Z report from table VBRK - Release to Accounting indicater

Hello,
Creating a Zreport from table VBRK, and only want to pick billing documnets which are released to Accounting. Is there an indicater in table VBRK, VBRP, or KONV, or somewhere else where i can filter these records.
Thanks

Hi
You can use the table VBUK field BUCHK, ie, if VBUK-BUCHK = 'A'.
The best manner is the view M_VMCFA. If you see in SE11 you can see as works for the field VBRK-RFBSK.
Regards
Eduardo
Edited by: E_Hinojosa on Sep 7, 2011 4:18 PM

Similar Messages

Adding new field KUONR in VF05 Standard Report from table VBRK

Hello All,
I need to add the Assignment Number Field KUONR from the table VBRK into VF05 standard Report and show the respective Assignment Number for the Billing Document.
Please suggest the exact OSS note and the process
The SAP Version is SAP ECC 6.0.
Thanks and Regards
Karthik

Hi Karthik,
Welcome to the forum!
Please refer to the thread given below. Hope it helps.
How to Add new fields to display in VF05
Regards,
Sridhar

Facing problem in selecting from table vbrk

Hi,
I have developed a simple report for calculating the total logistic cost.
That program was working fine in the development server.
Now in production, its not working.
While debugging i found that its getting stuck at a select query where its fetching data from VBRK table and is getting timed out.
What should be done for reducing the time?
Please help.
Thanks in advance
Nitin

Hi Naren ,Seshu & Aarun
   First of all thanks a lot for replying.
The structure of my select query is
START-OF-SELECTION.
SELECT cityc regiogroup bzirk INTO TABLE it_ztaluka_1
    FROM ztaluka_1
         WHERE    regiogroup IN   pregroup.
IF sy-subrc NE 0.
    MESSAGE 'No records in ztaluka_1.' TYPE 'E'.
ENDIF.
   I N I T I A L I S I N G   IT_VBRK   F R O M VBRK *******
IF NOT it_ztaluka_1[] IS INITIAL.
    SELECT vbeln bzirk regio cityc zzwerks knumv
       FROM vbrk
       INTO TABLE it_vbrk
         FOR ALL ENTRIES IN it_ztaluka_1
           WHERE     zzwerks IN pzzwerks
           AND        regio   IN pregio
           AND        cityc = it_ztaluka_1-cityc.
    IF sy-subrc NE 0.
      MESSAGE 'No records in vbrk.' TYPE 'E'.
    ENDIF.
    SORT it_vbrk BY vbeln .
The key field is vbeln,but that not included in my where condition as its not in my selection criteria also in the previous tables which r used in the program.
i found the order in the select qusery is not in the order of vbrk table.
That i will change.But since the key field is not included it will again cause problems na??

Report from Purchase Requisition Release to creation of PO

Hello everyone,
I have a question.
We at our company use Purchase Release strategy.
we release a purchase requisition from transaction me54n and after that a team picks the requisition up in ME57 and make a PO from there.
My question is there a SAP report that shows data from the date the requisition was released until the Purchase Order was made?
Thank you all for your help

Hi
I don't think so you will get date iwse report but you can try this..
Go in ME5A report and there give status B-(Po create) and execute report you will get PR list for which Po is created in system
Regards
Kailas Ugale

How to get Cube Request Reportability From Tables?

Hello,
What table contains the reportability status on a request in a cube? I want to know this so I can programitically figure out what cubes are reportable and which are not, thanks!

Hope RSODSACTREQ will give you the loaded request and reporting availability information.
Thanks,
Arun

How to retrive the Direct purchase entries from table level? S_ALR_87012050

Hi All
In our current project we need to retrieve the direct purchase report from table level. Can you please provide me the direct purchase related table? Normally we are executing the standard report S_ALR_87012050
to extract the direct purchase entries. We need to know which table has the direct purchase entries.
Regards
K.Gunasekar

K,
Your problem description is still insufficiently detailed.
It appears now that you are searching for asset numbers. Please confirm.
Your selection criteria "Inventory Number NE 0" doesn't appear to make much sense. Inventory number is not a quantity, it is the name of an object. I guess it is meaningful you have some inventory numbers named as '0'. I don't think this setting is causing your problem though.....
You didn't mention which table you accessed to discover that you had a perceived discrepancy. Which table did you browse to see the results you mentioned? Please describe the selection parameters for each table you reviewed, and the results for each table that you examined.
It is also the practice of many companies to archive asset data. If this is the case in your company, then the archived data will not reside in the 'A*" tables.
You mentioned that you used the same parameters to select the data. How did you select "Report Date" when you did the table extract? I am not aware of a field that is named "report date' in any of the tables mentioned.
Rather than slog through tables, you might want to try SE16, view "V_ANLAZ". This is a preconstructed linkage of ANLA and ANLZ that is used by S_ALR_87012050 as a starting point.
I really think you should consult with your ABAPers. In two minutes they can give you your answers. It will take me several messages and probably several days to get you the same answers.
Best Regards,
DB49

