Calling 3rd party softwar from ABAP

hi all,
I would like to know is it possible, if yes, how to perform a call to launch external 3rd party software from ABAP (example, half way in process of a BDC session) and pass back the information from 3rd party software back to ABAP.
Thanks in advance!
Regards,
JL

Hi,
For that please refer to the following link:
http://help.sap.com/saphelp_nw70/helpdata/en/80/b711d7d6d03d4a956f16bb854a186e/frameset.htm
Regards,
Renjith Michael.

Similar Messages

How to call third party software from Ecc6 using ABAP

Hi all,
I need to execute a third party software using abap coding .
The software converts doc to pdf, the input from ecc6 would be the file path.
I need to do this using ABAP.
thanks
ziv.

Hi Ziv
You can use METHOD cl_gui_frontend_services=>execute
EXPORTING
application = <<<.exe file>>>
operation = 'OPEN'
to run .exe files
Best Regards
Yossi

Calling 3rd party service in ABAP

Hello Experts,
I am looking at a scenario, where I need to develop webservice which may invoke 3rd party services for some address verification purpose.
Do we generally create RFC expoed as webservice or model service in PI and then implement it in ABAP?
Also, do we need to create consumer proxies for 3rd party service or any other way possible in XI/PI?
I want to know how does the whole scenario typically developed?
Regards,
Damandeep

Hi,
If you have PI in scope, I would recommend including it in the scenario. So basically develop a SOAP to Proxy scenario in PI (or SOAP to RFC, but I would prefer the first one because of monitoring purposes). Try searching SDN to find multiple examples.
Hope this helps,
Greg

No video stream when calling 3rd party endpoint from Jabber client

I use my own H323 client based on the H323Plus open source. It works very well with VCS and all endpoints we tried (a dozen or so from every vendor). We have a problem with Jabber Video though, across all versions from MOVI to 4.4.3. When my own client calls Jabber everything works as it should. However, when Jabber calls my client then (1) it takes up to a minute for Jabber to display incoming video and (2) Jabber does not create outgoing video stream. This behavior is 100% reproducible across all PCs we tried. Jabber is registered with either VCS Starter Pack or VCS Control, sofwtare version 6.1 in both cases. We do not use provisioning at this time.
In Jabber logs there is a unclear hint about insufficient resources (bandwidth?) for the video stream. VCS configuration is fine (it works with all other clients like e20) and I do not see anything useful in VCS logs.
To narrow the discussion, this is NOT a firewall, client camera or driver, OS misconfiguration or any other external issue. It is Jabber video having problem negotiating capabilities and/or resources but only it initiates the call. Where should I look for a solution?

I was afraid this will end this way. I hoped you might have had such a case solved already :-).
Audio works fine, no problem at all. The video packets are not sent from my client to Jabber while in the 1 minute wait; the stream from Jabber is not even started. I still think I need Wireshark to decode H225 traffic. Good idea with the interworking log - I was too lazy to go the OS layer. As you surely know, only 2 of the VCS logs are available from the Web interface.
thanks for your help!

Calling third party software from LabVIEW

Hi All,
In one of the requirement, I need to open the Debugger(AXD debugger) then needs to send some commands from it.
Is it possible to invoke debugger from LabVIEW and work on specific text boxes in the debugger.
Details : APIs or DLLs related to debugger are not exposed to outside world.
I am using teststand3.1 software as manangement tool.
AXD debugger runs on Windows.
Is any body come across similar type of issue ?,,Please suggest me the way to wokr on it.
Regards,
KHN

If you cross post to multiple forums, please provide a link to your other posts.

