Program or exit/BAdi for table DVER (Material Consumption for MRP Area)

Hi,
I want to update table DVER (Material Consumption for MRP Area).
Please suggest if any program or exit/BAdi.

Check these function modules:
CONSUMPTION_EXI_MAT_PLA_PE_DB
CONSUMPTION_READ_FOR_MM_DB
CONSUMPTION_REF_MAT_PLA_PE_DB
DVER_GENERIC_EXIS_MATNR
DVER_GENERIC_EXIS_MATNR_DB_PER
DVER_GENERIC_READ_MATNR_PLA_PE
DVER_GET_BILD
DVER_SET_DATA
DVER_SET_SUB
A badi/user exit is triggerred when a standard transaction is run.Let me know if you want to update the table when a std. transaction is executed and the transaction code.

Similar Messages

Report for Material Consumption for WBSE & Network

Dear Experts,
I want to see Material Consumption for
for WBSE 281Q (Project to Project)
for Network 221Q (Network from Project)
I can see values in Report MB51,
but I can not see for which WBSE it is consumed or from which WBSE it is consumed.
The Entries are there in table MSEG field MAT_PSPNR.
It is not shown in Report MB51, For this column blank is shown, no value is shown.
Can you help me, how can I see material consumption for WBSE & Network with WBSE ID for/from which.
Thanks
SSanjay

Dear Muralee,
I think I am not able to explain you the thing or you are not getting what I want to say.
In my first post I have said:
I am trying MB51, with
221Q Project to Project GI
281Q Project to Network GI.
I am getting material consumption quantities,
Network/Activities for which consumption is done is also shown.
But the WBSE for which / from which consumption is done, that column is blank.
It is showing WBSE for 101 GR for Project
I want to know for which /from which WBSE material was consumed?
I have tried to explain problem again.
Can you please help?
SSanjay

Extend Material to Different MRP Areas

Hi Friends!
I want to extend a material to different MRP areas. Is this possible using BAPI_MATERIAL_SAVEDATA? I couldn't find the MRP area field(should be an input table holding multiple records) in the BAPI to input for extending the material.
Or is there any BAPI/FM available for this?

MRP fields are in the PLANTDATA structure.
So I guess it should be here.
What is the SAP name of the field you are looking for ?
Erwan

User Exits / BADIs triggered during the Material document creation

Hi Experts,
Can anybody tell me the User Exits / BADIs /Possibilities that can be triggered during the Material Document Creation which can be used to update the Equipment Master User Statuses.
Thanks,
Sangeeta.

Hey Sangeeta,
Try these User Exit's
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Using Enhancement MGA00001 (Function Exit : EXIT_SAPLMGMU_001 ) you can validate & Change your Material Document Number.
Badi's
BADI_EAN_SYSTEMATIC
BADI_GTIN_VARIANT
BADI_MAT_F_SPEC_SEL
BADI_MATERIAL_CHECK
BADI_MATERIAL_OD
BADI_MATERIAL_OD
BADI_MATERIAL_REF
BADI_MATNR_CHECK_PVS
BADI_MM_MATNR
BADI_MM_MATNR
CDT_CHECK_MATERIAL
MG_MASS_NEWSEG
MG_MASS_NEWSEG
WRF_DISCONT_FACT_E
Note: This is for transaction code MM01, MM02 & MM03.
Regards,
Saravanan M

Total Material Consumption for Period

Dear all,
I want to get total consumption for the material form today's date to last six months, i know the table MVER. Can any one please tell me which fields to pick for the last six months from todays date.
Thanks,

Hi Pratibha,
Have you looked FM <b>CONSUMPTION_READ_FOR_MM</b>?
Here are the parameters.
- Material Number MATNR
- Plant WERKS
- Period Indicator PERKZ (M= Monthly, W=Weekly, T=Daily, P = Fiscal Year)
- Fiscal year variant PERIV (if PERKZ = P)
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

OVS Help for Table Fields in WebDynpro for JAVA

Is it possible to create a ovs help input for table fields?
If yes, how can I do it?
Help me...
Thanks!!!

