Add a new type of object links (transaction CV02N) - by material group .

Hi experts .
How can I create an additional screen for new tab by material group
       in DMS System ?
I have a requirement : 1. Add a new type of object links in transaction CV02N
                                      by material group(V023-MATKL) .
                                    Today we use 2 existing options : by Equipment and material .
                                  2. Save and display data .
We did the following steps :
1 . In customizing for Document Management :
               a. Maintained a key fields :
                      table : V023 , tran.code : OMSF , field name : MATKL .
               b. Maintained screen object link for V023 .
                     Our problem is screen number . we used at existing screen - 500 for user exit.
                     So we get a new tab with material instead of material group .
                     How I can create a new screen with field material group
                         for set this screen number in step b ?
                     May be I need the access key for FUNCTION GROUP CV130
                     and create this screen by myself ? .
               c. Defined Object links for special document type .
2 .   Created in se19 at implementation of DOCUMENT_OBJ
                      with defined filter : V023 .
                      Regards Helena .

Hi Nuno,
how did you solve this problem?
tks

Similar Messages

New Object Types for Object Links

Need to create new Object type to object link Product hierarchy from ECC to RPM Item. Field is PRDHA.
Do we need to create new structure to have the Key linking PRDHA.
Any suggestions?

Hi,
For this, you need to create Key, Proxy class and search field.
Logically if you use same Proxy class and key as that of PO then the system will search for PO number rather than PR.
I hope you are clear now.
Take help of an ABAPer
Niranjan
Let me know if it helps !!!

How to add a new column in a standard transaction mb5b

Hi,
In t-code mb5b, there are columns which describe the material description, material , opening stock , opening value, etc. I have to add a column with the field name "opening rate". Values for opening rate are calculated using the formula
opening rate = opening value / opening stock.Please help.

Hi
if you want to add a new Column in the Standard transaction you need to create a copy of program RM07MLBD. Add your field in the end of STYPE_BELEGE, Populate the text for field in FieldCat and in the end Populate the value by doing calculation on each row and modifying the table.
Rajnesh

How to add a New Tab in Business Partner Transaction

Hi Friends,
Please help me out to "How to add a new Tab in Business Partner Transaction?
Regards,
Ricky

Hi Rajendra,
It will be gratefull to have some EEWB docuement.Can you please forward me ?
Regards,
Ricky
Edited by: Ricky Maheshwari on Dec 21, 2009 6:51 PM

Customized tabstip for CV01N in Object link tab like customer ,material

Hi Friends,
Can anybody help me out in Customizing Object Links tab for Transaction CV01N.
I want to know exactly how could we add a customized tabstip in object link other than SAP Standards like Material Master, WBS element and etc.
I want to know whether do we have any SAP Note or any Badi to get the tab strip in Object Link tab.
Thanks in advance.
Satish Raju

Hey,
Material master is standard object to link to
Go to IMG ->Cross-Application Components->Document Management->Control Data->Define Document Types
choose the document type and double click at Define object links and "New Entries"
and enter
Document Type: Your document type
Object: MARA
Screen no.: 201
When New Version: Decide what you want
Create Document: Decide what you want
Document Version:Decide what you want
BR/Håkan

Need to add a new View With ITS Link in it

Hello All ,
I am Working on SAP CRM 7.0 in Marketing here in marketing We do have an Account Work Center here in account we have three views Search , Create and Report .I want to add a new view with name "XYZ" in this view i want have Logical links . This logical link is ITS (Transaction Launcher ). Can any one Tell me the Procedure for this . Thanks in Advance
regards,
KiranPosanapalli

Solved by myself

Gererating new tabs for object links

hi ,
can i add my own tab in the object links for any document number?
this new object which i add is not in the sap list of objects.
how this can be done with out going for screen exits and BADI.
Please giv me some options for handlinh this scenario.
Raghu

hi,
if u want to add new object to list , then u need following configuration
1. Define screen fields
2. MAintain screen for object link
Initially u can take any standard scrren and ask ur abaper to develop new screen for newly added object.
Regards
Sham