How to remove the stubborn 3rd party software from my curve

Here are the softwares that I want to remove-
ICQ, AIM, Myspace, Yahoo search, Google talk, Yahoo messenger, Window Live messenger... I never use those softwares. I tried using desktop manager, those softwares aren't even on the list. And, I tried to use applications under advanced options, it did remove from the list then reboot the curve, they still come back on the curve. They are so stubborn! Can anyone help?
Thanks,
Amy

once you remoe them from applications they are gone. When you restart your device, only the icon comes back, if you were to actually click on that icon, it wont run the program, it will download and install it first. The reason for this is because its part of your plan from your carrier and is always pushed back to your device. if you ahve them uninstalled, u are saving space, then just hide the install icon.

Why buy 3rd party software from app store?

I want to buy the home accounting software YNAB. I could buy it directly from the vendor or (for the same price) from the Mac App Store. (Apple takes 1/3 of the price; I care about that, but only slightly.) With the receipt, the vendor will also allow me to use the product on its own, on multiple devices, with no reference to the App Store, and on Windows machines (which I don't have). Or, buying YNAB from the App Store, I can use it with any device that I am sharing with. Someone can correct me if I have misunderstood the details of these two ways to buy the software. Will these differences matter at all to me? I'm trying to imagine a scenario where one or the other is preferable.

Minor updates from the MAS are free, major version upgrades are usually paid. However, it isn't up to Apple, it is the developer's choice whether to issue upgrades for free. The issue is that Apple isn't going to get in the middle of giving the app as a free upgrade and selling the same version as a paid app. The version is either a paid app or a free app.
You are able to install the apps from the MAS on as many Macs as you own or have in your control. A Mac belonging to your employer, but which you share with other employees, is not in your control. A Mac issued to you by your employer for your sole use, is in your control.

Raising a notification from 3rd party software

Hi
We have a client looking at raising notifications within the asset management system of SAP via a sql/.net software application. The 3rd party software has a defect register which could be used to open the SAP notification. We would like to populate the fields automatically when the notification is opened.
Is there a current feature within SAP to raise single or multiple notifications via a 3rd party application?
Cheers
Russell

Hi russel,
Things are where they were.
Any Function Module(BAPI here) is the ABAP part. So the solution involves 3 parties. The BAPI suggested helps in creating a Notification by receiving parameters as Inputs. Where these parameters come from? These come from 3rd party software (you called so) through interface (XI here)
Flow is like this.
Interface (XI) - Receives parameters from your Browser (assumed you called it 3rd party) and translates into SAP field names and values.
ABAP - Receives these inputs, feeds to the BAPI the output of which is a Notification.
Note:
BAPI_ALM_NOTIF_CREATE is a Notification creation tool (Function module) in ABAP. This receives SAP field values as inputs and generates a Notification. It has got a wide range of applications in regular SAP developments.
Regards
KJogeswaraRao

Will upgrading on to OS X Mavericks (from Snow Leopard 10.6.8) affect the running of the installed 3rd party softwares/programs?

I have just received an email encouraging me to upgrading on to OS X Mavericks (from Snow Leopard 10.6.8). Currently I do have in my computer several 3rd party software and programs (from Adobestuff, finalcut Pro, MS Office, ILife etc.
Will upgrading to OS X Mavericks affect the running of these software /programs? Will I need to also upgrade these softwares?

There may be issues with compatibilty, as with any OS upgrade. Snow leopard (10.6.N) includes a piece of software from Apple called Rosetta. This software allows older PowerPC applications to run on Intel based Macs. This software does not run on any OS X higher than the latest Snow Leopard, 10.6.8. You can see if you have any of programs that require Rosetta installed by bringing up the "System Information" application through spotlight (click on the magnifying glass icon on the upper right, type System Information in the search field and select the application thta is found).
Once in System Information select "Applications" under "Software" near the bottom of the list. Scroll through the list of applications and if any indicate that they are PowerPC based then they will not run under Lion, Mountain Lion or Mavericks.
Hope this helps.

How do I transfer photo files from desktop to ipad without 3rd party software?

how do I transfer photo and music files from my laptop to ipad2 without purchasing a 3rd party software?

