Zpool status in a zone shows zpool on which the zone is built

Hello,
We have a solaris 10 zone x, which is built on a zpool say tank.
when I run zpool status/zpool list in the solaris 10 zone x the zpool tank is visible. But the DR server for the same, built using the same config says "no pools available"
Is it possible to display the zpools in zone unless we have did a delegation/added zpool to the zone?
let me know your thoughts
cheers!!!!
Warm Regards,
Hemanth

the zpool is listed if you are using additional filesystems (add fs)
the zpool is not listed if only used as root filesystem, because
the root filesystem is mounted in the global zone.
best regards,
marcel

Similar Messages

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
Power off the AirPort by pulling the power cord
Wait a minute or two
Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
Release the reset button and allow a full minute for the AirPort to restart
Now try to configure the AirPort again. If you continue to see the same symptoms as before, the AirPort will need to be replaced.

Status Item image not showing

I have a status Item app andI am using a custom view. My image in the status item has been showing and working until recently. Is it something I have changed or maybe it was a bug that it was showing and now it fix. Please Help me fix this. Here is the relevant code:
AppDelegate.h
#import <Cocoa/Cocoa.h>
@class View;
@interface AppDelegate : NSObject <NSApplicationDelegate>{
    NSStatusItem *statusItem;
    View *_View;
    NSImage *statusImage;
    NSImage *statusHighlightImage;
    NSMenu *statusMenu;
- (IBAction)shutdown:(id)sender;
- (IBAction)restart:(id)sender;
- (IBAction)sleep:(id)sender;
- (IBAction)about:(id)sender;
@property (assign) IBOutlet NSWindow *aboutWindow;
@property (nonatomic, strong, readonly) View *View;
@property (nonatomic, strong, readonly) NSStatusItem *statusItem;
@end
AppDelegate.m
- (void)awakeFromNib {
    statusItem = [[[NSStatusBar systemStatusBar] statusItemWithLength:NSVariableStatusItemLength] retain];
    NSBundle *bundle = [NSBundle mainBundle];
    statusImage = [[NSImage alloc] initWithContentsOfFile:[bundle pathForResource:@"icon" ofType:@"png"]];
    statusHighlightImage = [[NSImage alloc] initWithContentsOfFile:[bundle pathForResource:@"hicon" ofType:@"png"]];
    View *view = [View new];
    view.image = statusImage;
    [statusItem setView:view];
    [statusItem setToolTip:@"Power Bar"];
    view.target = self;
    view.action = @selector(leftClick:);
    view.rightAction = @selector(showMenu:);
    [view release];
    [statusItem setImage:statusImage];
    [statusItem setAlternateImage:statusHighlightImage];
    [statusItem setMenu:statusMenu];
    [statusItem setHighlightMode:YES];
    [statusItem setView:[[[View alloc] init] autorelease]];
    [statusItem setTarget:self];
- (void)leftClick:(id)sender {
    NSLog(@"Left!");
- (void)showMenu:(id)sender {
    NSLog(@"Right!");
    [self.statusItem popUpStatusItemMenu:statusMenu];
- (void)dealloc
    [[NSStatusBar systemStatusBar] removeStatusItem:self.statusItem];
    [super dealloc];
View.h
#import <Cocoa/Cocoa.h>
@interface View : NSView {
    NSImage *image;
    NSImage *alternativeImage;
    id target;
    SEL action, rightAction;
@property (retain) NSImage *image;
@property (retain) NSImage *alternativeImage;
@property (assign) id target;
@property (assign) SEL action, rightAction;
@end
View.m
@implementation View
@synthesize image, alternativeImage, target, action, rightAction;
- (void)mouseUp:(NSEvent *)event {
    if([event modifierFlags] & NSControlKeyMask) {
        [NSApp sendAction:self.rightAction to:self.target from:self];
    } else {
        [NSApp sendAction:self.action to:self.target from:self];
- (void)rightMouseUp:(NSEvent *)event {
    [NSApp sendAction:self.rightAction to:self.target from:self];
- (void)dealloc {
    self.image = nil;
    [super dealloc];
- (void)drawRect:(NSRect)rect {
    [self.image drawInRect:self.bounds fromRect:NSZeroRect operation:NSCompositeSourceOver fraction:1];
    [self.alternativeImage drawInRect:self.bounds fromRect:NSZeroRect operation:NSCompositeSourceOver fraction:1];

Please Help

UWL status shows as pending thoguh the form is approved .

