ZIP Code Barcode Printing In XML publisherf

Hi ,
I want to the postal bar code should be type 900 for 5 digit zip code or type 905 for 9 digit zip codes in xml publisher.
Please give me idea how to do it.
If anybody already implemented pls call at 9399908312.
It is very urgent
Thanks in Advance
-Chandra Byna

Can you use choose or if ocndition to do it ?
you can use string-length function to check whether 5 digit or 9 digit.
string-length ( string )
Returns the number of characters in the passed string.
string-length('John Dakoyta') returns 12

Similar Messages

Barcode printing in XML report PDF output

Hi All,
I want to print barcode of invoice number / purchase order number in the XML report PDF output.
Anyone please suggest me with your ideas and experience.

Hi Bogdan,
The steps mentioned in the doc is what i did in order.
I couldn't understand the step # 13 & 14.
Log in as XML Publisher Administrator
Navigate to Administration --> Font Files --> Create Font File
Available fields are Font Name and File
--> for Font Name, choose any descriptive name
--> file will browse your PC to locate the font file
Navigate to Font Mappings -->Create Font Mapping Set
Mapping name is the name you will give to a set of fonts.
Mapping code is the internal name you will give to this set
Type: 'PDF Form' for PDF templates. 'FO to PDF' for all other template types.
Create Font Mapping (this allows you to add fonts to a set)
Font Family is the exact same name you see in MS Word under Font. If you don't use the same name the font will not be picked up at runtime.
Style and weight must also match how you use the font in the RTF or PDF layout template. Normal and Normal are good defaults.
Language and Territory should remain blank (NULL) unless you have a strong business reason, as these fields can cause the font not to be picked up at runtime.
Navigate to Configuration General -> FO Processing -->Font Mapping Set. This can also be done at Data Definition and Template level, via the corresponding Edit Configuration button on those pages. The hierarchy is Site-> Data Def -> Template.
Select your new mapping set.
Make sure the font is not referenced under File --> Properties --> Custom in the RTF template file.
Under General, set a Temporary Directory. The font will be stored under a /fonts directory at runtime, initially created the first time the font is used.
Upload a template that uses your special font and test using preview or by submitting a concurrent request.

Zip Code Lookup

Hi guys,
Ok, I've had a project dumped on me that is ridiculously
complicated given my level of ability. I've explained to them that
I am NOT the guy for this. They're in a real jam though, so while
they're trying to find someone else I told them I'd see what I can
do.
Basically, it's a political action page. You watch a short
flash video, then click a button to send email to the candidates
running to represent you. It's been built (kind of) using PHP by
someone else, but has so many bugs (and I don't know anything about
PHP) that I think my only hope is to try and re-write the whole
thing in Coldfusion (which I know the basics of).
Thankfully the mySQL database is already done and working. I
just need to build the pages. The real sticking point: on the "tell
a candidate" page, they want a user to fill out their street
address, click a button, and have the application automatically
find their full zipcode and then display a page listing the
candidates running to represent that district (this is limited to
one state, thank god).
I can handle the database-driven stuff to return email links
for their candidates (I think)... but how can I use Coldfusion to
find a person's full zipcode based on their street address?
Thanks for ANY ideas... the more dumbed-down the better!
Joe

It's no big deal, StearmanDriver. You already have a good
solution. Yahoo!
All you have to do is
get a
Yahoo App ID. You can then use it with, for example, the cfhttp
tag to get the zip code. The service is free, too.
Suppose your Yahoo App ID is
vmuNNhtDEr32Ms8pmwEyvoAdClQQabcploMMth2iY_GXMK456Mruav56P09iuQk7.BBFtC--.
(This is a fake ID I've just created to illustrate the process. But
it is similar to the one Yahoo will send you.) Suppose also that
you wished to know the zip code of the Hilton Garden Inn Hotel in
Commercial Street, Portland, Maine.
The result, cfhttp.FileContent, is a short XML document.
However, it gives you more bang for your buck
(see actual result below). It includes, besides the zip, the
latitude and longitude of the place.
To get the zip code, simply parse the XML. The complete code
is something like the one below.
actual result, cfhttp.fileContent:
<?xml version="1.0" ?>
<ResultSet xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance"
xmlns="urn:yahoo:maps" xsi:schemaLocation="urn:yahoo:maps
http://api.local.yahoo.com/MapsService/V1/GeocodeResponse.xsd">
<Result precision="address">
<Latitude>43.657646</Latitude>
<Longitude>-70.250313</Longitude>
<Address>65 Commercial St</Address>
<City>Portland</City>
<State>ME</State>
<Zip>04101-4703</Zip>
<Country>US</Country>
</Result>
</ResultSet>

