Zoom in or out of the graph while VI is running

Hi All,
Currently I have a popup subVI that contains multiple plots of collected data for the user to view.  When the user clicks the "Stop" button on the subVI, this subVI will close.  So I have the plotting section of the program in a while loop.  I believe this is the reason why I was not able to use the graph palette to zoom in and zoom out right?  Should I just leave he plotting section out of the while loop then?
Thank you,
Lynniz
Solved!
Go to Solution.

Place the property node inside a case structure and enable it when the iteration terminal is "1". (not zero!)
And please place a small wait inside your loop, there is no reason it should spin that fast. (Since the data never changes in your example, the entire graph terminal and inner loops belong outside the main while loop. However, I assume that your real application is different )
NOTE: you could also use the "first run?" primitive or enable it when [i]=0, but in this case you would need a small sequence structure to ensure it happens after ther graph terminal is written for the first time.
Also note that xy graphs take complex data, simplifying the wiring and data structures.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • Can I zoom in or out using the Camera app on the iPhone 5?

    Can I zoom in or out using the Camera app on the iPhone 5?

    Pinch to zoom in and out.

  • Hello, i was wondering if you can help me figure out how to edit a video to zoom in and out with the beat of the music?

    Hello, i was wondering if you can help me figure out how to edit a video to zoom in and out with the beat of the music?

    Use markers on every beat.
    The edit the zoom/scale to the markers.
    Adobe Premiere Pro Help | Working with markers

  • How do i find out if the server admin daemon is running

    Hi All,
    I've got an OS X server that for some reason ( probably due to me pratting around) has decided not to have a working server admin prog. I can fire up the client program and point it at any of the IP addresses that the server is looking at and then you get an error message basically saying that the server admin daemon is not contactable.
    So ...
    1). How can i find out if the back end daemon is running
    2). what port(s) does it listen on
    3). How can I turn on some logging to see what's happening when I run serve admin
    4). Any other tips as to how to find out why its not working
    Rgds
    Alex

    You should post this in one of the forums in the Mac OS X Server v10.5 Leopard category. You'll get better response there.

  • I can't zoom in and out using the scroll wheel

      so i want to zoom in and out on photoshop how i always have...using ctrl and scroll wheel...
    but when i went to do it how i naturally do it, it didnt work..after some research i found you go into preferences, general and tick the box about zoom scroll or somthing.
    Yet when i go onto it i dont have any options about zooming !!?? from what ive seen i have less options than others.
    and im pretty sure it isnt only available on newer version..because i have done it before on really old photoshop versions.
    so any help would be appriciated, thanks

    Photoshop 7 doesn't have a preference for using  Zoom With Scroll Wheel like cs2 and later do, but holding down the Alt key and using the scroll wheel should work
    to zoom in or out.
    Does the Alt key work if you make a selection and then use Alt+Ctrl+D to bring up the Feather dialog?
    Does the scroll wheel work to change the layer blend modes by duplicating the layer and highlighting
    the layer blend mode of Normal in the layers palette and then using the scroll wheel to change blend modes?

  • How to zoom in and out on the effects timeline on premiere cc?

    I can zoom out on the project timeline with alt+mouse wheel but I can figure out how to do it on the effects panel and the project zoom doesn't seem to effect it.

    You need to Un Pin the clip first.
    Click on the Panel Menu in the Effect Controls and uncheck Pin to Clip.

  • Zoom in and out with the wheel

    Hello
    I have a mouse with a zoom button wich gives a direct access to the zoom in Adobe Reader. Unfortunatly, when I click it, I can zoom in by spinning the wheel up (the cursor becomes a magnifier whith a plus sign), but not zoom out by turning the wheel down.
    Checking the option "Activate the zoom with the wheel" in the preference menu allows to zoom in and out, but precludes from using the wheel for scrolling, so the option is useless.
    In fact it seems the zoom button of the mouse activates the function "zoom in" instead of "dynamic zoom", which would give the correct behavior. The mouse software (Setpoint, from Logitech) allows to configure the buttons per application, but has only one zoom option, which leads to "zoom in only" with Adobe reader.
    Do you know a work around for this ?

    My mouse scroll wheel increments/decrements at 2.4% per click of scroll.
    I'm using Photoshop CC (2014.2.1), Mavericks 10.9.5 on MAC Mini and a Bluetooth Gearhead Mouse BT9400.
    Same success with a wired optical mouse on a USB port.  2.4% per click of scroll.
    Did you try a different mouse or USB port yet?

  • Challan number missed in the documents while TDS payment run

    Hi All,
             I have run the TDS payment run in J1INMIS successfully. The clearing document number generated to all documents. Few documents doesn't get update the challan number but has cleared document number itself. How do I solve the problem and please let me know the root cause for the same.
    Thanks...

    Hi,
           Here my problem is the clearing document number has been generated to the accounting documents but the internal challan number was not generated. Only few documents getting this error. Mostly I use to run J1INMIS alone and its been working fine for the second and third quarter. The problem persist to the 1st quarter tds payment run only.
    Thanks...

  • Keep losing the signal while call is running

    Dears,
    my problem is in my new phone Z3 Dual, every thing in the phone is good and running properly but i noticed one problem recently.
    when i receive calls or starting calls, some time the signal is suddenly lost and call broke and i lose the phone call then it works again.
    my sim is nano sim and works just fine.
    kindly advise

    This is what I would do @samer711
    1. contact your carrier/network and ask for any network coverage issues
    2. get a brand new NANO SIM card, don't get a regular SIM card and cut it
    3. repair the phone with PCC or Bridge
    4. DO NOT install any antivirus or taskillers or battery apps, sweepers etc. 
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Whenever I zoom in or out using the trackpad I cannot re do this task without restarting Safari.

