AFP client "connection failed 32" issue solved
I'm making this post because of the difficulty I had in troubleshooting this AFP error and hope someone will benefit from my finding.
I have a client whose server was responding with "connection failed 32" whenever anyone tried to connect to shares on the attached XRaid. The AFP log indicated entries like this:
Login admin
No matching key: admin
After much searching for hints on the forums I couldn't find any solutions. Some postings I read mentioned that the AFP problem was related to SCSI boards on their server. Not having one on our server I went after the nearest such item, namely Firewire. I finally solved the problem by unmounting the bank of 4 Firewire backup drives.
Although I have no idea why the AFP problem is related to the backup drives, it turned out that once I ran Disk Utility to repair the FW drives and remounted them, AFP worked once again. DU found "Directory name locked" on two of the drives and repaired them.
G4 Xserve Mac OS X (10.4.8) XRaid and Firewire backup drives
Hi apta
No matching key: admin
This seems to indicate a Kerberos key transfer of some sort that has not been recognised or was out of sync. Probably nothing to do with the actual problem which you have fixed. But that is what the log seems to be indicating to me.
Just a thought thats all
Similar Messages
-
AFP client "connection failed 32" - 10.4.7 AD bound client & server
Please, can anyone help with this?
Two G5s, clean installed, one as 10.4.7 client, other as 10.4.7 server. Both machines bound to company's MS AD. AD machine logins fine. AD lookups etc all working fine. DNS Forward and Reverse on server fine. Nothing else installed on either machine, no settings meddled with. Bound to AD with default settings.
Problem: When client attempts to connect to AFP shared volume on the server, message "Connection failed 32" appears. On first attempt after client reboot to connect to the share, the credentials pane appears (Domain, blah...) then, after OKing, the dreaded "Connection failed 32" message appears. Subsequent attempts to connect during the same session misses out the creds pane and returns only the 32 error message. I've looked up Apple's error codes but 32 doesn't exist.
Any non-AD bound client on the same network can connect to the same share fine via AFP, even LDAP clients using their AD creds.
I'd just config all the clients for LDAP to get round this but there are several reasons why that's a no no (mostly company security policy). It's either get all Macs fully AD bound or take them off the network.
Kerberos is used. Is this problem related to that? Sorry but I'm not a Mac or Networking Guru so I don't know which logs etc. to look at. Any help at all would be most appreciated - can't begin to tell you the hassle this is causing.
It would be something to find anyone with the same problem at least.
Thanks.A development on this:
By setting the Authentication method (Server Admin, AFP, Settings, Access) to Standard, rather than Kerberos or Any, clients can now mount the share OK, and still using their AD user credentials rather than a server local account.
Not sure what the security implications for this method are. Or is that just a red herring anyway? As long as the users are authenticated against our AD (via Kerberos) I'm happy for now.
Now then, if only Apple's SMB server would allow our PC clients to connect to the Mac shares I'll be fully home and dry. Come on Apple, where is SMB signing? Thursby have it. And don't tell me I can just disable it on the MS AD servers - absolutely no chance of that in a corporate PC network. And please don't tell me I can use DAVE to do the SMB sharing - it handles the signing but slows down AFP access to a crawl when everyone logs in. -
JCo client connection Failed to create new JCO client connection
hi All
I am trying to create a new JCO destination ion CE7.1 webdynpro content Admin. but I am getting following error.
Exception while creating JCo client connection Failed to create new JCO client connection weter: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_ACCESS_DENIED: User is not in role LcrInstanceWriterLD at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.raiseExceptionOnError(SimpleResponseAnalyser.java:120) at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.getIResult(SimpleResponseAnalyser.java:53) at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:220) at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:148) at com.sap.lcr.api.cimclient.CIMOMClient.createInstanceImpl(CIMOMClient.java:669) at ......
SLD is Up and running
CIM data is imported
Solution tried :
1) As no role wtih name LcrInstanceWriterLD was existing in the server ,hence created a new role with same name and assigned the LCR related action . Assigned the role to the user through which we are creating JCOs.
But we still getting the same error.
regards
PoonamHi Poonam!