Select from vbak, vbrk and vbrp

Hi experts,
In one of my programs i hve to select the data from tables VBAK, VBRK and VBRP.
The requirement is:
parameters: p_matnr like vbrp-matnr,
 p_charg like vbrp-charg.
select-options: audat for vbak-audat.
upon entering the values on selection-screen,
i need to select FKDAT, FKIMG from tables VBRK and VBRP respectively.
Please help me in writing the selection.
Any help is appreciated.
Thanks a lot.

Hi,
Hope this will give u some idea..
select avbeln bfkdat into table itab from vbak as a inner join
 vbrk as b on
 avbeln = bvbeln where
 a~audat in s_audat.
if not itab[] is initial.
select fkimg into corresponding fields of table itab_final
 from vbrp for all entries in itab
 where vbeln = itab-vbeln and
 matnr = p_matnr and
 charg = p_charg.
endif.
Cheer,
Vikram
Pls reward fopr helpful replies!!

How to move a report from one account to another account

Dear all ,
How to move a reports from one account to another account.
These are reports sent automatically. Unfortunately, I do not know where to find them and how to export to another account.
Puru

Hi,
You can use the Transaction SCC1 to move the data from One Client to Another Client for a Client dependent table.
The data should be present in a Transport and you can import to Transport to any client using SCC1.
Contact the Basis team to know how to use SCC1.
Regards,
Aj

From which table we can find account details?

Hi,
I'm working on Inventory reports.
I have a scenario where I need to display the account details based on "REFERENCE_ACCOUNT" column in table MTL_TRANSACTION_ACCOUNTS.
From which table we can find account details?
Tahnkyou
BalaKrishna

Hi Bala
You can user tab table which have the information of every table exist in your schema.
you can use select from tab where tname like '%ACCOUNTS%'*
i think it will help u.

Report to display total and detail from table GLT0 and FBL3N

hi guys,
we have the requirement to show a report with total amount per GL account from table GLT0 and to as well display the detail from tcode FBL3N ..
shall i use normal report via SE38, if yes, what is the table that stores detail from FBL3N or does report painter support the above requirement..pls advice

