Your suggestion is very much required

Hello everyone,
I am facing a problem with configuring the release strategy.......and here goes the scenario...........
Under a company there are two projects that are being carried out....lets say A & B.
They want a release strategy for PR,PO,Contract and services.
They want different release strategies for 2 projects.
how do we go about this?

Similar Messages

My ipad suddenly not connecting to wifi internet but you can see the internet icon at the upper left side which means its connected.some of the apps are slowly connecting most of it are not,your suggestion/help are much appreciated,thank you.

My ipad suddenly cannot connect to wifi internet,you can see the icon that its connected but most of the apps are not opening with message not connected to internet...
Please your suggestions / help are very much appreciated
Thanks

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.

YOUR HELP IS VERY MUCH APPRECIATED... IM DEAD UHHH

I have a flash file but the problem is the scripts are object-oriented or (entered in some frames)
My professor prohibit that kind of method and I should create an AS file(package or class for those)... to be able to execute.
Meaning it could be in seperated AS files in one folder and frame codes must be clean.
Im a bit confused putting these codes in a package. I just copied these from net and as I try to pack them, the flash file is not workin.
Can someone help me pls regarding this. this is just easy for you coz Im just a newbie . I am willing to send you my FLA and AS files and check them..

PLSS GUYS MAKE THIS IN A PACKAGE:
var sfx_gun:Sound = new sfx();
var sp:MovieClip = new ship();
var tm:Timer = new Timer(700);
//var em:Sprite = new enemy();
var hp:Sprite = new hpbar();
tm.addEventListener(TimerEvent.TIMER, onstart);
var bulletholder:Sprite = new Sprite();
var healthbar:HealthBar = new HealthBar(10,10); //create the healthbar
addChild(healthbar); //add it to the stage
addChild(bulletholder);
addChild(sp);
//addChild(em);
addEventListener(Event.ENTER_FRAME,onenter);
addEventListener(MouseEvent.CLICK,onclick);
//stage.addEventListener(KeyboardEvent.KEY_UP, onKeyboardDown);
//stage.addEventListener(Event.EXIT_FRAME,onexit);
tm.start();
    function onstart(e:Event){
    var em:Sprite = new enemy();
    em.x= Math.random()*750;
    addChild(em);
//if (this.hitTestObject(MovieClip(root).sp)){
//MovieClip(root).hpbar.nextFrame();
function onenter(e:Event):void {
    sp.x-=(sp.x-mouseX)*.1;
    sp.y-=(sp.y-540)*.2;
//if (em.hitTestObject(MovieClip(root).sp)){
// MovieClip(root).hp.subtractHealth(20);
//    if (em.hitTestObject(MovieClip(parent).sp)){
//        MovieClip(parent).healthBar.nextFrame();
//function onenter(e:Event):void {
//    sp.x=260;
//    sp.y=260;
//    sp.rotation=0;
//function onKeyboardDown(event:KeyboardEvent):void
//            if (event.keyCode == Keyboard.LEFT)
//                if (sp.x > sp.width/2)
//                    sp.x -= 19;
//            else if (event.keyCode == Keyboard.RIGHT)
//                if (sp.x < (stage.stageWidth - sp.width/2))
//                    sp.x += 19;
//function onKeyboardDown(event:KeyboardEvent):void
//            if (event.keyCode == Keyboard.LEFT)
//                if (sp.x > 0)
//                    sp.x -= 65;
//            else if (event.keyCode == Keyboard.RIGHT)
//                if (sp.x < (stage.stageWidth - sp.width))
//                    sp.x += 65;
function onclick(e:Event) {
    sfx_gun.play();
    sp.y=555;
    var bl:Sprite = new bullet();
    bl.y=sp.y;
    bl.x=sp.x;
    bulletholder.addChild(bl);
//function onexit(e:Event):void {
//removeEventListener(MouseEvent.CLICK, onclick);
//removeEventListener(TimerEvent.TIMER, onstart);
//removeChild(bulletholder);
//removeChild(sp);
quitb.addEventListener(MouseEvent.CLICK, remove);
function remove(e:MouseEvent):void{
removeChild(bulletholder);
removeChild(sp);
removeEventListener(Event.ENTER_FRAME,onenter);
removeEventListener(MouseEvent.CLICK,onclick);
tm.stop();
gotoAndStop("final");

While updating my iphone 4 to 5 I'm getting an error message 'connection is timed out. please check your internet settings' whereas my connection is very much active. Any suggestions!

