BI Publisher: Fixed height size table Template

Hi
I'm creating a template for BI Publisher where I need a fixed table height size.
Example:
I need a table with 10 rows (fixed) if I print the report with 1 row it will occupy the rest with empty rows and if I print the report with 10 rows, the 10 lines will be field.
I tried to use the "at least" option for table but when I print the report it puts each line occupying the size I put in "at least" option.
How can I do this?
EDIT: I'm using this in Apex.
Edited by: Ownr on 18/Fev/2009 15:15

please check in this forum , how to display N rows per page.
Re: Can you limit returned rows in a loop?
Limit number of rows in a table to 10

Similar Messages

Fixed Size Table

I'm creating an rtf template for a master detail report which will be printed over template papers not white papers, so i want to make a fixed size table lets say of 10 rows for details. When i tried to make a table of 10 rows and put the for each loop statement in first row i got table of details + 9 empty rows !! so please can anyone guide me here.
Thanks in advance.

Does it really make sense to specify a limit in terms of storage space rather than time? If there is a 500x difference in the number of inserts over the course of an hour, it seems likely to me that users would generally want to keep a certain number of days worth of log information rather than keeping a certain volume in MB. If you ask for a limit in MB, users that use the low rate of inserts would end up with a table so small that if you got to the point of generating lots of records you'd be aging them out far too fast-- those that use the higher rate of inserts would end up with a huge table that has far more history than they need just to accomodate keeping a certain window of log records at the peak.
If you are determined to limit the size of the table, you could potentially run a program periodically that determines the size of each partition (via DBA_SEGMENTS) and then drops the oldest partition if the overall size is too large. But a single partition is likely not to have a huge level of granularity-- you're probably not going to partition by much more than the day, so dropping the oldest partition would purge all the logs for that day. You could potentially get more control over space by not partitioning the table and just deleting the last N rows if you are over the limit, but that probably involves much more frequent checks of space usage and is far, far less efficient in doing the actual deletes.
Justin

How to fix the size of table data in html

I want to fix the size of table data in html. ie if i want to insert only 50 char in a <td> field then it contain only 50 character, after that it switched to another line and contain the remaining character. Means <td> field wil not get automatically adjust there size according to data.

you cant specify how many characters a td cell can have but u can specify the pixel width of a td cell
<td width=50>
as long as you have wrap text on, then text will not force the box size over the 50 pixels
this wont limit it to only 50 chars though, you will probably have to use some javascript to cut the string down to size (unless youre using something like php or asp then that will do the trick too)

Fixing the row height in table

Hi All,
In my table column i am displaying address. Address field is of type STRING_TABLE. (This is needed to display address in the format shown in the example below) As a result of this the row height changes depending on the length of the address.
Hence all the rows in the table are of different heights.
For Example i am displaying the output as shown below.
39 Car Street,
abcdefg,
pincode
india,
ph no.
Now is it possible set the height of the row so that all the rows in the table are of fixed height?
Please help.
Thanks in advance.

closed

How to fix the size of the column in a table of ALV table type?

Hi all,
I want o fix the size of the ALV column.
Can any one help me out regarding this.
Regards,
Yugesh

* Data declarations for instantiation
DATA: l_ref_interfacecontroller TYPE REF TO iwci_salv_wd_table   ,
        l_ref_cmp_usage   TYPE REF TO if_wd_component_usage,
        l_value   TYPE REF TO cl_salv_wd_config_table   ,
* Instantiate the ALV
l_ref_cmp_usage =   wd_this->wd_cpuse_usg_alv_feclm( ) ."usg_alv_feclm is the name of your usage
IF l_ref_cmp_usage->has_active_component( ) IS INITIAL .
    l_ref_cmp_usage->create_component( )                 .
ENDIF                                                  .
* Get model
l_ref_interfacecontroller = wd_this->wd_cpifc_usg_alv_feclm( ).
l_value = l_ref_interfacecontroller->get_model( )             .

