Badi's & Tables in ESS

Hi
I am working on ESS in ERP 04. I need to do changes in ESS UI.
Can anyone advice on Where and How we can use Badi's and tables to bring changes in UI.
Thanks
Rakesh

HRPAD00INFTYUI

Similar Messages

How to create an entry in Badi Filter table T77HAP_FLT_PRP

How to create an entry in Badi Filter table T77HAP_FLT_PRP

Hello Rahul,
Filter types should be created on badi implementations ( in transaction se19 )
Read my answer on this thread :
Re: BADI:Filter type un editable
I hope it helps.
Bulent

BAdI system table name?

Hi,
Does anyone know the System Table where BAdI's are stored?
I mean, I want to write a Function Module which accepts
an internal table of BAdI Definition names (SE18) and the
Function Module returns an internal table of interfaces
used by the BAdi...
Pls Help.
Thanks in advance.

Hi,
The BAdI database tables are
SXS_INTER -->Exit: Definition side: Interfaces
SXC_EXIT -->Exit: Implementation side: Assignment: Exit - Implementation
SXC_CLASS -->Exit, implementation side: Class assignment (multiple)
SXC_ATTR -->Exit: Implementation side: Attributes
These tables are always accessed by the views V_EXT_IMP and V_EXT_ACT.
Regards,
Tanveer.
<b>Please mark helpful answers</b>
Hey Anand, i remember abt that jco doc.. just have misplaced it.. will find it n shall mail u..
Message was edited by: Tanveer Shaikh

Can the same BADI be called in ESS and Backend ?

Can the same BADI be called in ESS and Backend ? For Eg. HR_IN_LOANS_VALIDATE

What verson of iPhoto did your MacBook Pro come with? If it was iPnoto 8 (09) or earlier you will have to purchase iPhoto 9 (11) from the App Store. If your MBP came with iPhoto 9 preinstalled you should be able to update to 9.4.1 without charge.
However, as Niel pinted out the iPad iPhoto is a different animal (pun intended) entirely and will have to be purchased.
OT

Bad Partition table?

Hey Guys, I seem to be getting Bad Partition Table once in awhile on my main hard drive with windows so I use chkdsk and repair but it happens TOO often. I've even reformatted the darn thing and yet it does it. What does this mean? Does it mean my hard drive is dying? nothing else goes wrong except that Partition Table.

Hi Austin
Do you have SMART enabled in bios, sometimes this can warn you of impending trouble. What causes Bad partition tables, well, how long is a piece of string. Could well be a damaged section due to a power surge, spike, or crash. Could be a virus lurking, is your boot sector protection enabled. Could be the OS, or a prog your using. Could be a bad Molex connector to the HDD. Could be bad cable, or IDE connector, or bent pin. Could be a disk that has had Linux installed, and left bits of drivers. Could just be an old drive getting past it.
Best change it before it does some real damage to disk controller or Mobo.
cheers
jocko

Addig a new row in a table in Ess/cats

Hello all,
I am working on Ess/cats application.
By default it is displying me 8 rows.I have to put a button to add a new row in the table.
but i could not find a way to add a new row.
Thanks and Regards.
Punit Pawar

Hi,
In the onAction of button Add one more element in node which is bounded to the table. You can use following code.
public void onActionAddRow(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionAddRow(ServerEvent)
       IWDNodeElement element = wdContext.node<Node_Name>().create<Node_Name>Element();" Here Node_Name is the name of node which is bounded to your table.
       wdContext.node<Node_Name>().addElement(element);
    //@@end
I hope it helps.
Regards,
Rohit

RPM - BADI/FM/TABLES to find authorizations for item in ABAP

Hi all.
I have an issue.
I am italian and I am not very good on writing in english, I am sorry for this.
I must hide a field (STATUS for item dashboard) for some users (tab. Authorizations).
I have write my code in class /RPM/OBJECT_SERVICES, method GET_FIELD_INFO.
I need to find BADI, FM or tables to read the authorizated user for a specificated item.
Can you help me?
Thanks in advance.
Vanessa

