Adding custom field to BP Adress with AET

Hi experts.
I have to create several custom fields for the BP Adress, and when going through AET it proposes to create them in the BUT000 table, doesn't gives me another option.
As a BP is expected to have several addresses, this values can not be saved in BUT000, which we all know is where resides BP header data, and the BP number is primary key.
I'm not planning to need these fields in the webUI, they are only required for a massive initial load, and I'm using BAPI_BUPA_ADDRESS* function modules to update the address data.
Could you help me with your advice? Should I make an append structure to ADRC? How could that be reflected in the BAPIS structures I'm using to save the data?
Your help will be very appreciated my friends.
Cheers
Marc

HI Marc,
I hope you are right and will work aswell.
Also, i have another suggestion: instead of extending the BAPI, you can update the ADRC values outside of Bapi. meaning...once the BP is created/udated, you will get BP number, with the bp number, BUT020, gives you the address numbers, with the address numbers you can udpate ADRC through FM "addr_update" if it is for Org, "addr_person_update" for person, "addr_cont_pers_update" for contact person.
Hope this helps.
Cheers, Satish

Similar Messages

While adding custom field in urgent change-Create new field button in AET is not coming

Dear All,
we have requirement to add some custom fields in urgent change document. while adding custom fields using AET, create new field button is not coming.
Thanks in advance. points will be awarded.
Rahul

Hi Jignesh,
Thanks for your valueble inputs, it really helped me to understand the process.
I checked in Web UI configuration for urgent change document as you mentioned but still that button is not coming.
In transaction BSP_WD_CMPWB, i have created enh. set: Z_ENHANCEMENT_SET.
Can you tell what to selelect in application and page popup which comes after selecting Enhance component button. Actually i tried but i am not able to add new record in conf.
Thanks in advance.

CRM 7.0 / IS-U: adding custom fields to Business agreement for replication

Hello Experts!
We're working on replication of custom fields from IS-U to CRM 7.0.
Can you help me with clarification of my understanding of these questions..?
1) CRM/IS-U mapping tables for buag_main:
Business Agreement(BUAG_MAIN) is a BO in CRM that corresponds to CRM table CRMM_BUAG and to Contract account in IS-U table FKKVKP.
Table FKKVKP were enhanced with some z-fields,
so we are going to enhance corresponding CRM table CRMM_BUAG (or CRMM_BUAG_H) with that new fields..
But we see that these CRM and IS-U tables have far not the same field structures..
So, the question: Which crm and is-u tables i should look, enhance and replicate for Business agreement?
2) Access to Business agreement with possibility to add custom field:
I couldn't find in Web UI where i can directly edit profile of Business Agreement..
I've found just access to assignment block "Business agreement" on Account's profile overview page..(Role ServicePRO; Account details).
There I used AET to add custom field..but I faced with problem when the 1st popup appeared: there was no enhanced object "Business Agreement"..
Also in role "Utilities IC Agent" i've found "business agreement" profile but there I don't see buttons for adding custom fields..
So, the question is: Where I can access Business agreement profile to enhance it with custom fields for replication with IS-U?
3) CRM/IS-U data exchange functions:
I tend to use tcode CRMC_BUT_CALL_FU:
for CRM inbound event of BUAG object - FM CRM_BUAG_MWX_PROCESS_EXT_STRUC..(as template).
Question: Am I right that it fits my requirement to replicate custom fields from IS-U to CRM?
Please tell me if you need more information..
Looking forward to your answers.
Thank you a lot in advance!
Kind regards,
Evgenia

Hi Gobi,
Thank you for advice. But:
I've created fields not by using AET - I used documentation that Nicolas suggested me above.
I've enhanced tables and structures that were mentioned there with my z-fields for both sides (CRM and ERP).
Also I looked CRMC_BUT_CALL_FU for CRM Inbound BUAG_MAIN - corresponding standard FMs are marked for call.
Any ideas?
Thanks in advance.
BR,
Evgenia

