Zen mirco truble with wmp10 and 11 ... please Help me
I have find a Zen Micro 5 gb with firmware 2.2 ; but i have more and more truble with it !! I have more problem to transfert the music in because my pc not find the mp3 correctely :i have 2 pc : the first whit wmp and windows xp prof. find the creative zen micro whe i plug it in instal the driver; then when the dirver are installed if find again a new device and install again the drvier.. this neverending loop !! and i cannot use the player !! the second with wmp0 and windows xp prof. find the mtd device always but in the computer reurce it isn't find ! and also the creative or Windows mediasurce tell me the the device is not plugged !! but in the computer pannel i can find that the mtd device is on !!! i need to plugged off and plugget on the zen mirco more and more time for to have or 2 time the correct finding but only for a little cuple of minutes... whot i can do Message Edited by albysub on 2-27-20072:0 AM
You should talk to various institute.
Similar Messages
-
Problem with threads and simulation: please help
please help me figure this out..
i have something like this:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class DrawShapes extends JApplet{
private JButton choices[];
private String names[]={"line", "square", "oval"};
private JPanel buttonPanel;
private DrawPanel drawingArea;
private int width=300, height=200;
public void init(){
drawingArea=new DrawPanel(width, height);
choices=new JButton[names.length];
buttonPanel=new JPanel();
buttonPanel.setLayout(new GridLayout(1, choices.length));
ButtonHandler handler=new ButtonHandler();
for(int i=0; i<choices.length; i++){
choices=new JButton(names[i]);
buttonPanel.add(choices[i]);
choices[i].addActionListener(handler);
Container c=getContentPane();
c.add(buttonPanel, BorderLayout.NORTH);
c.add(drawingArea, BorderLayout.CENTER);
}//end init
public void setWidth(int w){
width=(w>=0 ? w : 300);
public void setHeight(int h){
height=(h>=0 ? h : 200);
/*public static void main(String args[]){
int width, height;
if(args.length!=2){
height=200; width=300;
else{
width=Integer.parseInt(args[0]);
height=Integer.parseInt(args[1]);
JFrame appWindow=new JFrame("An applet running as an application");
appWindow.addWindowListener(
new WindowAdapter(){
public void windowClosing(WindowEvent e){
System.exit(0);
DrawShapes appObj=new DrawShapes();
appObj.setWidth(width);
appObj.setHeight(height);
appObj.init();
appObj.start();
appWindow.getContentPane().add(appObj);
appWindow.setSize(width, height);
appWindow.show();
}//end main*/
private class ButtonHandler implements ActionListener{
public void actionPerformed(ActionEvent e){
for(int i=0; i<choices.length; i++){
if(e.getSource()==choices[i]){
drawingArea.setCurrentChoice(i);
break;
}//end class DrawShapes
class DrawPanel extends JPanel{
private int currentChoice=-1;
private int width=100, height=100;
public DrawPanel(int w, int h){
width=(w>=0 ? w : 100);
height=(h>=0 ? h : 100);
public void paintComponent(Graphics g){
super.paintComponent(g);
switch(currentChoice){
case 0: g.drawLine(randomX(), randomY(), randomX(), randomY());
break;
case 1: g.drawRect(randomX(), randomY(), randomX(), randomY());
break;
case 2: g.drawOval(randomX(), randomY(), randomX(), randomY());
break;
public void setCurrentChoice(int c){
currentChoice=c;
repaint();
private int randomX(){
return (int) (Math.random()*width);
private int randomY(){
return (int) (Math.random()*height);
}//end class drawPanel
That one's from a book. I used that code to start with my applet. Mine calls different merthod from the switch cases. Say I have:
case 0: drawStart(g); break;
public void drawStart(Graphics g){
/* something here */
drawMain(g);
public void drawMain(graphics g){
g.drawString("test", x, y);
//here's where i'm trying to pause
//i've tried placing Thread.sleep between these lines
g.drawLine(x, y, a, b);
//Thread.sleep here
g.drawRect(x, y, 50, 70);
}I also need to put delays between method calls but I need to synchronize them. Am I doing it all wrong? The application pauses or sleeps but afterwards, it still drew everything all at once. Thanks a lot!It is. Sorry about that. Just answer any if you want to. I'd appreciate your help. Sorry again if it caused you anything or whatever. .n_n.
-
Problems with titles and backgrounds PLEASE HELP
At the beginning of my movie, I have inserted a title (pixie dust) which prompts me to include a background. I have done so. However, when i play the movie in full screen sometimes the title doesn't even show up at other times the title shows but without the pixie dust feature. I have tried to rectify this using precision editor but it doesn't work. When I play the video in the project library the pixie dust feature shows up. Please help. What am I doing wrong?
This seemed to be a bug in iMovie v.8.0.6. I have the same problem independently of the font and the background but only at the beginning of the project.
To avoid this problem make a short transition before the title clip and the text will appear in fullscreen mode too.
Good luck. -
Macbook wireless network question with vista and xp PLEASE HELP
Ok I just bought a macbook computer and introduced it to a windows family using vista and xp computers. I was able to set up wireless networking and surf the internet with all computers. However I cannot see the windows computers from the mac but can see the mac on the windows computers. I have a linksys wrt54g router. I tried everything and Im unable to see other computers or the printer thats attached to the desktop pc using vista. I went ahead and purchased the extreme airport router and after being on the phone with apple care for 3 hours and reformatting the operating system on the mac I was finally able to see the other pc's and installed bonjour for windows on all windows based pc's and was able to print from the mac without a glitch but the windows based pc's were horribly very very slow printing using bonjour. Needless to say I didnt want to spend all the extra money on a apple router for all this to work and after doing so the printing from windows machines just plain *****. So I returned the airport extreme and Im back to the linksys. When the linksys wrt54g is hooked up I cannot see the printer or other windows machines. Any ideas please to keep my current setup so I dont have to go out and by more apple products for everything to play nice. Thanks
What is the exact model number of your Linksys router for this Linksys forum??
