You are using an unsupported browser
Hi all
I'm using JDeveloper 11
When my application run on IE6 , the following messesage is shown:
"You are using an unsupported browser. The supported browsers are IE7 and higher, Firefox 2.0.0.2 and higher, and Safari 3.1.2 and higher."
How do I do the message don't show on IE6?
thank you
Thiensu2810
make firefox as your default browser.
In the tools - preferences window, set browser command line as "C:\Program Files\Mozilla Firefox\firefox.exe" or whatever the browser you want.
If you leave this empty, it takes system default browser.
Edited by: puthanampatti on Jul 12, 2009 9:17 PM
Similar Messages
-
when ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?
Step by step, how did you arrive at seeing this agreement?
-
"You are using a browser (SAFARI 4.0.4) that is no longer supported"
I have a iMac (20-inch, Early 2009). I am currently running Yosemite OS X 10.10.2, and my Safari is the Version 8.0.4 (10600.4.10.7). My question is this, when I log into various secure accounts I get the following message "You are using a browser (SAFARI 4.0.4) that is no longer supported by its vendor. Beginning in October 2014, PenFed will no longer support this browser version. You are strongly encouraged to update your browser to ensure your data is protected while using the Internet."
Since the Lion release. all my updates have been on line through apple. Any thoughts and advice?
Thanks
<Re-Titled By Host>Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
JavaScript required. The browser that you are using does not support JavaSc
I keep on getting this message when I'm trying to log on to Hotmail
JavaScript required. The browser that you are using does not support JavaScript, or you may have disabled JavaScript
And my browser (IE 6) cannot go to any java links. They either don't load or they are blank pages. I tried installing java, enabling them on the internet options, and even installed a new browser it is still the same thing!!!
I'm very pissed right now but I really really need some help. Sorry for the inconvenience.
Thank you, ZaragonJavaScript is different from Java. Somehow, security has gotten turn on in IE. If you go to tools, internet options, security, then look at Internet (for hotmail anyway), hit the custom level button, you will see that scripting has been disabled.
-
Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser. Then I get this message...
Instrument Library Invalid
GarageBand Ecpects a valid instrument foledr in /Libraty/Application Support/GarageBand
Please choose a valid instrument Library folder or quit and re-install GB
Any solutions?Is this a new installation of GarageBand or has it worked before on the same computer?
Or have you transferrred your GarageBand from a different computer?
The error message is saying, that your GarageBand installation is incomplete. There are essential foldrs missing in your system library.
Check, if indeed both folders are missing or if only the permissions are set incorrectly.
Your system library (the folder "System" directly on your system drive) should have the following folders inside the folder "Audio", and they need to be readable by the system and by administrators.
And in the folder /Library/Application Support there should be the Instrument Library.
If these folders do not exist (or no longer exist), restore them from your backup- If your GarageBand version is a new installation, the application may not hve been downloaded or installed completely, then reinstall GarageBand.
What is your GarageBAnd version, and how did you install it originally?
Regards
Léonie -
When I tried to join Google Plus I get the message Browser no longer supported. First Happened when using firefox 6.0.2 and still happens now with FF 7.
Also Gmail shows "You are using an old version of Firefox which Gmail no longer supports. Some features may not work correctly"
and at the bottom of this page the "educated guess" about my browser shows 3.0.15Your about:config has been modified with the lines
general.useragent.extra.microsoftdotnet
( .NET CLR 3.5.30729)
general.useragent.override
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.15; .NET CLR 2.0.50727; ffco7) Gecko/2009101601 Firefox/3.0.15 …
That is why Google is reporting old version.
You need to ether find out why or create a new profiles and see if this line is gone. [[Profiles]]
There is some verbose about MS, but I don't know of any MS add-on that would do this. -
What to do with message: You are running an unsupported version of Microsoft Windows.(Windows8.1)
I got this message when I run the program DETEKT. You are running an unsupported version of Microsoft Windows.
On my new Asus N550JV with pre-installed Windos8, I have many times a fall-out of the Network connection with WIFI since I used Windows 8 and after upgrade to Windos 8.1 Did not solve this problem.
What to do now??Hi,
Based on the description, you get message "You are running an unsupported version of Microsoft Windows.(Windows8.1)" when you use the DETEKT tool to detect Windows Server version.
For this issue, I recommend you ask in the Windows forum which is staffed by more experts specializing in this kind of problems. You can get better help there.
If you have problems about Exchange server, please feel free to post here for analysis.
http://social.technet.microsoft.com/Forums/en-US/home?category=windowsserver
Thanks for understanding.