Adding custom fields to table view assignment block

Hi All,
I want to add two news fields to 'Service Contract Item Level' in 'Object List' assignment block. How can i add these two custom fields to table view assignment block using AET. I have tried to add new fields using AET but there is no business object supports to my requirement.
Thanks & Regards
Nitish

Hi Nitish,
As naveen sadid use Cutomer_i object . I guess it will be more appropriate.
And following link will be helpful for AET creation.
CRM 7.0 How to --4 Adding Custom Fields With The New Application Enhancement Tool (AET)
Regards
Loks

Adding custom fields to Embedded Search

Hi All,
I have read the post [here|How to add custom fields to Embedded Search; about adding custom fields to Embedded Search. I am looking to add Employee Subgroup for use in Talent Management (specifically the STVN SuccessionPlanning component) and wanted to know if anyone can expand on the instructions in the link to add this field.
It appears to be part of the HRTMC_PERSON search object connector already and while I've done some IMG configuration the field is showing in SuccessionPlanning, but not displaying any data.
Additionally, I'd be interested in any tips to add information that is not from PA0002 should it be required in the future.
Many thanks,
Luke

Hi Luke,
I am assuming here that your search request fields are based on HRTCM_CENTRALPERSON search template. To enable your search to work on employee subgroup please do the following
1) Check if the HRTMC_PERSON Template extracts the data from Infotype 0001 via SPRO node 'Define Search Models and Change Pointer' Extraction Class is 'CL_HRTMC_SEARCH_READ_PA_INFTY'.
2) Via ESH_COCKPIT, goto Template Modeler and select your custom Software Component and press Edit. Goto roadmap step 5 - Define Requests - where all search request fields are defined. Its using these fields Talent search works.
3) Select the search request e.g. 'SAP_TALENT_NAKISA', it would then show list searchable attributes in below table. Using 'Add' button select path for PERSK so that it can searched.
It would look like this once selected
OBJID(REL_CP_P)->HRTMC_REL_CP_P_209.REL_CP_P(REL_CP)->HRTMC_PERSON.OBJID->HRTMC_PERSON.ORG_ASSIGNMENT
4) In step SPRO 'Define Search Requests and Search Field Names' , define Employee subgroup field with AliasSearchField = PERSK since thats what is defined in roadmap step 5.
Hope it helps!
Regards,
Ricky Shah

Adding custom fields through SE51

Hi All!
This is with regards to adding custom fields through Se51 to standard screens.I had added custom field KNVV-ZZKVGR6 to the screen.
After drawing the text and I/O buttons.When I activate I am getting an syntax error saying Field KNVV-ZZKVGR6 is defined differently in screen (ABAP/4 field,Dictionary field).
What does this mean.
Also if i activate with a SAP standard field instead of the custom it is getting activated.
But for both the ways I could not able to see the output on the actual transaction.Also the new drawings which i am drawing are in brown color(different form the existing one)
Please advise.
regards
Praneeth

hi Praneeth,
what is the program name,screen number you are trying to modify..,and after appending the field ZZKVGR6 to KNVV , now go to table and choose menu Utilities->Data base Utility-> now click on Activate and Adjust the Data base, then try to add the field.
and are you adding the field from Dictionary (i.e you have option Get From Dictionary in that give KNVV table name it will list the fields, choose zzkvgr6 from it, and place it in your screen.)
the exit which you are adding should be appropriate one
or else you won't get the desired results. what is the exit..
Regards
vijay

Adding custom fields to Article Master (MM41/MM42)

Hi ,
I have a requirement of adding custom fields to Basic data of Article creation in MM41 . I appended the fields to
MARA table using Append structure . I followed the steps given in note 44410 . But i am unable to find an EXIT/BADI
/ENHANCEMENT to populate the values of custom fields which get triggered during MM41/MM42 .
But the Exit EXIT_SAPLMGMU_001 gets triggered only during MM01/MM02 . Kindly guide me to solve this .
Thanks and Regards,
S.Sivakumar