Printing QR-Code barcodes in SAP smartforms

Hi,
Is it possible to print QR-Code barcodes in SAP smartforms using system barcode font? Can anybody please let me know the font settings for QR-Code in SE73 font maintenance?
A sample QR-Code lablel can be found [here|http://images.orkut.com/orkut/albums2/ATUAAADhaahG5MxsqQ66lcSO9oHRWD3X8zh7yv1kEakKwMtVHchChN1WfZlM__2D0_o8H7AS4_UaTTCymQQtvXHb9-q3AJtU9VCWnzkZ4gC1sVnCekVuQ90qmhzeMw.jpg].
Regards,
Milan

Hi Milan,
I'll blog in SDN about my research that I presented at TechEd during session CD119 (blog) but I'll begin sharing with you some ideas.
Basically, without relay on any printer specific driver I would propose to follow the following steps:
1.Generate the QR Code image file (.PNG) with one of the methods presented in the following pages
2.Upload the image into the SAP system
2.1 Convert the generated file (file.png) to TIFF using SAP IGS class CL_IGS_IMAGE_CONVERTER (see GRAPHICS_IGS_IMGCONV_DEMO)
2.2.Upload. Use report RSTXLDMC to upload the image into SE78
3.Include the image into the Form:
3.1.SAPScript/:INCLUDE ZHEX-MARCO-name OBJECT TEXT ID ST
If everything is clear, the missing point should now be the first one. To generate the PNG from ABAP I found some options if you like, the better I think is presented in my open source project called abap2qrcode published here http://code.google.com/p/abap2qrcode/.
I know it's not trivial and I'm curious to know what do you think about it.
Sergio

Print Campaign letters sorted by ZIP code

Hello SDN,
we want to print out the letters of a Campaign soted by the ZIP Code. We have 6000 Business Partners in our Target Group. If we not print them sorted by ZIP Code we had to pay 0.45 Euro per letter. If we print them sorted by ZIP Code it costs us only 0.25 Euro. That are 1200 Euro in total.
Is there a BAdI or Customizing which we can set up to get the output sorted by ZIP Code? I found no setting for our communication channel "Letter with Activity creation".
Best regards
Gregor

Hello Christoph,
the print is done through a Campaign Channel. It uses a stripped down Version of smartforms build in transaction CRMD_EMAIL. There is no BAdI which I could use to influence the sorting when the printing is started during Campaign execution.
Regards
Gregor

When printing a Lync Online Meeting from Outlook 2010, it prints out xml code?

I have a couple of users that whenever they go to print out Lync 2010 Online Meetings from outlook 2010, it prints off a bunch of xml code and extra info (UCCCapabilities, UCInband, UCMeetingSetting, UCMeetingSent) all in XML.
Any ideas why it would be doing this, and only affecting a couple of users?
TAG

The following fix worked in our Exchange 2010, Lync 2010, environment.
Symptom
In Outlook, when users are printing (or print previewing) Lync
online meetings on shared calendars, an XML code is included in the printout.
Cause
When the shared calendar is opened, the folder is being
reported as read-only despite the user having read-write permissions. The Lync
add-in writes a property to the item (this succeeds) and then to the folder
(this fails) so then the code is not run that would mark the property as the
item as non-printable.
Possible Resolution
If the owner of the calendar creates an online meeting one time on their own calendar, this will
result in the property being created in the calendar folder. Then when a
delegate subsequently creates an online meeting on the calendar, the property
will already be on the folder, so the Lync add-in will not try to add it. This
avoids the error condition, and the property on the item will then be
successfully flagged as non-printable.
This worked for me. My user was a delegate for the managers mailbox. When she created an online Lync meeting on behalf of the manager, the meeting attendees would see the xml code in print preview as well as the printed document. The simple fix, as described
above, was just to access the managers Outlook profile from the managers computer, and create and send out an online Lync meeting (to one or more recipients, shouldn't matter). That's it. Now when the delegate goes to create any new online Lync meeting on
behalf of the manager, the visible code is no longer present. This works, as the description above says, because "the property will already be on the folder (after the manager creates an online Lync meeting on their own calendar), so the Lync add-in will
not try to add it. This avoids the error condition."