You can use iTunes which is free (http://www.apple.com/itunes) - and that is the only way to sync music from a computer to the iPad
Syncing photos via iTunes : http://support.apple.com/kb/HT4236 . You need to sync all photos that you want on the iPad together in one go, as only the most recent remains on the iPad - not including photos in a subsequent sync is how you delete them from the iPad

Migration of Documents from 3rd party software to SAP DMS

Dear Experts,
We have implemented SAP DMS . Prior to DMS we were using Third party software for creating and storing the documents.
There are abot 3000 documents in the third party software, now the challege is how we must have to migrate the DATA from 3rd party software to SAP DMS with creating Dirs. Are there any upload programmes suffice the requirement or any development needs to be done or any possibilities.
Kindly help me out in the above scenario.
Regards
jayanth

Hi,
from DMS point of view I think that SDXA functionality could also be useful for this action. For further information on SXDA functions please see SAP note 817743.
Best regards,
Christoph

I have a PVR which supports DLNA connected to my home network. I want to access files on my MacBook from the PVR. I understand that my MacBook doesn't support DLNA. Is there any 3rd party software that I can install on my MacBook to provide DLNA?

Hi,
Can anyone help me please.
I have a Personal Video Recorder (Humax HDR-1010S), which supports DLNA, connected to my home network via Wi-Fi.
I want to play music from iTunes and view photos from iPhoto from my MacBook (which is also connected to the home network) via the PVR / TV / Home Cinema sound system. I understand that my MacBook (running OS X Mavericks) doesn't support DLNA server.
Is there any 3rd party software that I can install on my MacBook to provide DLNA server?
Thanks,

My recollection is that the iPhoto library has some fairly robust protections to prevent inadvertent or even deliberate changes being made that might have unwanted consequences. I'll take alook at my setup and let you know if I can see anything that might help you. Even if you get Serviio to "see" the iPhoto library, it almost ceratinly won't show the album structure and names. What I did is to export each iPhoto album to a standard folder with the appropriate folder name. These I keep on an external backup disc and Serviio can see these without trouble.

Allow 3rd party software to collect emails from Exchange server 2010

i have a hosed client based ticket system that i use for my internal and external customers. i would like to have each person who wants to create a ticket use and an email address [email protected]
I've already created the email address and it works for internal and external. you can access the account using OWA. the problem i'm having is the hosed 3rd party software wants to connect and collect emails every 15 minutes. the directions they have use
IMAP and POP. how do i allow that 3rd party to collect emails from that email address? without created a security hole? don;t want to be hit by spammers or be on a blacklist. please help

Hi Donlancellotta,
From your description, I'm so confused that can't understand what your requirement is.
Could you explain more about your requirement?
What is the "collect emails" mean?
Best regards,
Niko Cheng
TechNet Community Support

Unable to extract updates from 3rd party software

When trying to update 3rd party software on my MacBook I get the forllowing error "An error occurred while extracting the archive. Please try again later." . I have no clue what to do. Does anyone else have an idea?

I checked the web sites, and both have the current version available as a dmg download. You might try just downloading the latest version from respective web sites, see if you can then mount the dmg and install the latest version that way. It sounds like for some reason the built-in updater in the programs is having a problem in Snow Leopard.
Francine
Francine
Schwieder

Would it be possible for time machine to back-up files from 3rd party software such as windows platform using parallel?

I'm wondering if it would be possible for time machine to back-up files from 3rd party software such as Windows XP using parallel software especially if it is isolated from mac? Any advise would be greatly aprreciated.

Short answer - yes Time Machine will backup everything within the Mac OS system.
Longer answer - Parallels creates a pvm disk image "Parallels Virtual Machine" which Time Machine backs up.
Due to the changes to the pvm file Time Machine is unable to read the minor changes and will somtimes do a full backup of it each time Time Machine runs and can chew through Back up drive space quite quickly.

Calling 3rd party softwar from ABAP

Similar Messages

Maybe you are looking for