Hi,
Business Requirement:
As per the client Business critical requirements, additional fields are
required in the Article Master. This is because the existing fields in
the Article master are not adequate to capture the data.
We have referred the SAP Note 925424 (Table MAW1) and 44410 (MARA) for
this.
Based on the above note 44410, we have added fields in MARA table,
since Manufacturing
activities are envisaged in future instead of proceeding with 925424.
Whether, MAW1 (925424) also to be considered?
Since this is very critical requirement from client, we cannot avoid
and do not have any
alternate solution.
These fields will be used in reports and pricing in sales &
distribution.
Apart from this, are there any other SAP notes to be referred?
Is there any restrictions there in length for fields to be used in MARA table .
By referring note 44410 , i added 20 fields in MARA table, in which some 4 fields are more than 40 characters .
All custom fields are updated in MM41 and MM42 .
Shall i proceed by this approach .Kindly guide me on this .
Thanks and Regards,
S.Sivakumar

Adding Custom Fields to XD99, XK99

Hi,
I have a requirement to add custom fields to Customer and Vendor master transaction which are mass maintained.
XD99 and XK99 are the transaction codes. I found notes on adding custom fields to mass maintain MM17, however did not find any solution as of now to add custom fields to XD99 and XK99.
If anyone has worked on it, kindly provide me details if there is any Badi/User exit/Enhancement point to achieve this.
Regards,
Sneha Soni.

This works well with standard fields, but check [Note 216596 - Include additional fields in mass maintenance|https://service.sap.com/sap/support/notes/216596] and [Note 414020 - MASS: Customer fields are not mass-maintainable|https://service.sap.com/sap/support/notes/414020]
Regards,
Raymond

Adding custom fields to shopping cart in SRM 7.0

Hi My dear Experts,
I am having big doubt also a lot of confussion as per my understanding regarding adding custom fields to SC.
I believe,
i) It can be achieved by configuration in spro with respect to Meta data frame.
i,e Configure field control->configure control for fields on Header/Item level
after that
configure customer fields->Define cistomer fields on Header/Item level.
ii) I also doubt fields can be added through Webdynpro enhancement of standard component.
Pls clarify my doubt with little detail which is the best way to achieve my requirement ??
Is Webdynpro Enhancement really needed ??

Hi ,
   Example for Adding fields in SC accounting Tab ...follow the below example
1. Add custom field ZZTESTACCT in   structure   INCL_EEW_PD_ACC_CSF by using append structure.
2. Spro ->Supplier Relationship Management u2192 SRM Server u2192 Cross application basic settings u2192 Extensions and field controls (personalization) u2192 Configure field control ->Configure Control for Fields of Substructures
then click on "Metadata for Fields of Substructures and Table-Like Enhancements"
add the below entry
Bus. Object Set Type : 31
Structure Field Name : ZZTESTACCT
Bus. Object Type       : BUS2121
Set Level                    : Item
Field Visible : Check box should be checked
Field Enable : check box should be checked
if you create the above entry then you can see ZZTESTACCT field in the accounting tab.
Second point :
WD_BADI_DOMODIFYVIEW is a Badi you can implement this badi for the WD component and View to handle the UI elements.
regards,
Devi

Adding custom fields to FPE1/2/3 transactions

Hi guys,
My first thread here on SDN!
I need to add custom fields (Document Locator Number - ZDLN, and Post Mark Date - ZPMD) from table DFKKOP to transactions FPE1/2/3 under ADDITIONAL DATA area while manually entering NEW BUSINESS PARTNER ITEM.
The transaction is not BDT enabled and does not have a screen exit. The user exit and BaDI dont seem helpful to me.
The screenshot below shows the user exits and BaDI for the transaction.
Link: [Exits|http://img440.imageshack.us/img440/9319/1123201061827pm.png]
What are my options to add fields to the transaction screen now?
Thanks!!