While updating my iphone 4 to 5 I'm getting an error message 'connection is timed out. please check your internet settings' whereas my connection is very much active. Any suggestions!

Check to see if you anti-virus software running, that will at times interfere with the connection with the Apple server.

After the latest updat to Mavericks 10.9.3, my imac continues to loop back to the login screen...Suggestions??? THANK YOU VERY MUCH!

After the latest updat to Mavericks 10.9.3, my imac continues to loop back to the login screen...Suggestions??? THANK YOU VERY MUCH!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Capacity:|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/;END { if(NR<100)print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2[01].+/,"",$3);b=b"\n"$2" "$3" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status "-F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL'" '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ test "$v"&&echo "$_";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Hello, i´m trying to do a proyect that requires modulate and demodulate a text in QAM. i´ve been trying this for days but i can´t come uo with a solution, if anyone can help me, that would be great. thank you very much

hello
i´m trying to do a proyect that requires modulate and demodulate a text in QAM. i´ve been trying this for days but i can´t come up with a solution, I can not retrieve the text I am modulating and i do not understand why. I am new to using Labview and would appreciate some help.
if anyone can help that would be great.
i have attached the vi that i´ve done.
thank you very much
Attachments:
intentoproyectocom2.vi ‏78 KB

I beleive they used the same concept that they did in iOS. One folder deep. If you think they should implement somehting more, then please use the feedback links in the forums FAQs to leave your comments and suggestions.
Jason

Hi there, I changed my passcode but forgot it and ive tried to back my phone up but i need to type in my old passcode! any suggestions? thank you very much

hi there, I im 13 years of age and i recently changed my passcode but forgot it and ive tried to back my phone up and i dont really want to restore it without backing it up and i need to type in my old passcodeto back it up ! any suggestions? thank you very much appreciate your help

If you've never synced while this passcode was enabled, you will not be able to backup now without first entering the passcode. bbfc's post is incorrect.
You will have to force the phone into recovery mode & restore it, as described here:
http://support.apple.com/kb/ht1212
If you don't have an existing backup to restore to your phone, then you will lose all of your data, as your only option will be to restore as new to remove the passcode.

Can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

Hello, I just bought a Snow Leopard and I have tried ti install this on my macbook pro 2008 (10.5.8) and I can not do it. I have to erase the hard drive before in order to succeed. Please tell me step by step what to do. I appreciate very much your help.

Hello, I just bought a Snow Leopard and I have tried to install this on my macbook pro 2008 (10.5.8) and I can not do it. I have to erase the hard drive before in order to succeed. Please tell me step by step what to do. I appreciate very much your help.
Thanks

Here are the directions:
http://support.apple.com/kb/HT3910?viewlocale=en_US
Ciao.

Hi i need the email of the apple store chicago michigan avenue. is to ask for a copy of the sales receipt from an iPad and I do not find your mail from anywhere thank you very much

hi i need the email of the apple store chicago michigan avenue.
is to ask for a copy of the sales receipt from an iPad and I do not find your mail from anywhere
thank you very much
my mail is [email protected]

The one on North Michigan Av. ? You'll have to call, I couldn't find an email address.
Apple Store
North Michigan Avenue
679 North Michigan Avenue
Chicago, IL 60611
(312) 529-9500

My mac has started displaying a message stating "You need to restart your computer". Web says it's kind of kernel panic! Is this a hardware problem? Do i need to contact my distributor? please help..it annoys me very much..