Got to dig in the past a bit, I remember Users being able to create SLD object have to have certain permissions set in the J2EE UME. Simple Admin rights do not suffer, if I recall right.
Unfortunately I cannot go further in detail because this issue has been solved by a long gone collegue of mine.
Good luck anyway!
Jürgen -
Exception while creating JCo client connection Failed to create
Hello all -
I am trying to create JCo metadata connections and I am getting the below error trace.
Exception while creating JCo client connection Failed to create new JCO client connection SAP_R3_HumanResources_Metadata: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to change password for key SAP_R3_HumanResources_Metadata in secure storage at com.sap.tc.webdynpro.serverimpl.wdc.sl.SecureStorageWrapper.changePassword(SecureStorageWrapper.java:149) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:299) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:265) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176) Caused by: com.sap.security.core.server.securestorage.exception.ObjectStorageException at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.storeObject(RemoteSecureStorageClientContextImpl.java:600) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SecureStorageWrapper.changePassword(SecureStorageWrapper.java:137) ... 33 more
Could anybody please suggest what is wrong with this creation?
Thanks much!!Hi Maria,
Please update the host and sevice file first then check the SLD test and SLD Data supplier in visual admin.
Also check and verify the data using in the Jco destination creation.
Hope it will helps
Regards
Arun Jaiswal -
hi,
i have a NAS which i setup to be connected with my macs.
the icon for this nas drive (AFP) is located on the left part of the finder under "shared". i want to enter in my name and password every time i connect to this drive but the log in screen won't show up. it just shows connection failed when i click on "connect as" button.
do you know what i need to do to have this log in screen to show? i've tried connect to server but if i do this way, i will have to connect to each folder one by one which i do not want to do.
thanks!Just got a 2011 Mac Mini, the cheap one, and downloaded the Server App.
My local tech support (my Nephew) was NOT happy about Lion Server.... wanted to UPGRADE to 10.6 To be honest, I can see why, it has so many bugs I was regretting the download of 10.7 server.
Being impatient and not wanting to go thru the hassle of changing OS's, I just started dinking around. Note, I'm just home user, I'm fairly tech saavy, fairly new to MAC, I know nothing about servers. We have to two MBPs and this new mini, that's it. I just wanted faster backups, fast storage for music and other stuff, and that's about it.
SOLUTION: From the Server App, I simply clicked Time Machine, turned it on, and told it what drive to use... BOOM, I'm done, that's it! All I had to do was point my MBP to that drive an starting the MBP TimeMachine. Its that easy. Wow, really!
OTHER THOUGHTS:
I have a 4TB WD RAID (2 TB RAID 1). Its Firewire 800, so reasonable fast, and literally 6X cheaper than the equivalent Thunderbolt Promise drive (take a hike). My only concern is the Server puts all the client Time Machines in one partition... Now I have to figure out how to resize it. It blows me away a "server" doesn't have tools to resize a partition. Guess I'll have to load iPartition.
I was using a the same drive on the USB port of the Airport extreme. It was DOG slow! But it worked and is probably the cheapest network time machine setup you can have. Now, for 650 more, I have 100Mb backups and a cool new toy to play with. I'm probably going to upgrade my switch to gigabit. Then I'll have braggin rights over any other house on the block. -
What should be done when client.connect() failed?
Hi guys,
I am using JCO to connect backend System. If client.connect() is called and for certain reason failed, what should I do to roll back the action so that the system keeps normal. I think client.disconnect is not the solution, because connect is not successful. I encountered this problem, and my portal is totally down, what should I do to avoid this situaltion?
My code is
try{
client.connect();
catch (JCO.Exception e){
//WHAT SHOULD BE DONE HERE?
System.exit(1);
Thanks in advance!