Hi,
Yea i got the functional guys to configure it. Was a unique issue!.....But I know how they did it.
You can add it through SPRO transaction. Go to the below mentioned path.
Go to SAP Reference IMG
Financial Accounting > Contract Accounts Receivable and Payable > Basic Functions > Posting and Documents > Document >
Screen Preparartions > Include Own Fields in Detail Screens.
Here you need to enter the details from FPE1 transaction screen.
Activity Documentation:
Include Own Fields in Detail Screens
In this activity you can, if you have added customer fields to the document structures, include these customer fields in the entry screens of the transaction for posting documents.
For the detail screens (business partner item and G/L account item) you can create a screen that contains your own fields. You must create this screen as a subscreen using the Screen Painter. In addition you have to create modules for the intialization and for data transfer (PBO and PAI).
Activities
If you have extended the document strutures to includes customer fields, and you need these fields in the entry screens for posting documents, you must create the screen using the Screen Painter.
Carry out this step to create the screen and the modules that go with it in the system. You do not have to activate these afterwards.
Further notes
Read the field help for each field in the table. This describes the exact procedure.

Adding custom fields to FD32

Hi All,
I need to add 4 new fields to "Status" screen of FD32 transaction. I cannot use the already existing standard fields so I need to add custom fields. I have searched the forum and found the following enhancement and BADI :
RFDRRANZ
FI_DUZI_ROUND_CML
I tried to implement them but did not achieve the results that I wanted.
There are so many forums on this topic but none of them had an actual solution.
Did any had success adding custom fields to FD32? If yes, could you please let me know the solution.
Thank You,
Sonali.

Hi,
Business Requirement:
As per the client Business critical requirements, additional fields are
required in the Article Master. This is because the existing fields in
the Article master are not adequate to capture the data.
We have referred the SAP Note 925424 (Table MAW1) and 44410 (MARA) for
this.
Based on the above note 44410, we have added fields in MARA table,
since Manufacturing
activities are envisaged in future instead of proceeding with 925424.
Whether, MAW1 (925424) also to be considered?
Since this is very critical requirement from client, we cannot avoid
and do not have any
alternate solution.
These fields will be used in reports and pricing in sales &
distribution.
Apart from this, are there any other SAP notes to be referred?
Is there any restrictions there in length for fields to be used in MARA table .
By referring note 44410 , i added 20 fields in MARA table, in which some 4 fields are more than 40 characters .
All custom fields are updated in MM41 and MM42 .
Shall i proceed by this approach .Kindly guide me on this .
Thanks and Regards,
S.Sivakumar

Screen Exit for adding custom fields in Additional Data tab in ME21N

I need a screen exit or whatever other method for adding custom fields to the additional data tab at header level.
I also need a similar exit for adding a filed at item level.
Thanks in advance
Martin

Hello,
1st find badi or exit and then create screen ...and assign the screen group and screen no for that implementation....some steps i can give u i did with SPRO tcode....
please check it for VA02
SPRO u2013 SAP Reference IMG --- Logistics General --- Basic partner u2013 customers -- Control u2013 Adaption of customers own masters data element u2013 prepare modification of customer free enhancement of customer master record
1)Screen group                                  description
        zs                                           creating badi      --- (save)
       click on (label tab pages) u2013 new entries
       number u2013 10 , function code u2013 zs10 , description u2013 func ---(save) u2013(back)
2)select (FM_CUSTOMER_ADD) u2013 copy
     Implementation name u2013 ZAS
     (desc u2013 impl for cust) u2013 (save)
    interfaceu2014(check_add_on_active) double click on it
3)the above screen appear -- write the code in it u2013 (save) --- (activate) u2013 (back) u2013 (save)
     -- (activate) u2013 (back)
   Business adds in customer sub screens
4)select (FM_CUSTOMER_ADD) u2013 copy
     Implementation name u2013 ZAS1
     (description -- cust) u2013 in attribute u2013 (give screen group name)
5)go to interfaces (GET_TAXI_SCREEN) double click on it
   (save) --- (activate)
6)(SAVE) --
    Goto SE38 -- CREATE PROGRAM WITH NAME (ZQW) type module pool
     Goto SE51 -- Prog : ZQW
       Screen : 200 (Create)
      Goto layout u2013 design the screen
7)save u2013 activate
   then goto transaction : va02
For User Exit's
goto to tcode->status->program name->double click on that,
then goto to-> attribute take the package name and
Goto SMOD tcode ->Utilities->give the package name and F8
then a list of exits will display for that tcode as well as that package.
u can check the table MODSAP
u can check the table MODACT
For BADI's,
1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
2)Goto to tcode->status->program name->double click on that program will display's
then press crtl+F then cl_exithandler
Thank u ,
santhosh