My mac has started displaying a message stating "You need to restart your computer". Web says it's kind of kernel panic! Is this a hardware problem? Do i need to contact my distributor? please help..it annoys me very much..

Hello welcome to the ASC user to user forums
please see these support documents
http://support.apple.com/kb/TS2570
http://support.apple.com/kb/TS1440
http://support.apple.com/kb/HT1455
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/HT1379
http://support.apple.com/kb/ht1379
http://support.apple.com/kb/HT1509

I have an iPhone 4s just eight months, it is normal that the battery lasts only 3 hours? please help me thank you very much.

I have an iPhone 4s just eight months, it is normal that the battery lasts only 3 hours? please help me thank you very much.

Three hours if definitely NOT normal. I get at least 48 hours out my 2 year old iPhone 4S' battery with light usage. Did you do the iOS 7 update on the phone it self (OTA) or through iTunes? In my experience most problems are caused by the OTA updates. For this reason I ALWAYS update using iTunes on my computer.
I would suggest restoring your phone using iTunes on your computer and setting it us as a new phone. This downloads a fresh copy of iOS 7.1 from Apple and installs it on your phone. Just make sure that you transfer all purchased items (apps, music, etc.) as well as photos to your computer before restoring as the restore will completely wipe your phone. Do not restore from a back-up. Yes, you will loose all your data on the phone but restoring a back-up can restore the problem you are currently having back to your phone. Once your phone has been restored you can manually sync back your apps and music.
Before restoring you can also check to see that battery-killers like Location Services, Background App Refresh, etc are only turned on for the apps that really need it. I recently read and article that said that the Facebook app can be a real battery killer. If you have this app installed turn of location services and background app refresh for this app and see if that helps. Also go to Settings / General / Restrictions / Location Services / System Services and turn off all the options in that menu. Your phone does not need any of those to function. Constantly using your phone's GPS is a huge battery killer. I only have Location Services enabled for Find my iPhone and Background App Refresh is turned off completely.
I hope this helps.

Your Suggestions on Adding External LCD / LED Monitors to MacBook Pro?

My current work station is a PowerPC G4 Dual 867Mhz with dual 19" CRT displays. I use this for design work (Adobe Illustrator); photo restoration (Photoshop); & online sales.
I was down to my last two CRT monitors, and wanted to perhaps start porting some of the graphic intense work to a faster computer so I bought this MacBook Pro:
http://support.apple.com/kb/SP499
I have not actually had a chance to use the MacBook Pro - it and all the accessories are still sealed - I couldn't afford the down time to set it up.
I am wanting to add a external monitor to the MacBook Pro that would be suitable for detailed design work with accurate color, true blacks, and the ability to be correctly calibrated. Since I may be still doing work on the G4 with software that will not run on the MacBook Pro I'd like to perhaps buy 3 matching monitors , 2 to replace my crt units and 1 for the MacBook, so that I can closely match the design output between the G4 and MacBook Pro.
I briefly tried a inexpensive LCD TV with a PC hookup on the G4 to get some idea of how an lcd would look. The LCD TV had a native resolution of 1440 X 960, which is a 3:2 aspect ratio, but that resulted in designs elements being distorted (i.e., squares look like rectangles). In 4:3 mode the TV did not distort the design elements, but the picture was not crisp / sharp and appeared soft. From what I've read this is because the lcd, unlike a crt, can't correctly emulate resolutions other than the native resolution built into the screen (i.e., its software guesswork). I also did not like the fact than in 4:3 mode it left black areas on the right and left edges of the screen.
I typically work in a 4:3 aspect ratio with a resolution of 1024 X 768, but a higher resolution of say 1600 X 1200 would be o.k. So what are your suggestions as to finding a lcd / led monitor that has a 4:3 aspect ratio? So far I've found limited information on what appear to be old monitors - there's one on Dell's site; for example, that says it has 1600 x 1200 native resolution, but a review also says its the same monitor they've been making for 5 years (besides I don't think I'd like the idea of hooking a Dell into my Mac). Found a few references to Lacie and NEC.
I really don't understand the monitor manufacturers, including Apple, that claim their monitors are for design work, when they don't offer native a 4:3 aspect ratio. How exactly am I to complete designs when circles are ovals and squares are rectangles?