Regards,
LiyingHi,
Can you try this code.
class JCOConnector {
private JCO.Client mConnection = null;
// loginParams will settings for connection
public static boolean connect(Properties loginParams) {
boolean returnCode = false;
try {
mConnection = JCO.createClient(loginParams);
long timeBeforeConnecting = System.currentTimeMillis();
mConnection.connect();
long timeAfterConnection = System.currentTimeMillis();
returnCode = true;
} catch (Exception e) {
try {
disconnect();
} catch (Exception e2) {
throw new RuntimeException(e);
return returnCode;
* To Disconnect from the middleware.
public static boolean disconnect() {
boolean returnCode = false;
if (mConnection != null) { // if connection exists
try {
mConnection.disconnect(); // disconnect from the middleware
returnCode = true;
}catch (Exception e2) {
}finally {
mConnection = null;
}else{
returnCode = true;
return returnCode;
Regards,
Ashwani -
Outlook 2003 Client connections fail after a while, requiring reboot
I have Windows 2003 Server terminal servers in several sites, with Outlook 2003 as email clients. Server is Exchange 2010, located in my main site. The remote site terminal servers are connected through WAN links that are 5 Mbps connections,
with generally very low usage compared to capacity.
Outlook works properly for 2 - 3 days for the remote site users, but then, their connections start to drop, and they see "Outlook is trying to connect the the exchange server ..." systray messages, and they lose their email. Can't see their
inbox contents, though sometimes the tree gets populated. The only fix is to reboot the terminal server.
Similar terminal servers at the main site do not experience this.
The backstory is that I recently migrated users from Exchange2003 to Exchange2010. On exchange 2003 we never had this problem.
What is going on here?Hi,
From your description, I would like to clarify the following things:
1. Make sure that these problematic users use Microsoft Office Outlook 2003 Service Pack 2 or later version.
2. The default Exchange Server 2010 RTM configuration requires RPC encryption. However, Microsoft Office Outlook 2003 does not use RPC encryption by default. You need to update an existing Outlook 2003 profile manually so that it uses RPC encryption with
Exchange 2010.
For more information about it, here is a helpful KB for your reference.
Outlook connection issues with Exchange 2010 mailboxes because of the RPC encryption requirement
https://support.microsoft.com/kb/2006508?wa=wsignin1.0
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
FaultCode:Client.Error.MessageSend faultDetail:'Channel.Connect.Failed
Hello Everyone,
I'm kinda sure a lot of people have to deal with the same error, but I can't solve it using explainations given in other topics. So here it is :
I'm trying to create a Flex project on Adobe Flash Builder 4.0, using J2EE, BlazeDS and Tomcat6.0.
To have a good start, I want to try some basic interactions between java & flex. For that, I created a java class with a functions returning a String, witch is called when a button is clicked in my main panel :
remoting-config.xml
<?xml version="1.0" encoding="UTF-8"?>
<service id="remoting-service"
class="flex.messaging.services.RemotingService">
<adapters>
<adapter-definition id="java-object" class="flex.messaging.services.remoting.adapters.JavaAdapter" default="true"/>
</adapters>
<default-channels>
<channel ref="my-amf"/>
</default-channels>
<destination id="hello">
<properties>
<source>test.HelloWorld</source>
<scope>session</scope>
</properties>
</destination>
</service>
HelloWorld.java
package test;
public class HelloWord {
public String sayHello()
return "Hello from Java";
project.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="1000" minHeight="600">
<s:Button x="200" y="200" label="Button4" click="callHello(event)"/>
<fx:Declarations>
<s:RemoteObject id="roHello"
destination="hello"
fault="onFault('roHello',event)">
<s:method name="sayHello"
result="onResult(event)"
fault="onFault('roHello.sayHello',event)"/>
</s:RemoteObject>
</fx:Declarations>
<fx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.rpc.events.FaultEvent;
import mx.rpc.events.ResultEvent;
import mx.rpc.remoting.RemoteObject;
private function callHello(event:MouseEvent):void
roHello.sayHello() as String;
private function onResult(event : ResultEvent) : void
var retour:String;
retour = event.result as String;
//Alert.show(event.result.toString());
Alert.show("success::"+retour);
private function onFault(remoteObject : String, event : FaultEvent) : void
Alert.show(event.fault.message);
//Alert.show("fault");
]]>
</fx:Script>
</s:Application>
When I launch my application, the button is created. But as soon as I click on it, I got the following message :
faultCode:Client.Error.MessageSend faultString:'Echec de l'envoi' faultDetail:'Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Status 404: url: 'http://localhost:8080/WebContent/messagebroker/amf''
any idea how to solve it ?I've resolved my issue. Perhaps you are correct that my tokens were not resolving, but since you did not offer a way to fix that, I was still on my own. There was nothing helpful that I could find in the console or log.