Resolved!!!
ACO_USER table!!!
Code:
METHOD /rpm/if_ex_item_api~item_ui_config_modify.
DATA ls_field_description LIKE LINE OF ct_field_description.
DATA lo_activity TYPE aco_actvt.
**DEBUG!!! - inizio
DATA lo_exit.
DO.
IF lo_exit = 'X'.
EXIT.
ENDIF.
ENDDO.
**DEBUG!!! - fine
LOOP AT ct_field_description INTO ls_field_description WHERE fieldname EQ 'STATUS'.
SELECT SINGLE activity
FROM aco_user
INTO lo_activity
WHERE object_id = is_item_attributes-guid
AND user_id = sy-uname
AND type = 'RIH'. "Item
IF lo_activity = 'Write'.
MOVE 'X' TO ls_field_description-enabled.
MOVE 'X' TO ls_field_description-visible.
MOVE 'X' TO ls_field_description-required.
MOVE ' ' TO ls_field_description-read_only.
MODIFY ct_field_description FROM ls_field_description.
ENDIF.
ENDLOOP.
ENDMETHOD.

Tables in ESS iView

In ESS, there are tables in a lot of iView. In webDynpro , normally these tables are just a element defined as table/grid without anything shown in layout. I wonder where the layout, columns and datas are defined and retrieved, can anyone give me a direction?

Hi,
Most of the ESS applications are WD Java applications.
If you want to know where to do the changes you need to go to NWDS and the component it is using which you can find in iView properties.
If you look at the code you can see most of the coding is dynamic. The Data in the tables will be populated dynamically.
So if you want to do any changes
1. See the backend config for the possibility to add the fields (if you find any do the changes there and see whether it is reflecting in the Portal screen)
2. Once added to populate either you need to enhance the FM that is been called when executing the iView. (to find which FM is called go to ECC system and t.code ST05 and activate the trace for that user and then run the iView from Portal after that deactivate the trace and display trace to see what FM are called)
3. If you haven't solved the issue then you need to look at Java code for additional changes.
Hope this helps.
Cheers-
Pramod

Standard Workflow Tables for ESS Claims

Hi Experts,
We have configured the ESS / MSS Claims process in R/3, Portal and Workflow. Once I am applying claim in portal and approving the claim. I am running the standard program to update the infotypes. Now my query is, where these datas will be stored in the backend. When the user is required to view the datas how should they might check these datas except through infotype. I have checked the standard tables there is no data available.
Kindly reply me as soon as possible.... So that I have process it further
Regards,
Kannan
Edited by: Kanna83 on Dec 21, 2011 6:35 PM

Dear Siddharth,
Thanks for your valuable reply.
But in the table T77WWW_CLTRANSD we are not able to see any records getting stored.
How to view the records in the table T77WWW_CLTRANSD?
Can u let us knw that the table T7INCLM_ADV_TRNS ( Claims & Advance Transaction Table ) will get updated or not???
Is there any report to update the table T7INCLM_ADV_TRNS.
Please let us knw.
Thanks,
Nalla B.

BADIs for tables

Hi ,
I want to update values to standard tables from a Z-table.
Could anyone provide some BADI(s) that update SAP APO tables
/SAPAPO/SNP02
/SAPAPO/MATRQ
/SAPAPO/MATLOTSZ
Please help me out.

Hi,
BADI is not a solution for updating tables. They are mainly used for enhancement related issues and is at the programming level.
BAPI and functions modules can be used for updating the tables.
Check out the link provided below for BAPIs related to APO.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/scm/apo-technical
Regards,
John Mani

Program or exit/BAdi for table DVER (Material Consumption for MRP Area)

Hi,
I want to update table DVER (Material Consumption for MRP Area).
Please suggest if any program or exit/BAdi.