use report SAPF070 as sample
(compare documentation!)
hope that helps
Andreas

Fatch data in ALV Reports from multiple Tables

Respected Sir,
How to fatch data in ALV Grid report from selected Field and selected Table.
Please Help and My require Field and Table is :
sono LIKE vbak-vbeln,
       sodat LIKE vbak-erdat,
       cust LIKE kna1-name1,
       pono LIKE vbkd-bstkd,
       podat LIKE vbkd-bstdk,
       item_no LIKE vbap-posnr,
       item_des LIKE vbap-arktx,
       name LIKE vbak-kunnr,
       pdate LIKE vbak-bstdk,
       acdel LIKE lips-lgmng,
       netweight LIKE likp-ntgew,
       ordval LIKE VBRP-netwr,
   CUST_MAT_NO LIKE VBAP-KDMAT,
       order_qty LIKE vbap-kwmeng,
       desp_qty(5) TYPE p DECIMALS 2, "LIKE lips-lfimg,
       balance(5) TYPE p DECIMALS 2,
       delv_no LIKE likp-vbeln,
       delv_dat LIKE likp-bldat,
       invoice LIKE vbrk-vbeln,
       exnum like J_1IEXCHDR-exnum,
       invoice_dat LIKE vbrk-fkdat,
       invoice_val LIKE konv-kwert,
       END OF it_out.
*Please Refere the following code and if u wnt to change at ur own ieda u can change and reply me back.*
*Thnaks In ADVANCE.*
*Please Do need full it.*
*Bhavesh Panchal*
*Baroda*
Also I Make Reports For SO : full coding is.
*& Report Z_NEW1
REPORT Z_NEW1.
TABLES : vbak,    "Sales Document: Header Data
         vbkd,    "Sales Document: Business Data
         likp,    "SD Document: Delivery Header Data
         vbrk,    "Billing Document: Header Data
         konv,    "Conditions (Transaction Data)
         lips,    "SD document: Delivery: Item data
         vbap,    "Sales Document: Item Data
         vbrp,    "Billing Document: Item Data
         kna1,    "General Data in Customer Master
         J_1IEXCHDR.
DATA : i_vbak LIKE vbak OCCURS 10 WITH HEADER LINE.
DATA : it_vbkd LIKE vbkd OCCURS 10 WITH HEADER LINE.
DATA : it_likp LIKE likp OCCURS 10 WITH HEADER LINE.
DATA : it_vbrk LIKE vbrk OCCURS 10 WITH HEADER LINE.
DATA : it_konv LIKE konv OCCURS 10 WITH HEADER LINE.
DATA : it_lips LIKE lips OCCURS 10 WITH HEADER LINE.
DATA : it_vbap LIKE vbap OCCURS 10 WITH HEADER LINE.
DATA : it_vbrp LIKE vbrp OCCURS 10 WITH HEADER LINE.
DATA : it_kna1 LIKE kna1 OCCURS 10 WITH HEADER LINE.
DATA : it_vbrp1 LIKE vbrp OCCURS 10 WITH HEADER LINE.
DATA : it_temp LIKE lips OCCURS 10 WITH HEADER LINE.
DATA : it_lips1 LIKE lips OCCURS 10 WITH HEADER LINE.
DATA : it_lips2 LIKE lips OCCURS 10 WITH HEADER LINE.
DATA : it_lips3 LIKE lips OCCURS 10 WITH HEADER LINE.
DATA : it_vbak1 LIKE vbak OCCURS 10 WITH HEADER LINE.
DATA : it_vbak2 LIKE vbak OCCURS 10 WITH HEADER LINE.
DATA : it_vbap1 LIKE vbap OCCURS 10 WITH HEADER LINE.
DATA : it_posnv LIKE zdelprt OCCURS 10 WITH HEADER LINE.
DATA : BEGIN OF it_out OCCURS 10,
       sono LIKE vbak-vbeln,
       sodat LIKE vbak-erdat,
       cust LIKE kna1-name1,
       pono LIKE vbkd-bstkd,
       podat LIKE vbkd-bstdk,
       item_no LIKE vbap-posnr,
       item_des LIKE vbap-arktx,
       name LIKE vbak-kunnr,
       pdate LIKE vbak-bstdk,
       acdel LIKE lips-lgmng,
       netweight LIKE likp-ntgew,
       ordval LIKE VBRP-netwr,
   CUST_MAT_NO LIKE VBAP-KDMAT,
       order_qty LIKE vbap-kwmeng,
       desp_qty(5) TYPE p DECIMALS 2, "LIKE lips-lfimg,
       balance(5) TYPE p DECIMALS 2,
       delv_no LIKE likp-vbeln,
       delv_dat LIKE likp-bldat,
       invoice LIKE vbrk-vbeln,
       exnum like J_1IEXCHDR-exnum,
       invoice_dat LIKE vbrk-fkdat,
       invoice_val LIKE konv-kwert,
       END OF it_out.
SELECT-OPTIONS: sono FOR vbak-vbeln.
SELECT-OPTIONS: customer FOR vbak-kunnr.
SELECT-OPTIONS: d_date FOR likp-bldat.
   LOOP AT it_OUT.
   select * into table i_vbak from vbak
   where vbeln IN sono.
   sono = vbak-vbeln.
   append it_out.
   modify it_out.
   endloop.
LOOP AT it_out.
      SELECT single vbeln netwr FROM vbak
          INTO (it_out-pono,it_out-podat)
          WHERE vbeln = it_out-sono.
          "it_out-item_no.
     append it_out.
   ENDLOOP.
    select * into table i_vbak from vbak
    where vbeln IN sono.
    call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
    i_structure_name = 'VBAK'
    I_grid_title     = 'Bhavesh Panchal'
    tables
    t_outtab = i_vbak
    t_outtab = it_out
     exceptions
     others = 1.

Hi Bhavesh Panchal ,
You have to create another internal table with fields which you would like to display in the ALV output.
once you fetch the data from different tables into respective internal tables. loop those internal tables and insert the field values to internal table which you want to display in ALV output.
Create field catalog for the internal table created for ALV output.
Hope it shall be useful.
Regards
Santosh Kumaar.M

How to generate report from two tables using DAO design pattern?

Hi,
Iam using struts with DAO pattern for my application. According to DAO design im creating model class for each table in my database with getter,setter methods. i have no problem when im generating report from one table. but if have i have to join two tables whatis the better way for doing that? is it good practise to create a new model contains properties from both the tables?
Please help me
Thanks in Advance
Rajesh