-
Intermittent connection with netgear1000 and orange, please help
Hi there,
I bought a mbp 2011 and installed orange broadband with netgear1000. I am having intermittent connection, anyone has an idea?
Thanks for the help would be much appreciated.
Lebake1.with ur laptop wired to the rtr, open IE. in the address bar, type http://192.168.1.1. it will ask for authentication. leave ther username blank and in password type admin.
2.on the setup page, click on the tab wireless and then select manual setup
3.change the w/l n/w name to ur preference, radio band to standard 20 mhz and standard channel to 6 and then save settings.
4. click on subtab w/l security, change the security mode to wep and in the key type any 10 digit no. and make sure this is ur password for the w/l. Then save settings
5.now try to connect to this w/l n/w on ur laptop
6. for ur PS3, go to n/w settings-internet connection settings-custom-and enterv the w/l settings manually.
Linksys Setup CD said "Use Win XP or better"
So i installed Linux -
recently updated mac to this version, and since then certain web pages timeout or server not found or they just hang, you get the address come up but the blue wheel spins and the page never loads. (this is the same in safari and chrome) but i can access some pages, and also thunderbird, msn messenger etc, i have cleared history, checked firewall, and done updates still no luck, also if i do get a page to appear ie: ebay / paypal etc they are in a strange format and then it fails at logins, is this a https/http problem or due to a upgrade or more sinister, please advise
You can try to reset (power off/on) the router.
You can try to disable IPv6<br />
See http://kb.mozillazine.org/Error_loading_websites -
Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!
... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that. -
my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.
Hey erinoneill24,
Thanks for using Apple Support Communities.
Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
iPod displays "Use iTunes to restore" message
http://support.apple.com/kb/ts1441?viewlocale=it_it
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
Have a nice day,
Mario -
I just got a new iPod touch 4th generation and I'm trying to connect to my router and my iPod says, 'Cannont find network.' I don't know what to do! No other networks come up on the list so I can't 'tag' along with thier wifi. Please help. I need advice.
What type network is yu router set up for? The 4G iPod can only connect and see 2.4 GHZ networl like B, G and the 2,4 GHz N. There is also a 5 GHz N but the iPod will not even seethat network.
See:
iOS: Troubleshooting Wi-Fi networks and connections
iOS: Recommended settings for Wi-Fi routers and access points -
I forget answer to my qustion with rescue email adrees please help me and send the answer to my main mail. Thank you very much
We are fellow users here on these forums, you're not talking to iTunes Support.
If you don't have access to your rescue email account, or you don't have one on your iTunes account, then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to add/change a rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
How do i update my camera raw? I can not find the download update I've just brought a new d4s and I'm using the iMac with cs6 version. PLEASE HELP..
The Adobe auto updater is pretty decent in CS6. Just go to the Photoshop Help menu > Updates.
You will be able to update ACR, Photoshop and Bridge right there, if there are in fact updates available. -
I reset my phone and it now receives calls that were meant for my husband. I know how to fix this with messaging and facetime, but can't seem to find how to make it stop with the calls. Please help.
It may be due to Continuity
The following quote is from Connect your iPhone, iPad, and iPod touch using Continuity
Turn off iPhone cellular calls
To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls. -
my ipod nano 6th generation plays , stops , fast foward and rewinds songs by itself. it also speaks song titles non stop even with the setting off . please help me.
Found this solution in another thread, what you want to do is go into the Nike Fitness thing, go to run, go to Spoken Feedback and set it to off. This should fix your problems.
-
I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!!! ASAP
Hi,
Check the iChat Menu > Preferences > Video Section > Bandwidth setting.
iChat needs to see a Minimum of 128kbps to do 1-1 chats in Video
For 3 and 4 way chats it needs 384kbps
Set the Bandwidth to 500kbps if it is set lower.
Also check the speed you are getting from your Internet supplier.
9:28 PM Thursday; February 23, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
imovie is in my finder but I cannot open it. I have updated it and it appeared in a window when I swipe up with 4 fingers. Please help?
What happens when you double-click the iMovie icon in the Applications folder?
Maybe you are looking for
-
i have a ipod 5th gen and want to change my old account to a new one and transfer the gift cards i redeemed on it
-
I'm using Labview 8.2 with Internet toolkit. I'd like to connect to multiple FTP sites, and download files from all sites simultaneously. I would simply use parallel cycles to do that, but it's not possible because the toolkit's FTP VIs are not reent
-
Java.lang.StringIndexOutOfBoundsException: String index out of range: 3
I have just downloaded Jdev (10.1.3.1) and am trying out the tutorial "Introduction to JavaServer Faces using JDeveloper". When I try to run the Welcome.jsp I get the following : java.lang.StringIndexOutOfBoundsException: String index out of range: 3
-
I have a casio camera DSC W70 I upload photos with. What is a .THM
I am able to upload my movies and photos. But I see that .MPG (The file I am always able to open always has an exec file below it titled .THM that is the same # as the MPG file. For example: MOV00903.MPG MOV00903.THM Is this THM for PC users and shou
-
KMC didn´t work with pcd write-protect mode
Hello, I have activated the write-protect mode for the PCD in our Portal. Everything is working fine. After restarting the portal-server, the kmc-component didn´t work anymore. After disabling the write-protect mode and restarting the server, kmc wor