Yosemite and minimum operating requirements from installers

After migrating from an iMac to a Macbook Pro, both running Yosemite, I am getting messages about the operating system not meeting minimum requirements from two different installers. One says I need 10.7, the other says 10.4. I am running 10.10. Both programs ran fine on the iMac before migrating to the MBP. What go lost in the move and how can I remedy? Also, why do he installers, from two different companies, not 'see' that I'm running 10.10? Thank you.

What are the apps? And what versions of them?

Similar Messages

How to capture the data within the given range of maximum and minimum values ? from csv files

My requirement,
1. Here, the user will provide the range like maximum and minimum values, based on this range, the VI should capture the data within the given range. ( from CSV file as attached )
2. Then VI should calcluate the average value for captured data and export it to excel.
This is my requirement can anyone help me on this.
Many thanks in advance
rc_cks
Attachments:
sample_short.csv ‏2439 KB

Hi,
Thanks for remnding me. I forgt to attach the VI,
Here I am attaching the VI, what I tried.
From attached CSV file, I have to find an average value for columns B,C,D,E,F,G,H,I and AJ, AK. ( data range will be defined by user ), focused only on these columns
Here, the scope is to calculate an average value for given data range by user as MAX and MIN data.
FYI: I tried manually for two instance i.e column H & I. As per H column one steady state values from 7500 to 10500 and similarly in I column 7875 to 10050. So, I gave these as a limit to capture and calculate the average value. But unfortunaltely, requirement has been modified as per below requirements.
More Info on requirement:
--> The user will define the range of data by giving some MAXIMUM and MINIMUM values(for above mentioned columns induvidually), then VI should capture that data range and it has to caculate the average value for that range of data. This is the task I have to complete.
--> I am stuck in creating a logic for data capturing for given range of MAX and MIN value from user,
Can anyone help me on this.
If my explanation is not clear, Please let me know.
Many thanks, help mw
rc
Attachments:
VI_rc.vi ‏25 KB
sample.zip ‏4166 KB

In Numbers, can I highlight/colour differently to show high and low level requirements from the Y Axis?

I have a line graph in Numbers 09, but would like to either fill the chart between two points on the Y axis which shows the upper and lower limits of a set of results. Is this possible? I don't seem to be able to select the two points I want and end up with the Grid lines being all the same colours when I select colour or the Chart fill is all or nothing!
Thanks
altv

Jerrold Green1
I have done it both ways, the way you have suggested, the drawing of two lines for Upper and Lower limits and a combination of the two. They are all working fine. As you say, with use, I'll find other things that can be done with it, certainly from an aesthetic point of view.
Many thanks
altv

What is the platform and minimum system requirement for Adobe LiveCycle Security Server?

You can learn more about this by going to this webpage
http://www.adobe.com/products/server/securityserver/systemreqs.html

hi,
i have installed Adobe LiveCycle Policy Server and Adobe Document Security Manager.i followed all the steps to integrate these two.but i have this feeling that the integration didn't go on well.how do i check if it is integrated or not?moreover,LiveCycle Policy Server has an interface where we can create policies.likewise,does Document Security Manager also have some sort of an interface where we can attach documents to polices or encrpyt policies,etc.thanks in advance.
praneeth

