ACROBAT XI - DOES NOT WORK WITH WINDOWS VISTA

WHY DOESN'T THE COMPANY STATE ACROBAT XI PRO DOES NOT WORK WITH WINDOWS VISTA.
THE COMPANY NEEDS TO WARN PEOPLE.  THE ACROBAT TECH SUPPORT FINALLY FIGURED OUT THAT IT'S NOT COMPATIBLE WITH WINDOWS VISTA.

The Acrobat website and the box lists the compatible OSs. You want Adobe to list all of the incompatible OSs---going back how far.
Acrobat XI Pro system requirements
These system requirements are for Adobe® Acrobat® XI Pro software, v11.0. Because system requirements change with each software update, refer to the Release Notes for your software version for the latest information on supported operating systems and browsers.
Windows
1.3GHz or faster processor
Microsoft® Windows® XP with Service Pack 3 for 32 bit or Service Pack 2 for 64 bit; Windows Server® 2003 R2 (32 bit and 64 bit); Windows Server 2008 or 2008 R2 (32 bit and 64 bit); Windows 7 (32 bit and 64 bit); or Windows 8 (32 bit and 64 bit)
512MB of RAM (1GB recommended)
1.85GB of available hard-disk space
1024x768 screen resolution
DVD-ROM drive
Internet Explorer 7, 8, 9, or 10; Firefox Extended Support Release; or Chrome
Video hardware acceleration (optional)
Note: For 64-bit versions of Windows Server 2003 R2 and Windows XP (with Service Pack 2), Microsoft Update KB930627 is required.

Similar Messages

  • Better privecy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers?

    Question
    better privacy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers? edit
    Details

    As a temporary workaround, I believe this Adobe management page allows you to clear your "Flash cookies": [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html Adobe - Flash Player : Settings Manager - Website Storage Settings panel] (hosted on macromedia.com -- Macromedia was the original developer of Flash).
    Regarding the script error, if I'm reading the script correctly, it is related to accessing your Flash cookies directory. It seems the publisher's support forum is not currently available for searching, but that might be a good next step.
    In the meantime, could you check whether the script has the correct location for your Flash cookies directory? If you can't access Tool > BetterPrivacy, you could check here:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''bpr''' and pause while the list is filtered
    (3) There should be a bolded setting named '''extensions.bprivacy.DataDir''' which looks approximately like the following:
    C:\Users\''yourWindowsUsername''\AppData\Roaming\Macromedia
    Do you have a similar value? If you paste the path used by BetterPrivacy into a Windows Explorer window, does it open? Also, click a couple levels in the folder, can you see:
    Flash Player \ #SharedObjects
    If the value is wrong, right-click the wrong value and choose Reset. BetterPrivacy should update the value the next time you try to access it.
    If the value is blank, you could try inserting a sensible value and see whether that helps.
    Any luck?

  • ITunes does not work with Windows VISTA

    If you are planning on installing Windows VISTA than do not expect your iTunes to work. It will mark all our downloads as being unauthorized to play on the Windows VISTA computer. If you try to download some new songs you will get an error. I am working with version 7.0.2 - the newest version at this time. So, beware - do not expect iTunes to work with Windows VISTA.

    If you are planning on installing Windows VISTA than
    do not expect your iTunes to work. It will mark all
    our downloads as being unauthorized to play on the
    Windows VISTA computer. If you try to download some
    new songs you will get an error. I am working with
    version 7.0.2 - the newest version at this time.
    So, beware - do not expect iTunes to work with
    Windows VISTA.
    Have you had any luck with Vista and iTunes? I have the exact same problem you had. Any info would be greatly appreciated! [email protected]
    Dell   Other OS   Microsoft Vista

  • Satellite Pro A200 - Fn keys does not work with Windows Vista

    Hello,
    I own a Satellite Pro A200-PSAE7E and a retail license for Windows Vista Ultimate 32bit (with SP1) installed on it.
    Before installing Vista, I upgraded the BIOS to the most recent version available on the Toshiba site ([http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT]).
    BIOS version is now 2.20-WIN32 contained in this file: [http://support.toshiba-tro.de/tedd-files2/0/bios-20080404121735.zip]
    After the successful installation of the operating system, I installed the "Value Added Package" ([http://support1.toshiba-tro.de/tedd-files2/0/vap-20080109135106.zip]) which contains the "Flash Cards Utility". In my understanding, the installation of the "Value Added Package" should enable the Fn keys usage.
    This doesn't seem to be true or not completely true.
    Here is what happens.
    - Before the installation of the "Value Added Package" all the Fn keys didn't work.
    - After the installation of the "Value Added Package", if the TCrdMain.exe process is running, all the Fn keys don't work.
    - If I remove the TCrdMain.exe from the startup and I reboot the PC, only some Fn keys work (Fn+ESC, Fn+F1).
    There is no way (or I didn't find a way) to make all the Fn keys working.
    Does anybody know how to solve this problem?
    Thanx in advance,
    mme000

    I do not know for sure but it can be because of SP1. I have installed Vista Ultimate on A200 and all listed stuff (drivers, tools and utilities) from Toshiba support page.
    Does your installations Vista DVD contains SP1 or you have installed it on your own? If you install Vista Ultimate (without SP1) and all stuff from Toshiba support site following Installations Instructions order.