Authorization object (pfcg transaction) x funds center group

Hi,
I would like to know how i can by u201Cauthorization objectu201D in PFCG transaction to allow that some user can access the funds center group (created in FM_SETS_FICTR1 transaction). Is there u201Cauthorization objectu201D to funds center group ?
On the other hand, I need that one user access just all Funds Centers of the especific funds center group using u201Cauthorization objectu201D.
Kind regards in advance.
Claudio

Hi Mauri,
the transaction SU24 for FM_SETS_FICTR1 transaction just show the object F_FICA_FCG and this object only open the fields: FM_AUTHACT and FM_FIKRS for this object.
I solved the this problem applying the Alex´s idea bellow:
Hi, if Fund centers from FC groups doesn't across (i mean that one FC can include just to one FC group), then you can upload FC from groups and maintain Auth group via LSMW.
Ex. maintain for all FC from FC group BQ000020 auth. group=BQ02 etc
thanks a lot
Claudio

Authorization Object (pfcg transaction) versus Funds center group

Hi,
I would like to know how i can by u201Cauthorization objectu201D in PFCG transaction to allow that some user can access the funds center group (created in FM_SETS_FICTR1 transaction). Is there u201Cauthorization objectu201D to funds center group ?
On the other hand, I need that one user access just all Funds Centers of the especific funds center group using u201Cauthorization objectu201D.
Kind regards in advance.
Claudio

Hi Alex,
Your ideia is good, but unfortunaly my Funds center doesn´t have its code starting with the same character. Ex..._BQ000020 is a Funds center group_ of Funds center ET000030, BF000043 and CJ000031.
thanks a lot
Claudio

Customization of Object Link of Transaction CV01N

Hi All
   Can anybody help me out in Customizing Object Link of Transaction CV01N.
I want to know exactly how could we add a customized tabstip in object link other than SAP Standards like Equipment Master and Material Master.
How could i link these to R/3 transactions like MB03, FB03, CJ20N etc....
When i save these documents it should get generated and saved to the document data of the respective transactions.
Thanks
Raja

hi,
You can also link documents with SAP objects for which no linking is supported in the standard SAP System.
In Customizing for the Document Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data  Maintain key fields.
1.     Program two screens for the following module pools for the SAP object that is to be linked additionally:
u2013 SAPLCV00
u2013 SAPLCVIN
The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
2.     Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
After you have completed the above, documents can be linked with the SAP object that you have added. You define the settings for this in Customizing for the Document Management System (see: Object Links).
regards, benakarajes

Adding object links to Document types

I tried adding the following object links to a document type
1. STKO_DOC BOM header   258
2. STPO           BOM              266
3. STPO_DPC   BOM item      259
After adding when i create a DIR against this doc type, the object link tab for all these above object links are greyedout. Its not accepting any user input for these object links. Can anybody suggest me a solution?
Edited by: sujatha sirobhushanam on Jan 19, 2009 7:52 AM

Hi,
you can add points to a post with the radio buttons on the left hand side at each post. On the left side of a reply you can see the following information:
bhupendra SINGH
Posts: 14
Registered: 5/20/08
Forum Points: 0
Solved problem (10)
Very helpful answer (6)
Helpful answer (2)
Beside the last three lines there is a radio button and this needs to be flag to provide points.
Best regards,
Christoph
P.S.: You don't need to write 'Sir' here in the DMS forum.

Object Link to Batch Number (MCH1 & MCHA)

I am trying to link a DIR to Batch Number.
For this i tried object MCH1(Batch Number without Plant) & MCHA (Batch Number with Plant).Screen Numbers for MCH1 is 264 & for MCHA is 265.
After making the reqd. configurations, ie. defining object links for Document Type as MCHA & MCH1 when i go to transaction CV01N i can see the tab for MCH1(screen number 1264) and no tab is available for MCHA(1265).
And when i go for CV04N, and try to search for same document type with the help of object links then both tabs are visible there. But now in these tabs material column is not visible, only Batch column is visible for MCH1 and Batch & Plant column are visible for MCHA. I have already checked the Table settings - there is nothing wrong with it.
Please guide me why such problem is occurring instead of maintaining all configuration properly. Is there anything that i have missed?
Points for helpful answers.