I found this article, and after using his architecture (using an external config file to define the amf endpoint at runtime) I was able to connect to the back end. I was also looking for a good way to externalize information, so I recommend reading this article:
http://coenraets.org/blog/2009/03/externalizing-service-configuration-using-blazeds-and-lc ds/ -
Thin Client connection not failing over
I'm using the following thin client connection and the sessions do not failover. Test with SQLPLUS and the sessions do fail over. One difference I see between the two different connections is the thin connection has NONE for the failover_method and failover_type but the SQLPLUS connection show BASIC for failover_method and SELECT for failover_type.
Is there any issues with the thin client the version is 10.2.0.3
jdbc:oracle:thin:@(description=(address_list=(load_balance=YES)(address=(protocol=tcp)(host=crpu306-vip.wm.com)(port=1521))(address=(protocol=tcp)(host=crpu307-vip.wm.com)(port=1521)))(connect_data=(service_name=ocsqat02)(failover_mode=(type=select)(method=basic)(DELAY=5)(RETRIES=180))))You have to use (FAILOVER=on) as well on jdbc url.
http://download.oracle.com/docs/cd/B19306_01/network.102/b14212/advcfg.htm#sthref1292
Example: TAF with Connect-Time Failover and Client Load Balancing
Implement TAF with connect-time failover and client load balancing for multiple addresses. In the following example, Oracle Net connects randomly to one of the protocol addresses on sales1-server or sales2-server. If the instance fails after the connection, the TAF application fails over to the other node's listener, reserving any SELECT statements in progress.sales.us.acme.com=
(DESCRIPTION=
*(LOAD_BALANCE=on)*
*(FAILOVER=on)*
(ADDRESS=
(PROTOCOL=tcp)
(HOST=sales1-server)
(PORT=1521))
(ADDRESS=
(PROTOCOL=tcp)
(HOST=sales2-server)
(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=sales.us.acme.com)
*(FAILOVER_MODE=*
*(TYPE=select)*
*(METHOD=basic))))*
Example: TAF Retrying a Connection
TAF also provides the ability to automatically retry connecting if the first connection attempt fails with the RETRIES and DELAY parameters. In the following example, Oracle Net tries to reconnect to the listener on sales1-server. If the failover connection fails, Oracle Net waits 15 seconds before trying to reconnect again. Oracle Net attempts to reconnect up to 20 times.sales.us.acme.com=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=tcp)
(HOST=sales1-server)
(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=sales.us.acme.com)
*(FAILOVER_MODE=*
*(TYPE=select)*
*(METHOD=basic)*
*(RETRIES=20)*
*(DELAY=15))))* -
My office is setting up a new gateway server. I can connect to the old one just fine, but the new one is not allowing me to connect. I can connect from my Windows VM, but not my Mac Client.
This is the log:
2014-Nov-26 16:09:10] RDP (0): Final rdp configuration used: gatewayhostname:s:gat1.gibbscam.com
screen mode id:i:0
use multimon:i:0
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 16:09:10] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:10] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): correlation id: d8afdeb7-ce3a-ceff-a6e8-51a5d5b40000
[2014-Nov-26 16:09:10] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:15] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 16:09:15] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:15] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): correlation id: 3d81bcf6-8d0e-fba8-b75e-bd2a247c0000
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 305
User Message : HTTPEndpointException: 4, The non-proxy http connection failed to connect with the message: 404 Not
Found
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:16] RDP (0): ------ END ACTIVE CONNECTION ------
And here's a log for server that I can connect to:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used: gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 15:52:20] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:20] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:20] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): correlation id: 3bea4411-4b23-c197-9b52-63f948a10000
[2014-Nov-26 15:52:20] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:25] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:25] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 15:52:25] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:25] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:25] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:25] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:26] RDP (0): correlation id: 509122b5-d9b1-60f0-a0ac-b75a8dc20000
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Nov-26 15:52:28] RDP (0): Server supports RAIL
[2014-Nov-26 15:52:28] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Nov-26 15:52:29] RDP (0): Server hides cursor
[2014-Nov-26 15:52:31] RDP (0): Server shows cursor
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:35] RDP (0): ------ END ACTIVE CONNECTION ------
Any suggestions on what I can ask my IT department to change on the server so I can connect would be greatly appreciated.Hi Jeremy,
Thank you for posting in Windows Server Forum.