  • Wow...Iphone does not work with Windows Vista 64 bit

    Preamble: Please spare me the bitchy comments about my being an idiot for using a PC. I give Steve plenty of money with 4 purchased Ipods, accesories, and a behemoth Itunes account. PC is fine for me and I like to spread the love.
    Sooo, here it is...
    Incredible, and I can't believe the media has not caught onto this yet as this problem must be the biggest complaint to date. Apple support has confirmed that they are now (after getting thousands of calls this weekend) realizing that even they were caught off guard in the iphone not being compatible with Vista 64bit. As the majority (from what I have seen - with the exception of cheaper line Dells)of PC's shipping over the past few months have the 64 bit version installed this may be a huge blunder on Apple's part. I purchased two phones and spent the weekend uninstalling and reinstalling itunes (per the error message and the instructions of support) before it was realized by Sunday that it doesn't work. Updates? The one person at apple support told me it could be weeks. Back to the store for a return and an argument over the 10% restocking fee.

    Actually OS X has a larger population of users (over
    Vista but not WinXP) if you look at
    licensed/registered accounts. Various browser sites
    that log OS type hits would also bare out this
    information. Not many folks have adopted Vista over
    WinXP, and even fewer have installed 64bit version of
    Vista due to lack of driver support and compatibility
    with existing Windows based applications/games.
    Having said that, get a Mac and install Boot Camp to
    run WinXP or Vista and also get fully integrated
    iPhone support with your Mac.
    Look up the actual sales numbers for Vista, think
    you'll be surprised -- your actually the minority not
    the majority.
    Vista sales are well below expectation -- Microsoft's
    stock is taking a beating while Apple's stock is
    taking off. But to solve your issues, I suggest you
    run the Windows version of iPhone software in 32bit
    compatibility mode -- this should solve it.
    Rob.
    To say that there are more OS X users than Vista is false. That's what you believe and want everyone else to believe.
    I agree it has problems but like the iPhone they will be addressed.

  • ITunes 12.1.1 does NOT work with Windows - Fix??

    Hi everyone,
    I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
    After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
    iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

    The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly.  Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components.  It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version.  I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

  • HP Deskjet 2540 scan does not work with windows 10

    my HP Deskjet 2540 scan does not work with windows 10, however, it still does eprinting. i need the solution and i haven't got it.  

    OK, More information.   Installed Media Portal 1.  This works with the tuner card without additional modification, so this appears to be some kind of issue with the software.  Media Portal 1 does install a different version of Direct X, I don't know if that could have anything to do with it, but HP MediaSmart Live TV still comes up with the same error and will not run.

  • Secondary display does not work with Windows...

    Ive been using a samsung syncmaster 920nw as my secondary display for the past few months. It works fine while running OS but when I switch over to Windows XP the display goes blank after startup. I have installed the proper drive and updated it whenever possible, but with no effect. I have tried to follow the troubleshooting prompts and pretty much everything else I could think of. Im out of ideas. I didnt buy the monitor to sit on my desk and take up space... Any help would be greatly appreciated.

    Still no luck... Has anyone else experienced this problem while running Windows through bootcamp? Is it possible there's a compatibility issue with XP vs. Vista? The display is new and bears the mark "Works with Windows Vista". Could that mean it wont work with XP? I obviously don't use Windows that often, but seeing as I purchased the monitor as a secondary display, it would be nice to be able to put it to use in Windows too. Thanks anybody...

  • Does iTunes work with windows Vista?

    I cannot get iTunes to install on my windows Vista desktop computer.  Does Windows Vista not work with iTunes?

    Vista is supported. What, if any, error messages do you get?
    tt2

  • Adobe bridge raw not working with windows vista in photoshop cc, why?

    adobe bridge raw not working in photoshop cc, is there a fix?

    Your sure your using photoshop cc on windows vista?
    I was under the impression that photoshop cc would not even install on windows vista.
    What version of camera raw do you have?
    In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
    (click on the words Camera Raw to see the version)
    Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
    What camera are the camera raw files from?
    Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista.

