OBLIGATORY,
            p_gjahr LIKE bkpf-gjahr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b0.
SELECT SINGLE *
               FROM bkpf
               INTO i_bkpf
               WHERE belnr = p_belnr
                     AND ( blart = 'DG' OR blart = 'ZG' )
                     AND bukrs = p_bukrs
                     AND gjahr = p_gjahr.
IF sy-subrc = 0.
    SELECT *
          FROM bseg
          INTO table it_bseg
          WHERE belnr = i_bkpf-belnr .
ENDIF.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname                 = 'Z_CREDIT_DEBIT'    " p_name
VARIANT                  = ' '
DIRECT_CALL              = ' '
    IMPORTING
      fm_name                  = v_form_name
EXCEPTIONS
NO_FORM                  = 1
NO_FUNCTION_MODULE       = 2
OTHERS                   = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION v_form_name
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    i_bkpf                     = i_bkpf
    i_bseg                     = i_bseg
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
so my I_BSEG containing all line items of particular BELNR . with the field SHKZG iam getting only credit line items .
now i want to do is add all credited amount and display like this in a table.
against ref# (BSEG-REBZG) ! details (BSEG-SGTXT)! amount
124569                                   10%discount                950.00(total amount ie sum of all lines amount for a BELNR)
                                                                                10.00(total tax amt ie sum of   all lines of tax amount for a BELNR)
                                                                                960.00

hi arun,
         i used collect in smartform my procedure is like this .
               i am getting data into i_BSEG because i declared like this in TABLES parameter
                  i created a loop .
                         in that i mentioned like I_BSEG into WA_BSEG.
                               then i created a program lines here i mentioned like this.
                                              COLLECT WA_BSEG INTO IT_BSEG.
           but because of BUZEI "Number of Line Item Within Accounting Document .it is not same it is varying for every credited time that means for every line of BELNR. thats why it is not adding it is just appending .
so pls tell me any other chance to find sum .
because i want to sum up all credted amount and display it in single line
ie first column REBZG "Number of the Invoice the Transaction Belongs to(against ref) i want to display once .
And Second column SGTXT "item text(details) for amount once and for tax amount once
And Third column Amount first line consists total amount & second line consists total for tax amount
regards,
satheesh.
[email protected]
any doubts chat me regarding this post.

Trouble with auto size text in a single line form field

Hi. I'm having an issue with filling out a form in Adobe Reader on my iPad. The text field is single line. The font is set to "auto" so that the line of text will not exceed a certain width. When filling out this form on my laptop using Adobe Reader, it works fine. As I type additional text, once the field is filled, it shrinks the text font size. On my iPad, however, it won't let me type any more text in the field once I reach the end. Does Adobe Reader for iPad not support the "auto" font size in form fields? And I did check that my version of Adobe Reader is up to date on my iPad, so I do have the latest version.
Thanks in advance for your help,
Ashley

Actually, nevermind. It must be something wrong with the file. I tried opening another file and auto resize worked perfectly on it. Weird though that it works on one file and not another.
Thanks!
Ashley

How to validate for non-english character on a single line text field

In a "Single Line Text" field we would like to allow the users to enter alpha numeric values only. We should show error when the user enter non-English values like
carácter
Vijayaragavan, MCTS

Hi,
According to your post, my understanding is that you wanted to validate for non-english character on a single line text field.
I recommend to use jQuery to attach regular expression validation. Please refer to:
Using #jQuery to attach regular expression validation to a #SharePoint list form field
In addition, for custom validations you can create your own Types. Refer to
this[^] for creating custom field type
More information:
SharePoint Custom Field - Regex Validator
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

My new version of Firefox (downloaded automatically) on my Mac displays long paragraphs in emails as a single line, so the end of the paragraph is off the screen. How can I make it automatically wrap to fit the screen?

Long paragraphs in incoming emails display as a single line, with the end of the paragraph running off the screen. I want to make it wrap automatically to fit the screen.