UWL status shows as pending thoguh the form is approved .
How is can happen .
How do i know which component in webdynpro it is calling for the status .
Please advice me to analysis the situation from my side also .

Hi Raj,
Well from my past experience I would say it was just a coincidence when approval and release happened in close vicinity of time. Check the time of the event occurrence in the log and also the time of approval. If they are very close then it might be the case that as soon as the approval happened someone released the PO directly from the transaction. Who did ? check the log for that. Event creator.
Now the thing is are you able to replicate this error again? or it was just one isolated incident.
Hope this helps!
regards,
Anuj Sethi

Has anyone tried to pair the Tzumi bluetooth headphones to their iMac? My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected". Multiple attempts get the same result.

Has anyone tried to pair the Tzumi bluetooth headphones to their iMac? My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected". Multiple attempts get the same result.

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

HT1551 after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

The update failed - using a USB to microUSB lead (that Apple annoyingly don't include!), try to restore the AppleTV software to current version software using instructions here:
http://support.apple.com/kb/HT4367
Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.

Workflow status column is not showing the internal status values (Inprogress, Started, Suspended, Completed)

I've created SPD 2013 workflow and deployed them onto that document library, This workflow execute on item update event. When updating library item, workflow triggered and completed successfully but workflow status column is not
showing the Internal Status values rather it is showing the Stage information. I've unchecked the "Automatically update stage name on workflow status" and republished the workflow. After that, it is still showing the stage information. Any help
is really appreciated.

Hi Venkadesh,
It is by design that 2013 workflow will show stage name in the workflow status column when
Automatically update the workflow status to the current stage name is checked.
And the workflow status column will be blank when Automatically update the workflow status to the current stage name is unchecked.
For existing workflows, the workflow status will still exists with the previous values after unchecking Automatically update the workflow status to the current stage name.
We can use Set Workflow Status action to update the workflow status value based on our needs.
Best regards,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Safari status bar no longer shows page load progress

Hi... Though it's been this way for a while now, perhaps since the start of whatever Safari version came along with OS X 10.8 Mountain Lion ??, I've finally become curious enough to ask about the following...
In times gone by, the Safari status bar at the bottom of the page would show page loading progress... You know, the old xx out of yy items complete or something like that??? But now, nothing... Nothing at all in the Status Bar while a page is loading... Nor is there a spinning gear in the URL line to show you something is going on... Instead, all there is is the blue progress bar that slowly moves left to right across the URL box to show you what is happening... And often that blue bar stalls where it just sits for quite a while... And when that happens I never know the details of what is going on...
Do I have something set up wrong??? Or did Apple decide we don't need to know what's going on while pages attempt to load??? I sometimes quit Safari when I have a secure page log on that appears to stall and all I have as feedback is a stalled blue progress bar...
All I ever see light up in the status bar is the URL of a link I might hover over on a page... Otherwise, nothing... That doesn't seem right... Again, am I doing something wrong in the Status Bar set up or is that all the Status Bar ever shows now???? And if the latter, why would Apple have chosen to stop letting us observe page loading progress??? At least that used to tell me something was happening.. A blue progress bar that stops moving doesn't tell me anything useful...
Any thoughts or help on this would be much appreciated... thanks... bob...

Mountain Lion 10.8.2
Safari 6.0.2
Robert Paris wrote:
Do I have something set up wrong???
Nothong is set up wrong.
That is the way Safari works as far as I know.
Best.

How to make the status of a sales order complete of which PART DELIVERY

How to make the status of a sales order complete of which PARTIAL DELIVERY has already done. <b>(Assigning rejection status not accepted)</b>

Hi Gyana
There is no document with me. But I can confidently say that because I am using this functionality.
In my case I have created a Order Reason as "Short Closed". once you short close this order only the balance quantity gets rejected (provided you have already made previous delivery and PGI).
Try it in one of your test clients if you have. Once it is short Closed it wont also show in the orders due for processing in Production.
Also you can generate reports based on this if your customer wants to know how many order he has short closed, qty of item short closed etc.
Try it.
Rgds
Sunil

How do I find duplicate songs which the latest itunes libary update does not show?

How do you find duplicate songs in itunes which the latest updated version of itunes does not show, where the older version did?