  • USB Ultranav keyboard does not work with Windows 7

    Hi, I recently installed Windows 7 to my Dell Latitude XT tablet and was disappointed to learn that my USB Ultranav Keyboard only works as a keyboard and not a 'mouse'; that is, the ultranav devices (touchpad, buttons, and trackpoint) do not work.  I have not had problems with the keyboard functioning in XP or Vista, so it was surprising to find that it will not work with W7.
    I thought all was going well when W7 recognized the Ultranav keyboard when I plugged-in the device, but all did not go as planned.  I let W7 find the drivers through Windows update, but then once they didn't prove to work, I followed W7's directions of reinstalling the drivers in its version of 'Compatability Mode', but that still didn't prove to work.  I would really appreciate any insights into this problem as it is one of my only (current) hesitancies about using W7.
    Thank you for your time and attention to my inquiry.
    Cheers,
    Tsugazi

    Hi, strangely enough, I got it to work.  Here's the what I did differently (for those with a similar problem):
    After installing W7, I plugged in my keyboard and let Windows find the drivers.  When this didn't provide functionality of the ultranav devices, I tried installing the Ultranav drivers, and when Windows said there was a compatability problem, I then opted to let Windows re-install the Ultranav driver.  Unfortunately, this didn't provide functionality either.
    Jump ahead 12 hrs and re-install of W7 (for other reasons).  This time out, I installed the Ultranav driver, THEN plugged in my keyboard.  Everything works now!  I don't know that this sequence will work for everyone, but it did for me.
    Thanks for your comments.
    Cheers,
    tsugazi

  • Does FireFox work with Windows Vista?

    Question is not about the machine I'm using right now - so I haven't opened the "troubleshooting" window. The question is regarding my wife's old Vaio laptop with Windows Vista OS. It browses very slowly. We may want to use FireFox and possibly speed browsing. Uses Chrome now and will want to migrate tabs and favorites (etc).
    Is this possible and might it make the system a little faster?

    Hi,
    Seems like your slowness issues may caused by malware. Do a malware check with some malware scanning programs on the Windows computer.<br>
    Please scan with all programs because each program detects different malware.<br>
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
    All of your bookmarks will be transferred over during the initial launch of Firefox after installation.

  • HP Laserjet P1102 does not work with Windows 10

    I have just upgraded from Windows 7 to Windows 10 and whilst my Canon MG6150 works with Windows 10, the other printer HP Laserjet P1102 does not. Looking at the HP website it seems that the Windows 10 drivers for this printer are not yet available. Is there any way I can use the printer without the dedicated drivers? I have been told I should try to roll back but the printer is not recognised in device manager. Please help!

    Manual, Please let me know the outcome.

  • WebCam Vista not working with Windows Vista

    Dear All,
    Pls help me, I have a new laptop with Windows Vista Home Premium, but i bought a Creative WebCam Vista (one with 3 legs and round cam-head)i think i found the right software, but the installation is not completed giving error message, and its not allowing to compelete the installation, Anyone from this forum or from creative team, please help me,
    Thank you,
    dixondubai

    Please,  run the DirectX diagnostics tool. Go to Windows Start  and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

  • Wireless keyboard and mighty mouse do not work with windows Vista

    I have a new iMac core 2 duo 20" used by my granddaughter.
    The drive has been partitioned using 50-50 with Boot Camp Assistant to form 2 250 GB partitions and windows Vista has been installed on one of them. The installation process runs smoothly as does the process when the OSX disc is installed for the relevant drivers for keyboard, mouse, isight camera etc. At the end of this process it is necessary to click a :"finish" button but at this point the mouse and keyboard have frozen and there is no other way of inputting information. Restarting in windows takes me to the log in page but there is no way to input the user name and proceed further.
    Apple support has suggested hat I use a wired keyboard and mouse or call Microsoft support. Microsoft support have told me that they do not support Vista on a Mac.
    Any suggestions would be helpful.

    I had the same problem on the mac mini from my dad with windows XP.
    I could install everything smoothly but when i wanted to connect the mighty mouse and a wireles apple keyboard i had the same problem.
    I fixed this by using a mouse with cable and then add the keyboard and mouse via bluetooth in the configurationscreen. i had to do do this 6 times (the same thing) before it worked so maybe its the same in vista

Maybe you are looking for

  • How can I tell if my cluster is working?

    This seems like a question I should know the answer to, but I set up a quickcluster and can't tell if both machines are actually processing the job or if only one machine is. In the old version of compressor, I had qmaster in the bar which turned gre

  • Calling a servlet from XSQL

    Has anyone successfully called a servlet from xsql? If you have, have you called one from the href in the xsl:stylesheet? null

  • Problem on Multi based queries

    Hi,gurus,    I have two DSO(BI 7.0), ZDSO1 and ZDSO2, in ZDSO1, there are three characteristics ZCH01, ZCH02, ZCH03 and one key figure ZKF01, the key is ZCH01, while in ZDSO2, there are three characteristics ZCH01, ZCH04, ZCH05 and one key figure ZKF

  • Condition records  not generated in CRM from ECC

    Hi all, I have downloaded objects DNL_CUST_CNDALL, DNL_CUST_CND , DNL_CUST_PRC, from ECC to CRM successfully. I got all the condition types, access sequence and tables.including CUSXXX tables. I have also got few condition records for condition types

  • How do I stream music wirelessly from my NAS to my iPad?

    Hi, I've recently set my Dlink DNS 320 NAS with iTunes server. I've installed the latest iTunes and plugged my iPad into my desktop pc. I can see my NAS in the left hand pane of my iTunes window, and all of my music is listed there. When I unplug my