Fixing image size irrespective of the monitor's dimensions

Hi ,
I have an HTML region, which has an image displayed from WORKSPACE_IMAGES. This regions exists at column 3 and is in the midst of two other regions which are at coulmn 1 (navigation region) and 9 (side bar region). Apparently I want this image to extend completely in the middle region. For which, I have set the width and height of the image which suits my monitor and it works fine ().
But the problem is, this doesnot display properly when viewed in a different monitor dimension. This occupies the complete screen in case of a monitor of smaller dimension and shows up the empty background in case of monitor of higher dimension.
Could you please help me in fixing the size of the image irrespective of the monitor dimensions!
Thanks & regards,
Anasuya

Anasuya,
Your best bet is to pick a common monitor size and then develop your templates for that. Today, you'd be safe with 1024x768.
Using variable-width templates is more difficult to do, as the pages will look differently on smaller resolution screens than they do on larger resolution ones, and thus, you will have less control over the look and feel of your application.
Say you have a variable template with a 500 pixel image that is centered on the page; it may look fine on a 1024x768 screen, but as the size increases, the amount of white space on either side will also increase.
Most popular sites adhere to a fixed-width template; I recommend that you also investigate this option.
Thanks,
- Scott -

Fixing image size irrespective of the monitor dimensions

Hi ,
I have an HTML region, which has an image displayed from WORKSPACE_IMAGES. This regions exists at column 3 and is in the midst of two other regions which are at coulmn 1 (navigation region) and 9 (side bar region). Apparently I want this image to extend completely in the middle region. For which, I have set the width and height of the image which suits my monitor and it works fine (<img src=#WORKSPACE_IMAGES#Oracle_Corporation_HQ.jpg style="height:320px;" style="width:480px;" >).
But the problem is, this doesnot display properly when viewed in a different monitor size. This occupies the complete screen in case of a monitor of smaller dimension and shows up the empty background in case of monitor of higher dimension.
Could you please help me in fixing the size of the image irrespective of the monitor dimensions!
Thanks & regards,
Anasuya

Anasuya,
Your best bet is to pick a common monitor size and then develop your templates for that. Today, you'd be safe with 1024x768.
Using variable-width templates is more difficult to do, as the pages will look differently on smaller resolution screens than they do on larger resolution ones, and thus, you will have less control over the look and feel of your application.
Say you have a variable template with a 500 pixel image that is centered on the page; it may look fine on a 1024x768 screen, but as the size increases, the amount of white space on either side will also increase.
Most popular sites adhere to a fixed-width template; I recommend that you also investigate this option.
Thanks,
- Scott -

Getting "Table %TEMPLATE does not fit into window" error

Hello,
I am trying to print a form to an old EPSON DFX-9000 dot matrix printer and am getting the error message Table %TEMPLATE does not fit into window".
This only happens when I go to that printer. I can print fine to a laser printer.
I have tried creating a new device type and copying over the format from the laser printer, playing with the format, changing formats, ect.
I have adjusted the size of the window that my template cannot allegedly fit into but still no luck. I have checked the height and width of the template and the window many, many times and still get the same error.
Has anyone seen this before? Please help. Thanks.

Hi James,
You need to see the width and height of the Page Format which you have set in Form Attributes of your smartforms.
What ever you create should be within this width and height .
So accordingly adjust the width and height of your windows and components within them
Regards,
Dep

How to set up fixed height in ADF layout component

I try to create a page by having my main content at the center of page within a box using a fixed height. The idea is when the content is too long, a vertical scrollbar should show up for that box instead of stretching that box. I tried to use trh:tableLayout and set height attribute for trh:cellFormat component. However, instead of showing a vertical scrollbar, it just stretches table cell. Does anyone have a solution to this issue? Thanks.

Thanks for your fast reply. Yes, I already tried layout="vertical" which is not help. I am using JDeveloper 11.1.1.2.0. Actually what I want to do is I will display a block of information in a box area at the center of screen. If the information become too big for that box, I want a scrollbar to show up for that box instead of stretching that box to fit the content.