Check these function modules:
CONSUMPTION_EXI_MAT_PLA_PE_DB
CONSUMPTION_READ_FOR_MM_DB
CONSUMPTION_REF_MAT_PLA_PE_DB
DVER_GENERIC_EXIS_MATNR
DVER_GENERIC_EXIS_MATNR_DB_PER
DVER_GENERIC_READ_MATNR_PLA_PE
DVER_GET_BILD
DVER_SET_DATA
DVER_SET_SUB
A badi/user exit is triggerred when a standard transaction is run.Let me know if you want to update the table when a std. transaction is executed and the transaction code.

Bad update table?

Hi
I have in FORM code:
UPDATE Z_TABLE SET COL1 = 'value' WHERE COL2 = var
And in this program is also many inserts and BDC codes.
After execute all PERFORM is command COMMIT WORK AND WAIT.
Problem is only in update table Z_TABLE. Some rows in database don't have updated
values.
It is possible that this error exists because FORM is executed many times ?
If I change this code to the one command: UPDATE Z_TABLE from itab, this repaire
my all updates or maybe this is work the same like single record UPDATE?

UPDATE dbtab - source
Syntax
... { {SET set_expression [WHERE sql_cond]}
    | {FROM wa|{TABLE itab}} }.
Alternatives:
1. ... SET set_expression [WHERE sql_cond]
2. ... FROM wa
3. ... FROM TABLE itab
Effect
The specifications in source define which rows and columns are changed. Either individual columns are changed using the addition SET or entire rows are overwritten using the addition FROM.
After FROM, either a non-table-type data object wa or an internal table itab can be specified. The content of these objects determines - on the one hand - which row(s) is/are changed, and
- on the other hand - which values are used to overwrite the row(s).
Alternative 1
... SET set_expression [WHERE sql_cond]
Effect
After the addition SET, the changes are specified in a list of change expressions in set_expression.
The addition WHERE uses a logical expression sql_cond to define in which rows of the database table the changes are executed. For the logical expression sql_cond, the same applies as for the WHEREcondition of the statement SELECT, with the exception that no subqueries are to be evaluated in the database table to be changed. If no WHERE condition is specified, all the rows in the database table are changed. If a column of the type STRING or RAWSTRING is changed, the primary key must be fully specified in the WHERE condition.
The content of primary key fields can only be changed if the respective database table is not linked with a search help and if pool and cluster tables are not accessed. If a link was to be created through the changes and this row would cause double entries in the primary key or a unique secondary index of the database table, no row is changed and sy-subrc is set to 4.
Notes
Before release 6.10, SET could only be specified for static specification of the database table.
Before release 6.10, no dynamic logical expressions could be used in the WHERE condition of the statement UPDATE.
Example
Dynamic conversion of the content of an arbitrary column in an arbitrary database table of a previous currency in Euro.
PARAMETERS: table    TYPE c LENGTH 30,
            column   TYPE c LENGTH 30,
            old_curr TYPE sycurr.
DATA: set_expr TYPE string,
      condition TYPE string.
CONCATENATE column ` = 'EUR'`
            INTO set_expr.
CONCATENATE column ` = old_curr`
            INTO condition.
TRY.
    UPDATE (table)
    SET    (set_expr)
    WHERE (condition).
CATCH cx_sy_dynamic_osql_error.
    MESSAGE `Error in update!` TYPE 'I'.
ENDTRY.
Alternative 2
... FROM wa
Effect
If you specify a non-table-type work area wa, the system will search for a row in the database table which, in its primary key, has the same content as the respective beginning part of the work area. The content of the work area is interpreted in its non-converted form and in accordance with the structure of the database table or the view. The content of the work area is assigned to this row. The assignment takes place without conversion from the left to the right in accordance with the structure of the database table or the view. The work area must fulfill the prerequisites for use in Open SQL statements.
If there is no row with the same content for the primary key in the database or if the change would lead to a double entry in a unique secondary index, the line is not changed and sy-subrc is set to 4.
Notes
The work area wa should always be declared in relation to the database table or the view in the ABAP Dictionary.
If you have a static specification of the database table or the view, the specification of the work area using FROM wa can be omitted outside of classes - provided a table work area dbtab for the respective database table or the view is declared using the statement TABLES. The system expands the UPDATE statement implicitly to include the addition FROM dbtab.
Alternative 3
... FROM TABLE itab
Effect
When an internal table itab is specified, the system processes all the rows of the internal table in accordance with the rules for the work area wa. The row type of the internal table must meet the requirements for use in Open-SQL statements.
If, in the database, there is no row with the same content of the primary key for a row in the internal table, or if the change would lead to a double entry in a unique secondary key, the respective row is not changed and sy-subrc is set to 4. If the internal table is empty, sy-subrc is set to 0. The system field sy-dbcnt is always set to the number of rows actually inserted.
Example
Reduction of the flight cost for all of today's flights of an airline carrier in the database table SFLIGHT by the percentage percent. The calculation of the new price is always done in an internal table sflight_tab and the database table is changed accordingly.
PARAMETERS: p_carrid TYPE sflight-carrid,
            percent TYPE p LENGTH 1 DECIMALS 0.
DATA sflight_tab TYPE TABLE OF sflight.
FIELD-SYMBOLS <sflight> TYPE sflight.
SELECT *
       FROM sflight
       INTO TABLE sflight_tab
       WHERE carrid = p_carrid AND
             fldate = sy-datum.
IF sy-subrc = 0.
LOOP AT sflight_tab ASSIGNING <sflight>.
    <sflight>-price =
      <sflight>-price * ( 1 - percent / 100 ).
ENDLOOP.
ENDIF.
UPDATE sflight FROM TABLE sflight_tab.