Name and Address operator's packge do not have any values

Hi All,
I am using the Name and Address operator, but I do not have/want the 3rd party vendor's connector/tool/data library to work with my OWB.
I developed the map and deployed that map into my target.
Package got generated of name NAME_ADDRESS
In this package the entry point is the MAIN function, in the main function taking one parameter p_env.
When I execute the Package from SQL*Plus I am getting the value of p_env, which is wrong, p_env can not be NULL/0 at any case.
All I want is, how to pass/populate the value into p_env parameter, there will be more than one value into that parameter, param_value varchar2(30)and param_name varchar2(4000).
But I know nothing about what are the values may be in , when I execute the package...
ALSO I AM ATTACHING SOME MORE DETAILS....
create or replace package
FUNCTION Main(p_env IN WB_RT_MAPAUDIT.WB_RT_NAME_VALUES) RETURN NUMBER IS
end package
In this main function, the p_env is getting Initialize, it calls the initialize
procedure, there directly getting count on this parameter.
my question is at what point of time these valiables get initialize and what
are the exact details for the followings
TYPE WB_RT_NAME_VALUE IS RECORD
param_name varchar2(30),
param_value varchar2(4000)
TYPE WB_RT_NAME_VALUES IS TABLE OF
WB_RT_NAME_VALUE
INDEX BY BINARY_INTEGER;
What are these two variables (param_name and param_value) implies in wb_rt_mapaudit package
ANY HELP GREATLY APPRECIATED
THANKS FOR YOUR TIME
Gladson
[email protected]

Gladson,
Page 8-73 of the Warehouse Builder user's guide explicitly highlights the following section:
Note: Taking advantage of the Name and Address operator requires separate licensing and additional installation steps. Refer to the Oracle9i Warehouse Builder Installation and Configuration Guide for more information.
The functionality that does the parsing and standardization is not part of Warehouse Builder, but part of the package that the software partner brings in. If you think about that, it actually makes sense. Would you expect Warehouse Builder to contain the code to perform this action for all countries across the globe, in all different languages and the like? The data vendors, who are the experts in the different areas, know this information.
So, if all you want to do, is parse and standardize an address, then yes, you may be better of going directly to a partner (having said that, you may get a discount if you are a Warehouse Builder customer, but that I do not know for sure).
However, what does Warehouse Builder add:
- Data object design (maybe your target tables don't exist) and deployment
- ETL design and code generation
- Process flow creation and deployment
- Execution management (automatic logging etc)
- Integration with Discoverer
- Metadata management, such as impact analysis, version management, multi language support...
- Much, much more.
Specific to name and address (or say data quality): if you include the name and address operator on a Warehouse Builder mapping, then you can plug in any partner library you want, and in case you find out that another partner delivers better results, then go with the other partner. At the end of the day, you abstracted the implementation from the design. That makes you much more flexible in your choice of a data vendor. Besides, you get impact analysis, lineage and lots of other metadata management features for free. On top of that, if you want to identify duplicates, perform householding and the like, then there is match and merge (which yes, is part of the tool and not a third-party implementation) in order to define the rules for matching and merging.
Again, if you don't need any of that, then perhaps you don't want the overhead of having all this and you go directly to a data vendor.
Hope this helps,
Mark.

My pc does not meet the minimum operating system requirements for the 6th gen nano. Is there anything I can do to make it work? This was sent to me from Apple after my previous Nano was recalled.

My pc does not meet the minimum operating system requirements for the 6th gen nano. Is there anything I can do to make it work on windows XP? This was sent to me from Apple after my previous Nano was recalled.

I think you've anwsered your own question. If it does'nt meet the minimum spec it won't work.

I just update my Mac operating system from Snow Leopard to Yosemite and now have to upgrade my Epson Printer WF3540 so that it will be able to scan. Will Adobe be compatible with these softwares?

I just update my Mac operating system from Snow Leopard to Yosemite and now have to upgrade my Epson Printer WF3540 so that it will be able to scan. Will Adobe be compatible with these softwares?

Hi spiritentrep,
What Adobe software are you referring to? Are you using Acrobat? You should have no problems running Acrobat XI on Yosemite, and as along as you have compatible scanner drivers for your Epson, you should be fine there as well.
Best,
Sara

I just downloaded Yosemite and all my iPhotos have disappeared! I tried importing them from the photo library but it said there wasn't enough space on my hard drive which is rubbish, because they were there before. How do I get them back to iPhoto?

I just downloaded Yosemite and all my iPhotos have disappeared! I tried importing them from the photo library but it said there wasn't enough space on my hard drive which is rubbish, because they were there before. How do I get them back to iPhoto?