Hi,
Use the code for tabel column also.
Web Dynpro: the OVSBuilder utility or OVS Re-Reloaded
Regards,
Lavanya.G

Pass on Material requirements to MRP areas within Plant

- We are on ECC 6.0 & have a scenario wherein material requirements from depots are passed on to respective plants according to the settings defined in the Special Procurement key in the Material Master (MRP View)
- The requirement from depots are passed on to the manufacturing plant & further down to the Plant in which MRP areas are defined, in the form of Planned Orders, if the stock is not sufficient at depot.
- For Subcontracting, we have various MRP areas within a single separate plant. The requirement is that PR that is generated for STO should be able to pass the requirement to an MRP area (after stock checking at MRP area level), (system to decide the MRP area to be selected for passing on the requirements).
- Currently the system is passing the requirements & checking the stock at plant level only.
- Stock determination rules donu2019t seem to work here.
- The opening up of the u2018Issue storage locationu2019 in STOu2019s by config: (u201CPurchase order-> - Set up Stock Transport order - > Set up Stock Transfer between storage locationsu201D) is yet to be tested.
- But in that case, only a single MRP area is defined for the material & therefore the requirements may flow directly to that particular MRP area. In case of Multiple MRP areas being defined for a single material, how can we ensure that the system determines a stock checking at one particular MRP area & pass on the requirements to it.
Seeking guidance as to how this issue can be resolved.
Precisely,
REQ.FRM>FLOW TO>AS (MRP element)
Depot>Plant 1>Planned order (PlOrd)
Plant 1>Plant 2>Material reservation (MtlRes)
Plant 2>MRP area of Plant 2>Transfer reservation (TrnRes)

dear colleague,
Please check the following info that can be useful:
1) Note 358936 is relevant for MRP areas of type storage location and
   not for Subcontractor MRP areas (which you would be knowing).
2) Secondly this note was created as an advance development and not
   for any particular customer problem. It was also feasible to
   develop this functionality with a small change.
3) The feature of procurement with Schedule lines for components
   in subcontractor MRP areas is not available in the standard SAP
   suite and there are no plans to develop this in the near future.
   This feature would be an advance development.
best regards

RPM - BADI/FM/TABLES to find authorizations for item in ABAP

Hi all.
I have an issue.
I am italian and I am not very good on writing in english, I am sorry for this.
I must hide a field (STATUS for item dashboard) for some users (tab. Authorizations).
I have write my code in class /RPM/OBJECT_SERVICES, method GET_FIELD_INFO.
I need to find BADI, FM or tables to read the authorizated user for a specificated item.
Can you help me?
Thanks in advance.
Vanessa

Resolved!!!
ACO_USER table!!!
Code:
METHOD /rpm/if_ex_item_api~item_ui_config_modify.
DATA ls_field_description LIKE LINE OF ct_field_description.
DATA lo_activity TYPE aco_actvt.
**DEBUG!!! - inizio
DATA lo_exit.
DO.
IF lo_exit = 'X'.
EXIT.
ENDIF.
ENDDO.
**DEBUG!!! - fine
LOOP AT ct_field_description INTO ls_field_description WHERE fieldname EQ 'STATUS'.
SELECT SINGLE activity
FROM aco_user
INTO lo_activity
WHERE object_id = is_item_attributes-guid
AND user_id = sy-uname
AND type = 'RIH'. "Item
IF lo_activity = 'Write'.
MOVE 'X' TO ls_field_description-enabled.
MOVE 'X' TO ls_field_description-visible.
MOVE 'X' TO ls_field_description-required.
MOVE ' ' TO ls_field_description-read_only.
MODIFY ct_field_description FROM ls_field_description.
ENDIF.
ENDLOOP.
ENDMETHOD.

User exit/ BADI in f-32 / f-28 for adding application tool bar button

Hi Experts,
There is a requirement, for adding application tool bar button in the Transaction codes F-32 / F-28 / Feba_lockbox. So that while clearing documents with reference document, they can upload the data(Reference Documents) from local file and after the data is fetched for clearing, they need to download the data to local file for verification. If the data is verified to be okay, then they can go ahead with simulation and posting. They need this verification to be done in excel sheet, so need to download the data into local file.
I found a BADI in that screen is BADI_LAYER but I don't think it is relevant.
Any help is apreciated!
Is there any EXIT ? Because I can not find it too.
Regards,
Nitin

where you did the enhancement?
I have to create the IDOC once Clear docuemnt is created.. It may help me.

User Exit/BADI while setting status as TECO for WBS in CJ20N

Hi all,
I need a BADI/User Exit which triggers when we try to set the status of WBS as 'TECO' in CJ20N transaction.
Please help.
Thanks in Advance,
Sagar

Hi Sagar,
Go through this Badis.
AFABD_CHANGE
DOCUMENT_MAIN01
DOCUMENT_OBJ
DOCUMENT_STORAGE01
IHSA_LIST_EDITING
IWO1_ORDER_BADI
IWO1_ORDER_BADI
MRO_CONTRACT
MRO_CONTRACT
NETW_DIR_PROCUREMENT_REF
NETW_USER_FIELDS_F4
PLM_CATALOG_IF
PLM_CATALOG_IF
PROJECTDEF_UPDATE
PS_TRANSFER_DATES
WBS_FIELDS_FOR_ASSET
WBS_USER_FIELDS_F4
WORKBREAKDOWN_UPDATE
If Found Help Full Do Reward.
Regards.
Eshwar.