ESS - add a new column to Record Working Time table

Hello all,
My client would like to add a column to the Record Working Time table in ESS. They would like to add a column for Activity Name next to Activity Number. Can anyone tell me where this can be congured? Or would this be something I would need to hard-code in the ess~cat source code?
Thanks,
-Kevin

I have figured out the 2 step process needed for this, involving Modifiable and Influencing. So I am able to add new fields. The only issue I am running into now appears to be dependant on the field name.
I can add CATSD-VORNR
But I cant add CATSDB-LTXA1
I have tried a few variations and it seems i can add fields from CATSD but not from CATSDB?
Has anyone else seen this or know what steps must be taken to display CATSDB-LTXA1?
Thanks,
-Kevin

Using MISSING FIELD VALUES ARE NULL for external table

I want to place a null for values missing in the sub_account field. Here is my external table:
CREATE OR REPLACE DIRECTORY INCOMING_ORDERS_log_dir
AS 'c:\starpubs\starpubs\dataformats\logs\INCOMING_ORDERS\log';
CREATE OR REPLACE DIRECTORY INCOMING_ORDERS_bad_dir
AS 'c:\starpubs\starpubs\dataformats\logs\INCOMING_ORDERS\bad';
create table ext_INCOMING_ORDERS_table (
Account varchar(5),
Sub_Account varchar(1),
Override_Code varchar(1),
Nomenclature varchar(28),
chg_nbr varchar(3),
quantity integer,
U_I varchar(5),
zipcode varchar(5),
type_reject varchar(2)
organization external
type oracle_loader
default directory user_dir
access parameters
records delimited by newline
missing field values are null
badfile INCOMING_ORDERS_bad_dir:'INCOMING_ORDERS%a_%p.bad'
logfile INCOMING_ORDERS_log_dir:'INCOMING_ORDERS%a_%p.log'
fields
Account(1:5) char(5),
Sub_Account(7:7) char(1),
Override_Code(10:10) char(1),
Nomenclature(11:38) char(28),
chg_nbr(40:42) char(3),
quantity(44:48) integer external,
U_I(50:54) char(5),
zipcode(56:60) char(5),
type_reject(61:62) char(2)
location('PTCLICK.MANUAL.NOMEN.TXT','PTCLICK.ORDERS.TXT', 'EUR_RES.TXT', 'MQ.TXT', 'BPRO.TXT')
reject limit unlimited;
How can I place the MISSING FIELD VALUES ARE NULL for missing values for the sub_account?