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

I have Mac os x with 10.4.11 and i want to upgrade, what is the next operating software from a 10.4.11 for a g4

I have Mac os x with 10.4.11 and i want to upgrade, what is the next operating software from a 10.4.11 for a g4 and can it be done on a g4

If you have a processor of 867 MHz or faster and a minimum of 512 MB of RAM, you can run OS X Leopard, updated to 10.5.8.
That's as far as a G4 can go.
Check eBay for discs:
http://www.ebay.com/sch/i.html?_nkw=Mac+OS+X+10.5+Leopard+Retail&_sacat=0&_odkw= Mac+OS+X+10.5+Leopard+Full+Retail&_osacat=0
No Snow Leopard, 10.6x or Lion, 10.7x.
they won't run in a PPC Mac.

(Deployment) Minimum Software required for BUILD server and IIS WebServer

We have a simple .Net SDK application written using VB-2005 and the Crystal Reports XI (R2) DEVELOPER package.
The RPT files are posted on our BOE-XI (R2) server, and are called using the View-On-Demand method from the Page Server (similar to the SDK sample application). At some point in the future, our .Net applications may invoke some of the other SDK content types.
In our environment, the .NET web-applications are checked-in to Clear Case, and then sent to a stand-alone BUILD server to be compiled. The compiled .NET web-applications are then posted to a stand-alone IIS WebServer (not the IIS server that hosts BOE InfoView/CMC).
The BUILD server and IIS WebServer have to be as "stripped-down" as possible in order to go through our QAT and Impact Analysis process.
So far we have had success if we deploy the SDK-only install from the Crystal Reports XI (R2) DEVELOPER package, and the service packs, but it doesn't include all the SDK components for other BOE content types.
If we deploy the Client-only install from the BOE-XI (R2) package, and the service packs - it doesn't seem to include the CR-Viewer which we need. But it does includes a bunch of extra software (eg. UNIVERSE DESIGNER) on the desktop of the BUILD server and IIS WebServer that our QA guys don't like.
What are the Minimum Software required for BUILD server and IIS WebServer to support CR and BOE SDKs...?
Are there any install packages that contain JUST those components, and not all the extra software that is not needed to Build/Deploy in .NET...?
Thanks in advance for the advice.

Due to the CrystalDecisions.web.dll for the 2.0 framework being left off the BOE CD you will need to install the Crystal XI R2 runtimes as well as the BOE SDK.
To get the BOE SDK launch the Enterprise XI R2 installer and choose Server Install - not Client Install. Choose a Custom install. You'll be presented with a drop down list for the Enterprise components. Deselect everything and then look for the Developer Components option. You may have to drill down into one of the levels to find it. Under Developer Components you'll see the BusinessObjects Enterprise .NET SDK. Select it to install it.
Jason

I am receiving an error message "Error: 150:30" after having my computer serviced. Repair shop completely stripped down my machine and reloaded Operating system, Yosemite 10.10.1. tried to download a Licensing update, but can't get that to open.????

Adobe Photoshop CS4
I am receiving an error message "Error: 150:30" after having my computer serviced.
Repair shop completely stripped down my machine and reloaded Operating system, Yosemite 10.10.1.
I tried to download a Licensing update, but can't get that to open.????
My machine had originally been a clone of another Mac. Not it looks like a brand new computer.
Possibly there is something in system preferences to change? I turned off Firewall and allow downloads from all parties.
Thank You for you help!
joe

150:30 means the licensing failed. Photoshop can't be moved like other programs from another drive or from backup.
I would suggest a reinstall to fix it. Anytime you move Photoshop from from drive to another, it breaks licensing. A install is the quickest way. to fix it.
When you are done with the install, apply all CS4 updates. Product updates
Gene
(Remember to mark the answer that solved your issue by clicking on “correct”. This indicates the question is answered and credits those who took time to help you or followup if there are further questions)

I am thing of using Final Cut Pro but when I try and download I get the message "Your computer's video card does not meet the minimum system requirements." Can I do anything about this?