"Take a flash drive with some representative PDF files saved from Illustrator to your nearest Apple Store or Apple reseller and ask for a demonstration using one of Apple's beautiful 27" 2560 x 1600 monitors. It would replace both of your 1024 x 768 CRTs with lots of additional desktop real estate to spare."
1. Well, actually no since I do not have fixed 1024 x 768 crts since crts do not have fixed resolutions. I can easily set each monitor to a variety of other resolutions including 1600 x 1200. Actually the Apple display would be a step down in total working area if I used the largest common resolution of 1792 x 1344 and certainly not worth the extra cost for the space gained if working at 1600 x 1200.
2. Unfortunately the display requires 10.6, which does not work on a G4 Dual 867Mhz. It would not even work on my MacBook Pro that I've not had a chance to use yet as it comes with 10.5. Also, 10.6 drops supports for PowerPC emulation so that means buying hundreds of dollars in new software. I use Apples only, but one thing I hate about the company is what many perceive is their "elitist attitude" toward their users - do they really think most people in the real world have so much money that in order to use Apple's new 27" display that they have to go out and spend more than the display costs on updating their computer and software. I am not a zombie fanboy willing to buy anything just because it has Apple on it.
3. Like most people I do not live by an Apple store or a Apple reseller, even the local Best Buy does not carry Apple computers in their store because the retail space does not justify the resulting sales (not that I would buy anything there anyway as they are over priced). I am really not interested in driving several hundred miles to the nearest store.
4. For a $1,000 I expect a monitor to offer a native 4:3 (1600 x 1200) aspect ratio - certainly Apple knows that this is the preferred working environment of many CAD and graphic users but they chose not to offer this in the display, thus the Apple display is really seems geared toward pop corn munching movie watching consumers.
5. This display is not actually made by Apple, its probably LG or one of their other suppliers.

Having a horrible time with this hardware - VZW help very much appreciated

This post is in regards to the HTC Droid DNA, and details my current support dilemma with VZW. If a VZW rep could please read this and comment on a way to find a solution, or if any other users have been in a similar position, your advice would be appreciated.
It is no secret that there is a defect with the HTC DNA, which could otherwise be an excellent device. The problem: supposed firmware issues which cause the device's SIM card to dismount at random. Any calls to VZW will tell you that they released an update to fix the device. The problem: the success rate is very, very low. I suspect the problem is HTC's fault and not Verizon's, but I do feel it is up to Verizon to handle these issues with dignity.
I have this problem, to an extent that seriously makes this phone little more than an advanced paper weight. And with it being a device used primarily for work, to have the SIM card dismount upwards of 20 times a day is simply unacceptable. The device is defected, well documented, and very much experienced by a LARGE percent of the user base. Spend 5 minutes Googling and you'll see that there is no shortage of people experiencing this problem. The worst, is looking down at my phone only to find out that again, the SIM card is dismounted, and I'm not receiving work calls and people are becoming increasingly frustrated with me. Sometimes 1 reboot fixes it (for who knows how long), sometimes it has to be rebooted 4, 5, and even as much as 10 times to correct it. Sometimes you just keep rebooting and the issue never corrects itself. I've almost thrown it at the wall several times.
Now, here's my problem with Verizon.
They will replace the device with a refurb, but NOT FOR FREE if there is any visual physical damage to the phone. I had an idiot crack my screen about a week ago, and while I can understand why Verizon would have policies in place to fine individuals for returning broken phones (duh, that's probably why you want a warranty replacement), it is without question that a cracked screen has anything to do with this problem. It's a VERY well documented issue. A problem that I had before cracking my screen, and one that has becoming increasingly problematic, so much so that this thing isn't even a phone anymore.
I spoke with a Verizon rep who was happy to send me a refurb (what awesome service, I was thinking) but who at the last minute dropped on me the bit about any visual damage to the phone resulting in a non-refundable $299. The rep sympathized with me as she had the exact same problem with her DNA and had to have her phone replaced as well, but informed me that I was basically out of luck. Visual damage to phone once received by warehouse = $299, regardless of the fact that the nature of the return has nothing to do with the screen, and that it's very well understood that this is a manufacturer problem which has nothing to do with a cracked screen. Here's the kicker: I asked her if I could perhaps pay some sort of smaller fee for the broken screen - nope. I asked if I could take the phone to a professional to have the screen replaced, then send it in for replacement - nope. I asked if there was anything I could do to pay for the marginal damage of the screen crack - No, no, no.
This is absurd. I am not trying to cheat anyone but am left with no choice but to suffer with a defective device simply because Verizon does not care to make any sort of logical exception in this case. That is the epitome of poor customer service. There will always be exceptions, and a good company will recognize that and make sure their customers are cared for. If I did this with my customers, I'd be out of business. Too big to fail, I guess - the worst thing to happen to consumers.
Verizon needs to step up and take responsibility for selling a faulty device. I'd be happy to pay for the OEM parts to replace the screen assembly so that my device can be swapped with one that, you know, like works and all? Why can't this be arranged?
Comments edited as required by the Terms of Service.
Message was edited by: Admin Moderator