=Downgrading from iTunes 11 to iTunes 10.7=
Try activating the sidebar, menu bar, and status bar and see if this is close enough to the previous version to make you content. It is easier than downgrading and eventually you will be forced to run a newer iTunes unless you have an endless supply of the model computer you currently own.
You may be able to go back with Time Machine but this may involve restoring other items too (https://discussions.apple.com/message/20441404). Alternatively:
Back up your computer first, in case the unexpected happens.
Quit iTunes.
Get iTunes 10.7 from http://support.apple.com/kb/DL1576 or the direct download link at: http://appldnld.apple.com/iTunes10/041-7195.20120912.d3uzQ/iTunes10.7.dmg
Do a few preparatory steps by making sure all iTunes components are not running and cleaning old files.   See https://discussions.apple.com/message/20475394. Do steps 3 and 4. Steps 6-8 may be also useful but I don't know if they are essential. Some of the other steps are not necessary, duplicate steps listed later in my post or are perhaps even unhelpful in the process.
Replace the iTunes 11 application with iTunes 10.7. Simply dragging the application to the trash may not work. Lion (OSX 10.7) and newer systems have iTunes integrated into the operating system and deleting is a bit more involved. Two ways to do this are:
1. (Easier) Use the shareware Pacifist utility (http://www.charlessoft.com/) to install iTunes 10.7 including all associated system files. Details at http://forums.macrumors.com/showpost.php?p=16400819&postcount=6
2. (More work) Check this reference on how to delete the iTunes application itself:
    Delete iTunes in Mac OS X 10.7 Lion - http://osxdaily.com/2011/09/13/delete-itunes-in-mac-os-x-10-7-lion/
    After deleting the application there may be other files that need downgrading too. See the note about error -42408 at the end of this post. You may want to tuck these away somewhere safe until you have completed the installation of iTunes 10.7. I have not tested this but ideally if newer versions are not found then the installer will put in the old versions. This may include these files in /System/Library/PrivateFrameworks/ which apparently get updated by iTunes 11:
AirTrafficHost.framework
CoreFP.framework
DeviceLink.framework
iTunesAccess.framework
MobileDevice.framework
After doing one of the two procedures above you will have to rescue the most recent old iTunes library from your iTunes > Previous Libraries folder. Rename it "iTunes Library.itl" and replace the existing one in the iTunes folder. A newer version of iTunes irreversibly updates your library file so you have to replace it with the old one or you will get an error message. Note, this will revert your library to the version at the time of the upgrade and you will have to update any changes made since. See:
https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library from previous iTunes library file after upgrade/crash.
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
Other issues:
- https://discussions.apple.com/message/20432309 - solution to mobile devices saying they need to be restored after downgrading
- If you encounter error -42408:
iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - including specific error codes.
Alternatively, check https://discussions.apple.com/message/20441424 which requires you have a Time Machine backup (though possibly if you remove the newer version of these files old ones may be installed with the iTunes 10.7 installer - untested). A variant of this is at: https://discussions.apple.com/message/20448184
- Persistent "Show in iTunes Store" arrows after downgrade - https://discussions.apple.com/thread/4567064

Lately I have been getting a rectangular screen titled Login Setting, with my Username and Password and asking me to Login. This screen shows up on opening the computer and has never been seen before the last month or so.

Lately I have been getting a rectangular screen titled Login Setting, with my Username and Password and asking me to Login. This screen shows up on opening the computer and has never been seen before the last month or so. It has one box titled Login Credentials with a username and password field and a second box titled Login Status at the bottom where it says "Profile not found" in red. I've never seen this before and ignoring it does not effect any operations. Is this legitimate or some kind of identity fishing?

Hello,
Have you done the recent Security updates?
Is this from Sleep or on bootup?
Timing is about right for the FlashBack attack.
Disable Java in your Browser settings, not JavaScript.
http://support.apple.com/kb/HT5241?viewlocale=en_US
http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=142064
http://support.mozilla.org/en-US/kb/How%20to%20turn%20off%20Java%20applets
Flashback - Detect and remove the uprising Mac OS X Trojan...
http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
/Library/Little Snitch
/Developer/Applications/Xcode.app/Contents/MacOS/Xcode
/Applications/VirusBarrier X6.app
/Applications/iAntiVirus/iAntiVirus.app
/Applications/avast!.app
/Applications/ClamXav.app
/Applications/HTTPScoop.app
/Applications/Packet Peeper.app
If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
The most current flashback removal instructions are F-Secure's Trojan-Downloader:OSX/Flashback.K.
https://www.securelist.com/en/blog/208193454/Flashfake_Removal_Tool_and_online_c hecking_site
More bad news...
https://www.securelist.com/en/blog/208193467/SabPub_Mac_OS_X_Backdoor_Java_Explo its_Targeted_Attacks_and_Possible_APT_link