Row height in tables

Hello,
I want to set the height of tables rows but I couldn't find the function or the right way to do it.
The table is in Column mode.
The row size mode is set to Use Explicit Size
First I remove all rows and columns and then the following code:
InsertTableColumns (SA_ScatPosPanel, P_MULT_ROT_Z_TABLE, 1, NbX_Points, VAL_USE_MASTER_CELL_TYPE);
ColWidth = PlotAreaWidth / NbX_Points;
SetTableColumnAttribute (SA_ScatPosPanel, P_MULT_ROT_Z_TABLE, -1, ATTR_COLUMN_WIDTH, ColWidth);
InsertTableRows (SA_ScatPosPanel, P_MULT_ROT_Z_TABLE, 1, NbY_Points, VAL_USE_MASTER_CELL_TYPE);
What should I add for setting also the row heights?
Thank you
Solved!
Go to Solution.

I finally found the solution.
I did a mistake, by setting Size Mode to Use Explicit Size in the first row in the uir I thought it was the default value for all rows.
I think the documentation is not completely correct because it says that SetTableRowAttribute has no effect on existing cells but for the row height it has. That's the reason why I was looking to find a solution with SetTableCellRangeAttribute () as recommended.
I also tried with SetTableRowAttribute but because Size Mode was not correct it didn't work.
With this code it works:
for (i=1; i<=NbY_Points; i++)
InsertTableRows (SA_ScatPosPanel, P_MULT_ROT_Z_TABLE, i, 1, VAL_USE_MASTER_CELL_TYPE);
SetTableRowAttribute (SA_ScatPosPanel, P_MULT_ROT_Z_TABLE, i, ATTR_SIZE_MODE, VAL_USE_EXPLICIT_SIZE);
SetTableRowAttribute (SA_ScatPosPanel, P_MULT_ROT_Z_TABLE, i, ATTR_ROW_HEIGHT, RowHeight);

Set height size for each state enabling browser scrollbar if needed..

I'm working on a flex project, completely new to it. I'm trying to resize my application based on the set height size for each state. I'd like the wrapper to resize in the browser so that the browser's scroll bar appears if needed. hope this makes sense....
My enitial opening page I've set the height to 1000. now when I click on a link to another state from this page, we'll call it 'home' which i have set to 2000
The page opens in its 2000 height but no scroll bar appears to scroll down in the browser...
If anyone's done this or knows how to, I'd really appreciate your input.

I've done something similar with a few of my apps, you have to use a little javascript on the html page and the ExternalInterface class in your app. Basically, you need to resize the "browser's" height based on your flash file. So here's quick example:
In your html template page (which you can edit in your flashbuilder project panel ->html-template->indext.template.html)
in your html add the jscript function:
<script type="text/javascript">
function setWindowHeight(heightVal){
document.getElementById('theWindow').style.height=heightVal; // make sure to give the body tag an id of 'theWindow' or whatever
</script>
In your flashbuilder app you need to call the javascript fx, you can use the ExternalInterface class for this:
ExternalInterface.call('setWindowHeight',val+'px');
you need to send the jscript fx the height of your container or whatever you want it resized to....

Matrix Fixed Height

hi all,
i have matrix in a form created by screen painter. the size of the matrix is dynamic, the size of the height is different when in normal window size and maximize size. can i make it fixed height when in normal and maximize position ?
Thx and pardon me for broken english.

Hi Ivin,
If your form is resizable then I don't think there is a way to stop the matrix from automatically growing as the user resizes the form. However, you can trap the resize event of the form (when BeforeAction is false) and set the matrix height back to the value you want. If you freeze the form while you are doing this, the user will only see the matrix with the correct height.
Public Sub ResizeMatrix(ByVal sboForm As SAPbouiCOM.Form)
     Try
            sboForm.Freeze(True)
            ' Reset the height of the matrix to prevent it growing during form resize
            Dim sboItem As SAPbouiCOM.Item = sboForm.Items.Item("MYMATRIX")
            sboItem.Height = 150
            sboItem.Width = sboForm.Width - 30 'Adjust the matrix width to fit the new form size
        Finally
            sboForm.Freeze(False)
        End Try
End Sub
Kind Regards,
Owen

InDesign plugin that supports table templates?