Adding Custom fields to SRM 5.0 & placing them in the portal (SC)

Hi,
I am having some trouble with adding custom fields to the SRM 5.0 portal Shopping Cart.
I know that in order to have the custom fields appear, you first need to add them to the INCL_EEW_PD_ITEM_CSF & INCL_EEW_PD_ITEM_CSF_SC tables.
However, how do you control where the fields appear in the SC portal? I know that BADI bbp_cuf_badi_2 exists, but it doesn't allow you to place the fields where you want them to appear. Can you use screen variants for custom fields?
Please help.
Thanks You.

Bump!

Adding custom fields to FPE1/2/3 transaction screen

Hi guys,
I need to add custom fields from table DFKKOP to transactions FPE1/2/3 under ADDITIONAL DATA area while manually entering NEW BUSINESS PARTNER ITEM.
The transaction is not BDT enabled and does not have a screen exit. The user exit and BaDI dont seem helpful to me.
The screenshot below shows the user exits and BaDI for the transaction.
Link: Exits
What are my options to add fields to the transaction screen now?
Please help out!

Hi,
Yea i got the functional guys to configure it. Was a unique issue!.....But I know how they did it.
You can add it through SPRO transaction. Go to the below mentioned path.
Go to SAP Reference IMG
Financial Accounting > Contract Accounts Receivable and Payable > Basic Functions > Posting and Documents > Document >
Screen Preparartions > Include Own Fields in Detail Screens.
Here you need to enter the details from FPE1 transaction screen.
Activity Documentation:
Include Own Fields in Detail Screens
In this activity you can, if you have added customer fields to the document structures, include these customer fields in the entry screens of the transaction for posting documents.
For the detail screens (business partner item and G/L account item) you can create a screen that contains your own fields. You must create this screen as a subscreen using the Screen Painter. In addition you have to create modules for the intialization and for data transfer (PBO and PAI).
Activities
If you have extended the document strutures to includes customer fields, and you need these fields in the entry screens for posting documents, you must create the screen using the Screen Painter.
Carry out this step to create the screen and the modules that go with it in the system. You do not have to activate these afterwards.
Further notes
Read the field help for each field in the table. This describes the exact procedure.

Adding Customer Fields to AS91 - Asset Management

Has anyone added customer fields to the AS91 transaction. I'm writing a conversion program to load legacy data and I would like to add more fields to the Origin tab. If I can't do that, then I would like to add another tab to the transaction. There is a CI_ANLU include which allows me to add the fields to the Asset Master Record, but there's not any screen exits to add those custom fields to the screen.
Thanks.
Linda

Do following.
1. Go to Transaction AOLA.Its a customising Transaction.
2. Create your own Layout for ex. ZSAP.
3. Go to tab page titles and make sure you have all tabs in place.
4. Select tab where you want to put.
6. Add a record in it.
5. Under Groups you will find your screen prefix with U.for example if screen number is 9001 then under group box you will find U9001.
Check Transaction AOLK. Where you have to assign layout to Asset Class.
That will display the User defined screens in that tab.
In SPRO following is the path.
SPRO->Financial accounting->Asset Accounting->Master Data->Screen Layout
Message was edited by: Deepak Bhalla

Adding custom field to BP Adress with AET

Similar Messages

Maybe you are looking for