@Eliz404,
Having a working phone is definitely a must! I understand how frustrating this whole situation has been for you and I apologize for all the inconvenience.
You mentioned that the phone screen is cracked. Although this may have not caused the issues you are experience, it voids the warranty. If we replace the phone through the warranty you have to return your defective phone to us. Once the phone is received and physical damage is found, you are billed $299.99 for the device.
If you have insurance you can file a claim here http://bit.ly/07CrqPK and all you will be responsible for is the $99 deductible.
JohnB_VZW
Follow us on Twitter @VZWSupport

Which approach to take ? Request your suggestions

Hello all,
We are planning to implement custom work flow for a process in our group. The work flow is not related to any transaction in SAP. It is a request for a form release, where the entire process is happening outside SAP.
Please find the following details about the requirement :
1. We have 200 companies, with a total staff strength of 20k
2. Each company has different approval levels ( In one company, GM needs to approve this process, where as in another one HR executive's approval is enough)
3. We may need to integrate this form release with leave workflow ( we don't use leave workflow as of now) in future, so that this workflow should be triggered when a leave workflow is initiated.
Following are the options we found :
1. Use SAP custom workflow - We don't have a workflow consultant, hence is it tough to achieve ?
2. Use Portal   - Guided Procedures ?
3. Use a custom developed portal - Can it integrate with SAP in future?
Apart from these, is there any other way we can implement this?
Which of these options do you suggest?
For some of you, these may be real basic questions.
I would appreciate your suggestions on this.
Thanks in advance
Shobin

Hello Vijay,
Thanks for your response.
If we use SAP custom workflow, does it have the capability to have multiple levels of approvals for different companies using our R/3 Instance?
For example, Company A may have 3 levels of approvals required to complete this process, while company B may just need one approver step. Is there a way to handle this?
Its a really basic question, but I am not a workflow consultant. So, can you please explain me more on this?
Thanks
Shobin
>
vijay kumar wrote:
> Hi shobin jose
>
>   As you said
>
>
where the entire process is happening outside SAP.
>
> getting the data from SAP and all other process is done in front if your using JSP or ASP or any fron end tool. Then design only the workflow only in SAP. If you want to create new front end its would be very difficult. I would suggest then go for portal from SAP any front end tool provided by SAP. Don't try to develop a front end tool for workflow it will be very very difficult to get the mails and inbox every thing has to design. Instead SAP itself provides front end tool. You just buy based on your requirment.
>
> Regards
> vijay

Your suggestion is very much required

Similar Messages

Maybe you are looking for