I'm looking for an application or plugin for Indesign that supports the creation of table templates, or something similar. The idea would be to allow different data to be applied to a pre-designed table template in order to create multiple similar tables for a given InDesign document. Does anything like this exist out there?

1. What is the back-end server requirements to be able to render the finished PDFs?
You need either a Windows or Mac server and a licensed copy of Adobe InDesign Server ("IDS"). IDS takes SOAP requests that tell it what script to run, and scripting the server is generally the best approach unless you have some really special type of situation where a C++ plugin is needed. Certainly updating templates and generating PDF can be done with a script. You send a SOAP request to the server telling it what script to run and what template to load, and where to put the PDF. You can download a trial of IDS from Adobe.com.
2. Does anyone have experience building the InDesign Plugins that can connect to a back-end rendering server?
Our company, Silicon Publishing, has a ton of experience connecting to InDesign Server, as we have been a solution provider and re-seller 8 years, producing large-scale solutions for Shutterfly, Royal Carribean, Nike and many others. We can render on the server via plugins, CS and/or CC extensions, and/or scripting. This is definitely our sort of project, and we can either consult/train or build a complete solution. You can contact me at [email protected]

How to determine fixed line of table control using BDC program ?

Dear All,
I create program using BDC that contains table control.
Unfortunately the table control line of BDC program will depend on the resolution of our PC setting.
Sometime I have 2 lines, sometime 3 lines (in different PC).
How to determine fixed line of table control?
So it will never be confusing me whether I have 2 or 3 lines.
Thnx - Regards,
(Taufik K.)

Hi Taufik,
Check the table CTU_PARAMS and field DEFSIZE for setting fixed line of a table control.
CALL TRANSACTION 'VA01' USING it_bdcdata
OPTIONS FROM OPT
MESSAGES INTO it_mesg.
opt of type ctu_params.
WA_CTU_PARAMS-DISMODE = 'N'. "no screen mode
WA_CTU_PARAMS-UPDMODE = 'S'. "synchronus update
WA_CTU_PARAMS-NOBINPT = 'X'.
WA_CTU_PARAMS-NOBIEND = 'X'.
WA_CTU_PARAMS-DEFSIZE = 'X'. "Default size
Default size will play good role in terms of resoultion. in one system in table control you can see 10rows, but in others system it will show 20 records. it depends on resoultion. but when you set the default size then it will take same (default screen size) in all the systems when you run BDC.
Reward if helps.
Regards,
Senthil
Message was edited by: senthil kumar

ESS iviews height / size issue

Hi,
My ESS iViews (Web Dynpro Java) are appearing not in full height in the content area but a vertical scroll bar appears on right side. I tried following setting, though none worked:
- Height type to "Automatic" for both iView and Page and resetting Maximum Automatic height to a higher value i.e. 1500 pixels.
- Height type to "Full Page" for both iView and Page.
- Height type to "Fixed " for both iView and Page, setting "Fixed Height" value to higher value, 1500 pixels.
- Hight type to "Fixed" for Page, setting "Fixed Height" value to higher value, 1500 pixels and iView Height type to "Full Page".
- Hight type to "Fixed" for Page, setting "Fixed Height" value to higher value, 1500 pixels and iView Height type to "Automatic".
- Setting iView Isolation method to "URL" instead of "Embedded".
I searched the forum thoroughly for solutions, thus resulting in above Permutations but none worked. I tried searching for any suitable SAP Notes but could not find any for Web Dynpro Java, though there are a few for Web Dynpro ABAP.
Please help.
Thanks,
Aditya.

Hi All,
I tried with clearing the navigation cache and browser cache, opened the delta-linked iView from Page object and found same height values as that of iView object. This problem is appearing right since the ESS BP was installed. No changes were made to the framework page or desktop inner page. Other standard and custom iviews are appearing fine.
Is there anything from SPRO configuration (Homepage framework) that drives the iView/Page Appearance-Size property ?
I tried several combinations as mentioned above but of no avail.
Any help would be highly appretiated.
Thanks,
Aditya.

BI Publisher: Fixed height size table Template

Similar Messages

Maybe you are looking for