Printing to Citizen Thermal Barcode printer

Hello everyone,
I need some direction as to where to go next on this issue.
I am trying to take text data that contains commands with data and ascii control codes for a Citizen Barcode printer and allow my client (a web browser) the ability to print this data to its local printer and generate labels (not the raw data)
I have been able to code a servlet that can prints my barcodes to the local printers on my PC, but I cannot access a client's collection of printers from the web server.
It seems I need to render the data and do a window.print() in Javascript: Here is my servlet code that works when the printer is local to the web server.
        try {
          PrintService psCitizen = null;
          String sPrinterName = null;
          PrintService[] services = PrintServiceLookup.lookupPrintServices(null, null);
          for (int i = 0; i < services.length; i++) {
            sPrinterName = services.getName().toUpperCase();
log(Trace.DIAGNOSTIC, "Printer " + i + ":" + sPrinterName);
if (sPrinterName.toUpperCase().indexOf("CITIZEN") >= 0) {
psCitizen = services[i];
break;
if (psCitizen == null) {
log(Trace.DIAGNOSTIC, "Citizen printer is not found. Ps Count = " + services.length);
return;
DocPrintJob job = job = psCitizen.createPrintJob();
//String STX = "^B";
//String CR = "^M";
String STX = "\002";
String CR = "\015";
//String STX = (char)2 + "";
//String CR = (char)13 + "";
String s = "";
s += STX + "RN" + CR;
s += STX + "e" + CR;
s += STX + "M2982" + CR;
s += STX + "O0100" + CR;
s += STX + "f170" + CR;
s += STX + "qC" + CR;
s += STX + "L" + CR;
s += "H16" + CR;
s += "D11" + CR;
s += "PH" + CR;
s += "SC" + CR;
s += "W" + CR;
s += "Q0001" + CR;
s += "264400005930182DFW" + CR;
s += "232200005840339ORD" + CR;
s += "2e4411005360035BORD4721215005800001" + CR;
s += "241100003160222TEST" + CR;
s += "232100003160243Consignee:" + CR;
s += "241100003160268TEST INTERNATIONAL, PHILA" + CR;
s += "232100003160288Shipper:" + CR;
s += "232100003160314Deliver By:" + CR;
s += "232100002190192 5" + CR;
s += "23210000142031409/23/06" + CR;
s += "26210000310033412150058" + CR;
s += "232100001590192Pieces" + CR;
s += "241100002500192OF" + CR;
s += "231100003760015ORD4721215005800001" + CR;
s += "231100005840162Comment:" + CR;
s += "232100003160192 1" + CR;
s += "E" + CR;
s += "";
byte[] by = s.getBytes();
DocFlavor flavor = DocFlavor.BYTE_ARRAY.AUTOSENSE;
Doc doc = new SimpleDoc(by, flavor, null);
job.print(doc, null);
} catch (PrintException e) {
How can I using a servlet, JSP or Javascript get the user to print the label data from the client browser and have the thermal printer interpret the browser data as commands to print. I don't mind the browser user having to select the printer.
Thanks!