    Whenever I try to make a website bigger or smaller by "pinching" the trackpad I get stuck on that new size. The only way for me to change the size is to restart Safari. Is this a bug?

    Espen Vestre wrote:
    And at the times when it's working, it's very unstable in Safari and will quite often make the web page view "freeze" in a "half-magnified", "blurry" state. If that happens, scrolling the page or clicking links doesn't work. A double-click to zoom often "wakes" the page up again.
    I haven't had this problem for a while, but it occurred once yesterday (fixed with double-click-to-zoom twice) and today in my first attempt of using Safari after upgrading to 10.7.2!! (And despite the fact that I've disabled pinch-to-zoom in the preference pane) And this last time I couldn't fix it with a double click, I had to close and reopen the tab with the "frozen page" in it.

  • HT2845 how do I zoom in and out using the mouse?

    I often mistakenly zoom in on the safari screen with my mouse and don't know how to undo it or even how I've zoomed in.

    See if you have smart zoom enabled:
    (image from: http://magicmousehelp.com/smart-zoom-not-working-magic-mouse/)

  • HT5557 Can I add an interactive map as a widget? So I can zoom in and out of the map pin?

    I would like to add an interactive map as a widget to my ibook photos to show where the photo was taken. Is this possible or will I have to add a cropped image of the map?

    Perhaps this will help:
    iBooks Author: About HTML widget creation
    Regards.

  • How to get updated values from the loops while they are running

    Hello,
            I am having difficulty solving a very basic problem, how to access the updated values from the 'FOR loop' while its running?  Basically, the VI  I am currently working on calls two sub VIs. Each sub VI has a for loop, and both VIs may or may not run for same number of iterations. My goal is to read the values at each terminal inside the loop of both sub VIs, in the Main VI. I tried to achieve it using Global Variables, but in main VI it displays only the last iteration value from both sub VIs. Could anyone please tell me whrere am I going wrong? Is there any other/better way to achieve this.
    I appreciate any input on this issue.  
    Kudos are (always) welcome for the good post. :-)
    Solved!
    Go to Solution.

    Dennis,
                In attached VI, I can see the values changing in the sub VI from the main VI with the numeric indicator whose reference is passed on to the sub VI. Now if I wanted to store or use those values how do I do that? I tried to chnge the indicator to control and read from it (in the attached VI) , but the the indicator updates only once. Tried to create a property node and read the Value from it and it didn't work either.
    Thanks in Advance!
    -Nilesh
    Kudos are (always) welcome for the good post. :-)
    Attachments:
    main-1.vi ‏8 KB
    sub-1.vi ‏9 KB

  • I currently have one input but need to run two loops. I cannot get the two while loops to run so that they both pick up the same data, they are both picking up alternate samples. How can I get them to both pick up all of the values?

    The system I am trying to create calculates a number of values based on an input. I need to make the calculations and display the values for an entire production run and for each hour. The only way I know to do this is to create two while loops, one looking at all the values that are received and one looking only at the values for hour long periods.
    Any help would be great.
    Thanks
    RossH

    Why do you think that you have to have two loops to accomplish this task? Why not use one loop and accumulate the same data into two data sets based on the two sets of criteria?

  • Come on ADOBE!! When are you coming out with the patch for CP6 to run on Mavericks?

    Come on, you have known about this OS for well over a year, bring out the patch!! I am paying monthly for my subscription which will not work on my Mac, so maybe you should credit my account for 2 months for paying for something that won't work.
    And that is not including any of the issues I have had becasue of your pathetic security!
    Sincerely
    Rossco

    Hello,
    Welcome to Adobe Forums.
    Captivate 6.0.2 Patch for Mavericks ( Mac 10.9) is live at  http://www.adobe.com/support/captivate/downloads.html .
    Note : This is ONLY for Captivate 6.0.199 OR 6.0.1.240 users, for Captivate 6.1 patch will be available soon.
    Thanks,
    Vikram
    Adobe Support

Maybe you are looking for

  • Connection problem with LDAP

    Hi, Is it possble to connect 10g version of database using LADAP from forms 6i ? Thanks Bcj

  • ITunes can't sync - permissions issues

    I am receiving permissions issues when trying to sync my iPhone with iTunes.  This just started in the last week.  Background: When we purchased the iMac, we imported users from an old system.  The user IDs were different.  I have had to reset users

  • CS6 - Acrobat quits working. Even after uninstall, unable to reinstall.

    I've been through this process a couple of times, but now Adobe won't help fix it.  I have CS6 Design and Web Premium. Randomly anything associated with Acrobat X won't work/do anything. It almost pretends to open for a second, but then nothing happe

  • Organizer 8 will not launch after installing Windows 8

    I have PSE 8,0 and it was running just fine. Now I have installed Windows 8 and I can't open the organizer? Is there an explanation of this? Message title was edited by: Brett N

  • How do i activate the dreamweaver simple preload?

    The code i'm talking about is this: // Example: // simplePreload( '01.gif', '02.gif' ); function simplePreload();   var args = simplePreload.arguments;   document.imageArray = new Array(args.length);   for(var i=0; i<args.length; i++)     document.im