For the browser window, just drag it to the top left of the screen (click and hold on the top bar with the traffic lights to drag), then in the bottom right of the window you'll see a rectangle with diagonal hatching. Click and hold on that and drag the window to the size you want.
Clicking on the green dot at top left will expand the window to fit the screen, clicking it again will shrink it back to where it was (this doesn't work in Finder windows quite the same).
The menu bar size is set in the bowels of the OS, though there may be third-party applications which can alter it.
As it's size is relative to the screen resolution, you could try reducing the resolution in System Preferences > Displays to see if that would suit you better.

Reg. displaying the comparison BOM fields in a single line in CS14

Dear Experts,
My requirement is that whenever CS14 is executed for Primary BOM with Secondary BOM comparison, when the Differentiated/Summarized Comparison button is selected, the comparison BOM Fields should appear in a single line. Currently SAP standard displays in two lines. in first line, primary BOM and next line, Secondary BOM. This functionality must be changed. I found Customer Exit PCSD0004 to achieve this. But how to do? Can anyone share your experience?
Thanks
Ramesh Manoharan

Hi mroshaw76 ,
That should be eazzzzyy :)
<?for-each-group:/Parent;Product?>
<?Parent?> --- this will display the car
Colors of the <?Product?> : <?for-each@inlines:current-group()?><?value?><?end for-each?>
<?end for-each?>Note the element name are case-sensitive.

Single Line Text Control (H&J) Tip & Question

The attached image is tip for anyone that is looking to constrain InDesign to use the width of a text field (maintaining a single line, good for a variable data field), while allowing characters to smash if they exceed the amount that would normally cause a text frame overflow. Texts in Red; are the settings that are necessary for this functionality. There is a limittation that is outlined in the graphic; that "Glyph Scaling" with no more than a Min of 50% or a Max of 200% (Paragraph Panel > submenu > Justification) is available, which limits its' full potential.
While looking over this, if you have any thoughts on how to build on these settings to allow even more control, please do reply!
Thanks!

I do similar with business card layouts. Handy when the layout has already been decided, without adequate forethought, and the client recruits a Greek guy.
Imagine what we could do if they brought back Multiple Masters.

Single line plan, how to switch and question about what rep told me.

I just got a contract (9/3) and have the "more everything plan" - I called Verizon Cust. Care (9/4) to inquire about the single line plan, I was told by Matthew that the single line plan price is in addition to the 40.00 line surcharge, so it would be $100.00 per month. Is this information accurate, or is it only $60.00 per month (as the website states for the ) plus taxes and fees?

The single line plan is only $60/month. There is no $40 line surcharge. You must be on the Singe Line Plan, though, not the More Everything Plan.

Query - Get data from the same table and field two times on a single line

I have prepared a query showing the bill of material. At each line each component will be a new line and I want to have the description of the material at the top (the master material composed of the component ones) and also the description of the component materials on the same line. This means that I should be able to use MAKT table 2 times on a single line of the query. I have used the query tool with SQ01 and SQ02 tcodes. How can I get the the description of the material at the top and also the description of the component material on a single line?
Thanks in advance for the answers.

Yasar,
Any time you wish to use a table twice in an SQ01 query, you have to create an alias.
SQ02 > select the infoset, 'change' > go to Join definitions.
Select 'Alias' button. Create. Select your table name (such as MAKT) and define an alias, such as 'COMP_MAKT' for component descriptions.
Now you can insert the Alias table into your infoset just like it was a regular table, and use standard join method to join COMP_MAKT to your component material number.
Best regards,
DB49

How to print long raw text data in report output in single line?

Hi All,
I have a requirement where I need to print raw comma separated text data in the report output which end user will open in excel and can sort as required. I can not directly generate excel output.
Now there is huge set of data and each row from the report query should be get printed on single line, It should not get printed on the next line.
I tried to extending the report with 240 characters but still there are some text data which is getting printed on the next line.
Please share your view if someone has any solution on this issue.
Thanks in Advance.
Arun

Make the report even wider. By default a report layout can be 10 pages wide. If you need more, change the "Max. Horizontal Body Pages" property, and extend your layout too.
IMHO, I wouldn't even use Reports to create a csv file. Utl_file or an sqlplus script that spools to a file are better options I think.

Yes/No fields, single line. Long question in seperate text field. How to avoid gap between lines?

Similar Messages

Maybe you are looking for