Dear Rajesh,
As per the pattern you are creating equivalent java objects for every database table under consideration in which each db field will become a private attribute and public getter and setter methods.
If you have to display data from one table the above approach is sufficient enough.
But in case your database is normalised ..lets take an example of Bank having Branch and Accounts tables. We dont need to repeat the whole information of the branch for every account in that branch. so we prefer to have a branch id in that table....this approach lot of insertion/deletion/updatation anomlies that may exists with the database...
now lets come back to our topic....we shall create two java objects 1) Branch 2) Account.....
When ever u just need to display simple report u can do it staright forward,,,,,now if u want to display branch information along with the account information....the two objects just created are not sufficient
So i suggest u the following approaches
1) Create an attribute of type Branch in the Accounts Object......
This shall serve the purpose of displaying the Btranch information
2) Create a collection object of type ( Vector or ArrayList) which can have objects of Account in the Branch Object,,,
Now its upto u how shall u fill up the objects with appropriate sql queries.
The method that i mentioned is followed by Oracle Toplink and Hibernate ....which provide Object to relation mapping layers.
Any queries ...revert back to me...
Mahesh

Create a report from scratch, add Table and Datasource Problem

Hi,
I'm using the latest Crystal Reports Runtime supplied for eclipse.
I want to create a report from scratch, add a Table and then add a ArrayList of Pojos as the Datasource.
But unfortunately depending on the ConnectionInfo I supply to the Table I get different errors.
I looked through the samples and see that I have to supply properties
like
"Database DLL", "crdb_javabeans.dll" and ConnectionInfo.setUserName("");
     ConnectionInfo.setPassword(null)
I looked through the forums and find different set of properties.
Actually because I am just working with Pojos I would have thougth that something like the following
would be sufficient:
ReportClientDocument doc = new ReportClientDocument();
            doc.setReportAppServer(ReportClientDocument.inprocConnectionString);
            doc.newDocument();
Table table = new Table();
table.setAlias("reportTable");
table.setName("reportTable");
doc.getDatabaseController().addTable(oTable, null);
doc.getDatabaseController().setDataSource(myCoolection, myClass, "reportTable", "reportTable");
So could someone tell me the right/minimum Set of Properties to make a Table get connected to Pojos?
Edited by: jack mann on Aug 31, 2010 3:25 PM

With XI Release 2, you can come quite close to creating from scratch:
http://technicalsupport.businessobjects.com/KanisaSupportSite
/search.do?cmd=displayKC&docType=kc&externalId=5074668
You need Service Pack 2:
http://support.businessobjects.com/downloads
/service_packs/crystal_reports_en.asp
Sincerely,
Ted Ueda

How to create APEX report from data in PLSQL table

Hi, I have a procedure that is creating/inserting records into multidimensional pslql table. I want to create a report and graph based on the data stored in plsql table. Can someone please advice how to can I select this data in apex OR point me to any sample code?
Thanks
Aali

Hi,
try to google something about ORACLE TABLE CAST
SELECT ot.yourcolumn
FROM
TABLE(CAST(yourplsqltablevariable AS userdefinedoracletype)) otE.g.
http://it.toolbox.com/blogs/oracle-guide/using-a-plsql-table-in-sql-11013
Regards,
R.

How to add entire new row at the top of table in pdf report from c# windows forms using iTextSharp

Hi for past 3 days i was thinking and breaking my head on how to add entire new at top table created in pdf report from c# windows forms with iTextSharp.
First: I was able to create/export sql server data in form of table in pdf report from c# windows forms. Given below is the code in c#.
using System;
using System.Collections.Generic;
using System.Configuration;
using System.Text;
using System.Data;
using System.IO;
using System.Data.SqlClient;
using System.Windows.Forms;
using iTextSharp.text;
using iTextSharp.text.pdf;
namespace DRRS_CSharp
public partial class frmPDFTechnician : Form
public frmPDFTechnician()
InitializeComponent();
private void btnExport_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
PdfPTable inner = new PdfPTable(1);
inner.WidthPercentage = 115;
PdfPCell celt=new PdfPCell(new Phrase(new Paragraph("Institute/Hospital:AIIMS,NEW DELHI",FontFactory.GetFont("Arial",14,iTextSharp.text.Font.BOLD,BaseColor.BLACK))));
inner.AddCell(celt);
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(inner);
doc.Add(table);
doc.Close();
The code executes well with no problem and get all datas from tables into table in PDF report from c# windows forms.
But here is my problem how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
As the problem i am facing is my title or Header(DCS Clinical Report-Technician wise) is at top of my image named:logo5.png and not coming to it's center position of my image.
Second the problem i am facing is how to add new entire row to top of existing table in pdf report from c# windows form using iTextSharp?.
given in below is the row and it's data . So how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
as you can see how i create my columns in table in pdf report and populate it with sql server data. Given the code below:
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
So my question is how to make my column headers in bold?
So these are my questions.
1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?
I know that i have to do some modifications to my code but i dont know how to do it. Can anyone help me please.
Any help or guidance in solving this problem would be greatly appreciated.
vishal

Hi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Z report from table VBRK - Release to Accounting indicater

Similar Messages

Maybe you are looking for