After Install of Office Pro 2013 Plus from downloaded iso file Outlook can't find any outlook.pst

Have just installed - apparently error-free - Office 2013Pro Plus. Can't open Outlook because it's missing the dataset C:\users\xyz...\documents\outlook-data\OUTLOOK.PST.
There is NO outlook.pst on the entire computer, in other words it seems that the install didn't create any.
An attempted "repair" in System control worked fine, but didn't handle the outlook.pst issue.
Any idea what to do? Many thanks and kind regards
Happy 2014!

Was this a fresh installation or a re-install / recovery, as on a fresh install there wouldn't already be a .pst configured until you'd done the initial account setup process and configured a mailbox. If it's a fresh install are you sure it's a legitimate
installation?
When you first start Outlook you should be presented with the account setup wizard, which then configures your first account and creates any required data files for your mailbox.
If that's already been done but isn't working, the simplest thing to try initially is to remove the configured profile(s) from Outlook and then start from fresh. Run "Mail (32-bit)" and on the window that appears click Show Profiles. Remove any and all profiles
listed on that screen, and then click OK. Now open Outlook again and since there's no profiles configured you should be taken to the initial setup wizard where you can configure the mailbox and the relevant files will be created.

Similar Messages

I need to do a clean install with Lion. How do I do this. I can't find any doc. to tell me the procedure.

I need to do a clean install with Lion. How do I do this. I can't find any doc. to tell me the procedure.

Follow the instructions at the link I posted
have a lot of old stuff transferred from Mac to Mac to Mac that is slowing down everything
If that included Power PC apps, read here > Lion upgrade questions and answers: Apple Support Communities

After downloading OS X I can't find any of my photos I had on my mac. How do I get them back?

After downloading OS X I can't find any of my photos I had on my mac. How do I get them back?

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

My mail ikon disappeared from task line, and i can't find any trace of my mail account on finder. anyone ?

My mail ikon disappeared from task line, and i can't find any trace of my mail account on finder. anyone ?

I dont even know what a time machine backup meens yeah i think so to, It was here this morning, and now its gone. and i cant find any trace of it.

No option to simulate cRIO device after installing Labview and RT/FPGA Modules from downloads (missing driver support?)

Hi guys--
Basically, I need to simulate a cRIO device without yet having the hardware on hand, like this:
How to Simulate FPGA Hardware Targets Using the Project Explorer with LabVIEW
Instead, I only get the options shown in the attachment "Add Target Options.jpg". I assume this is because of missing drivers, which I assume is due some mistake I made during a recent fresh install of LV. The install went like this: I downloaded (not disks) and installed the following (in this order, latest versions all around):
(1) LabView Development System
(2) Real-Time Module
(3) FPGA Module
(4) NI-RIO (install prompted by previous install)
(5) DAQmx
At the end of (1) and (2), I got the screen shown in the second attachment ("Drivers Install Message.jpg"), but could not get it to recognize the "NI Device Drivers" folder (which I also downloaded), or any of its sub-folders.
I feel I'm missing some obvious option for loading up the necessary drivers after the install, but can't seem to find reference to it in the forums. Could anyone give me a little push in the right direction?
Thanks a bunch, and have a great day.
Solved!
Go to Solution.
Attachments:
Add Target Options.jpg ‏57 KB
Drivers Install Message.jpg ‏47 KB

Michael--
Thanks for your reply. In answer to your questions, the DAQmx install seemed to go smoothly, and I believe this is evidenced by available my MAX Simulated Device options (shown in the attachment to this post). My best guess (could be wrong here) is that I cannot simulate a cRIO device because I was unable to install the drivers after the Real-Time Module installation (as described in my first post).
The source path selection screen for drivers ("Drivers Install Message" attachment in first post) told me "...you can install NI device drivers later.", and since it would not recognize anything in the NI Device Drivers folder I downloaded, I clicked on "Later".
I could narrow the issue down a bit if I could now install those drivers, but this is my first time installing without disks, and I can't figure out how to properly install the drivers from the folder I have sitting on my hard drive. Have I overlooked instructions somewhere on this procedure?
Thanks a bunch for your help.
Attachments:
MAX Device Simulation Options.jpg ‏52 KB

At a Genius Bar appointment yesterday, we determined that I needed to go to Mountain Lion from Lion. I purchased Mountain Lion at the Bar, and paused the install so that I could resume from home. Now I can't find it to resume. Not in Downloads. ?????