I don't think that you'll be able to do this correctly with JavaScript, as those control codes probably won't be rendered correctly in the web browser. I'm guessing you'll need a signed applet to properly receive the exact commands to send to the printer. You can use the Jakarta HttpClient to receive the exact commands from the Servlet, then some kind of print API to send the commands to the printer.
Brian

Retrieve city and state from zip code that is entered by user

I am trying to use AJAX to retrieve city and state from a table based on a zip code that is entered by the user. Two are text fields (zip code and city) and one is a SELECT field (state).
1. I defined an application item called TEMPORARY_APPLICATION_ITEM.
2. I defined an application process called SET_CITY_STATE as follows:
    a. Process point: on demand
    b. type: anonymous block
    c. process text:
<pre>
DECLARE
v_city VARCHAR2 (100);
v_state VARCHAR2 (2);
CURSOR cur_c
IS
SELECT city, state
FROM ZIP
WHERE zip = v ('TEMPORARY_APPLICATION_ITEM');
BEGIN
FOR c IN cur_c
LOOP
v_city := c.city;
v_state := c.state;
END LOOP;
apex_util.set_session_state('P2_CO_CITY',v_city);
apex_util.set_session_state('P2_CO_STATE',v_state);
EXCEPTION
WHEN OTHERS
THEN
apex_util.set_session_state('P2_CITY','Unknown city');
apex_util.set_session_state('P2_STATE',null);
END;
</pre>
3. Javascript is defined in the region header:
<pre>
<script language="JavaScript" type="text/javascript">

</script>
</pre>
4. In the HTML Form Element Attributes of the P2_CO_ZIP text item: onchange="pull_city_state(this.value)";
The city and state are not being populated. I checked the select statement and it is retreiving the city and state in SQL WORKSHOP > SQL COMMANDS.
I would like to use it for the mailing address as well, so I would need to make the application process / javascript a bit more generic to be used in two places.
I placed the application on apex.oracle.com:
Workspace: RGWORK
Application: Online Certification Application (28022)
Can someone assists, please.
Thank you,
Robert
Edited by: sect55 on Jun 2, 2009 4:11 PM

Hi Robert,
Try using XML instead of session state -
Change the application on demand process with the following script -
>
DECLARE
v_city VARCHAR2 (100);
v_state VARCHAR2 (2);
CURSOR cur_c
IS
SELECT city, state
FROM ZIP
WHERE zip = v ('TEMPORARY_APPLICATION_ITEM');
BEGIN
FOR c IN cur_c
LOOP
v_city := c.city;
v_state := c.state;
END LOOP;
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<body>');
HTP.prn ('<desc>this xml genericly sets multiple items</desc>');
HTP.prn ('<item id="P2_CO_CITY">' || v_city || '</item>');
HTP.prn ('<item id="P2_CO_STATE">' || v_state || '</item>');
HTP.prn ('</body>');
EXCEPTION
WHEN OTHERS
THEN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<body>');
HTP.prn ('<desc>this xml genericly sets multiple items</desc>');
HTP.prn ('<item id="P2_CITY">' || 'Unknown city' || '</item>');
HTP.prn ('<item id="P2_STATE">' || '' || '</item>');
HTP.prn ('</body>');
END;
>
in your javascript make sure you typing the application process name correctly as it is case sensitive.
Hope this helps,
Regards,
M Tajuddin
web: http://tajuddin.whitepagesbd.com

Problem with barcode print in Adobe From

Hello All,
We are using Adobe Forms to print our shipping labels and this as been working well for few years now. These labels include readable text and barcodes. The barcodes are 1-D but recently we now have a need to print 2-D barcodes.
We are able to print PDF-417 as a 2-D barcode on the form, but when we try to print Datamatrix barcode, the barcode does not show and instead we just see the text which should have been encoded as 2-D barcode.
We analyze the spool output file on the server to check the correct print controls are being sent to label printer. Our printer is a Zebra S4M using ZPLII. We send test form to our printer which will print two barcodes only (both 2-D), one is PDF-417 the other is Datamatrix. The spool output when viewed in Wordpad, is as below:
^XA
PRALH0,3
^XZ
CI13XA
^LL1219
^FO127,102
^BY3,,203
^B7N,,5,,,N
FHFD1234567890
^FS
^FO127,356
FHFD1234567890
^FS
^XZ
The ^B7 print control is the barcode PDF-417 control code. The Datamatrix control code ^BX is missing and should appear where there is an empty line. If we edit the spool output file and add the missing control code sequence, and then reprint the spool from SAP, then the Datamatrix 2-D barcode prints correctly.
So for some reason, the .zpl spool output file is not being generated with the ^BX control code sequence for the datamatrix barcode. We cannot find any information on why this is so.
We are running ECC6 SP11 (single stack) and ADS is running on a separate dual-stack BI system (NW2004s SP21).
Our Zebra S4M printer firmware is V53.17.6Z, and printer driver is ZebraDesigner 2.6.42 (Build 2382). Our SAP device type which is assigned is AZPL203. Our ADS version is 7.00.21.0.
We are seeing the same problem if we print test label from ECC or BI system. ECC kernel is 700 patch 266. BI kernel is 700 patch 254.
We have found SAP Notes related to incorrect ZPL format in ^BX for NW7.1 and NW7.1 EhP1, but not for NW7.0.
Has anyone else come across a problem like this before? Any advice would be much appreciated and duly rewarded.
Thanks in advance
George