From the error and other description it seems that there is some misconfiguration with setup. You need to provide the FQDN name of the server as might server name is not resolving its name properly and so facing issue. As seems from below details:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used:gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
Configuration used and full address name both appears different so please verify configuration accordingly.
Please check the DNS record, check certificate whether it match FQDN name of the server with certificate name, also try to check to connect with IP address and see what result you can find.
You can follow below guide to configure RD Gateway and after that verify the result.
1. Deploying Remote Desktop Gateway RDS 2012
2. How To Work with RD Gateway in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support -
Remoting Connection Issue: Channel.Connect.Failed
Solution: Turns out my client had installed a new
firewall/web management system without telling me. My app was being
blocked. :(
Hi there,
I have a Flex app using remoting and ColdFusion. My client
has suddenly experienced the following error:
Channel.Connect.Failed
NetConnection.Call.BadVersion: url: '
http://mysite/flex2gateway/'
The weird thing is the app works when you access it from
outside of my client's office. I'm wondering if it is some sort of
firewall issue on their end. Any thoughts?
Thanks.The issue is probably do to a problem with your configuration. There is probably a destination or endpoint issue. A nice and short tutorial on this can be found at http://flexbandit.com/archives/55.
-
Exchange 2010 SP3 Rollup 8v2 causes client connectivity issues
I installed SP3 Rollup 8v2 this weekend, going from 7. Since then we are having random client connectivity issues. New profiles can't be created, and some users can't access resources when booking meetings. We can do a registry fix to their machines to add
a DS Server, but this is a workaround only. I have uninstalled the Rollup 8v2 and we are still having the issue.
I thought 8v2 was supposed to fix this issue!Hi,
According to your post, I understand that outlook client cannot connect to Exchange server to configure profile and cannot get list of resources room when upgrade to Exchange 2010 SP3 Rollup 8v2, the temporary solution is that specify the DC in registry.
If I misunderstand your concern, please do not hesitate to let me know.
Is there error message when configure Outlook failed?
Please run Test E-mail AutoConfiguration and Outlook connection status to double confirm the URL and FQDN of Exchange server.
As additional, please run below command to double check the state of Exchange system component:
Get-ServerComponentstate -Identity “servername”
If the state is Inactive, please run below command to active relevant component:
Set-ServerComponentState <Identity> -Component “component name” -Requester HealthAPI -State Active
More details about Server Component States in Exchange, for your reference:
http://blogs.technet.com/b/exchange/archive/2013/09/26/server-component-states-in-exchange-2013.aspx
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support -
10.4.11 Client connection issue to 10.6 server
I am moving from a 10.4 server to a 10.6 server. All the clients are 10.4.
General configuration is as follows:
- Home directories are on the server, shared via AFP.
- Setup a "Guest" computer configuration on the 10.6 server in workgroup manager
- DNS is successful for forward and reverse resolution
- Performed a bind of the client without authentication
- Kerberos is NOT enabled
- Able to authenticate successfully, but get the following message after authentication:
"You are unable to log in to user account "XXXXX" at this time.
Logging in to the account failed because an error occurred. THe home folder for the user account is located on an AFP or SMB server. Contact your system administrator for help."
I am able to successfully access the share using a local account on the client and authenticate against the user on the server.
No errors are showing in the AFP logs. No errors in the Open Directory logs that correspond to this.