Regarding the article: iTunes Store: Troubleshooting iTunes Match: in my mac iTunes, i don't have a menu option 'view view options'. i do have 'view show view options'. but the resulting popup is different. is this article out of date?

regarding the article: iTunes Store: Troubleshooting iTunes Match: in my mac iTunes, i don't have a menu option 'view > view options'. i do have 'view > show view options'. but the resulting popup is different. is this article out of date?
i am troubleshooting iTunes match because it has been days since i uploaded music to mac iTunes and it still has the iCloud status icon for 'waiting'.

Is there really nobody else with this problem? Really?

Will an imessage show as 'delivered' if the recipients battery is dead??

While using the imessage text feature on the iphone 4, will an imessage show as 'delivered' if the recipients battery is dead at the time the message was sent?

It should not, no. It should revert to sending it as SMS if it's unable to deliver. Keep in mind that if the recipient has more than one iDevice activated with the same ID, it may be delivered to one and not the other. In that case, it will show as delivered. (For example, I have an iPhone and an iPad. If the iPhone is off and the iPad is on and connected to a network the message would be delivered to my iPad and show a status of delivered to you, even if the iPad is at home and I'm not.)

TS1843 i am using iphone 4 ios 6.1.3, after hotmail imap setup, error showing "CANNOT GET MAIL" tHE CONNECTION TO THE SERVER FAILED. its happening since 14 aug. plz help !

i am using iphone 4 ios 6.1.3, after hotmail imap setup, error showing "CANNOT GET MAIL" tHE CONNECTION TO THE SERVER FAILED. its happening since 14 aug. plz help !

I have trouble with sending e-mail and syncing e-mail. Try changing to 1 day sync under settings. It's sluggish but it works for me until they resolve the issue. MS claims all is normal. If you still have a problem you should report it here: https://status.live.com/report/hotmail

HT201272 I purchased songs from iTunes Radio on my iPhone, but now the only place they will show up is in the iTunes Store app on my phone, even after syncing to my computer a million times, the songs do not show up in my library or anywhere else.

I purchased songs from iTunes Radio on my iPhone, but now the only place they will show up is in the iTunes Store app on my phone, even after syncing to my computer a million times, the songs do not show up in my library or anywhere else. My phone is not syncing properly, I wanted to add another playlist to it that I created on my Mac. I pluged in my phone and made sure the playlist I wanted to add was checked to be on my phone when I synced.
The playlist I wanted to add was "Country." It is clearly checked. I also wanted to add the "Recently Added" playlist, which I also checked before sycing. Currently, my phone only has the "Purchased" playlist and my "All Songs" playlist on it. When I hit sync, iTunes added another playlist automatically added another playlist to the list above and checked it. It was titled "ALL SONGS 1" and had ten fewer songs in it than the playlist I had created, "ALL SONGS" had. This playlist, however does not show up on my phone after syncing, nor does "Country" or "Recently Added." (Every time I sync, another playlist is created as "ALL SONGS 2, 3, 4, etc.") One of the songs (I have not, yet checked the other songs) that I purchased from within iTunes Radio shows up in the "ALL SONGS 1" on this screen:
But does not show up anywhere else. This playlist does not show up anywhere but the two screens above. The ALL SONGS 1 or 2 playlists do not show up here:
When I search for those song in my library, it shows that I do not have them:
But if I go to the iTunes store, I get the play button and not the price of the song:
This is what things look like from my phone's side of things:
"Summertime Sadness," one of the songs I bought from iTunes Radio, does not show up in the iTunes store under purchased "All" or "Not on This iPhone"
But, it does show up under "Recent Purchases"
Also, this is what playlists are on my phone after syncing a million times:
Only what was on there before I started any of this. "Summertime Sadness" and the other songs I bought from inside iTunes Radio, do not show up in either of these playlists. Please, help me.

Hi Petrafin,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
You can download your purchases directly to your computer.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
Cheers,
- Judy

Zpool status in a zone shows zpool on which the zone is built

Similar Messages

Maybe you are looking for