Issue is resolved.
We updated our ADS to 7.11.5.0

Using AJAX to load city, state, metro area based on zip code

I'm new to getting APEX to work with AJAX properly. I've been reading some tutorials and trying to apply what they do to my situation, but I'm running into a problem. I have a text field item for zip code. What I want to happen is that when someone enters in a zip code, I want to use AJAX to populate 3 different select lists (1 each for state, city, and metro area) and to populate a checkbox (of neighborhoods based on the zip code as well). I'm looking at the examples in:
http://www.oraclealchemist.com/wp-content/uploads/2006/11/s281946.pdf
and
http://apex.oracle.com/pls/otn/f?p=11933:63
But they all use examples where the value of a text field item is used to populate 1 select list. I can't figure out how to apply that methodology to populate 3 select lists and 1 checkbox item. I've got all my SELECT statements written to populate these fields based on the value of the zip code text field item, but don't know how to convert what I already have to use AJAX.
Here are my SELECT statements:
P2805_STATE lov:
===========================================================================================
SELECT INITCAP(GEO_DATA_STATE.STATEFULLNAME) d,GEO_DATA_STATE.STATE v
FROM GEO_DATA_STATE, GEO_DATA_ZIP
WHERE isPrimary = 'P' and
trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
ORDER BY STATEFULLNAME
P2805_CITY lov:
===========================================================================================
SELECT UNIQUE (INITCAP(GEO_DATA_CITY.CITY)) d,GEO_DATA_CITY.CITY v
FROM GEO_DATA_STATE, GEO_DATA_ZIP, GEO_DATA_CITY
WHERE
trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
trim(upper(GEO_DATA_ZIP.CITY)) = trim(upper(GEO_DATA_CITY.CITY)) and
GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
ORDER BY GEO_DATA_CITY.CITY
P2805_METRO_AREA lov:
===========================================================================================
SELECT UNIQUE (INITCAP(GEO_DATA_METRO.METRO_AREA)) d,GEO_DATA_METRO.CODE v
FROM GEO_DATA_STATE, GEO_DATA_ZIP, GEO_DATA_METRO
WHERE
trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
trim(upper(GEO_DATA_ZIP.METROCODE)) = trim(upper(GEO_DATA_METRO.CODE)) and
GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
ORDER BY 1
P2805_NEIGHBORHOOD lov:
===========================================================================================
SELECT UNIQUE (INITCAP(GEO_DATA_HOOD.HOOD)) d,GEO_DATA_HOOD.HOOD v
FROM GEO_DATA_STATE, GEO_DATA_ZIP, GEO_DATA_METRO, GEO_DATA_HOOD
WHERE
trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
trim(upper(GEO_DATA_ZIP.METROCODE)) = trim(upper(GEO_DATA_METRO.CODE)) and
GEO_DATA_HOOD.METRO_CODE = GEO_DATA_METRO.CODE and
GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
ORDER BY 1Do all these statements need to go in 1 on-demand process? Where do I go from here?