SE16 for tables, what to use for looking into structures

Hi,
I want to check a structure field for 700 materials on contents. I don't have a report to check them and I would like to check them in the same way as you can check table-fields with SE16. Is this possible?
Willem-jan Bos

Dear Willem-jan Bos,
It is <b>not possible</b> to see the data in structures as they do not store the data. You can only see the data of tables and views in SE16/SE11. Structures are used in tables or in programs. They never store the data.
Regards,
Naveen.

Determining material consumption for multiple VMI suppliers?

Is anyone managing supplier VMI with multiple suppliers for materials?
I'm looking for a way to determine how much daily consumption to send to a supplier in an EDI 852 message when more than one supplier is used to supply the material. The MSEG table can be used to pull Goods Issues to production orders, but there's no way to determine how much of the consumption should be reported to each of the suppliers.
If a quota arrangement is set up with percentages for each supplier, I suppose the consumption and the requirements that come out of function module 'MD_STOCK_REQUIREMENTS_LIST_API' could be used to determine a percentage of these quantities to send to the suppliers. But quota arrangements get complicated, for example, giving the first 10,000 pounds to one supplier and then splitting the rest. MRP handles all that for planned orders it creates.
Thanks.

try using PI_ORDCO for confieming the Orders.
Set the Back flushing for all these materials, so that with Confirmation these GI will be posted.

PP-MM-FI integration for Non-Stock material consumption

The client is expecting a simple solution for a Std SAP process which is LIKE subcontracting....but actually not.
The requirement is to set up a process of external operations using a NonStock (NLAG) material ( which will have no physical stock updation when GR is done). This material is a part of BOM with item category N. The material will have S price control. ( Must from business requirements). PR gets created from process order --> converted to PO --> then 101 and simultaneous automatic consumption gets debited to order. (with a price = PO price). PO has a account assignment F and item category blank Standard).
Question - This behaviour is not desired. The "Std cost" should be used in posting a consumption posting..& the rest ( PO price less Std price) should be shown as purchase price variance in a different acount. How to customise this break up ? Is there way in MM pricing conditions or something else ?.
Pl note that there is no stock entry...only consumption will be debited with GR offset at PO price. Also at invoice verification, the price if different should be posted to price difference account ( which is not assigned to process order...it is directly going to COPA).
Might be a very simple SAP solutions / answers from MM /PP......so that we avoid the ABAP development for reposting..
Could somebody help pls ?
Regards
Ram

Hi,
Since Material is Non-Stock Material so it is must to maintain the Account Assignment Category in PR or PO for this Material. And once you maintain the Account Assignment Category in PO and do GR w.r.t. this PO then it will not consider the Material Master Price (Standard Price) since there is not any Stock Account Entry during GR, it will hit the Expense Account. And Price Difference Account will get debited only if Stock Account will come in picture.
So following Accounting Entry will get generated;
During GR (MIGO);
Expense Account - Dr
GR/IR Clearing A/c - Cr
During LIV (MIRO);
Vendor Account - Cr
GR/IR Clearing A/c - Dr

Can i get a consolidated report for material consumption for all plants?

can i get a report where i can have the material quantity and value, across for all the plants and the quanity and value of the material consumed and balance for a particular period
Example; I have a raw material -COPPER ROD , Period is from 1 April2010 to 1 July 2010, I want to know what was the Quanity and Value of copper rod acorss 4 Plants, how much has been consumed (Quanity and Value) and how muchis left(Quanity & Value) as on 1 july2010

Dear Yadav,
Check with reports COOIS, MB51 & MB5B
Regards
Madhu

Material Consumption for Order consumption-Inter Company

We are trying to make a stock transfer posting for an order consumption from one company code another company code. But the system is issuing a message (CK 792) that "No transfer price maintained for company code change".
In our case, transfer price is not active. Then why it is showing this message ? Cant we make an inter-company stock transfer posting without a transfer price setting ?

I had the same issue and remembered that in my costing variant I needed to go to the "assignment" control tab and activate my controlling area for "cross-company code costing". Once I did this I was able to cost successfully between 2 plants each linked to 2 different company codes. In MRP2 view of procurement plant material master, procurement type "F" (external procurement) and "special procurement" (pointing back to supply plant) must be defined. Once this was set up the cost record for supply plant was passed onto receiving plant with status KA - costed without errors. I then marked and released without issues. Later in the project I'm working on I will address any uplift or mark up for transfer pricing, but for right now just wanted to correct error message CK792 (no transfer price maintained for company code change) which insisted a transfer price must be used for the valuation. This was not true, my cross-company code configuration within my costing variant was not activated, so cross company costing would not work. I'm good to go..

Program or exit/BAdi for table DVER (Material Consumption for MRP Area)

Similar Messages

Maybe you are looking for