Best regards,
Belinda Ma
TechNet Community Support -
Criteria or check when we see the error "You are using an older version of firefox"
Criteria or check when we see the error "You are using an older version of firefox that is no longer supported and may be insecure" on sites like facebook. Currently firefox 8.0 does not give this error but 3.5.4 does. What is the check performed by sites for this error?
Most web sites use the User Agent, which is sent in the header of the request for delivering the page. The user agent of the browser you used to post here is <br />
Mozilla/5.0 (Windows NT 5.1; rv:18.0) Gecko/20100101 Firefox/18.0 -
When I opened Gmail in my Firefox browser, I got a message I've never seen, before: "You are using an old version of Firefox which Gmail no longer supports. Some features may not work correctly. Upgrade to new version." I clicked on upgrade to a new version and was taken to the Mozilla site, where I downloaded the latest version of Firefox... then, when I restarted my computer, Gmail still gives me the same message!! What's going on?
Firefox 4 and later require at least OS X 10.5 and a Mac with an Intel processor.
*http://www.mozilla.org/firefox/12.0/system-requirements/
For an unofficial Firefox ESR 10.0.4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
*http://www.floodgap.com/software/tenfourfox/
*http://www.macupdate.com/app/mac/37761/tenfourfox
Be aware that TenFourFox doesn't support plugins.
*http://code.google.com/p/tenfourfox/wiki/ReleaseNotes1004
*http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
*http://code.google.com/p/tenfourfox/wiki/AAATheFAQ -
I have a SharePoint site which I am trying to open in SPD 2010, I am getting the following error(some of my team members are able to open)
The version of SharePoint foundation running on the server is more recent than the version of SPD you are using, you need a more recent version of SPD.
These are the ways I tried
1) Earlier I have MS office 32 bit and SPD 32 bit, I uninstalled them and installed both 64 bit versions
2) I uninstalled restarted my machine and installed it again still no use.
3) I installed SPD 2010 Service Pack 2 of 64 bit
4) I uninstalled the SPD 2010 and opened the site—site actions—edit page in SPD , then it asked me to install SPD 2010, then I installed and tried to open the same site, again same error.
How to solve this issue?
I checked permissions also at that site level – I have full control like others. I don’t have access to Central Admin so where else I can check the permission settings?Please update us SharePoint version
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful. -
I spend quite a few months each year in Canada where I use a Telus Cellular Hub device which is also my WiFi Router. My iPhone 5 has Cellular Data set to "Off" which insures I won't be charged via my Verizon Wireless Service Provider for charges while in Canada. Trouble is Telus, Rogers and all the Canadian Internet Providers charge for all Data going through their Systems. Again, My Cellular Data on the iPhone 5 is turned off, but I use WiFi for such things as checking the Weather, or FaceBook, or searching the Web.
I believe that things may be happening in the background from various Apps that use quite a lot of Data. It could be that iCloud is part of the issue with things being backed up automatically. It also could be that Apps like AP or other News Apps are sending large amounts of Data in the photos associated with their New Stories, etc. I typically turn off the App Store "Updates" such that they don't automatically load. The FaceBook works now posted videos play when you are just scrolling through the News Feed.
I have been trying to fine an article somewhere which focuses on this specific problem but unfortunately many if not most articles are about folks worried about using Cellular Data while in a WiFi environment when their Cellular Data is turned on.
Does anyone know of a fairly comprehensive article about what settings on which Apps might reduce the Data Usage when Cellular Data is turned "Off" but you are going through a Service Provider who charges for all Data Accessed even when you are using WiFi?Thanks for your comments, it is clear you understand my plight. The trouble is fully understanding what Apps and App Features are transferring data in the background any time you happen to turn WiFi to on (even if you have had it off most of the day or night). Obviously things like Location Services can constantly be sending and receiving data from my iPhone without any action on my part. Also if you have things like photo backup on the iCloud then each time you take a photo you are sending a copy out. All App Updates if set to Automatic also can add up to quite a bit of Data. Reading the News on AP or scrolling through FB News Feed is actually adding up to a lot of Data. There could be other culprits that I am not even thinking of. I don't want to turn Apps like Find My Phone off or turn iCloud off due to loosing the value of such a program entirely. Again thanks for your quick response.
-
Can you unplug the external hard drive you are using for time machine
can you unplug the external hard drive you are using for time machine and then plug it back in and it work normals because i have a mac book and don't want to always be carrieing the external hard drive every where i go so can you ?