When I upgraded to Lion, my Parallels stopped working and I got a Bootcamp error message. It had worked fine for the prior year. I upgraded to Parallels 7. No luck. At the Genius Bar, the Genius uninstalled Bootcamp. No luck. I still get "The Boot Camp partition /dev/diskOs4 used by Hard Drive 1 is missing."
Another Genius suggested upgrading to Mountain Lion. While at the Bar, I purchased Mountain Lion and then we paused the install so that I could resume it at home. Once I got home, I can't find the Mountain Lion installer to resume. It's not in the Downloads file. Any clue?
My business programs all run on Windows, so I have to get it operating. The Genius Bar isn't much help. Does anyone know how to get Mountain Lion installed? How to get Parallels working?

The "Geniuses" (and I use that word in sarcasm) at the Bar are lying to you. Upgrading from Lion to Mt Lion will not fix whatever problems you are having. In fact it will most likely make them worse.
If you want to try installing Mt Lion to fix the problems you are having you will need to open the Mac App Store link in your Dock, Login to your Apple ID account for the MAS and go to your Purchases area. Mt Lion should be in there and you will be able to do a proper download. Once you either set your Mac into sleep or shut down and then left the internet connection at the Bar all record of that download was lost. So you will need to restart it again from the beginning, like described above.
Good Luck

Artifact for Office Picture Manager after install of Office Pro Plus 2013

Upgrading from Office 2003 to Office 2013, with the assumption that the Office 2013 install first removes all previous versions before installing.
For some users, running Windows 7, with Microsoft Office 2003 SP3 and the 2007 compatibility pack installed, after the Office 2013 Pro Plus installer runs, whenever an Office 2013 Access application is launched the user gets a message box as shown
below. None of our Access VBA have Office Picture Manager in the reference list, so it should not be an issue caused by any Access applications.
Since the Office Picture Manager is no longer part of Microsoft Office as of Office 2013, this is a problem. Several workarounds have been posted on several blogs on the Internet for installing Office Picture Manager from an earlier version on a computer
with Office 2013 installed to eliminate the error, which of course assumes that it is desireable to have Office Picture Manager.
My position is that there should be a fix for the orphaned artifacts calling for Office Picture Manager when launching Office 2013 MS Access, that does not involve the installation of a deprecated product. Multiple searches of TechNet come up empty
in that regard.
Is there a fix for this issue forthcoming, or does anyone have an answer that does not involve installing a backrevved Office Picture Manager just to make the error message shut up?
Clean install of the OS is not to be considered a solution. There are too many computers involved to even consider that to be acceptable. I would rather have a registry cleanup script that could be pushed through GPO than to have to go to each
computer and run a FixIt, so please try not to push the FixIt option either...
Thanks!

Always, the in-place upgrade doesn't remove all traces of Office 2003 from your computer, and this will cause unexpected issues for the new Office.
Actually, instead of doing a in-place upgrade, you can perform an
uninstall-upgrade to Office 2013. When uninstall the old version of Office 2003, you can make sure to remove any traces, and then install the new Office 2013.
For how to do an uninstall-upgrade, you can refer to this blog post:
http://blogs.technet.com/b/odsupport/archive/2011/04/06/how-to-perform-an-uninstall-upgrade-to-office-2010.aspx

Firefox continually hangs even after trying the solutions listed here, and in other sites, and I can't find any common link to pinpoint what is causing it.

I love Firefox but I may have no choice but to try Chrome instead. Over the past couple of weeks the version of Firefox I have installed on my Lenovo Edge 15 latop (which is the most current version of Firefoxc), hangs several times an hour, for approx a minute each time. I have tried to locate the cause of the problem by eliminating the websites I commonly visit, but it seems that it does not matter what website I visit, it continues to happen. I have even tried loading Firefox in safe mode and it still makes no difference. And this problem is only affecting Firefox, and none of my other programs are affected. I have used resource monitor to try and locate the problem and, when this problem occurs, Firefox is reported as taking up 25% of CPU consumption. I am using Windows 7.

I have a Mac and have tried the suggestion above with the places.sqlite but it DID NOT HELP! FIREFOX IS STILL HANGING!!!!!!!!!!!! I've been a real fan of firefox for several years, but lately it's just plain annoying!!! I have to force quit FF several times a day. I THINK I'M GOING TO SWITCH TO SAFARI until you guys get your act together soon :(

Office Pro 2013

I'm running Windows 7 and use Office Professional 2013. With the most recent auto update, now when I attempt to double click a Word or Excel file to open it, Office Small Business 2007 attempts to open and configure. Although I had Office SB 2007 on a previous
laptop, I don't believe it was ever on this laptop. If so, it was before I was provided this as a replacement by Dell for the previous laptop.
If I first open Word or Excel with a blank document or recent file, it opens fine. Then if I double click a Word or Excel file from Windows Explorer while Word/Excel 2013 is still open, the document opens without a problem.
How do I go about correcting the default settings so that when I double click a Word or Excel document it uses my Office Pro 2013 applications to open the file? Thanks for your help!