Andy, cool. This is starting to make more sense. THANKS A BUNCH! OK. I've gone ahead and modified the on demand process to suit my needs, so I have:
begin
owa_util.mime_header('text/xml', FALSE );
htp.p('Cache-Control: no-cache');
htp.p('Pragma: no-cache');
owa_util.http_header_close;
-- Building States list
htp.prn('<SELECT>');
FOR i in (
    SELECT INITCAP(GEO_DATA_STATE.STATEFULLNAME) d, GEO_DATA_STATE.STATE v
    FROM GEO_DATA_STATE, GEO_DATA_ZIP
    WHERE isPrimary = 'P' and
    trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
    GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
    ORDER BY STATEFULLNAME
LOOP
    htp.prn('<OPTION VALUE=''' || i.v || '''>' || i.d || '</OPTION>');
END LOOP;
htp.prn('</SELECT>');
-- Building Cities list
htp.prn('<SELECT>');
FOR i in (
    SELECT UNIQUE (INITCAP(GEO_DATA_CITY.CITY)) d, GEO_DATA_CITY.CITY v
    FROM GEO_DATA_STATE, GEO_DATA_ZIP, GEO_DATA_CITY
    WHERE
    trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
    trim(upper(GEO_DATA_ZIP.CITY)) = trim(upper(GEO_DATA_CITY.CITY)) and
    GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
    ORDER BY GEO_DATA_CITY.CITY
LOOP
    htp.prn('<OPTION VALUE=''' || i.v || '''>' || i.d || '</OPTION>');
END LOOP;
htp.prn('</SELECT>');
-- Building Metro Area list
htp.prn('<SELECT>');
FOR i in (
    SELECT UNIQUE (INITCAP(GEO_DATA_METRO.METRO_AREA)) d, GEO_DATA_METRO.CODE v
    FROM GEO_DATA_STATE, GEO_DATA_ZIP, GEO_DATA_METRO
    WHERE
    trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
    trim(upper(GEO_DATA_ZIP.METROCODE)) = trim(upper(GEO_DATA_METRO.CODE)) and
    GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
    ORDER BY 1
LOOP
    htp.prn('<OPTION VALUE=''' || i.v || '''>' || i.d || '</OPTION>');
END LOOP;
htp.prn('</SELECT>');
-- Building Neighborhood list
htp.prn('<SELECT>');
FOR i in (
    SELECT UNIQUE (INITCAP(GEO_DATA_HOOD.HOOD)) d, GEO_DATA_HOOD.HOOD v
    FROM GEO_DATA_STATE, GEO_DATA_ZIP, GEO_DATA_METRO, GEO_DATA_HOOD
    WHERE
    trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
    trim(upper(GEO_DATA_ZIP.METROCODE)) = trim(upper(GEO_DATA_METRO.CODE)) and
    GEO_DATA_HOOD.METRO_CODE = GEO_DATA_METRO.CODE and
    GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
    ORDER BY 1
LOOP
    htp.prn('<OPTION VALUE=''' || i.v || '''>' || i.d || '</OPTION>');
END LOOP;
htp.prn('</SELECT>');
end;It doesn't look like I would have to modify the appendToSelect function at all, correct? Is the checkbox that I need to populate handled the same way as these select lists? And it seems like I only need to make the 2 changes that you mentioned to get_AJAX_SELECT_XML function, right? So my javascript function should be like:
<script language="JavaScript1.1" type="text/javascript">
function get_AJAX_SELECT_XML(pThis,pSelect1,pSelect2,pSelect3,pSelect4){
if (document.getElementById('P2805_ZIPCODE').value.length == 5)
     var l_Return = null;
     var l_Select1 = $x(pSelect1);
     var l_Select2 = $x(pSelect2);
     var l_Select3 = $x(pSelect3);
     var l_Select4 = $x(pSelect4);
     var get = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=otn_Select_XML',0);
     get.add('TEMPORARY_ITEM',pThis.value);
     gReturn = get.get('XML');
     var sels = gReturn.getElementsByTagName("select");
     if(gReturn && l_Select1){
          var l_Count = sels[0].getElementsByTagName("option").length;
          l_Select1.length = 0;
          for(var i=0;i<l_Count;i++){
               var l_Opt_Xml = sels[0].getElementsByTagName("option");
               appendToSelect(l_Select1, l_Opt_Xml.getAttribute('value'), l_Opt_Xml.firstChild.nodeValue)
     if(gReturn && l_Select2){
          var l_Count = sels[1].getElementsByTagName("option").length;
          l_Select2.length = 0;
          for(var i=0;i<l_Count;i++){
               var l_Opt_Xml = sels[1].getElementsByTagName("option")[i];
               appendToSelect(l_Select2, l_Opt_Xml.getAttribute('value'), l_Opt_Xml.firstChild.nodeValue)
     if(gReturn && l_Select3){
          var l_Count = sels[2].getElementsByTagName("option").length;
          l_Select3.length = 0;
          for(var i=0;i<l_Count;i++){
               var l_Opt_Xml = sels[2].getElementsByTagName("option")[i];
               appendToSelect(l_Select3, l_Opt_Xml.getAttribute('value'), l_Opt_Xml.firstChild.nodeValue)
     if(gReturn && l_Select4){
          var l_Count = sels[3].getElementsByTagName("option").length;
          l_Select4.length = 0;
          for(var i=0;i<l_Count;i++){
               var l_Opt_Xml = sels[3].getElementsByTagName("option")[i];
               appendToSelect(l_Select4, l_Opt_Xml.getAttribute('value'), l_Opt_Xml.firstChild.nodeValue)
     get = null;
</script>
And then since all 4 items (3 select lists and 1 checkbox item) are populated based on the value inputted in the text field item, I would only need to add the following to the html form element attribute of my text field item, right?
onKeyUp="javascript:get_AJAX_SELECT_XML(this,'P2805_STATE','P2805_CITY','P2805_METRO_AREA','P2805_NEIGHBORHOOD');"Denes, thanks for the example. It seems like what I need to do is somewhere inbetween what you have and what's in the example on http://apex.oracle.com/pls/otn/f?p=11933:37. I have 3 select lists and 1 checkbox item that should all be populate depending on the value entered for the text item. Do I still need to split everything up then into a function and an on demand process for each select list and checkbox?