Yes, that will work fine. It will back up normally once you plug it in again. I do this with my MacBook.
-
The version of GroupWise you are using cannot access this post office
I built a new Server and added it to my PCSD Tree. The new server name is
GroupWise and has an IP Address of 10.10.0.13.
I followed the GroupWise 7 Installation Guide and installed GroupWise to
this server. At no point did I find any place to enter the GroupWise
License.
During the install I discovered that 4 of my long time employees were not
able to be assigned to this new GroupWise server. It appears that a one
time (Long time ago) these 4 employees were part of an old GroupWise Mail
server that must have been removed. I can not find any reference to this
old GroupWise server. My thought is to delete the accounts for there 4
users and recreate the accounts.
However the larger problem is this: I can not login to the GroupWise
Server. Below are two screen shots of what I’m getting when I
launch the GroupWise 7 Client. When I look at the .NLM loaded on the
Server for GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
On the Client, when I launch GroupWise, The Novell GroupWise Startup has a
message in the message window “The version of GroupWise you are
using cannot access this post office”. Then after clicking OK three
times, the following message appears on the screen “GroupWise did
not initialize successfully, Please run GroupWise Setup, or contact your
system administrator. Unspecified error OLE Error 80004005*During the install I discovered that 4 of my long time employees were not
able to be assigned to this new GroupWise server. It appears that a one
time (Long time ago) these 4 employees were part of an old GroupWise Mail
server that must have been removed. I can not find any reference to this
old GroupWise server. My thought is to delete the accounts for there 4
users and recreate the accounts.
**You need to disassociate these four NDS users from any GW attributes.
Right-click each user in C1, GroupWise Utilities->GW / eDirectory
Association->Disassociate GroupWise Attributes.
*** When I do as instructed I get the following error:
[username] is missing the following attribute: NGW: Post Office
~~~~~~~~~~~~~~~~~~~~~~~~
*GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
**If the post office is closed, you need to determine why this is. On the
MTA, hit F10, Configuration Status, highlight your PO and hit enter,
select details, then look at the last closure reason.
*** Last Closure Reason= Missing or incomplete address information
[ When I installed GroupWise, I wanted all the e-mail to be stored on the
EMAIL Volume. During the install, I Changed the Install Directory to
\Groupwiseemail. After the install I have two directories in this volume.
One called DOMAIN and the other called PCAM (PCAM is name of my domain).
~~~~~~~~~~~~~~~~~~~~~~~~
*On the Client, when I launch GroupWise, The Novell GroupWise Startup has
a message in the message window 'The version of GroupWise you are
using cannot access this post office'.
**What version of GroupWise is on the server and what version client are
you
using? Also, if you pull up the properties of both the domain and post
office in C1 what is the database version listed as?
*** I installed GroupWise 7 both Server and Client. I'm thinking this is
due to the Post Office being closed. I only have 1 Post Office.
Thank You;
Lewis -
How do you see what version of PDK you are using?
how do you see what version of PDK you are using?
I'd like to know where I can look to see the full version number and understand what version I am on.The Release Notes document (pdk.release.notes.html) contains the version information.
Tugdual Grall has a great blog on additional ways of specifying your PDK/OC4J versions.
Peter -
Suppose you are using wifi. For example, I use my dads wifi, can he see what I am doing on my iPod when I use the Internet/wifi?
Yes it is possible if he has installed the appropriate monitoring software.
Maybe you are looking for
-
How can I make my Mac Book Pro print to a Panasonic KX-MB772?
How can I make my Mac Book Pro OSX 6.8 talk to a Panasonic KX-MB772 printer?
-
How do I set up a booklet to print with my Konica Minolta?
how do I set up a booklet to print with my Konica Minolta?
-
Why is my iphone sending messages from my email and not my number?
My phone will send messages from my email rather than my number. I have gone to the settings to switch it to send just from my number. When i do that, it does not send. What do i do to fix this problem!?
-
Using a date field to remove 'duplicates'
Hi all, Really struggling here, would appreciate some fresh ideas !! I have a ton of rows in a table that are duplicates with the exception of a date field that differs very slightly. e.g. TO_CHAR(START_DATE,' 13-JUN-2007 12:39:03 13-JUN-2007 12:39:1
-
HT204370 Watching purchased iTunes movies from iPad on iMac?
I purchased a movie through iTunes on my iPad (4th generation). Can I watch the movie on my iMac (OS X 10.9.4) too? If so How?