I am thing of using Final Cut Pro but when I try and download I get the message “Your computer’s video card does not meet the minimum system requirements.” Can I do anything about this? I am using a Mac Pro early 2008 with Yosemite 10.10.2. My current graphics card is a ATI Radeon HD 2600 XT 256 MB.

Geoff2T wrote:
I am thing of using Final Cut Pro but when I try and download I get the message “Your computer’s video card does not meet the minimum system requirements.” Can I do anything about this? I am using a Mac Pro early 2008 with Yosemite 10.10.2. My current graphics card is a ATI Radeon HD 2600 XT 256 MB.
It is just as the message says. Your video card is not compatible.
You can add a compatible graphics card and use FCP X with your mac. I can't suggest which one, but maybe other people on this forum can guide.
And you may also get good suggestions in the Mac Pro forum.

I have tried the following, "netsh winsock, reset", but I get a message that says the required operation requires elevation run as administrator . this is my laptop and I am an administrator, please help , itunes store is the only program i have issues

I get a message that says, the required operation requires elevation <run as administrator>. I am the owner of this laptop and I have administrative authority, why does this show and how can I fix this. Itunes store is the ONLY program I am having trouble with.Very , very frustrating.!!!!!!!!!!!!

I will assume you're using Windows Vista-7:
Try these steps instead:
1 Click start, and in the start menu search, type "cmd" (without the quotes) DO NOT PRESS ENTER!
2. Right click the "cmd" search result
3. Click "Run as Administrator"
4. If you get a pop up message, click yes or continue
5. Type the command in the window as you did above.
In an effort to try to prevent programs from messing with your computer, programs don't run under your administrator account unless you tell them to or they ask. This gives the Administrator (elevated) privelleges that you need.

Upgrade from SP2010 to 2013 [What is the minimum build required?]

Can SP2010 SP1 + June 2012 CU (14.0.6123.5000) be upgraded to SP2013? else, what is the minimum build required to move from SP2010 to SP2013?
Is there any Technet article which clarifies this?
Regards,
Harish Kumar

Actually the Build is not a problem because you will have to backup and restore SP 2010 backup on different machine and attach it to farm using powershell. you do not have a inplace upgrade option. you will have to go for database upgrade only
Check below article:
http://technet.microsoft.com/en-us/library/cc262483%28v=office.15%29.aspx
http://blogs.msdn.com/b/alimaz/archive/2012/07/17/upgrading-from-sharepoint-2010-to-sharepoint-2013-step-by-step.aspx

Minimum requirements from suppliers' side to participate in Bidding, Auctio

Hi,
I am Raghu, working on SRM5 implementation project. I need to know the minimum requirements from suppliers' side to participate in Catalog Management, Bidding & Live Auction in terms of IT knowledge & compatibility. For example, if a vendor wants to host his products over internet for catalog management scenario, then, apart from internet access does he require anything else?
Also, can anyone let me know ehether two part bidding (Priced & Unpriced as per Govt. Rules) is supported by SRM5? DO we have any add ons to achieve this functionality.
I would be gratefuk if someone can help me in this regard.
Regards
Raghu

Hi Raghu,
In addition to What Ramky has suggested, please find below few clarifications required by you:
In case of CCM -
One way is the Vendor will give all the details like item, description, Qty, price, UOM, image etc in the CSV format provided by you and you will upload that CSV into the system.
The other way is asking the vednor to make the website where all the product details are maintained as OCI (Open Catalog Interface) compliant.This is considered as external vendor catalog. You can integrate external vendor catalog to your SRM system.
Hope this makes you more clear.
Award points for helpful answers.
Rgds,
Teja

Yosemite and minimum operating requirements from installers

Similar Messages

Maybe you are looking for