made the change I received this error:
SQL> select * from ext_INCOMING_ORDERS_table;
select * from ext_INCOMING_ORDERS_table
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-00554: error encountered while parsing access parameters
KUP-01005: syntax error: found "no": expecting one of: "comma, date_format,
defaultif, enclosed, ltrim, lrtrim, ldrtrim, notrim, nullif, optionally, ),
rtrim, terminated"
KUP-01007: at line 7 column 26
CREATE OR REPLACE DIRECTORY INCOMING_ORDERS_log_dir
AS 'c:\starpubs\starpubs\dataformats\logs\INCOMING_ORDERS\log';
CREATE OR REPLACE DIRECTORY INCOMING_ORDERS_bad_dir
AS 'c:\starpubs\starpubs\dataformats\logs\INCOMING_ORDERS\bad';
create table ext_INCOMING_ORDERS_table (
Account varchar(5),
Sub_Account varchar(1),
Override_Code varchar(1),
Nomenclature varchar(28),
chg_nbr varchar(3),
quantity integer,
U_I varchar(5),
zipcode varchar(5),
type_reject varchar(2)
organization external
type oracle_loader
default directory user_dir
access parameters
records delimited by newline
badfile INCOMING_ORDERS_bad_dir:'INCOMING_ORDERS%a_%p.bad'
logfile INCOMING_ORDERS_log_dir:'INCOMING_ORDERS%a_%p.log'
fields
Account(1:5) char(5),
Sub_Account(7:7) char(1) NO PRESERVE BLANKS,
Override_Code(10:10) char(1),
Nomenclature(11:38) char(28),
chg_nbr(40:42) char(3),
quantity(44:48) integer external,
U_I(50:54) char(5),
zipcode(56:60) char(5),
type_reject(61:62) char(2)
location('PTCLICK.MANUAL.NOMEN.TXT','PTCLICK.ORDERS.TXT', 'EUR_RES.TXT', 'MQ.TXT', 'BPRO.TXT')
reject limit unlimited;

Creation of BADI's Definition, why?

Hello everyone,
i hope someone can explain to me, why we should create BADI's definition.
This is my point:
BADI's are enhancements, that are available in the Standard SAP, to offer the possibilty of changing/improving the standard code to respond correctly to a company/customer needs. Customer can implement these definitions.
So, even if we create a new BADI definition, this could'n be trigger/active by/in the standard code.
So, the possibility of creating "customer" BADIS definition, is for when you develop a customer program, and you want to create an enhancements in that development?
I associate the BADI's definition to enhancements made by SAP developers in SAP Standard, and badi's implementation to customer developers.
It's like an analogy with SMOD( SAP ) and CMOD (CUSTOMER).
Could somone explain to me, the benefits from creating BADI's definition's from customer point of view?
Thanks for your attention,
Pedro

Hi,
Have a look at below links.
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Business add-ins are enhancements to the standard version of the system.
Business Add-In is a new SAP enhancement technique based on ABAP Objects.
They can be inserted into the SAP system based on specific user requirements.
Each Business Add-In has:
at least one Business Add-In definition
a Business Add-In interface
a Business Add-In class that implements the interface
In order to enhance a program, a Business Add-In must first be defined
Subsequently two classes are automatically generated:
An interface with IF_EX_ inserted between the first and second characters of the BADI name.
An adapter class with CL_EX_ inserted between the first and second characters of the BADI name.
The Application developer creates an interface for this Add-In.
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
For more info have a look at below links:
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
How to develop BADI
Regards,
Ram

Badi's & Tables in ESS

Similar Messages

Maybe you are looking for