Problem with Barcode printing in sapscript

Hello All,
I am currently facing an issue with printing a bar code in my sap script.
Below is the scenario:
I am trying to print a delivery number as a bar code. I am using the system bar code BC_CD39C for the same.
i.e the system bar code is attached to the character format <XX>
<XX>&LIKP-VBELN&</>
The issue is, I am getting the barcode printed correctly but when i read the barcode with the reader
an extra alphabet is appearing
eg: if delivery number is 880001143
When i read the barcode it is appearing as follows 880001143W
Could you please let me know what would be the issue?
Regards,
Krishnakumar

hi,
i will suggest u to use new barcode technology.
goto se73.
click on system barcode. -
> change
then click on create----
> it will prompt u for choose barcode technology -
>
select new barcode technology -
> give name and short description
> then create any z barcode using system barcode like code39, code 128 barcode check this n create urs with same functions. then
that add newly created barcode in ur smartstyle and then use it .
plz feel free to ask.

To implement bar code in print out of form script

hi
can any one tell me steps to implement the bar code for a field in sap script layout
what code should is put and process step by step
quick answeres will be rewarded with points kindly let me know asap
regards
Arora

first u need to create a bar code charcter format and then user the charcter format which field u want to use it to.
make sure that u printer supports barcode printing.
if ur printer is a Zebra printer then u need to write the code in in zebra printing code.
Regards
Devanand

ADF Faces & BC 10.1.3.4: Barcode Printing & ADF version of WebUtil?

