I have tried the following, "netsh winsock, reset", but I get a message that says the required operation requires elevation run as administrator . this is my laptop and I am an administrator, please help , itunes store is the only program i have issues
I get a message that says, the required operation requires elevation <run as administrator>. I am the owner of this laptop and I have administrative authority, why does this show and how can I fix this. Itunes store is the ONLY program I am having trouble with.Very , very frustrating.!!!!!!!!!!!!
I will assume you're using Windows Vista-7:
Try these steps instead:
1 Click start, and in the start menu search, type "cmd" (without the quotes) DO NOT PRESS ENTER!
2. Right click the "cmd" search result
3. Click "Run as Administrator"
4. If you get a pop up message, click yes or continue
5. Type the command in the window as you did above.
In an effort to try to prevent programs from messing with your computer, programs don't run under your administrator account unless you tell them to or they ask. This gives the Administrator (elevated) privelleges that you need.
Similar Messages
-
I am trying to restore my Iphone but get a message that reads "The Iphone "Iphone" could not be restored. The device cannot be found.
Can anyone help?
Thank you.That screen indicates that you need to connect the iPhone to your computer with the USB cable and restore from iTunes
Allan -
I exported my iBook and got the .ibooks file on my Desktop(iMac Retina 5K), I tried to put the file into the iBooks application but I get a message that says "The file "______.ibooks" couldn't opened because it isn't in the correct format. I took the same file and transferred it in my MacBook Air and was able to put it in the iBooks application no problem, the MacBook Air runs OS X v 10.9.5
Please advise as to Why it would work on an older OS X version as oppose to the newer OS X Yosemite
Thanks
JPThanks Lyra,
I may be doing something wrong because looking at the "Purchased" in iBooks I only see all the books that I actually purchased, none of the iBooks that I created in iBooks Author shows up. I can re-download all the iBooks I've purchased and some in iCouds, but the ones I've created in iBooks Author are no where to be found.
Any help is much appreciated,
Best Regards,
JP -
I have all my music on my ipad and icloud. I don't have itunes installed on a PC or MAC. I recently purchased Music Match, but all my non itunes music is on my ipad. When i turn on music match in the settings screen on my ipad i get a message that says all my music will be erased. How do I get music match to match what is there rather than erase it?
Killerfinch wrote:
My new yahoo account nestles comfortably in iCloud on the mine iPad.
No, your Yahoo account is not in iCloud (which only handles iCloud mail), it is in Yahoo, and the Yahoo mail account is on your iPad.
But the MacBook Pro will have none of it! I write this question now as I fear that I will be totally demented very soon and unable to formulate my thoughts clearly!
Get the correct settings for your account from Yahoo and set it up manually.
By the way, I also find the "password" issue problematical. It seems Apple want my Apple password rather than my eMail password. All very confusing.
That would depend on what you are trying to do. -
im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
How do I upgrade the iOs on my ipad1 to version5? I've tried through itunes many times, but I get a message that says that the download was interrupted and i should try again later. Can i download the iOS file to my PC and transfer it to the ipad? How should I do that?
Thank you!
Disabling firewall and AV did the trick!
Kudos.
Alex -
Can't open mail and app store. I've tried to reinstall Maveriks using recovery but I get a message that I can install using my apple ID. Any help??
Disable your antivirus and firewall, and try again.
-
How do I sync a movie downloaded to iTunes, but I get a message that says "Cannot sync movie to iPod because this computer is not authorized"? How do I fix this?
And I assume you have already checked to see if your iTunes purchases are authorized by choosing Store -> Authorize This Computer?
Some have been able to resolve this issue by removing the downloaded purchase and redownloading it again at no cost via iCloud. See this article for more information on redownloading past purchases.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
B-rock -
I have reinstalled i-tunes after getting error messsages when I downloaded the new software. Nor I get a message that says" Serice (Apple Mobile Device) failed to start. Verify that you have sufficient priveledges to start system services. What do I do now
Hi annibu757,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
I can not get iTunes Store on line. I keep getting a message that says I am not connected to the internet, but I know I am. I have to connect from three locations with the same results. Any suggestions?