Hi,
Probably Office Small Business 2007 is pre-installed on this computer, and somehow Outlook Professional 2013 lost it's file association.
Please have a check in Control Panel\Programs\Programs and Features and see if you can find Office Small Business 2007 instance in the list.
To correct this, I would suggest you run
Microsoft Fix It tool to remove any previous version of Office from this computer, repair Office 2013 from control panel to re-create the file association, then verify result.
Hope this helps.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Directions on setting up to print on a HP officejet pro 8600 plus from a samsung notebook

At a new job and looking for directions on setting up to print on a HP officejet pro 8600 plus from a samsung notebook.
Can you please help me?

Hello JoeA12345
Welcome to the HP Forums.
I see that you looking for some assistance with setting up the printer on your new notebook.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How to create a Web Dynpro Project from Downloaded zip file?

Hi,
I have been working in Java Web Dynpro for last 1 month but not able
to create any Web Dynpro from Downloaded zip file?
Can anybody tell me how to create a Java Web Dynpro Project from
Donloaded zip code?
Regards
Kaushik Banerjee

Hi Kaushik,
You can add the existing zip file into your workspace by the following way -
First open the NWDS and create a new project by clicking file -> new -> Project -> Simple -> Project
and then File -> Import -> zipfile and then browse the zip file into the newly created project.
or else you can also unzip the zip file into a folder and then Use the option of Import an exisitng project into workspace. You can find this in the File-> import -> Existing project into workspace. and then use the Browse option to browse to the existing folder.
After importing the project you need to rebuild the project
Regards,
Raju Bonagiri.

TS1368 I had to delete the Itunes files entirely from my computer. Now that I want to download Itunes again, I can not find a site that it let me to do so.

Hello,
I had to delete Itunes from my Windows Xp, now that I am looking for a site to download it again, I can not find any. I went to Apple, I got as far as "download" but when I klicked on it, nothing happened. What should I do?
Thank you for your help.

iTunes is free... there is no membership fee.
Try providing some specifics about what is going on and others might be able to provide a resolution.

Office Pro 2013 installing in wrong language

I started downloading Office Pro 2013 and the screens are in French. I did not continue the download, but I cannot figure out how to re-start it in English.

Hi,
How did you download Office Pro 2013?
If you are downloading Office from MY account page, you will have an option to choose
Language and install options to change the language and choose between the 32-bit and 64-bit version of Office:
https://office.microsoft.com/MyAccount.aspx
If you are downloading Office using Office Deployment Tool (ODT), you can specify Language ID="en-us" in the Click-To-Run Configuration.xml file. For example:
<Configuration>
<Add SourcePath="\\server\share" OfficeClientEdition="32">
   <Product ID="O365ProPlusRetail" >
     <Language ID="en-us" />
   </Product>
</Add>
</Configuration>
More reference:
http://technet.microsoft.com/en-us/library/jj219422(v=office.15).aspx
Hope this helps, please feel free to post back.
Thanks,
Ethan Hua CHN
TechNet Community Support

I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit ? And office pro 2013 64 bit too?

I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows programs I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit or just install 32 bit? (Going with Win7 as I hate Win8). And I will install Office Pro 2013 64 bit too or 32 bit or is that automatically selected by the underlying OS (I use Word, Excel and Access mainly for a membership database of a local club) ? I am not a power user so would appreciate advice on way to go

Again thank you. If I only use word, excel and access in the Win environment and Mac OS for email and safari for internet do I need anti virus software . Ie my connection to the world is mac only and I use office pro only to ruin the club, newsletters, membership database etc. and of course anything I do there can drag/drop to the mac environ to email. That's my understanding anyway. Next will my existing .pst file copy directly into mac mail or do I have to runs translator as I recall reading something about that ages ago when I started thinking Mac

Unable to completely install Office Pro 2013 in Windows 8.1

I had Windows 8 on my computer and purchased Office Pro 2013 and tried to install it. It completed part way and then it kept asking me for a password. Then it displayed the Letters and numbers I was to retype and tried that 4 times with no avail. To make
a long story short I never was able to install Office completely. I have none of the programs such as Word, etc. What should I do?

Hi
What did you mean by asking for password? Were you saying the product key code?
Multiple versions of Office installed in one computer can cause unexpected problems, we recommend you completely remove your old suites in your machine:
http://support.microsoft.com/kb/2739501
http://support.microsoft.com/kb/971179/en-us
Refer to the following article to activate your Office 2013 programs:
http://office.microsoft.com/en-us/support/activate-office-2013-programs-HA102819770.aspx
Best regards
Tylor Wang
TechNet Community Support

After Install of Office Pro 2013 Plus from downloaded iso file Outlook can't find any outlook.pst

Similar Messages

Maybe you are looking for