Hi Christoph,
Thank you for quick response.
Looks like I was not clear in my query.
What I have done is as following:
1.Maintain Screen for Object Link: Here I maintained the objects MCH1 & MCHA with screen numbers 264 & 265 respectively. And also maintained value 1 for Authorization.
2.Define Document Type >> Define Object Link: Then I have assigned these 2 objects to the particular Document Type with DC10 along with respective screens.
Now when I go to CV01N and go to object links I can see only 1 tab which contains Material & Batch which I guess is visible because of MCH1 (Screen number 264).
But I am not able to see the other tab which should contain Material, Batch & Plant as defined in the screen 265 for object MCHA.
Second problem is when I go to CV04N, and enter the Document Type and go to object link tab, I can see 2 tabs. But one of these tabs has Batch & Plant Column and the other tab has only Batch column.
Please help me out with this. Thank you.

Cprojects and object links to other project phases

Hi experts,
Have anyone of you some ideas how to creating a object link to another phase in another project? Are there possibilites for enhancing the the type of objects link via a BAPI or something in cProjects 4.0?
Thanks, Camilla

Hi Camella,
You can try this in IMG activity
"Make Settings for the Linked SAP Objects". But you need to try copy an existing entry and change relevant tables parameters
I have done this for R/3 Transaction in cProjects 4.0 + ECC 6.0 and Iam sure it will work for Project Phase also
Pls,let me know the version you are trying this feature
regards,
Ramakrishna

Object Links fields grey for Production Order,BOM header,BOm item

Hello Friends,
1) In DMS Object links tab ,for objects BOM header,BOM item,Production order fields are grey even though necessary settings are done. Is this standard or I am missing some config.
I did the similar settings for other objects like material master,vendor master,claim etc and I am able to assign these objects in Object links tab.
2) In Production order I can assign the existing document but can't create document from Production order.I maintain value 1 in img Maintain screen for object link --> Auth.
Define doc type --> Define object links --> create document = 2 ( Use Transaction to Create Document)
I can create a document from other objects like Material Master,Claim,PO,PR with similar settings.
Kindly help me in this regard
Regards
Abhijit A. Pachgade

As u right said this is a standard.
generally a document can be attched from the function T-code or from the DMS T-code cvo1n, through the object link tab page. * BOTH WAYS POSSIBLE*
but for BOM, production order it is only one way, u can attach at the function T-code level like co01....ect ONLY ONE WAY
especially for PP transation, its one way
REGARDS
SURYA

TypeSafe Enums + readResolve + New Types

I have the following code:
public final class Type implements java.io.Serializable {
    public static final Type TYPEA= new Type ("TYPEA");
    public static final Type TYPEB= new Type ("TYPEB");
    public static final Type TYPEC= new Type ("TYPEC");
    public static final Type TYPED= new Type ("TYPED");
    private String type;
    public Type (String type) {
        this.type = type;
    public String toString() {
        return this.type;
    private static int nextOrdinal = 0;
    private final int ordinal = nextOrdinal++;
    private static final Type [] VALUES = { TYPEA, TYPEB, TYPEC, TYPED};
    Object readResolve() throws ObjectStreamException {
         return VALUES[ordinal];
}My problem is that I want the user to be able to add a new type for example lets say TYPEF. how would I go about doing this and also make it work with serialiazable?

you can overcome the and .equals() failing with a very minor amount of code. Basically you need a set of all possible typesafe values.
Additionally you need to implement readResolve to prevent serialization from cloning.
Finally - it's just never a good idea to use == for equality comparison. It should only be used for identity comparison (and even then most of the time you should have equals perform the identity comparison).
    private static final Stooge[] ALL = new Stooge{Moe, Larry, Curly};
    //see java.io.Serializable for details
    protected Object readResolve() throws ObjectStreamException {
        return getTypeFor(this.name);
    //you usually need this for retrieval from persistent storage
    public static Stooge getTypeFor(String name){
      Stooge result = null;
      for(int i = 0; i < ALL.length; i++){
        if(ALL.name.equals(name)){
result = ALL[i];
break;
return result;

Add a new type of object links (transaction CV02N) - by material group .

Similar Messages

Maybe you are looking for