Hello bigblue8
Check out the following articles for troubleshooting access to the iTunes Store. The first one will probably get you started enough to get it taken care of. If it does not the follow up article should definitely solve it for you.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
when trying to download ipod reset utility for windows i get a message that the installer is intended for 32-bit version of windows. what can i do?
I assume you have tried everything here?
iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
It doesn't mention 1442, but the same troubleshooting applies.
It wouldn't hurt to also try another available USB port on your machine and another sync cable if possible.
Lastly, try restoring the iPod on another PC or Mac running iTunes.
If you know of somebody with a PC running Windows XP still, ask them if you can download the reset utility and use it to reset the Shuffle.
B-rock -
Hi,
Ive moved my iphoto library to an external drive and it seems to be working fine launches from the external drive etc,
I then updated iphoto to iphoto 11 and then attempted to update to the current version either 9.3 or 9.4 i dont recall - whatever the updated version is.
I get a message that tells me that it cannot update because "file is not in original location"
Im not sure which file or which location is being referred to here.
im sure ive done something but cant seem to recall what that might have been...
im a little puzzled though since it still launches etc.
any help would be appreciated. (2007 imac)
thx"file is not in original location"
Is that the exact error message? When do you get this error? will your iPhoto library work properly withou the update?
LN -
O wn 2 iPod nanos series 4 and series 6 I want to sync different music on each iPod but I get the message when trying to sync the series 4 that there is too much data for the sync to take place. It seems both iPods have the same name, so I guess I have to rename one, how do I do this?
Or is there another solution
Any help appreiated
Wighill 13It would be useful to you if they had a different name, but the computer knows they are different. Create separate sync playlists for each device and go to the Music tab when it is connected and specify which playlist should be used for the sync.
-
I have a site that requires authentication. In the past i have logged in using firefox with the following format
http://username:password@sitename:siteport/specificsiteurlinfo
and gotten in just fine. I just set up a new computer with a new instance of firefox and try the same thing but I now get the following popup-
"You are about to log in to the site "sitename" with the username "username", but the website does not require authentication. This may be an attempt to trick you.
Is "sitename" the site you want to visit?"
When I click "yes" Firefox appears to try to go to the site without any authentication and I of course get a 403 Forbidden error.
I have tried reverting back to old versions of Firefox with no luck.
Any advice would be greatly appreciated.
Thank you.The purpose of that warning is to alert you to the possibility of being fooled by a link with login credentials at the beginning. On your old computer you might have tweaked this setting to limit when the warning appears:
http://kb.mozillazine.org/Network.http.phishy-userpass-length
This article discusses the steps to adjust that setting to fit your needs: [http://fix.lazyjeff.com/2011/04/disable-firefox-login-prompt.html]. -
HT1212 when trying to restore my ipad mini i keep getting a message that says network has timed out
When trying to restor my I pad mini that has been disabled I keep getting a message saying connection has timed out. I have been working on this for hours. Someone please tell me in the simplest terms how to restore my ipad.
Try temporarily disabling your firewall and anti virus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/
Maybe you are looking for
-
Session variables is not getting updated in JSP
Hi Floks, I had a situation where in i need to populate the drop down depending on the action perfomed by user in menus. An action method is triggered to load the scneario specific values to drop down here is that PSSBuilder pssbuilder = new PSSBu
-
Error creating Spatial Index - ORA-29855
I have a DB in 11g that I used SQL Developer to copy to my local machine, 10g installation. I copied the same kind of databases around a lot but this is the first time I'm getting this error, when creating the spatial index. For this table I only cop
-
Using PS to edit in LR screws up color balance?
I'm sure I'm missing something obvious here, but I can't imagine what it might be. I start with an image as a .NEF file (Nikon Raw format). If I import the image into Lightroom (3.4) and export it as JPEG without changing anything, it looks fine: If
-
Using Business Partner versus Customer/Vendor master
What could be the business scenarios in ERP2005, when Business Partner (BP) functionality should be used rather (or addition) than older Customer/Vendor master? I know that in CRM the BP is mandatory, but still CRM can interact with ERP's customer ma
-
Questions 'bout setting up auth. for 4 domains: 2 SecurID, 2 PDC
We have setup a portal with 4 domains. We are currently using one gateway. 2 domains are configured for securID authentication. We'd like to setup the other two domains for authentication using browser certificates. If possible followed by LDAP auth.