Hi all,
Our existing application is built with Oracle Forms/Reports 9i which also uses Oracle WebUtil 10g because we need to print bar code labels. Our oracle forms appilcation invokes "Host" commands which allows it to print directly to the server's printer ports, this is accomplished by invoking WebUtil functionality which somehow bypasses(probably not the correct term to use) the jvm security sandbox. We need to have a similar barcode printing functionality on our ADF Faces/BC application however I'm not aware of the existence of "ADF WebUtil" which can be configured to allow access to printer ports.
Here is some code snipets for the 9i Forms application for printing (which is done through Internet Explore Browser)
CLIENT_TEXT_IO.PUT_LINE(myPrinter, output_str);
If lineType = 'B' Then vertStartTemp := vertStartTemp + vertBStep;
Else vertStartTemp := vertStartTemp + vertAStep;
End If;
End Loop;
/* last line */
output_str := 'P1'||chr(13)||chr(10);
CLIENT_TEXT_IO.PUT_LINE(myPrinter, output_str);
CLIENT_TEXT_IO.FCLOSE(myPrinter);
EXCEPTION
WHEN OTHERS THEN
CLIENT_TEXT_IO.FCLOSE(myPrinter);
message(sqlerrm );
Raise Form_Trigger_Failure;
END;
Here is some java code which uses the awt library (only works locally due to jvm secuirty sandbox)
public void testZebraBarCode(ActionEvent actionEvent) {
//called from a commandButton action listner. will fail upon deployment to server because its trying to access native resouces.
try {
PrintService psZebra = null;
PrinterJob printJob = PrinterJob.getPrinterJob();
if (printJob.printDialog()) {
psZebra = printJob.getPrintService();
DocPrintJob job = psZebra.createPrintJob();
String s =
// Set Reference Point
// Clear Image Buffer
// Print direction (from Bottom of buffer)
// Set label Length and gap
"R0,0\n" + "N\n" + "ZB\n" + "Q122,16\n" +
"A160,2,0,3,1,1,N,\"DATA: CARUGATE\"\n" +
"B160,30,0,1A,2,7,50,N,\"612041600021580109\"\n" +
"A160,92,0,1,1,1,N,\"AIA AGRICOLA IT.ALIMENT.S - 594679/VR\"\n" +
"P1\n";
byte[] by = s.getBytes();
DocFlavor flavor = DocFlavor.BYTE_ARRAY.AUTOSENSE;
// MIME type = "application/octet-stream",
// print data representation class name = "[B" (byte array).
            Doc doc = new SimpleDoc(by, flavor, null);
            job.print(doc, null);
        } catch (PrintException e) {
e.printStackTrace();
Can anyone point me to the proper direction on how to accomplish this task?
Thanks,
Wes

Hi,
if you build a web application then you have to integrate a Swing based Applet to the web age to access the local client. You can't with native web means
Frank

How do I display an invalid zip code in a summary table

On my airshow website we have a feedback form, one of the questions is the zipcode where the visitor came from. This works fine. The summary results tab includes a lookup for the zipcode where I show the city associated with the zipcode and then how many responses came from that zipcode. This can be seen here http://www.hollisterairshow.com/feedback-results.php?tab=7
In testing, I found that an invalid zipcode is not displayed in the summary table, although it is counted in the total number of responses. I'd like to display the invalid zipcode and leave the City blank, or maybe put "Invalid zip code". The current code is displayed below, it's beyond my ability to figure out how I should change it to display invalid zipcodes and I'd really appreciate some direction on this.
I know I could validate the zipcode on entry but it's quite possible the zipcode table I have is out of date and i can't find a free downloadable list, so I'm thinking anything invalid could cause me to update my table.which is fine.
Thanks for any assistance.
Tony
<div class="TabbedPanelsContent">
<?php
// Make a MySQL Connection
$query = "SELECT feedback.zip, COUNT(feedback.zip), zipcodes.citystate FROM feedback, zipcodes WHERE feedback.zip = zipcodes.zipcode GROUP BY feedback.zip";
$result = mysql_query($query) or die(mysql_error());
// Print out result
while($row = mysql_fetch_array($result))
echo $row['zip']. " ". $row['COUNT(feedback.zip)']. " ". $row['citystate'];
echo "<br />";
?>
</div>

Use an outer join on the two tables so that results are returned for all feedback rows, instead of just matching rows. The column zipcodes.citystate will be NULL. In your recordset output, you can test for null in the column and populate it with "Invalid Zipcode" if you want.
You'll need to move the join to the FROM clause as I believe that MySQL does not support outer joins in the WHERE clause like most other DBMS's.

Barcode printing on report

Hi,
have any one tried printing a barcode in a classical abap report? if yes, then send procedure & piece of code for it

hi ginni,
refer the following thread it contains the sample code of printing barcode in reports:
Re: Barcodes on reports (NOT SAPSCRIPT)
it will definately help u
regards
rahul

ZIP Code Barcode Printing In XML publisherf

Similar Messages

Maybe you are looking for