Anything that can help for getting the clients connected to the new server (Mac Mini, connected to the network via ethernet)i have the same error with a 10.4 client
"Logging in to the account failed because an error occurred. THe home folder for the user account is located on an AFP or SMB server. Contact your system administrator for help."
anyone has a detailed how to to bind a 10.4 client to a 10.6 server ? 10.7, 10.6.and 10.5 clients working fine but the 10.4 client not :-(
this is for nfs:
asha:/pub /Network/Servers nfs resvport,net 0 0
daishar:/pub /Network/Servers nfs resvport,net 0 0
daishar:/home/rtomayko /Network/Servers nfs resvport,net 0 0
must i only change the "nfs" to "afp" ?
hope anyone can help me thx -
Suppress "Connection Failed" Error Messages on Client?
Hi there,
I have a Leopard server which is Managing Preferences for users in groups. In my Login Preference for a group, I have it basically "auto mounting" shares, such as smb://leopard-server/accounting and smb://leopard-server/graphics.
The works great so far. A user logs into their machine, managed prefs determines their group membership, and poof all the appropriate network drives show up on their desktop.
Problem is - when a user is off the network (for instance, at home with their laptop), after they power up and login they are immediately assailed with error messages, one for each failed connection to a network drive: "Connection failed. The server may not exist or it is not operational at this time".
Now it is understandable why Leopard is bringing up those error messages - it's trying it's best to connect to the network drive but the user isn't on the network.
Question is: is there any way to suppress these error messages and let the users who are off-network boot to their desktop "quietly"?
I know you can hold the Option key at login in order to turn off Managed Prefs altogether, but the problem with that is users tend to forget to turn Managed Prefs back on when they get back into the office.
Any ideas?It's not just you, I am seeing this behaviour too.
Where 10.4 clients would fail silently, 10.5 is throwing the "Connection Failed" error message as you described.
I agree it is confusing to end users and would like a way to supress it, the only thing that springs to mind is manually mounting the share via a login hook that first checks network availability rather than using a WGM configured mount. Trouble is, to mount an afp share with the users credentials via a script is a whole new problem in itself. -
IPhoto 8 & iMovie 8 give my mac a 'Connection Failed Error' then AFP error?
After installing iLife 08, both iPhoto & iMovie cause my mac to try to connect to an unconnected server/network/drive.
I get a Connection Failed The Server May not exist ... error, which eventually becomes an AFP error. Can I stop this? They both seem to be trying to connect/mount to a drive (that no files related to them are or have ever been stored on relating to previous iPhoto libraries.. any ideas)
Not impressed with this new set really... iWeb crashes instantly. Nice.I'm getting this too but only with iPhoto.
Before installing iLife '08 I moved my three iPhoto 6 libraries from my iMac G4 to my MacBook (via AirPort) as per the instructions in 'How to move the iPhoto Library folder to a new location'. I disconnected from my iMac and then launched iPhoto 6 on my MacBook to make sure each library was intact.
I installed iLife and successfully upgraded each library but now each time I launch iPhoto 7 my MacBook tries to connect to the original location of the libraries and, if the iMac is asleep, gives the AFP error Tim mentioned above. If I then quit and re-launch iPhoto I get "Caution: the iPhoto Library is locked, on a locked disk, or you do not have permission to make changes to it".
I can solve all this by making sure that my iMac is awake when I launch iPhoto but this is pointless if I'm out of AirPort range.
Grr.
Message was edited by: Timmargh to add clarity
Maybe you are looking for
-
How do i use the recovery disks to get my information back on to my computer
ygyhnrlhjsf;gh
-
CPU issues on MacBook (over 70%) - where is the problem?
Hello! This week, all of a sudden, my CPU percentages went up, approx. to 70%. And now it is running really slow. I have made an EtreCheck and can't really figure out, what is causing it. On my activity monitor, this particular program is called "Ink
-
I am trying to delete a page from a pdf using Acrobat X Pro but the delete option is greyed out. Why
I am trying to delete a page from a pdf using Acrobat X Pro but the delete option is greyed out. Does anyone know why?
-
I have a dark vertical line approximately one inch wide on my screen. I can't get rid of it. It's a banding of grey. Help!
-
IPod and Videos: How to Update and Play
My brother just got a new iPod. Upon synchronization the iPod was updated with his music but not his videos. Basically all of videos are movie trailers. What does it take for iTunes to take them into account when updating the iPod? And will any video